Dual-ROS-scavenging and dual-lingering nanozyme-based eye drops alleviate dry eye disease.

Efficiently removing excess reactive oxygen species (ROS) generated by various factors on the ocular surface is a promising strategy for preventing the development of dry eye disease (DED). The currently available eye drops for DED treatment are palliative, short-lived and frequently administered due to the short precorneal residence time. Here, we developed nanozyme-based eye drops for DED by exploiting borate-mediated dynamic covalent complexation between n-FeZIF-8 nanozymes (n-Z(Fe)) and poly(vinyl alcohol) (PVA) to overcome these problems. The resultant formulation (PBnZ), which has dual-ROS scavenging abilities and prolonged corneal retention can effectively reduce oxidative stress, thereby providing an excellent preventive effect to alleviate DED. In vitro and in vivo experiments revealed that PBnZ could eliminate excess ROS through both its multienzyme-like activity and the ROS-scavenging activity of borate bonds. The positively charged nanozyme-based eye drops displayed a longer precorneal residence time due to physical adhesion and the dynamic borate bonds between phenyboronic acid and PVA or o-diol with mucin. The in vivo results showed that eye drops could effectively alleviate DED. These dual-function PBnZ nanozyme-based eye drops can provide insights into the development of novel treatment strategies for DED and other ROS-mediated inflammatory diseases and a rationale for the application of nanomaterials in clinical settings.

Structural and thermoluminescence properties of lithium borate glass matrices under UV and beta radiation.

In the present work, glass samples in the (100 - x)B2O3-xLi2O binary system, with x varying from 30 to 50 mol%, were prepared using the conventional melting and moulding method, with the main objective of evaluating the thermoluminescence response when exposing these materials to ultraviolet (UV) radiation. Complementary analysis based on density, optical absorption on the UV-visible region (UV-vis absorbance), Fourier transform infrared spectroscopy on the medium region, X-ray diffraction, and differential thermal analysis measurements were performed. Thermoluminescence measurements of vitreous samples showed glow curves with at least one peak with a maximum temperature of ~170°C after exposure to UV radiation in the temperature range 50-250°C. Samples were also exposed to beta radiation in the temperature range 25-275°C, also showing single peaks with a maximum temperature of ~150°C.

A nanocomposite hydrogel loaded with Ag nanoparticles reduced by aloe vera polysaccharides as an antimicrobial multifunctional sensor.

Developing high-performance hydrogels with anti-freeze, and antimicrobial properties is crucial for the practical application of flexible sensors. In this study, we prepared silver nanoparticles (AgNPs) with aloe polysaccharide (AP) as a reducing agent. Then, the AP/AgNPs were added to a system of polyvinyl alcohol and borax crosslinked in water/glycerol to obtain a multifunctional conductive hydrogel. The incorporated AgNPs improved the conductivity (0.39 S/m) and mechanical properties (elongation at break: 732.9 %, fracture strength: 1267.6 kPa) of the hydrogel. In addition, resultant hydrogel exhibited potential for sensing strain, temperature, and humidity. When used as a strain sensor, the hydrogel system exhibited low detection limit (0.1 %), and fast response (0.08 s). The resistance of the hydrogel decreased with an increase in the absorbed moisture content, enabling humidity detection (25-95 %) to monitor breathing status. As a temperature sensor, the hydrogel supported a wide detection range (-50 to +90 °C) and sensitivity (-30-0 °C, temperature coefficient of resistance (TCR) = -5.64 %/°C) to detect changes in the ambient temperature. This study proposes a simple method for manufacturing multifunctional hydrogel sensors, which broadens their application prospects in wearable sensing and electronic products.

Natural flavonols as probes for direct determination of borax: From conventional fluorescence analysis to paper-based smartphone sensing.

Borax is strictly regulated in the food processing and pharmaceutical industry due to its physiological toxicity, and the development of a direct analytical method is essential for effectively monitoring the borax abuse. In this work, the fluorescence properties of flavonoids, including flavones, isoflavones and flavonols, were systematically investigated from aqueous to borax solutions, and it was found that the weak intrinsic fluorescence of flavonols could be pervasively sensitized by borax. A natural flavonol, morin, was subsequently chosen as a representative probe to develop a turn-on fluorescence sensing method for borax analysis, which achieved a linear response spanning four orders of magnitude with a detection limit of 1.07 µM (0.22 µg mL-1 in terms of Na2B4O7 content). Furthermore, a smartphone-assisted paper-based test device was designed and constructed by 3D printing technology. Using morin-impregnated test strips as the carrier, the borax could be visually detected by the RGB signals of the captured images, with a detection limit of 0.13 mM (27.05 µg mL-1 for Na2B4O7). Combining ion exchange treatment for food samples and sodium periodate oxidation for drug samples, the developed methods were successfully applied for the direct analysis of borax in various products with the recoveries of 86.9-106.3% for traditional fluorescence analysis and 82.7-108.8% for smartphone-assisted fluorescence sensing. The fluorescence property of the morin-borax system was studied using time-dependent density functional theory, and the sensing mechanism was discussed in conjunction with experimental research.

Electrochemical screening of selected ß-blockers at a polarized liquid-liquid interface.

This paper describes the electrochemical behavior of five ß-blockers at the polarized liquid-liquid interface formed between aqueous solution (sodium chloride solution or Britton-Robinson buffers) and bis(triphenylphosphoranylidene)ammonium tetrakis(4-chlorophenyl)borate (BTPPATPBCl) dissolved in 1,2-dichloroethane (the organic phase). All measurements reported in this work were conducted using cyclic voltammetry (CV). The effects of the concentration of analytes, the pH of the aqueous phase, and applied electrochemical parameters on the analytical performance of the studied system are studied and discussed. The linear dynamic ranges (LDRs) of the studied ß-blockers were in the range of 5-200 µmol L-1 and the lowest limit of detection (LOD) value was determined for pindolol (LOD = 1.96 µM µmol L-1). The highest LOD value was 4.96 µmol L-1 found for nebivolol. In addition, physicochemical parameters such as the formal Galvani potential difference (Δaqorgϕ), formal Gibbs free energies of the ion transfer reaction (ΔaqorgG') and partition coefficients (log P'aq/org) for all studied molecules were determined. The latter were compared and correlated with the available literature values of log Poctanol. Finally, a standard addition method was used to determine the concentration of nebivolol in pharmaceutical preparations using a platform based on the electrified liquid-liquid interface.

Impact of production methods on properties of natural rosin added polylactic acid/sodium pentaborate and polylactic acid/calcium carbonate films.

Nowadays biopolymers play an important role in packaging materials due to their protection properties against physical and chemical degradation or mechanical resistance. In this study, sodium pentaborate anhydride (B5NaO8), eggshell (CaCO3) nanoparticles, and natural rosin additives were introduced to pure PLA to produce a biofilm protecting from UV rays. The impact of the preparation method of hybrid biocomposite films was carried out based on the polymer casting method and using in the first case only magnetic mixing whereas magnetic mixing coupled with ultrasonic homogenizer was used in the second case. All biocomposite films were obtained for a nanoparticle content fixed at 7.5 wt% and various rosin rates (1, 5, 10, and 40 wt%). This study aims to expand the UV protection zone in PLA films. The thermal and mechanical properties, transmittance of UV-visible rays, microstructure analysis, and contact angle values were evaluated to detect the effect of the preparation method on the final properties. The results showed that the homogeneous distribution of the particles was more effective using an ultrasonic homogenizer. The increase of the rosin amount exhibited a reduction of the UV-visible light transmittance and the wettability was observed, demonstrating a potential use of these films in packaging.

Separation of carbohydrates using dynamically adsorbed borate stationary phase for hydrophilic interaction liquid chromatography.

In this work, a chromatographic method for the separation of carbohydrates was proposed. Tris-(hydroxymethyl)-amine (TRIS) functionalized silica-based hydrophilic interaction liquid chromatography (HILIC) stationary was synthesized. The dynamically absorbed borate layer is generated by using borate buffer as a polar modifier due to the complexation of borate with TRIS ligand in the stationary phase. The chromatographic systems were analyzed by the linear solvation energy relationship model. The calculated system constants revealed the enhancement of anionic exchange by the addition of borate in the mobile phase system. In addition, ligand exchange is critical for the retention and elution order of sugars and sugar alcohols. Carbohydrates displayed prolonged retention with different selectivity profiles relating to their complexation coefficients with borate. Experiment results showed that the effect of borate in this chromatographic system was stable within the range of pH 3-7 and borate concentration of 5-15 mM. This work provides a complementary solution for the separation of carbohydrates. It can also be extended to the separation of glycosides.

Desirable Strong and Tough Adhesive Inspired by Dragonfly Wings and Plant Cell Walls.

The production of wood-based panels has a significant demand for mechanically strong and flexible biomass adhesives, serving as alternatives to nonrenewable and toxic formaldehyde-based adhesives. Nonetheless, plywood usually exhibits brittle fracture due to the inherent trade-off between rigidity and toughness, and it is susceptible to damage and deformation defects in production applications. Herein, inspired by the microstructure of dragonfly wings and the cross-linking structure of plant cell walls, a soybean meal (SM) adhesive with great strength and toughness was developed. The strategy was combined with a multiple assembly system based on the tannic acid (TA) stripping/modification of molybdenum disulfide (MoS2@TA) hybrids, phenylboronic acid/quaternary ammonium doubly functionalized chitosan (QCP), and SM. Motivated by the microstructure of dragonfly wings, MoS2@TA was tightly bonded with the SM framework through Schiff base and strong hydrogen bonding to dissipate stress energy through crack deflection, bridging, and immobilization. QCP imitated borate chemistry in plant cell walls to optimize interfacial interactions within the adhesive by borate ester bonds, boron-nitrogen coordination bonds, and electrostatic interactions and dissipate energy through sacrificial bonding. The shear strength and fracture toughness of the SM/QCP/MoS2@TA adhesive were 1.58 MPa and 0.87 J, respectively, which were 409.7% and 866.7% higher than those of the pure SM adhesive. In addition, MoS2@TA and QCP gave the adhesive good mildew resistance, durability, weatherability, and fire resistance. This bioinspired design strategy offers a viable and sustainable approach for creating multifunctional strong and tough biobased materials.

Multifunctional fish-skin collagen-based hydrogel sealant with dual-dynamic-bond cross-linked for rapid hemostasis and accelerated wound healing.

Collagen (COL) is the most widespread functional protein. Designing and developing dual-dynamic-bond cross-linked COL adhesive hydrogel sealants with multifunctional is highly advantageous for achieving a superior wound closure effect and hemostasis. In this study, we developed hybrid hydrogels consisting of fish-skin COL, oxidized sodium alginate (OSA), borax and polyvinyl alcohol (PVA) to enhance full-thickness wound healing. The hydrogels were furnished with first-rate self-healing capabilities through the dual-dynamic-bond cross-linking of dynamic Schiff base bonds (COL-OSA) and diol boric acid bonds (OSA-borax) with reversible breakage and re-formation. Moreover, the incorporation of PVA stimulated the formation of hydrogen bonds in the system, bolstering the stability of the hydrogel framework. The prepared hydrogel manifests self-healing, injectability, multifunctional adhesiveness and biodegradability. In vivo assessment of the hemostatic capacity of COSP20 hydrogel was superior to gauze both in the mice liver injury model and mice tail amputation model. In addition, a full-thickness skin wound model in mice revealed that the COSP20 hydrogel facilitated faster wound closure by accelerating reepithelialization, COL deposition and angiogenesis. These findings illustrate the potential of hybrid fish-skin COL-based hydrogels to enhance wound healing and promote rapid tissue repair, and provide new possibilities for the effective utilization of marine fishery resources.

Structural, photoluminescence, and optical characteristics of a Sm3+ -doped lead borate-strontium-tungsten glass system: Evaluation of Judd-Ofelt intensity parameters and radiative properties.

In this study, the melt quenching approach is used to synthesize a lead borate-strontium-based glass system doped with samarium ions. Modifications in the glass network structure arising from the addition of various concentrations of Sm3+ ions were investigated via Fourier transform infrared (FTIR) spectroscopy. FTIR analysis revealed B-O-B bridges, BO3 , and BO4 units are present. UV-vis-NIR spectroscopic measurement was performed to study the optical absorption spectra. Optical constants such as optical bandgap energies, refractive indices, and other related parameters were evaluated. The lifetime fluorescence decay was measured and ranged between 1.04 and 1.88 ns. The photoluminescence spectra in the range 500-750 nm revealed four transitions from the ground state 6 G5/2 to the excited states 6 H5/2 , 6 H7/2 , 6 H9/2 and 6 H11/2 and J-O theory was utilized to study these optical transitions for Sm3+ ions. Calculations of the oscillator strengths and J-O intensity parameters were performed and the obtained J-O parameters followed the sequence Ω4 > Ω6 > Ω2 . The ratio O/R indicated a high lattice asymmetry around the samarium ions. The values of lifetimes and branching ratios for the fabricated samples emphasized their suitability to be used in laser applications. The current glass samples are good candidates for orange and red emission devices.

Borax induces ferroptosis of glioblastoma by targeting HSPA5/NRF2/GPx4/GSH pathways.

Glioblastoma multiforme (GBM) is a highly aggressive and lethal form of primary brain tumour. Borax has been demonstrated to exhibit anti-cancer activity through cell death pathways. However, the specific impact of borax on ferroptosis in GBM is not well-established, and the underlying regulatory mechanisms remain unclear. Initially, the effective concentration of borax on cell viability and proliferation in U251 and A172 cells was determined. Subsequently, the effects of borax on the wound healing were analysed. Nuclear factor erythroid 2-related factor 2 (NRF2), glutathione peroxidase 4 (GPx4), glutathione (GSH), HSP70 protein 5 (HSPA5), malondialdehyde (MDA) levels and caspase-3/7 activity were determined in borax-treated and untreated cells. Finally, the protein expression levels of HSPA5, NRF2 and GPx4 were analysed. Borax suppressed cell viability and proliferation in U251 and A172 cells in a concentration- and time-dependent manner. In addition, borax treatment decreased GPx4, GSH, HSPA5 and NRF2 levels in U251 and A172 cells while increasing MDA levels and caspase-3/7 activity. Moreover, borax reduced mRNA and protein levels of HSPA5, NRF2 and GPx4 in U251 and A172 cells. Consequently, borax may induce ferroptosis in GBM cells and regulate the associated regulatory mechanisms targeting NRF2 and HSPA5 pathways. This knowledge may contribute to the development of novel therapeutic approaches targeting ferroptosis in GBM and potentially improve patient outcomes.

A co-type ductile film with high tensile strength and fast self-healing properties for shaped fruit preservation.

Traditional petroleum-based plastics have high energy consumption, require professional equipment, are non-degradable after use, and lack antibacterial properties, making it impossible to achieve long-lasting freshness in fruits and vegetables. Herein, we report a novel co-type film-forming method with low energy consumption and without production equipment, which uses PVA-borax gel as a substrate and adds a certain proportion of CMC and TA to prepare multifunctional CMC/TA@PVA-borax composite hydrogels (CTPB). The dynamic borax ester bonding and hydrogen bonding in the CTPB hydrogel results in an ultra-high tensile strength of more than 5500% and rapid self-healing within 8 s. Interestingly, hydrogels can be arbitrarily shaped and stretched like play dough and thus can be stretched into ductile films by co-type film formation. The antimicrobial properties of the hydrogel film can be attributed to the synergistic effects of TA and borax. The mussel structure of TA allows the hydrogel film to adhere directly to different surfaces for more effective bacterial killing. In addition, the hydrogel film has a high level of biosafety and biodegradability and shows good performance in fruit storage. This study provides a convenient and low-energy method for the preparation of films, which in part reduces the increasing environmental pollution caused by petroleum-based plastics.

Activity of zinc oxide and zinc borate nanoparticles against resistant bacteria in an experimental lung cancer model.

BACKGROUND: Recent research indicates a prevalence of typical lung infections, such as pneumonia, in lung cancer patients. Klebsiella pneumoniae, Pseudomonas aeruginosa, and Acinetobacter baumannii stand out as antibiotic-resistant pathogens. Given this, there is a growing interest in alternative therapeutic avenues. Boron and zinc derivatives exhibit antimicrobial, antiviral, and antifungal properties. OBJECTIVES: This research aimed to establish the effectiveness of ZnO and ZB NPs in combating bacterial infections in lung cancer cell lines. METHODS: Initially, this study determined the minimal inhibitory concentration (MIC) and fractional inhibitory concentration (FIC) of zinc oxide nanoparticles (ZnO NPs) and zinc borate (ZB) on chosen benchmark strains. Subsequent steps involved gauging treatment success through a lung cancer-bacteria combined culture and immunohistochemical analysis. RESULTS: The inhibitory impact of ZnO NPs on bacteria was charted as follows: 0.97 µg/mL for K. pneumoniae 700603, 1.95 µg/mL for P. aeruginosa 27853, and 7.81 µg/mL for Acinetobacter baumannii 19,606. In comparison, the antibacterial influence of zinc borate was measured as 7.81 µg/mL for Klebsiella pneumoniae 700603 and 500 µg/mL for both P. aeruginosa 27853 and A.baumannii 19606. After 24 h, the cytotoxicity of ZnO NPs and ZB was analyzed using the MTT technique. The lowest cell viability was marked in the 500 µg/mL ZB NPs group, with a viability rate of 48.83% (P < 0.001). However, marked deviations appeared at ZB concentrations of 61.5 µg/mL (P < 0.05) and ZnO NPs at 125 µg/mL. CONCLUSION: A synergistic microbial inhibitory effect was observed when ZnO NP and ZB were combined against the bacteria under investigation.

Anti-Microbial Effect of AgBr-NP@CTMAB on Streptococcus Mutans and Assessment of Surface Roughness Hardness and Flexural Strength of PMMA.

Purpose: To investigate the inhibition of Streptococcus mutans (S.mutans) and its biofilm by AgBr-nanoparticles (NP) @CTMAB (cetyltrimethyl-ammonium bromide) and evaluate the changes in Polymethyl methacrylate (PMMA)'s surface roughness (Ra), microhardness, and flexural strength during prolonged immersion in AgBr-NP@CTMAB for application in the denture cleaning industry. Patients and Methods: The antibacterial activity of AgBr-NP@CTMAB against S.mutans was measured colony formation assay, OD600 and laser confocal microscopy. Changes in the specimens' values for surface roughness, microhardness, and flexural strength (MPa) were measured after immersion solutions for 180 or 360 days. Results: The AgBr-NP@CTMAB solution exhibited a robust antibacterial effect on planktonic S. mutans, with a minimum bactericidal concentration of 5 µg/mL. The 10 µg/mL AgBr-NP@CTMAB solution efficiently inhibited S. mutans biofilm formation. (2) No significant difference in surface roughness after immersion in AgBr-NP@CTMAB (10 µg/mL and 20 µg/mL) comparing with distilled water (P > 0.05) and Polident had significantly higher than distilled water (P < 0.05). There was a significant decrease in the surface hardness of the PMMA specimens that were immersed in the Polident compared with those in distilled water (P < 0.05). While, no significant differences in surface hardness after immersion in the AgBr-NP@CTMAB (P > 0.05). The result of flexural strength suggested that there was no statistically significant difference (P < 0.05) between AgBr-NP@CTMAB as well as Polident and water. Conclusion: AgBrNP@CTMAB can efficiently inhibit the growth of plankton S.mutans and biofilm formation, without affecting the flexural strength, microhardness, or surface roughness of PMMA. Therefore, AgBrNP@CTMAB holds promise as a new denture cleaning agent.

Bioproduction of Rare d-Allulose from d-Glucose via Borate-Assisted Isomerization.

d-Allulose is a low-calorie functional rare sugar with excellent processing suitability and unique physiological efficacy. d-Allulose is primarily produced from d-fructose through enzymatic epimerization, facing the constraints of a low conversion yield and high production cost. In this study, a double-enzyme cascade system with tetraborate-assisted isomerization was constructed for the efficient production of d-allulose from inexpensive d-glucose. With the introduction of sodium tetraborate (STB), capable of forming complexes with diol-bearing sugars, the conversion yield of d-allulose from d-glucose substantially escalated from the initial 17.37% to 44.97%. Furthermore, d-allulose was found to exhibit the most pronounced binding affinity for STB with an association constant of 1980.51 M-1, notably surpassing that of d-fructose (183.31 M-1) and d-glucose (35.37 M-1). Additionally, the structural analysis of the sugar-STB complexes demonstrated that d-allulose reacted with STB via the cis 2,3-hydroxyl groups in the α-furanose form. Finally, the mechanism underlying STB-assisted isomerization was proposed, emphasizing the preferential formation of an allulose-STB complex that effectively shifts the isomerization equilibrium to the allulose side, thereby resulting in high yield of d-allulose. Such an STB-facilitated isomerization system would also provide a guidance for the cost-effective synthesis of other rare sugars.

Second near-infrared fluorescent Metal-Organic framework sensors for in vivo extracellular adenosine triphosphate monitoring.

Plant nanobionic sensors enable real-time monitoring of signaling molecules in plants by interfacing them with specifically designed nanoprobes, which have been acknowledged as species-independent analytical tools. In this study, we developed a plant nanobionic sensor for in vivo detection of extracellular adenosine triphosphate (eATP) in living plants by designing a novel second near-infrared (NIR-II) fluorescent metal-organic framework (MOF) nanoprobe. The NIR-II fluorescent nanoprobe (IR-1061 micelle@ZIF-90) with a sandwich structure was synthesized by successive encapsulation of the hydrophobic NIR-II dye IR-1061 with the amphipathic polymer DSPE-mPEG 2000 and MOF ZIF-90. Interestingly, coating ZIF-90 around IR-1061 micelles increased the NIR-II fluorescence 16.6-fold. Utilizing the ultrahigh NIR-II fluorescent emission of the designed nanoprobes and specific recognition of ZIF-90 to ATP, the nanoprobes were applied to spatial and temporal monitoring eATP in model and non-model plants under environmental stress.

Optimizing bioconversion processes of rice husk into value-added products: D-psicose, bioethanol, and lactic acid.

Rice husk, rich carbon content, is an agricultural waste produced globally at an amount of 120 million tons annually, and it has high potential as a biorefinery feedstock. Herein, we investigated the feasibility of producing various products as D-psicose, bioethanol and lactic acid from rice husk (RH) through a biorefinery process. Alkali-hydrogen peroxide-acetic acid pretreatment of RH effectively removed lignin and silica, resulting in enzymatic hydrolysis yield of approximately 86.3% under optimal hydrolysis conditions. By using xylose isomerase as well as D-psicose-3-epimerase with borate, glucose present in the RH hydrolysate was converted into D-psicose with a 40.6% conversion yield in the presence of borate. Furthermore, bioethanol (85.4%) and lactic acid (92.5%) were successfully produced from the RH hydrolysate. This study confirmed the high potential of RH as a biorefinery feedstock, and it is expected that various platform chemicals and value-added products can be produced using RH.

Hexose phosphorylation for a non-enzymatic glycolysis and pentose phosphate pathway on early Earth.

Glycolysis and pentose phosphate pathways play essential roles in cellular processes and are assumed to be among the most ancient metabolic pathways. Non-enzymatic metabolism-like reactions might have occurred on the prebiotic Earth and been inherited by the biological reactions. Previous research has identified a part of the non-enzymatic glycolysis and the non-enzymatic pentose phosphate pathway from glucose 6-phosphate and 6-phosphogluconate, which are intermediates of these reactions. However, how these phosphorylated molecules were formed on the prebiotic Earth remains unclear. Herein, we demonstrate the synthesis of glucose and gluconate from simple aldehydes in alkaline solutions and the formation of glucose 6-phosphate and 6-phosphogluconate with borate using thermal evaporation. These results imply that the initial stages of glycolysis-like and pentose phosphate pathway-like reactions were achieved in borate-rich evaporative environments on prebiotic Earth, suggesting that non-enzymatic metabolism provided biomolecules and their precursors on prebiotic Earth.

11B NMR of the Morphological Evolution of Traditional Chinese Medicine Borax.

This article applies nuclear magnetic resonance technology to the study of boron-containing traditional Chinese medicine, in order to explore the morphological evolution of boron elements in traditional Chinese medicine. Borax is a traditional Chinese medicine with anti-corrosion, anti-inflammatory, antibacterial, and anticonvulsant effects. It is made by boiling, removing stones, and drying borax minerals like borate salts. This article introduces an 11B nuclear magnetic resonance method for identifying and characterizing boron-containing compounds in TCM. We applied this technology to borax aqueous solutions in different chemical environments and found that with boron mixed in the form of SP2 hybridization in equilateral triangles and SP3 hybridization in equilateral tetrahedra, the pH changes in alkaline environments significantly affected the ratio of the two. At the same time, it was found that in addition to the raw material peak, boron signals of other boron-containing compounds were also detected in 20 commercially available boron-containing TCM preparations. These new boron-containing compounds may be true pharmaceutical active ingredients, and adding them directly to the formula can improve quality and safety. This article describes the detection of 11B NMR in boron-containing traditional Chinese medicine preparations. It is simple, non-destructive, and can provide chemical fingerprint studies for boron-containing traditional Chinese medicine.