RESUMO
Advanced cooling systems can be deployed to enhance the resilience of thermoelectric power generation systems. This study developed and applied a new power plant modeling option for a hybrid cooling system at coal- or natural-gas-fired power plants with and without amine-based carbon capture and storage (CCS) systems. The results of the plant-level analyses show that the performance and cost of hybrid cooling systems are affected by a range of environmental, technical, and economic parameters. In general, when hot periods last the entire summer, the wet unit of a hybrid cooling system needs to share about 30% of the total plant cooling load in order to minimize the overall system cost. CCS deployment can lead to a significant increase in the water use of hybrid cooling systems, depending on the level of CO2 capture. Compared to wet cooling systems, widespread applications of hybrid cooling systems can substantially reduce water use in the electric power sector with only a moderate increase in the plant-level cost of electricity generation.
Assuntos
Sequestro de Carbono , Carbono/análise , Carvão Mineral/economia , Gás Natural/economia , Centrais Elétricas/economia , Centrais Elétricas/instrumentação , Ar , Dióxido de Carbono/análiseRESUMO
To solve the water wall overheating in lower furnace, and further reduce NOx emissions and carbon in fly ash, continuous improvement of the previously proposed multiple injection and multiple staging combustion (MIMSC) technology lies on three aspects: (1) along the furnace arch breadth, changing the previously centralized 12 burner groups into a more uniform pattern with 24 burners; (2) increasing the mass ratio of pulverized coal in fuel-rich flow to that in fuel-lean flow from 6:4 to 9:1; (3) reducing the arch-air momentum by 23% and increasing the tertiary-air momentum by 24%. Industrial-size measurements (i.e., adjusting overfire air (OFA) damper opening of 20-70%) uncovered that, compared with the prior MIMSC technology, the ignition distance of fuel-rich coal/air flow shortened by around 1 m. The gas temperature in the lower furnace was symmetric and higher, the flame kernel moved upward and therefore made the temperature in near-wall region of furnace hopper decrease by about 400 °C, the water wall overheating disappeared completely. Under the optimal OFA damper opening (i.e, 55%), NOx emissions and carbon in fly ash attained levels of 589 mg/m(3) at 6% O2 and 6.18%, respectively, achieving NOx and carbon in fly ash significant reduction by 33% and 37%, respectively.
Assuntos
Poluição do Ar/prevenção & controle , Centrais Elétricas/instrumentação , Carbono/análise , Carvão Mineral , Cinza de Carvão , Indústrias , Tecnologia , TemperaturaRESUMO
Power system oscillation is a serious threat to the stability of multimachine power systems. The coordinated control of power system stabilizers (PSS) and thyristor-controlled series compensation (TCSC) damping controllers is a commonly used technique to provide the required damping over different modes of growing oscillations. However, their coordinated design is a complex multimodal optimization problem that is very hard to solve using traditional tuning techniques. In addition, several limitations of traditionally used techniques prevent the optimum design of coordinated controllers. In this paper, an alternate technique for robust damping over oscillation is presented using backtracking search algorithm (BSA). A 5-area 16-machine benchmark power system is considered to evaluate the design efficiency. The complete design process is conducted in a linear time-invariant (LTI) model of a power system. It includes the design formulation into a multi-objective function from the system eigenvalues. Later on, nonlinear time-domain simulations are used to compare the damping performances for different local and inter-area modes of power system oscillations. The performance of the BSA technique is compared against that of the popular particle swarm optimization (PSO) for coordinated design efficiency. Damping performances using different design techniques are compared in term of settling time and overshoot of oscillations. The results obtained verify that the BSA-based design improves the system stability significantly. The stability of the multimachine power system is improved by up to 74.47% and 79.93% for an inter-area mode and a local mode of oscillation, respectively. Thus, the proposed technique for coordinated design has great potential to improve power system stability and to maintain its secure operation.
Assuntos
Algoritmos , Centrais Elétricas/instrumentação , Fontes de Energia Elétrica , Desenho de Equipamento , HumanosRESUMO
The current situation and possible future developments for nuclear power--including fission and fusion processes--is presented. The fission nuclear power continues to be an essential part of the low-carbon electricity generation in the world for decades to come. There are breakthrough possibilities in the development of new generation nuclear reactors where the life-time of the nuclear waste can be reduced to some hundreds of years instead of the present time-scales of hundred thousand of years. Research on the fourth generation reactors is needed for the realisation of this development. For the fast nuclear reactors, a substantial research and development effort is required in many fields--from material sciences to safety demonstration--to attain the envisaged goals. Fusion provides a long-term vision for an efficient energy production. The fusion option for a nuclear reactor for efficient production of electricity has been set out in a focussed European programme including the international project of ITER after which a fusion electricity DEMO reactor is envisaged.
Assuntos
Fontes Geradoras de Energia , Reatores Nucleares , Centrais Elétricas , Eletricidade , Fontes Geradoras de Energia/classificação , Reatores Nucleares/instrumentação , Centrais Elétricas/instrumentaçãoRESUMO
The work presented here reports the first study in which the speciation, behaviour and fate of mercury (Hg) have been evaluated under oxy-fuel combustion at the largest oxy-Pulverised Coal Combustion (oxy-PCC) demonstration plant to date during routine operating conditions and partial exhaust flue gas re-circulation to the boiler. The effect of the CO2-rich flue gas re-circulation on Hg has also been evaluated. Results reveal that oxy-PCC operational conditions play a significant role on Hg partitioning and fate because of the continuous CO2-rich flue gas re-circulations to the boiler. Mercury escapes from the cyclone in a gaseous form as Hg(2+) (68%) and it is the prevalent form in the CO2-rich exhaust flue gas (99%) with lower proportions of Hg(0) (1.3%). The overall retention rate for gaseous Hg is around 12%; Hg(0) is more prone to be retained (95%) while Hg(2+) shows a negative efficiency capture for the whole installation. The negative Hg(2+) capture efficiencies are due to the continuous CO2-rich exhaust flue gas recirculation to the boiler with enhanced Hg contents. Calculations revealed that 44mg of Hg were re-circulated to the boiler as a result of 2183 re-circulations of CO2-rich flue gas. Especial attention must be paid to the role of the CO2-rich exhaust flue gas re-circulation to the boiler on the Hg enrichment in Fly Ashes (FAs).
Assuntos
Poluentes Atmosféricos/análise , Monitoramento Ambiental/métodos , Incêndios , Mercúrio/análise , Oxigênio/química , Centrais Elétricas , Desenho de Equipamento , Gases/análise , Gases/isolamento & purificação , Centrais Elétricas/instrumentaçãoRESUMO
The Environmental Impact Assessment of reservoir construction can be viewed as a new strategic perspective for the economic development of a region. Based on the principles of a watershed approach a interdisciplinary and multidisciplinary systemic view including biogeophysiographical, economic and socio environmental studies the new vision of a EIA provides a basic substratum for the restoration economy and an advanced model for the true development much well ahead of the modernization aspects of the project of a reservoir construction.
Assuntos
Monitorização de Parâmetros Ecológicos , Ecossistema , Centrais Elétricas , Rios , Brasil , Centrais Elétricas/economia , Centrais Elétricas/instrumentaçãoRESUMO
In this paper the authors describe the limnological approaches, the sampling methodology, and strategy adopted in the study of the Xingu River in the area of influence of future Belo Monte Power Plant. The river ecosystems are characterized by unidirectional current, highly variable in time depending on the climatic situation the drainage pattern an hydrological cycle. Continuous vertical mixing with currents and turbulence, are characteristic of these ecosystems. All these basic mechanisms were taken into consideration in the sampling strategy and field work carried out in the Xingu River Basin, upstream and downstream the future Belo Monte Power Plant Units.
Assuntos
Monitorização de Parâmetros Ecológicos/métodos , Ecossistema , Centrais Elétricas , Rios , Brasil , Monitorização de Parâmetros Ecológicos/instrumentação , Centrais Elétricas/instrumentaçãoAssuntos
Secas , Inundações , Rios/química , Qualidade da Água , Brasil , Centrais Elétricas/instrumentação , Estações do AnoRESUMO
A novel combustion system was applied to a 600 MWe Foster Wheeler (FW) down-fired pulverized-coal utility boiler to solve high NOx emissions, without causing an obvious increase in the carbon content of fly ash. The unit included moving fuel-lean nozzles from the arches to the front/rear walls and rearranging staged air as well as introducing separated overfire air (SOFA). Numerical simulations were carried out under the original and novel combustion systems to evaluate the performance of combustion and NOx emissions in the furnace. The simulated results were found to be in good agreement with the in situ measurements. The novel combustion system enlarged the recirculation zones below the arches, thereby strengthening the combustion stability considerably. The coal/air downward penetration depth was markedly extended, and the pulverized-coal travel path in the lower furnace significantly increased, which contributed to the burnout degree. The introduction of SOFA resulted in a low-oxygen and strong-reducing atmosphere in the lower furnace region to reduce NOx emissions evidently. The industrial measurements showed that NOx emissions at full load decreased significantly by 50%, from 1501 mg/m3 (O2 at 6%) to 751 mg/m3 (O2 at 6%). The carbon content in the fly ash increased only slightly, from 4.13 to 4.30%.
Assuntos
Poluentes Atmosféricos/análise , Carvão Mineral , Recuperação e Remediação Ambiental/métodos , Nitratos/análise , Nitritos/análise , Centrais Elétricas/instrumentação , Simulação por Computador , Análise Numérica Assistida por Computador , Oxigênio/análise , Reprodutibilidade dos Testes , TemperaturaRESUMO
In this paper the authors describe the limnological approaches, the sampling methodology, and strategy adopted in the study of the Xingu River in the area of influence of future Belo Monte Power Plant. The river ecosystems are characterized by unidirectional current, highly variable in time depending on the climatic situation the drainage pattern an hydrological cycle. Continuous vertical mixing with currents and turbulence, are characteristic of these ecosystems. All these basic mechanisms were taken into consideration in the sampling strategy and field work carried out in the Xingu River Basin, upstream and downstream the future Belo Monte Power Plant Units.
Neste trabalho os autores descrevem as abordagens limnológicas e a metodologia e estratégia de amostragem adotadas no estudo do Rio Xingu, na área de influência da futura Usina da Belo Monte (UHE Belo Monte). O ecossistema de rios é caracterizado por velocidade unidirecional de correntes, muitas flutuações de fluxos dependendo do clima do padrão de drenagem e do ciclo hidrológico. Mistura vertical permanente e turbulências ocorrem constantemente devido a correntes predominantes. Todos estes mecanismos gerais e específicos característicos do Rio Xingu, foram levados em consideração no plano de estudos limnológicos e amostragens desenvolvidas na área de influência de UHE Belo Monte a montante e a jusante do futuro empreendimento.
Assuntos
Centrais Elétricas , Ecossistema , Monitorização de Parâmetros Ecológicos/métodos , Rios , Brasil , Centrais Elétricas/instrumentação , Monitorização de Parâmetros Ecológicos/instrumentaçãoRESUMO
The Environmental Impact Assessment of reservoir construction can be viewed as a new strategic perspective for the economic development of a region. Based on the principles of a watershed approach a interdisciplinary and multidisciplinary systemic view including biogeophysiographical, economic and socio environmental studies the new vision of a EIA provides a basic substratum for the restoration economy and an advanced model for the true development much well ahead of the modernization aspects of the project of a reservoir construction.
A Avaliação de Impacto Ambiental (AIA) de reservatórios em construção deve ser considerada como uma nova perspectiva estratégica para o desenvolvimento regional muito mais avançada do que a modernização produzida pela infraestrutura. Baseada no princípio de abordagem sistêmica, interdisciplinar e multidisciplinar incluindo a base biogeofisiográfica, e estudo sócio ambientais, a nova visão da AIA promove um substrato básico para a economia da restauração e para um nível avançado de desenvolvimento muito além do mero processo de modernização produzido pela construção do reservatório. Estas mudanças de paradigma conceitual em governança, economia e sustentabilidade são fundamentais para o desenvolvimento avançado do país.