Treatment of Fourth and Fifth Carpometacarpal Fracture-Dislocations in Punching Injuries With Motion-Sparing Hamate Fixation Spring Plates: "Rabbit Ears" Plating.

Punching injuries to the hand are frequent and can result in fourth and fifth carpometacarpal (CMC) fracture-dislocations. Fourth and fifth CMC fracture-dislocations are unstable, and dorsal metacarpal dislocations are most common. Operative management for maintaining reduction of the unstable fracture-dislocation was closed reduction and percutaneous pinning; however, in delayed fractures, open reduction is necessary. We report on a plating technique used for acute and delayed, unstable fourth and/or fifth CMC fracture-dislocations. This method of plating is novel and allows for physiological motion at the CMC joint through a dorsal buttressing mechanism while maintaining joint reduction. The range of motion begins within the first week postoperatively, and full composite fist formation and digital extension occur 4 to 6 weeks postoperatively. This novel technique affords an alternative effective surgical treatment option with excellent outcomes for patients presenting with fourth and fifth CMC fracture-dislocations up to 12 weeks following the injury.

Carpometacarpal Joint Dislocations as a Rare Cause of Hand Pain.

Carpometacarpal joint dislocations represent not more than 1% of all hand injuries due to stable joint structures and high-energy trauma mechanism. Unfortunately, there are many missed cases suffering from ongoing pain and loss of function because of difficulty in diagnosis. Here we present a case of a healthy 42-year male who presented to the emergency department with hand pain after a punch injury. On physical examination, painful swelling at the dorsal side of his right hand was noted. His radiographic images showed dorsal dislocation of fourth and fifth carpometacarpal joints, and the dislocations were reduced to the anatomical position by the emergency physician without any complication. In the case of carpometacarpal joint fracture or dislocations, early diagnosis and reduction are the most critical steps to avoid severe morbidity, and it is only possible with careful evaluation of physical and radiological findings. In conclusion, as seen in our case, emergency physicians should remain vigilant in the diagnosis and treatment of rare traumatic injuries. Key Words: Carpometacarpal joints, Dislocation, Hand injury, Pain.

Management of Acute and Chronic Thumb CMC Joint Dislocations.

Isolated dislocations of thumb CMC joints are rare injuries with serious functional implications. Patients suffering these injuries will have decreased pinch and grip strength. A high-energy, axially directed force on a flexed thumb typically causes dislocation. Chronically dislocated thumb CMC joints may be due to untreated remote trauma, hypermobility, or connective tissue disorders. Roberts and CMC stress view radiographs help identify joint dislocations. Treatment of these injuries includes closed reduction and immobilization, percutaneous pinning, open reduction with direct repair, and ligament reconstruction. Timely identification, timely treatment, and proper hand therapy often lead to adequate joint stability with minimal residual pain.

Complete Occlusion of Radial and Ulnar Arteries Following Hand Crush Injury with Multiple Carpometacarpal Joint Fracture-Dislocations.

Multiple dorsal fracture-dislocations of the carpometacarpal joints (CMCJ) occur from very high-energy trauma and are often associated with soft tissue injury or ischaemia. We report a 54-year-old male manual worker and a smoker who presented to the emergency room with history of compression of his right hand in a press machine. Radiographs showed dorsal fracture-dislocations of the scapho-trapezio-trapezoidal and third to fifth CMCJ's. Despite emergent Guyon canal and carpal tunnel release and closed reduction and pinning, skin pallor persisted in all digits. Brachial angiography revealed total occlusion of the radial and ulnar arteries and loss of the palmar arch at the level of the fracture. Heparin and Alprostadil were injected directly. On follow-up angiography three weeks later, the vessels were still occluded and collaterals provided digital circulation. Although digital sensations recovered, cold intolerance and stiffness resulted in a poor functional outcome. Level of Evidence: Level V (Therapeutic).

Volar Dislocation of Trapezoid with Coronal Fracture - A Case Report and Review of Literature.

Volar dislocation of the trapezoid is a rare injury and is easily missed. It is more common to have a dorsal dislocation of trapezoid or multiple carpometacarpal joint dislocations. The rare nature of the injury also means that there is little guidance in literature regarding optimal treatment. We are reporting the presentation, management and a 3-year follow-up of this rare injury in a 19-year-old male. Level of Evidence: Level V (Therapeutic).

Surgical Management of Ulnar Metacarpal Base Fracture-Dislocations: A Systematic Review.

BACKGROUND: Ulnar metacarpal base fractures can destabilize the carpometacarpal (CMC) joint, prompting surgical stabilization. Studies investigating this injury are limited by small case volumes. Our purpose is to review the surgical techniques, outcomes, and complications of ulnar CMC joint stabilization. METHODS: A literature search was performed of all articles published on the surgical treatment and outcomes of ulnar CMC fracture dislocations using PubMed and Google Scholar databases between the years 2014 and 2019. Data were pooled and analyzed, assessing surgical techniques and hand outcome measures: union, recurrent dislocations, range of motion, grip strength, and complications. RESULTS: Six studies met inclusion criteria. All surgical patients, regardless of technique, went on to union with no incidents of recurrent instability. Grip strength was significantly decreased postoperatively (82.7% of uninjured side). Patients with CMC dislocations of both the fourth and fifth ray had similar postoperative outcomes to those with CMC dislocations of the fifth ray alone. One third of plate and screw constructs required plate removal, due to breakage (2) or implant-related pain (4). Plate-related symptoms resolved after removal in all cases. Delayed treatment decreased the effectiveness of nonoperative treatment, and increased the likelihood of postoperative pain, chronic deformity, malunion, and CMC osteoarthritis. CONCLUSIONS: Closed reduction percutaneous pinning, open reduction percutaneous pinning, and open reduction internal fixation with CMC joint bridging or dorsal buttress plating are all well described, safe techniques with low complication rates. Early, accurate diagnosis of fourth and fifth CMC joint fracture-dislocations is crucial for optimizing hand function and postoperative outcomes.

The Measurement of the Inclination Angle of the Hamate and Analysis of the Inclination Angle for the Rotation Deformity of the Little Finger in the Fixation of the Carpometacarpal Joint.

OBJECTIVE: Complex base fractures of the fifth metacarpal bone and dislocation of the fifth carpometacarpal joint are more prone to internal rotation deformity of the little finger sequence after fixation with a transarticular plate. In the past, we have neglected that there is actually a certain angle of external rotation in the hamate surface of transarticular fixation. This study measured the inclination angle of the hamate surface relative to the fifth metacarpal surface for clinical reference. METHODS: In a prospective single-center study, we investigated the tilt angle of 60 normal hamates. The study included thin-layer computed tomography (CT) data from 60 patients from the orthopaedic clinic and inpatient unit from January 2017 to March 2020, including 34 men and 26 women who were 15~59 years old, average 35 years old. The CT data of 60 cases in Dicom format of the hand was input into Mimics and 3-Matics software for three-dimensional (3D) reconstruction and measuring the angle α between hamate surface and the fifth metacarpal surface. According to the possible placement of the transarticular plate on the fifth metacarpal surface, we measured the angle ß between the hamate surface 1 and the fifth metacarpal surface and the angle γ between the hamate surface 2 and the fifth metacarpal surface. RESULTS: The average angle between the hamate surface and the fifth metacarpal surface was 11.66°. The hamate surfaces 1 and 2 have an external rotation angle of 7.30° and 7.51° on average with respect to the fifth metacarpal surface, respectively. There is no statistically significant difference in the angles between the two groups (P > 0.05). CONCLUSIONS: The horizontal angle of the dorsal side of the hamate is different from the back of the fifth metacarpal surface, and the hamate has a certain external rotation angle with respect to the fifth metacarpal surface. No matter how the transarticular plate is placed, the plate always has a certain external rotation angle relative to the fifth metacarpal surface. When the fixation is across the fifth carpometacarpal joint, if the plate does not twist and shape, it will inevitably cause internal rotation of the fifth metacarpal, resulting in internal rotation deformity of the little finger sequence.

Complex, Multidirectional Carpometacarpal Dislocations: A Case Report.

CASE: We present a rare combined convergent-divergent carpometacarpal (CMC) fracture dislocation with median nerve involvement in a young adult after a motorbike accident. Radiographs revealed a volar dislocation of the second and fifth metacarpals and dorsal dislocation of the third and fourth metacarpals with bases of the second and fifth metacarpals found to be converging in the coronal plane. Open reduction and fixation was performed with carpal tunnel release. CONCLUSION: Combined convergent-divergent CMC fracture dislocation should be kept as a differential while evaluating CMC dislocations. Metacarpal cascade line (posteroanterior view) and 2 lateral views (radial side up and ulnar side up) with computed tomography scan (3-dimensional reconstruction) prove to be vital in such high-energy trauma.

Coronal Hamate Fractures with Carpometacarpal Dislocation Treated Effectively Using Headless Compression Screws with Percutaneous Pinning Fixation by Using the 2-Directional Approach: A Report of 2 Cases.

CASE: Coronal shear fractures of the hamate are relatively rare injuries. Surgical intervention is recommended for displaced fractures. However, there is no established surgical procedure for the displaced coronal shear fractures of the hamate. Therefore, we present 2 cases of the displaced coronal hamate fracture with metacarpal dislocations, which were successfully managed with open reduction and internal fixation, using the headless compression screw by the 2-directional approach. CONCLUSION: Our procedure ensured that the screw's distal end captured the hamate hook, and the displaced bone fragments were reduced considerably in both cases.

Palmar Dislocations of the 5th Carpometacarpal Joint: Case Report of a Rare Injury and Review of Published Cases.

Isolated palmar dislocation of the 5th carpometacarpal joint (CMCJ) is a rare injury that can be easily missed and requires a high index of suspicion to detect. We report a case of an initially missed isolated ulnopalmar dislocation of the 5th CMCJ and a summary of other published case reports comparing methods of fixation and outcomes. We conclude that a delay in diagnosis will significantly reduce the chances of successfully managing this injury via closed reduction.

Luxación carpometacarpiana múltiple / Multiple carpometacarpal dislocation

Presentamos el caso de un paciente varón de 37 años que llegó al servicio de urgencias a raíz de traumatismo de alta energía (caída en bicicleta). Previa valoración inicial y una vez descartadas lesiones vitales. se objetiva dolor y deformidad en muñeca derecha, por lo que se realiza radiografía simple que demuestra una luxación carpometacarpiana de los cinco radios de la mano. Se procede a la reducción quirúrgica bajo anestesia y fijación interna, restableciendo la relación anatómica normal. La luxación carpometacarpiana es una lesión poco frecuente y en ocasiones difícil de diagnosticar por lo que puede pasar desapercibida. No existe una evidencia clara con respecto al método diagnóstico y tratamiento específico de éste tipo de lesiones. De todas formas, las recomendaciones son una correcta reducción y osteosíntesis articular para alcanzar un resultado satisfactorio y función de agarre

Isolated first carpometacarpal joint dislocation managed with closed reduction and splinting.

A 56-year-old man, right-hand-dominant office worker, complained of pain and swelling at the base of his right thumb after using his hand to press onto the front passenger seat during an emergency brake. X-ray showed a dorsal dislocation of the first carpometacarpal joint of his right hand. Closed reduction of the joint was performed. As there were no clinical signs of instability post-reduction and X-ray confirmed that the joint was congruent, the joint was immobilised in a thumb spica splint for 6 weeks. His pain subsided and the range of motion of his first carpometacarpal joint was full at 9 weeks post-injury. Two years after the injury, he was asymptomatic and X-ray revealed normal joint anatomy with no obvious subluxation or osteoarthritic change. For patients with first carpometacarpal joint dislocations, non-operative management with splinting is a good option if the joint is stable post-reduction.

Intra-Articular Osteotomy for Symptomatic Bennett Fracture Malunion.

Bennett's fractures are the most common fractures around the trapeziometacarpal joint but require specialized radiographs to be correctly diagnosed. If a fracture is missed at initial presentation, it may heal with an intra-articular gap, leading to joint incongruency and a painful trapeziometacarpal joint. We present a new technique to correct the intra-articular gap and restore joint congruency in the event of a symptomatic Bennett malunion with a gap of at least 2 mm. The joint is exposed through an anterolateral approach, and the malunion is marked with K-wires under fluoroscopic control. A closing wedge osteotomy with excision of the malunion site is then performed to restore joint congruency. The osteotomy is fixed with 3 interfragmentary screws, and the joint is immobilized for 2 weeks before passive mobilization is initiated. Hardware can be removed between 3 and 6 months postoperatively after consolidation of the osteotomy. We recommend this technique in active patients without trapeziometacarpal osteoarthritis who present with a painful Bennett malunion. Restoration of the joint congruency reduces pain and may prevent the development of posttraumatic osteoarthritis.

Augmented External Fixation of Ulnar Carpometacarpal Joint Fracture Dislocations.

Ulnar-sided carpometacarpal (CMC) joint fracture dislocations are relatively uncommon, frequently associated with fractures of the metacarpal base and/or hamate, and often sustained by young male individuals secondary to striking a hard object. The complexity of ulnar-sided CMC fracture dislocations necessitates careful restitution of anatomic alignment and joint congruency for mobility and stability. Miniaturization of the external fixation device has allowed application to the hand. Spanning external fixation utilizes the principles of "ligamentotaxis"-indirect reduction through distraction forces of capsule-ligamentous structures. Treatment options for ulnar-sided CMC fracture dislocations are varied. Our surgical technique involving an external fixation device is reviewed. Clinical and chart review was performed on the last 10 patients undergoing acute surgical repair of ulnar-sided CMC fracture dislocations with intra-articular comminution by the senior author. Surgical technique used percutaneous Kirschner wire fixation and a spanning, miniature, external fixation device. Minimal follow-up was 1 year. Radiographs from the most recent appointment were evaluated by 2 independent reviewers. Patients rated their level of pain and assessed function using a subjective outcome instrument. Mean total active motion, when comparing traumatized digit to same digit in contralateral hand, was 100%. All fractures healed primarily with maintenance of congruent joint space and without radiographic displacement or arthrosis. Patient satisfaction was high and all patients returned to preinjury level of function. Our study demonstrates the use of an external fixation device in the management of ulnar-sided CMC fracture dislocations to be effective in reestablishing and maintaining normal hand anatomy, reducing pain, increasing function, and preserving motion.

Use of dorsal buttress plate fixation for ulnar carpometacarpal joint fracture dislocations for early mobilization: outcomes of 11 cases.

AIM: This study reviews the surgical outcomes of using dorsal buttress plate for open reduction and internal fixation of ulnar (5th, or 4th and 5th) CMCJ fracture subluxation or dislocations. METHODS: A retrospective review of 11 patients at our center who underwent operative fixation with dorsal buttress plating technique was performed. The surgery was performed between February 2012 and March 2017. Outcome measurements include radiographic evaluation of time to union, grip strength, and range of motion of the wrist. RESULTS: Of 11 patients in our case series, eight had injuries involving both 4th and 5th CMCJs, while three had isolated involvement of 5th CMCJ. Mean time to union on radiographs was 48 days (IQR 17.0; range 30-88). The median palmar flexion and dorsiflexion of the wrist were 56° (IQR 11.3; range 50°-80°) and 65° (IQR 10.0; range 60°-80°) respectively. Patients regained a median of 79% of grip strength (IQR: 36.0, range 43-100). All fingers achieved full range of motion, and no patient had scissoring of the fingers. Two patients had temporary mild numbness over the dorsoulnar aspect of the hand in the region of the 4th webspace. Five patients underwent removal of implants due to plate breakage (n = 2), or mild pain or pain with cold (n = 3). All patients were well after plate removal, and all the patients with pain had resolution of pain after implant removal. CONCLUSION: The dorsal buttress plate is a viable option for fixation of ulnar CMCJ fracture dislocations to allow early mobilization.

Dorsal buttress plate fixation for the treatment of fracture-dislocation of the fifth carpometacarpal joint with avulsion fracture of the hamate: a case report.

Fracture-dislocations of the fourth and fifth carpometacarpal (CMC) joints present a complex situation. Misdiagnosis and inadequate treatment may cause malunion and residual subluxation, which lead to painful arthritis and grip weakness. Open reduction along with internal fixation is the treatment of choice, but there is no consensus on an optimal treatment approach. We applied a novel surgical technique to treat a case of a fracture-dislocation of the fifth CMC joint with avulsion fracture of the hamate using a dorsal buttress plate between the hamate and the capitate. This method allowed for achieving rigid fixation without screw insertion across the bone fragments of the hamate. We could avoid the risk of unexpected fragmentation and unexpected damage to the volar neurovascular bundles around the hook of the hamate. Six months postoperatively, bone union was achieved and the reduction of the fourth and fifth CMC joints was maintained. Range of motion of the fourth and fifth CMC joints was almost equal to that on the contralateral side. Dorsal buttress plating between the hamate and the capitate could be an alternative technique for the treatment of fracture-dislocation of the fifth CMC joint with avulsion fracture of the hamate.

Reporte de caso: luxación simultánea carpometacarpiana del pulgar y los cuatro dedos / Case report: simultaneous carpometacarpal dislocation of the thumb and four fingers / Relato de caso: deslocamento carpometacarpal simultâneo do polegar e quatro dedos

Introducción: Las luxaciones carpo-metacarpianas son lesiones poco frecuentes, que van del 0.5 al 1% de las luxaciones de los huesos de la mano. Siendo extremadamente infrecuente la luxación simultanea de los 5 dedos. Objetivo: El objetivo de nuestro trabajo es documentar una lesión poco frecuente producida en un paciente asistido en nuestro centro. Así como realizar una puesta a punto sobre las medidas diagnósticas y terapéuticas de dicha lesión. Caso clínico: Se presenta el caso de un hombre de 63 años, diestro, artesano en hierro y madera, que sufre un accidente de tránsito de alta energía en moto versus auto, sufriendo traumatismo en mano derecha, sin presentar otros traumatismos. De la exploración física, en el departamento de emergencia, se constata la mano derecha dolorida con gran deformidad en dorso. Se diagnosticó: luxación dorsal carpo-metacarpiano de los 5 metacarpianos, con fractura del sector distal del trapecio, trapezoide, hueso grande y ganchoso. Se realizó reducción cerrada en block quirúrgico con anestesia general, siendo la reducción inestable se colocan agujas de Kirschner para su estabilización. Se confecciona, además, una férula de yeso de protección. Se solicitó una tomografía computada de control donde se objetiva buena reducción de las 5 articulaciones carpo-metacarpianas. Se retiraron las agujas de Kirschner a las 6 semanas. A los 3 meses de la lesión presenta una mano indolora, con buen rango de movilidad, con disminución a la fuerza prensil máxima comparada con la contralateral. El paciente reanuda sus tareas, incorporándose totalmente al trabajo a los 6 meses. Presenta, al año de la cirugía, un score de DASH excelente. Discusión: Las luxaciones de los 5 metacarpianos son lesiones extremadamente raras. Se han reportado en el mundo menos de 20 casos. A pesar de los elementos clínicos sugestivos, el diagnostico de esta lesión es difícil, siendo fundamental contar con un enfoque radiológico de perfil estricto de mano. Los resultados de esta lesión son inciertos, la función de la mano y la muñeca se mantiene pero frecuentemente asociado a una reducción de fuerza prensil. Este tipo de trauma lleva, en mayor o menor grado, al desarrollo de artrosis carpo metacarpiana a largo plazo.

Introduction: Carpometacarpal join dislocations, are really infrequent injuries, with an incidence that goes from 0,5 to 1% of all bone hand dislocations. Being extremely rare the simultaneous luxation of all five fingers. Objectives: Our work objective is to report a very infrequent injury found on a patient treated at our medical center. As well as getting up to date with diagnosis and treatment of such injury. Clinical case: A 63 year old male case is presented, right-handed, wood and iron artisan, who was involved in a high-impact car crush against a motorbike, suffering a trauma on his right hand, without any other injuries. At the emergency room, the physical examination showed a painful right hand deformed on the back. His diagnosis was dorsal carpometacarpal luxation of all 5 metacarpus, with a distal fracture of the trapezium, trapezoid, capitate and hamate bones. A closed reduction at the surgical room was performed, with general anesthesia, being the reduction unstable therefore Kirschner needles were used for stabilization. A plaster cast was used for its protection. A control tomography was performed showing good reduction of all 5 carpometacarpal joints. Kirschner needles were taken out 6 weeks later, at which point the rehabilitation program was started with the physiatrist team. Three months after the injury, the hand was painless, with a good range of movement, a diminished maximum catching strength compared with the other hand. The patient restarted his usual chores, fully reincorporating to his job 6 months later. He presents an excellent DASH score one year after surgery. Discussion: Luxation of all 5 metacarpus is an extremely rare injury. It has been reported less than 20 cases worldwide. In spite of clinical suggestive elements, the diagnosis of this injury is quite difficult, being of great importance to count with x-rays with a straight profile incidence of the hand. The results of this injury are uncertain; the functionality of the hand and wrist is frequently sustained associated with a reduction of the catching strength. This type of trauma will end up developing in greater or lesser degree, long term carpometacarpal arthrosis.

Introdução: As luxações carpo-metacarpianas são lesões raras, variando de 0,5 a 1% das luxações dos ossos da mão. O deslocamento simultâneo dos 5 dedos é extremamente incomum. Objetivo: O objetivo do nosso trabalho é documentar uma lesão rara produzida em um paciente assistido em nosso centro. Bem como realizar um set-up nas medidas diagnósticas e terapêuticas da referida lesão. Caso clínico: O caso de um homem de 63 anos, destro, artesão em ferro e madeira, que sofre um acidente de motocicleta de alta energia em uma motocicleta contra um carro, sofrendo traumatismo em sua mão direita, sem apresentar outras lesões, é apresentado. A partir do exame físico no pronto-socorro, há uma dor na mão direita com grande deformidade nas costas. Foi diagnosticado: luxação metacarpal do dorsal do carpo dos 5 metacarpos, com fratura do setor trapézio distal, trapézio, osso grande e hamato. Uma redução fechada foi realizada em um bloco cirúrgico com anestesia geral, com a redução instável sendo colocada com fios K para estabilização. Uma tala de gesso protetora também é feita. Solicitou-se tomografia computadorizada de controle, onde foi observada boa redução das 5 articulações carpo-metacarpianas. Os fios de Kirschner foram removidos às 6 semanas. Aos 3 meses após a lesão, ele apresenta uma mão indolor, com boa amplitude de mobilidade, com diminuição da força preênsil máxima em comparação com a força contralateral. O paciente retoma suas tarefas, ingressando totalmente no trabalho aos 6 meses. Um excelente escore DASH é apresentado um ano após a cirurgia. Discussão: As luxações dos 5 metacarpos são lesões extremamente raras. Menos de 20 casos foram relatados no mundo. Apesar dos elementos clínicos sugestivos, o diagnóstico dessa lesão é difícil, sendo fundamental a abordagem radiológica do perfil estrito da mão. Os resultados dessa lesão são incertos, a função da mão e do punho é mantida, mas freqüentemente associada a uma redução na força de preensão. Este tipo de trauma leva, em maior ou menor grau, ao desenvolvimento de artrose metacarpal do carpo a longo prazo.

[Mini locked-plate trans-carpometacarpal joint internal fixation for treating comminuted fracture of base of the fifth metacarpal].

Objective: To evaluate the effectiveness of open reduction and trans-carpometacarpal joint internal fixation with mini locked-plate for treatment of comminuted fracture of base of the fifth metacarpal. Methods: Between July 2015 and December 2017, 8 cases of comminuted fractures of base of the fifth metacarpals were treated with open reduction and trans-carpometacarpal joint internal fixation with mini locked-plate. There were 7 males and 1 female with an age of 19-45 years (mean, 32.5 years). The causes of injury included 2 cases of hitting hard objects while clenching fist, 6 cases of falling injury. There were 2 cases of subluxation of fifth carpal joints and 1 case of dislocation. The time from injury to operation was 1-5 days (mean, 3.5 days). The stability of fracture ends could not be maintained by preoperative evaluation without over articular fixation or short time over articular fixation. Postoperative complications and fracture healing were observed, and hand function was evaluated at last follow-up according to the total active motion (TAM) recommended by the Branch of Hand Surgery of Chinese Medicine Association. Results: All the incisions healed by first intention without complications such as wound infection, cutaneous necrosis, tendon or nerve injury. All the patients were followed up 6-18 months (mean, 12 months). All fractures healed with the healing time of 12-16 weeks (mean, 13 weeks). Within 4 months after operation, all patients were able to return to pre-injury job. At last follow-up, according to the TAM recommended by the Branch of Hand Surgery of Chinese Medicine Association, the results were excellent in 7 cases, good in 1 case, with the excellent and good rate of 100%. Conclusion: Applying of mini locked-plate for treatment of comminuted fractures of base of the fifth metacarpal, of which cannot obtain stable fixation through non-transarticular or short-time transarticular fixation, can achieve satisfactory functional results with very few complications through trans-carpometacarpal joint approach, thus the procedure can be used as an alternative operation scheme.

Volar dislocation of the second and third carpometacarpal joints - the Lisfranc injury of the hand?

A case of an isolated volar dislocation of the second and third carpometacarpal (CMC) joints in an 18-year-old man is described. He presented following a game of rugby unable to move his hand or wrist. He was managed by manipulation and K-Wire fixation. Hand function was excellent following wire removal and mobilization. This is an extremely rare injury, easily missed. The mechanism of injury described leads to comparison with the Lisfranc injury of the foot.