Forensic measurement comparison of foot insole impressions.

In forensic podiatry, footprints have been shown to provide a valuable source of discriminatory information. Footprints may be found in various forms, such as bare footprints, sock-clad footprints, or as impressions on insoles within footwear. This study utilized quantitative measures of foot impressions on pairs of insoles from shoes worn by the same person from a population of 31 adults. The measurements were determined by using the Reel method and comprised measurements from the heel to the tips of the toes and width of the ball. The purpose of the study was to assess the margin of error for these measurements to determine whether they were sufficiently accurate for forensic use. A secondary purpose of this study was to determine whether the analyst's experience or lack thereof in forensic podiatry had an impact on the precision of measurement data. The insole foot impressions were assessed by two podiatrists with forensic podiatry experience in footprint analysis, footprint research, and in using the Reel method of footprint measurement, as well as by three students of podiatric medicine without any such experience. A statistical analysis of the data from the study was performed using SPSS v28 (IBM SPSS Statistics for Windows, Version 28.0. Armonk, NY: IBM Corp). The most reliable measurements were of forefoot width, heel to first toe, heel to second toe, and heel to fourth toe. The greatest variation occurred in the measurements of the heel to the third and fifth toes. The measurements of the forensic podiatrist analysts showed less variability than those of the podiatry students, suggesting that measurement precision is related to the experience of the analyst.

Martian microbes research and lessons learnt for forensic science.

A new method for looking for life outside the Earth is used as an example to demonstrate how ways of presenting complex scientific concepts to the general public, used in planetary science, could be used in forensic science. The work led to a pared down, practical definition of detectable Life for planetary exploration, An organised system capable of processing energy sources to its advantage. For nearly three quarters of Earth's history the only lifeforms were microbes, which are the target for looking for extraterrestrial life. Microbes are microscopic and may be sparsely distributed, but their metabolic products can form large, durable rocks, much easier to find and which may contain the organisms or their remains. There are similar challenges in presenting astrobiological and forensic science. Both may have to deal with very large or very small numbers which are not immediately comprehensible but can be understood by analogy. To increase the impact on the listener or reader, dramatic analogues are valuable, for example, referring to the mineralised microbial metabolic products as, "fossilised breath of bacteria" demands the audience's attention and engages them before more detailed explanations are given. The power of practical experiments or demonstrations is most important to reinforce what might otherwise be a fairly abstract concept. Surprisingly, most of these approaches can be made to work equally well in both spoken and written forms as well as in both sciences.

Species discrimination from hair using ATR-FTIR spectroscopy: Application in wildlife forensics.

Hair is a commonly encountered trace evidence in wildlife crimes involving mammals and can be used for species identification which is essential for subsequent judicial proceedings. This proof of concept study aims, to distinguish the black guard hair of three wild cat species belonging to the genus Panthera i.e. Royal Bengal Tiger (Panthera tigris tigris), Indian Leopard (Panthera pardus fusca), and Snow Leopard (Panthera uncia) using a rapid and non-destructive ATR-FTIR spectroscopic technique in combination with chemometrics. A training dataset including 72 black guard hair samples of three species (24 samples from each species) was used to construct chemometric models. A PLS2-DA model successfully classified these three species into distinct classes with R-Square values of 0.9985 (calibration) and 0.8989 (validation). VIP score was also computed, and a new PLS2DA-V model was constructed using variables with a VIP score ≥ 1. External validation was performed using a validation dataset including 18 black guard hair samples (6 samples per species) to validate the constructed PLS2-DA model. It was observed that PLS2-DA model provides greater accuracy and precision compared to the PLS2DA-V model during cross-validation and external validation. The developed PLS2-DA model was also successful in differentiating human and non-human hair with R-Square values of 0.99 and 0.91 for calibration and validation, respectively. Apart from this, a blind test was also carried out using 10 unknown hair samples which were correctly classified into their respective classes providing 100 % accuracy. This study highlights the advantages of ATR-FTIR spectroscopy associated with PLS-DA for differentiation and identification of the Royal Bengal Tiger, Indian Leopard, and Snow Leopard hairs in a rapid, accurate, eco-friendly, and non-destructive way.

The importance of assessing the ghosting phenomenon in dynamic footprints when estimating stature - Forensic implications.

In cases where multiple footprints are found at a crime scene, it is unusual that all are static, and some are likely dynamic. Depending on how the footprint was made, we distinguish between dynamic and static footprints. A distinguishing feature that has only recently been associated with dynamic footprints is the fact that dynamic footprints differ from static footprints by the presence of additional markings around the back of the heel and the tops of the toe prints, the so-called ghosting phenomenon. The present study aims to analyse the ghosting phenomenon on dynamic footprints - its occurrence in relation to sex, laterality, and different areas of footprints as well as length features. Additionally, it aims to investigate the assessment of the ghosting phenomenon on dynamic footprints when estimating stature for biological profiling in the forensic field. The study sample comprised of 170 young adults aged 18 - 30 years of both biological sexes. Stature was measured and dynamic footprints were obtained where the ghosting phenomenon was analysed together with length measurements of the same footprint with and without ghosting. In the first and second toes of footprints, the ghosting phenomenon occurred most frequently in both sexes and in the sex-mixed group. Sex differences were not significant in ghosting occurrence on right and left footprints (p > 0.05), except for the area of the left fifth toe (p = 0.045). All the footprints' lengths with ghosting were significantly higher (p < 0.001) than those without ghosting. Statures calculated from footprint length measurements with ghosting predicted stature more accurately than statures calculated from the same footprint length measurements without ghosting. In the case of finding dynamic footprints at crime scenes, it is necessary to correctly identify and evaluate ghosting of the footprint. This comparison can be helpful in interpreting how ghosting should be taken into account when estimating a person's stature.

3D scanning a crime scene to enhance juror understanding of Bloodstain Pattern Analysis evidence.

There are numerous crime scene investigation applications of 3D scanning that have been previously documented. This paper documents the application of a 3D point cloud in the presentation of Bloodstain Pattern Analysis evidence to mock jurors. 150 mock jurors viewed a presentation of Bloodstain Pattern Analysis evidence from a murder trial in the UK. After viewing the evidence, the participants were tested on their knowledge of the evidence and repeated the test again 2 weeks later; to simulate criminal trial conditions; whereby there is a time lapse between the initial viewing of evidential material and deliberation. This paper found that the mock jurors who additionally viewed a 3D flythrough of a point cloud of the crime scene, better retained knowledge of the evidence over time, reported a greater ability to visualise the crime scene and had higher levels of interest in the evidence. Crucially, the 3D flythrough group did not report different levels of confidence in the accuracy of their memories of the evidence, nor different levels of emotional arousal to the group that viewed the evidence without the 3D presentation. Together, these findings suggest that 3D scanning of crime scenes, and the resultant point cloud's presentation to jurors, could add further value to the justice system when spatial information, such as Bloodstain Pattern Analysis evidence, is presented.

Molecular Design Using Selected Concentration Effects in Optically Activated Fluorescent Matrices.

Molecular physics plays a pivotal role in various fields, including medicine, pharmaceuticals, and broader industrial applications. This study aims to enhance the methods for producing specific optically active materials with distinct spectroscopic properties at the molecular level, which are crucial for these sectors, while prioritizing human safety in both production and application. Forensic science, a significant socio-economic field, often employs hazardous substances in analyzing friction ridges on porous surfaces, posing safety concerns. In response, we formulated novel, non-toxic procedures for examining paper evidence, particularly thermal papers. Our laboratory model utilizes a polyvinyl alcohol polymer as a rigid matrix to emulate the thermal paper's environment, enabling precise control over the spectroscopic characteristics of 1,8-diazafluoro-9-one (DFO). We identified and analyzed the cyclodimer 1,8-diazafluoren-9-one (DAK DFO), which is a non-toxic and biocompatible alternative for revealing forensic marks. The reagents used to preserve fingerprints were optimized for their effectiveness and stability. Using stationary absorption and emission spectroscopy, along with time-resolved emission studies, we verified the spectroscopic attributes of the new structures under deliberate aggregation conditions. Raman spectroscopy and quantum mechanical computations substantiated the cyclodimer's configuration. The investigation provides robust scientific endorsement for the novel compound and its structural diversity, influenced by the solvatochromic sensitivity of the DFO precursor. Our approach to monitoring aggregation processes signifies a substantial shift in synthetic research paradigms, leveraging simple chemistry to yield an innovative contribution to forensic science methodologies.

Uncovering Forensic Evidence: A Path to Age Estimation through DNA Methylation.

Age estimation is a critical aspect of reconstructing a biological profile in forensic sciences. Diverse biochemical processes have been studied in their correlation with age, and the results have driven DNA methylation to the forefront as a promising biomarker. DNA methylation, an epigenetic modification, has been extensively studied in recent years for developing age estimation models in criminalistics and forensic anthropology. Epigenetic clocks, which analyze DNA sites undergoing hypermethylation or hypomethylation as individuals age, have paved the way for improved prediction models. A wide range of biomarkers and methods for DNA methylation analysis have been proposed, achieving different accuracies across samples and cell types. This review extensively explores literature from the past 5 years, showing scientific efforts toward the ultimate goal: applying age prediction models to assist in human identification.

PCR in Forensic Science: A Critical Review.

The polymerase chain reaction (PCR) has played a fundamental role in our understanding of the world, and has applications across a broad range of disciplines. The introduction of PCR into forensic science marked the beginning of a new era of DNA profiling. This era has pushed PCR to its limits and allowed genetic data to be generated from trace DNA. Trace samples contain very small amounts of degraded DNA associated with inhibitory compounds and ions. Despite significant development in the PCR process since it was first introduced, the challenges of profiling inhibited and degraded samples remain. This review examines the evolution of the PCR from its inception in the 1980s, through to its current application in forensic science. The driving factors behind PCR evolution for DNA profiling are discussed along with a critical comparison of cycling conditions used in commercial PCR kits. Newer PCR methods that are currently used in forensic practice and beyond are examined, and possible future directions of PCR for DNA profiling are evaluated.

Analysis of markers for forensic plant species identification.

While plant species identification in forensics can be useful in cases involving poisonous, psychoactive, or endangered plant species, it can also become quite challenging, especially, when dealing with processed, decaying, colonized or infected material of plant origin. The Animal Plant and Soil Traces expert working group of the European Network of Forensic Science Institutes in their best practice manual has recommended several markers for plant species identification. Current study is a part of implementation of method in a forensic laboratory and its aim is to evaluate four of the recommended markers (ITS, matK, rbcL, and trnH-psbA) for species identification of forensically important plant species including medicinal, poisonous, psychoactive, and other plants. Such parameters as PCR and sequencing success, sequence length, species resolution rate and species cover in GenBank were analysed. Blind testing was performed to evaluate use of the markers for identification of forensically more complicated samples. According to results, a combination of ITS, matK and trnH-psbA is the best choice for plant species identification. The best results with fresh plant material can be achieved with ITS, trnH-psbA, and matK, while ITS and matK are the best choice when working with low quality plant material. rbcL due to its low species discrimination rate can be used only as an indicative marker.

Accuracy and reproducibility of forensic tire examination decisions.

Tire impression evidence can be a valuable tool during a crime scene investigation-it can link vehicles to scenes or secondary locations, and reveal information about the series of events surrounding a crime. The interpretation of tire impression evidence relies on the expertise of forensic tire examiners. To date, there have not been any studies published that empirically evaluate the accuracy and reproducibility of decisions made by tire impression examiners. This paper presents the results of a study in which 17 tire impression examiners and trainees conducted 238 comparisons on 77 distinct questioned impression-known tire comparison sets (QKsets). This study was conducted digitally and addressed examinations based solely upon the characteristics of the tire impression images provided. The quality and characteristics of the impressions were selected to be broadly representative of those encountered in casework. Participants reported their decisions using a multi-level conclusion scale: 68% of responses were class associations (Association of Class Characteristics or Limited Association of Class), 21% were definitive decisions (ID or Exclusion), 8% were probable decisions (High Degree of Association or Indications of Non-Association), and 3% were neutral responses (Not Suitable or Inconclusive). Although class associations were the most reported response type, when definitive decisions were reported, they were often correct: 96% of IDs and 89% of Exclusions were consistent with ground truth regarding the source of the known tire in the QKset. Overall, we observed 4 erroneous definitive decisions (3 Exclusions on mated QKsets; 1 ID on a nonmated QKset) and 1 incorrect probable decision (Indications of Non-Association on a mated QKset). Decision rates were notably associated with both quality (lower quality questioned impressions were more likely to result in class associations) and dimensionality (2D questioned impressions were more likely to result in definitive decisions), which were correlated factors. Although the study size limits the precision of the measured rates, the results of this study remain valuable to the forensic science and legal communities and provide empirical data regarding examiner performance for a discipline that previously did not have any such estimates.

Exploring the ethical dimensions in forensic entomology: From codes of conduct to professional accountability.

This article investigates a critical part of professional careers: adhering to a code of ethics that defines proper behavior within the context of one's specialized practice. It aims to improve the setting of forensic entomology work by highlighting the ethical issues that frequently emerge. The primary goal is to uncover common ethical issues involved in this field's everyday activities and provide informed advice on appropriate resolution options. This investigation dives into the complex interaction of religious beliefs, cultural aspects, and issues of ethics, evaluating their relevance in forensic entomology. It examines a wide range of ethical issues, from the ethics involved in collecting samples at crime scenes and morguesto the ethics created into scientific investigations, report writing, and court testimony. These guiding principles are critical in setting scientific standards and building public trust in forensic entomology's ability to provide exceptional services. Notably, regardless of whether the forensic entomology service provider is accredited by any validating organization, these ethical requirements remain critical, emphasizing their global application.

Ground penetrating radar and electrical resistivity tomography surveys with a subsequent intrusive investigation in search for the missing Beaumont children in Adelaide, South Australia.

Jane, Arnna, and Grant Beaumont went missing from Glenelg Beach in Adelaide, South Australia on 26 January (Australia Day) 1966. Despite multiple land and sea searches over nearly 60 years, the children have not been found. New credible eyewitness testimony led to a site of interest at the now disused New Castalloy factory in North Plympton, Adelaide. This site has a complex stratigraphy of anthropogenic fill, which made ground penetrating radar (GPR) investigations unpromising. Electrical resistivity tomography (ERT), while not commonly used in a forensic capacity, provided an alternative approach that allowed suitable depth penetration to resolve a feature of interest, which was subsequently excavated by the South Australia Police. This feature did contain organic, and animal remains but, sadly, not the grave of Jane, Arnna, and Grant Beaumont. However, this investigation highlights the potential to use ERT in a forensic capacity, as well as the limitations of using geophysical techniques for covert burial detection.

Forensic analysis of iOS binary cookie files.

iPhone operating system (iOS) devices utilize binary cookies as a data storage tool, encoding user-specific information within an often-neglected element of smartphone analysis. This binary format contains details such as cookie flags, expiration, and creation dates, domain, and value of the cookie. These data are invaluable for forensic investigations. This study presents a comprehensive methodology to decode and extract valuable data from these files, enhancing the ability to recover user activity information from iOS devices. This paper provides an in-depth forensic investigation into the structure and function of iOS binary cookie files. Our proposed forensic technique includes a combination of reverse engineering and custom-built Python scripts to decode the binary structure. The results of our research demonstrate that these cookie files can reveal an array of important digital traces, including user preferences, visited websites, and timestamps of online activities. It concludes that the forensic analysis of iOS binary cookie files can be a tool for forensic investigators and cybersecurity professionals. In the rapidly evolving domain of digital forensics, this research contributes to our understanding of less-explored data sources within iOS devices and their potential value in investigative contexts.

Emerging use of air eDNA and its application to forensic investigations - A review.

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Improvements in DNA technologies allow collection and profiling of trace samples, comprised of few cells, significantly expanding the types of exhibits targeted for DNA analysis to include touched surfaces. However, success rates from trace and touch DNA samples tend to be poorer compared to other biological materials such as blood. Simultaneously, there have been recent advances in the utility of environmental DNA collection (eDNA) in identification and tracking of different biological organisms and species from bacteria to naked mole rats in different environments, including, soil, ice, snow, air and aquatic. This paper examines the emerging methods and research into eDNA collection, with a special emphasis on the potential forensic applications of human DNA collection from air including challenges and further studies required to progress implementation.

Prescription eyeglasses as a forensic physical evidence: Prediction of age based on refractive error measures using machine learning algorithm.

Refractive errors (RE) are commonly reported visual impairment problems worldwide. Previous clinical studies demonstrated age-related changes in human eyes. We hypothesized that the binocular RE metrics including sphere and cylinder power, axis orientation, and interpupillary distance (IPD) can be used for forensic age estimation of an unknown individual. RE data of both eyes were collected from the clinical optometric exams and prescription glasses of 2027 Egyptian individuals aged between 2 to 93 years. The differences between age groups as well as sides, and sexual dimorphism were explored. Two modeling methods were compared: multiple and stepwise linear regression (LR) versus machine learning Regression Forest (RFM). Data were apportioned into training and test datasets with a ratio of 80/20. The results showed significant differences among the age groups in each eye for all variables. Stepwise LR improved the results over models based on the one-sided lens due to selection of IPD in addition to the left and right axis, and left sphere as independent variables. For the RFM, the left axis and IPD were the most important features. RFM outperformed LR in terms of accuracy and root mean squared error (RMSE). The estimated age within ±10 years showed 81.4% accuracy rate and RMSE = 8.9 years versus 38.5% accuracy rate and RMSE = 17.99 years using RFM and stepwise LR, respectively, in the test set. The current study upholds the significance of the age-related changes of refractive error in formulating alternative forensic age estimation models when standard methods are unavailable.

Assessing iPhone LiDAR & Recon-3D for determining area of origin in bloodstain pattern analysis.

Bloodstain pattern analysis (BPA) has proven to be a useful tool in forensic and criminal investigations for quite some time. Traditionally, documenting a crime scene for a bloodletting event was completed using manual techniques, physical strings, and a tape measure. In more recent years, laser scanners and 3D software programs have become a preferred method to capture accurate data that improves the validity and reliability of BPA. The initial cost of laser scanning equipment is relatively high, rendering these systems inaccessible to some police and smaller agencies. Recon-3D is a newly developed iPhone application that utilizes the iPhone LiDAR sensor in combination with video data to create 3D point clouds of crime scenes. To assess the viability of Recon-3D for area of origin analysis, two tests were performed. One was a series of bloodstain impacts which were analyzed in FARO Zone 3D software, while the second was a series of 6 repeated Recon-3D scans of two 90-degree walls which was then compared to the FARO Focus S350 scanner using CloudCompare software. A total of eight impact patterns were made at three different distances from a wall. The area of origin was measured and compared to the known location of the blood source. The average total 3D error for the area of origin set at 25, 50, and 100 cm from two perpendicular walls was found to be 6.04, 15.16, and 36.59 cm, respectively. These results are similar to past studies where programs such as HemoSpat have been used. The results of the point cloud comparison show that on average, 95% of the points from Recon-3D fall below a threshold of 3.6 mm when compared to a FARO Focus S350 laser scanner. Thus, the results of this test suggest that Recon-3D is an accurate and affordable scanning application for bloodstain patterns at crime scenes and the data provide acceptable results for area of origin analysis in BPA programs which accept laser scanner data.

Father figure: Study of the age progression process from old pictures and its value in forensic sciences.

The application of age progression to the search for missing persons demonstrates its usefulness in being able to reconstruct the aged face based on the current age of a person who has been missing for many years. Age progression takes into account facial physiognomic elements and their changes over time. Based on these premises, the present study aims to investigate the evolution of somatic features, from childhood to adulthood, of one of the authors' father using photos at different ages of him. Sixteen photos were collected depicting an individual of Italian origin between the age of 1 and 72. The photos were processed in Adobe© Photoshop software to graphically highlight the shape development of individual physiognomic elements. The shape of the face, eyebrows, eyes, nose, mouth, and cheeks were analysed in detail using a morphological approach. The ageing processes that occurred in this case were discussed on the basis of the literature. The present study demonstrates the in-depth analysis of the dynamics of facial growth in a single case. Nonetheless, aging is different for each individual, so further studies are necessary to observe facial development on as many subjects as possible.

Monitoring of simulated clandestine graves of victims using UAVs, GPR, electrical tomography and conductivity over 4-8 years post-burial to aid forensic search investigators in Colombia, South America.

In Colombia there are estimated to be over 121,000 missing people and victims of forced disappearances. Forensic investigators therefore need assistance in determining optimal detection techniques for buried victims, to give victims' families closure and for the wider community to see that justice is being served. Previous research has created 12 controlled simulated clandestine graves of typical Colombian murder victim scenarios at 0.5 m - 1.2 m depths in savannah and rainforest sites in Colombia. The 0-3 years of geophysical monitoring results of were published, with this paper reporting on 4-8 years monitoring of both UAV drone results and geophysical data. The UAV results from the year 8 survey, published for first time from Colombia, showed that the simulated graves could still be located using NDVI and NIR multi-spectral data, but not using optical or other multi-spectral data. The 0-3 years of geophysical data found the simulated clandestine graves could be detected with electrical resistivity and GPR methods, with the 4-8 year surveys evidencing that they could still be detected using bulk ground conductivity surveys, GPR horizontal time slice datasets and 2D ERT profiles. Research implications suggest initial use of UAV remote sensing technology to pinpoint likely search areas, before subsequent ground reconnaissance, geophysical surveys and their interpretation, before intrusive investigation methods are employed for detecting missing and disappeared persons in Colombia.