Advanced oxidation and a metrological strategy based on CLC-MS for the removal of pharmaceuticals from pore & surface water.

In this work, it is studied the photolysis, electrolysis, and photo-electrolysis of a mixture of pharmaceutics (sulfadiazine, naproxen, diclofenac, ketoprofen and ibuprofen) contained in two very different types of real water matrices (obtained from surface and porewater reservoirs), trying to clarify the role of the matrix on the degradation of the pollutants. To do this, a new metrological approach was also developed for screening of pharmaceuticals in waters by capillary liquid chromatography mass spectrometry (CLC-MS). This allows the detection at concentrations lower than 10 ng mL-1. Results obtained in the degradation tests demonstrate that inorganic composition of the water matrix directly influences on the efficiency of the drugs removal by the different EAOPs and better degradation results were obtained for experiments carried out with surface water. The most recalcitrant drug studied was ibuprofen for all processes evaluated, while diclofenac and ketoprofen were found to be the easiest drugs for being degraded. Photo-electrolysis was found to be more efficient than photolysis and electrolysis, and the increase in the current density was found to attain a slight improvement in the removal although with an associated huge increase in the energy consumption. The main reaction pathways for each drug and technology were also proposed.

Pharmaceuticals and personal care products (PPCPs) in water, sediment and freshwater mollusks of the Dongting Lake downstream the Three Gorges Dam.

Pharmaceuticals and personal care products (PPCPs) are a group of emerging anthropogenic pollutants. Here we investigated the occurrence and concentrations of 35 typical PPCPs in water, sediment, and freshwater mollusks (Hyriopsis cumingii, Unio douglasiae, Sinanodonta woodiana, Lamprotula leai and Corbicula fluminea) of the Dongting Lake downstream of the Three Gorges Dam. As results, 33 PPCPs were detected in water and sediment of the lake. Ketoprofen (not detected (ND)-292.8 ng/L, mean 91.1 ng/L) and roxithromycin (13.7-141.9 ng/L, mean 30.4 ng/L) were the primary PPCPs measured in lake water, while ibuprofen (ND-105.0 ng/g, mean 30.0 ng/g) and ketoprofen (ND-142.9 ng/g, mean 27.6 ng/g) were dominant in the sediment. Distinct seasonal difference in PPCP compositions was observed in both water and sediment of the Dongting Lake, potentially associated with the water-level fluctuations driven by the Three Gorges Dam operations. Ketoprofen and ibuprofen were also frequently detected in the soft tissues of freshwater mollusks, with concentrations of 42.5-1206.6 and 44.9-992.7 ng/g, respectively. Significant species-specific accumulation characteristics of PPCPs in mollusks were observed, with the highest total contents being reported for Corbicula fluminea (3.18 ± 1.13 µg/g). Moreover, gonads of mollusks were identified as the target organ to accumulate these compounds. Correlation analysis further revealed the strong associations of PPCP concentrations in mollusks with those in water and sediment, suggesting the importance of controlling dissolved and sedimentary bioavailability of PPCPs for ecological risk management in this freshwater lake ecosystems.

Core-shell MOF@COFs used as an adsorbent and matrix for the detection of nonsteroidal anti-inflammatory drugs by MALDI-TOF MS.

A core-shell material (UiO@TapbTp) has been developed as an adsorbent and matrix to detect nonsteroidal anti-inflammatory drugs (NSAIDS) by matrix laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) in complex samples. The hybrid material is prepared by growing covalent organic framework (COF, TapbTp) layers in situ on an amino-modified metal-organic framework (MOF, UiO-66-NH2). The combination of the MOF and COF overcomes their individual shortcomings and integrates both of their advantages. Compared with the bare COF and MOF, the core-shell composite exhibits improved enrichment ability and matrix performance. With the help of pre-enrichment under optimized conditions, the limits of detection (LODs) for ketoprofen, naproxen, and aspirin are reduced by nearly 1000 times, with values of 0.001 mg L-1, 0.010 mg L-1, and 0.001 mg L-1, respectively, and the relative standard deviations (RSDs) are all below 12.35%. The good recoveries (84.8-118%) in (spiked) saliva and environmental water sample further verify the applicability of the method in complex samples.

Chitosan Film as Eco-Friendly and Recyclable Bio-Adsorbent to Remove/Recover Diclofenac, Ketoprofen, and their Mixture from Wastewater.

This paper reported the first example on the use of chitosan films, without further modification, to remove and recover, through bio-sorption processes, the emerging pollutant Diclofenac from water. The latter was adopted as a model, among non-steroidal anti-inflammatory drugs, by obtaining a maximum adsorption capacity, qmax, on chitosan of about 10 mg/g, under the applied experimental conditions of work. The literature gap about the use of chitosan films, which was already used for dyes and heavy metals removal, to adsorb emerging pollutants from water was covered, claiming the wide range application of chitosan films to remove a different class of pollutants. Several parameters affecting the Diclofenac adsorption process, such as the pH and ionic strength of solutions containing Diclofenac, the amount of the bio-sorbent and pollutant, and the temperature values, were investigated. The kinetics and the adsorption isotherms, along with the thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also evaluated. The process occurred very efficiently, and Chitosan/Diclofenac amounts dependent, remove about the 90% of the pollutant, in 2 h, from the tested solutions, through electrostatic interaction involving the carboxylic moiety of Diclofenac and Chitosan amino groups. This finding was confirmed by the pH and salt effects on the bio-sorption process, including swelling measurements of Chitosan films and by FTIR-ATR analysis. In detail, the maximum adsorption was observed at pH 5, when pollutant and Chitosan were negatively and positively charged, respectively. By reducing or increasing the pH around this value, a reduced affinity was observed. Accordingly, the presence of salts retarded the Diclofenac removal screening its charges, which hinders the interaction with Chitosan. The sorption was spontaneous (ΔG° < 0) and endothermic (ΔH° > 0) following the pseudo-second order kinetic model. The process was Diclofenac and Chitosan amount dependent. In addition, the Freundlich and Temkin isotherms well described the process, which showed the heterogeneous character of the process. Experiments of the complete desorption were also performed by using NaCl solutions 0.25 M (like sea water salt concentration) proposing the reuse of the pollutant and the recycling of the bio-sorbent lowering the associated costs. The versatility of the adsorbent was reported by exploring the possibility to induce the Diclofenac light-induced degradation after the adsorption and by-products adsorption onto chitosan films. To emphasize the chitosan capacity of treating water, the removal of another pollutant such as Ketoprofen and the mixture of Diclofenac and Ketoprofen were investigated. In this way, a green and eco-friendly production-pollution prevention technology for removing emerging pollutants from water was presented, which reduced the overall environmental impact. This illustrated experiments both in static and dynamic conditions for potential industrial applications.

Determination of related substances in ketoprofen injection by RP-HPLC method.

The paper aims to establish a RP-HPLC method for the simultaneous determination of six related substances in ketoprofen injection. The separation was performed on a VP-ODS C18 column (4.6mm×250mm, 5µm) with the mobile phase of 6.8% phosphate buffer solution (adjusted to pH3.5 with 85% phosphoric acid)-acetonitrile-water (2:43:55,v/v/v) at a flow rate of 1.2mL•min-1. The detection wavelength and the injection volume were set at 233nm and 20µL, respectively. Impurity A and C were calculated by external standard method. Main component self-compare method with calibration factor was used to calculate impurity B, D, E, F and main component self-compare method without calibration factor was used to calculate unspecified impurity. Related substances and degraded substances were completely separated from ketoprofen. For impurity A and C, the linear range of determination were separately 0.06 µg•mL-1 ~ 3.6µg•mL-1 and 0.036µg•mL-1 ~ 2.4µg•mL-1 with the correlation coefficient of 0.9999. The average recoveries (n=9) were 98.13% (RSD=0.35%) and 96.32% (RSD=0.43%). The precision and repeatability for method were good. With reference to ketoprofen (retention time =10.06 min), the relative retention time of impurity B, D, E, F were 0.71, 1.46, 0.59, 2.13, respectively, and the relative correction factors were 0.962, 0.938, 0.957, 0.960, respectively. Finally, determined that the contents of impurity A could not be more than 0.3%, any of the contents of impurity B, C, D, E, F and unspecified impurities could not be more than 0.2%, sum of the contents of impurities other than A and C couldn't be more than 0.5%. The method was proved to be simple, rapid, accurate, sensitive and suitable for the simultaneous determination of six related substances in ketoprofen injection.

Combustion fabrication of magnetic porous carbon as a novel magnetic solid-phase extraction adsorbent for the determination of non-steroidal anti-inflammatory drugs.

Based on a one-step combustion fabrication approach, a novel magnetic porous carbon (MPC) was fabricated using filter paper as porous carbon source and iron salts as magnetic precursors. The textural properties of the MPC were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), vibration sample magnetometer (VSM) and nitrogen absorption-desorption isotherms. The as-prepared MPC possessed a high specific surface area, a microstructure comprised of mesopores and strong magnetic response. It was employed as a magnetic solid-phase extraction (MSPE) adsorbent for the determination of three non-steroidal anti-inflammatory drugs (NSAIDs) in environmental water and biological samples coupled with high performance liquid chromatography (HPLC). The main parameters affecting extraction efficiency were investigated in detail and a satisfactory performance was obtained under the optimal conditions. The calibration curves were linear over the concentration ranging from 1 to 1200 µg L-1 for ketoprofen (KET) and 2-1200 µg L-1 for naproxen (NAP) and diclofenac (DCF) with determination coefficients (R2) between 0.9995 and 0.9997. The limits of detection (LODs) were in the range of 0.2-0.4 µg L-1. The intra- and inter-day relative standard deviations (RSDs) were less than 4.03% and 8.72%, respectively. The recoveries ranged from 84.67% to 113.73% with RSDs less than 7.76%. The satisfactory results confirmed the great potential of the novel MPC adsorbent for the extraction of NSAIDs from complex sample matrices.

Direct chromatographic study of the enantioselective biodegradation of ibuprofen and ketoprofen by an activated sludge.

The quantification of the enantiomeric fraction (EF) during the biodegradation process is essential for environmental risk assessment. In this paper the enantioselective biodegradation of ibuprofen, IBU, and ketoprofen, KET, two of the drugs most consumed, was evaluated. Biodegradation experiments were performed in batch mode using a minimal salts medium inoculated with an activated sludge (collected from a Valencian Waste Water Treatment Plant) and supplemented with the racemate of each compound. The inoculum activity was verified using fluoxetine as reference compound. The experimental conditions used (analyte concentration and volume of inoculum) were chosen according to OECD guidelines. In parallel, the optical density at 600 nm was measured to control the biomass growth and to connect it with enantioselectivity. Two RPLC methods for chiral separations of IBU and KET using polysaccharides-based stationary phases were developed. Novel calculations and adapted models, using directly the chromatographic peak areas as dependent variable, were proposed to estimate significant parameters related to the biodegradation process: biodegradation (BD) and EF values at given time, half-life times of (R)- and (S)-enantiomers, number of days to reach a complete BD and the minimum EF expected. The modelled BD and EF curves fitted adequately the data (R2 > 0.94). The use of these new equations provided similar results to those obtained using concentration data. However, the use of chromatographic peak areas data, eliminates the uncertainty associated to the use of the calibration curves. The results obtained in this paper indicate that an enantiorecognition towards IBU enantiomers by the microorganisms present in the activated sludge used in this study occurred, being the biodegradation of (R)-IBU higher than that of (S)-IBU. For KET, non-enantioselective biodegradation was observed.

Theoretical and experimental adsorption studies of sulfamethoxazole and ketoprofen on synthesized ionic liquids modified CNTs.

The adsorption of sulfamethoxazole (SMZ) and ketoprofen (KET) using carbon nanotubes (CNTs) and CNTs modified with ionic liquids (ILs) was investigated. Two ionic liquids (1-benzyl, 3-hexyl imidazolium, IL1 and 1-benzyl, 3-decahexyl imidazolium, IL2) were synthesized, and characterized by nuclear magnetic resonance (1H and 13C NMR) and high resolution-mass spectrometry (HR-MS). CNTs and modified CNTs were characterized using FT-IR, X-ray diffraction (XRD), surface area and porosity analysis, thermal gravimetric analysis (TGA), Zeta potential, Raman and scanning electron microscopy (SEM). Kinetics, isotherm and computational studies were carried out to determine the efficiency and adsorption mechanism of SMZ and KET on modified CNTs. A density functional theory (DFT) method was applied to shed more light on the interactions between the pharmaceutical compounds and the adsorbents at the molecular level. The effects of adsorbent dosage, concentration, solution pH, energetics and contact time of SMZ and KET on the adsorption process were investigated. The adsorption of SMZ and KET on CNTs and modified CNTs were pH dependent, and adsorption was best described by pseudo-second-order kinetics and the Freundlich adsorption isotherm. Ionic liquid modified CNTs showed improved adsorption capacities compared to the unmodified ones for both SMZ and KET, which is in line with the computational results showing performance order; CNT+KET/SMZ < CNT-ILs+SMZ < CNT-ILs+KET.

Magnetic sporopollenin-cyanopropyltriethoxysilane-dispersive micro-solid phase extraction coupled with high performance liquid chromatography for the determination of selected non-steroidal anti-inflammatory drugs in water samples.

A facile dispersive-micro-solid phase extraction (D-µ-SPE) method coupled with HPLC for the analysis of selected non-steroidal anti-inflammatory drugs (NSAIDs) in water samples was developed using a newly prepared magnetic sporopollenin-cyanopropyltriethoxysilane (MS-CNPrTEOS) sorbent. Sporopollenin homogenous microparticles of Lycopodium clavatum spores possessed accessible functional groups that facilitated surface modification. Simple modification was performed by functionalization with 3-cyanopropyltriethoxysilane (CNPrTEOS) and magnetite was introduced onto the biopolymer to simplify the extraction process. MS-CNPrTEOS was identified by infrared spectrometrywhile the morphology and the magnetic property were confirmed by scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM), respectively. To maximize the extraction performance of ketoprofen, ibuprofen, diclofenac and mefenamic acid using the proposed MS-CNPrTEOS, important D-µ-SPE parameters were comprehensively optimized. The optimum extraction conditions were sorbent amount, 40 mg; extraction time, 5 min; desorption time; 5 min; sample volume, 15 mL; sample pH 2.0; and salt addition, 2.5% (w/v). The feasibility of the developed method was evaluated using spiked tap water, lake water, river water and waste water samples. Results showed that ketoprofen and ibuprofen were linear in the range of 1.0-1000 µg L-1 whilst diclofenac and mefenamic acid were linear in the range 0.8-500 µg L-1. The results also showed good detection limits for the studied NSAIDs in the range of 0.21-0.51 µg L-1 and good recoveries for spiked water samples in the range of 85.1-106.4%. The MS-CNPrTEOS proved a promising dispersive sorbent and applicable to facile and rapid assay of NSAIDs in water samples.

Targeted eco-pharmacovigilance for ketoprofen in the environment: Need, strategy and challenge.

Implementing "targeted" eco-pharmacovigilance(EPV) which focuses on individual or specific pharmaceuticals on a prioritised basis is a feasible, economical and customized approach to reduce the environmental concentrations and risks of pharmaceuticals. Non-steroidal anti-inflammatory drugs(NSAIDs) remaining in environment are a kind of priority hazard substances, due to a notable case that diclofenac residues caused the loss of more than 99% of vultures across the Indian sub-continent. Ketoprofen, as another widely used NSAID with comparable or even higher global consumption than diclofenac, in the environment has been shown to present a potential risk to non-target terrestrial and aquatic species. Based on the review of 85 articles reporting the analyses of ketoprofen residues in environment since 2010, we found that this NSAID frequently present in various environmental compartments around the world. Therefore, it is urgent to implement EPV targeting ketoprofen pollution. Here, we provide some recommendations for implementing the targeted EPV for ketoprofen, including: Closely monitoring ketoprofen in the natural environment; Reducing the residues of ketoprofen through source control; Encouraging urine source separation and treatment; Limiting the application of veterinary ketoprofen; Designing and constituting a framework system of targeted EPV. But some challenges, such as ambiguity in the accountability of the main bodies responsible for continued monitoring of ketoprofen residues, the lack of optimized urine source separation scenarios and procedure, the need for detailed design and application schemes of the framework system of targeted EPV, etc. should be addressed.

Multifunctionalized mesoporous silica as an efficient reversed-phase/anion exchange mixed-mode sorbent for solid-phase extraction of four acidic nonsteroidal anti-inflammatory drugs in environmental water samples.

A mesoporous silica Santa Barbara Amorphous-15 (SBA-15) has been first functionalized with 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane (a silane with three amines) and then reacted with an excess of phenyl glycidyl ether to generate a mixed-mode anion-exchanger containing both anion-exchange (three amines) and reversed-phase (multiple ether-linked phenyls) functionalities in a single branched ligand. The resulting material has been characterized by scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption measurements, Fourier-transform infrared spectroscopy, and elemental analysis. The results obtained indicated a BET specific surface area (SBET) of 362.5m2g-1, a pore volume of 0.70cm3g-1 with a narrow pore size distribution centered at 6.6nm, and carbon and nitrogen contents of 28.30% and 2.84%, respectively. The dimensions of these particles (∼5µm diameter, ∼60µm length), their large surface areas, their high-density functionalities and anion-exchange mixed-mode characteristics make them very attractive for highly effective solid phase extraction (SPE) of acidic nonsteroidal anti-inflammatory drugs (NSAIDs). The important parameters on extraction efficiency including sample pH, breakthrough volume, type and volume of eluent were optimized. A simple and sensitive analytical method based on mixed-mode SPE coupled to high-performance liquid chromatography with ultraviolet detection (HPLC-UV) was developed and successfully applied to the analysis of four NSAIDs (ketoprofen, naproxen, diclofenac, and ibuprofen) in spiked real water samples with satisfactory recoveries (80.6-110.9%) and repeatability (relative standard deviation <11.3%, n=3). The limit of detections of four NSAIDs were 0.006-0.070µgL-1 for tap water, and 0.014-0.16µgL-1 for river water and wastewater, with the enrichment factors of 806-1109-fold.

Preparation of a reversed-phase/anion-exchange mixed-mode spherical sorbent by Pickering emulsion polymerization for highly selective solid-phase extraction of acidic pharmaceuticals from wastewater.

The present work represents a simple and effective preparation of a novel mixed-mode anion-exchange (MAX) sorbent based on porous poly[2-(diethylamino)ethyl methacrylate-divinylbenzene] (poly(DEAEMA-DVB)) spherical particles synthesized by one-step Pickering emulsion polymerization. The poly(DEAEMA-DVB) particles were quaternized with 1,4-butanediol diglycidyl ether (BDDE) followed by triethylamine (TEA) via epoxy-amine reaction to offer strong anion exchange properties. The synthesized MAX sorbent was characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, nitrogen adsorption-desorption measurements and elemental analysis. The MAX sorbent possessed regular spherical shape and narrow diameter distribution (15-35µm), a high IEC of 0.54meq/g, with carbon and nitrogen contents of 80.3% and 1.62%, respectively. Compared to poly(DEAEMA-DVB), the MAX sorbent exhibited decreased SBET (390.5 vs. 515.3m2g-1), pore volume (0.74 vs. 0.85cm3g-1) and pore size (16.8 vs. 17.3nm). Moreover, changes of N content for producing the MAX sorbent reveal a successful two-step quaternization, which can be highly related to such a high IEC. Finally, the MAX sorbent was successfully evaluated for selective isolation and purification of some selected acidic pharmaceuticals (ketoprofen, KEP; naproxen, NAP; and ibuprofen, IBP) from neutral (hydrocortisone, HYC), basic (carbamazepine, CAZ; amitriptyline, AMT) pharmaceuticals and other interferences in water samples using solid phase extraction (SPE). An efficient analytical method based on the MAX-based mixed-mode SPE coupled with HPLC-UV was developed for highly selective extraction and cleanup of acidic KEP, NAP and IBP in spiked wastewater samples. The developed method exhibited good sensitivity (0.009-0.085µgL-1 limit of detection), satisfactory recoveries (82.1%-105.5%) and repeatabilities (relative standard deviation < 7.9%, n=3).

Novel poly(ε-caprolactone)/gelatin wound dressings prepared by emulsion electrospinning with controlled release capacity of Ketoprofen anti-inflammatory drug.

In the present study, a single and binary Ketoprofen-loaded mats of ultrathin fibers were developed by electrospinning and their physical properties and drug release capacity was analyzed. The single mat was prepared by solution electrospinning of poly(ε-caprolactone) (PCL) with Ketoprofen at a weight ratio of 5wt%. This Ketoprofen-containing PCL solution was also used as the oil phase in a 7:3 (wt/wt) emulsion with gelatin dissolved in acidified water. The resultant stable oil-in-water (O/W) emulsion of PCL-in-gelatin, also containing Ketoprofen at 5wt%, was electrospun to produce the binary mat. Cross-linking process was performed by means of glutaraldehyde vapor on the electrospun binary mat to prevent dissolution of the hydrophilic gelatin phase. The performed characterization indicated that Ketoprofen was successfully embedded in the single and binary electrospun mats, i.e. PCL and PCL/gelatin, and both mats showed high hydrophobicity but poor thermal resistance. In vitro release studies interestingly revealed that, in comparison to the single PCL electrospun mat, the binary PCL/gelatin mat significantly hindered Ketoprofen burst release and exhibited a sustained release capacity of the drug for up to 4days. In addition, the electrospun Ketoprofen-loaded mats showed enhanced attachment and proliferation of L929 mouse fibroblast cells, presenting the binary mat the highest cell growth yield due to its improved porosity. The here-developed electrospun materials clearly show a great deal of potential as novel wound dressings with an outstanding controlled capacity to release drugs.

Development of a New Microextraction Fiber Combined to On-Line Sample Stacking Capillary Electrophoresis UV Detection for Acidic Drugs Determination in Real Water Samples.

A new analytical method coupling a (off-line) solid-phase microextraction with an on-line capillary electrophoresis (CE) sample enrichment technique was developed for the analysis of ketoprofen, naproxen and clofibric acid from water samples, which are known as contaminants of emerging concern in aquatic environments. New solid-phase microextraction fibers based on physical coupling of chromatographic supports onto epoxy glue coated needle were studied for the off-line preconcentration of these micropollutants. Identification and quantification of such acidic drugs were done by capillary zone electrophoresis (CZE) using ultraviolet diode array detection (DAD). Further enhancement of concentration sensitivity detection was achieved by on-line CE "acetonitrile stacking" preconcentration technique. Among the eight chromatographic supports investigated, Porapak Q sorbent showed higher extraction and preconcentration capacities. The screening of parameters that influence the microextraction process was carried out using a two-level fractional factorial. Optimization of the most relevant parameters was then done through a surface response three-factor Box-Behnken design. The limits of detection and limits of quantification for the three drugs ranged between 0.96 and 1.27 µg∙L-1 and 2.91 and 3.86 µg∙L-1, respectively. Recovery yields of approximately 95 to 104% were measured. The developed method is simple, precise, accurate, and allows quantification of residues of these micropollutants in Genil River water samples using inexpensive fibers.

Study of the simulated sunlight photolysis mechanism of ketoprofen: the role of superoxide anion radicals, transformation byproducts, and ecotoxicity assessment.

The aim of this study was to investigate the photolysis mechanism of ketoprofen (KET) under simulated sunlight. The results demonstrated that the photolysis of KET aligned well with pseudo first-order kinetics. Radical scavenging experiments and dissolved oxygen experiments revealed that the superoxide anion radical (O2˙-) played a primary role in the photolytic process in pure water. Bicarbonate slightly increased the photodegradation of KET through generating carbonate radicals, while DOM inhibited the photolysis via both attenuating light and competing radicals. Moreover, Zhujiang river water inhibited KET phototransformation. Potential KET degradation pathways were proposed based on the identification of products using LC/MS/MS and GC/MS techniques. The theoretical prediction of reaction sites was derived from Frontier Electron Densities (FEDs), which primarily involved the KET decarboxylation reaction. The ecotoxicity of the treated solutions was evaluated by employing Daphnia magna and V. fischeri as biological indicators. Ecotoxicity was also hypothetically predicted through the "ecological structure-activity relationship" (ECOSAR) program, which revealed that toxic products might be generated during the photolysis process.

Non-steroidal anti-inflammatory drugs in the watercourses of Elbe basin in Czech Republic.

Non-steroidal anti-inflammatory drugs (NSAIDs) belong to most used pharmaceuticals in the human and veterinary medicine. The widespread consumption of NSAIDs has led to their ubiquitous occurrence in water environment including large river systems. In the present study, concentrations of the five most frequently used NSAIDs (ibuprofen, diclofenac, naproxen, ketoprofen and indomethacin) were determined in the watercourses of the river Elbe basin in Czech Republic. The presence of the pharmaceuticals was measured at 29 sampling sites including urban and rural areas, small creeks and main tributaries of the Elbe monthly from April to December of 2011. For the NSAIDs quantitation, the comprehensive analytical method combing pentafluorobenzyl bromide (PFBBr) derivatization with highly sensitive two-dimensional gas chromatography time-of-flight mass spectrometry (GCxGC-TOFMS) was developed. Although the content of all NSAIDs varied at the particular sampling points significantly, total amount of particular compounds was relatively stable during all monitored periods with only non-significant increase in the spring and autumnal months. Ibuprofen was found to be the most abundant drug with maximum concentration of 3210 ng/L, followed by naproxen, diclofenac and ketoprofen (1423.8 ng/L, 1080 ng/L and 929.8 ng/L, respectively). Indomethacin was found only at several sampling sites (maximum concentration of 69.3 ng/L). Concentrations of all compounds except ibuprofen were significantly higher at sampling sites with low flow rates (creeks), followed by the biggest watercourses.

Membrane protected C18 coated stir bar sorptive extraction combined with high performance liquid chromatography-ultraviolet detection for the determination of non-steroidal anti-inflammatory drugs in water samples.

By wrapping a porous membrane around the coated stir bar, a novel membrane protected stir bar sorptive extraction (MPSBSE) was proposed to filter out the high molecular weight interferences (such as humic acid), resulting in the analysis of real environmental water samples without filtration or centrifugation. Hydrophilic and hydrophobic membranes were compared and hydrophobic polytetrafluoroethylene (PTFE) membrane impregnated with methanol was employed to protect the C18 coated stir bar. The impregnated methanol improves the transfer of target analytes from sample solution to the pores and lumen of the membrane, and then to the coated stir bar inside. By combining C18-MPSBSE with HPLC-UV, a method was proposed for the direct determination of two common non-steroidal anti-inflammatory drugs, Ketoprofen (KEP) and Naproxen (NAP) in complex water samples. Under the optimized conditions, the limit of detections of KEP and NAP are 7.89, 9.52µgL-1 in the waste water and 7.69, 6.90µgL-1 in the pure water, respectively, with the enrichment factors of 32.0-49.1-fold. Besides, the lifetime of the prepared C18 stir bar protected by PTFE membrane (50 times) is longer than that of C18 stir bar without membrane protection (20 times), indicating that the friction damage of SBSE coating during extraction was effectively avoided. The developed method was successfully applied to the analysis of KEP and NAP in domestic sewage and campus lake water samples.

Modeling the fate of a photoproduct of ketoprofen in urban rivers receiving wastewater treatment plant effluent.

Photoproducts of pharmaceuticals have been studied in order not to overlook their potential risks to aquatic organisms. However, no studies have verified an equation for predicting the fate of photoproducts in aquatic environment (Poiger equation) by field measurements, leaving uncertainties in its practical utility. Therefore, we conducted this study to test the applicability of the Poiger equation to 3-ethylbenzophenone (EBP), a photoproduct of ketoprofen (KTP). Photolysis experiments determined the fraction of KTP transformed into EBP as 0.744±0.074 and the quantum yield of EBP degradation as 0.000418±0.000090. Field studies in urban rivers and wastewater treatment plants (WWTPs) revealed that EBP was produced by sunlight, mainly in the rivers, but also appreciably in outdoor primary and secondary clarifiers in the WWTPs. We developed a model in the secondary clarifiers, disinfection tanks, and rivers by incorporating the Poiger equation, which was effective at predicting the concentrations of EBP in the river waters and wastewaters. Thus, our first trial of verification by field measurements enhanced the practical utility of the Poiger equation, though further study including several photoproducts should be conducted.

Suitability of passive sampling for the monitoring of pharmaceuticals in Finnish surface waters.

The occurrence of five pharmaceuticals, consisting of four anti-inflammatory and one antiepileptic drug, was studied by passive sampling and grab sampling in northern Lake Päijänne and River Vantaa. The passive sampling was performed by using Chemcatcher® sampler with a SDB-RPS Empore disk as a receiving phase. In Lake Päijänne, the sampling was conducted during summer 2013 at four locations near the discharge point of a wastewater treatment plant and in the years 2013 and 2015 at four locations along River Vantaa. The samples were analyzed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) in the multiple reaction monitoring mode. The concentrations of carbamazepine, diclofenac, ibuprofen, ketoprofen, and naproxen in Lake Päijänne determined by passive sampling ranged between 1.4-2.9 ng L(-1), 15-35 ng L(-1), 13-31 ng L(-1), 16-27 ng L(-1), and 3.3-32 ng L(-1), respectively. Similarly, the results in River Vantaa ranged between 1.2-40 ng L(-1), 15-65 ng L(-1), 13-33 ng L(-1), 16-31 ng L(-1), and 3.3-6.4 ng L(-1). The results suggest that the Chemcatcher passive samplers are suitable for detecting pharmaceuticals in lake and river waters.

Determination of Febuxostat in Human Plasma Using RP-LC-UV Method.

A simple and sensitive bioanalytical high-performance liquid chromatographic method with ultraviolet detection was developed and validated for the quantification of febuxostat (FEB) in human plasma. Ketoprofen was used as an internal standard. The analytes were extracted from human plasma samples by precipitation with acetonitrile. The reconstituted samples were chromatographed on C18 Bondapack 10 µm, 250 × 4.6 mm, Waters Column (Ireland) by using a mixture of acetonitrile and 0.5% aqueous phosphoric acid (pH 3) (52 : 48, v/v) as the mobile phase. The chromatographic separation was isocratically performed at room temperature at a flow rate of 1.0 mL/min with UV detection at 315 nm. The method exhibited a linear dynamic range over 0.05-5.00 µg/mL FEB in human plasma. The lower limit of quantification was 0.05 µg/mL. The results of the intra- and interday precision and accuracy studies were within the acceptable limits. The validated method was successfully applied for the determination of FEB in human plasma samples for application in bioequivalence studies.