Variations of microbiota in three types of typical military contaminated sites: Diversities, structures, influence factors, and co-occurrence patterns.

Contamination with energetic compounds (ECs) is common in military sites and poses a great risk to the environment and human health. However, its effects on the soil bacterial communities remain unclear. This study assessed the variations of bacterial communities, co-occurrence patterns, and their influence factors in three types of typical military-contaminated sites (artillery range, military-industrial site, and ammunition destruction site). The results showed that the most polluted sites were ammunition destruction sites, followed by military-industrial sites, whereas pollution in the artillery ranges was minimal. The average concentrations of ECs including 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in the study sites ranged 120-1.67 × 105, 20-7.20 × 104, and 180-2.38 × 105 µg/kg, respectively. Bacterial diversity and community structure in military-industrial and ammunition destruction sites were significantly changed, but not in artillery ranges. TNT, pH, and soil moisture are the critical factors affecting bacterial communities in contaminated military sites. Co-occurrence network analysis indicated that the pressure of ECs affected bacterial interactions and microbiota function. Our findings provide new insights into the variations in bacterial communities in EC-contaminated military sites and references for the bioremediation of ECs.

An Overview of Treatment Approaches for Octahydro-1, 3, 5, 7-tetranitro-1, 3, 5, 7-tetrazocine (HMX) Explosive in Soil, Groundwater, and Wastewater.

Octahydro-1, 3, 5, 7-tetranitro-1, 3, 5, 7-tetrazocine (HMX) is extensively exploited in the manufacturing of explosives; therefore, a significant level of HMX contamination can be encountered near explosive production plants. For instance, up to 12 ppm HMX concentrations have been observed in the wastewater effluent of a munitions manufacturing facility, while up to 45,000 mg/kg of HMX has been found in a soil sample taken from a location close to a high-explosive production site. Owing to their immense demand for a variety of applications, the large-scale production of explosives has culminated in severe environmental issues. Soil and water contaminated with HMX can pose a detrimental impact on flora and fauna and hence, remediation of HMX is paramount. There is a rising demand to establish a sustainable technology for HMX abatement. Physiochemical and bioremediation approaches have been employed to treat HMX in the soil, groundwater, and wastewater. It has been revealed that treatment methods such as photo-peroxidation and photo-Fenton oxidation can eliminate approximately 98% of HMX from wastewater. Fenton's reagents were found to be very effective at mineralizing HMX. In the photocatalytic degradation of HMX, approximately 59% TOC removal was achieved by using a TiO2 photocatalyst, and a dextrose co-substrate was used in a bioremediation approach to accomplish 98.5% HMX degradation under anaerobic conditions. However, each technology has some pros and cons which need to be taken into consideration when choosing an HMX remediation approach. In this review, various physiochemical and bioremediation approaches are considered and the mechanism of HMX degradation is discussed. Further, the advantages and disadvantages of the technologies are also discussed along with the challenges of HMX treatment technologies, thus giving an overview of the HMX remediation strategies.

Uncovering the structure and function of specialist bacterial lineages in environments routinely exposed to explosives.

Environmental contamination by hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), the two most widely used compounds for military operations, is a long-standing problem at the manufacturing and decommissioning plants. Since explosives contamination has previously been shown to favour the growth of specific bacterial communities, the present study attempts to identify the specialist bacterial communities and their potential functional and metabolic roles by using amplicon targeted and whole-metagenome sequencing approaches in samples collected from two distinct explosives manufacturing sites. We hypothesize that the community structure and functional attributes of bacterial population are substantially altered by the concentration of explosives and physicochemical conditions. The results highlight the predominance of Planctomycetes in contrast to previous reports from similar habitats. The detailed phylogenetic analysis revealed the presence of operational taxonomic units related to bacterial members known for their explosives degradation. Further, the functional and metabolic analyses highlighted the abundance of putative genes and unidentified taxa possibly associated with xenobiotic biodegradation. Our findings suggest that microbial species capable of utilizing explosives as a carbon, energy or electron source are favoured by certain selective pressures based on the prevailing physicochemical and geographical conditions.

Comparison of Various Chromatographic Systems for Analysis of Cytisine in Human Serum, Saliva and Pharmaceutical Formulation by HPLC with Diode Array, Fluorescence or Mass Spectrometry Detection.

Background: Identification and quantitative determination of cytisine, especially in biological samples and pharmaceutical formulations, is still a difficult analytical task. Cytisine is an alkaloid with a small and very polar molecule. For this reason, it is very weakly retained on reversed phase (RP) stationary phases, such as commonly used alkyl-bonded phases. The very weak retention of cytisine causes it to be eluted together with the components of biological matrices. Objective: Comparison and evaluation of various chromatographic systems for analysis of cytisine in different matrices-serum, saliva and pharmaceutical formulation-by high performance liquid chromatography (HPLC) with diode array (DAD), fluorescence (FLD) and mass spectrometry (MS) detection. Methods: The analyses were performed using HPLC in reversed phase (RP), hydrophilic interaction liquid chromatography (HILIC) and ion exchange chromatography (IEC) modes. Different sample pre-treatment methods were tested: Protein precipitation (with acetone, methanol (MeOH) or acetonitrile (ACN), and solid phase extraction (SPE) using cartridges with octadecyl (C18), hydrophilic-lipophilic balanced copolymer (HLB) or strong cation exchange sorbents (Strata X-C). Conclusion: Significant differences were observed in retention parameters with a change of the used chromatographic system. The various properties of stationary phases resulted in differences in analyte retention, peaks' shape and systems' efficiency. The weakest retention was observed using RP systems; however, the use of the Polar RP phase can be an alternative for application in green chromatography. In the strongest retention was observed using a strong cation exchange (SCX) phase. The most optimal systems were chosen for the analysis of cytisine in the pharmaceutical preparation, serum and saliva after sample pre-treatment with the new SPE procedure. Due to the sensitivity, the use of HPLC-DAD or HPLC-FLD is the most optimal for drug analysis in pharmaceutical preparations, whereas HPLC-MS is suitable for analysis of cytisine in biological samples.

Monitoring of explosive residues in lake-bottom water using Polar Organic Chemical Integrative Sampler (POCIS) and chemcatcher: determination of transfer kinetics through Polyethersulfone (PES) membrane is crucial.

Between 1920 and 1967, approximatively 8200 tons of ammunition waste were dumped into some Swiss lakes. This study is part of the extensive historical and technical investigations performed since 1995 by Swiss authorities to provide a risk assessment. It aims to assess whether explosive monitoring by passive sampling is feasible in lake-bottom waters. Polar organic chemical integrative sampler (POCIS) and Chemcatcher were first calibrated in a channel system supplied with continuously refreshed lake water spiked with two nitroamines (HMX and RDX), one nitrate ester (PETN), and six nitroaromatics (including TNT). Exposure parameters were kept as close as possible to the ones expected at the bottom of two affected lakes. Sixteen POCIS and Chemcatcher were simultaneously deployed in the channel system and removed in duplicates at 8 different intervals over 21 days. Sorbents and polyethersulfone (PES) membranes were separately extracted and analyzed by UPLC-MS/MS. When possible, a three-compartment model was used to describe the uptake of compounds from water, over the PES membrane into the sorbent. Uptake of target compounds by sorbents was shown not to approach equilibrium during 21 days. However, nitroaromatics strongly accumulated in PES, thus delaying the transfer of these compounds to sorbents (lag-phase up to 9 days). Whereas sampling rate (RS) of nitroamines were in the range of 0.06-0.14 L day-1, RS of nitroaromatics were up to 10 times lower. As nitroaromatic accumulation in PES was integrative over 21 days, PES was used as receiving phase for these compounds. The samplers were then deployed at lake bottoms. To ensure that exposure conditions were similar between calibration and field experiments, low-density polyethylene strips spiked with performance reference compounds were co-deployed in both experiments and dissipation data were compared. Integrative concentrations of explosives measured in the lakes confirmed results obtained by previous studies based on grab sampling.

Spectral and photophysical properties of cytisine in acetonitrile - Theory and experiment.

Spectral and photophysical properties of (-)-cytisine that is used as a smoking cessation aid, and which derivatives are promising tools in a treatment of neurological diseases, were investigated in acetonitrile, non-specifically interacting solvent with a polarity similar to water. The two chair conformers of cytisine were found the most stable in the ground state S0 and the lowest excited singlet state S1(π,π*), wherein axial one was characterized by a significantly larger abundance, fluorescence lifetime 0.15 ns and fluorescence quantum yield 0.008. The S1(π,π*) excited state of both cytisine conformers deactivated almost exclusively via internal conversion.

Electrochemical Determination of TNT, DNT, RDX, and HMX with Gold Nanoparticles/Poly(Carbazole-Aniline) Film-Modified Glassy Carbon Sensor Electrodes Imprinted for Molecular Recognition of Nitroaromatics and Nitramines.

Since nitroaromatic- and nitramine-type energetic materials, mostly arising from military activities, are persistent pollutants in soil and groundwater, on-site sensing of these hazardous chemicals has gained importance. A novel electrochemical sensor was designed for detecting nitroaromatic- and nitramine-type energetic materials, relying on gold nanoparticles (Aunano), modified glassy carbon (GC) electrode coated with nitro-energetic memory-poly(carbazole-aniline) copolymer (Cz- co-ANI) film (e.g., TNT memory-GC/P(Cz- co-ANI)-Aunano modified electrode). Current was recorded against concentration to build the calibration curves that were found to be linear within the range of 100-1000 µg L-1 for 2,4,6-trinitrotoluene (TNT) and 2,4-dinitrotoluene (DNT): 50-1000 µg L-1 for 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). The corresponding limits of detection were 25 µg L-1 for TNT, 30 µg L-1 for DNT, and 10 µg L-1 for both RDX and HMX, using nitro-energetic memory-GC/P(Cz- co-ANI)-Aunano electrodes. These electrodes were used separately, and specific determinations were made in various mixtures of nitro-energetic materials. The developed method could be efficiently used in electroanalyzing nitroaromatics and nitramines in military explosives (i.e., comp B, octol, and comp A5). The sensor electrodes were specific for the tested nitro-energetic compounds and did not respond to paracetamol-caffeine-based analgesic drug, acetylsalicylic acid (aspirin), sweetener, and sugar that can be used as camouflage materials in passenger belongings. The developed method was statistically validated against the standard LC-MS reference method in contaminated clay soil samples containing TNT and RDX explosives.

Trace Detection of RDX, HMX and PETN Explosives Using a Fluorescence Spot Sensor.

1,3,5-trinitroperhydro-1,3,5-triazine (RDX), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), and pentaerythritol tetranitrate (PETN), the major components in plastic explosives, pose a significant threat to public safety. A quick, sensitive, and low-cost detection method for these non-volatile explosives is eagerly demanded. Here we present a fluo-spot approach, which can be employed for in situ detection of trace amount of explosives. The sensor molecule is a charge-transfer fluorophore, DCM, which is strongly fluorescent in its pristine state, but non-fluorescent after the quick reaction with NO2· (or NO2(+)) generated from the UV photolysis of RDX, HMX (or PETN). When fabricated within silica gel TLC plate, the fluo-spot sensor features high sensitivity owing to the large surface area and porous structure of the substrate. The sensor reaction mechanism was verified by various experimental characterizations, including chromatography, UV-Vis absorption and fluorescence spectroscopy, MS and (1)H NMR spectrometry. The fluo-spot also demonstrated high selectivity towards RDX, HMX and PETN, as no significant fluorescence quenching was observed for other chemical compounds including common nitro-aromatic explosives and inorganic oxidative compounds. The DCM sensor can also be used as an economical spray kit to directly spot the explosives by naked eyes, implying great potential for quick, low-cost trace explosives detection.

Detection of Explosives Using Differential Laser-Induced Perturbation Spectroscopy with a Raman-based Probe.

Explosives detection is carried out with a novel spectral analysis technique referred to as differential laser-induced perturbation spectroscopy (DLIPS) on thin films of TNT, RDX, HMX, and PETN. The utility of Raman spectroscopy for detection of explosives is enhanced by inducing deep ultraviolet laser perturbation on molecular structures in combination with a differential Raman sensing scheme. Principal components analysis (PCA) is used to quantify the DLIPS method as benchmarked against a traditional Raman scattering probe, and the related photo-induced effects on the molecular structure of the targeted explosives are discussed in detail. Finally, unique detection is observed with TNT samples deposited on commonly available background substrates of nylon and polyester. Overall, the data support DLIPS as a noninvasive method that is promising for screening explosives in real-world environments and backgrounds.

Alkaloid variation in New Zealand kowhai, Sophora species.

Alkaloid contents of leaf and seed samples of eight species of Sophora native to New Zealand, plus Sophora cassioides from Chile are reported. Fifty-six leaf and forty-two seed samples were analysed for alkaloid content by proton nuclear magnetic resonance spectroscopy, which showed major alkaloids as cytisine, N-methyl cytisine and matrine. GC analyses quantified these and identified further alkaloid components. The alkaloids identified were cytisine, sparteine, and matrine-types common to Sophora from other regions of the world. Cytisine, N-methyl cytisine, and matrine were generally the most abundant alkaloids across all species with seeds containing the highest concentrations of alkaloids. However, there was no clear taxonomic grouping based on alkaloid composition. A quantitative analysis of various parts of two Sophora microphylla trees showed that the seeds were the richest source of alkaloids (total 0.4-0.5% DM), followed by leaf and twig (0.1-0.3%) and then bark (0.04-0.06%), with only low amounts (<0.02%) found in the roots. This study represents the most comprehensive phytochemical investigation of New Zealand Sophora species to date and presents data for three species of Sophora for which no prior chemistry has been reported.

Precise determination of nonlinear function of ion mobility for explosives and drugs at high electric fields for microchip FAIMS.

High-field asymmetric waveform ion mobility spectrometry (FAIMS) separates ions by utilizing the characteristics of nonlinear ion mobility at high and low electric fields. Accurate ion discrimination depends on the precise solution of nonlinear relationships and is essential for accurate identification of ion species for applications. So far, all the nonlinear relationships of ion mobility obtained are based at low electric fields (E/N <65 Td). Microchip FAIMS (µ-FAIMS) with small dimensions has high electric field up to E/N = 250 Td, making the approximation methods and conclusions for nonlinear relationships inappropriate for these systems. In this paper, we deduced nonlinear functions based on the first principle and a general model. Furthermore we considered the hydrodynamics of gas flow through microchannels. We then calculated the specific alpha coefficients for cocaine, morphine, HMX, TNT and RDX, respectively, based on their FAIMS spectra measured by µ-FAIMS system at ultra-high fields up to 250 Td. The results show that there is no difference in nonlinear alpha functions obtained by the approximation and new method at low field (<120 Td), but the error induced by using approximation method increases monotonically with the increase in field, and could be as much as 30% at a field of 250 Td.

Micro-solid-phase extraction coupled to desorption electrospray ionization-high-resolution mass spectrometry for the analysis of explosives in soil.

Home-made micro-solid-phase extraction (SPE) cartridges using different adsorbent materials were tested for the desorption electrospray ionization-high-resolution mass spectrometry (DESI-HRMS) determination of explosives like 2,4,6-trinitrotoluene, cyclotrimethylene-trinitramine, cyclotetramethylene-tetranitramine, pentaerythritol tetranitrate, and trinitrophenylmethylnitramine in soil samples. Quantitation limits in the low nanogram per kilogram range proved the reliability of the method for the detection of explosives at ultra-trace levels. The reduced sample preparation allowed for low costs and high-throughput analyses. Finally, the superior extraction capability of the method was proved by obtaining DESI-HRMS responses at least five times higher than those achieved by performing DESI-HRMS analyses of solid-liquid extracts spotted onto commercial polytetrafluoroethylene slides.

Enantiomeric separation of functionalized ethano-bridged Tröger bases using macrocyclic cyclofructan and cyclodextrin chiral selectors in high-performance liquid chromatography and capillary electrophoresis with application of principal component analysis.

The enantiomeric separation of a series of racemic functionalized ethano-bridged Tröger base compounds was examined by high performance liquid chromatography (HPLC) and capillary electrophoresis (CE). Using HPLC and CE the entire set of 14 derivatives was separated by chiral stationary phases (CSPs) and chiral additives composed of cyclodextrin (native and derivatized) and cyclofructan (derivatized). Baseline separations (Rs≥1.5) in HPLC were achieved for 13 of the 14 compounds with resolution values as high as 5.0. CE produced 2 baseline separations. The separations on the cyclodextrin CSPs showed optimum results in the reversed phase mode, and the LARIHC™ cyclofructan CSPs separations showed optimum results in the normal phase mode. HPLC separation data of the compounds was analyzed using principal component analysis (PCA). The PCA biplot analysis showed that retention is governed by the size of the R1 substituent in the case of derivatized cyclofructan and cyclodextrin CSPs, and enantiomeric resolution closely correlated with the size of the R2 group in the case of non-derivatized γ-cyclodextrin CSP. It is clearly shown that chromatographic retention is necessary but not sufficient for the enantiomeric separations of these compounds.

Analysis of explosives using corona discharge ionization combined with ion mobility spectrometry-mass spectrometry.

Corona discharge ionization combined with ion mobility spectrometry-mass spectrometry (IMS-MS) was utilized to investigate five common explosives: cyclonite (RDX), trinitrotoluene (TNT), pentaerythritol tetranitrate (PETN), cyclotetramethylenetetranitramine (HMX), and 2,4-dinitrotoluene (DNT). The MS scan and the selected ion IMS analyses confirmed the identities of the existing ion species and their drift times. The ions observed were RDX·NO3(-), TNT(-), PETN·NO3(-), HMX·NO3(-), and DNT(-), with average drift times of 6.93 ms, 10.20 ms, 9.15 ms, 12.24 ms, 11.30 ms, and 8.89 ms, respectively. The reduced ion mobility values, determined from a standard curve calculated by linear regression of (normalized drift times)(-1) versus literature K0 values, were 2.09, 1.38, 1.55, 1.15, 1.25, and 1.60 cm(2) V(-1) s(-1), respectively. The detection limits were found to be 0.1 ng for RDX, 10 ng for TNT, 0.5 ng for PETN, 5.0 ng for HMX, and 10 ng for DNT. Simplified chromatograms were observed when nitrogen, as opposed to air, was used as the drift gas, but the detection limits were approximately 10 times worse (i.e., less sensitivity of detection).

Incorporation and mineralization of TNT and other anthropogenic organics by natural microbial assemblages from a small, tropical estuary.

2,4,6-Trinitrotoluene (TNT) metabolism was compared across salinity transects in Kahana Bay, a small tropical estuary on Oahu, HI. In surface water, TNT incorporation rates (range: 3-121 µg C L(-1) d(-1)) were often 1-2 orders of magnitude higher than mineralization rates suggesting that it may serve as organic nitrogen for coastal microbial assemblages. These rates were often an order of magnitude more rapid than those for RDX and two orders more than HMX. During average or high stream flow, TNT incorporation was most rapid at the riverine end member and generally decreased with increasing salinity. This pattern was not seen during low flow periods. Although TNT metabolism was not correlated with heterotrophic growth rate, it may be related to metabolism of other aromatic compounds. With most TNT ring-carbon incorporation efficiencies at greater than 97%, production of new biomass appears to be a more significant product of microbial TNT metabolism than mineralization.

Solid-phase extraction using hierarchical organosilicates for enhanced detection of nitroenergetic targets.

A novel porous organosilicate material was evaluated for application as a solid phase extraction sorbent for preconcentration of nitroenergetic targets from aqueous solution prior to HPLC analysis. The performance of the sorbent in spiked deionized water, groundwater, and surface water was evaluated. Targets considered included 2,4,6-trinitrotoluene, 2,4-dinitrotoluene, RDX, HMX, and nitroglycerin. The sorbent was shown to provide improved performance over Sep-Pak RDX. The impact of complex matrices on target preconcentration by the sorbent was also found to be less dramatic than that observed for LiChrolut EN. The impact of changes in pH on target preconcentration was considered. Aqueous soil extracts generated from samples collected at sites of ordnance testing were also used to evaluate the materials. The results presented here demonstrate the potential of this novel sorbent for application as a solid phase extraction material for the preconcentration of nitroenergetic targets from aqueous solutions.

[Development of quantitative analyse method for determination of alkaloid cytisin in Spartium junceum L., growing in Georgia].

The aim of the research was to develop a method for quantitative determination of cytisine in Spartium junceum L. We used the above-ground parts of plants. In developing a method of analysis we used the method of 3-phase extraction. In this case the best results were obtained in the system: chopped raw material - water solution of ammonia - chloroform. In this case, the amount of alkaloids extracted almost entirely from the plant and goes into the chloroform phase. Evaluation of the results was carried out by the validation. The method for determination of cytisine in raw product was proposed. The method comprises the following steps-extraction of raw materials extracting chloroform phase and its evaporation, the translation of solids in methanol, the chromatographic separation cytisine and its fixation of the spectrophotometer method. The method is reproducible, has the required accuracy, is easy to analysis (less than 9 hours).

Investigating the fate of nitroaromatic (TNT) and nitramine (RDX and HMX) explosives in fractured and pristine soils.

Explosives compounds, known toxins, are loaded to soils on military training ranges predominantly during explosives detonation events that likely fracture soil particles. This study was conducted to investigate the fate of explosives compounds in aqueous slurries containing fractured and pristine soil particles. Three soils were crushed with a piston to emulate detonation-induced fracturing. X-ray diffraction, energy-dispersive X-ray spectrometry, gas adsorption surface area measurements, and scanning electron microscopy were used to quantify and image pristine and fractured soil particles. Aqueous batches were prepared by spiking soils with solutions containing 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), octahydro 1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), and 2,4-dinitrotoluene (2,4-DNT). Samples were collected over 92 d and the concentrations of the spiked explosives compounds and TNT transformation products 2-amino-4,6-dinitrotoluene (2ADNT) and 4-amino-2,6-dinitrotoluene (4ADNT) were measured. Our results suggest soil mineralogical and geochemical compositions were not changed during piston-induced fracturing but morphological differences were evident with fractured soils exhibiting more angular surfaces, more fine grained particles, and some microfracturing that is not visible in the pristine samples. TNT, 2,4-DNT, RDX, and HMX exhibited greater analyte loss over time in batch solutions containing fractured soil particles compared to their pristine counterparts. 2ADNT and 4ADNT exhibited greater concentrations in slurries containing pristine soils than in slurries containing fractured soils. Explosives compound transformation is greater in the presence of fractured soil particles than in the presence of pristine soil particles. Our results imply fractured soil particles promote explosive compound transformation and/or explosives compounds have a greater affinity for adsorption to fractured soil particle surfaces.

Bioassays for bomb-makers: proof of concept.

Clandestine bomb-makers are exposed to significant amounts of explosives and allied materials. As with any ingested xenobiotic substance, these compounds are subject to biotransformation. As such, the potential exists that characteristic suites of biomarkers may be produced and deposited in matrices that can be exploited for forensic and investigative purposes. However, before such assays can be developed, foundational data must be gathered regarding the toxicokinetics, fate, and transport of the resulting biomarkers within the body and in matrices such as urine, hair, nails, sweat, feces, and saliva. This report presents an in vitro method for simulation of human metabolic transformations using human liver microsomes and an assay applicable to representative nitro-explosives. Control and metabolized samples of TNT, RDX, HMX, and tetryl were analyzed using high-performance liquid chromatography coupled to tandem mass spectrometry (LC/MS/MS) and biomarkers identified for each. The challenges associated with this method arise from solubility issues and limitations imposed by instrumentation, specifically, modes of ionization.

Sequential biodegradation of TNT, RDX and HMX in a mixture.

We describe TNT's inhibition of RDX and HMX anaerobic degradation in contaminated soil containing indigenous microbial populations. Biodegradation of RDX or HMX alone was markedly faster than their degradation in a mixture with TNT, implying biodegradation inhibition by the latter. The delay caused by the presence of TNT continued even after its disappearance and was linked to the presence of its intermediate, tetranitroazoxytoluene. PCR-DGGE analysis of cultures derived from the soil indicated a clear reduction in microbial biomass and diversity with increasing TNT concentration. At high-TNT concentrations (30 and 90 mg/L), only a single band, related to Clostridium nitrophenolicum, was observed after 3 days of incubation. We propose that the mechanism of TNT inhibition involves a cytotoxic effect on the RDX- and HMX-degrading microbial population. TNT inhibition in the top active soil can therefore initiate rapid transport of RDX and HMX to the less active subsurface and groundwater.