Pantheon habitat made from regolith, with a focusing solar reflector.

We describe a polar Moon base habitat using direct solar energy for construction, food production and atmospheric revitalization. With a growing area as large as 2000 m2, it could provide for 40 or more people. The habitat is built like the ancient Roman Pantheon, a stone structure with a top circular oculus, bringing in focused sunlight that is spread out to crops below. The conical, corbelled structure is built from cast regolith blocks, held in compression despite the large internal atmospheric pressure by a regolith overlayer 20-30 m thick. It is sealed on the inside against leaks with thin plastic. A solar mirror concentrator used initially to cast the building blocks is later used to illuminate the habitat through a small pressure window at the oculus. Three years of robotic preparation of the building blocks does not seem excessive for a habitat which can be expected to last for millennia, as has the Treasury of Atreus made by similar dry-stone construction. One goal of returning to the Moon is to demonstrate the practicality of long-term human habitation off the Earth. The off-axis, paraboloidal reflecting mirror is rotated about the vertical polar axis in order to direct horizontal sunlight downward to a focus. In this way, the heavy materials needed from Earth to build and power the habitat are largely limited to the solar concentrator and regolith moving and moulding equipment. By illuminating with a reflector rather than with electricity, the solar collection area is 20 times smaller than would be needed for PV cells. This article is part of a discussion meeting issue 'Astronomy from the Moon: the next decades'.

In-Use Photostability Practice and Regulatory Evaluation for Pharmaceutical Products in an Age of Light-Emitting Diode Light Sources.

This article describes how the increased use of energy-efficient solid-state light sources (e.g., light-emitting diode [LED]-based illumination) in hospitals, pharmacies, and at home can help alleviate concerns of photodegradation for pharmaceuticals. LED light sources, unlike fluorescent ones, do not have spurious spectral contributions <400 nm. Because photostability is primarily evaluated in the International Council of Harmonization Q1B tests with older fluorescent bulb standards (International Organization for Standardization 10977), the amount of photodegradation observed can over-predict what happens in reality, as products are increasingly being stored and used in environments fitted with LED bulbs. Because photodegradation is premised on light absorption by a compound of interest (or a photosensitizer), one can use the overlap between the spectral distribution of a light source and the absorption spectra of a given compound to estimate if photodegradation is a possibility. Based on the absorption spectra of a sample of 150 pharmaceutical compounds in development, only 15% would meet the required overlap to be a candidate to undergo direct photodegradation in the presence of LED lights, against a baseline of 55% of compounds that would, when considering regular fluorescent lights. Biological drug products such as peptides and monoclonal antibodies are also expected to benefit from the use of more efficient solid-state lighting.

Eurasian Tunnel Project: the first saturation dives during compressed-air work in Turkey.

The Eurasian Tunnel is a 5.64-km crossroad tunnel that connects Europe and Asia. Located under the seabed for the first time, 3.34 km of the tunnel that crosses the Bosphorus was built by advanced tunneling techniques. An exclusively designed tunnel boring machine (TBM), which has an operating pressure of 11 bars and a diameter of 13.7 meters was used for boring the seabed tunnel. The deepest point was 106 meters below sea level. One bounce diving period and seven saturation diving periods were needed for the repair and maintenance of the TBM during the project. Total time spent under pressure was 5,763 hours. A saturation decompression chamber for four divers was used for the saturation interventions, and divers breathed trimix at storage and excursion depths. The longest saturation run was the second, with storage at 10 bars and excursions to 10.4 bars. Twenty-three professional divers who were all experienced in compressed-air work were assigned to work on the project. Four dive physicians provided medical support, which included screening of divers before and during the hyperbaric interventions as well as on-site supervision. There were no diving-related accidents. A minor hand trauma, an external otitis and occasional insomnia were non-diving-related health issues that occurred during saturation and bounce diving. To our knowledge, the Eurasian Tunnel was the first project to perform TBM repair operations at such depths under the seabed and the first saturation diving in Turkey. In this report, we aimed to share our experiences of hyperbaric medical consulting in support of this type of tunneling project.

Response of green roof performance to multiple hydrologic and design variables: a laboratory investigation.

Multiple factors affect green roof performance and their effects might vary at different stages of operation. This paper aimed to link green roof performance to hydrologic variables (antecedent moisture condition (AMC) and rainfall intensity) and design variables (growing medium (GM) type and depth) under multiple dimensions at the early stage of operation using laboratory experiment data. The results showed that the AMC is the most influential factor of hydrologic performance, whereas the GM type appeared to primarily affect the nutrient levels of the outflow. The significant main effects of other variables and interaction effects between two variables point to challenges in green roof design.

The influence of a green roof drainage layer on retention capacity and leakage quality.

The aim of the research was to determine the influence of the substrate and different drainage materials on retention capacity and runoff water quality from three green roof containers. Phosphates were chosen as the water quality indicator based on their potential adverse impact on water quality in urban rainwater collectors. The field experiment was conducted at the Warsaw University of Life Sciences Water Center meteorological station in years 2013-2015. In terms of precipitation, the monitoring period covered a wet (+147.1 mm), average (+42.7 mm) and dry (- 66.3 mm) year. Leakage from the containers was recorded when the substrate moisture exceeded 20% and precipitation exceeded 3.5 mm/d for washed gravel, or 5.0 mm/d for a polypropylene mat and expanded clay. Phosphates were observed in leachates from all containers, with higher values observed in the second year of monitoring. As the result of this study, it can be concluded that the polypropylene mat and aggregates create different conditions for the formation of the leachate, in both volumes and its chemistry. The drainage layer made from a polypropylene mat is the most effective in terms of rainwater retention capacity and the resulting leachate quality.

Investigation of the sound generation mechanisms for in-duct orifice plates.

Sound generation due to an orifice plate in a hard-walled flow duct which is commonly used in air distribution systems (ADS) and flow meters is investigated. The aim is to provide an understanding of this noise generation mechanism based on measurements of the source pressure distribution over the orifice plate. A simple model based on Curle's acoustic analogy is described that relates the broadband in-duct sound field to the surface pressure cross spectrum on both sides of the orifice plate. This work describes careful measurements of the surface pressure cross spectrum over the orifice plate from which the surface pressure distribution and correlation length is deduced. This information is then used to predict the radiated in-duct sound field. Agreement within 3 dB between the predicted and directly measured sound fields is obtained, providing direct confirmation that the surface pressure fluctuations acting over the orifice plates are the main noise sources. Based on the developed model, the contributions to the sound field from different radial locations of the orifice plate are calculated. The surface pressure is shown to follow a U3.9 velocity scaling law and the area over which the surface sources are correlated follows a U1.8 velocity scaling law.

Monte Carlo simulations of ceiling scatter in nuclear medicine: 99m Tc, 131 I and 18 F.

PURPOSE: In the design of nuclear medicine treatment and examination rooms, an important consideration is the shielding required for ionizing radiation from the radioactive isotopes used. The shielding in the walls is normally limited to a height lower than the actual ceiling height. The direct radiation, possibly with build-up correction, can be calculated relatively easily. However, little data are available to estimate the dose contribution from ionizing radiation traveling over the wall shielding and scattering off the ceiling. We aim to determine the contribution of the ceiling scatter to the radiation dose outside nuclear medicine rooms. METHODS: Monte Carlo simulations were performed using Gate for different heights of lead shielding in the wall, and different ceiling heights. A point source in air of 99m Tc (141 keV), 131 I (365 keV) or 18 F (511 keV) was placed 1.0 m above the floor, 3.0 m from the lead shielding. Simulations of ceiling scatter only and for the total radiation dose were performed for these 3 isotopes, 5 different ceiling heights and 4-8 different wall shielding heights, resulting in a total of 165 simulations. This allowed us to compare the contribution of the radiation passing through the shielding and the ceiling scatter. RESULTS: We find that the shielding required for the primary radiation, measured in half-value layers, is an important factor in determining the relative contribution of ceiling scatter. When more than about 4 half-value layers of shielding are used, ceiling scatter becomes the dominant factor and should be taken into account in the shielding design. In many practical cases for low energy photons (e.g. from 99m Tc; 141 keV; half-value layer of 0.26 mm lead), 2 mm of lead is used and ceiling scatter is a dominating factor contributing >~70% of the dose outside the shielded room. For higher energies (e.g. 18 F; 511 keV; half-value layer of 3.9 mm lead) the ceiling scatter is typically less than about 15% when 8 mm of lead shielding is used. CONCLUSIONS: We have performed simulations that allow an estimation of the contribution of ceiling scatter to the radiation dose outside a room, based on the ceiling height, shielding height, and isotope used. This will allow for improved shielding designs in nuclear medicine departments.

Shielding Design for Adjacent, Underground Buildings of a Megavoltage Radiotherapy Facility.

In a radiotherapy facility, safety in areas next to the treatment room can be of concern when irradiating downward due to oblique x-ray transmission through the floor and/or walls, especially in areas immediately adjacent or underground. Even when there is no basement underneath, a usual conservative solution is to build a thick concrete slab as the base for the treatment room. Of course, this implies deeper soil excavation and higher associated costs. As a convenient alternative, the limiting walls can be buried a certain depth below floor level to shield oblique, downward irradiation. Besides, for space considerations, laminated barriers are usually employed, and some additional shielding to the floor may be required (L-shaped barriers). In this work, the author introduces an analytical method for calculating the required wall penetration below floor level or, alternatively, the additional floor shielding for L-shaped barriers, taking into account in either case the attenuation properties of the earth underneath the vault. Interestingly, the required penetration depth for a given wall barrier (primary or secondary), relative to a reference thickness, is only a function of basic attenuation data. Likewise, for a laminated, lead-concrete barrier, the required dimensions depend on the relative amount of lead used for the wall and on the corresponding attenuation data. The shielding design criteria developed in this work to protect underground nearby sites is conservative in nature, yet it yields optimal shield dimensions for wall footing and for wall-floor shielding, avoiding the need to construct oversized concrete slab floors.

Radiation safety aspects of the operation of first three synchrotron beam lines of Indus-2.

Five synchrotron radiation beam lines are commissioned and now under regular operation at the Synchrotron Radiation Source, Indus-2 at Raja Ramanna Centre For Advanced Technology (RRCAT), Indore, India. Nine beam lines are under trial operation, and six beam lines are in the installation stage. In the early phase of installation of beam lines on Indus-2, three bending magnet beam lines, Extended X-ray Absorption Fine Structure (EXAFS, BL-8), Energy Dispersive X-ray Diffraction (EDXRD, BL-11) and Angle Dispersive X-ray Diffraction (ADXRD, BL-12), were installed and commissioned, after approval from Atomic Energy Regulatory Board (AERB), India. These beam lines are pink (BL-8), white (BL-11) and monochromatic (BL-12), which are housed in specially designed shielded hutches. In order to ensure safety of users and other working personnel from ionizing radiations present in these beam lines, several safety systems are incorporated and safety procedures are followed. The paper describes the radiological safety aspects of the three beam lines during its initial commissioning trials and also the measurements on radiation levels carried out in and around the beam line hutches.

Occupational therapists' views on using a virtual reality interior design application within the pre-discharge home visit process.

BACKGROUND: A key role of Occupational Therapists (OTs) is to carry out pre-discharge home visits (PHV) and propose appropriate adaptations to the home environment in order to enable patients to function independently after hospital discharge. However, research shows that more than 50% of specialist equipment installed as part of home adaptations is not used by patients. A key reason for this is that decisions about home adaptations are often made without adequate collaboration and consultation with the patient. Consequently, there is an urgent need to seek out new and innovative uses of technology to facilitate patient/practitioner collaboration, engagement, and shared decision making in the PHV process. Virtual reality interior design applications (VRIDAs) primarily allow users to simulate the home environment and visualize changes prior to implementing them. Customized VRIDAs, which also model specialist occupational therapy equipment, could become a valuable tool to facilitate improved patient/practitioner collaboration, if developed effectively and integrated into the PHV process. OBJECTIVE: The intent of the study was to explore the perceptions of OTs with regard to using VRIDAs as an assistive tool within the PHV process. METHODS: Task-oriented interactive usability sessions, utilizing the think-aloud protocol and subsequent semi-structured interviews were carried out with seven OTs who possessed significant experience across a range of clinical settings. Template analysis was carried out on the think-aloud and interview data. Analysis was both inductive and driven by theory, centering around the parameters that impact upon the acceptance, adoption, and use of this technology in practice as indicated by the Technology Acceptance Model (TAM). RESULTS: OTs' perceptions were identified relating to three core themes: (1) perceived usefulness (PU), (2) perceived ease of use (PEoU), and (3) actual use (AU). Regarding PU, OTs believed VRIDAs had promising potential to increase understanding, enrich communication and patient involvement, and improve patient/practitioner shared understanding. However, it was unlikely that VRIDAs would be suitable for use with cognitively impaired patients. For PEoU, all OTs were able to use the software and complete the tasks successfully; however, participants noted numerous specialist equipment items that could be added to the furniture library. AU perceptions were positive regarding use of the application across a range of clinical settings including children/young adults, long-term conditions, neurology, older adults, and social services. However, some "fine tuning" may be necessary if the application is to be optimally used in practice. CONCLUSIONS: Participants perceived the use of VRIDAs in practice would enhance levels of patient/practitioner collaboration and provide a much needed mechanism via which patients are empowered to become more equal partners in decisions made about their care. Further research is needed to explore patient perceptions of VRIDAs, to make necessary customizations accordingly, and to explore deployment of the application in a collaborative patient/practitioner-based context.

Project for the development of the linac based NCT facility in University of Tsukuba.

A project team headed by University of Tsukuba launched the development of a new accelerator based BNCT facility. In the project, we have adopted Radio-Frequency Quadrupole (RFQ)+Drift Tube Linac (DTL) type linac as proton accelerators. Proton energy generated from the linac was set to 8MeV and average current was 10mA. The linac tube has been constructed by Mitsubishi Heavy Industry Co. For neutron generator device, beryllium is selected as neutron target material; high intensity neutrons are generated by the reaction with beryllium and the 80kW proton beam. Our team chose beryllium as the neutron target material. At present beryllium target system is being designed with Monte-Carlo estimations and heat analysis with ANSYS. The neutron generator consists of moderator, collimator and shielding. It is being designed together with the beryllium target system. We also acquired a building in Tokai village; the building has been renovated for use as BNCT treatment facility. It is noteworthy that the linac tube had been installed in the facility in September 2012. In BNCT procedure, several medical devices are required for BNCT treatment such as treatment planning system, patient positioning device and radiation monitors. Thus these are being developed together with the linac based neutron source. For treatment planning system, we are now developing a new multi-modal Monte-Carlo treatment planning system based on JCDS. The system allows us to perform dose estimation for BNCT as well as particle radiotherapy and X-ray therapy. And the patient positioning device can navigate a patient to irradiation position quickly and properly. Furthermore the device is able to monitor movement of the patient׳s position during irradiation.

Computational study of room scattering influence in the THOR BNCT treatment room.

BNCT dosimetry has often employed heavy Monte Carlo calculations for the beam characterization and the dose determination. However, these calculations commonly ignored the scattering influence between the radiations and the room structure materials in order to facilitate the calculation speed. The aim of this article attempts to explore how the room scattering affects the physical quantities such as the capture reaction rate and the gamma-ray dose rate under in-phantom and free-air conditions in the THOR BNCT treatment room. The geometry and structure materials of the treatment room were simulated in detail. The capture reaction rates per atom, as well as the gamma-ray dose rate were calculated in various sizes of phantoms and in the free-air condition. Results of this study showed that the room scattering has significant influence on the physical quantities, whether in small phantoms or in the free-air condition. This paper may be of importance in explaining the discrepancies between measurements and calculations in the BNCT dosimetry using small phantoms, in addition to provide a useful consideration with a better understanding of how the room scattering influence acts in a BNCT facility.

Communication spaces.

BACKGROUND AND OBJECTIVE: Annotations to physical workspaces such as signs and notes are ubiquitous. When densely annotated, work areas become communication spaces. This study aims to characterize the types and purpose of such annotations. METHODS: A qualitative observational study was undertaken in two wards and the radiology department of a 440-bed metropolitan teaching hospital. Images were purposefully sampled; 39 were analyzed after excluding inferior images. RESULTS: Annotation functions included signaling identity, location, capability, status, availability, and operation. They encoded data, rules or procedural descriptions. Most aggregated into groups that either created a workflow by referencing each other, supported a common workflow without reference to each other, or were heterogeneous, referring to many workflows. Higher-level assemblies of such groupings were also observed. DISCUSSION: Annotations make visible the gap between work done and the capability of a space to support work. Annotations are repairs of an environment, improving fitness for purpose, fixing inadequacy in design, or meeting emergent needs. Annotations thus record the missing information needed to undertake tasks, typically added post-implemented. Measuring annotation levels post-implementation could help assess the fit of technology to task. Physical and digital spaces could meet broader user needs by formally supporting user customization, 'programming through annotation'. Augmented reality systems could also directly support annotation, addressing existing information gaps, and enhancing work with context sensitive annotation. CONCLUSIONS: Communication spaces offer a model of how work unfolds. Annotations make visible local adaptation that makes technology fit for purpose post-implementation and suggest an important role for annotatable information systems and digital augmentation of the physical environment.

Influence of "omnidirectional" loudspeaker directivity on measured room impulse responses.

Measured room impulse responses (RIR) strongly depend on the directivity of the sound source used for the measurement. An analysis method is presented that is capable of pinpointing the influence of the loudspeaker's directivity on a set of RIRs. Taking into account the rotational symmetries of a dodecahedron loudspeaker, it detects the effects that the changing directional pattern induces in the RIR. The analysis of RIRs measured in completely different acoustical environments reveals that the influence of the loudspeaker's directivity can still be observed in the very late part of the RIR-even in very reverberant rooms. These results are presented and the consistency with general room acoustical theory is revised and discussed.

Enhancing sound absorption and transmission through flexible multi-layer micro-perforated structures.

Theoretical and experimental results are presented into the sound absorption and transmission properties of multi-layer structures made up of thin micro-perforated panels (ML-MPPs). The objective is to improve both the absorption and insulation performances of ML-MPPs through impedance boundary optimization. A fully coupled modal formulation is introduced that predicts the effect of the structural resonances onto the normal incidence absorption coefficient and transmission loss of ML-MPPs. This model is assessed against standing wave tube measurements and simulations based on impedance translation method for two double-layer MPP configurations of relevance in building acoustics and aeronautics. Optimal impedance relationships are proposed that ensure simultaneous maximization of both the absorption and the transmission loss under normal incidence. Exhaustive optimization of the double-layer MPPs is performed to assess the absorption and/or transmission performances with respect to the impedance criterion. It is investigated how the panel volumetric resonances modify the excess dissipation that can be achieved from non-modal optimization of ML-MPPs.

On the suitability of ISO 16717-1 reference spectra for rating airborne sound insulation.

A standard proposal for rating airborne sound insulation in buildings [ISO 16717-1 (2012)] defines the reference noise spectra. Since their shapes influence the calculated values of single-number descriptors, reference spectra should approximate well typical noise spectra in buildings. There is, however, very little data in the existing literature on a typical noise spectrum in dwellings. A spectral analysis of common noise sources in dwellings is presented in this paper, as a result of an extensive monitoring of various noisy household activities. Apart from music with strong bass content, the proposed "living" reference spectrum overestimates noise levels at low frequencies.

Modal density and modal distribution of bending wave vibration fields in ribbed plates.

Plates reinforced by ribs or joists are common elements in lightweight building structures, as well as in other engineering structures such as vehicles, ships, and aircraft. These structures, however, are often not well suited for simple structural acoustic prediction models such as statistical energy analysis. One reason is that the modal density is not uniformly distributed due to the spatial periodicity introduced by the ribs. This phenomenon is investigated in the present paper, using a modal model of a ribbed plate. The modal model uses the Fourier sine modes, and the coupling between the plate and ribs is incorporated using Hamilton's principle. This model is then used to investigate the modal density of the considered spatially periodic structure, and a grouping of the modes in different dominating directions is proposed. Suggestions are also given regarding how to proceed towards a simplified prediction model for ribbed plates.

Effect of temporal decay on perception of heavy-weight floor impact sounds.

This study investigates the effect of temporal decay on perception of heavy-weight floor impact sounds through auditory experiments. Heavy-weight impact sounds were recorded in apartment buildings with a box-framed type reinforced concrete structure using a rubber ball. Temporal decay was quantified by using the decay rate (DR), defined as the sound pressure level (SPL) decrease per second [dB/s], and the distribution of DR for heavy-weight impact sounds was calculated. An auditory experiment was conducted in order to examine the just noticeable difference (JND) of DR, which was determined by the criteria of 75% correct answers by subjects. It was found that the JND of DR is around 11 dB/s. Based on the distribution and JND of DR, another experiment was conducted to investigate the effect of DR on annoyance perception of heavy-weight floor impact sounds in relation to the level differences. The results indicate that SPL and DR significantly influence annoyance perception; the scale value of annoyance increases with decreasing DR and increasing SPL. It was also found that the degree of satisfaction with regards to impact sounds can be improved by increasing DR, by controlling the sound field of the receiving room.

Echo thresholds for reflections from acoustically diffusive architectural surfaces.

When sound reflects from an irregular architectural surface, it spreads spatially and temporally. Extensive research has been devoted to prediction and measurement of diffusion, but less has focused on its perceptual effects. This paper examines the effect of temporal diffusion on echo threshold. There are several notable differences between the waveform of a reflection identical to the direct sound and one from an architectural surface. The onset and offset are damped and the energy is spread in time; hence, the reflection response has a lower peak amplitude, and is decorrelated from the direct sound. The perceptual consequences of these differences are previously undocumented. Echo threshold tests are conducted with speech and music signals, using direct sound and a simulated reflection that is either identical to the direct sound or has various degrees of diffusion. Results indicate that for a speech signal, diffuse reflections are less easily detectable as a separate auditory event than specular reflections of the same total energy. For a music signal, no differences are observed between the echo thresholds for reflections with and without temporal diffusion. Additionally, echo thresholds are found to be shorter for speech than for music, and shorter for spatialized than for diotic presentation of signals.