RESUMO
In this article, we present a facile and robust method for the surfactant-free preparation of polynorepinephrine stabilised microcapsules templated from an oil-in-water emulsion. The resulting microcapsule structures are dependent on the concentration of Cu2+ used to catalyse norepinephrine polymerisation. When the concentration of Cu2+ increases, the diameter of the microcapsules and the thickness of the shell increase correspondingly. The mechanical and chemical stability provided by the polynorepinephrine shell are explored using surface pressure measurements and atomic force microscopy, demonstrating that a rigid and robust polynorepinephrine shell is formed. In order to demonstrate potential application of the microcapsules in sustained release, Nile red stained squalane was encapsulated, and pH responsive release was monitored. It was seen that by controlling pH, the release profile could be controlled, with highest release efficacy achieved in alkaline conditions, offering a new pathway for development of encapsulation systems for the delivery of water insoluble actives.
Assuntos
Nanocompostos/química , Norepinefrina/química , Antibacterianos/síntese química , Antibacterianos/farmacologia , Antineoplásicos/administração & dosagem , Antineoplásicos/uso terapêutico , Cápsulas/síntese química , Linhagem Celular Tumoral , Sistemas de Liberação de Medicamentos , Emulsões/química , Escherichia coli/efeitos dos fármacos , Humanos , Hidrogéis/síntese química , Concentração de Íons de Hidrogênio , Recidiva Local de Neoplasia/tratamento farmacológico , Polietilenoglicóis/química , Neoplasias Cutâneas , Staphylococcus aureus/efeitos dos fármacos , Engenharia Tecidual , CicatrizaçãoRESUMO
Parkinson's disease (PD) is the second most common neurological disorder, associated with decreased dopamine levels in the brain. The goal of this study was to assess the potential of a regenerative medicine-based cell therapy approach to increase dopamine levels. In this study, we used rat adrenal pheochromocytoma (PC12) cells that can produce, store, and secrete dopamine. These cells were microencapsulated in the selectively permeable polymer membrane to protect them from immune responses. For fabrication of the microcapsules, we used a modified Buchi spray dryer B-190 that allows for fast manufacturing of microcapsules and is industrially scalable. Size optimization of the microcapsules was performed by systematically varying key parameters of the spraying device. The short- and long-term stabilities of the microcapsules were assessed. In the in vitro study, the cells were found viable for a period of 30 days. Selective permeability of the microcapsules was confirmed via dopamine release assay and micro BCA protein assay. We found that the microcapsules were permeable to the small molecules including dopamine and were impermeable to the large molecules like BSA. Thus, they can provide the protection to the encapsulated cells from the immune cells. Griess's assay confirmed the non-immunogenicity of the microcapsules. These results demonstrate the effective fabrication of microcapsules encapsulating cells using an industrially scalable device. The microcapsules were stable, and the cells were viable inside the microcapsules and were found to release dopamine. Thus, these microcapsules have the potential to serve as the alternative or complementary treatment approach for PD.
Assuntos
Compostos de Alumínio/síntese química , Cápsulas/síntese química , Encapsulamento de Células/métodos , Terapia Baseada em Transplante de Células e Tecidos/métodos , Doença de Parkinson , Compostos de Sódio/síntese química , Compostos de Alumínio/administração & dosagem , Compostos de Alumínio/metabolismo , Animais , Encéfalo/metabolismo , Cápsulas/administração & dosagem , Cápsulas/metabolismo , Sobrevivência Celular/efeitos dos fármacos , Sobrevivência Celular/fisiologia , Dopamina/metabolismo , Camundongos , Células PC12 , Doença de Parkinson/metabolismo , Doença de Parkinson/terapia , Polímeros/administração & dosagem , Polímeros/síntese química , Polímeros/metabolismo , Estudos Prospectivos , Células RAW 264.7 , Ratos , Compostos de Sódio/administração & dosagem , Compostos de Sódio/metabolismo , Resultado do TratamentoRESUMO
OBJECTIVE: This study aims to investigate the preparation of sustained-release microcapsules of salvianolic acid. METHODS: The stability of salvianolic acid microcapsules was improved, and the time of action was prolonged in the present study. This was prepared using the spray-drying method, with chitosan as the carrier. In the preparation process, the prescription and process were optimized by L9 (34) using an orthogonal design, with yield and drug loading as indexes, in order to obtain optimum conditions. RESULTS: The optimal process and prescription for the preparation of salvianolic acid microcapsules were found to be as follows: mass concentration of chitosan, 1.5%; mass ratio of salvianolic acid to chitosan, 1:3; inlet air temperature, 190°C; and peristaltic pump speed, 300 mL·h-1. The surface of the microcapsules was round, the drug loading was 25.99% ± 2.14%, the yield was 51.88% ± 2.84%, the entrapment efficiency was 86.21% ± 2.89%, and the average particle size was 105.6 ± 2.56 nm. The microcapsules in vitro had certain sustained release characteristics. The internally fitted first-order release model equation was ln(1-Q) = -0.236 t + 4.591 7, r = 0.920. In addition, the results of differential scanning calorimetry show that the properties of salvianolic acid were not changed by the microcapsules. CONCLUSION: Sustained-release microcapsules of salvianolic acid can be successfully prepared by adopting marine polysaccharide as a carrier.
Assuntos
Alcenos/química , Preparações de Ação Retardada/química , Polifenóis/química , Alcenos/síntese química , Cápsulas/síntese química , Cápsulas/química , Preparações de Ação Retardada/síntese química , Polifenóis/síntese químicaRESUMO
BACKGROUND: Camptothecin is known for its potent anticancer activity. However, its optimal activity is reduced due to its low solubility and stability in biological media. OBJECTIVE: The aim of the present study is to design and characterize a Camptothecin (CPT) suppository formulation. METHODS: Rectal suppositories of camptothecin alone, encapsulated with Cyclodextrin (CD) and in the ternary system (CPT encapsulated with cyclodextrin and dispersed in Polyethylene Glycol (PEG) 6000) were prepared using various hydrophobic and hydrophilic polymeric bases as semi-synthetic glyceride (Suppocire® AM Pellets) and Polyethylene Glycols (PEGs) mixtures. Formulations were evaluated by various parameters like weight variation, drug content, hardness and liquefaction time. In vitro release study was performed in USP type I apparatus using phosphate buffer pH 7.2 as dissolution media. RESULTS: Suppositories were within the permissible range of all physical parameters. In vitro drug released from water soluble base (PEG) was greater than that from oil soluble base with ninety percent (90%) of drug dissolution. It was also established that drug release from various formulations was by diffusion mechanism, according to the Higuchi's equation. CONCLUSION: This new formulation offers a new approach to colorectal cancer treatment by offering an alternative and simple drug administration route.
Assuntos
Antineoplásicos/química , Camptotecina/química , Supositórios/química , Antineoplásicos/síntese química , Camptotecina/síntese química , Cápsulas/síntese química , Cápsulas/química , Composição de Medicamentos , Liberação Controlada de Fármacos , Humanos , Estrutura Molecular , Polietilenoglicóis/química , Supositórios/síntese químicaRESUMO
Developments in the field of photodynamic therapy (PDT) are being made by investigating appropriate photosensitizers (PSs) and enhancing the penetration effect of light by developing new nano-carriers. So, to boost the PDT effect, in the present work, new metallocatanionic vesicles were fabricated by a convenient, efficient, green and inexpensive method to encapsulate PSs and evaluate their antimicrobial PDT against the drug-resistant bacterium Staphylococcus aureus. They were prepared from a combination of a double-chained copper-based cationic metallosurfactant (CuCPCII) and an anionic surfactant sodium bis(2-ethylhexyl)sulfosuccinate (Aerosol OT or AOT). The surface charge, structure and ability to encapsulate oppositely charged photosensitizers are some crucial factors that need to be controlled for their effective utilization in PDT. In this approach, two of the fractions, one each from a cationic rich and anionic rich side, were selected to encapsulate cationic (methylene blue; MB) and anionic (rose bengal (RB)) PSs after characterization by SAXS, AFM, FESEM, DLS, and zeta-potential, and conductivity measurements. Afterwards, PDT was performed on S. aureus (a multidrug-resistant bacterium) by the colony forming unit (CFU) method using PS encapsulated metallocatanionic vesicles that demonstrated high bactericidal activity by using visible light (532 nm) and facilitated the generation of singlet oxygen. The singlet oxygen generation capability of both the PSs was enhanced under irradiation when encapsulated in metallocatanionic vesicles because the presence of metal accelerated the intersystem crossing of triplet oxygen to singlet oxygen. Furthermore, these studies reveal that the metallocatanionic vesicles have dual functionality i.e. encapsulate PSs and even show dark toxicity against S. aureus. To study the killing of S. aureus, bacterial DNA was extracted and its interactions and conformational changes in the presence of metallocatanionic vesicles were analyzed via., UV-Visible, and circular dichroism (CD) spectroscopy. Comet assay (single-cell gel-electrophoresis) demonstrated the DNA damage after PDT treatment in an individual cell. The bacterial DNA damage was more with the metallosurfactant rich 70 : 30 fraction than with the 30 : 70 fraction, in combination with RB under irradiation. This work provides a new metal hybrid smart material that possesses dual functionality and is prepared by an easy, economical and feasible procedure which resulted in enhanced PDT against a drug-resistant bacterium, thus, providing an alternative for antibacterial therapy.
Assuntos
Antibacterianos/farmacologia , Compostos Organometálicos/farmacologia , Fotoquimioterapia , Fármacos Fotossensibilizantes/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Tensoativos/farmacologia , Antibacterianos/síntese química , Antibacterianos/química , Cápsulas/síntese química , Cápsulas/química , Cápsulas/farmacologia , Farmacorresistência Bacteriana Múltipla/efeitos dos fármacos , Testes de Sensibilidade Microbiana , Compostos Organometálicos/síntese química , Compostos Organometálicos/química , Tamanho da Partícula , Fármacos Fotossensibilizantes/síntese química , Fármacos Fotossensibilizantes/química , Propriedades de Superfície , Tensoativos/síntese química , Tensoativos/químicaRESUMO
We report the successful synthesis of superparamagnetic latex particles with a high fraction of magnetic materials and a fast magnetic response. Commercial fatty acid-modified iron oxide (IO) nanoparticles were first assembled into spherical clusters through an emulsification/solvent evaporation method. The resulting particles were stabilized with poly(2-dimethylaminoethyl methacrylate)-b-polystyrene (PDMAEMA-b-PS) amphiphilic block copolymers obtained by RAFT, and used as seeds in the emulsion copolymerization of styrene and divinylbenzene (DVB), used as cross-linking agent. The latter revealed to be key in preserving the integrity of the clusters during the emulsion polymerization reaction, and a minimum amount (i.e. 10 wt%) was necessary to obtain stable latexes composed of a core of densely packed IO nanoparticles surrounded by a thin polymer shell. DVB also had a strong influence on the particle morphology as the core-shell morphology of the composite particles could be tuned with either a smooth polymer shell or a raspberry-like surface by adjusting the DVB-to-monomer weight ratio and the feeding conditions. The amphiphilic macroRAFT not only provides colloidal stability to the magnetic latexes, but also offers a versatile platform for the design of composite particles with tailored surface properties by an appropriate choice of the hydrophilic block. Our strategy was thus successfully extended to poly(acrylic acid)-b-polystyrene (PAA-b-PS) copolymers, leading to PAA-stabilized composite particles. Both kinds of IO-encapsulated particles showed superparamagnetic properties (magnetizations at saturation of 35 and 31 emu g-1 for PDMAEMA and PAA systems, respectively), and could thus find interesting applications as magnetic carriers in the biological field due to their thermo- (for PDMAEMA) and pH- (for PDMAEMA and PAA) responsive properties.
Assuntos
Compostos Férricos/química , Polímeros/química , Cápsulas/síntese química , Cápsulas/química , Estrutura Molecular , Tamanho da Partícula , Polímeros/síntese química , Propriedades de SuperfícieRESUMO
The magnetic reduction-responsive alginate-based microcapsules (MRAMCs) have been developed successfully with thiolated alginate and oleic acid (OA) modified Fe3O4 nanoparticles (OA-Fe3O4 NPs) via a facile sonochemical method. The obtained MRAMCs could be used as multifunctional carriers for hydrophobic drugs targeted delivery and triggered release due to their merits, such as biocompatibility, non-immunogenicity, magnetic targeting drug delivery and reduction-responsive drug release. The MRAMCs were endowed with magnetic targeting function owing to the encapsulation of the superparamagnetic OA-Fe3O4 NPs, which was confirmed by transmission electron microscope and vibrating sample magnetometer. In addition, the MRAMCs presented excellent reduction-responsive release ability for hydrophobic drugs on account of the disulfide bonds in the wall of microcapsules, which were formed by the cross-linking of sulfhydryl groups on thiolated alginate under ulstrasonication. Meanwhile, confocal laser scanning microscopy measurement indicated that coumarin 6 acted as a hydrophobic model drug could be loaded into MRAMCs easily by dissolving in soybean oil before ultrasonication. Overall, these results demonstrated that MRAMCs would be a promising platform to build controllable drug delivery systems for targeted delivery and triggered release of hydrophobic drugs in biomedical application.
Assuntos
Alginatos/química , Cápsulas , Portadores de Fármacos , Nanopartículas de Magnetita/química , Células A549 , Cápsulas/síntese química , Cápsulas/química , Cumarínicos/farmacologia , Portadores de Fármacos/síntese química , Portadores de Fármacos/química , Liberação Controlada de Fármacos , Células HeLa , Humanos , Ácido Oleico/química , Tiazóis/farmacologiaRESUMO
The cross-linked small-molecule micelles (cSMs) have found applications in many fields but their low loading capacity and non-fluorescence property hindered their further development. Herein, water-soluble organic nanoparticles were applied as templates to "stretch" the hydrophobic core of cSMs and photo-cross-linking was employed to supply photoluminescence. The resulting cross-linked small-molecule capsules (cSCs) not only reserve the superior properties of cSMs of accurate monomer, easy functionalization and robust stability, but also achieve high drug loading capacity and excitation wavelength-dependent fluorescence, where the drug loading contents (DLCs) for various hydrophobic drugs were more than 30-fold higher than that of cSMs, and the maximum quantum yield could be as high as 12.0%. Featuring these superiorities, the cSCs hold promising potential in many fields and an example of doxorubicin-loaded cSCs (DOX@cSCs) for multichannel imaging-guided drug delivery is shown in this work.
Assuntos
Antibióticos Antineoplásicos/farmacologia , Reagentes de Ligações Cruzadas/química , Doxorrubicina/farmacologia , Sistemas de Liberação de Medicamentos , Medições Luminescentes , Imagem Óptica , Bibliotecas de Moléculas Pequenas/química , Antibióticos Antineoplásicos/química , Cápsulas/síntese química , Cápsulas/química , Sobrevivência Celular/efeitos dos fármacos , Reagentes de Ligações Cruzadas/síntese química , Dimetilformamida/análise , Relação Dose-Resposta a Droga , Doxorrubicina/química , Desenho de Fármacos , Liberação Controlada de Fármacos , Células HeLa , Humanos , Interações Hidrofóbicas e Hidrofílicas , Estrutura Molecular , Tamanho da Partícula , Processos Fotoquímicos , Bibliotecas de Moléculas Pequenas/síntese química , Propriedades de SuperfícieRESUMO
The development of polymers with built-in sensors that provide readily perceptible optical warning signs of mechanical events has received considerable interest. A simple and versatile concept to bestow polymers with mechanochromic behavior is the incorporation of dye-filled microcapsules. Such capsules release their cargo when their shell is damaged, and the dye is subsequently activated through a chemical or physical change that causes a chromogenic response. Here, we report the preparation of fluorescent poly(urea-formaldehyde) microcapsules containing solutions of a solvatochromic cyanostilbene dye and their integration in different polymers. When objects made from such composites are damaged, the dye solution is released from the containers, diffuses into the matrix, and the solvent evaporates. As a result, the polarity around the dye molecules changes, and this leads to a change of the fluorescence color. Alternatively, the dye is blended into the polymer matrix, microcapsules are loaded with a solvent, and the release of the latter triggers the color change. Both mechanisms afford ratiometric signals because the capsules that remain intact or dye molecules that are not exposed to the solvent can be used as a built-in reference; therefore, a quantitative assessment of the damage inflicted on the material is a priori possible.
Assuntos
Corantes Fluorescentes/química , Formaldeído/química , Polímeros/química , Ureia/química , Cápsulas/síntese química , Cápsulas/química , Corantes Fluorescentes/síntese química , Formaldeído/síntese química , Fenômenos Mecânicos , Estrutura Molecular , Tamanho da Partícula , Polímeros/síntese química , Ureia/síntese químicaRESUMO
Stimuli-responsive microcapsules, which can release the encapsulated payload under various environmental stimuli, have attracted great interests of the food, pharmaceutical, cosmetics, and agricultural fields in recent years. However, most reported responsive microcapsules normally have a single storage area and thus load/release only one type of payload under one stimulus. In this work, we fabricated a novel kind of multicompartmental intelligent microcapsule with two storage areas and independently controlled (preprogrammable) releasing behavior under different stimuli via rapid photopolymerization of Pickering emulsions. In our strategy, a temperature-sensitive polymeric (N-isopropyl acrylamide, pNIPAM) particle was prepared and loaded with Nile Red (NR), which was then employed as a Pickering emulsifier to stabilize oil-in-water droplets. The oil was composed of pH-responsive monomers and oil-soluble fluorescent green (OG). Upon exposure to photoirradiation, pH-responsive monomers were polymerized along the interior of the droplets and converted into microcapsules. With NR in the temperature-sensitive pNIPAM@NR particles and OG in the interior of the microcapsules, the as-prepared microcapsules possess dual-carrier capability with two payloads encapsulated dependently in two different compartments. In addition, the microcapsules could respond to two different external stimuli (temperature and pH) and realize the selective and independent release of encapsulated molecules (NR and OG) from the shell and core without any mutual interference. More importantly, the release of NR and OG can be programmed by preprogramming the order of the stimulus responses, which can be altered. Our work develops a simple and effective strategy to fabricate responsive multicompartment microcapsules with preprogrammable release of different molecules.
Assuntos
Resinas Acrílicas/síntese química , Cápsulas/síntese química , Resinas Acrílicas/química , Cápsulas/química , Sistemas de Liberação de Medicamentos/instrumentação , Emulsões/síntese química , Emulsões/química , Concentração de Íons de Hidrogênio , TemperaturaRESUMO
Iron oxide-based magnetic resonance imaging (MRI) contrast agents have negative contrast limitations in cancer diagnosis. Gadolinium (Gd)-based contrast agents show toxicity. To overcome these limitations, Gd-doped ferrite (Gd:Fe3O4 (GdIO) nanoparticles (NPs) were synthesized as T1-T2 dual-modal contrast agents for MRI-traced drug delivery. A theranostics GdIO encapsulated in a Generation 4.5 PAMAM dendrimer (G4.5-GdIO) was developed by alkaline coprecipitation. The drug-loading efficiency of the NPs was â¼24%. In the presence of a low-frequency alternating magnetic field (LFAMF), a maximum cumulative doxorubicin (DOX) release of â¼77.47% was achieved in a mildly acidic (pHâ¯=â¯5.0) simulated endosomal microenvironment. Relaxometric measurements indicated superior r1 (5.19 mM-1s-1) and r2 (26.13â¯mM-1s-1) for G4.5-GdIO relative to commercially available Gd-DTPA. Thus, G4.5-GdIO is promising as an alternative noninvasive MRI-traced cancer drug delivery system.
Assuntos
Antibióticos Antineoplásicos/farmacologia , Dendrímeros/química , Doxorrubicina/farmacologia , Nanopartículas/química , Poliaminas/química , Nanomedicina Teranóstica , Antibióticos Antineoplásicos/química , Cápsulas/síntese química , Cápsulas/química , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Meios de Contraste/síntese química , Meios de Contraste/química , Dendrímeros/síntese química , Doxorrubicina/química , Sistemas de Liberação de Medicamentos , Ensaios de Seleção de Medicamentos Antitumorais , Compostos Férricos/química , Gadolínio/química , Células HeLa , Humanos , Imageamento por Ressonância Magnética , Tamanho da Partícula , Poliaminas/síntese química , Propriedades de SuperfícieRESUMO
Polymeric microcapsules have begun to attract significant interest in biomedical fields. As the interactions between cells and materials are influenced by both cell type and elasticity, silk-based microcapsules are synthesized with desirable mechanical features using layer-by-layer assembly and then the uptake of these microcapsules by BeWo b30 placental cells is investigated. Cellular uptake is enhanced with increasing of elastic modulus of the silk-based microcapsules. More importantly, the distinct microvilli of these cells behaves in a diverse manner when exposed to microcapsules with different mechanical features, including grabbing (rigidity) or random touching (soft) behavior; these factors affect the final uptake. Inspired by oocyte pickup, the grabbing behavior of the microvilli may provide valuable information with which to elucidate the specific characteristics of uptake between cells and man-made particles, particularly in the reproductive system.
Assuntos
Cápsulas/metabolismo , Placenta/citologia , Seda/metabolismo , Cápsulas/síntese química , Linhagem Celular , Feminino , Humanos , Microvilosidades/metabolismo , Gravidez , Seda/síntese química , Solventes , Eletricidade EstáticaRESUMO
Poly(urea-formaldehyde) (PUF) microcapsules filled with dicyclopentadiene (DCPD) were prepared by in situ polymerisation and the effect of synthesis parameters, such as pH of the solution and agitation rate, on microcapsules size and shell thickness was evaluated. Scanning electron microscopy (SEM) and Fourier transform infra-red spectroscopy (FTIR) were performed. Adjusted pH conditions (pH = 3.5) and agitation rate (1350 RPM) were found using a design of experiments (DOE). SEM results indicated that microcapsule size was directly affected by agitation rate, whereas shell thickness was mostly affected by pH. After obtaining adjusted synthesis conditions, microcapsules presenting mean size of 60 µm and mean shell thickness of 4 µm were embedded in an epoxy matrix for evaluating the self-healing effect. FTIR and SEM analyses in damaged samples suggested that a healing agent was delivered to the crack location.
Assuntos
Cápsulas/síntese química , Formaldeído/síntese química , Polímeros/síntese química , Cápsulas/química , Técnicas de Química Sintética , Composição de Medicamentos , Formaldeído/química , Concentração de Íons de Hidrogênio , Indenos/administração & dosagem , Tamanho da Partícula , Polimerização , Polímeros/químicaRESUMO
This study aimed to investigate the antioxidant activity and release behavior of anthocyanin (ANC) loaded within FA-g-MD wall (ANC-FA-g-MD microcapsule) in vitro. The microencapsulation of ANC was prepared by spray drying and displayed a biphasic release profile. The combination of ANC and FA-g-MD (0.0625-1 mg/mL) showed a higher antioxidant activity than that of both individuals. A possible intermolecular interaction between ANC and FA-g-MD was studied by UV-vis spectra. Intracellular reactive oxygen species (ROS), 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) test, and protein expression of quinone oxidoreductase 1(NQO1), glutathione reductase (GSR) and γ-glutamate cysteine ligase catalytic subunit (γ-GCLC) were measured through human colon cancer cells (HT-29). After a 24-hour incubation of the HT-29, the combinations (0-60 µg/mL) exhibited a high potential to diminish the ROS level. And the distinct upregulated expressions of GCLC and NQO1 of HT-29 were detected after treatment with combinations compared to those of single ones. These results suggested that the ANC-FA-g-MD microcapsules exerts enhanced antioxidant effect with capability of the modulation of GCLC and NQO1.
Assuntos
Antocianinas/farmacologia , Cápsulas/síntese química , Ácidos Cumáricos/química , Portadores de Fármacos , Sequestradores de Radicais Livres/farmacologia , Peróxido de Hidrogênio/antagonistas & inibidores , Polissacarídeos/química , Antocianinas/química , Sobrevivência Celular/efeitos dos fármacos , Composição de Medicamentos/métodos , Ativação Enzimática/efeitos dos fármacos , Sequestradores de Radicais Livres/química , Regulação da Expressão Gênica , Glutamato-Cisteína Ligase/genética , Glutamato-Cisteína Ligase/metabolismo , Glutationa Redutase/genética , Glutationa Redutase/metabolismo , Células HT29 , Humanos , Peróxido de Hidrogênio/farmacologia , NAD(P)H Desidrogenase (Quinona)/genética , NAD(P)H Desidrogenase (Quinona)/metabolismo , Estresse Oxidativo/efeitos dos fármacos , Subunidades Proteicas/agonistas , Subunidades Proteicas/genética , Subunidades Proteicas/metabolismoRESUMO
Microencapsulated phase change materials (MicroPCMs)-incorporated in epoxy composites have drawn increasing interest due to their promising application potential in the fields of thermal energy storage and temperature regulation. However, the study on the effect of MicroPCMs on their microstructure, thermal and viscoelastic properties is quite limited. Herein, a new type of smart epoxy composite incorporated with polyurea (PU)-shelled MicroPCMs was fabricated via solution casting method. Field emission-scanning electron microscope (FE-SEM) images revealed that the MicroPCMs were uniformly distributed in the epoxy matrix. The thermal stabilities, conductivities, phase change properties, and dynamic mechanical behaviors of the composite were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), thermal constant analyzer and infrared thermography. The results suggested that the heat storage ability of the composites was improved by increasing the MicroPCMs content. The thermal stability of MicroPCMs was found to be enhanced after incorporation into the matrix, and the MicroPCMs-incorporated epoxy composites showed a good thermal cycling reliability. Moreover, the incorporation of MicroPCMs reduced the composites' storage modulus but increased the glass transition temperature (Tg) as a result of their restriction to the chain motion of epoxy resin. Besides, a less marked heating effect for the composite was explored through infrared thermography analysis, demonstrating the good prospect for temperature regulation application.
Assuntos
Cápsulas/síntese química , Resinas Epóxi/química , Transição de Fase , Alcanos/química , Emulsões/química , Temperatura Alta , Cinética , Teste de Materiais/métodos , Fenômenos Mecânicos , Tamanho da Partícula , Reprodutibilidade dos Testes , Propriedades de Superfície , Temperatura , TermodinâmicaRESUMO
Phytosterols were microencapsulated by spray drying in a shell represented by WPI, inulin and chitosan at four different combinations through the formulation of aqueous suspensions. Moreover, two concentrations of Tween 80 (1.25% and 2.50% w/w) and two inlet temperatures (125⯰C and 155⯰C) were tested. The effect of the different experimental conditions on the process yield and on the microcapsules properties was evaluated. A significant effect of all variables on the microcapsule properties was found. Accordingly, the best performance, with the maximum loading capacity of 25%, was obtained by using only WPI as shell material, Tween 80 at 1.25% and inlet temperature of 155⯰C. The process was successfully scaled-up from laboratory equipment to a semi-technical scale keeping the optimal shell formulation and process conditions.
Assuntos
Cápsulas/síntese química , Composição de Medicamentos/métodos , Alimento Funcional/análise , Fitosteróis/química , Quitosana/química , Dessecação/métodos , Inulina/química , Oxirredução , Tamanho da Partícula , Fitosteróis/farmacologia , Polissorbatos , Suspensões/química , Temperatura , Proteínas do Soro do Leite/química , Proteínas do Soro do Leite/isolamento & purificaçãoRESUMO
Microcapsules and nanocapsules based on the contemporary presence of sulfonate lignin and tannic acid have been prepared by the layer-by-layer procedure, using MnCO3 or organosolv lignin as core templates, and polydiallyldimethylammonium chloride or chitosan as positive charged supporting layers. Nanocapsules and microcapsules of mixed polyphenols showed antioxidant activity, UV-shielding properties, and electrochemical responsiveness, higher than that in homopolymer nanocapsule counterparts and of the native polyphenols, suggesting the presence of synergistic effects between the two components. The presence of UV-visible bathochromic shift suggested the formation of J-aggregates characterized by an orientation of the adjacent phenolic rings parallel to the longitudinal direction of the layer, with a head-to-tail like arrangement. Moreover, nanocapsules of mixed polyphenols showed an aggregation state higher than that observed in references, the specific morphology of their surface being dependent on the structural arrangement of the different components.
Assuntos
Antioxidantes/administração & dosagem , Cápsulas/química , Nanocápsulas/química , Protetores contra Radiação/administração & dosagem , Cápsulas/síntese química , Radicais Livres/química , Lignina/química , Polifenóis/química , Taninos/química , Raios UltravioletaRESUMO
The xanthine oxidase inhibitory activity and thermostability of Cinnamomum osmophloeum leaf oil microencapsulated with ß-cyclodextrin were evaluated in this study. The yield of leaf oil microcapsules was 86.3% using the optimal reaction conditions at the leaf oil to ß-cyclodextrin ratio of 15:85 and ethanol to water ratio ranging from 1:3 to 1:5. Based on the FTIR analysis, the characteristic absorption bands of major constituent, trans-cinnamaldehyde, were confirmed in the spectra of leaf oil microcapsules. According to the dry-heat aging test, ß-cyclodextrin was thermostable under the high temperature conditions, and it was beneficial to reduce the emission of C. osmophloeum leaf oil. Leaf oil microcapsules exhibited high xanthine oxidase inhibitory activity, with an IC50 value of 83.3 µg/mL. It is concluded that the lifetime of C. osmophloeum leaf oil can be effectively improved by microencapsulation, and leaf oil microcapsules possess superior xanthine oxidase inhibitory activity.
Assuntos
Acroleína/análogos & derivados , Cinnamomum/química , Supressores da Gota/química , Óleos de Plantas/química , Xantina Oxidase/antagonistas & inibidores , beta-Ciclodextrinas/química , Acroleína/química , Acroleína/isolamento & purificação , Cápsulas/síntese química , Composição de Medicamentos/métodos , Estabilidade de Medicamentos , Ensaios Enzimáticos , Supressores da Gota/isolamento & purificação , Temperatura Alta , Humanos , Folhas de Planta/química , Óleos de Plantas/isolamento & purificação , Xantina Oxidase/químicaRESUMO
In this work, a series of polyurea-based lambda-cyhalothrin-loaded microcapsules (MCs) with three different size distributions (average diameters of 1.35⯵m, MC-S; 5.13⯵m, MC-M; and 21.48⯵m, MC-L) were prepared and characterized. The results indicated that MCs with a smaller particle size distribution had a faster release rate and excellent initial efficacy against pests. MC-L had a remarkably slow incipient release rate, outstanding photostability and better later-stage efficacy than that of the other tested MCs. The results clarified that the diameter distribution of MCs is the key factor in determining the release property and bioactivity of the MC formulations. Subsequently, the binary mixture MC formulations of MC(+M), MC(S+L) and MC(M+L) were obtained by mixing MC-S, MC-M or MC-L at 1:1 to establish a two-stage release system utilized for foliar application situations. Greenhouse and field experiments showed that MC(S+L) provided an optimal efficacy, and its effective duration was much longer than that of the emulsifiable concentrate (EC) group. Therefore, the release system established in this study was simple and workable for regulating the initial and long-term efficacy by adjusting the particle size distribution; in addition, this system has potential applications in other fields such as drug delivery devices.
Assuntos
Nitrilas/química , Polímeros/química , Piretrinas/química , Cápsulas/síntese química , Cápsulas/química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Core/shell hydrogel microcapsules attract increasing research attention due to their potentials in tissue engineering, food engineering, and drug delivery. Current approaches for generating core/shell hydrogel microcapsules suffer from large geometric variations. Geometrically defective core/shell microcapsules need to be removed before further use. High-throughput geometric characterization of such core/shell microcapsules is therefore necessary. In this work, a continuous-flow device was developed to measure the geometric properties of microcapsules with a hydrogel shell and an aqueous core. The microcapsules were pumped through a tapered microchannel patterned with an array of interdigitated microelectrodes. The geometric parameters (the shell thickness and the diameter) were derived from the displacement profiles of the microcapsules. The results show that this approach can successfully distinguish all unencapsulated microparticles. The geometric properties of core/shell microcapsules can be determined with high accuracy. The efficacy of this method was demonstrated through a drug releasing experiment where the optimization of the electrospray process based on geometric screening can lead to controlled and extended drug releasing profiles. This method does not require high-speed optical systems, simplifying the system configuration and making it an indeed miniaturized device. The throughput of up to 584 microcapsules per minute was achieved. This study provides a powerful tool for screening core/shell hydrogel microcapsules and is expected to facilitate the applications of these microcapsules in various fields.