Electrochemistry of chemotherapeutic alkylating agents and their interaction with DNA.

Alkylating agents were among the first anticancer drugs to be discovered and continue to be the most commonly used in chemotherapy. They are electrophiles that react with the ring nitrogen and extracyclic oxygen atoms of DNA bases, forming covalent adducts that further lead to cross-linking of DNA strands, abnormal base pairing or DNA strand breaks. The investigation and quantitative analysis of alkylating agents in biological samples are essential for monitoring the therapy progression and efficiency, understanding their pharmacokinetics and develop new more effective and specific chemotherapeutical drugs. Among biotechnological methods, electrochemical techniques are particularly important in pharmaceutical medicine, owing to their rapid detection, great sensitivity, robustness, exceptional detection limits, ability to be used with small analyte volumes in turbid biofluids, and easy adaptability to miniaturization and point-of-care (POC) testing. This article provides first an exhaustive review concerning the electrochemical methods of characterization and quantification of different classes of chemotherapeutic alkylating agents (triazenes and hydrazines, nitrosoureas, nitrogen mustards, oxazaphosphorines, alkyl alkane sulfonates and ethylene imines) in standard samples, pharmaceutical formulations and biological matrixes. The second part of the article focuses on the recent electrochemical methodologies and DNA-electrochemical biosensors developed to study the interaction of alkylating agents with DNA. These studies are relevant for obtaining real-time details about the alkylating agents' mechanism of action and for assessing the oxidative DNA damage they cause, important for the development of improved antineoplastic drugs.

Novel Pyrene Excimer and Fluorogenic Probe for the Detection of Alkylating Agents.

A pyrene-containing salicylic acid derivative (4) was found to be low in fluorescence, but its derivative pyrene-containing methyl salicylate (3) was found to be highly fluorescent in aqueous solution. This derivative has been tested in solution and found to be superior in the fluorogenic assay of pharmaceutical compounds, detection of chemical warfare agents, a preliminary toxicology test, mutagenicity of medicinal compounds, and other chemical analyses, including trimethylsilyl diazomethane; alkyl bromides and iodides; a sulfur mustard mimic 2-chloroethyl ethyl sulfide; and anticancer drugs, busulfan and pipobroman. The salicylic acid derivative (4) was applied as a fluorogenic probe for the detection of alkylating agents by esterification and generating fluorescence at 475 nm in solutions at low concentrations.

Colorimetric Detection of Carcinogenic Alkylating Fumigants on Nylon-6 Nanofibrous Membrane. Part I: Investigation of 4-( p-Nitrobenzyl)pyridine as a "New" Sensing Agent with Ultrahigh Sensitivity.

Alkylating fumigants are widely used in agricultural production for the control of soil-borne pests, but the acute toxicity and carcinogenicity of these chemicals pose a health threat to farm workers, as well as residents. A nanofibrous membrane-based colorimetric sensor relying on the nucleophilic substitution reaction of 4-( p-nitrobenzyl)pyridine (NBP) is introduced for the convenient and portable detection of alkylating fumigants. Comparing with the traditional use of NBP in detecting alkylating agents, this sensor system achieves a parts per billion level detection sensitivity toward alkylating fumigant gases without a high-temperature incubation or the addition of extra bases. The mechanisms of the detection reaction and the detection sensitivities of different fumigants were studied with computational methods, and the results comprehensively prove the proposed optimized detection mechanisms. The detection limit of methyl iodide, methyl bromide, and 1,3-dichloropropene successfully reaches to the limiting exposure concentrations (PEL or REL) with a naked-eye detectable color difference within 5 min with a dynamic detection procedure. The designed sensing system is promising for a real-time monitoring of the air quality related to alkylating fumigants in the environment, especially in agricultural and industrial areas.

Direct-acting DNA ethylating agents associated with tobacco use primarily originate from the tobacco itself, not combustion.

Unburnt tobacco and tobacco smoke contain a variety of carcinogens, exposure to which are causally associated with the incidence of several human cancers. Herein, we used isotope-dilution LC-MS/MS for the quantification of alkylated purines in DNA, following in vitro exposure to aqueous extracts of tobacco itself, and tobacco smoke. Our results demonstrated the presence of direct-acting ethylating agent(s) in unburnt tobacco, which 4.0-6.3 times exceeded that in the particulate phase of sidestream cigarette smoke and 6.8-8.9 times exceeded that in mainstream smoke. Interestingly, particulate phase of sidestream cigarette smoke exhibited higher ethylating potency than that in mainstream smoke. This finding refutes the previous assumptions that the ethylating agent(s) associated with smoking, are derived from cigarette smoke. Indeed, our data show that combustion of tobacco actually decreases the ethylating potency of tobacco. Although the identity of this agent(s) remains unknown, our data suggest that it is highly hydrophilic, and hence likely to be easily extracted by saliva. This would allow intimate contact with the tissues of the oropharyngeal cavity. Taken together, these results have profound implications for tobacco use, in particular for tobacco chewers and passive smokers, whose exposure to ethylating agent(s) is greater than previously thought.

Determination of 23 perfluorinated alkylated substances in water and suspended particles by ultra-performance liquid chromatography/tandem mass spectrometry.

A practical multi-residue method based on ultra-performance liquid chromatography/tandem mass spectrometry was developed for the simultaneous determination of 23 perfluorinated alkylated substances (PFASs) in water and suspended particles. Suspended particle samples were extracted with 1% formic acid-acetonitrile and cleaned by matrix solid phase dispersion extraction using a C18 sorbent and graphitized carbon black. Water samples were filtered through 0.7-µm glass fiber membranes and enriched utilizing weak anion exchange cartridges. The eluent was dried under a gentle stream of N2 at 45°C and suspended in 1 mL acetonitrile-5 mM ammonium acetate (1:1, vol:vol). Gradient elution for chromatographic separation utilized acetonitrile and 5 mM ammonium acetate as mobile phases on a reverse phase C18 column. The compounds were quantified using an internal standard method in multiple reaction-monitoring mode. Limits of detection and quantitation of the 23 PFAS test compounds in water samples were 0.5-10 ng L-1 and 2-20 ng L-1, respectively. Recoveries at three fortified levels of 20, 50, and 200 ng L-1 ranged from 68.5% to 118% with relative standard deviations below 9.6%. We used this method to determine PFAS levels in real water and suspended particle samples and found high sensitivity and good reproducibility.

Extraction-spectrophotometric determination of tris(2-chloroethyl)amine using phthaleins.

Procedures for the extraction-spectrophotometric determination of tris(2-chloroethyl)amine, an alkylating agent known as a drug as well as a chemical warfare agent (nitrogen mustard HN-3), with 7 acid-base indicators of a triphenylmethane lactone type, phthaleins, were developed. Representatives of phthaleins without an oxygen bridge (thymolphthalein, o-cresolphthalein, naphtholphthalein) and with an oxygen bridge (fluorescein, 2',7'-dichlorofluorescein, eosin B and eosin Y) were used. The methods were based on the formation of ion pair complexes. Chloroform was used as a non-polar solvent for an extraction. The conditions to determine were optimized for the optimal pH of the buffer and the concentration of a phthalein as a reagent. The dependence on the reaction time in a water phase and the stoichiometry of extraction products were studied. The detection limits and the limits of the determination of separate procedures and conditional extraction constants were determined. Comparison with the spectrophotometric method of the group determination of alkyl halides and acyl halides using alkaline ethanol-water solution of thymolphthalein, the so-called T-135 agent, was conducted. While studying the selectivity, the possible interference of bis(2-chloroethyl)sulphide and 3 nitrogen mustards in the proposed procedures were verified. Copyright © 2016 John Wiley & Sons, Ltd.

When alcohol is the answer: Trapping, identifying and quantifying simple alkylating species in aqueous environments.

Alkylating agents are a significant class of environmental carcinogens as well as commonly used anticancer therapeutics. Traditional alkylating activity assays have utilized the colorimetric reagent 4-(4-nitrobenzyl)pyridine (4NBP). However, 4NBP based assays have a relatively low sensitivity towards harder, more oxophilic alkylating species and are not well suited for the identification of the trapped alkyl moiety due to adduct instability. Herein we describe a method using water as the trapping agent which permits the trapping of simple alkylating electrophiles with a comparatively wide range of softness/hardness and permits the identification of donated simple alkyl moieties.

Pharmacogenomic study using bio- and nanobioelectrochemistry: Drug-DNA interaction.

Small molecules that bind genomic DNA have proven that they can be effective anticancer, antibiotic and antiviral therapeutic agents that affect the well-being of millions of people worldwide. Drug-DNA interaction affects DNA replication and division; causes strand breaks, and mutations. Therefore, the investigation of drug-DNA interaction is needed to understand the mechanism of drug action as well as in designing DNA-targeted drugs. On the other hand, the interaction between DNA and drugs can cause chemical and conformational modifications and, thus, variation of the electrochemical properties of nucleobases. For this purpose, electrochemical methods/biosensors can be used toward detection of drug-DNA interactions. The present paper reviews the drug-DNA interactions, their types and applications of electrochemical techniques used to study interactions between DNA and drugs or small ligand molecules that are potentially of pharmaceutical interest. The results are used to determine drug binding sites and sequence preference, as well as conformational changes due to drug-DNA interactions. Also, the intention of this review is to give an overview of the present state of the drug-DNA interaction cognition. The applications of electrochemical techniques for investigation of drug-DNA interaction were reviewed and we have discussed the type of qualitative or quantitative information that can be obtained from the use of each technique.

Concentration Accuracy of Compounded Mitomycin C for Ophthalmic Surgery.

IMPORTANCE: Ophthalmologists rely on accurate concentrations of mitomycin C (MMC) to prevent scarring with trabeculectomy surgery. To our knowledge, the concentration accuracy and variability of compounded MMC are unknown. OBJECTIVE: To determine whether the measured concentration differs from the expected concentration of 0.4 mg/mL of MMC used in ophthalmic surgery. DESIGN, SETTING, AND PARTICIPANTS: Laboratory experimental investigation conducted in July 2013. We acquired 60 samples of 0.4 mg/mL of MMC from a spectrum of common compounding and storage techniques (refrigeration, freezing, and immediately compounded dry powder) and a variety of pharmacies (an academic hospital, a community hospital, and an independent Pharmacy Compounding Accreditation Board-accredited pharmacy). We used C18 reversed-phase high-performance liquid chromatography to measure the MMC concentration of all samples. We used pure MMC (Medisca Inc) to generate calibration curves and sulfanilamide as an internal standard. MAIN OUTCOMES AND MEASURES: We calculated MMC concentration using a calibration curve (range, 0.3-0.5 mg/mL) generated by dividing MMC peak area by internal standard peak area and plotting the area ratio against the calibrant concentrations. We compared the measured concentration against the expected 0.4 mg/mL concentration for all samples. RESULTS: Measurement of MMC using the high-performance liquid chromatography method demonstrated acceptable accuracy (92%-100%), precision (2%-6% coefficient of variation), and linearity (mean correlation coefficient of r2 = 0.99). The measured MMC concentration determined using the high-performance liquid chromatography method for all samples was 12.5% lower than the expected 0.4 mg/mL value (mean [SD], 0.35 [0.04] mg/mL; 95% CI, 0.34-0.36; P < .001) with a wide concentration range between 0.26 and 0.46 mg/mL. CONCLUSIONS AND RELEVANCE: Common compounding and storage techniques for MMC resulted in a lower accuracy and wider range of concentration than expected. These differences in concentration may result from compounding techniques and/or MMC degradation. Variability in MMC concentration could cause inconsistency in glaucoma surgical results, but the clinical relevance of such findings on glaucoma surgery outcomes remains unknown.

New validated LC-MS/MS method for the determination of three alkylated adenines in human urine and its application to the monitoring of alkylating agents in cigarette smoke.

A highly specific liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed for simultaneous determination of urinary N(3)-methyladenine (N(3)-MeA), N(3)-ethyladenine (N(3)-EtA), and N(3)-(2-hydroxyethyl)adenine (N(3)-HOEtA). Chromatographic separation was achieved on a hydrophilic interaction liquid chromatography column, with a mobile phase gradient prepared from aqueous 10 mM ammonium formate-acetonitrile (5:95 v/v, pH 4.0). Quantification of the analytes was done by multiple reaction monitoring using a triple-quadrupole mass spectrometer in positive-ionization mode. The limits of quantification were 0.13, 0.02, and 0.03 ng/mL for N(3)-MeA, N(3)-EtA, and N(3)-HOEtA, respectively. Intraday and interday variations (relative standard deviations) ranged from 0.6 to 1.3 % and from 3.7 to 7.5 %. The recovery ranges of N(3)-MeA, N(3)-EtA, and N(3)-HOEtA in urine were 80.1-97.3 %, 83.3-90.0 %, and 100.0-110.0 %, respectively. The proposed method was successfully applied to urine samples from 251 volunteers including 193 regular smokers and 58 nonsmokers. The results showed that the levels of urinary N(3)-MeA, N(3)-EtA, and N(3)-HOEtA in smokers were significantly higher than those in nonsmokers. Furthermore, the level of urinary N(3)-MeA in smokers was found to be positively correlated with the level of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (r = 0.48, P < 0.001, N = 192). This method is appropriate for routine analysis and accurate quantification of N(3)-MeA, N(3)-EtA, and N(3)-HOEtA. It is also a useful tool for the surveillance of alkylating agent exposure.

Development and validation of a sensitive GC-MS method for the determination of alkylating agent, 4-chloro-1-butanol, in active pharmaceutical ingredients.

The analysis of genotoxic impurities (GTIs) in active pharmaceutical ingredients (APIs) is a challenging task. The target detection limit (DL) in an API is typically around 1 ppm (1 µg/g API). Therefore, a sensitive and selective analytical method is required for their analysis. 4-Chloro-1-butanol, an alkylating agent, is one of the GTIs. It is generated when tetrahydrofuran and hydrochloric acid are used during the synthesis of the APIs. In this study, a sensitive and robust gas chromatography-mass spectrometry (GC-MS) method was developed and validated for the identification of 4-chloro-1-butanol in APIs. In the GC-MS method, 3-chloro-1-butanol was employed as an internal standard to ensure accuracy and precision. Linearity was observed over the range 0.08 to 40 ppm (µg/g API), with a R(2) value of 0.9999. The DL and quantitation limit (QL) obtained were 0.05 ppm and 0.08 ppm (0.13 ng/mL and 0.20 ng/mL as the 4-chloro-1-butanol concentration), respectively. These DL and QL values are well over the threshold specified in the guidelines. The accuracy (recovery) of detection ranged from 90.5 to 108.7% between 0.4 ppm and 20 ppm of 4-chloro-1-butanol. The relative standard deviation in the repeatability of the spiked recovery test was 6.0%. These results indicate the validity of the GC-MS method developed in this study. The GC-MS method was applied for the determination of 4-chloro-1-butanol in the API (Compound A), which is under clinical trials. No 4-chloro-1-butanol was found in Compound A (below QL, 0.08 ppm).

Assay at low ppm level of dimethyl sulfate in starting materials for API synthesis using derivatization in ionic liquid media and LC-MS.

Dimethyl sulfate (DMS) is frequently used in pharmaceutical manufacturing processes as an alkylating agent. Trace levels of DMS in drug substances should be carefully monitored since the compound can become an impurity which is genotoxic in nature. Derivatization of DMS with dibenzazepine leads to formation of the N-methyl derivative, which can be retained on a reversed phase column and subsequently separated from other potential impurities. Such derivatization occurs relatively slowly. However, it can be substantially speed up if ionic liquids are used as reaction media. In this paper we report the use of 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (IL1) and 1-butyl-4-methylpyridinium tetrafluoroborate (IL2) as reaction media for the derivatization of DMS with dibenzazepine. It was determined that the stoichiometry between the substrate and DMS may be 1:1 or 2:1, in relation with the nature of the reaction media. An (+)ESI-MS/MS approach was used for quantitation of the derivatized product. Alternatively, DMS derivatization may be carried out with pyridine in acetonitrile (ACN). The N-methylpyridinium derivative was separated by hydrophilic interaction liquid chromatography (HILIC) and detected through (+)ESI-MS (in the SIM mode). In both cases, a limit of quantitation (LOQ) of 0.05 µg/ml DMS was achievable, with a linearity range up to 10 µg/ml. Both analytical alternatives were applied to assay DMS in 4-(2-methoxyethyl)phenol, which is used as a starting material in the synthesis of metoprolol.

Alkylation of sperm DNA is associated with male factor infertility and a reduction in the proportion of oocytes fertilised during assisted reproduction.

Approximately one-third of IVF cases in the UK are attributed to male factor infertility and in the majority of cases the origin of male infertility is unknown. The integrity of sperm DNA is important both for the success of assisted reproduction and the implications for the off-spring. One type of DNA damage that has not been investigated with respect to fertility outcomes is the adduct N7-methyldeoxyguanosine (N7-MedG), a biomarker for exposure to alkylating agents. A prospective cohort of couples attending for IVF had their N7-MedG levels in sperm measured using an immunoslot blot technique to examine whether sperm N7-MedG levels are associated with male factor infertility, semen quality measures or assisted reproduction outcomes. Sufficient DNA for analysis was obtained from 67/97 couples and N7-MedG was detected in 94% of sperm samples analysed. Men diagnosed with male factor infertility had significantly higher mean levels of N7-MedG in their sperm DNA (P=0.03). Logistic regression analysis showed that N7-MedG levels were significantly negatively associated with the proportion of oocytes successfully fertilised irrespective of the method of fertilisation used (IVF or intra-cytoplasmic sperm injection; ICSI, P<0.001). Therefore exposure to DNA alkylating agents is significantly associated with male infertility and the proportion of oocytes fertilised during assisted reproduction. Reducing such exposure may improve male fertility but further work is required to determine the relative importance of exogenous and endogenous sources of exposure.

Matrix deactivation: A general approach to improve stability of unstable and reactive pharmaceutical genotoxic impurities for trace analysis.

Trace analysis of unstable and reactive pharmaceutical genotoxic impurities (GTIs) is a challenging task in pharmaceutical analysis. Many method issues such as insufficient sensitivity, poor precision, and unusual (too high/low) spiking recovery are often directly related to analytes' instability. We report herein a matrix deactivation approach that chemically stabilizes these analytes for analytical method development. In contrast to the conventional chemical derivatization approach where the analytes are transformed into stable detectable species, the matrix deactivation approach chemically deactivates the hypothetical reactive species in the sample matrix. The matrix deactivation approach was developed on the premise that the instability of certain analytes at trace level is caused by reactions between the analytes and low level reactive species in the sample matrix. Thus, quenching the reactivity of the reactive species would be a key to stabilizing the unstable and reactive analytes. For example, electrophilic alkylators could be destabilized by nucleophiles or bases through either nucleophilic substitution or elimination reactions. One way to mask those reactive species is via protonation by adding acids to the diluent. Alternatively, one can use nucleophile scavengers to deplete reactive unknown species in the sample matrix completely, in analogy to the use of antioxidants and metal chelators to prevent oxidation in the analysis of compounds liable to oxidation. This paper reports the application of the matrix deactivation to the analyses of unstable and reactive pharmaceutical genotoxic impurities. Some of the methods have been used to support development of manufacturing processes for drug substances and a recent regulatory filing.

Análisis inferencial de las potencialidades de promoción de absorción de una familia de 1-O-alquil gliceroles / Inferable analysis related to promotion of the absorption potentialities from 1-O-alkyl glycerol family

La interrelación entre las propiedades físico-químicas y la biodisponibilidad de una familia de 1-O-alquil gliceroles son discutidas, se han utilizado como compuestos de referencia, moléculas que presentan una analogía estructural-funcional con estos compuestos, los cuales han sido reconocidos como agentes promotores clase I, de alta capacidad. El enfoque TOPS-MODE (ModesLab) fue utilizado para estimar los momentos espectrales, con diferentes ponderaciones, como descriptores de las propiedades físico-químicas más relevantes utilizadas en los modelos predictivos de permeabilidad intestinal obtenidos, e interpretar estos en términos de contribución de grupos funcionales de los 1-O-alquil gliceroles. A partir de este análisis se establecieron interpretaciones de tipo inferencial sobre las reales potencialidades teóricas de esta familia para su evaluación perspectiva como agentes promotores de absorción clase I. Este enfoque de tamizaje in sílico asistido por computadora permitió postular que los 1-O-alquil gliceroles, en particular el 1-O-hexadecil glicerol y 1-O-octadecil glicerol, son excelentes candidatos para demostrar su elevada capacidad promotora en estudios in vivo, los que han alcanzado altos niveles porcentuales de biodisponibilidad (> 90 por ciento). Se concluye, según análisis por discriminante, que todos los miembros de la familia presentaron potencialidades para la absorción gastrointestinal.

The interrelation among the physical-chemical properties and the bioavailability of a 1-O-alkyl glycerol family is discussed. As reference compounds we used molecules presenting a structural-functional similarity with these compounds, which have been recognized as class I high quality promoting agents. TOPS-MODE approach (ModesLab) was used to estimate spectral moments with different weighing as descriptors of the more relevant physical-chemical properties used in the achieved predictive models of intestinal permeability, and its interpretation in terms of contribution of 1-O-alkyl glycerols functional groups of. From this analysis we established inferred interpretations on the theoretical potentials of this family for its prospective evaluation as promoting agents of class I absorption. This computer-assisted in silico screening approach allowed us to call for that 1-O-alkin glycerols, particularly in the 1-O-hexadecyl glycerol, and 1-O-octadecil glycerol, are excellent candidates to demonstrate its high promotion capacity according to in vivo studies, which have gained percentage high levels of bioavailability (> 90 ). We conclude that according a discriminating analysis, all family members had potentials for gastrointestinal absorption.

Análisis inferencial de las potencialidades de promoción de absorción de una familia de 1-O-alquil gliceroles / Inferable analysis related to promotion of the absorption potentialities from 1-O-alkyl glycerol family

La interrelación entre las propiedades físico-químicas y la biodisponibilidad de una familia de 1-O-alquil gliceroles son discutidas, se han utilizado como compuestos de referencia, moléculas que presentan una analogía estructural-funcional con estos compuestos, los cuales han sido reconocidos como agentes promotores clase I, de alta capacidad. El enfoque TOPS-MODE (ModesLab) fue utilizado para estimar los momentos espectrales, con diferentes ponderaciones, como descriptores de las propiedades físico-químicas más relevantes utilizadas en los modelos predictivos de permeabilidad intestinal obtenidos, e interpretar estos en términos de contribución de grupos funcionales de los 1-O-alquil gliceroles. A partir de este análisis se establecieron interpretaciones de tipo inferencial sobre las reales potencialidades teóricas de esta familia para su evaluación perspectiva como agentes promotores de absorción clase I. Este enfoque de tamizaje in sílico asistido por computadora permitió postular que los 1-O-alquil gliceroles, en particular el 1-O-hexadecil glicerol y 1-O-octadecil glicerol, son excelentes candidatos para demostrar su elevada capacidad promotora en estudios in vivo, los que han alcanzado altos niveles porcentuales de biodisponibilidad (> 90 por ciento). Se concluye, según análisis por discriminante, que todos los miembros de la familia presentaron potencialidades para la absorción gastrointestinal(AU)

The interrelation among the physical-chemical properties and the bioavailability of a 1-O-alkyl glycerol family is discussed. As reference compounds we used molecules presenting a structural-functional similarity with these compounds, which have been recognized as class I high quality promoting agents. TOPS-MODE approach (ModesLab) was used to estimate spectral moments with different weighing as descriptors of the more relevant physical-chemical properties used in the achieved predictive models of intestinal permeability, and its interpretation in terms of contribution of 1-O-alkyl glycerols functional groups of. From this analysis we established inferred interpretations on the theoretical potentials of this family for its prospective evaluation as promoting agents of class I absorption. This computer-assisted in silico screening approach allowed us to call for that 1-O-alkin glycerols, particularly in the 1-O-hexadecyl glycerol, and 1-O-octadecil glycerol, are excellent candidates to demonstrate its high promotion capacity according to in vivo studies, which have gained percentage high levels of bioavailability (> 90 ). We conclude that according a discriminating analysis, all family members had potentials for gastrointestinal absorption(AU)

The Viracept-EMS case: impact and outlook.

This perspective first considers the potential impact of the Viracept-EMS case in the framework of the current understanding of the low-dose effects of DNA-reactive chemicals and the approaches used to estimate health risks from genotoxins occurring as impurities in pharmaceutical products or as contaminants in the environment or workplace. It also presents an outlook on the nature of additional research building upon the Viracept-EMS case to test assumptions underlying thresholded dose-response relationships and to establish biologically based risk assessment models in lieu of default models for DNA-reactive compounds.

Ethyl methanesulfonate toxicity in Viracept--a comprehensive human risk assessment based on threshold data for genotoxicity.

Based on a production accident Viracept (nelfinavir mesilate) tablets, an HIV protease inhibitor supplied by Roche outside the US, Canada and Japan was contaminated with relatively high levels of ethyl methanesulfonate (EMS) for at most 3 months in spring of 2007. On the basis of a wide variety of toxicological data including critical experiments for mutation induction under chronic exposure conditions and cross-species exposure scaling experiments to extrapolate to humans, we estimate the added risk of adverse effects (cancer, birth abnormalities, heritable defects) in any individual patient accidentally exposed to EMS via contaminated Viracept tablets in the context of this production accident as essentially zero. Of critical important for this risk assessment are pivotal in vivo genotoxicity studies (MNT, MutaMouse) providing evidence for 'hockey-stick', like dose-response relationships for the risk defining induction of gene mutations and chromosomal damage by EMS [Gocke, E., Müller, L., Pfister, T., Buergin, H., 2009a. Literature review on the genotoxicity, reproductive toxicity, and carcinogenicity of ethyl methanesulfonate. Toxicol. Lett.; Gocke, E., Müller, L., Pfister, T., 2009b. EMS in Viracept-initial ('traditional') assessment of risk to patients based on linear dose response relations. Toxicol. Lett.; Gocke, E., Müller, L., Ballantyne, M., Whitwell, J., Müller, L., 2009c. MNT and MutaMouse studies to definde the in vivo dose-response relations of the genotoxicity of EMS and ENU. Toxicol. Lett.]. As outlined in Gocke and Wall [Gocke, E., Wall, M., 2009. In vivo genotoxicity of EMS: Statistical assessment of the dose response curves. Toxicol. Lett.], several statistical approaches are in support of a threshold model to best fit the data. The presence of clear no effect levels in bone marrow, liver and GI-tract tissue with several dose levels tested below the NOEL permits the calculation of safety factors with considerable confidence. In calculating the ratio of the NOEL dose in the animal studies (25mg/kg/day) divided by the calculated maximal daily dose of the patients (1068ppm EMS in 2.92g Viracept tablets=2.75mg EMS or 0.055mg/kg for a 50kg person) we derive a safety factor of 454 based on oral intake. Detailed absorption, distribution and metabolism studies in mice, rats and monkeys and with human surrogates in vitro enable us to estimate the safety factors also for the calculated likely highest exposure (AUC and C(max)) of patients to EMS [Lave, T., Birnböck, H., Götschi, A., Ramp, T., Pähler, A., 2009a. In vivo and in vitro characterization of ethyl methanesulfonate pharmacokinetics in animals and in human. Toxicol. Lett.; Lave, T., Paehler, A., Grimm, H.P., 2009b. Modelling of patient EMS exposure: translating pharmacokinetics of EMS in vitro and in animals into patients. Toxicol. Lett.]. We calculate the total exposure (AUC) based safety factor to amount to at least 28. This lower value is due to the conservative prediction of a longer half-life of EMS in man versus mouse, rat and monkey. Based on the estimated human C(max) the safety factor for affected Viracept patients is calculated to be 370, as C(max) is mainly dependent on volume of distribution, which is not much different for EMS in different species. We consider that the total exposure based safety factor constitutes a minimal value since the considerations regarding evidence of error-free repair at sub-threshold concentrations argues in favor of using the highest EMS concentration (C(max)) rather than the AUC as basis for risk assessment. The 'true value' very likely lies somewhere between these two numbers as aspects such as repair enzyme availability and status of the cell cycle relative to the insult are important parameters that may not fully support safety factors based solely on C(max) estimates. Potential adverse effects of EMS such as cancer, birth abnormalities and heritable effects are considered to be sequelae of its genotoxic activity. Hence, the thresholded dose-response relationships should also apply to these endpoints. We also provide a comprehensive discussion of the specific disease situation of the HIV infected target population and potential influences of co-medications on the susceptibilities and repair capacities of EMS induced DNA lesions.

Reichardt's dye and its reactions with the alkylating agents 4-chloro-1-butanol, ethyl methanesulfonate, 1-bromobutane and Fast Red B - a potentially useful reagent for the detection of genotoxic impurities in pharmaceuticals.

OBJECTIVES: Alkylating agents are potentially genotoxic impurities that may be present in drug products. These impurities occur in pharmaceuticals as by-products from the synthetic steps involved in drug production, as impurities in starting materials or from in-situ reactions that take place in the final drug product. Currently, analysis for genotoxic impurities is typically carried out using either HPLC/MS or GC/MS. These techniques require specialist expertise, have long analysis times and often use sample clean-up procedures. Reichardt's dye is well known for its solvatochromic properties. In this paper the dye's ability to undergo alkylation is reported. METHODS: The reaction between Reichardt's dye and alkylating agents such as 4-chloro-1-butanol and ethyl methanesulfonate was monitored spectrophotometrically at 618 nm in acetonitrile and 624 nm in N,N-dimethylformamide. KEY FINDINGS: Changes in absorption were observed using low levels of alkylating agent (5-10 parts per million). Alkylation of the dye with 4-chloro-1-butanol and ethyl methanesulfonate was confirmed. Reichardt's dye, and its changing UV absorption, was examined in the presence of paracetamol (10 and 100 mg/ml). Whilst the alkylation-induced changes in UV absorption were not as pronounced as with standard solutions, detection of alkylation was still possible. CONCLUSIONS: Using standard solutions and in the presence of a drug matrix, Reichardt's dye shows promise as a reagent for detection of low levels of industrially important alkylating agents.