Solvent-free production of thermoplastic lignocellulose from wood pulp by reactive extrusion.

A novel acylation approach suited to rapid bulk thermoplasticization of lignocellulose without solvents was previously demonstrated by the authors in benchtop batch studies. The method relies upon a benzethonium chloride/sulfuric acid functionalizing agent at low concentrations to act as a wetting agent for the wood pulp, similar to an ionic liquid, yet binds to the lignocellulose ester as a flow aid in the final thermoplastic. The present investigation evaluates the approach in a residence time-limited (45-90 s) continuous twin-screw reactor, where intensive mixing and heat were found to yield high acylation. The modified lignocellulose exhibited desired thermoplasticity by being melt moldable without the need for plasticizers and maintained much of the excellent stiffness of cellulose, demonstrating a maximum flexural modulus of 5.4 GPa and tensile modulus of 1.8 GPa. The influence of extrusion conditions on thermoplasticity was examined by a Design of Experiments (DOE) analysis.

Syntheses of C2'-Fluorinated Analogs of Solamin.

The details of the total syntheses of C2'-fluorinated analogs of solamin, an antitumor annonaceous acetogenin, are described. Fluorine was enantioselectively introduced at the C2'-position by organocatalytic α-fluorination of the aldehyde according to a previously reported method. C2'-fluorinated solamin and its C2'-diastereomer were synthesized by the Sonogashira coupling of a tetrahydrofuran fragment and fluorine-containing γ-lactone fragments.

Drug repurposing approach to target FtsZ cell division protein from Salmonella Typhi.

Drug repurposing is an efficient alternative approach to counter the increasing drug-resistant pathogens to treat infectious diseases. FtsZ is an essential bacterial cytokinesis protein involved in the formation of cell-division complex and targeting FtsZ using FDA approved drugs is a promising strategy to identify and develop a new antibacterial drug. Using in silico pharmacophore-based screening of drug bank, molecular docking and molecular dynamics simulations, we identified six drugs inhibiting the function of stFtsZ from Salmonella Typhi. The selected drugs target stFtsZ at the hydrophobic cleft formed between the C-terminal domain and helix α7 with binding energy better than -8 kcal/mol. Out of these six drugs, benzethonium chloride showed promising results at 8 µM concentration where it inhibits stFtsZ GTPase activity by 80% and prevents polymerization. Benzethonium chloride also possesses an excellent antibacterial activity against the bacterial culture of Salmonella Typhi (ATCC 19430), Staphylococcus aureus (ATCC 43300) and Escherichia coli (ATCC 25922) with the MIC values of 8 µg/mL, 1 µg/mL and 12 µg/mL, respectively. Based on our current study, the scaffold of benzethonium chloride can be used for the development of broad-spectrum antibacterial agents against drug-resistant pathogens.

Identification and Characterization of Menadione and Benzethonium Chloride as Potential Treatments of Pierce's Disease of Grapevines.

Xylella fastidiosa infects a wide range of plant hosts and causes Pierce's disease (PD) of grapevines. The type 1 multidrug resistance (MDR) efflux system is essential for pathogenicity and survival of bacterial pathogens in planta. X. fastidiosa, with a single MDR system, is significantly more vulnerable to inhibition by small-molecule treatments than most bacterial pathogens that typically carry redundant MDR systems. A high-throughput cell viability assay using a green fluorescent protein-marked strain of X. fastidiosa Temecula 1 was developed to screen two Prestwick combinatorial small-molecule libraries of drugs and phytochemicals (1,600 chemicals in total) approved by the Food and Drug Administration and European Medicines Agency for cell growth inhibition. The screens revealed 215 chemicals that inhibited bacterial growth by >50% at 50 µM concentrations. Seven chemicals proved to lyse X. fastidiosa cells at 25 µM, including four phytochemicals. Menadione (2-methyl-1,4-naphthoquinone, vitamin K) from the phytochemical library and benzethonium chloride (a topical disinfectant) from the chemical library both showed significant bactericidal activity against X. fastidiosa. Both menadione and benzethonium chloride foliar spray (15 and 5 mM, respectively) and soil drench (5 and 25 mM, respectively) treatments were equally effective in reducing PD symptoms by 54 to 59% and revealed that the effects of both chemical treatments became systemic. However, menadione was phytotoxic when applied as a foliar spray at effective concentrations, causing significant loss of photosynthetic capacity.

Implication of foam sclerosant inactivation by human whole blood in a laboratory setting.

Background During sclerotherapy, it has been recommended to confirm intravenous placement of the needle by aspirating blood into the sclerosant syringe. This may inactivate some, or all of the sclerosant. Aims To quantify the volume of human blood needed to completely inactivate 1 ml of sodium tetradecyl sulphate, and comparing fresh blood and blood that has been stored in an ethylenediaminetetraacetic acid tube. Methods A series of manual titrations were carried out following a procedure developed at STD Pharmaceutical Products Ltd (Hereford, UK) and listed in the British Pharmacopeia. Three percent of sodium tetradecyl sulphate stock solutions were made with increasing volumes of blood and titrated against benzethonium chloride to determine the active concentration (% w/v) of sodium tetradecyl sulphate remaining in the solution. Results A calculated approximation showed 0.3 ml of blood is required to fully inactivate 1 ml of 3% sodium tetradecyl sulphate when made into a foam. A comparison was made between the use of fresh blood and blood stored in ethylenediaminetetraacetic acid tubes. Blood stored in ethylenediaminetetraacetic acid tubes showed more inactivation of sodium tetradecyl sulphate, but this was not significant at the P ≤ 0.05 level. Conclusion The data from our study have shown that a minimum of 0.3 ml of fresh blood is required to inactivate 1 ml of 3% sodium tetradecyl sulphate as a foam and it is not significantly affected by storing blood in an ethylenediaminetetraacetic acid tube. Our methodology suggests that during foam sclerotherapy treatment, blood should not be aspirated into the syringe to confirm position, and that ultrasound guidance is more appropriate for needle placement.

Glutaraldehyde collagen cross-linking stabilizes resin-dentin interfaces and reduces bond degradation.

This study evaluated the stability of resin-dentin interfaces treated with glutaraldehyde-containing agents, and assessed collagen degradation in dentin matrices treated with Gluma. Microtensile bond strength (µTBS) was evaluated 24 h and 6 months after treatment with three desensitizers (Gluma Desensitizer, Gluma Desensitizer Power Gel, and MicroPrime G) and two etch-and-rinse adhesives (Comfort Bond & Desensitizer and iBond TE). Demineralized beams of human dentin were treated with water or Gluma, and the degradation of collagen in these beams was assessed by quantification of the dry mass loss and of the amount of hydroxyproline released from hydrolyzed specimens after 1 or 4 wk. All groups demonstrated significant reduction in µTBS after 6 months, except for Gluma Desensitizer and iBond TE groups, which showed decreases of 7.2% and 10.8%, respectively. The most prevalent failure mode was 'mixed'. Significantly less hydroxyproline was released from Gluma-treated beams than from control beams after 4 wk. Beams treated with Gluma yielded significantly less dry mass loss than did beams in the control group. Collagen cross-linking with glutaraldehyde-containing agents may assist in the stabilization of resin-dentin bonds by reducing the amount of collagen solubilized from dental matrices in the hybrid layer. In turn, this may contribute to the preservation of adhesive interfaces.

Headspace gas chromatography based methodology for the analysis of aromatic substituted quaternary ammonium salts.

The analysis of quaternary ammonium salts (QAS) using GC is often performed by "in injector" pyrolysis to create volatile degradation products for quantification purposes. Besides the risk of severe system contamination, the application of this approach on aqueous samples is problematic. In this work, the sample is treated in a vial with 2,2-dimethoxypropane (DMP) under acidic catalysis. In addition to the removal of water and sample enrichment, the QAS are decomposed. As HS transfers only volatile compounds to the GC system, contamination is avoided. It was found that depending on the presence of benzyl, phenyl or methyl groups on the quaternary nitrogen; benzyl chloride, N,N-dimethylaniline or chloromethane are formed respectively in the sealed vial. All these can be used as an analytical target. A calibration curve for benzyl chloride could be derived from the pure compound. Chloromethane was generated from pure benzyldimethyldecylammonium chloride (BEDIDE), a pure QAS with benzyl and methyl groups, to construct a secondary calibration curve using a back analysis approach. It has been proven that by quantifying the formed analytical targets, the mass balance for the QAS under investigation was close to 100%. The presented procedure allows the quantification of any aromatic substituted QAS without the need for a matching reference, which is a major advantage over existing CE and LC methods The proposed methodology was validated for mouth sprays containing benzethonium chloride (BZTCl) or benzoxonium chloride (BZOCl) and for denatonium benzoate (DB) in ethylene glycol (EG) based cooling liquids. Results showed that the approach provided excellent linearity (R2≥0.999) and limits of detection around 0.01µg/vial for benzyl chloride. It was found that the reaction product of DMP and glycerol which was also present in the mouthspray and some cooling liquids, caused chromatographic interference with benzyl chloride. Treating those samples in the vial with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) after the enrichment step removes the interference and leaves a possible pathway for the simultaneous determination of glycerol in those samples.

Short Route to the Total Synthesis of Natural Muricadienin and Investigation of Its Cytotoxic Properties.

An original synthesis of the acetogenin muricadienin, the bioprecursor of solamin, has been developed. The key step in the five-step 41% overall yield synthesis is the catalytic cross-cyclomagnesiation reaction of functionally substituted 1,2-dienes with EtMgBr in the presence of Cp2TiCl2 and magnesium metal. It has been demonstrated for the first time that muricadienin exhibits a moderate in vitro inhibitory activity against topoisomerases I and IIα, key cell cycle enzymes. Using flow cytometry, muricadienin was shown to have high cytotoxicity toward the HEK293 kidney cancer cells (IC50 0.39 µM).

Co-delivery of chemosensitizing siRNA and an anticancer agent via multiple monocomplexation-induced hydrophobic association.

Synergistic combination of gene targeting and chemotherapy by co-delivering siRNA and anticancer drugs has widely been investigated to develop siRNA-based therapeutics for cancer treatment. Despite clinical potential of this approach, big challenges still remain such as delivery efficiency or stability/biocompatibility of the siRNA delivery system. Here we report a simple and biocompatible co-delivering formulation based on a unique complexation method, i.e., multiple monocomplexation-induced hydrophobic association between Bcl-2 targeting siRNA and a monocationic anticancer agent (benzethonium chloride, BZT). A colloidal formulation of the hydrophobically associated multiple monocomplex (HMplex) composed of siRNA, BZT and Pluronic F-68 was spontaneously constructed by physical mixing of the ternary constituents. In vitro and in vivo studies revealed that the ternary HMplex with a low charge ratio (N/P=4) possesses a tightly complexed stable nanostructure with Pluronic surface and small colloidal size less than 10nm, which allowed for 1) suitable protection of siRNA in serum-rich physiological environment, 2) efficient intracellular transfection into the cytoplasm, and 3) successful peritumoral co-delivery into the tumor tissue with dense interstitial matrix. Compared to non-targeting HMplexes between scrambled siRNA and BZT, Bcl-2 targeting HMplexes enhanced significantly both mRNA down-regulation by siRNA and apoptosis induction by BZT, and thus greatly suppressed the tumor volume when administered to highly aggressive and resistant human breast cancer xenografts (MDA-MB-231) in mice. These results elucidate that the co-complexed siRNA and BZT were liberated by intracellular decomplexation to trigger a synergistically combined therapeutic action. The successful siRNA/chemodrug co-delivery in vivo via peritumoral route and the greatly promoted therapeutic efficacy thereby represent the clinical potential of HMplexes for adjuvant locoregional cancer treatment by gene-targeted combination therapy.

[Formulation of benzethonium chloride into gels]. / Formulácia benzetóniumchloridu do gélov.

This study is focused on the preparation of gels with antimicrobial effects. A quaternary ammonium salt, benzethonium chloride, in a concentration of 0.01-0.5% (w/w) was employed as the drug. The humectant employed was propylene glycol in concentrations of 5% and 10% (w/w). Two types of polymers, chitosan and hydroxyethyl cellulose, in the same concentrations of 2.5% (w/w), were used for gel preparation. Finally the flow properties, rheological parameters and pH values of the gels were evaluated. Based on the obtained results, the samples of the gels prepared on the basis of chitosan and hydroxyethyl cellulose, which have the following optimum composition shown below, were found: 2,5% (w/w) CHIT + 0,5% (w/w) BZCl + 10% (w/w) PG; 2,5% (w/w) HEC + 0,5% (w/w) BZCl + 5% (w/w) PG.

A quantitative assessment method for Ascaris eggs on hands.

The importance of hands in the transmission of soil transmitted helminths, especially Ascaris and Trichuris infections, is under-researched. This is partly because of the absence of a reliable method to quantify the number of eggs on hands. Therefore, the aim of this study was to develop a method to assess the number of Ascaris eggs on hands and determine the egg recovery rate of the method. Under laboratory conditions, hands were seeded with a known number of Ascaris eggs, air dried and washed in a plastic bag retaining the washing water, in order to determine recovery rates of eggs for four different detergents (cationic [benzethonium chloride 0.1% and cetylpyridinium chloride CPC 0.1%], anionic [7X 1% - quadrafos, glycol ether, and dioctyl sulfoccinate sodium salt] and non-ionic [Tween80 0.1% -polyethylene glycol sorbitan monooleate]) and two egg detection methods (McMaster technique and FLOTAC). A modified concentration McMaster technique showed the highest egg recovery rate from bags. Two of the four diluted detergents (benzethonium chloride 0.1% and 7X 1%) also showed a higher egg recovery rate and were then compared with de-ionized water for recovery of helminth eggs from hands. The highest recovery rate (95.6%) was achieved with a hand rinse performed with 7X 1%. Washing hands with de-ionized water resulted in an egg recovery rate of 82.7%. This washing method performed with a low concentration of detergent offers potential for quantitative investigation of contamination of hands with Ascaris eggs and of their role in human infection. Follow-up studies are needed that validate the hand washing method under field conditions, e.g. including people of different age, lower levels of contamination and various levels of hand cleanliness.

Formulation design for target delivery of iron nanoparticles to TCE zones.

Nanoparticles of zero-valent iron (NZVI) are effective reducing agents for some dense non-aqueous phase liquid (DNAPL) contaminants such as trichloroethylene (TCE). However, target delivery of iron nanoparticles to DNAPL zones in the aquifer remains an elusive feature for NZVI technologies. This work discusses three strategies to deliver iron nanoparticles to DNAPL zones. To this end, iron oxide nanoparticles coated with oleate (OL) ions were used as stable analogs for NZVI. The OL-coated iron oxide nanoparticles are rendered lipophilic via (a) the addition of CaCl2, (b) acidification, or (c) the addition of a cationic surfactant, benzethonium chloride (BC). Mixtures of OL and BC show promise as a target delivery strategy due to the high stability of the nanoparticles in water, and their preferential partition into TCE in batch experiments. Column tests show that while the OL-BC coated iron oxide nanoparticles remain largely mobile in TCE-free columns, a large fraction of these particles are retained in TCE-contaminated columns, confirming the effectiveness of this target delivery strategy.

Synthesis, self-aggregation and biological properties of alkylphosphocholine and alkylphosphohomocholine derivatives of cetyltrimethylammonium bromide, cetylpyridinium bromide, benzalkonium bromide (C16) and benzethonium chloride.

A series of alkylphosphocholine and alkylphosphohomocholine derivatives of cetyltrimethylammonium bromide, cetylpyridinium bromide, benzalkonium bromide (C16) and benzethonium chloride have been synthesized. Their physicochemical properties were also investigated. The critical micelle concentration (cmc), the surface tension value at the cmc (γcmc), and the surface area at the surface saturation per head group (Acmc) were determined by means of surface tension measurements. The prepared compounds exhibit significant cytotoxic, antifungal and antiprotozoal activities. Alkylphosphocholines and alkylphosphohomocholines possess higher antifungal activity against Candida albicans in comparison with quaternary ammonium compounds in general. However, quaternary ammonium compounds exhibit significantly higher activity against human tumor cells and pathogenic free-living amoebae Acanthamoeba lugdunensis and Acanthamoeba quina compared to alkylphosphocholines. The relationship between structure, physicochemical properties and biological activity of the tested compounds is discussed.

Biocomposite films based on alginate and organically modified clay.

Sodium alginate/sodium montmorillonite hybrid films were prepared by casting from the suspension of sodium alginate and different clay samples. Clay samples had been modified with a cationic surfactant, a cationic polymer, and a small polar molecule, respectively. Benzethonium chloride, polyethyleneimine and urea were used as clay modifiers. The composite films begin to disintegrate at a higher temperature and with less weight loss than the pure alginate films. This suggests an enhancement of the film thermal stability due to the modification of the alginate with clay samples.

Magnetic "fishing" assay to screen small-molecule mixtures for modulators of protein-protein interactions.

Protein-protein interactions are an intricate part of biological pathways and have become important targets for drug discovery. Here we present a two-stage magnetic bead assay to functionally screen small-molecule mixtures for modulators of protein-based interactions, with simultaneous affinity-based isolation of active compounds and identification by mass spectrometry. Proteins of interest interact in solution prior to the addition of Ni(II)-functionalized magnetic beads to recover an intact protein-protein complex through affinity capture of a polyhistidine-tagged primary target ("protein-complex fishing"). Protein-complex fishing, utilizing His(6)-tagged calmodulin (CaM) as the primary (bait) protein and melittin (Mel) as the target, was used to screen a mass-encoded library of 1000 bioactive compounds (50 mixtures, 20 compounds each) and successfully identified three known antagonists, three naturally occurring phenolic compounds previously reported to disrupt CaM-activated phosphodiesterase activity, and two newly identified modulators of the CaM-Mel interaction, methylbenzethonium and pempidine tartrate. The ability to produce quantitative inhibition data is also shown through the development of dose-dependent response curves and the determination of inhibition constants (K(I)) for the novel compound methylbenzethonium (K(I) = 14-49 nM) and two known antagonists, calmidazolium (K(I) = 1.7-7.5 nM) and trifluoperazine (K(I) = 1.2-3.0 µM), with the latter two values being in close agreement with literature values.

A facile synthesis of highly water-soluble, core-shell organo-silica nanoparticles with controllable size via sol-gel process.

A series of highly water-soluble organo-silica nanoparticles, ranging from 2 to 10nm in diameter, were synthesized by the cohydrolysis and copolycondensation reactions. omega-methoxy(polyethyleneoxy)propyltrimethoxysilane (PEG6-9) and hydroxymethyltriethoxysilane (HMTEOS) mixtures were catalyzed by sodium hydroxide in the presence of surfactant benzethonium chloride (BTC) with various ratios of PEG6-9/HMTEOS at room temperature. The synthesized organo-silica nanoparticles possess a core-shell structure with a core of organo-silica resulting from HMTEOS and a monolayer shell of PEG6-9. The chemo-physical characteristics of the particles were studied by gel permeation chromatography (GPC), Fourier transform infrared (FTIR) spectroscopy, (29)Si nuclear magnetic resonance (NMR), dynamic light scattering (DLS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The molecular weight and particle size of the particles increased with increasing HMTEOS molar ratios. The richest HMTEOS composition for the water-soluble particles was found to be HMTEOS:PEG6-9=80:20, where the particles had a 6nm diameter core and a 0.8nm thick shell. We propose that these water-soluble organo-silica nanoparticles will be suitable for biomedical applications.

Synthesis of annonaceous acetogenins from muricatacin.

Synthetic studies of annonaceous acetogenins starting from (-)-muricatacin (1a) or (+)-muricatacin are described, involving (-)-muricatacin (1a), mono-THF acetogenin, solamin (2), reticulatacin (3), (15R, 16R, 19S, 20S)-cis-solamin (4a) and (15S, 16S, 19R, 20R)-cis-solamin (4b), non-adjacent bis-THF acetogenin, 4-deoxygigantecin (5), and epoxide-bearing acetogenin, (15S, 16R, 19S, 20R)-diepomuricanin (6a).

Displacement chromatography of proteins on hydrophobic charge induction adsorbent column.

Displacement chromatography of protein mixtures is proposed on hydrophobic charge induction chromatography (HCIC). We have used an HCIC medium, MEP-Hypercel as the stationary phase and a quaternary ammonium salt, benzethonium chloride, as the displacer. It was found that the multiple interactions between proteins/displacer and the HCIC sorbent, i.e. hydrophobic interaction and charge repulsion, enabled a greater flexibility for the design of displacement processes and ease of column regeneration by adjustment of pH. The capacity factors of proteins and displacers were used to predict their performances in column displacement, and the experimental results agreed well with the prediction. An isotachic displacement train of lysozyme and alpha-chymotrypsinogen A was formed with benzethonium chloride as the displacer at pH 5.0 with good yields and purities of the two proteins. Column regeneration was efficiently achieved by charge repulsion between the displacer and the adsorbent at lower pH values (pH 3 and 4). The results indicate that the displacement chromatography on HCIC is a good alternative to traditional hydrophobic displacement chromatography.

Adverse effects by artificial grapefruit seed extract products in patients on warfarin therapy.

OBJECTIVE: Grapefruit seed extract (GSE) is promoted as a natural product with antibacterial and antiviral properties. The aim of this study was to investigate the composition of some commercially available GSE products and evaluate their effect in vitro on two cytochrome P450 enzymes, CYP2C9 and CYP3A4. METHODS: A couple on lifelong treatment with warfarin and continuous regular follow-ups took some drops of a GSE product for 3 days. The female patient experienced a minor subcutaneous haematoma 3 days later, and her international normalised ratio (INR) value was 7.9. This was reported to the Swedish Medical Products Agency (MPA) as a spontaneous post-marketing report concerning adverse drug reactions/interactions. The composition of the GSE products was determined by proton and carbon-13 nuclear magnetic resonance spectroscopy (NMR). The inhibitory effect of the GSE products on the cytochrome P450 enzymes was tested in an in vitro baculosome assay. RESULTS: The NMR analysis showed that all three investigated GSE products contained the synthetic preservative benzethonium chloride (BTC) in addition to glycerol and water. No authentic GSE extract was found in any of the three GSE products analysed. Furthermore, BTC was found to be a potent inhibitor of CYP3A4 and CYP2C9 activity in vitro. CONCLUSION: Our results suggest that BTC in the GSE products is responsible for the increase in the INR value in a patient on warfarin treatment.