Evaluating changes in growth and pigmentation of Cladosporium cladosporioides and Paecilomyces variotii in response to gamma and ultraviolet irradiation.

Melanin-containing fungi (black molds) have the capacity to thrive under extreme environmental conditions such as the elevated radiation levels inside the former Chernobyl reactors. These fungi have been hypothesized to grow toward and use gamma radiation as an energy source, but the literature does not clearly address which energies of the electromagnetic spectrum, if any, positively affect fungal growth. The goal of this work was to characterize the response of non-melanized and melanized fungi to two distinct electromagnetic wavelengths, i.e., ultraviolet (UV) and gamma ray, keeping absorption and other potentially confounding variables constant. Exposure to UV or gamma radiation induced significant changes in fungi pigmentation, but not growth rate of Cladosporium cladosporioides and Paecilomyces variotii. Specifically, increased pigmentation of both fungi was observed in samples exposed to UV, while decreased pigmentation was observed for gamma-irradiated samples. These results provide new insights into the role of electromagnetic energies on growth of fungi and provide an impetus to examine additional energies and types of radiation to develop a fundamental understanding of this phenomenon.

Morphological, molecular characterization, plant pathogenicity and biocontrol of Cladosporium complex groups associated with faba beans.

Vicia faba (faba bean) is one of the most significant leguminous crops. The faba bean is specialized by maximum nutritional value, in energy and protein content, which leads it to be suitable for food and feed production. Diseases caused with fungi are amongst the biotic factors responsible for decreasing in faba bean yields. In this work, Cladosporium isolates were recorded in cultivated faba bean leaves and pods collected from markets in Qena, Upper Egypt; morphological features and molecular characterization based on actin gene were performed. The ability of the pathogens to cause disease in faba bean seedlings and the biocontrol method to avoid the pathogenic effect of Cladosporium were determined. Results showed that Cladosporium is the main genera isolated from faba beans, and the morphological criteria showed presence of three species complex groups of Cladosporium (C. cladosporioides, C. herbarum and C. sphaerospermum) and the confirmation with molecular characterization revealed the existence of four species in the three groups. All the 26 tested strains of Cladosporium were able to cause leaf lesions on Vicia faba seedlings with different levels. Chaetomium globosum is a biocontrol agent could inhibit the growth of the majority strains of Cladosporium.

Dos interesantes contaminantes fúngicos filamentosos en muestras clínicas positivas a Trychophyton rubrum: una situación de curiosidad morfológica / Two interesting filamentous fungal contaminants in clinical samples positive to Trychophyton rubrum: a situation of morphological curiosity

Las dermatofitosis corresponden a un grupo de enfermedades micóticas comunes en piel y fanéreas, donde Trichophyton rubrum es el agente causante más frecuente a nivel mundial y presente en nuestros 2 casos de pacientes masculinos con estas micosis, una en uñas y la otra en piel. Sin embargo, el enfoque de esta publicación se basa principalmente en la presencia de 2 interesantes contaminantes (uno en cada caso clínico) presentes solo en los cultivos de las primeras siembras como saprófitos y por ende como propágulos de dispersión, asociados al ambiente y sin intervención clínica demostrada en ambas micosis. La descripción morfofisiológica de estos 2 contaminantes Metarhizium purpureo-genum(similis) y Monascus ruber fue más bien una curiosidad esencial que el micólogo clínico adquiere en su contínua formación y ante la posibilidad de infecciones mixtas, pudiendo conjugar sus hallazgos junto al análisis taxonómico y los factores geográficos y edáficos asociados a su distribución. (AU)

Dermatophytoses belongs to a group of common mycotic diseases in skin and pharynals, where Trichophyton rubrum is the most frequent causative agent worldwide and present in our 2 cases of male patients with these mycoses, one in nails and the other in skin. However, the focus of this publication is mainly about the presence of 2 interesting contaminants (one in each clinical case) present only in the crops of the first sowings as saprophytes and therefore as dispersal propagules, associated with the environment and without clinical intervention demonstrated in both mycoses. The morphophysiological description of these 2 contaminants, Metarhizium purpureogenum (similis) and Monascus ruber was rather an essential curiosity that the clinical mycologist acquires in his continuous training and in the face of the possibility of mixed infections, being able to combine his findings together with the taxonomic analysis and the geographic and edaphic factors associated with its distribution. (AU)

Antifungal activity of Saccharomyces cerevisiae and assessment of ochratoxigenic load on currants by means of Real Time PCR.

Currants are prone to contamination by ochratoxin during cultivation, processing and storage conditions. Saccharomyces cerevisiae is considered to be among the main species of grape yeast flora able to control antagonistic fungi. In this study, the potential of S. cerevisiae Y33 was investigated to inhibit the growth of several fungal species indigenous to the microbiota of grapes. Moreover, the efficacy of this yeast species was investigated to inhibit OTA by toxin producing fungi both in vitro and in situ. For this purpose thirty-five different fungal species, belonging to the genera Aspergillus, Penicillium, Cladosporium, Fusarium and Alternaria interacted in vitro with S. cerevisiae on Malt Extract agar plates, stored at 25 °C for 14 days. Results showed that the highest OTA producer A. carbonarius F71 was inhibited more than 99% from day 7, in contrast to A. niger strains that presented enhanced OTA production at day 14 due to interaction with S. cerevisiae Y33. Additionally, the antifungal potential of the selected yeast was also studied in situ on currants subjected to different treatments and stored at 25 °C for 28 days. Microbiological analysis was undertaken for the enumeration of the bacterial and fungal flora, together with OTA determination at 7 and 21 days. To quantify A. carbonarius on all treated currant samples, molecular analysis with Real Time PCR was employed. A standard curve was prepared with A. carbonarius DNA. The efficiency of the curve was estimated to 10.416, the slope to -3.312 and the range of haploid genome that could be estimated was from 1.05 to 105∙105. The amount of A. carbonarius DNA in all treated currants samples, where the fungus was positively detected, ranged from as low as 0.08 to 562 ng DNA/g currants. The antifungal activity of S. cerevisiae Y33 was observed in all studied cases, causing inhibition of fungal growth and OTA production.

Influence of pore structure on humidity parameters of cement-polymer mortars contaminated with filamentous fungi.

Mineral building materials are porous materials. The volume of pores connected is the active volume of pores or the effective volume. The volume of all pores is the total volume of the pores. The properties of the individual pores are different. Their dimensions and shape can influence the properties of materials. Materials are modified with different admixtures to improve their properties. However, additives or admixtures can cause corrosion. Although building materials do not provide food for microorganisms, they are very often inhabited by them. As a result of their presence and the action of metabolic products, biodeterioration occurs. One of the products of metabolism is water. In this paper we investigated how the modified structure of biodeterioration caused by mould fungi affects the moisture content of cement-polymer mortar with the admixture of polysiloxane latex.

Seasonal changes in indoor airborne fungal concentration in a hematology ward.

Invasive fungal disease (IFD) is an important infectious complication of hematological disorders, especially in hematopoietic stem cell transplantation recipients. Evidences suggest seasonal and/or geographical variations in the airborne fungal counts and a relationship between those counts and the incidence of IFD. We evaluated the concentrations of indoor airborne fungi quantitated over the course of one year in a hematology ward in Japan. In January, April, July, and October, fixed volumes of air samples were obtained by an air sampler in a hematology ward not equipped with a high-efficiency particulate air filter and incubated in fugal cultures. Samples were also obtained from a protective environment in the same ward and were evaluated. The number of fungal colonies per 50 L of sampled air was highest in October (median 2.25 (range, 0.2-7.0)), which was significantly higher than those in the other three months (0.1 (range, 0-1.0) in January; 0 (0-0) in April; 0.55 (0-2.5) in July; P < 0.01)). Commonly identified pathogens included Penicillium and Cladosrporium species, but Aspergillus species was detected only in July and October samples. These results suggest a seasonal variation in indoor airborne fungal concentrations in Japan, which could affect the epidemiology of IFD.

The role of oxidative stress in the growth of the indoor mold Cladosporium cladosporioides under water dynamics.

Moisture is one of the critical abiotic factors that can affect mold growth. Indoor humidity is typically fluctuating, which renders a transient water supply for mold growth. Understanding mold growth under water dynamics and its underlying mechanisms can help in the development of novel and sustainable mold prevention strategies. In this study, pre-germination and germinated spores of Cladosporium cladosporioides were exposed to daily wet-dry cycles with different combinations of wetting and drying duration. Afterward, growth delay, cellular H2 O2 concentration, and catalase (CAT) activity were measured and compared. We found that under daily wet-dry cycles, the longer the growth delay was observed, the higher the cellular H2 O2 concentration was detected, with the 12-12 wet-dry cycle (12-hour wet and 12-hour dry) showing the longest growth delay and highest cellular H2 O2 production. A positive correlation between cellular H2 O2 concentration and growth delay was suggested by Pearson correlation coefficient and linear regression analysis (P < .0001, R2  = 0.85). Furthermore, under daily wet-dry cycles, molds derived from pre-germination spores generally exhibited shorter growth delay, lower cellular H2 O2 concentration, and higher CAT activity than molds developed from germinated spores. These results together suggest that the growth delay of C. cladosporioides under water dynamics is associated with oxidative stress.

The Bacteriological Properties of Bacillus Strain TM-I-3 and Analysis of the Volatile Antifungal Compounds Emitted by this Bacteria.

Previously, we isolated and examined a bacterial strain designated as TM-I-3, belonging to the genus Bacillus, from soil in Nagasaki, Japan. This bacterium was able to inhibit the growth of molds, without coming into direct contact with them. Non-contact antifungals are capable of providing multidirectional inhibition and may contribute to disease prevention. In this study, we revealed the bacteriological properties of TM-I-3 and evaluated the antifungal activity of the compounds emitted from this bacterium. In addition, we analyzed the antimicrobial substances released from TM-I-3 using GC/MS to elucidate the mechanism of its action. Antimicrobial compounds from strain TM-I-3 were identified as acetic acid, propanoic acid, isovaleric acid, 2-methylbutanoic acid, and benzaldehyde, which are all reported to have antimicrobial activity. TM-I-3 demonstrated possible efficacy in inhibiting the growth of Aspergillus fumigatus, Cladosporium cladosporioides and Penicillium expansum, which may lead to inhibition of common fungal contaminants of household products and prevention of some pulmonary diseases.

Using the gamma concept in modelling fungal growth: A case study on brioche-type products.

Fungi are common spoilers of intermediate moisture foods such as bakery products. Brioche are bakery products prone to fungal spoilage due to their pH (5.8-6.2) and water activity (aw) (0.82-0.84). The aims of the present study were: (i) the identification of fungal species occurring in brioche products, (ii) the in vitro assessment of their growth potential, and (iii) the development of a validated growth model following the gamma concept. A total of 102 fungal strains were isolated, with Penicillium sp., Cladosporium sp., and Aspergillus sp. being the main genera, representing 90% of the isolates. Given the isolation frequency, any potential fungal prevalence throughout the bakery processs and/or the results of in vitro assessment of fungal growth potential under conditions mimicking brioche (pH, aw, temperature), Aspergillus flavus, Aspergillus fumigatus, and Penicillium sp. were selected for the development of the gamma model. According to in vitro validation, the model successfully predicted fungal growth, while on in situ experiments, the intrinsic parameters (aw and/or level of used preservative) of brioche in combination with packaging conditions (modified atmosphere) did not allow fungal growth.

Post-mortem fungal colonization pattern during 6 weeks: Two case studies.

The present study reports the mycological data collected from two corpses preserved in controlled conditions and monitored for 6 weeks at the mortuary. On the whole during the monitoring more than 70 fungal CFU (Colony Forming Units) were sampled from the corpses. The data collected were used to map the body fungal colonization of the corpses during 6 weeks. The two body maps show a huge difference between these cases, mainly due to the perimortem conditions. In particular, in the case one the facial area colonised by fungi rose from 15% to 63% in six weeks, while the fungal colonization of case two was about 1% for the whole monitoring period. This work shows, for the first time, the data about the pattern of colonization and distribution of fungi on real corpses after death and argues about the influence of perimortem settings on fungal colonization. Moreover, the paper suggests exploiting the study of fungal colony development and maturation to assess post-mortem interval (PMI).

Filamentous fungi associated with natural infection of noble rot on withered grapes.

The effects of noble rot infection of grapes on the characteristics of different types of wine, including Italian passito wine, are well known. Nevertheless, there is still little information on filamentous fungi associated with noble-rotten grapes. In this study, withered Garganega grapes for passito wine production, naturally infected by noble rot, were analyzed and compared to sound grapes. Skin morphology and fungal population on berry surfaces were analyzed. Scanning electron microscopy analysis revealed microcracks, germination conidia and branched hyphae on noble-rotten berries. Penicillium, Aureobasidium and Cladosporium were the most frequent genera present. Analysis of single berries displayed higher heterogeneity of epiphytic fungi in those infected by noble-rot than in sound berries. Penicillium adametzoides, Cladosporium cladospoirioides and Coniochaeta polymorpha were recovered. These, to the best of our knowledge, had never been previously isolated from withered grapes and, for C. polymorpha, from grapevine. This study provided novel data on noble rot mycobiota and suggests that fungi that co-habit with B. cinerea could have an important role on grape and wine quality.

Reduction of chromium (VI) from aqueous solution by biomass of Cladosporium cladosporioides.

The capacity of Cladosporium cladosporioides biomass for removal of Cr(VI) in aqueous solutions was evaluated. A 2 × 2 factorial experiment design was used to study the effects of pH and biomass doses. Lower pH values and larger biomass doses increased the capacity of C. cladosporioides biomass for removal of Cr(VI), reaching a reduction capacity of 492.85 mg g-1, a significantly higher value compared to other biomass reported. Cr(VI) removal kinetic rates followed a pseudo-second order model, like other fungal biomass reported previously. The apparent adsorption process was described well by the Freundlich isothermal model. However, determination of total chromium indicated that adsorption of Cr(VI) was followed by a redox reaction that released proportional quantities of Cr(III) into the experimental supernatant, suggesting a parallel adsorption-reduction process. Comparison of Fourier transform infrared spectroscopy spectra of C. cladosporioides biomass before and after the reduction process demonstrated the involvement of positively charged amino groups in the Cr(VI) adsorption-reduction process.

Synthesis of secondary metabolites by Cladosporium resinae (NRL-6437) under different growth media and chemical inducers and their pharmaceutical activity.

The role of different growth media and chemical enhancer on synthesis of secondary metabolites Cladosporium resinae (NRL-6437) was investigated for their in vitro biological activities. Cladosporium resinae (NRL-6437) were grown in various nutrient media (Czapeak-dox Broth (CB), Czapeak Yeast-extract Broth (CYB), Yeast Extract Sucrose (YES), Potato Dextrose Broth (PDB) and Czapeak-dox (supplemented with glucose and starch) Broth (CGSB) for the production of metabolites. Two chemical epigenetic modifiers (suberoyl-anilide hydroxamic acid (SAHA) and 5-azacytidine (5-AZA) were also used for the expression of silent genes for secondary metabolite production. Our results indicated that among different media, Czapeak yeast extract broth produced more secondary metabolites. Application of 15mM of both modifiers was effective for the expressions of silent genes resulting in an increased metabolites production. Secondary metabolites extracted in ethyl acetate and fractionized in n-Hexane were also tested for their biological activity. The secondary metabolites revealed varying degrees of growth inhibitions of the tested organisms. Similarly, these metabolites were also active against brine shrimps and Lemna.

Carnivore Attractant or Plant Elicitor? Multifunctional Roles of Methyl Salicylate Lures in Tomato Defense.

Synthetic plant volatile lures attract natural enemies, but may have non-target effects due to the multifunctional nature of volatile signals. For example, methyl salicylate (MeSA) is used to attract predators, yet also serves as a signaling hormone involved in plant pathogen defense. We investigated the consequences of deploying MeSA lures to attract predators for tomato (Solanum lycopersicum) defense against herbivores. To understand the spatial distribution of the lure's effect, we exposed tomatoes in the field to MeSA along a linear distance gradient and induced defenses by simulating feeding by hornworm caterpillars in a fully crossed factorial design (+/- MeSA, +/- herbivory). Subsequently, we analyzed activity of several defensive proteins (protease inhibitors, polyphenol oxidase, peroxidase), development of hornworm larvae (Manduca sexta), growth of fungal pathogens (Cladosporium and Alternaria), and attractiveness to herbivores and predators. Overall, MeSA-exposed plants were more resistant to both insects and pathogens. Secondary pathogen infection was reduced by 25% in MeSA exposed plants, possibly due to elevated polyphenol oxidase activity. Interestingly, we found that lures affected plant pathogen defenses equivalently across all distances (up to 4 m away) indicating that horizontal diffusion of a synthetic volatile may be greater than previously assumed. While thrips avoided colonizing hornworm- damaged tomato plants, this induced resistance was not observed upon pre-exposure to MeSA, suggesting that MeSA suppresses the repellant effect induced by herbivory. Thus, using MeSA lures in biological control may inadvertently protect crops from pathogens, but has mixed effects on plant resistance to insect herbivores.

Six new soil-inhabiting Cladosporium species from plateaus in China.

Cladosporium species are ubiquitous in various environments but are hitherto rarely isolated from soil. In the present study, six new Cladosporium species inhabiting the plateau soils of China are described as C. neopsychrotolerans, C. paralimoniforme, C. prolongatum, C. sinuatum, C. tianshanense, and C. verruculosum. These species are phylogenetically distinct and morphologically different from known species. This study increased the number of species classified in the C. cladosporioides and C. herbarum complexes and revealed Chinese plateau soil as a rich niche of Cladosporium species diversity.

Identification and control of moulds responsible for black spot spoilage in dry-cured ham.

The aims of this work were to identify moulds responsible for black spot spoilage in the drying and cellar stages of dry-cured ham processing and evaluate the effectiveness of preventive actions for controlling this alteration. Four mould strains isolated from spoiled hams were identified by morphological characteristics and the ITS and ß-tubulin sequencing. Two of them were Cladosporium oxysporum, one was C. cladosporioides and the remaining one was C. herbarum. These spoiling strains reproduced the black spots on dry-cured ham-based media and ham slices. Additionally, the effect of water activity (aw) conditions reached throughout dry-cured ham ripening and the activity of the protective culture Penicillium chrysogenum CECT 20922 against the spoiling moulds were evaluated. In the dry-cured ham model system the growth of the Cladosporium strains was minimised when the aw approaches 0.84 or in P. chrysogenum CECT 20922 inoculated dry-cured ham slices. Therefore such combination could be used to avoid the black spot formation in dry-cured ham.

Phenylpropanoid-rich Essential Oils of Piper Species from the Amazon and their Antifungal and Anti-cholinesterase Activities.

The essential oils (EOs) from aerial parts of Piper aduncum, P. callosuin and P. marginatum, collected from the Amazon region of Brazil, were analyzed by GC-MS and then evaluated for their antifungal and anticholinesterase activities. The essential oils were dominated by phenylpropanoids, such as dillapiole (73.0%) in P. aduncum, safrole (66.0%) in P. callosum and 3,4-methylenedioxypropiophenone (21.8%) in P. inarginatum. The analyzed oils showed low to moderate antifungal activity; with detection limits (DL) from 10 to 100 pg against Cladosporium cladosporioides and C. sphareospermum. In the anticholinesterase (AChE) evaluation, the oils of P. callosum (DL = 0.01 ng) and P. marginatum (DL = 0.01 ng) were one hundred times more potent than the standard physostigmine (DL = 1.0 ng). Molecular docking analysis showed that phenylpropanoids docked reasonably well with acetyleholinesterase and may be responsible for the anti-AChE activities of the Piper EOs. This is the first presentation about acetylcholinesterase inhibition by methylenedioxyphenyl-propanoids.

Fungal compositions and diversities on indoor surfaces with visible mold growths in residential buildings in the Seoul Capital Area of South Korea.

Indoor visible mold growths are known to be associated with allergies and respiratory illnesses. However, a question remains of their compositions and diversities. Using swab sampling and high-throughput DNA sequencing, this study analyzed taxonomic compositions and diversities of fungi on indoor surfaces laden with visible mold growths in residential apartments in South Korea. The sequencing results showed low species diversities with Shannon indices ranging from 0.14 to 2.29 (mean = 1.11). Several allergy-related genera were detected on the same surface, where the most abundant Cladosporium with a mean relative abundance of 41% co-occurred with less abundant Aspergillus (0.094%), Rhodotorula (6.3%), Cryptococcus (3.7%), Alternaria (4.1%), and Crivellia (17%). ß diversity analyses showed significant differences in the fungal communities between enclosed balconies and other indoor areas (P < 0.05, ANOSIM), emphasizing a need to sample at multiple indoor locations when assessments are made for indoor visible mold growths. High-throughput sequencing is powerful in characterizing compositions and diversities of fungal communities. Future studies should examine the relationships between taxonomic compositions and diversities of indoor visible molds and health outcomes of allergies and respiratory illnesses in residential buildings.

[THE INFLUENCE OF B-IRRADIATION ON MICROMYCETES ISOLATED FROM THE ZONE OF RADIONUCLIDE CONTAMINATION].

The resistance of the micromycetes to ß-irradiation had been studied. The study was conducted on two species: Cladosporium sphaerospermum Penz. and Alternaria alternata (Fr.) Keissl., each of them was represented by six strains. Half of strains were isolated from the inner locations of the "Shelter" object (SO), which were characterized by different levels of radionuclide contamination. For C. sphaerospermum strains maximum resistance to ß-radiation was observed among 20-day-old cultures. The greatest resistance to ß-radiation had been demonstrated by two strains: 5-1 (isolated from SO location with the highest level of contamination) and 852 (control). For A. alternata strains maximum resistance to ß-radiation was observed among 40-day-old cultures. As the most resistant were characterized 56 and 105 isolates from the SO inner location with a high level of the radionuclide contamination. Based on the obtained results we concluded about high resistance to irradiation of both studied species of anamorphic fungi, which achieved through different life strategies: C. sphaerospermum strains survive due to rapid and abundant formation of conidia, whereas conidia of A. alternata strains are formed slowly, but they have greater advantage under irradiation due to their multicellular structure and large sizes.

Xerotolerant Cladosporium sphaerospermum Are Predominant on Indoor Surfaces Compared to Other Cladosporium Species.

Indoor fungi are a major cause of cosmetic and structural damage of buildings worldwide and prolonged exposure of these fungi poses a health risk. Aspergillus, Penicillium and Cladosporium species are the most predominant fungi in indoor environments. Cladosporium species predominate under ambient conditions. A total of 123 Cladosporium isolates originating from indoor air and indoor surfaces of archives, industrial factories, laboratories, and other buildings from four continents were identified by sequencing the internal transcribed spacer (ITS), and a part of the translation elongation factor 1α gene (TEF) and actin gene (ACT). Species from the Cladosporium sphaerospermum species complex were most predominant representing 44.7% of all isolates, while the Cladosporium cladosporioides and Cladosporium herbarum species complexes represented 33.3% and 22.0%, respectively. The contribution of the C. sphaerospermum species complex was 23.1% and 58.2% in the indoor air and isolates from indoor surfaces, respectively. Isolates from this species complex showed growth at lower water activity (≥ 0.82) when compared to species from the C. cladosporioides and C. herbarum species complexes (≥ 0.85). Together, these data indicate that xerotolerance provide the C. sphaerospermum species complex advantage in colonizing indoor surfaces. As a consequence, C. sphaerospermum are proposed to be the most predominant fungus at these locations under ambient conditions. Findings are discussed in relation to the specificity of allergy test, as the current species of Cladosporium used to develop these tests are not the predominant indoor species.