Tratamento integrado para correção do sorriso gengival: relato de caso / Integrated treatment for correction of gingival smile: case report

O sorriso gengival possui inúmeras causas, podendo acontecer por motivos esqueléticos, musculares ou por alteração no desenvolvimento dos tecidos de suporte. No entanto, na atualidade, a estética vermelha e a branca têm se apresentado completamente passíveis de transformações e com uma gama de procedimentos cirúrgicos ou não cirúrgicos para sanar as queixas dos pacientes. O objetivo geral deste trabalho é mostrar o poder que a odontologia tem frente às questões estéticas, como, por exemplo, a vergonha de sorrir por não se sentir confortável com os dentes curtos e com uma grande faixa de gengiva sendo exposta. O método utilizado foi um relato de caso. Que descreve todos os passos clínicos do tratamento de um paciente de 40 anos, que estava insatisfeita com o seu sorriso por apresentar erupção passiva alterada juntamente com hiperatividade do lábio superior. O plano de tratamento escolhido foi de realizar a cirurgia de aumento de coroa clínica estético, seguido de clareamento dentário e posteriormente um reposicionamento labial, com ajuda da toxina botulínica. Finalizando, para ajudar na cicatrização, o uso de laserterapia. O resultado de todo o processo cirúrgico envolvido neste trabalho, é satisfação do paciente, materializando o sonho deste, devolvendo segurança e espontaneidade ao sorrir. Pôde-se observar que através da combinação de técnicas cirúrgicas periodontais para tratar o sorriso gengival, obtém-se êxito tanto no sentido científico quanto no biológico, alcançando um sorriso esteticamente mais atrativo(AU)

Gummy smile has numerous causes, which can occur for skeletal or muscular reasons or due to changes in the development of supporting tissues. However, nowadays, the red and white aesthetics have been completely capable of transformation and with a range of surgical or non-surgical procedures to resolve patients' complaints. The general objective of this work is to show the power that dentistry has in the face of aesthetic issues, such as, for example, the shame of smiling due to not feeling comfortable with short teeth and a large strip of gum being exposed. The method used was a case report. Which describes all the clinical steps of the treatment of a 40-year-old patient, who was dissatisfied with her smile due to an altered passive eruption together with hyperactivity of the upper lip. The chosen treatment plan was to perform aesthetic clinical crown augmentation surgery, followed by tooth whitening and later lip repositioning, with the help of botulinum toxin. Finally, to help with healing, the use of laser therapy. The result of the entire surgical process involved in this work is patient satisfaction, materializing the patient's dream, restoring security and spontaneity when smiling. It was observed that through the combination of periodontal surgical techniques to treat gummy smile, success is achieved both in the scientific and biological sense, achieving a more aesthetically attractive smile(AU)

A comparative study of the use of digital technology in the anterior smile experience.

OBJECTIVES: this study aims to compare the clinical outcomes of traditional and digital crown extension guides in the aesthetic restoration of anterior teeth. Additionally, the study will analyze the differences in the results of various digital crown extension guides in anterior aesthetic restorations. METHODS: Sixty-two patients who required aesthetic restoration of their anterior teeth were selected for this study. The patients had a total of 230 anterior teeth and were randomly divided into three groups: a control group of 22 cases who received diagnostic wax-up with pressure film, an experimental group 1 of 20 cases who received 3D printed digital models with pressure film, and an experimental group 2 of 20 patients who received digital dual-positioning guides. The control group had a total of 84 anterior teeth, experimental group 1 had 72 anterior teeth, and experimental group 2 had 74 anterior teeth. The study compared three methods for fabricating crown extension guides: the control group used the diagnostic wax-up plus compression film method, while experimental group 1 used compression film on 3D printed models and experimental group 2 used 3D printed digital dual-positioning crown extension guides. After the crown lengthening surgery, the control group patients wore DMG resin temporary crown material for gingival contouring, while the experimental group patients wore 3D printed resin temporary crowns for the same purpose. The patients were followed up in the outpatient clinic after wearing temporary crowns for 1 month, 3 months, and 6 months, respectively. The clinical results were evaluated in terms of marginal fit, red aesthetic index, and white aesthetic index. RESULTS: Based on the statistical analysis, the experimental group required significantly fewer follow-up visits and less time for guide design and fabrication compared to the control group. Additionally, the surgical time for the experimental group was significantly shorter than that of the control group. During the postoperative period between the 1st and 3rd month, the PES index scores for the marginal gingival level, proximal, and distal mesiodistal gingival papillae of the experimental group showed a trend of superiority over those of the control group. By the 6th month, the marginal gingival level exhibited a significant difference between the experimental and control groups. The experimental group demonstrated superior results to the control group in terms of shape, contour, and volume of the teeth, color, surface texture, and transparency of the restorations, and features during the 1st and 3rd postoperative months. In the 6th month, the comparative results indicated that the experimental group continued to exhibit superior outcomes to the control group in terms of the shape, color, surface texture, and transparency of the restorations, as well as the characteristics of the teeth. Additionally, the experimental group demonstrated significantly fewer gingival alterations than the control group at 1 month, 3 months, and 6 months post-procedure, with this difference being statistically significant. Furthermore, the combination of 3D printing technology and restorative techniques was utilized, resulting in consistent patient satisfaction. CONCLUSION: Digitalisation plays an important role in anterior aesthetic restorations. The use of digital technology to manage the entire process of anterior cosmetic restorations can improve restorative results, reduce the number of follow-up appointments, shorten consultation time, and achieve better patient satisfaction.

Tratamento do sorriso gengival por meio da cirurgia periodontal: relato de caso / Treatment of gummy smile through periodontal surgery: case report

A busca por um sorriso considerado perfeito tem sido cada vez maior e isso tem se tornado um desafio para o Cirurgião-Dentista, visto que um sorriso harmônico não envolve somente dentes, mas também gengiva. A exposição excessiva da gengiva ao sorrir ou falar é considerada uma característica antiestética, pois gera uma desarmonia entre dentes, gengiva e lábios. Quando o paciente expõe 3 milímetros ou mais de gengiva ao sorrir, chamamos essa exposição de Sorriso Gengival. O presente trabalho tem como objetivo relatar o tratamento de um caso de sorriso gengival, onde foi realizada cirurgia periodontal ressectiva a fim de diminuir a exposição de tecido gengival ao sorrir. Descrição do caso: Paciente adulto 21 anos, sexo masculino, procurou atendimento no curso de graduação em Odontologia do Centro Universitário da Serra Gaúcha ­ FSG, com queixa de insatisfação estética devido ao tamanho de seus dentes e mostrar muito tecido Gengival ao sorrir. Após anamnese, exame clínico e radiográfico, o paciente foi diagnosticado com Sorriso gengival. O plano de tratamento proposto foi de cirurgia periodontal ressectiva. Conclusão: A partir do exposto, podemos concluir que o tratamento do sorriso gengival depende de sua etiologia. Um correto diagnóstico é de extrema importância, pois dependendo do fator etiológico do sorriso gengival, o plano de tratamento pode ser elaborado de acordo com a necessidade do paciente. No caso apresentado, o procedimento escolhido, cirurgia periodontal ressectiva, se mostrou efetivo no tratamento do sorriso gengival, devolvendo estética e satisfação ao paciente(AU)

The search for a smile that is considered perfect has been increasing and this has become a challenge for the Dental Surgeon, since a harmonious smile does not only involve teeth, but also gums. Excessive exposure of the gums when smiling or talking is considered an unsightly feature, as it creates disharmony between teeth, gums and lips. When the patient exposes 3 millimeters or more of gum when smiling, we call this exposure Gummy Smile. The present work aims to report the treatment of a case of gummy smile, where resective periodontal surgery was performed in order to reduce the exposure of gingival tissue when smiling. Case description: A 21-year-old adult patient, male, sought care at the undergraduate course in dentistry at the Centro Universitário da Serra Gaúcha ­ FSG, complaining of aesthetic dissatisfaction due to the size of his teeth and showing a lot of gingival tissue when smiling. After anamnesis, clinical and radiographic examination, the patient was diagnosed with gummy smile. The proposed treatment plan was resective periodontal surgery. Conclusion: From the above, we can conclude that the treatment of gummy smile depends on its etiology. A correct diagnosis is extremely important, because depending on the etiological factor of the gummy smile, the treatment plan can be elaborated according to the patient's needs. In the case presented, the chosen procedure, resective periodontal surgery, proved to be effective in the treatment of gummy smile, restoring aesthetics and patient satisfaction(AU)

Aumento de coroa clínica: reparação do desequilíbrio dentogengival com finalidade estética / Clinical crow augmentum: repair of the dentogengival imbalance with aesthetic purpose

O anseio por um sorriso harmônico tem se tornado cada vez maior, uma vez que muitos pacientes relatam desconforto ao sorrir, pois correlacionam a estética do sorriso a problemas de baixa autoestima e em alguns casos suscetibilidade a alterações psicossociais decorrente aos padrões estéticos impostos pela sociedade. O sorriso gengival é uma das grandes queixas relatadas por pacientes. A exposição excessiva de gengiva maxilar pode ser decorrente a fatores gengivais, ósseos, dentários e musculares. Dentre os tratamentos disponíveis para diminuir essa exposição, contamos com cirurgias periodontais, aplicação de toxina botulínica, tratamentos ortodônticos, cirurgia ortognática e reposicionamento labial. O tratamento adequado será definido de acordo com o fator etiológico de cada caso. Diante disso o objetivo do trabalho é realizar um relato de caso sobre aumento de coroa clínica estética. A paciente estava descontente com a exibição de uma grande quantidade gengival ao sorrir. Após estudos clínicos e de imagem o diagnóstico foi de erupção passiva alterada, tipo IB. O tratamento de escolha foi a gengivoplastia associada a remodelação óssea osteotomia e osteoplastia. O tratamento estético vai além de uma boa aparência, através deste trabalho, foi possível evidenciar impactos benéficos que o sorriso harmônico pode acarretar na vida do indivíduo, atendendo suas expectativas e a do cirurgião-dentista(AU)

The desire for a harmonic smile has become increasing, since many patients report discomfort when smiling, as they correlate smile aesthetics to problems of low self-esteem and in some cases susceptibility to psychosocial changes due to aesthetic standards imposed by society. Gummy smile is one of the major complaints reported by patients. Excessive exposure of the maxillary gingiva may be due to gingival, bone, dental and muscular factors. Among the treatments available to reduce this exposure, we have periodontal surgeries, botulinum toxin application, orthodontic treatments, orthognathic surgery and lip repositioning. The appropriate treatment will be defined according to the etiological factor of each case. Therefore, the objective of this work is to carry out a case report on aesthetic clinical crown augmentation. Patient discount with the display of a large amount of gingival when smiling. After clinical and imaging studies, the diagnosis was an altered passive eruption, type IB. The treatment of choice was gingivoplasty associated with bone remodeling, osteotomy and osteoplasty. Final comments and conclusions: The aesthetic treatment goes beyond a good appearance, through this work, it was possible to evidence beneficial impacts that the harmonic smile can have on the individual's life, meeting their expectations and that of the dentist(AU)

Biological shaping as a conservative alternative for crown lengthening: A review.

OBJECTIVES: The perio-restorative approach to maintaining supracrestal tissue attachment (STA; formerly known as biologic width) is a fundamental goal in modern dentistry. This article aims to review the clinical impact of biologic shaping (BS) as an innovative alternative to traditional crown lengthening procedures, reflecting over two decades of clinical experience. MATERIAL AND METHODS: As a review paper, it is crucial to highlight that BS stands as a unique approach designed to optimize STA while emphasizing minimal to no removal of supporting bone. The review spans over two decades, consistently demonstrating clinical efficacy and predictability. Remarkably, BS focuses on addressing issues such as root concavities, developmental grooves, irregularities, furcation lips, and CEJ offering a remarkable level of clinical precision. RESULTS: The reviewed literature underscores that BS has consistently achieved substantial clinical success in fulfilling its objectives. This method presents a biologically sound alternative to traditional crown lengthening, placing a strong emphasis on the preservation of essential bone tissue and the establishment of durable STA. CONCLUSIONS: The results suggest that BS is a logical and biologically driven approach for maintaining STA, making it a promising alternative to traditional crown lengthening. The method offers a predictable and reproducible way to preserve bone tissue while achieving durable STA. This innovation holds great promise in the field of periodontal and restorative dentistry.

Treatment of excessive gingival display using conventional esthetic crown lengthening versus computer guided esthetic crown lengthening: (a randomized clinical trial).

BACKGROUND: Surgical guides have been proposed in an attempt to reach more predictable outcomes for esthetic crown lengthening. The objective of the present study was to evaluate the effectiveness of esthetic crown lengthening using 3D-printed surgical guides in the management of excessive gingival display due to altered passive eruption type 1B. MATERIALS AND METHODS: Sixteen patients diagnosed with altered passive eruption type 1B, were divided into two groups. In the control group, the procedure was carried out conventionally, and in the study group, a dual surgical guide was used. The parameters of wound healing (swelling, color, probing depth, bleeding index, and plaque index), pain scores, gingival margin stability, and operating time were assessed at 1 week, 2 weeks, 3 months, and 6 months postoperatively. RESULTS: There was no statistically significant difference in terms of wound healing, pain scores, and gingival margin stability between both groups at different time intervals (P = 1), however, there was a statistical difference between both groups in terms of operating time with the study group being significantly lower (P < 0.001). CONCLUSION: Digitally assisted esthetic crown lengthening helps shorten the operating time and reduces the possibility of human errors during the measurements. This will be useful in helping practitioners achieve better results. PRACTICAL IMPLICATIONS: The conventional method remains to be the gold standard. However, shorter operating time and lower margins for errors will help reduce costs as the chair side time is reduced as well as the possibility for a second surgery is lower. This will improve patient satisfaction as well.

Staged esthetic crown lengthening: Classification and guidelines for periodontal-restorative therapy.

OBJECTIVE: This article presents technical guidelines for perio-restorative esthetic crown lengthening, along with a discussion of the biologic rationale. A classification system is proposed to assist in treatment planning and sequencing the surgical and restorative phases. CLINICAL CONSIDERATIONS: When esthetic crown lengthening is performed as an adjunct to restorative therapy, the surgical approach must be determined by the anticipated position of the restorative margins. The removal of sufficient bone to achieve the desired clinical crown length and preserve the supracrestal gingival tissue dimensions is facilitated by the use of a surgical guide fabricated according to the design of the restorations. A staged approach allows sequencing the provisional restoration to minimize unesthetic sequelae during the healing period. Inadequate bone resection and/or alteration of the soft tissue dimensions results in delayed healing, leading to coronal gingival rebound and biologic width impingement. CONCLUSION: The identification and preservation of appropriate restorative and biologic landmarks is essential for success in pre-prosthetic esthetic crown lengthening treatment. A staged approach improves the esthetic management during the postsurgical healing and maturation period. CLINICAL SIGNIFICANCE: A restorative driven classification system for sequencing and staging adjunctive esthetic crown lengthening procedures is presented. Technical guidelines to enhance gingival margin predictability are suggested, accompanied by relevant evidence. In addition, wound healing timelines following gingival and osseous resection are provided.

Dental and periodontal dimensions stability after esthetic clinical crown lengthening surgery: a 12-month clinical study.

OBJECTIVES: To evaluate the stability of periodontal tissues 3 (T3), 6 (T6), and 12 (T12) months after esthetic crown lengthening (ACL) and the possible correlations between changes in those structures. MATERIALS AND METHODS: Twenty individuals were evaluated through clinical assessment, photography, and tomography. Measurements included gingival margin (GM), clinical crown length (CCL), interdental papilla height (PH) and width (PW), gingival thickness (GT), bone thickness (BT), probing depth (PD), distance between alveolar crest and GM, distance between alveolar crest and cementoenamel junction. Nonparametric and correlation statistics were performed (p < 0.05). RESULTS: CCL at T0 was 7.42 ± 0.70 mm and increased to 9.48 ± 0.49 mm immediately after ACL, but it decreased to 8.93 ± 0.65 mm at T12. PD decreased 0.60 mm from T0 to T6, and it increased 0.39 mm from T6 to T12. BT decreased 0.20 mm, while GT increased 0.29 mm from T0 to T12. Both PW and PH showed enlargement in T12. A positive moderate correlation was found between CCL/T0 and CCL/T12, GT/T0 and AC-GM/T12, BT/T0 and GT/T12. A few negative moderate correlations were PD/T0 and CCL/T12, PD/T0 and PH/T0, PD/T0 and BT/T12. CONCLUSIONS: ACL procedure was effective. Although some rebound occurred, that was not clinically important. PD tended to reestablish its original length, partially due to a migration of GM during the healing period. Besides, a thickening of supracrestal soft tissues was observed. CLINICAL RELEVANCE: The present study centers on the factors influencing the stability of periodontal tissues after esthetic crown lengthening, underscoring the procedure's influence on esthetics and biology and the need for careful treatment planning.

Pre-restorative crown lengthening surgery: influence of restorative treatment timing on clinical outcomes-a pilot study.

OBJECTIVES: Aim of this study was to assess the influence of restorative treatment timing on the periodontal, patient and operator-reported outcomes following crown lengthening surgery (CLS). MATERIALS AND METHODS: Eighteen study participants requiring CLS were divided into two groups based on prosthetic rehabilitation timing (6 or 14 weeks postoperatively). Clinical parameters were recorded around treated and neighboring teeth before and after surgery, 6 and 14 weeks postoperatively, at prosthesis delivery, and three and six months after. Soft tissue and radiographic bone changes were evaluated. Patients assessed their perception of the procedure by means of a questionnaire. The final treatment outcome was rated by both patients and prosthodontists. RESULTS: CLS resulted in statistically significant and stable apical displacement of the gingival margin, at both treated and adjacent sites. Plaque and bleeding scores remained low throughout. No statistically significant differences were observed between groups for any clinical or radiographic parameter examined. Healing was uneventful and treatment outcome was satisfying for both patients and prosthodontists, without statistically significant differences between groups. CONCLUSIONS: The present study has been characterized as pilot, because it was not possible to reach the sample size indicated by the a priori power analysis. CLS is an effective pre-prosthetic procedure as long as it is performed under a certain surgical protocol which predicts for at least a 3 mm distance between bone crest and the flap margin at suturing. Within the limitations of this study, six weeks after surgery may be an adequate healing time for the onset of prosthetic restoration. CLINICAL RELEVANCE: Crown lengthening surgery is commonly performed in daily clinical practice with the aim to restore teeth with short clinical crowns. Based on periodontal, patient and operator-reported criteria, 6 weeks after CLS may be adequate healing time before the onset of prosthetic restoration. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT03947658, 13/05/2019, retrospectively registered.

Use of both the diode and Er: YAG lasers in esthetic crown lengthening with the aid of digitally guided dual technique: 3 years follow-up.

OBJECTIVE: To explore the feasibility of the usage of digital guides in combination with low- and high-power lasers for the treatment of excessive gingival display, also known as "gummy smile". CLINICAL CONSIDERATIONS: Excessive gingival display due to altered passive eruption can affect patient's perception of their own esthetics and consequently have an impact on self-confidence. Therefore, the management of this condition should offer a predictable and stable long-lasting solution. To attain these objectives, digital planning emerges as a tool in optimizing the outcomes of crown lengthening surgery for this condition by enhancing precision through the use of surgical guides. Additionally, the usage of high- and low-powered lasers can provide a safe approach because of their tissue selective removal properties. CONCLUSIONS: The technique described showed satisfactory clinical results in the short- and long-term follow-up, leading to an improvement in patients' self-esteem. This approach integrates digital and laser technologies to deliver a surgical treatment characterized by precision, efficiency, and safety. CLINICAL SIGNIFICANCE: Digital dentistry has contributed to innovative dental procedures, as personalizing surgical guides for patients, assisting and guiding incisions of the gingival margins, as well as the extension of the osteotomy, during the procedures for increasing the clinical crown. Furthermore, smile esthetics are directly related to an individual's improved emotional and social quality of life.

Effects of the GingivalStat approach on early gingival margin remodeling following esthetic clinical crown lengthening: A case series.

OBJECTIVES: The aim of this case series is to present the potential applications of the GingivalStat approach, that is, the use of temporary gingival stabilizers, to favor early gingival margin remodeling and prevent the occurrence of gingival rebound following esthetic clinical crown lengthening. CLINICAL CONSIDERATIONS: Four patients requiring clinical crown lengthening were treated for esthetical and functional reasons. The surgical approach included: (a) gingival margin recontouring; (b) full-thickness flap elevation; (c) osteotomy (to achieve an adequate dimension between the alveolar bone crest and the CEJ) and osteoplasty (to reduce the bone thickness and improve the buccal bone anatomic profile, where indicated); (d) temporary gingival stabilizer placement using a block-out resin or a composite (the GingivalStat approach); and (e) flap repositioning, adaptation, and suture. One- to five-year follow-ups, reported in the different case scenarios, show evidence of clinically stable gingival margins around the treated teeth. CONCLUSIONS: Within the limits of this case series, it can be concluded that the GingivalStat approach appears as a further maneuver to cope with clinical crown lengthening procedures at esthetic sites. GingivalStat seems to favor gingival margin contour remodeling during the early phase of healing as well as prevent the occurrence of gingival rebound. CLINICAL SIGNIFICANCE: GingivalStat approach may guide gingival margin remodeling and prevent gingival rebound after wound healing of sites submitted to esthetic clinical crown lengthening.

Biological evaluation of indirect restorations in endodontically treated posterior teeth with deeply located proximal margins following deep margin elevation versus surgical crown lengthening: a randomized controlled trial.

OBJECTIVE: The current clinical trial was conducted to evaluate the effect of proximal indirect restorations in endodontically treated posterior teeth with deeply located margins following deep margin elevation compared to surgical crown lengthening. MATERIAL AND METHODS: Deep proximal cavities in endodontically treated posterior teeth were randomly assigned into two groups; deep margin elevation (DME) or crown lengthening (CL). The clinical attachment level (CAL), probing depth (PD), bleeding on probing (BOP), crestal bone level (CBL), and secondary caries were evaluated at the baseline, 1, 3, 6, 9, and 12 months. RESULTS: A total of 20 proximal cavities were included in the study; there was no significant difference between the two groups regarding mean CAL values at the baseline and 1 month, while there was a significant difference between the two groups in all other periods. Regarding the PD, there was no statistical significance between the two groups except at 9 and 12 months, where CL showed higher mean PD values than DME. There was no statistically significant difference in BOP or CBL between the two groups. CONCLUSIONS: DME and CL are considered clinically successful with favorable biologic responses. CLINICAL RELEVANCE: The deep margin elevation approach could provide a more conservative solution when relocating deeply seated cervical margins in a more coronal position. DME reduced the number of visits and time needed for the restoration of endodontically treated teeth. Surgical crown lengthening remains a gold standard procedure in the re-establishment of the supracrestal tissue attachment, especially in cases where cervical margins are beyond the elevation capacity.

Evaluating the prospective crown-root ratio after extrusion and crown lengthening procedures in vitro.

For restoration of extensively damaged teeth preprosthetic treatment measures are necessary. Crown lengthening and extrusion affect the prospective crown-root ratio (CRR). The subject of this in vitro study was to compute CRRs for both treatment approaches. 120 human maxillary central extracted incisors were measured. Measurements were calculated for five treatment groups: C (control), E-2 mm (extrusion of 2 mm), E-4 mm (extrusion of 4 mm), CL-2 mm (crown lengthening of 2 mm), and CL-4 mm (crown lengthening of 4 mm). Tooth (TL), root (RL), and crown lengths (CL) were measured from mesial (m) and facial (f) cemento-enamel junction (CEJ), and respective anatomic (CRR) and effective crown-root ratios (eCRR) were calculated. Following CRR values were computed for C: CRR-m = 0.4 ± 0.1, CRR-f = 0.7 ± 0.1. All crown-root ratios were lower (more favourable) for extrusion compared to crown lengthening (p < 0.001). ECRRs were higher than anatomic CRRs. CRR at mesial CEJ was significantly lower than CRR with facial CEJ as reference (p < 0.001). Mesial measurement-based calculations of CRR typically based on radiographic images should be interpreted with caution as they underestimate the eCRR. CRR can be expected as lower, i.e. more favourable, when teeth are extruded than crown lengthened.

Deep Margin Elevation: Next-Level Adhesive Dentistry to Avoid Surgical Crown Lengthening.

Surgical crown lengthening (SCL) is the treatment of choice to ensure healthy tissues when subgingival tooth defects encroach on the biologic width.1 However, restorative techniques employing adhesive dentistry may provide viable alternatives to or complement SCL in select cases without the repercussions of surgical bone removal and open interproximal spaces. One such clinical technique, deep margin elevation (DME), employs a direct restoration to relocate the cervical margin of small subgingival defects of posterior teeth supragingivally. The "elevated" margin simplifies impression-making and bonding of indirect restorations, especially inlays and onlays. Recent scientific systematic literature reviews indicate favorable clinical outcomes and suggest that DME restorations made with scrupulous care have high success rates and are compatible with periodontal health. Optimal working field isolation, meticulous placement of matrices, proper bonding and buildup procedure, as well as regular maintenance and follow-up are essential for success. This article provides an overview of this approach.

Esthetic rehabilitation through crown lengthening and laminate veneers.

AIM: To describe a digital workflow utilizing 3D printing technology to guide esthetic crown lengthening and control tooth preparation. CLINICAL CONSIDERATIONS: After the initial intraoral and face scans, an esthetic treatment plan was performed digitally based on the patient's personality and face type using artificial intelligence-based 3D smile design software. A 3D-printed tray relined with silicone over a 3D-printed model was used for the mock-up. A 3D-printed guide was implemented to assist esthetic crown lengthening by incorporating, simultaneously, information about the desired free gingival line and the alveolar bone level. Based on the initial planning, a set of reduction guides was 3D printed to check and correct the tooth preparation. Prior to the start of construction of the final monolithic restorations, their design was verified using 3D-printed prototypes. A stabilization splint was digitally designed and 3D printed to protect and maintain the final result. CONCLUSIONS: Technologic advances can improve the predictability of an interdisciplinary esthetic approach. Digital planning can be transferred to clinical reality using a digital workflow, utilizing a set of appropriate 3D-printed guides, which can help to control clinical procedures based on the initial planning. CLINICAL SIGNIFICANCE: By following the proposed step-by-step workflow, clinicians can achieve predictable results through an interdisciplinary approach, guiding both the periodontal plastic surgery and the restorative treatment after an individualized CAD/CAD procedure for 3D-printed guides.

[How long does a tooth last after a surgical crown lengthening?] / Hoe lang gaat een gebitselement mee na een chirurgische kroonverlenging?

The presence of subgingival pathology, such as a deep secondary caries lesion, a fracture, an already existing restoration that needs to be replaced or the presence of a resorption defect, can constitute a difficult starting situation for the preservation of a tooth. How to deal with such a situation has been a topic of discussion for years. Surgical crown lengthening is one of the first and classic treatment options that is often chosen in such cases. Crown lengthening is a periodontal surgical technique to obtain extra supra crestal clinical crown length. The question is, what is the long-term prognosis of teeth after surgical crown lengthening. To answer this question, a review of the literature was carried out looking for clinical studies examining survival. Four studies with a follow-up of at least 5 years were included. The factors that adversely affect survival of the tooth after the crown lengthening are an unfavourable crown-root ratio, insufficient plaque control and moderate ability to keep the restoration clean.

Restauração transcirúrgica: inter-relação periodontia e dentística / Transsurgical restoration: interrelationship between periodontics and dentistry

Tendo em vista a importância da relação Dentística Restauradora e Periodontia na Odontologia atual, o presente estudo demonstrou o relato de um caso clínico realizado no Complexo Odontológico do Centro Universitário da Serra Gaúcha (FSG), retratando um procedimento de restauração transcirúrgica em um paciente cujo elemento 13 estava comprometido com uma cavidade subgengival disto-palatino, sendo a resina composta o material restaurador de escolha. Este estudo teve como objetivo apresentar um caso clínico demonstrando a técnica de restauração transcirúrgica e a integração do planejamento entre Periodontia e Dentística Restauradora realizado na Clínica de Odontologia do Centro Universitário da Serra Gaúcha -FSG. Este trabalho mostrou a importância da realização de uma técnica cirúrgica e restauradora correta por parte dos cirurgiões-dentistas, assim como na verificação de que os tecidos periodontais podem reagir de forma positiva à presença de materiais restauradores adesivos posicionados subgengivalmente(AU)

In view of the importance of the restorative dentistry and periodontics relationship in current dentistry, the present study demonstrated the report of a clinical case carried out in the Dental Complex of the Centro Universitário da Serra Gaúcha - FSG, portraying a transsurgical restoration procedure in a patient whose element 13 was compromised with a subgingival cavity of this-palatine, the composite resin being the restorative material of choice. This study aimed to present a clinical case demonstrating the technique of transsurgical restoration and the integration of planning between Periodontics and Restorative Dentistry carried out at the Dentistry Clinic of the University Centro Universitário da Serra Gaúcha - FSG. This study showed the importance of performing a correct surgical and restorative technique by dentists, as well as in verifying that periodontal tissues can react positively to the presence of adhesive restorative materials positioned subgingival(AU)

Reabilitação estética anterior em abordagem multidisciplinar: relato de caso / Aesthetic rehabilitation in a multidisciplinary approach: case report

A estética tem um papel importante na aceitação e autoestima das pessoas e, em virtude disso, os pacientes buscam cada dia mais ter um sorriso harmonioso. As reabilitações estéticas devem envolver um planejamento completo, atrelando função e estética, avaliando tamanho dos dentes, perfil e alturas gengivais, altura do sorriso e corredor bucal. Por conta disso, a odontologia nos permite uma série de abordagens terapêuticas diferentes que chegam a resultados satisfatórios para o paciente. Sendo assim, o presente trabalho tem como objetivo descrever um relato de caso de uma paciente com queixa estética do seu sorriso devido à diferentes tonalidades, formas e tamanhos dos dentes. Após anamnese, exame clínico e radiográfico, o plano de tratamento proposto foi de harmonizações periodontal com aumento de coroa e enxerto gengival, além de coroas em cerâmicas de dissilicato de lítio. Dentro desse contexto, mostra-se que uma abordagem multidisciplinar para reabilitação estética e funcional do sorriso é fundamental, a qual nos proporciona equilíbrio e naturalidade entre estética branca e vermelha no resultado do tratamento reabilitador(AU)

Aesthetics plays an important role in people's acceptance and self-esteem and, as a result, patients increasingly seek to have a harmonious smile. Aesthetic rehabilitations must involve a complete planning, linking function and aesthetics, evaluating tooth size, gingival profile and heights, smile height and buccal corridor. Because of this, dentistry allows us a series of different therapeutic approaches that reach satisfactory results for the patient. Therefore, the present work aims to describe a case report of a patient with an aesthetic complaint of her smile due to different shades, shapes and sizes of teeth. After anamnesis, clinical and radiographic examination, the proposed treatment plan was periodontal harmonization with crown augmentation and gingival graft, in addition to lithium disilicate ceramic crowns. Within this context, it is shown that a multidisciplinary approach to the aesthetic and functional rehabilitation of the smile is fundamental, which provides us with balance and naturalness between white and red aesthetics in the result of the rehabilitation treatment(AU)

Effect of apical root resection, orthodontic extrusion, and surgical crown lengthening on load capability.

OBJECTIVES: This study aims to investigate the load-to-fracture of procedures changing crown-to-root ratio (RCRR) aimed to restore severely damaged upper central incisors to avoid tooth extraction compared to implant placement. There is no evidence on load capability after apical root resection (AR), orthodontic extrusion (OE), and surgical crown lengthening (SCL) in respect to RCRR, respectively. MATERIAL AND METHODS: Human maxillary central incisors were endodontically treated, decoronated, and divided into 4 groups (n = 48). The following specimen preparation was performed: (I) adhesive core-and-post build-up (control), (II) as (I) and 2 mm apical root resection (AR), (III) before adhesive core-and-post build-up teeth were shortened 2 mm coronally (OE) (IV) as (I), but specimens were embedded 4 mm instead of 2 mm below the CEJ (SCL), group (V) implant-borne restoration with individual all-ceramic abutments (n = 12; ∅4.1/l = 12 mm) (IBR). All specimens received all-ceramic crowns, thermo-mechanical (TML), and subsequent linear loading (LL) until failure. RCRR were calculated and log-rank, Kruskal-Wallis, Mann-Whitney U, ANOVA, and chi-square tests applied (p = 0.05). RESULTS: Fracture loads after subsequent LL differed significantly (p = 0.001) between groups, while implants showed the highest values. Fmax median (min/max) were as follows: (I) 252 (204/542), (II) 293 (243/443), (III) 253 (183/371), (IV) 195 (140/274), and (V) 446 (370/539). Pair-wise comparison showed significant differences (p = 0.001) between group I/IV and group V, I, and IV (p = 0.045), II and IV (p = 0.001), and III compared to IV (p = 0.033), respectively. RCRR below 1 significantly increased load capability compared to RCRR = 1. CONCLUSIONS: OE appears to preferably ensure biomechanical stability of teeth that are endodontically treated and receive core-and-post and crown placement compared to SCL. AR has no adverse biomechanical impact. RCRR < 1 is biomechanically beneficial. CLINICAL RELEVANCE: For endodontically treated and restored teeth, orthodontic extrusion should be preferred compared to surgical crown lengthening prior single-crown restoration. As orthodontic extrusion, apical root resection has no adverse effect on load capability. Single-crown implant-borne restorations are most load capable.