Bilateral efforts to improve SERS detection efficiency of exosomes by Au/Na7PMo11O39 Combined with Phospholipid Epitope Imprinting.

Detection of cancer-related exosomes in body fluids has become a revolutionary strategy for early cancer diagnosis and prognosis prediction. We have developed a two-step targeting detection method, termed PS-MIPs-NELISA SERS, for rapid and highly sensitive exosomes detection. In the first step, a phospholipid polar site imprinting strategy was employed using magnetic PS-MIPs (phospholipids-molecularly imprinted polymers) to selectively isolate and enrich all exosomes from urine samples. In the second step, a nanozyme-linked immunosorbent assay (NELISA) technique was utilized. We constructed Au/Na7PMo11O39 nanoparticles (NPs) with both surface-enhanced Raman scattering (SERS) property and peroxidase catalytic activity, followed by the immobilization of CD9 antibodies on the surface of Au/Na7PMo11O39 NPs. The Au/Na7PMo11O39-CD9 antibody complexes were then used to recognize CD9 proteins on the surface of exosomes enriched by magnetic PS-MIPs. Lastly, the high sensitivity detection of exosomes was achieved indirectly via the SERS activity and peroxidase-like activity of Au/Na7PMo11O39 NPs. The quantity of exosomes in urine samples from pancreatic cancer patients obtained by the PS-MIPs-NELISA SERS technique showed a linear relationship with the SERS intensity in the range of 6.21 × 107-2.81 × 108 particles/mL, with a limit of detection (LOD) of 5.82 × 107 particles/mL. The SERS signal intensity of exosomes in urine samples from pancreatic cancer patients was higher than that of healthy volunteers. This bidirectional MIPs-NELISA-SERS approach enables noninvasive, highly sensitive, and rapid detection of cancer, facilitating the monitoring of disease progression during treatment and opening up a new avenue for rapid early cancer screening.

Nitrocellulose/acrylic resin coated screen-printed carbon electrode to construct a capacitive immunosensor for anti-BSA.

The capacitive immunosensor, known for its label-free simplicity, has great potential for point-of-care diagnostics. However, the interaction between insulation and recognition layers on the sensing electrode greatly affects its performance. This study introduces a pioneering dual-layer strategy, implementing a novel combination of acrylic resin (AR) and nitrocellulose (NC) coatings on screen-printed carbon electrodes (SPCEs). This innovative approach not only enhances the dielectric properties of the capacitive sensor but also streamlines the immobilization of recognizing elements. Particularly noteworthy is the superior reliability and insulation offered by the AR coating, surpassing the limitations of traditional self-assembled monolayer (SAM) modifications. This dual-layer methodology establishes a robust foundation for constructing capacitive sensors optimized specifically for liquid medium-based biosensing applications. The NC coating in this study represents a breakthrough in effectively immobilizing BSA, unraveling the capacitive response intricately linked to the quantity of adsorbed recognizing elements. The results underscore the prowess of the proposed immunosensor, showcasing a meticulously defined linear calibration curve for anti-BSA (ranging from 0 to 25 µg/ml). Additionally, specific interactions with anti-HAS and anti-TNF-α further validate the versatility and efficacy of the developed immunosensor. This work presents a streamlined and highly efficient protocol for developing label-free immunosensors for antibody determination and introduces a paradigm shift by utilizing readily available electrodes and sensing systems. The findings are poised to catalyze a significant acceleration in the advancement of biosensor technology, opening new avenues for innovative applications in point-of-care diagnostics.

Laser-printed paper ELISA and hydroxyapatite immobilization for colorimetric congenital anomalies screening in saliva.

BACKGROUND: Alpha-fetoprotein (AFP) is a fetal protein that can indicate congenital anomalies such as Down syndrome and spinal canal blockage when detected at abnormal levels in pregnant women. Current AFP detection methods rely on invasive blood or serum samples, which require sophisticated equipment. From the many solutions proposed, colorimetric paper-based assays excel in point-of-care settings. The concept of paper-based ELISA (p-ELISA) enhances traditional methods, aligning with the ASSURED criteria for diagnostics in resource-limited regions. Despite success in microfluidic paper-based assay devices, laser printing remains underexplored for p-ELISA. Additionally, modifying the paper surface provides an additional layer of sensitivity enhancement. RESULTS: In this study, we developed a novel laser-printed paper-based ELISA (LP-pELISA) for rapid, sensitive, and noninvasive detection of AFP in saliva samples. The LP-pELISA platform was fabricated by printing hydrophobic barriers on filter paper using a laser printer, followed by depositing hydroxyapatite (HAp) as an immobilization material for the antibodies. The colorimetric detection was achieved using AuNPs functionalized with anti-AFP antibodies and silver nitrate enhancement. The LP-pELISA exhibited a linear response for AFP detection in both buffer and saliva samples over a range of 1.0-800 ng mL-1, with a limit of detection (LOD) reaching 1.0 ng mL-1. The assay also demonstrated good selectivity, repeatability, reproducibility, and stability. The LP-pELISA was further validated by testing spiked human saliva samples, showing its potential for point-of-care diagnosis of congenital disabilities. SIGNIFICANCE: The LP-pELISA is a noninvasive platform showcasing simplicity, cost-effectiveness, and user-friendliness, utilizing laser printing, hydroxyapatite modification, and saliva samples to efficiently detect AFP. Beyond its application for AFP, this method's versatility extends to other biomarkers, positioning it as a catalyst for the evolution of paper-based biosensors. The LP-pELISA holds promise as a transformative tool for point-of-care diagnostics, fostering advancements in healthcare with its innovative technology.

Precursor carboxy-silica for functionalization with interactive ligands. IV. Carbodiimide assisted preparation of immobilized antibody stationary phases for high performance immuno-affinity chromatography of human serum.

In this Part IV of the article series dealing with the functionalization of the precursor carboxy silica with various chromatographic ligands, immuno affinity (IA) columns were prepared with immobilized anti-apolipoprotein B (AAP B) and anti-haptoglobin (AHP) antibodies for use in immuno affinity chromatography (IAC) in the aim of selectivily capturing their corresponding antigens from healthy and cancer human sera. Diseased human serum with adenocarcinoma cancer was selected as a typical diseased biological fluid. Besides preferentially capturing their corresponding antigens, the AAP B column captured from disease-free and cancer sera, 34 proteins and 33 proteins, respectively, while the AHP column enriched 38 and 47 proteins, respectively. This nonspecific binding can be attributed to the many proteins human serum have, which could mediate protein-protein interactions thus leading to the so-called "sponge effect". This kind of behavior can be exploited positively in the determination of differentially expressed proteins (DEPs) for diseased serum with respect to healthy serum and in turn allow the identification of an array of potential biomarkers for cancer. In fact, For AHP column, 13 upregulated and 22 downregulated proteins were identified whereas for AAP B column the numbers were 23 and 10, respectively. The DEPs identified with both columns match those reported in the literature for other types of cancers. The different expression of proteins in each IAC column can be related to the variability of protein-protein interactions. In addition, an array of a few biomarkers is more indicative of a certain disease than a single biomarker.

Construction of AlGaN/GaN high-electron-mobility transistor-based biosensor for ultrasensitive detection of SARS-CoV-2 spike proteins and virions.

The COVID-19 pandemic has highlighted the need for rapid and sensitive detection of SARS-CoV-2. Here, we report an ultrasensitive SARS-CoV-2 immunosensor by integration of an AlGaN/GaN high-electron-mobility transistor (HEMT) and anti-SARS-CoV-2 spike protein antibody. The AlGaN/GaN HEMT immunosensor has demonstrated the capability to detect SARS-CoV-2 spike proteins at an impressively low concentration of 10-22 M. The sensor was also applied to pseudoviruses and SARS-CoV-2 ΔN virions that display the Spike proteins with a single virion particle sensitivity. These features validate the potential of AlGaN/GaN HEMT biosensors for point of care tests targeting SARS-CoV-2. This research not only provides the first HEMT biosensing platform for ultrasensitive and label-free detection of SARS-CoV-2.

Functionalized gold nanoparticle enhanced nanorod hyperbolic metamaterial biosensor for highly sensitive detection of carcinoembryonic antigen.

Hyperbolic metamaterial (HMM) biosensors based on metals have superior performance in comparison with conventional plasmonic biosensors in the detection of low concentrations of molecules. In this study, a nanorod HMM (NHMM) biosensor based on refractive index changes for carcinoembryonic antigen (CEA) detection is developed using secondary antibody modified gold nanoparticle (AuNP-Ab2) nanocomposites as signal amplification element for the first time. Numerical analysis based on finite element method is conducted to simulate the perturbation of the electric field of bulk plasmon polariton (BPP) supported by a NHMM in the presence of a AuNP. The simulation reveals an enhancement of the localized electric field, which arises from the resonant coupling of BPP to the localized surface plasmon resonance supported by AuNPs and is beneficial for the detection of changes of the refractive index. Furthermore, the AuNP-Ab2 nanocomposites-based NHMM (AuNP/Ab2-NHMM) biosensor enables CEA detection in the visible and near-infrared regions simultaneously. The highly sensitive detection of CEA with a wide linear range of 1-500 ng/mL is achieved in the near-infrared region. The detectable concentration of the AuNP/Ab2-NHMM biosensor has a 50-fold decrease in comparison with a NHMM biosensor. A low detection limit of 0.25 ng/mL (1.25 pM) is estimated when considering a noise level of 0.05 nm as the minimum detectable wavelength shift. The proposed method achieves high sensitivity and good reproducibility for CEA detection, which makes it a novel and viable approach for biomedical research and early clinical diagnostics.

A Co-Reactive Immunosensor Based on Ti3C2Tx MXene@TiO2-MoS2 Hybrids Promoting luminol@Au@Ni-Co NCs Electrochemiluminescence for CYFRA 21-1 Detection.

The construction of assays is capable of accurately detecting cytokeratin-19 (CYFRA 21-1), which is critical for the rapid diagnosis of nonsmall cell lung cancer. In this work, a novel electrochemiluminescence (ECL) immunosensor based on the co-reaction promotion of luminol@Au@Ni-Co nanocages (NCs) as ECL probe by Ti3C2Tx MXene@TiO2-MoS2 hybrids as co-reaction accelerator was proposed to detect CYFRA 21-1. Ni-Co NCs, as a derivative of Prussian blue analogs, can be loaded with large quantities of Au NPs, luminol, and CYFRA 21-1 secondary antibodies due to their high specific surface area. To further improve the sensitivity of the developed ECL immunosensor, Ti3C2Tx MXene@TiO2-MoS2 hybrids were prepared by in situ growth of TiO2 nanosheets on highly conductive Ti3C2Tx MXene, and MoS2 was homogeneously grown on Ti3C2Tx MXene@TiO2 surfaces by the hydrothermal method. Ti3C2Tx MXene@TiO2-MoS2 hybrids possess excellent catalytic performance on the electro-redox of H2O2 generating more O2·- and obtaining optimal ECL intensity of the luminol/H2O2 system. Under the appropriate experimental conditions, the quantitative detection range of CYFRA 21-1 was from 0.1 pg mL-1 to 100 ng mL-1, and the limit of detection (LOD) was 0.046 pg mL-1. The present sensor has a lower LOD with a wider linear range, which provides a new analytical assay for the early diagnosis of small-cell-type lung cancer labels.

Surface Reaction of Electroosmotic Flow-Driven Free Antigens With Immobilized Magnetic-Microbeads-Tagged-Antibodies in Microchannels.

Immunoassays based on reactions between target pathogen (antigen; Ag) and antibody (Ab) are frequently used for Ag detection. An external magnetic field was used to immobilize magnetic microbeads-tagged-antibodies (mMB-Ab) on the surface of a microchannel in the capture zone. The mMB-Ab was subsequently used for Ag detection. The objective of this numerical study, with experimental validation, is to assess the surface reaction between mMB-Ab and Ag in the presence of electro-osmotic flow (EOF). First, immobilization of mMB-Ab complex in the wall of the capture zone was achieved. Subsequently, the Ag was transported by EOF toward the capture zone to bind with the immobilized mMB-Ab. Lastly, mMB-Ab:Ag complex was formed and immobilized in the capture zone. A finite volume solver was used to implement the above steps. The surface reaction between the mMB-Ab and Ag was investigated in the presence of electric fields (E): 150 V/cm-450 V/cm and Ag concentrations: 0.001 M-1000 M. The depletion of mMB-Ab increases with time as the E decreases. Furthermore, as the concentration of Ag decreases, the depletion of mMB-Ab increases with time. These results quantify the detection of Ag using the EOF device; thus, signifying its potential for rapid throughput screening of Ag. This platform technology can lead to the development of portable devices for the detection of target cells, pathogens, and biomolecules for testing water systems, biological fluids, and biochemicals.

Surface chemical modification of poly(dimethylsiloxane) for stabilizing antibody immobilization and T cell cultures.

Advances in cell immunotherapy underscore the need for effective methods to produce large populations of effector T cells, driving growing interest in T-cell bioprocessing and immunoengineering. Research suggests that T cells demonstrate enhanced expansion and differentiation on soft matrices in contrast to rigid ones. Nevertheless, the influence of antibody conjugation chemistry on these processes remains largely unexplored. In this study, we examined the effect of antibody conjugation chemistry on T cell activation, expansion and differentiation using a soft and biocompatible polydimethylsiloxane (PDMS) platform. We rigorously evaluated three distinct immobilization methods, beginning with the use of amino-silane (PDMS-NH2-Ab), followed by glutaraldehyde (PDMS-CHO-Ab) or succinic acid anhydride (PDMS-COOH-Ab) activation, in addition to the conventional physical adsorption (PDMS-Ab). By employing both stable amide bonds and reducible Schiff bases, antibody conjugation significantly enhanced antibody loading and density compared to physical adsorption. Furthermore, we discovered that the PDMS-COOH-Ab surface significantly promoted IL-2 secretion, CD69 expression, and T cell expansion compared to the other groups. Moreover, we observed that both PDMS-COOH-Ab and PDMS-NH2-Ab surfaces exhibited a tendency to induce the differentiation of naïve CD4+ T cells into Th1 cells, whereas the PDMS-Ab surface elicited a Th2-biased immunological response. These findings highlight the importance of antibody conjugation chemistry in the design and development of T cell culture biomaterials. They also indicate that PDMS holds promise as a material for constructing culture platforms to modulate T cell activation, proliferation, and differentiation.

Label-free electrochemical biosensor for direct detection of Oncostatin M (OSM) inflammatory bowel diseases (IBD) biomarker in human serum.

Oncostatin M (OSM) is an interleukin-6 (IL-6) member family cytokine implicated in the pathogenesis of chronic diseases including inflammatory bowel disease (IBD). OSM is a novel diagnostic biomarker over-expressed in the serum of IBD patients. This paper reports on the first electrochemical OSM immunosensor, developed using a multistep fabrication process aimed at covalently immobilizing OSM antibodies on a mixed self-assembled monolayer coated gold working electrode. Cyclic voltammetry, atomic force microscopy (AFM), IR spectroscopy and optical characterizations were used to validate the sensor functionalization protocol. Electrochemical impedance spectroscopy (EIS) measurements were performed to assess the reliability of the immunosensor preparation and to verify the antibody-antigen complexes formation. The label-free immunosensor showed high sensitivity identifying OSM at clinically relevant concentrations (37-1000 pg mL-1) with low detection limit of 2.86 pg mL-1. Both sensitivity and selectivity of the proposed immunosensor were also demonstrated in human serum in the presence of interfering biomarkers, making it an innovative potential platform for the OSM biomarker detection in IBD patients' serum.

Influence of different conjugation methods for activating antibodies on polymeric nanoparticles: Effects for polyclonal expansion of human CD8+ T cells.

Particle-based systems have become a state-of-the-art method for in vitro expanding cytotoxic T cells by tailoring their surface with activating molecules. However, commonly used methods utilize facile carbodiimide chemistry leading to uncontrolled orientation of the immobilized antibodies on the particle surface that can lead to poor binding to target cells. To address this, selective coupling strategies utilizing regioselective chemical groups such as disulfide bridges offer a simple approach. In this work we present a set of methods to investigate the effect of polymeric nanoparticles, conjugated with either regioselective- or randomly-immobilized antiCD3 and antiCD28 antibodies, on the activation potential, expansion and expression of activation markers in T cells. We show that nanoparticles with well-oriented monovalent antibodies conjugated via maleimide require fewer ligands on the surface to efficiently expand T cells compared to bivalent antibodies randomly-immobilized via carbodiimide conjugation. Analysis of the T cell expression markers reveal that the T cell phenotype can be fine-tuned by adjusting the surface density of well-oriented antibodies, while randomly immobilized antibodies showed no differences despite their ligand density. Both conjugation techniques induced cytotoxic T cells, evidenced by analyzing their Granzyme B secretion. Furthermore, antibody orientation affects the immunological synapse and T cell activation by changing the calcium influx profile upon activation. Nanoparticles with well-oriented antibodies showed lower calcium influx compared to their bivalent randomly-immobilized counterparts. These results highlight the importance of controlling the antibody density and orientation on the nanoparticle surface via controlled coupling chemistries, helping to develop improved particle-based expansion protocols to enhance T cell therapies.

Au/PANI@PtCu-based electrochemical immunosensor for ultrasensitive determination of pro-gastrin-releasing peptide.

An ultrasensitive sandwich-type electrochemical immunosensor for pro-gastrin-releasing peptide (ProGRP) detection was constructed based on PtCu nanodendrites functionalized Au/polyaniline nanospheres (Au/PANI@PtCu). The prepared Au/PANI@PtCu nanocomposites not only possessed excellent electro-catalytic activity of H2O2 reduction due to the synergistic effect between the Au/PANI and PtCu NDs but also provided large specific surface area for detection of antibodies (Ab2) immobilization. In addition, Au nanoparticles encapsulated multi-wall carbon nanotubes (AuNPs@MWCNTs) were also applied to modify the glassy carbon electrode interface for loading numerous capture antibodies (Ab1). In the presence of target ProGRP, a sandwich-type electrochemical immunosensor showed a strong current response from the electro-catalysis of Au/PANI@PtCu toward H2O2 reduction. Benefiting from the exceptional electro-catalytic performance of Au/PANI@PtCu and the high conductivity of AuNPs@MWCNTs, the sandwich-type immunoassay exhibited remarkable sensitivity in detection. The linear range extended from 100 fg/mL to 10 ng/mL, while achieving an impressively low limit of detection of 77.62 fg/mL.

Ultrasensitive and Rapid Detection of Procalcitonin via Waveguide-Enhanced Nanogold-Linked Immunosorbent Assay for Early Sepsis Diagnosis.

Sepsis, a life-threatening inflammatory response, demands economical, accurate, and rapid detection of biomarkers during the critical "golden hour" to reduce the patient mortality rate. Here, we demonstrate a cost-effective waveguide-enhanced nanogold-linked immunosorbent assay (WENLISA) based on nanoplasmonic waveguide biosensors for the rapid and sensitive detection of procalcitonin (PCT), a sepsis-related inflammatory biomarker. To enhance the limit of detection (LOD), we employed sandwich assays using immobilized capture antibodies and detection antibodies conjugated to gold nanoparticles to bind the target analyte, leading to a significant evanescent wave redistribution and strong nanoplasmonic absorption near the waveguide surface. Experimentally, we detected PCT for a wide linear response range of 0.1 pg/mL to 1 ng/mL with a record-low LOD of 48.7 fg/mL (3.74 fM) in 8 min. Furthermore, WENLISA has successfully identified PCT levels in the blood plasma of patients with sepsis and healthy individuals, offering a promising technology for early sepsis diagnosis.

A sensitive sandwich-type electrochemical immunosensor using nitrogen-doped graphene/metal-organic framework-derived CuMnCoOx and Au/MXene for the detection of breast cancer biomarker.

In terms of cancer-related deaths among women, breast cancer (BC) is the most common. Clinically, human epidermal growth receptor 2 (HER2) is one of the most commonly used diagnostic biomarkers for facilitating BC cell proliferation and malignant growth. In this study, a disposable gold electrode (DGE) modified with gold nanoparticle-decorated Ti3C2Tx (Au/MXene) was utilized as a sensing platform to immobilize the capturing antibody (Ab1/Au/MXene). Subsequently, nitrogen-doped graphene (NG) with a metal-organic framework (MOF)-derived copper-manganese-cobalt oxide, tagged as NG/CuMnCoOx, was used as a probe to label the detection antibody (Ab2). A sandwich-type immunosensor (NG/CuMnCoOx/Ab2/HER2-ECD /Ab1/Au/MXene/DGE) was developed to quantify HER2-ECD. NG/CuMnCoOx enhances the conductivity, electrocatalytic active sites, and surface area to immobilize Ab2. In addition, Au/MXene facilitates electron transport and captures more Ab1 on its surface. Under optimal conditions, the resultant immunosensor displayed an excellent linear range of 0.0001 to 50.0 ng. mL-1. The detection limit was 0.757 pg·mL-1 with excellent selectivity, appreciable reproducibility, and high stability. Moreover, the applicability for determining HER2-ECD in human serum samples indicates its ability to monitor tumor markers clinically.

Sandwich-type immunosensor based on aminated 3D-rGOF-NH2 and CMK-3-Fc-MgAl-LDH multilayer nanocomposites for detection of CA125.

Cancer antigen 125 (CA125)1 is the most important biological screening indicator used to monitor epithelial ovarian cancers, and it plays a vital role in distinguishing ovarian cancers from benign diseases. Biosensors show great potential in the analysis and detection of disease markers. In this study, we designed electrochemical sensors based on three-dimensional amino-functionalized reduced graphene oxide (3D-rGOF-NH2),2 MgAl layered double hydroxide nanocomposites containing ordered mesoporous carbon (CMK-3),3 and ferrocene carboxylic acids（Fc-COOH）4for the detection of CA125. 3D-rGOF-NH2 possesses good conductivity, a large surface area, and high porosity, enabling more immobilized nanoparticles to be deposited on its surface with excellent stability. CMK-3@Fc@MgAl-LDH nanocomposite was used as a carrier to enhance the immobilization of antibodies and the loading of Fc, conductors to enhance conductivity, and enhancers to gradually amplify the signal of Fc. The surface morphology, elemental composition, and surface groups of the materials were characterized using scanning electron microscopy (SEM),5 transmission electron microscopy (TEM),6 and X-ray diffraction (XRD)7 techniques. The response signal of the electrochemical sensor was measured by DPV. Under the optimal conditions, the electrochemical sensor obtained a linear detection range of 0.01 U/mL-100 U/mL with a detection limit of 0.00417 U/mL.

Significance of the antibody orientation for the lateral flow immunoassays: A mini-review.

Lateral flow immunoassays (LFIAs) are well-established and broadly commercialized tools in the field of point-of-care testing due to their simplicity, rapidity, cost-effectiveness, and low requirements for users and equipment. However, the insensitivity and the possibility of producing inaccurate results associated with conventional LFIAs have impeded their wide-ranging implementation, especially for monitoring ultra-trace level of analytes. Moreover, the heterogeneous distribution of amino acids on the surface of antibody (Ab) results in a lack of precise control over their orientation, which ultimately leads to unsatisfactory detection performance. To address those concerns, herein we provide an overview of the emerging efforts to prepare well-established LFIAs from the perspective of orientation manipulation of immobilized Abs on the nanoprobes or membranes. The preparation of excellent nanoprobes with Abs being oriented immobilized, consisting of the nanoprobe types, Ab types, and their conjugation chemistries, are reviewed. Followed by the introduction of efforts highlight the importance of directionally immobilized Ab on the membrane. The effects of Ab orientation on the analytical performance of LFIA platforms in terms of sensitivity, specificity, rapidity, reliability, cost-effectiveness, and stability are also summarized. Finally, the future development and challenges of Ab-oriented immobilization-assisted LFIAs are also discussed.

An integrated electrochemical immunosensor based on Pd-Ir cubic nanozyme and Ketjen black for ultrasensitive detection of circulating tumor cells.

Ultrasensitive detection of circulating tumor cells (CTCs) holds significant clinical importance in monitoring metastasis and therapeutic outcomes. In this study, we have developed a novel electrochemical sensing model based on nanomaterials for highly sensitive and specific determination of CTCs. A gold electrode co-modified with Ketjin black (KB) and Au nanoparticles (AuNPs) exhibits exceptional conductivity. By conjugating palladium-iridium cubic nanozyme (Pd-Ir CNE) with antibodies, we have created a detection probe capable of catalyzing hydrogen peroxide (H2O2), thereby amplifying the output signal and resulting in significantly enhanced current on the electrode for detecting CTCs. The constructed immunosensor has achieved a detection limit of 2 cell mL-1 for model MCF-7 cells. Furthermore, the as-constructed electrochemical immunosensor can accurately detect whole blood-spiked target CTCs, showing great promise for clinical applications in early cancer diagnosis and prognosis.

Ability of Antibodies Immobilized on Gold Nanoparticles to Bind Small Antigen Fluorescein.

The analytical applications of antibodies are often associated with their immobilization on different carriers, which is accompanied by a loss of antigen-binding activity for a sufficient proportion of the bound antibodies. In contrast to data on plain carriers, minimal data are available on the properties of antibodies on the surfaces of nanoparticles. Protein antigens have been predominantly investigated, for which space restrictions do not allow them to occupy all active sites of immobilized antibodies. This study considered a low-molecular-weight compound, fluorescein, as an antigen. Spherical gold nanoparticles with five different sizes, two differently charged forms of fluorescein, and three different levels of surface coverage by immobilized antibodies were tested. For gold nanoparticles with diameters from 14 to 35.5 nm with monolayers of immobilized antibodies, the percentage of molecules capable of binding carboxyfluorescein varied from 6% to 17%. The binding of aminofluorescein was more efficient; for gold nanoparticles with an average diameter of 21 nm, the percentage of active binding sites for the immobilized antibodies reached 27% compared with 13% for the carboxyfluorescein case. A fourfold reduction in the coverage of the nanoparticles' surface compared with that of the monolayer did not lead to reliable changes in the percentage of active binding sites. The obtained data demonstrate that an antigen's binding to immobilized antibodies is limited even for small antigens and depends on the size of the nanoparticles and the electrostatic repulsion near their surface.

A liquid crystal-based biosensor for sensitive detection of tumor necrosis factor-alpha.

Tumor necrosis factor-alpha (TNF-α) is a cytokine secreted by the macrophages and Th1 cells of the immune system in response to inflammation. Given its significance as a biomarker with elevated levels in physiological fluids in various conditions, there is an increasing demand for a simple and accurate TNF-α detection strategy. In this article, we present a liquid crystal (LC)-based biosensor developed for sensitive TNF-α detection. The biosensor operates as follows: TNF-α and detection antibodies (DAbs) form complexes during preincubation. These complexes then bind with the surface-immobilized capture antibodies (CAbs), facilitating the antigen-antibody reaction between the CAbs and the TNF-α/DAb complexes. This target recognition interaction alters the surface topography, disrupting the vertical orientation of LCs produced by dimethyloctadecyl[3-(trimethoxysilyl)-propyl]ammonium chloride. The orientational change in the LCs can be easily visualized with a polarized optical microscope, resulting in brighter images as TNF-α levels rise. Our results demonstrated a linear range of 5.00-500 pg/mL, with a limit of detection and limit of quantification being 1.08 and 3.56 pg/mL, respectively. Recovery experiments on diluted saliva samples produced reasonable results, with TNF-α recoveries ranging from 97.1% ± 2.58% to 107% ± 5.95%.

Extending the Shelf-Life of Immunoassay-Based Microfluidic Chips through Freeze-Drying Sublimation Techniques.

Point-of-care testing (POCT) platforms utilizing immunoassay-based microfluidic chips offer a robust and specific method for detecting target antibodies, demonstrating a wide range of applications in various medical and research settings. Despite their versatility and specificity, the adoption of these immunoassay chips in POCT has been limited by their short shelf-life in liquid environments, attributed to the degradation of immobilized antibodies. This technical limitation presents a barrier, particularly for resource-limited settings where long-term storage and functionality are critical. To address this challenge, we introduce a novel freeze-dry sublimation process aimed at extending the shelf-life of these microfluidic chips without compromising their functional integrity. This study elaborates on the mechanisms by which freeze-drying preserves the bioactivity of the immobilized antibodies, thereby maintaining the chip's performance over an extended period. Our findings reveal significant shelf-life extension, making it possible for these POCT platforms to be more widely adopted and practically applied, especially in settings with limited resources. This research paves the way for more accessible, long-lasting, and effective POCT solutions, breaking down previous barriers to adoption and application.