Risk assessment of pesticides used in the eastern Avocado Belt of Michoacan, Mexico: A survey and water monitoring approach.

Pesticides use raises concerns regarding environmental sustainability, as pesticides are closely linked to the decline of biodiversity and adverse human health outcomes. This study proposed a holistic approach for assessing the potential risks posed by pesticides for human health and the environment in the eastern region of Michoacan, where extensive agricultural lands, especially corn and avocado fields, surround the Monarch Butterfly Biosphere Reserve. We used a combination of qualitative (semi-structured interviews) and quantitative (chemical analysis) data. Fifty-five interviews with smallholder farmers allowed us to identify pesticide types, quantities, frequencies, and application methods. A robust and precise analytical method based on solid-phase extraction and LC-MS/MS was developed and validated to quantify 21 different pesticides in 16 water samples (rivers, wells, runoff areas). We assessed environmental and human health risks based on the pesticides detected in the water samples and reported in the interviews. The interviews revealed the use of 28 active ingredients, including glyphosate (29 % of respondents), imidacloprid (27 %), and benomyl (24 %). The pesticide analysis showed the presence of 13 different pesticides and degradation products in the water samples. The highest concentrations were found for imidacloprid (1195 ngL-1) and carbendazim (a degradation product of benomyl; 932 ngL-1), along with the metabolite of pyrethroid insecticides, 3-PBA (494 ngL-1). The risk assessment indicates that among the most used pesticides, the fungicide benomyl and carbendazim pose the highest risk to human health and aquatic ecosystems, respectively. This study unveils novel insights on agricultural practices for the avocado, a globally consumed crop that is undergoing rapid production expansion. It calls for the harmonisation of crop protection with environmental responsibility, safeguarding the health of the people involved and the surrounding ecosystems.

The TOG protein Stu2 is regulated by acetylation.

Stu2 in S. cerevisiae is a member of the XMAP215/Dis1/CKAP5/ch-TOG family of MAPs and has multiple functions in controlling microtubules, including microtubule polymerization, microtubule depolymerization, linking chromosomes to the kinetochore, and assembly of γ-TuSCs at the SPB. Whereas phosphorylation has been shown to be critical for Stu2 localization at the kinetochore, other regulatory mechanisms that control Stu2 function are still poorly understood. Here, we show that a novel form of Stu2 regulation occurs through the acetylation of three lysine residues at K252, K469, and K870, which are located in three distinct domains of Stu2. Alteration of acetylation through acetyl-mimetic and acetyl-blocking mutations did not impact the essential function of Stu2. Instead, these mutations lead to a decrease in chromosome stability, as well as changes in resistance to the microtubule depolymerization drug, benomyl. In agreement with our in silico modeling, several acetylation-mimetic mutants displayed increased interactions with γ-tubulin. Taken together, these data suggest that Stu2 acetylation can govern multiple Stu2 functions, including chromosome stability and interactions at the SPB.

Molecularly imprinted polymers for the detection of benomyl residues in water and soil samples.

Benomyl is a benzimidazol fungicide used against various crop pathogens. Although banned in many countries, it is still widely used worldwide and is listed in different monitoring programs among the substances to be monitored to assess human exposure to pesticide residues. The assessment of benomyl is mainly based on the analysis of the residues of its most important metabolite, carbendazim. Existing methods often lack of selectivity and display a limited performance because of the presence of co-extracted compounds. Molecularly imprinted polymers (MIPs) offer an alternative methodology, adsorbing preferentially those target molecules for which the polymers are specifically prepared. In this study, we optimized the synthesis of a polymer imprinted with benomyl. Tests of specificity recognition showed a good performance for carbendazim compared with other similar pesticides. The mean recovery of benomyl (measured as carbendazim) from water samples was estimated to be 90% for MIPs while with real soil samples collected in Morocco the recovery efficiency was 62%. Preliminary tests also suggest that this MIP can implement traditional SPE techniques for assessing benomyl residual concentrations in environmental samples.

One-Step Fabrication of a Multifunctional Magnetic Nickel Ferrite/Multi-walled Carbon Nanotubes Nanohybrid-Modified Electrode for the Determination of Benomyl in Food.

Benomyl, as one kind of agricultural pesticide, has adverse impact on human health and the environment. It is urgent to develop effective and rapid methods for quantitative determination of benomyl. A simple and sensitive electroanalytical method for determination of benomyl using a magnetic nickel ferrite (NiFe2O4)/multi-walled carbon nanotubes (MWCNTs) nanohybrid-modified glassy carbon electrode (GCE) was presented. The electrocatalytic properties and electroanalysis of benomyl on the modified electrode were investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). In the phosphate-buffered saline (PBS) of pH 6.0, this constructed biosensor exhibited two linear relationships with the benomyl concentration range from 1.00 × 10(-7) to 5.00 × 10(-7) mol/L and from 5.00 × 10(-7) to 1.00 × 10(-5) mol/L, respectively. The detection limit was 2.51 × 10(-8) mol/L (S/N = 3). Moreover, the proposed method was successfully applied to determine benomyl in real samples with satisfactory results. The NiFe2O4/MWCNTs/GCE showed good reproducibility and stability, excellent catalytic activity, and anti-interference.

Electro-oxidation and determination of benomyl by square-wave adsorptive stripping voltammetry.

The electro-oxidation of the benomyl fungicide was studied by square-wave adsorptive stripping voltammetry. The voltammetric current at a glassy carbon electrode was acquired within the pH range 1.0-10.0. The quantitation was performed using the peak generated at +1144 mV by scanning the potential from +0.00 to +1600 mV (versus an Ag/AgCI reference electrode, 3 M NaCl). Accumulation potential = 0.0 mV, accumulation time=45 s, frequency=75 Hz, pulse amplitude=-60 mV, and staircase step potential = 7 mV were used as square-wave parameters. The peak current versus concentrations plot were rectilinear over the range from 0.081 to 1.496 microg/mL with an LOD of 0.024 microg/mL. Mean recovery was 99.0% (0.198 +/- 0.011 microg/mL), which was very close to the benomyl content spiked into river water (0.20 microg/mL). The method was efficiently applied for benomyl determination in the pesticide formulation Minelate 50WG, and the average determined content of 49.8 +/- 0.16 (n = 5) was consistent with the 50% benomyl (w/w) quoted by the manufacturer. The benomyl voltammograms recorded between days exhibited a negligible degradation into carbendazim metabolite, and therefore all results were given as the total benomyl concentration. The high recoveries and low RSD gave evidence of good accuracy and precision.

Effects of ozone microbubble treatment on removal of residual pesticides and quality of persimmon leaves.

This study investigated the effects of ozone microbubble (OMCB) treatment on the removal of residual fenitrothion (FT) and benomyl pesticides from red and green persimmon leaves, and also the treatment effect on the leaf colours, physical properties and flavour. The continuous bubbling OMCB treatment was more effective than the non-bubbling OMCB treatments at reducing the FT and benomyl agricultural pesticide residues from both the red and green persimmon leaves. Moreover, the bubbling OMCB treatment had no effect on the colour and pulling strength of the leaves. These results indicate that the treatment by bubbling OMCB is an extremely effective method for removing the residues of FT and benomyl in persimmon leaves and has relatively little effect on leaf quality characteristics.

Determination of carbendazim, thiophanate, thiophanate-methyl and benomyl residues in agricultural products by liquid chromatography-tandem mass spectrometry.

A simple and reliable liquid chromatographic-tandem mass spectrometric (LC-MS/MS) method was developed for carbendazim (MBC), thiophanate (TE), thiophanate-methyl (TM) and benomyl (BM) in agricultural products. These compounds were extracted from agricultural products with methanol after addition of sodium L-ascorbate. BM was hydrolyzed to MBC during the extraction with methanol. TE and TM were cyclized to ethyl 2-benzimidazole carbamate (EBC) and MBC by refluxing at 120 °C for 30 min with copper acetate in 50% acetic acid. MBC and EBC were cleaned up by an n-hexane wash and extraction with ethyl acetate and determined by LC-MS/MS. The mean recoveries from 10 agricultural products were in the range of 75.8-100.0%, and the relative standard deviations of 5 experiments were in the range of 1.5-9.2% at concentrations equal to the maximum residue limits (MRLs). The calibration curves were made by using commercial MBC and EBC as reference analytical standards without refluxing. The quantification limits were 0.01 mg/kg (as MBC), which is the uniform limit in the positive list system for agricultural chemical residues in foods in Japan.

Liquid chromatographic determination of benomyl in water samples after dispersive liquid-liquid microextraction.

A dispersive liquid-liquid microextraction (DLLME) method combined with solvolysis reaction for extraction of the carbamate fungicide benomyl as carbendazim from water samples is described. The method is based on the extraction of benomyl from acidified sample solution and its conversion into carbendazim via solvolysis reaction with DMF as organic solvent. The proposed DLLME method was followed by HPLC with fluorimetric detection for determination of benomyl. The proposed method has good linearity (0.998) with wide linear dynamic range (0.01-25 mg/L) and low detection limit (0.0033 mg/L), making it suitable for benomyl determination in water samples.

Fungicide resistance and genetic variability in plant pathogenic strains of Guignardia citricarpa / Resistência a fungicidas e variabilidade genética em linhagens patogênicas de plantas Guignardiacitricarpa

Citrus black spot (CBS) is a plant disease of worldwide occurrence, affecting crops in Africa, Oceania, and South America. In Brazil, climate provides favorable conditions and CBS has spread to the Southeast and South regions. CBS is caused by the fungus Guignardia citricarpa (anamorph: Phyllosticta citricarpa) and its control is based on the use of fungicides, such as benzimidazoles. In South Africa, the disease was kept under control for 10 years with benomyl, until cases of resistance to high concentrations of this fungicide were reported from all citrus-producing areas. Azoxystrobin (a strobilurin) has been found effective in controlling phytopathogens, including CBS, in a wide range of economically important crops. The present study investigated in vitro the effects of the fungicides benomyl and azoxystrobin on 10 strains of G. citricarpa isolated from lesions in citrus plants from Brazil and South Africa. Benomyl at 0.5 µg/mL inhibited mycelial growth in all strains except PC3C, of African origin, which exhibited resistance to concentrations of up to 100.0 µg/mL. The spontaneous mutation frequency for resistance to benomyl was 1.25 ï 10-7. Azoxystrobin, even at high concentrations, did not inhibit mycelial growth in any of the strains, but significantly reduced sporulation rates, by as much as 100%, at a concentration of 5.0 µg/mL. Variations in sensitivity across strains, particularly to the strobilurin azoxystrobin, are possibly related to genetic variability in G. citricarpa isolates.

A Mancha Preta dos Citros (MPC) tem ocorrência mundial afetando a produção de citros na África, Oceania e América do Sul. No Brasil, onde o clima é favorável ao seu desenvolvimento, a doença está espalhada nas regiões Sul e Sudeste. O controle da MPC, causada pelo fungo Guignardia citricarpa (anamorfo: Phyllosticta citricarpa) é baseado na aplicação de fungicidas, como os benzimidazóis. Na África do Sul, após 10 anos de controle da doença com o fungicida benomil, os casos de resistência a altas concentrações deste fungicida atingiram todas as áreas produtoras. O fungicida estrolilurina chamado azoxistrobina tem se mostrado eficiente no controle dos fitopatógenos de uma grande variedade de culturas economicamente importantes, incluindo a MPC. Neste trabalho foram investigados os efeitos in vitro dos fungicidas benomil e azoxistrobina em 10 linhagens de G. citricarpa isoladas de lesões em plantas cítricas no Brasil e na África do Sul. Houve inibição do crescimento micelial a 0,5 µg/mL do fungicida benomil entre as linhagens testadas, com exceção de PC3C de origem sul-africana, que apresentou resistência até a concentração de 100,0 µg/mL de benomil. A freqüência de mutação espontânea para resistência ao benomil foi de 1,25 ï 10-7. A estrobilurina azoxistrobina, mesmo em altas concentrações, não inibiu o crescimento micelial dos isolados, entretanto reduziu significativamente a produção de esporos, chegando a 100% de inibição em concentrações de 5,0 µg/mL de azoxistrobina. A variação na sensibilidade das linhagens, principalmente com a estrobilurina azoxistrobina, possivelmente está relacionada com a variabilidade genética dos isolados de G. citricarpa.

Spectrofluorimetric determination of benzoimidazolic pesticides: effect of p-sulfonatocalix[6]arene and cyclodextrins.

The effect of the addition of a macrocyclic host (H) such as p-sulfonatocalix[6]arene (C6S), native and modified cyclodextrins (CDs), on the fluorescence of benzoimidazolic fungicides (P), like Benomyl (BY) and Carbendazim (CZ), has been studied. The fluorescence of BY in water at pH 1.000 and 25.0 degrees C was increased in the presence of C6S, alphaCD and hydroxypropyl-beta-CD (HPCD). The association constants determined by fluorescence enhancement showed weak interactions (K(A) approximately 10(1) to 10(2) M(-1)) between the fungicide with both CDs, whereas they were stronger with C6S (K(A) approximately 10(5) M(-1)). Molecular recognition of BY for C6S was mainly attributed to electrostatic interactions, and for CDs to the hydrophobic effect and hydrogen bond formation. On the other hand, the fluorescent behaviour of CZ in the presence of C6S at pH 6.994 was interpreted as the formation of two complexes with 1:1 (P:H) and 1:2 (P:H(2)) stoichiometry, the latter being less fluorescent than the free analyte. Relative fluorescence quantum yield ratios between the complexed and free BY (phi(P:H)/phi(P)) were 2.00+/-0.05, 1.40+/-0.03 and 2.8+/-0.4 for C6S, alphaCD and HPCD, respectively. The analytical parameters improved in the presence of C6S and CDs. The best limit of detection (L(D), ng mL(-1)) was 17.4+/-0.8 with HPCD. The proposed method with C6S and HPCD was successfully applied to fortified samples of tap water and orange flesh extract with good recoveries (91-106%) and R.S.D. (< or = 2%) by triplicate analysis. The method is rapid, direct and simple and needs no previous degradation or derivatization reaction.

[Determination of benomyl, carbendazim and thiabendazole in apple juice concentrate using solid-phase extraction coupled with ion exchange chromatography].

A method was developed for the determination of benomyl, carbendazim and thiabendazole in apple juice concentrate by solid-phase extraction coupled with ion exchange chromatography (IEC). The sample was diluted with water, and then benomyl was degradated completely to carbendazim at 80 degrees C, and purified by an SCX solid-phase extraction column. Liquid chromatographic analysis was performed on the instrument of Agilent 1200 series equipped with a diode-array detector and autosampler. The column was LC-SCX (25 cm x 4.6 mm, 5 microm). The mobile phase was 0.1 mol/L KH2PO4 (pH 2.5)-acetonitrile (70:30, v/v) with a flow rate of 1.0 mL/min. The presented method showed good linear relationship with good precision and accuracy at the range of 0.02 - 2.0 mg/L for carbendazim and thiabendazole. The detection limits were 0. 004 mg/kg for carbendazim and thiabendazole. The method was characterized with acceptable sensitivity to meet the requirements for monitoring these pesticides in apple juice concentrate.

Nitrile glove permeation of benomyl.

The aim of this study was to investigate permeation of the fungicide benomyl at its highest field application concentration (0.70 mg/mL) in Benlate 50 WP aqueous solution (1.4 mg/mL) through two types of unsupported and unlined nitrile gloves--a disposable latex glove (Safeskin) and an industrial chemical-resistant glove (Solvex)--using an American Society for Testing and Materials (ATSM)-type permeation cell with isopropanol collection medium. The permeation cell was contained in a moving-tray water bath at 30.0 degrees C +/- 0.5 degrees C. The collection medium was evaporated and the residue derivatized with an optimized method (2,3,4,5,6-pentafluoro)benzyl bromide to form the disubstituted derivative of carbendazim (CARB), CARB.2PFB. The latter in isooctane was then quantified by gas chromatography- 63Ni-electron capture detection (GC-ECD) by the internal standard method. GC-ECD, GC-mass spectrometry (GC-MS), and reflectance infrared investigations showed that little degradation of benomyl occurred in the challenge solution of aqueous Benlate during an 8-hour exposure period. Benomyl was collected as a mixture of CARB and benomyl as shown by the presence of a diagnostic chromatographic peak identified by GC-MS. The amounts permeated during the same time period were always higher for Safeskin than for Solvex gloves, with the latter being approximately 18 times more protective than the former after 8 hours of continuous exposure. Although the Solvex gloves were safe to wear at least for 4 hours and for almost 8 hours, the ASTM breakthrough threshold was used as reference and thus ignored carcinogenic effects. Reflectance infrared investigations detected benomyl and CARB on the glove challenge surface after drying and confirmed that the cleaned glove surfaces after permeation experiments did not differ in infrared reflectance spectra from the corresponding surfaces just before the permeation experiments.

Flow-through fluorescence-based optosensor with on-line solid-phase separation for the simultaneous determination of a ternary pesticide mixture.

A rapid and selective method was developed for the simultaneous determination of 3 widely used pesticides, carbendazim (CBZ), carbofuran (CF), and benomyl (BNM). The method utilized a single continuous-flow, solid surface fluorometric multioptosensor implemented with a previous separation of the analytes on a minicolumn, placed just before the sensor, that was packed with the same solid support (C18 silica gel) as the flow-through cell. The separation was achieved because of the different kinetics of retention/elution of the pesticides on the solid support in the minicolumn, enabling the sequential arrival of the analytes at the sensing zone. With a single injection of the mixture, 2 of them were more strongly retained in the minicolumn (CF and BNM) while the other (CBZ) passed through the system towards the sensing material where it developed its fluorescence transitory signal. Then, CF and BNM were successively eluted from the solid support using 2 different eluting solutions, and they sequentially reached the sensing zone and developed their respective signals. A multiwavelength fluorescence detection mode was used, recording the signals of each pesticide at its maximum excitation/emission wavelength; therefore, the sensitivity was increased. The system was calibrated using a sample volume of 2000 microL. The linear dynamic range was 80-1400, 250-2400, and 150-2000 ng/mL with detection limits of 15, 68, and 35 ng/mL and relative standard deviation values of 3.5, 3.2, and 2.4% for CBZ, CF, and BNM, respectively. A recovery study was applied to spiked environmental water samples, and recoveries ranged from 96 to 104%.

Terrestrial avoidance behaviour tests as screening tool to assess soil contamination.

To assess soil quality and risk assessment, bioassays can be useful tools to gauge the potential toxicity of contaminants focusing on their bioavailable fraction. A rapid and sublethal avoidance behaviour test was used as a screening tool with the earthworm Eisenia andrei and the isopod Porcellionides pruinosus, where organisms were exposed during 48 h to several chemicals (lindane, dimethoate and copper sulphate, for isopods and carbendazim, benomyl, dimethoate and copper sulphate for earthworms). Both species were also exposed to soils from an abandoned mine. For all bioassays a statistical approach was used to derive EC50 values. Isopods and earthworms were able to perceive the presence of toxic compounds and escaping from contaminated to clean soil. Furthermore the behaviour parameter was equally or more sensitive then other sublethal parameters (e.g. reproduction or growth), expressing the advantages of Avoidance Behaviour Tests as screening tools in ERA.

Development of a single fluorescence-based optosensor for rapid simultaneous determination of fungicides benomyl and thiabendazole in waters and commercial formulations.

A novel, sensitive, and straightforward spectrofluorimetric flow injection method is proposed in this work for the resolution of a binary mixture of two widely used fungicides (thiabendazole and benomyl). The continuous flow methodology is based on the implementation of on-line solid phase extraction (SPE), preconcentration, and separation of both analytes on a surface of C(18) silica gel beads placed just in the flow cell, with solid surface fluorescence detection. A 45- and 25-fold sensitivity enhancement was obtained for benomyl and thiabendazole, respectively (in relation to the liquid phase measurements in the absence of solid support). The separation of the pesticides was performed because of the different retention-desorption kinetics in their interaction with the solid support, in the zone where the stream impinges the solid material. No previous separation of the analytes before they reach the flow cell is needed, simplifying extraordinarily both the procedure and the manifold. Using a sample volume of 3200 microL, the system was calibrated in the range of 0.4-20 and 20-400 ng x mL(-)(1) with detection limits of 0.06 and 3.6 ng x mL(-)(1) for thiabendazole and benomyl, respectively, and RSD values (n = 10) smaller than 0.8% for both analytes. The RSD values obtained replacing the solid support in each measurement were lower than 3%, and the day-to-day reproducibility RSD value was also lower than 5%. Sampling frequencies of 10 and 18 h(-)(1) were obtained with 600 and 3200 microL of sample volume. Recovery studies carried out on natural water samples spiked with known amounts of both analytes at concentration levels in the range of 1-10 and 25-200 ng x mL(-)(1) provided mean recovery percentages ranging from 98.8 to 102% and from 98 to 103% for thiabendazole and benomyl, respectively. The proposed methodology was also applied to pesticide formulations.

Comparison of solid-phase extraction and micro-solid-phase extraction for liquid chromatography/mass spectrometry analysis of pesticides in water samples.

Our recent on-line solid-phase extraction (SPE) device for micro-liquid chromatography, known as micro-solid-phase extraction (microSPE), was compared with traditional SPE for the analysis, from aqueous samples, of 4 pesticides belonging to different classes. Two different kinds of adsorbents, C18 and graphitized carbon black, were tested. A 2-stage ion trap mass spectrometer, equipped with homemade microflow electrospray ion (ESI) source, was used. Detection limits with a signal-to-noise ratio of 3:1 for both extraction methods were in the range of 0.1 microg/L for all compounds. However, better recoveries were obtained when microSPE traps were used.

Pesticide residues in products of plant origin in the European Union. Sampling strategy and results from the co-ordinated EU monitoring programmes in 1996 and 1997.

The results of a co-ordinated monitoring programme for pesticide residues in the European Union and Norway carried out in 1996 and 1997 are presented. The aim of this programme is to work towards a system, which makes it possible to estimate actual dietary pesticide intake for the population of the European Union. Based on a statistically dérived sampling plan and within the limited number of pesticides/commodities analysed, the most critical pesticides (benomyl group and dithiocarbamates) and commodities (mandarine and lettuce) were identified. In case of detected non-compliances, repeated sampling and, if necessary, enforcement actions are to be taken by national authorities. The programme will be continued in the next years.

Evaluation of residual levels of benomyl, methyl parathion, diuron, and vamidothion in pineapple pulp and bagasse (Smooth cayenne).

The objective of this research was to study the residual levels of benomyl, methyl parathion, diuron, and vamidothion in pineapple bagasse and pulp. Benomyl (benlate), methyl parathion (Folidol 600), diuron (Krovar), and Vamidothion (Kilval 300) were applied pre-harvest to pineapples (smooth cayenne). After harvesting, the fruits were washed (100 ppm sodium hypochlorite) and the pulp was separated from the sub-products (peel, core, tops, and tails). The pulp was not submitted to any heat treatment. The sub-products and the juice expressed from them, were submitted to a blanching process (95 degrees C for 1 min). After separating the juice, the bagasse and pulp were analyzed for residues of diuron and benomyl by high performance liquid chromatography, and for residues of vamidothion and methyl parathion by gas chromatography using a TSD detector. No residues of benomyl, diuron, vamidothion, or methyl parathion were detected in the pulp within the quantification limits of the methods (0.1 mg/kg, 0.1 mg/kg, 0.005 mg/kg, and 0.005 mg/kg, respectively). Only methyl parathion (0.052 mg/kg) and vamidothion (0.021 mg/kg) were detected in the bagasse. The presence of these residues in the bagasse was probably due to the action of the wax found in the peel, which prevented the methyl parathion and vamidothion from dissolving in the juice. According to these results, the pulp was fit for human consumption, as far as pesticide residues were concerned, and the bagasse was fit for animal feed and similar applications, because the residual levels found were below the limits established for these compounds.

Determination of benomyl, diphenyl, o-phenylphenol, thiabendazole, chlorpyrifos, methidathion, and methyl parathion in oranges by solid-phase extraction, liquid chromatography, and gas chromatography.

A simple and rapid method was developed for determination of benomyl, diphenyl (DP), o-phenylphenol (OPP), thiabendazole (TBZ), chlorpyrifos, methidathion, and methyl parathion in whole oranges. These compounds were extracted from a mixture of samples and anhydrous sodium acetate with ethyl acetate. The ethyl acetate extract was concentrated and cleaned up by passing through tandem solid-phase extraction columns consisting of anion-exchange and primary/secondary amine bonded silica. The eluate was concentrated and volume was adjusted with methanol for subsequent liquid chromatography (LC) and gas chromatography (GC). Benomyl (as methyl-2-benzimidazole carbamate, MBC), DP, OPP, and TBZ residues were determined by LC with fluorescence detection. Recoveries at 3 fortified levels (0.1, 1, and 10 micrograms/g) ranged from 63.9 to 97.4%, with coefficients of variation (CVs) of 1.6 to 15.5%. Limits of detection (LODs) were 0.01 microgram/g for DP, OPP, TBZ and 0.05 microgram/g for benomyl. Chlorpyrifos, methidathion, and methyl parathion residues were determined by GC with flame photometric detection. Recoveries ranged from 90.4 to 97.0%, with CVs of 2.1 to 5.9%. LODs were 0.005 microgram/g for chlorpyrifos and methyl parathion, and 0.01 microgram/g for methidathion.

Automated method for cleanup and determination of benomyl and thiabendazole in table-ready foods.

An automated solid-phase extraction (SPE) cleanup with on-line liquid chromatographic (LC) analysis was developed to determine residues of benomyl (as carbendazim) and thiabendazole in table-ready food items from the U.S. Food and Drug Administration Total Diet Study (TDS). A strong-cation-exchange cleanup of an acetone extract replaces the methylene chloride solvent partitioning steps in the procedure described in the Pesticide Analytical Manual (PAM). LC analysis is accomplished with a C8 analytical column and tandem fluorescence and UV detection. Recoveries of both analytes from 32 representative TDS foods fortified at 0.05 and 0.5 microgram/g were determined. Method precision was evaluated with triplicate recovery assays on 11 foods fortified at both levels. Accuracy was tested further by assaying 47 foods for incurred residues in parallel with the validated PAM procedure for comparison, and good agreement was found. The automated SPE method reduces solvent consumption, analysis time, and labor.