How anatomic should anatomic total shoulder arthroplasty be? Evaluation of humeral head reconstruction with the best-fit circle.

BACKGROUND: Humeral implant designs for anatomic total shoulder arthroplasty (aTSA) focus on anatomic reconstruction of the articular segment. Likewise, the pathoanatomy of advanced glenohumeral osteoarthritis often results in humeral head deformity. We hypothesized the anatomic reconstruction of the humeral head in aTSA risks overstuffing the glenohumeral joint. METHODS: Ninety-seven cases (52 females) of primary glenohumeral osteoarthritis in patients treated with aTSA were evaluated. Preoperative computed tomography scans were used to classify glenoid morphology according to the Walch classification. Coronal plane images in the plane of the humerus were used to determine the anatomic best-fit circle as described by Youderian et al. Humeral head thinning was determined as the distance from the center of rotation of the best-fit circle to the nearest point along the humeral articular surface. aTSA was modeled with a predicted anatomic humeral head and a simulated 4-mm polyethylene glenoid component. The change in the position of the native humerus was determined. Wilcoxon Rank Sum tests were used to evaluate differences in humeral head thinning and humeral lateralization between monoconcave and biconcave glenoid morphologies. Spearman's rank correlation coefficients were used to assess the relationship between humeral head thinning with preoperative active forward elevation and external rotation. RESULTS: The mean radius of the best-fit circle was 25.0 ± 2.1 mm. There was a mean thinning of 2.4 ± 2.0 mm (range -1.7 to 8.3). The mean percent thinning of the humeral head was 9.4% ± 7.7%. The mean humeral lateralization was 6.4 ± 2.0 mm. Humeral head thinning was not significantly associated with active forward elevation (r = -0.15, P = .14) or active external rotation (r = -0.12, P = .25). There were no significant differences in the percentage of humeral head thinning (P = .324) or humeral lateralization (P = .350) between concentric and eccentric glenoid wear patterns. CONCLUSIONS: Utilization of the best-fit circle as a guide in aTSA may risk excessive lateralization of the humerus and overstuffing the glenohumeral joint. This may have implications for subscapularis repair and healing, as well as glenoid implant and rotator cuff longevity. These findings call into question whether recreation of normal glenohumeral anatomy in aTSA is appropriate for all patients. Humeral head reconstruction in aTSA should account for glenohumeral joint volume and soft tissue contracture.

The proximal humeral locking plate positioning to the pectoralis major tendon in achieving the proper calcar screw location: a cadaveric study.

BACKGROUND: Proximal humeral fracture is the third most common of osteoporotic fracture. Most surgical cases were treated by fixation with anatomical locking plate system. The calcar screw plays a role in medial support and improving varus stability. Proximal humerus fracture in elderly patients are commonly seen with greater tuberosity (GT) fracture. The GT fragment is sometimes difficult to use as an anatomic landmark for proper plate and screw position. Therefore, the insertion of pectoralis major tendon (PMT) may be used as an alternative landmark for appropriate plate and calcar screw position. The purpose of study is going to identify the vertical distance from PMT to a definite point on the position of locking plate. METHODS: 30 cadaveric shoulders at the department of clinical anatomy were performed. Shoulders with osteoarthritic change (n = 5) were excluded. Finally, 25 soft cadaveric shoulders were recruited in this study. The PHILOS™ plate was placed 2 mm posterior to the bicipital groove. A humeral head (HH) was cut in the coronal plane at the level of the anterior border of the PHILOS plate with a saw. A calcar screw was inserted close to the inferior cortex of HH. Distance from the upper border of elongated combi-hole (UB-ECH) to the upper border of pectoralis major tendon (UB-PMT) was measured. The plate was then moved superiorly until the calcar screw was 12 mm superior to the inferior border of HH and the distance was repeatedly measured. RESULTS: The range of distance from UB-PMT to the UB-ECH was from - 4.50 ± 7.95 mm to 6.62 ± 7.53 mm, when calcar screw was close to inferior border of HH and when the calcar screw was 12 mm superior to the inferior border of HH, respectively. The highest probability of calcar screw in proper location was 72% when UB-ECH was 3 mm above UB-PMT. DISCUSSION AND CONCLUSION: The GT fragment is sometimes difficult to use as an anatomic landmark for proper plate and screw position. PMT can be used as an alternative anatomic reference. UB-PMT can serve as a guide for proper calcar screw insertion. UB-ECH should be 3 mm above UB-PMT and three-fourths of cases achieved proper calcar screw location.

Anatomical study for the treatment of proximal humeral fracture through the medial approach.

BACKGROUND: The treatment of complex 3- and 4-part proximal humeral fractures has been controversial due to numerous postoperative complications. With the further study of medial support and blood supply of humeral head, new techniques and conception are developing. The study aims to illustrate the medial approach of the proximal humeral fracture through cadaver autopsy. METHOD: Upper limbs from 19 cadavers have been dissected to expose the shoulder joint. We selected the coracoid process as the bony reference. Vernier caliper will be used to measure the following data, including distance from coracoid process to circumflex brachial artery, distance between anterior humeral circumflex artery (ACHA) and posterior circumflex brachial artery (PCHA) and their diameters. Assessment included the characteristics of the vascular supply around the humeral head, identification of the structures at risk, quality of exposure of the bony structures, and feasibility of fixation. RESULTS: The medial approach is appropriate in 86.84% anatomical patterns. Between the lower part of the shoulder capsule and the insertion of conjoined tendon, the bony surface exposed was limited by the interval between ACHA and PCHA. An interval of 2 to 3 cm (24.29 ± 3.42 mm) was available for medial plate. ACHA (49.35 ± 8.13 mm, 35.14-68.53 mm) and PCHA (49.62 ± 7.82 mm, 37.67-66.76 mm) were about 5 cm away from the coracoid process. Risk structures including ACHA and PCHA originate in common, PCHA originated from the deep brachial artery (DBA), the presence of perforator vessels, musculocutaneous nerve intersects with ACHA, the diameter of PCHA: ACHA < 1.5. In 13.15% anatomical patterns, this risk structure should be taken seriously. CONCLUSION: The medial approach opens a new perspective in the optimal management of complex fractures of proximal humerus. Anatomical research proves that the medial approach is feasible. The interval between ACHA and PCHA is suitable for placement. Anatomical pattern and indication have been discussed, and we hypothesized that ACHA has been destroyed in complex PHFs. With further studies on the anatomy and mechanism of injury, the development of more clinical cases will be an important work of our institution in the future.

Anatomical, functional and biomechanical review of the glenoid labrum.

The glenohumeral joint is the most mobile joint in the human skeleton, supported by both active and passive stabilisers. As one of the passive stabilisers, the glenoid labrum has increasingly been recognised to play an important role in stability of the glenohumeral joint, acting to maintain intraarticular pressure, centralise the humeral head and contribute to concavity-compression stability. Several studies have investigated the macro- and micro-anatomical features of the labrum as well as its biomechanical function. However, in order to better understand the role of the labrum and its mechanics, a comprehensive anatomical, functional and biomechanical review of these studies is needed. Therefore, this article reviews the current literature detailing anatomical descriptions of the glenoid labrum, with an emphasis on its function(s) and biomechanics, as well as its interaction with neighbouring structures. The intimate relationship between the labrum and the surrounding structures was found to be important in glenohumeral stability, which owes further investigation into the microanatomy of labrum to better understand this relationship.

Is There a Decrease in the Acromiohumeral Distance Among Recreational Overhead Athletes With Rotator Cuff-Related Shoulder Pain?

CONTEXT: Recreational overhead athletes are exposed to high overload, which increases the risk of shoulder injuries. Reduction of the acromiohumeral distance (AHD) is often associated with rotator cuff-related shoulder pain (RCRSP) among the general population. However, the AHD of symptomatic shoulders of recreational athletes has not yet been compared with their asymptomatic shoulders. OBJECTIVE: To compare the AHD of a symptomatic to asymptomatic shoulder at rest (0°) and 60° abduction. To establish the relationship between AHD, pain, and functional limitations of recreational athletes with RCRSP. DESIGN: Cross-sectional study. SETTING: University laboratory. PARTICIPANTS: A total of 45 recreational overhead athletes with RCRSP were examined. MAIN OUTCOME MEASURES: The AHD was measured by ultrasonography at 0° and 60° abduction (angles). Shoulder pain was assessed using a numeric pain scale, whereas functional limitations were assessed using the The Disabilities of the Arm, Shoulder, and Hand questionnaire. Differences in the between-shoulders condition (symptomatic and asymptomatic) were determined using 2-way analysis of variance for repeated measures. A Pearson correlation established the relationship between AHD, pain, and functional limitations. RESULTS: No angles × shoulder condition interactions (P = .776) nor shoulder condition effects (P = .087) were detected, suggesting no significant differences (P > .05) between asymptomatic and symptomatic shoulders in the AHD at 0° or 60°. The AHD at 60° reduced significantly compared with 0° (3.05 [1.36] mm [2.77-3.33], angle effects: P < .001). The AHD at 0° and 60° was not correlated with pain or functional limitations (-.205 ≤ r ≤ .210, .167 ≤ P ≤ .585). CONCLUSIONS: The AHD of recreational athletes is not decreased in symptomatic shoulders compared with asymptomatic shoulders. Reduction of the AHD in symptomatic shoulders is not associated with an increase in pain or functional limitations of recreational athletes with RCRSP.

Evaluation of three-dimensional acromiohumeral distance in the standing position and comparison with its conventional measuring methods.

BACKGROUND: Narrowing of the acromiohumeral distance (AHD) implies a rotator cuff tear. However, conventional AHD measurements using two-dimensional (2D) imaging or with the patient in the supine position might differ from that while standing during daily activity. This study aimed to evaluate the three-dimensional (3D) actual distance between the acromion and humeral head in the standing position and compare the AHD values with those obtained using conventional measuring methods. METHODS: Computed tomography (CT) images of 166 shoulders from 83 healthy volunteers (31 male and 52 female; mean age 40.1 ± 5.8 years; age range, 30-49 years) were prospectively acquired in the supine and standing positions using conventional and upright CT scanners, respectively. The minimum distance between the acromion and humeral head on the 3D surface models was considered as the 3D AHD. We measured the 2D AHD on anteroposterior digitally reconstructed radiographs. The AHD values were compared between the supine and standing positions and between the 2D and 3D measurements. RESULTS: The mean values of 2D AHD were 8.8 ± 1.3 mm (range, 5.9-15.4 mm) in the standing position and 8.1 ± 1.2 mm (range, 5.3-14.3 mm) in the supine position. The mean values of 3D AHD were 7.3 ± 1.4 mm (range, 4.7-14.0 mm) in the standing position and 6.6 ± 1.2 mm (range, 4.4-13.7 mm) in the supine position. The values of 3D AHD were significantly lower than those of 2D AHDs in both the standing and supine positions (P < 0.001). The values of 2D and 3D AHDs were significantly lower in the supine position than in the standing position (P < 0.001). CONCLUSIONS: This study evaluated the 3D AHD of normal shoulders in the standing position using an upright CT scanner. The present results indicated that assessments in the supine position can underestimate the value of the AHD compared with those made in the standing position and that assessments using 2D analysis can overestimate the value.

Quantitative and Qualitative Analyses of the Glenohumeral Ligaments: An Anatomic Study.

BACKGROUND: While several studies have qualitatively described the anatomy of the glenohumeral ligaments, there remains a lack of consensus regarding their quantitative humeral and glenoid attachment sites. PURPOSE: To quantitatively and qualitatively describe the anatomic humeral and glenoid attachment sites of the glenohumeral ligaments and their relationship to well-established anatomic landmarks. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 10 nonpaired, fresh-frozen human cadaveric shoulders were included in this study. A 3-dimensional coordinate measuring device was used to quantify the location of pertinent bony landmarks and soft tissue attachment areas. All subcutaneous tissues and musculature were removed, with the exception of the rotator cuff (respective muscle bellies cut at their musculotendinous junctions) and the long head of the biceps tendon. The superior glenohumeral ligament (SGHL), middle glenohumeral ligament (MGHL), anteroinferior glenohumeral ligament (AIGHL), posteroinferior glenohumeral ligament (PIGHL), and coracohumeral ligament (CHL) were then transected. Coordinates of points along the perimeters of attachment sites were used to calculate areas, while coordinates of center points were used to determine distances between surgically relevant attachment sites and pertinent bony landmarks. RESULTS: The mean length of the SGHL humeral attachment along the intra-articular cartilage margin was 9.5 ± 3.2 mm, spanning from 12:55 to 1:40, while the SGHL glenoid attachment to the labrum was 1.9 ± 1.2 mm medial to the most lateral extent of the labral rim, spanning from 12:30 to 12:45. The mean length of the MGHL attachment along the intra-articular cartilage margin was 16.4 ± 3.0 mm, equating to 2:10 to 3:35 on the humeral head clockface, and the glenoid attachment was confluent with the labrum, attaching 1.5 ± 1.0 mm medial to the most lateral extent of the labral rim and thus extending from 1:50 to 2:35 on the glenoid clockface. The mean length of the AIGHL attachment along the intra-articular cartilage margin was 12.0 ± 3.0 mm, spanning from 4:05 to 5:10 on the humeral head clockface. The AIGHL bony footprint on the glenoid neck was 48.4 ± 24.5 mm2. The confluent attachment of the AIGHL to the labrum was 1.2 ± 0.9 mm medial to the most lateral extent of the labral rim, corresponding to 3:30 to 4:05 on the glenoid clockface. The mean length of the PIGHL attachment along the intra-articular cartilage margin was 12.0 ± 1.4 mm, spanning from 7:40 to 8:50 on the humeral head clockface. The PIGHL attachment to the labrum was 1.2 ± 0.5 mm medial to the most lateral extent of the labral rim. This attachment to the labrum was calculated to span from 7:35 to 8:50 on the glenoid clockface. The mean length of the CHL origin from the coracoid was 12.9 mm, with its most anterior point located a mean of 14.1 mm from the tip of the coracoid. The mean length of the CHL attachment along the intra-articular cartilage margin was 10.0 ± 4.0 mm, spanning from 11:55 to 12:40 on the humeral head clockface. CONCLUSION: Glenohumeral ligaments were consistently identified in all specimens with minor anatomic variability for the SGHL, MGHL, AIGHL, and PIGHL. Important landmarks including the cartilage surface of the humerus, the bicipital groove, and the clockface can be utilized intraoperatively when attempting anatomic repair of these structures. CLINICAL RELEVANCE: There are multiple open and arthroscopic shoulder procedures that rely on anatomic restoration of these static stabilizers to provide optimal shoulder function and prevent recurrent instability. The qualitative descriptions are comparable with current literature; however, this study is the first to quantify the glenohumeral capsular and ligamentous attachments. The data provided allow for reliable landmarks to be established from known bony and soft tissue structures.

Validity of computed tomographic measurements and morphological comparison of cubital tunnel in idiopathic cubital tunnel syndrome.

BACKGROUND: Ulnar neuropathy is a common reason for referral to hand surgeons, and 10 to 30% of cubital tunnel syndrome (CuTS) is idiopathic. We hypothesized that the cause of idiopathic CuTS is in the bony structure. METHODS: We analyzed 79 elbows (39 idiopathic CuTS and 40 without CuTS symptom) using computed tomography and Materialize Mimics software to compare the differences between the two groups. We proposed a new bony cubital tunnel with a new boundary that could play a role in ulnar nerve compression symptom. RESULTS: The mean cubital tunnel volume was 1245.6 mm3 in all patients, 1180.6 mm3 in CuTS patients, and 1282.3 mm3 in the control group. A significant difference (p = 0.015) between two groups was found. Bony cubital tunnel cross-sectional area, cubital tunnel depth, and cubital tunnel angle also showed significant differences. CONCLUSION: The shape of the bony cubital tunnel is an important cause of CuTS, and the normal variation of the volume and cross-sectional area of the cubital tunnel and cubital tunnel angle could influence the occurrence of idiopathic CuTS.

Biomechanical analysis of the humeral head coverage, glenoid inclination and acromio-glenoidal height as isolated components of the critical shoulder angle in a dynamic cadaveric shoulder model.

BACKGROUND: The Critical Shoulder Angle was introduced as a combined radiographic surrogate parameter reflecting the influence of the morphological characteristics of the scapula on the development of degenerative shoulder disease such as rotator cuff tears and osteoarthritis. Although, glenoid inclination and lateral extension of the acromion were studied in biomechanical models separately, no investigation included all three individual parameters that determine the Critical Shoulder Angle: glenoid inclination, acromial coverage and acromial height in one cadaveric study protocol. METHODS: Three proximal humerus cadavers were attached to a robotic shoulder simulator which allowed for independent change of either lateral acromial coverage, glenoid inclination or acromial height. Combined dynamic scapula-thoracic and glenohumeral abduction up to 60° with different Critical Shoulder Angle configurations was performed and muscle forces as well as joint reaction forces were recorded. FINDINGS: All three components had an effect on either muscle forces and or joint reaction forces. While glenoid inclination showed the highest impact on joint stability with increasing upward-tilting causing cranial subluxation, changing of the lateral acromial coverage or acromial height had less influence on stability but showed significant alteration of joint reaction forces. INTERPRETATION: All three components of the Critical Shoulder Angle, glenoid inclination, lateral acromial extension and acromial height showed independent biomechanical effects when changed isolated. However, glenoid inclination seems to have the largest impact regarding joint stability.

Navigation-assisted suture anchor insertion for arthroscopic rotator cuff repair.

BACKGROUND: Suture anchor placement for subscapularis repair is challenging. Determining the exact location and optimum angle relative to the subscapularis tendon direction is difficult because of the mismatch between a distorted arthroscopic view and the actual anatomy of the footprint. This study aimed to compare the reliability and reproducibility of the navigation-assisted anchoring technique with conventional arthroscopic anchor fixation. METHODS: Arthroscopic shoulder models were tested by five surgeons. The conventional and navigation-assisted methods of suture anchoring in the subscapularis footprint on the humeral head were tested by each surgeon seven times. Angular results and anchor locations were measured and compared using the Wilcoxon signed rank test. Interobserver intraclass correlation coefficients (ICCs) were analyzed among the surgeons. RESULTS: The mean angular errors of the targeted anchor fixation guide without and with navigation were 17° and 2° (p < 0.05), respectively, and the translational errors were 15 and 3 mm (p < 0.05), respectively. All participants showed a narrow range of anchor fixation angular and translational errors from the original target. Among the surgeons, the interobserver reliabilities of angular errors for ICCs of the navigation-assisted and conventional methods were 0.897 and 0.586, respectively, and the interobserver ICC reliabilities for translational error were 0.938 and 0.619, respectively. CONCLUSIONS: The navigation system may help surgeons be more aware of the surrounding anatomy and location, providing better guidance for anchor orientation, including footprint location and anchor angle.

Humeral Head Morphometry Can Predict the Presence of Subacromial Spurs: Measurements of Dried Bones from Human Shoulder Girdles.

OBJECTIVE: To clarify the relationship between the morphological characteristics of the bones of the shoulder girdle and the presence of subacromial spurs (SS). METHODS: The bones of 36 cadaveric shoulder girdles were measured. After dividing the bone specimens into SS present and absent groups, various bone parameters between the two groups were statistically compared. Logistic regression analysis was conducted to assess the significance of each parameter as a predictor of SS formation. A receiver operating characteristic curve analysis was used to determine the cut-off point and to assess the sensitivity and specificity of the parameters showing significant differences. RESULTS: SS were found in 16 scapulae. The values for five parameters of the examined shoulder girdles were significantly different between the two groups. The presence of SS depended on the humeral head ratio, which was calculated by dividing the length of the greater tubercle of the humerus by the length of the lesser tubercle. A cut-off value of 1.97 was suitable for discriminating between the presence and absence of SS (sensitivity, 75%; specificity, 80%). CONCLUSION: The presence of SS is related to several morphological characteristics of the shoulder girdle and, the presence of SS can be predicted using humeral head morphometry.

A Detailed Analysis of the Blood Supply to the Subscapularis Muscle.

This study aimed to provide a comprehensive description of the arterial supply to the subscapularis (SSC) muscle. This will provide critical information for various surgical procedures. Ten specimens of embalmed Korean cadavers were dissected and subjected to modified Sihler's method to reveal the branching pattern of the arteries surrounding the subscapularis, and its intramuscular blood supply. The SSC muscle was generally supplied by branches from the subclavian artery (suprascapular artery, supraSA; circumflex scapular artery, CxSA; and dorsal scapular artery, dSA) and the axillary artery (subscapular artery, subSA; lateral thoracic artery, LTA; posterior circumflex humeral artery, PCxHA; and a branch of the axillary artery, AAbr). The anterior aspect of the muscle was supplied by the subSA, LTA, CxSA, supraSA, and AAbr. The posterior aspect of the muscle was supplied by the supraSA, PCxHA, and subSA. The dSA was more scarcely distributed than the other arteries. In two cases, the dSA supplied the portion of the muscle near the medial border of the scapular. The anterior side of the muscle tendon was supplied by the CxSA, and its posterior side was supplied by the PCxHA. The subSA can be considered to be the main branch supplying the SSA based on its distribution area of arteries. It was mostly situated within the lower region of the SSC. After distributing to the anterior surface of the SSC, some branches of the subSA reached the posterior surface as perforating branches. Clin. Anat. 32:642-647, 2019. © 2019 Wiley Periodicals, Inc.

A case of biceps brachii accessory humeral head associated with variant musculocutaneous and median nerve communications with clinical implications

We present a unique case of an accessory head to the biceps brachii arising from the humerus accompanied by bilateral connections of the musculocutaneous and median nerves identified during routine anatomical dissection in the anatomy lab of Rush University. On the left side, the accessory head attached proximally to the anteromedial surface of the midshaft humerus and joined the rest of the muscle via the common biceps tendon to attach distally onto the radius. It was innervated by a separate branch of the musculocutaneous nerve. Bilaterally, both connections between the musculocutaneous and median nerves occurred distal to the traditional contribution from the lateral cord of the brachial plexus. On the right side, the musculocutaneous nerve pierced the substance of the coracobrachialis muscle before giving a branch to innervate the biceps brachii muscle. These variations have clinical relevance for surgeons operating in the region and any clinician investigating peripheral nerve symptoms in the arm

No disponible

Complex variation of trabecular bone structure in the proximal humerus and femur of five modern human populations.

OBJECTIVE: This project investigates trabecular bone structural variation in the proximal humerus and femur of hunter-gatherer, mixed-strategy agricultural, medieval, and human groups to address three questions: (a) What is the extent of trabecular bone structural variation in the humerus and femur between populations with different inferred activity levels? (b) How does variation in the proximal humerus relate to variation in the proximal femur? (c) Are trabecular bone microstructural variables sexually dimorphic? METHODS: The proximal humerus and femur of 73 adults from five human groups with distinct subsistence strategies were scanned using a micro-computed tomography system. Centralized volumes of interest within the humeral and femoral heads were extracted and analyzed to quantify bone volume fraction, trabecular thickness, trabecular separation, connectivity density, degree of anisotropy, and bone surface density. RESULTS: In the humerus and femur, groups with the highest inferred activity levels have higher bone volume fraction and trabecular thickness, and lower bone surface density than those with lower inferred activity levels. However, the humeral pattern does not exactly mirror that of the femur, which demonstrates a steeper gradient of difference between subsistence groups. No significant differences were identified in trabecular separation. No consistent patterns of sexual dimorphism were present in the humerus or femur. CONCLUSIONS: Reduced skeletal robusticity of proximal humeral and femoral trabecular bone corresponds with reduced activity level inferred from subsistence strategy. However, human trabecular bone structural variation is complex and future work should explore how other factors (diet, climate, genetics, disease load, etc.), in addition to activity, influence bone structural variation.

Surface damage of bovine articular cartilage-off-bone: the effect of variations in underlying substrate and frequency.

BACKGROUND: Changes in bone mineral density have been implicated with the onset of osteoarthritis, but its role in inducing failure of articular cartilage mechanically is unclear. This study aimed to determine the effect of substrate density, as the underlying bone, on the surface damage of cartilage-off-bone, at frequencies associated with gait, and above. METHODS: Bovine articular cartilage samples were tested off-bone to assess induced damage with an indenter under a compressive sinusoidal load range of 5-50 N at frequencies of 1, 10 and 50 Hz, corresponding to normal and above normal gait respectively, for up to 10,000 cycles. Cartilage samples were tested on four underlying substrates with densities of 0.1556, 0.3222, 0.5667 and 0.6000 g/cm3. India ink was applied to identify damage as cracks, measured across their length using ImageJ software. Linear regression was performed to identify if statistical significance existed between substrate density, and surface damage of articular cartilage-off-bone, at all three frequencies investigated (p < 0.05). RESULTS: Surface damage significantly increased (p < 0.05) with substrate density at 10 Hz of applied frequency. Crack length at this frequency reached the maximum of 10.95 ± 9.12 mm (mean ± standard deviation), across all four substrates tested. Frequencies applied at 1 and 50 Hz failed to show a significant increase (p > 0.05) in surface damage with an increase in substrate density, at which the maximum mean crack length were 3.01 ± 3.41 mm and 5.65 ± 6.54 mm, respectively. Crack formation at all frequencies tended to form at the periphery of the cartilage specimen, with multiple straight-line cracking observed at 10 Hz, in comparison to single straight-line configurations produced at 1 and 50 Hz. CONCLUSIONS: The effect of substrate density on the surface damage of articular cartilage-off-bone is multi-factorial, with an above-normal gait frequency. At 1 Hz cartilage damage is not associated with substrate density, however at 10 Hz, it is. This study has implications on the effects of the factors that contribute to the onset of osteoarthritis.

Arthroscopic anatomy of the middle glenohumeral ligament.

PURPOSE: The middle glenohumeral ligament (MGHL) has seldom been studied and its function is unknown. The aim of this study was to describe its anatomical presentations. METHODS: A prospective study was conducted of MGHL anatomy in 107 arthroscopies, with a description of its shape and superior and inferior insertion in the articular surface of the subscapularis tendon. The MGHL was investigated dynamically during internal rotation of the glenohumeral joint. RESULTS: Sixty-three percent (68/107) of the MGHLs were found to be leaf-like, and 27% (28/107) cord-like, 5.5% (6/107) vestigial, and 2% (2/107) had several strands. The MGHL was absent for 2% of patients (2/107). The inferior insertion point of the MGHL was lateral, masked by the humeral head, in 34% of cases (36/105), intermediate, in front of the glenohumeral joint line, in 57% of cases (60/105), and medial, in front of the labrum, in 9% of cases (9/105). During internal rotation, 46% (48/105) of the MGHLs were observed to retract medially, the subscapularis tendon moving away from the anterior glenoid rim, while 54% (57/105) remained visible in front of the glenohumeral joint and came into contact with the articular surface of the subscapularis tendon. CONCLUSIONS: The MGHL has many anatomical variations.

A Novel Method for the Approximation of Humeral Head Retrotorsion Based on Three-Dimensional Registration of the Bicipital Groove.

BACKGROUND: The accurate restoration of premorbid anatomy is key for the success of reconstructive surgeries of the proximal part of the humerus. The bicipital groove has been proposed as a landmark for the prediction of humeral head retrotorsion. We hypothesized that a novel method based on bilateral registration of the bicipital groove yields an accurate approximation of the premorbid anatomy of the proximal part of the humerus. METHODS: Three-dimensional (3D) triangular surface models were created from computed tomographic data of 100 paired humeri (50 cadavers). Segments of the distal part of the humerus and the humeral shaft of prespecified lengths were defined. A surface registration algorithm was applied to superimpose the models onto the mirrored contralateral humeral model based on the defined segments. We evaluated the 3D proximal humeral contralateral registration (p-HCR) errors, defined as the difference in 3D rotation of the humeral head between the models when superimposed. For comparison, we quantified the landmark-based retrotorsion (LBR) error, defined as the intra-individual difference in retrotorsion, measured with a landmark-based 3D method. RESULTS: The mean 3D p-HCR error using the most proximal humeral shaft (bicipital groove) segment for the registration was 2.8° (standard deviation [SD], 1.5°; range, 0.6° to 7.4°). The mean LBR error of the reference method was 6.4° (SD, 5.9°; range, 0.5° to 24.0°). CONCLUSIONS: Bilateral 3D registration of the bicipital groove is a reliable method for approximating the premorbid anatomy of the proximal part of the humerus. CLINICAL RELEVANCE: The accurate approximation of the premorbid anatomy is a key for the successful restoration of the premorbid anatomy of the proximal part of the humerus.

Systemic patterns of trabecular bone across the human and chimpanzee skeleton.

Aspects of trabecular bone architecture are thought to reflect regional loading of the skeleton, and thus differ between primate taxa with different locomotor and postural modes. However, there are several systemic factors that affect bone structure that could contribute to, or be the primary factor determining, interspecific differences in bone structure. These systemic factors include differences in genetic regulation, sensitivity to loading, hormone levels, diet, and activity levels. Improved understanding of inter-/intraspecific variability, and variability across the skeleton of an individual, is required to interpret properly potential functional signals present within trabecular structure. Using a whole-region method of analysis, we investigated trabecular structure throughout the skeleton of humans and chimpanzees. Trabecular bone volume fraction (BV/TV), degree of anisotropy (DA) and trabecular thickness (Tb.Th) were quantified from high resolution micro-computed tomographic scans of the humeral and femoral head, third metacarpal and third metatarsal head, distal tibia, talus and first thoracic vertebra. We found that BV/TV is, in most anatomical sites, significantly higher in chimpanzees than in humans, suggesting a systemic difference in trabecular structure unrelated to local loading regime. Differences in BV/TV between the forelimb and hindlimb did not clearly reflect differences in locomotor loading in the study taxa. There were no clear systemic differences between the taxa in DA and, as such, this parameter might reflect function and relate to differences in joint loading. This systemic approach reveals both the pattern of variability across the skeleton and between taxa, and helps identify those features of trabecular structure that may relate to joint function.