Fractionation of Nanoparticle Matter in Red Wines Using Asymmetrical Flow Field-Flow Fractionation.

The particle matter of wine is mainly composed of wine colloids and macromolecules. The present work develops a methodology using asymmetrical flow field-flow fractionation coupled with multi-angle light scattering, differential refractive index detector, and ultraviolet detector (AsFlFFF-MALS-dRI-UV) for the fractionation and determination of the molar mass, the hydrodynamic radius, and the apparent densities of the aggregates and macromolecules present in wine samples. The results from a set of six Argentinian high-altitude wines showed two main populations: the first population composed of wine colloids with higher UV-specific absorptivity and the second population composed of polysaccharides, such as arabinogalactans. The conformation results showed that population 1 consists of small and dense particles, while population 2 showed high molar masses and lower densities. The results demonstrated the use of AsFlFFF as a new, effective method for the fractionation and characterization of wine colloids and wine macromolecules in red wines with further potential applications.

Innovative processing strategies and technologies to obtain hydrocolloids from macroalgae for food applications.

The macroalgal hydrocolloid industry is a rapidly growing industry with an annual growth in the global production of 2-3 %. Hydrocolloids from macroalgae are mainly in the form of polysaccharides with other nutrients, such as vitamins, minerals, and proteins. Due to its potential industrial applications, macroalgae have been used as raw materials for hydrocolloids extraction. Compared to the conventional extraction methods, emerging innovative assisted extraction technologies (e.g., Ultrasound/Microwave assisted extraction) have been developed to maximise the extraction yields, efficiency and thereby, maintaining sustainability along the process. These novel techniques are considered as clean and green strategies, with a potential for a large-scale production; thus, avoiding or reducing the use of chemicals. However, more research is required to establish their mechanism of action in order to finally implement them at industrial level. This paper reviews the most relevant strategies and technologies involved in the production of hydrocolloids from macroalgae.

Current applications of Colloidal Liquid Aphrons: Predispersed solvent extraction, enzyme immobilization and drug delivery.

Colloidal Liquid Aphrons (CLAs) are micron sized discrete spherical solvent droplets formed by the dispersion of polyaphrons into a bulk aqueous phase at a low phase volume ratio where they can be kept homogenously suspended with only minimal agitation. CLAs have high stability due to the presence of a surfactant 'shell' surrounding the solvent core, and possess large surface areas per unit volume for mass transfer due to their small size. Therefore, CLAs are well suited for applications in pre-dispersed solvent extraction (PSE), enzyme immobilization, and have the potential to be used as a drug delivery system. Using PSE, CLAs have been used to remove metals such as Ni2+, Cu2+, Fe3+, Cr3+ and Mg2+ from dilute streams, separate organic dyes such as Yellow 1 from wastewater, extract succinic and lactic acid, reactively extract phenylalanine, and separate suspensions. CLAs have also been used to immobilize enzymes such as lipase, lysozyme and albumins with cases of superactivity being reported due to the influence of surfactant and solvent interactions with the enzyme. Furthermore, due to their similarity to current drug delivery systems such as microemulsions and hydrogels, and other advantages, CLA systems have the potential to be adapted for drug delivery systems also. This article provides a complete list of the current applications of Colloidal Liquid Aphrons (CLAs) in PSE and enzyme immobilization, and also presents insight into how CLAs can be utilized as a drug delivery method in the future. Finally, this review ends by summarizing potentially interesting research areas to pursue in this field.

Simultaneous two drugs release form Janus particles prepared via polymerization-induced phase separation approach.

Seeded emulsion polymerization of 2-dimethylaminoethylamino methacrylate (DMAEMA) was carried out using monodispersed poly(2-hydroxyehtyl methacrylate) (PHEMA) seeds to produce Janus particles. Three feeding approaches were used comprising one together, rest and continuous feeding methods to investigate different morphologies. However, FE-SEM results showed that all feeding approaches yielded dumbbell-like Janus particles. Furthermore, snowman-like Janus particles were obtained via seeded distillation precipitation polymerization (DPP). It is shown that minimizing the total interfacial free energy alongside difference in solubility parameters of Janus domains are responsible for obtained morphologies. Two different morphologies (dumbbell-like and snowman-like) were chosen as carriers of ibuprofen and DOX simultaneously. Also, simultaneous release of two drugs were investigated in different conditions. Dumbbell-like Janus particles showed higher ibuprofen loading whereas DOX was more loaded onto snowman-like Janus particles. Also, DOX was released more rapidly through Janus particles at different pH values and both types of Janus particles showed similar drugs release behaviors.

Rheological properties of tamarind (Tamarindus indica L.) seed mucilage obtained by spray-drying as a novel source of hydrocolloid.

Tamarind seed mucilage (TSM) was extracted and obtained by spray drying. The power law model well described the rheological behavior of the TSM dispersions with determination coefficients R2 higher than 0.93. According to power law model, non-Newtonian shear thinning behavior was observed at all concentrations (0.5%, 1%, 1.5% and 2%) and temperatures (25, 30, 40, and 60°C) studied. Increasing temperature decreased the viscosity and increased the flow behavior index, opposite effect was observed when increasing the concentration. The temperature effect was more pronounced at 2.0% TSM concentration with an activation energy of 20.25kJ/mol. A clear dependence of viscosity on pH was observed, as pH increased from acidic to alkaline conditions, the viscosity increased. It was found that the rheological properties of TSM were affected by the sucrose and salts and their concentrations as well due to the addition of ions (or sucrose) decreases repulsion and allows molecule expansion promoting a significant reduction in viscosity. These results suggest that TMS could be applied in the production of foods that require additives with thickening capacity.

Isolation, Structural characterization, and antiproliferative activity of phycocolloids from the red seaweed Laurencia papillosa on MCF-7 human breast cancer cells.

Hydrocolloids from seaweeds (phycocolloids) have interesting functional properties like antiproliferative activity. Marine algae consumptions are linked to law cancer incidences in countries that traditionally consume marine products. In this study, we have investigated water-soluble sulfated polysaccharides isolated from the red seaweed Laurencia papillosa and determined their chemical characteristics and biological activities on the human breast cancer cell line MCF-7. Total polysaccharides were extracted and fractionated from L. papillosa and characterized using FTIR-ATR and NMR spectrometry. In addition, their approximate molar mass was determined by GPC method. The chemical characterization of purified polysaccharides reveals the presence of sulfated polysaccharides differentially dispersed in the algal cell wall. They are the three types of carrageenan, kappa, iota and lambda carrageenans, named LP-W1, -W2 and -W3 respectively. Biological effects and cytotoxicity of the identified of the three sulfated polysaccharide fractions were evaluated in MCF-7 cell line. Our results showed a significant inhibition of MCF-7 cell viability by dose-dependent manner for cells exposed to LP-W2 and LP-W3 polysaccharides for 24h. The mechanistic of LP fractions-mediated apoptosis in MCF-7 cells was demonstrated. The biological effects of L. papillosa SPs indicate that it may be a promising candidate for breast cancer prevention and therapy.

Application of seaweeds to develop new food products with enhanced shelf-life, quality and health-related beneficial properties.

Edible seaweeds are a good source of antioxidants, dietary fibers, essential amino acids, vitamins, phytochemicals, polyunsaturated fatty acids, and minerals. Many studies have evaluated the gelling, thickening and therapeutic properties of seaweeds when they are used individually. This review gives an overview on the nutritional, textural, sensorial, and health-related properties of food products enriched with seaweeds and seaweed extracts. The effect of seaweed incorporation on properties of meat, fish, bakery, and other food products were highlighted in depth. Moreover, the positive effects of foods enriched with seaweeds and seaweed extracts on different lifestyle diseases such as obesity, dyslipidemia, hypertension, and diabetes were also discussed. The results of the studies demonstrated that the addition of seaweeds, in powder or extract form, can improve the nutritional and textural properties of food products. Additionally, low-fat products with less calories and less saturated fatty acids can be prepared using seaweeds. Moreover, the addition of seaweeds also affected the health properties of food products. The results of these studies demonstrated that the health value, shelf-life and overall quality of foods can be improved through the addition of either seaweeds or seaweed extracts.

Asymmetrical flow field-flow fractionation of white wine chromophoric colloidal matter.

Two analytical separation methods-size-exclusion chromatography and asymmetrical flow field-flow fractionation-were implemented to evaluate the integrity of the colloidal composition of Chardonnay white wine and the impact of pressing and fermentations on the final macromolecular composition. Wine chromophoric colloidal matter, representing UV-visible-absorbing wine macromolecules, was evaluated by optical and structural measurements combined with the description of elution profiles obtained by both separative techniques. The objective of this study was to apply these two types of fractionation on a typical Chardonnay white wine produced in Burgundy and to evaluate how each of them impacted the determination of the macromolecular chromophoric content of wine. UV-visible and fluorescence measurements of collected fractions were successfully applied. An additional proteomic study revealed that grape and microorganism proteins largely impacted the composition of chromophoric colloidal matter of Chardonnay wines. Asymmetrical flow field-flow fractionation appeared to be more reliable and less invasive with respect to the native chemical environment of chromophoric wine macromolecules, and hence is recommended as a tool to fractionate chromophoric colloidal matter in white wines. Graphical Abstract An innovative macromolecular separation method based on Asymmetrical Flow Field-Flow Fractionation was developed to better control colloidal dynamics across Chardonnay white winemaking.

Mass-manufacturable polymer microfluidic device for dual fiber optical trapping.

We present a microfluidic chip in Polymethyl methacrylate (PMMA) for optical trapping of particles in an 80µm wide microchannel using two counterpropagating single-mode beams. The trapping fibers are separated from the sample fluid by 70µm thick polymer walls. We calculate the optical forces that act on particles flowing in the microchannel using wave optics in combination with non-sequential ray-tracing and further mathematical processing. Our results are compared with a theoretical model and the Mie theory. We use a novel fabrication process that consists of a premilling step and ultraprecision diamond tooling for the manufacturing of the molds and double-sided hot embossing for replication, resulting in a robust microfluidic chip for optical trapping. In a proof-of-concept demonstration, we show the trapping capabilities of the hot embossed chip by trapping spherical beads with a diameter of 6µm, 8µm and 10µm and use the power spectrum analysis of the trapped particle displacements to characterize the trap strength.

Isolation and Characterization of Monodisperse Core-Shell Nanoparticle Fractions.

Monodispersity is a key property to control the self-assembly of colloidal particles, and is typically reached after fine-tuning of the synthesis conditions. Monodisperse particle fractions can also be separated from polydisperse suspensions via ultracentrifugation. This paper demonstrates the capability of isolating and characterizing suspensions of core-shell iron oxide-polymer nanoparticles with extremely low polydispersity (p < 0.01) and, thus, of complementing nanoparticle synthetic approaches in the pursuit of highly monodisperse materials.

Tangential Flow Ultrafiltration Allows Purification and Concentration of Lauric Acid-/Albumin-Coated Particles for Improved Magnetic Treatment.

Superparamagnetic iron oxide nanoparticles (SPIONs) are frequently used for drug targeting, hyperthermia and other biomedical purposes. Recently, we have reported the synthesis of lauric acid-/albumin-coated iron oxide nanoparticles SEON(LA-BSA), which were synthesized using excess albumin. For optimization of magnetic treatment applications, SPION suspensions need to be purified of excess surfactant and concentrated. Conventional methods for the purification and concentration of such ferrofluids often involve high shear stress and low purification rates for macromolecules, like albumin. In this work, removal of albumin by low shear stress tangential ultrafiltration and its influence on SEON(LA-BSA) particles was studied. Hydrodynamic size, surface properties and, consequently, colloidal stability of the nanoparticles remained unchanged by filtration or concentration up to four-fold (v/v). Thereby, the saturation magnetization of the suspension can be increased from 446.5 A/m up to 1667.9 A/m. In vitro analysis revealed that cellular uptake of SEON(LA-BSA) changed only marginally. The specific absorption rate (SAR) was not greatly affected by concentration. In contrast, the maximum temperature Tmax in magnetic hyperthermia is greatly enhanced from 44.4 °C up to 64.9 °C by the concentration of the particles up to 16.9 mg/mL total iron. Taken together, tangential ultrafiltration is feasible for purifying and concentrating complex hybrid coated SPION suspensions without negatively influencing specific particle characteristics. This enhances their potential for magnetic treatment.

Colloidal Defect-Free Silicalite-1 Single Crystals: Preparation, Structure Characterization, Adsorption, and Separation Properties for Alcohol/Water Mixtures.

In this work, colloidal silicalite-1 single crystals are for the first time synthesized using fluoride as mineralizing agent at near neutral pH. SEM, TEM, DLS, XRD, solid-state (29)Si MAS NMR, and adsorption/desorption experiments using nitrogen, water, n-butanol, and ethanol as adsorbates were used to characterize the crystals. The single crystals have a platelike habit with a length of less than 170 nm and an aspect ratio (length/width) of about 1.2, and the thickness of the crystals is less than 40 nm. Compared with silicalite-1 crystals grown using hydroxide as mineralizing agent, the amount of structural defects in the lattice is significantly reduced and the hydrophobicity is increased. Membrane separation and adsorption results show that the synthesized defect-free crystals present high selectivity to alcohols from alcohol/water mixtures. The n-butanol/water adsorption selectivities were ca. 165 and 14 for the defect-free crystals and a reference sample containing defects, respectively, illustrating the improvement in n-butanol/water selectivity by eliminating the polar silanol defects.

Seaweed hydrocolloid production: an update on enzyme assisted extraction and modification technologies.

Agar, alginate, and carrageenans are high-value seaweed hydrocolloids, which are used as gelation and thickening agents in different food, pharmaceutical, and biotechnological applications. The annual global production of these hydrocolloids has recently reached 100,000 tons with a gross market value just above US$ 1.1 billion. The techno-functional properties of the seaweed polysaccharides depend strictly on their unique structural make-up, notably degree and position of sulfation and presence of anhydro-bridges. Classical extraction techniques include hot alkali treatments, but recent research has shown promising results with enzymes. Current methods mainly involve use of commercially available enzyme mixtures developed for terrestrial plant material processing. Application of seaweed polysaccharide targeted enzymes allows for selective extraction at mild conditions as well as tailor-made modifications of the hydrocolloids to obtain specific functionalities. This review provides an update of the detailed structural features of κ-, ι-, λ-carrageenans, agars, and alginate, and a thorough discussion of enzyme assisted extraction and processing techniques for these hydrocolloids.

Controllable Assembly and Separation of Colloidal Nanoparticles through a One-Tube Synthesis Based on Density Gradient Centrifugation.

Self-assembly of gold nanoparticles into one-dimensional (1D) nanostructures with finite primary units was achieved by introducing a thin salt (NaCl) solution layer into density gradient before centrifugation. The electrostatic interactions between Au nanoparticles would be affected and cause 1D assembly upon passing through the salt layer. A negatively charged polymer such as poly(acrylic acid) was used as an encapsulation/stabilization layer to help the formation of 1D Au assemblies, which were subsequently sorted according to unit numbers at succeeding separation zones. A centrifugal field was introduced as the external field to overcome the random Brownian motion of NPs and benefit the assembly effect. Such a facile "one-tube synthesis" approach couples assembly and separation in one centrifuge tube by centrifuging once. The method can be tuned by changing the concentration of interference salt layer, encapsulation layer, and centrifugation rate. Furthermore, positively charged fluorescent polymers such as perylenediimide-poly(N,N-diethylaminoethyl methacrylate) could encapsulate the assemblies to give tunable fluorescence properties.

Enhanced sub-micron colloidal particle separation with interdigitated microelectrode arrays using mixed AC/DC dielectrophoretic scheme.

Dielectrophoretic separation of particles finds a variety of applications in the capture of species such as cells, viruses, proteins, DNA from biological systems, as well as other organic and inorganic contaminants from water. The ability to capture particles is constrained by poor volumetric scaling of separation force with respect to particle diameter, as well as the weak penetration of electric fields in the media. In order to improve the separation of sub-micron colloids, we present a scheme based on multiple interdigitated electrode arrays under mixed AC/DC bias. The use of high frequency longitudinal AC bias breaks the shielding effects through electroosmotic micromixing to enhance electric fields through the electrolyte, while a transverse DC bias between the electrode arrays enables penetration of the separation force to capture particles from the bulk of the microchannel. We determine the favorable biasing conditions for field enhancement with the help of analytical models, and experimentally demonstrate the improved capture from sub-micron colloidal suspensions with the mixed AC/DC electrostatic excitation scheme over conventional AC-DEP methods.

Repercusión del cebado con coloides y la ultrafiltración sobre el sangrado posoperatorio y la transfusión sanguínea en cirugía cardiaca. Ensayo clínico aleatorizado / Effect of priming solution and ultrafiltration on post-operative bleeding and blood transfusion in cardiac surgery. Randomized controlled trial

Objetivo. Valorar la eficacia del cebado del sistema de circulación extracorpórea con albúmina-manitol asociado a ultrafiltración para reducir el sangrado posoperatorio y las necesidades transfusionales en cirugía cardiaca, así como su repercusión sobre los balances hídricos, los parámetros de coagulación y hematimetría, la reintervención por sangrado y la estancia en UCI y hospitalaria. Material y métodos. Ciento treinta y cuatro pacientes programados en cirugía cardiaca fueron aleatorizados para recibir en el cebado Ringer lactato 1.500 mL (grupo C), o 250 mL de manitol 20%, 150 mL de albúmina 20% y 1.100 mL de Ringer lactato asociado a ultrafiltración (grupo T). Se determinaron el volumen de sangrado, las transfusiones, los balances hídricos, los parámetros de coagulación y la hematimetría hasta las 48 h del posoperatorio. Resultados. Encontramos una reducción en el grupo T del sangrado posoperatorio, 1.165 ± 789 mL frente a 992 ± 662 mL (p = 0,17), y de la transfusión de hematíes, 694 ± 843 mL frente a 413 ± 605 mL (p = 0,03). El balance hídrico intraoperatorio y posoperatorio fue significativamente menos positivo en el grupo T, con un balance global de 2.292 ± 2.152 mL frente a 5.388 ± 2.834 mL (p < 0,001). Hubo valores superiores de hemoglobina y hematocrito intraoperatorio (p < 0,001), al ingreso en UCI (p = 0,001) y a las 6 h (p = 0,05) en el grupo T, e inferiores de INR a las 6 h (p = 0,01) y 24 h (p = 0,02). Las tasas de reintervención y estancia en UCI fueron superiores en el grupo C, pero no significativas. Conclusiones. El cebado del sistema de circulación extracorpórea con manitol, albúmina y Ringer lactato, asociado a ultrafiltración, mejora significativamente los balances hídricos intraoperatorio y posoperatorio y reduce el volumen de transfusión de sangre, con una repercusión no significativa sobre el sangrado posoperatorio, reintervenciones por sangrado y estancia en UCI (AU)

Objective. Assess the effectiveness of priming the extracorporeal circulation system with albumin-mannitol combined with ultrafiltration during extracorporeal circulation to reduce post-operative bleeding and transfusion requirements in heart surgery, as well as its impact on the fluid balance, coagulation and hematocrit parameters, re-operation for bleeding, ICU, and hospital length of stay. Material and methods. A total of 134 patients scheduled for heart surgery were randomized to receive Ringer's lactate 1,500 mL in the priming reservoir (group C), or mannitol 20% 250 mL, albumin 20% 150 mL and Ringer's lactate 1,100 mL combined with ultrafiltration (group T). Bleeding volume, transfusions, fluid balance, coagulation, and hematology parameters were determined until 48 h in the post-operative period. Results. There was a reduction of postoperative bleeding in group T, 1,165 ± 789 mL vs 992 ± 662 mL (P = .17), and red blood cell concentrate transfusions, 694 ± 843 mL vs 413 ± 605 mL (P = .03). Intra-operative and post-operative fluid balance was significantly less positive in group T, with an overall balance of 2,292 ± 2,152 mL vs 5,388 ± 2,834 mL (P < .001). There were higher values of hemoglobin and hematocrit, intraoperative (P < .001), on admission to ICU (P = .001), and at 6 h (P = .05) in group T, and lower INR at 6 h (P = .01) and 24 h (P = .02). Re-operation rate and length of stay in ICU were higher in group C, but not statiscally significant. Conclusions. The priming of extracorporeal reservoir with mannitol, albumin, and Ringer's lactate, combined with ultrafiltration, significantly improves intra- and post-operative fluid balance, resulting in a reduction in blood transfusions, with no significant decrease in post-operative bleeding, re-operation bleeding rate, and length of stay in the ICU (AU)

Dissolved and colloidal organic nitrogen removal from wastewater treatment plants effluents and reject waters using physical-chemical processes.

Four physical-chemical processes were compared in terms of the efficiencies of dissolved and colloidal organic nitrogen (DON and CON) removal from the secondary effluents (SE) and reject water from full-scale biological nutrient removal activated sludge systems. Adsorption on activated carbon was most efficient and allowed removal from the SE of up to 80% and 100% of DON and CON, respectively. High efficiencies of DON removal from SE (up to 55%) were also obtained when using coagulation with iron(III) chloride and calcium hydroxide at final pH = 11.0-11.5. The efficiency of DON removal from thickening waste activated sludge (TWAS) reject water, obtained using coagulation with iron(III) chloride, was comparable with the efficiency for the SE. The efficiency of this process with regard to the sludge digester liquors (SDL) was significantly higher, i.e., 65-70% for both DON and CON. The ion exchange process with strongly acidic cation exchange resin (without pH correction) resulted in a relatively small efficiency of DON removal (<15%), and negligible efficiency of CON removal (<10%). Furthermore, ultrafiltration (0.015 µm) of SE and TWAS reject water resulted in a relatively low efficiency of DON removal (10-13% and 10-20% respectively). Ultrafiltration was found to be more effective for DON removal from SDL (41-68%).

Optimization of flow field-flow fractionation for the characterization of natural colloids.

The methodological approach used to robustly optimize the characterization of the polydisperse colloidal phase of drain water samples is presented. The approach is based on asymmetric flow field-flow fractionation coupled to online ultraviolet/visible spectrophotometry, multi-angle light scattering, and inductively coupled plasma mass spectrometry. Operating factors such as the amount of sample injected and the ratio between main-flow and cross-flow rates were considered. The evaluation of the injection and fractionation steps was performed considering the polydispersity index and the contribution to the polydispersity of the plate height, the recovery, the retention ratio and the size range of the fractionated colloids. This approach allows the polydispersity of natural colloid samples to be taken into consideration to achieve the most efficient and representative fractionation. In addition to the size characterization, elemental analysis was also evaluated using the recovery, precision, and limits of detection and quantification relative to a trace element of interest (copper) in drain water. To complete this investigation, the potential application of the methodology was assessed using several independent drain water samples from different soils. The contribution of the polydispersity to the plate height ranges from 4.8 to 8.9 cm with a mean precision of 6%. The mean colloidal recovery was 81 ± 3 %, and the mean retention ratio was 0.043-0.062. The limits of detection and quantification for copper were 0.6 and 1.8 µg L(-1), respectively.

Central composite rotatable design for investigation of microwave-assisted extraction of okra pod hydrocolloid.

Microwave-assisted extraction (MAE) technique was employed to extract the hydrocolloid from okra pods (OPH). The optimal conditions for microwave-assisted extraction of OPH were determined by response surface methodology. A central composite rotatable design (CCRD) was applied to evaluate the effects of three independent variables (microwave power (X1: 100-500 W), extraction time (X2: 30-90 min), and extraction temperature (X3: 40-90 °C)) on the extraction yield of OPH. The correlation analysis of the mathematical-regression model indicated that quadratic polynomial model could be employed to optimize the microwave extraction of OPH. The optimal conditions to obtain the highest recovery of OPH (14.911±0.27%) were as follows: microwave power, 395.56 W; extraction time, 67.11 min and extraction temperature, 73.33 °C. Under these optimal conditions, the experimental values agreed with the predicted ones by analysis of variance. It indicated high fitness of the model used and the success of response surface methodology for optimizing OPH extraction. After method development, the DPPH radical scavenging activity of the OPH was evaluated. MAE showed obvious advantages in terms of high extraction efficiency and radical scavenging activity of extract within the shorter extraction time.

Magnetic separation of colloidal nanoparticle mixtures using a material specific peptide.

A material specific peptide bound to Fe2O3 facilitates the selective sequestration of Au from a colloidal mixture of Au and CdS nanoparticles; the Au-Fe2O3 precipitate can then be magnetically separated from the colloidal CdS, and the Au nanoparticles can be recovered upon release from the Fe2O3.