A supercritical fluid co-extract of turmeric powder and dried coconut shreds shows neuroprotection against AlCl3-induced Alzheimer's disease in rats through nose to brain delivery.

This study was aimed at investigating the neuroprotective potential of a co-extract obtained by supercritical fluid extraction (SFE) of turmeric powder and dried coconut shreds against aluminium chloride (AlCl3)-induced Alzheimer's disease (AD) in male Wistar rats. Fifty animals were allocated to five groups, which received saline (vehicle control, group 1), a combination of saline and aluminium chloride (AlCl3) (disease control, group 2), coconut oil (COO) (SFE extracted, treatment group 3), turmeric oleoresin (Cur) (SFE extracted, treatment group 4) and SFE co-extract of turmeric powder and coconut shreds (CurCOO) (treatment group 5). Animals were subjected to behavioural evaluation. In addition, the hippocampal section of the brain from all groups was subjected to biochemical, molecular and histopathological evaluations. The results showed CurCOO administered intranasally improved cognitive abilities, reversed histological alterations in the brain, reduced hippocampus inflammation studied through proinflammatory cytokine markers like TNF-α and IL-6 as compared to the disease control group. The impact of CurCOO on preventive neurodegeneration was also observed through a reduction in protein transcription factor NF-kB in the treated group 5 as compared to a disease control group. The effect of intranasal delivery of CurCOO on the neurons responsible for memory consolidation was evident from low acetylcholinesterase (AChE) enzyme activity in the treated groups with respect to AlCl3 induced group. Summarily, the results demonstrated intranasal delivery of CurCOO to show better efficacy than Cur and COO in preventing neurodegeneration associated with AlCl3 induced Alzheimer's disease.

Counterions determine uptake and effects of aluminum in human intestinal and liver cells.

Aluminum (Al) is highly abundant in the biosphere and can occur in different physico-chemical states. It is present in human food and undergoes transitions between dissolved and particulate species during the passage of the gastrointestinal tract. Moreover, in a complex matrix such as food different inorganic and organic counterions can affect the chemical behavior of Al following oral uptake. In this work, the effects of different counterions, namely chloride, citrate, sulfate, lactate and acetylacetonate, on Al uptake and toxicity in the human intestine are studied. The respective Al salts showed different dissolution behavior in biological media and formed nanoscaled particles correlating in reverse with the amount of their dissolved fraction. The passage through the intestinal barrier was studied using a Caco-2 Transwell® system, showing counterion-dependent variance in cellular uptake and transport. In addition, Al toxicity was investigated using Al species (Al3+, metallic Al0 and oxidic γAl2O3 nanoparticles) and counterions individually or in mixtures on Caco-2 and HepG2 cells. The strongest toxicity was observed using a combination of Al species, depending on solubility, and the lipophilic counterion acetylacetonate. Notably, only the combination of both led to toxicity, while both substances individually did not show toxic effects. A toxification of previously non-toxic Al-species by the presence of acetylacetonate is shown here for the first time. The dependency on the concentration of free Al ions was demonstrated using sodium hydrogen phosphate, which was able to counteract the toxic effects by complexing free Al ions. These findings, using Al salts as an example for a common food contaminant, underline the importance of a consideration of the chemical properties of human nutrition, especially dissolution and hydrophobicity, which can significantly influence the cellular uptake and effects of xenobiotic substances.

Spectroscopic glimpses of the transition state of ATP hydrolysis trapped in a bacterial DnaB helicase.

The ATP hydrolysis transition state of motor proteins is a weakly populated protein state that can be stabilized and investigated by replacing ATP with chemical mimics. We present atomic-level structural and dynamic insights on a state created by ADP aluminum fluoride binding to the bacterial DnaB helicase from Helicobacter pylori. We determined the positioning of the metal ion cofactor within the active site using electron paramagnetic resonance, and identified the protein protons coordinating to the phosphate groups of ADP and DNA using proton-detected 31P,1H solid-state nuclear magnetic resonance spectroscopy at fast magic-angle spinning > 100 kHz, as well as temperature-dependent proton chemical-shift values to prove their engagements in hydrogen bonds. 19F and 27Al MAS NMR spectra reveal a highly mobile, fast-rotating aluminum fluoride unit pointing to the capture of a late ATP hydrolysis transition state in which the phosphoryl unit is already detached from the arginine and lysine fingers.

Formulation and Characterization of Microcapsules Encapsulating PC12 Cells as a Prospective Treatment Approach for Parkinson's Disease.

Parkinson's disease (PD) is the second most common neurological disorder, associated with decreased dopamine levels in the brain. The goal of this study was to assess the potential of a regenerative medicine-based cell therapy approach to increase dopamine levels. In this study, we used rat adrenal pheochromocytoma (PC12) cells that can produce, store, and secrete dopamine. These cells were microencapsulated in the selectively permeable polymer membrane to protect them from immune responses. For fabrication of the microcapsules, we used a modified Buchi spray dryer B-190 that allows for fast manufacturing of microcapsules and is industrially scalable. Size optimization of the microcapsules was performed by systematically varying key parameters of the spraying device. The short- and long-term stabilities of the microcapsules were assessed. In the in vitro study, the cells were found viable for a period of 30 days. Selective permeability of the microcapsules was confirmed via dopamine release assay and micro BCA protein assay. We found that the microcapsules were permeable to the small molecules including dopamine and were impermeable to the large molecules like BSA. Thus, they can provide the protection to the encapsulated cells from the immune cells. Griess's assay confirmed the non-immunogenicity of the microcapsules. These results demonstrate the effective fabrication of microcapsules encapsulating cells using an industrially scalable device. The microcapsules were stable, and the cells were viable inside the microcapsules and were found to release dopamine. Thus, these microcapsules have the potential to serve as the alternative or complementary treatment approach for PD.

A molecular understanding of magnesium aluminium silicate - drug, drug - polymer, magnesium aluminium silicate - polymer nanocomposite complex interactions in modulating drug release: Towards zero order release.

This study reports the use of ITC in understanding the thermodynamics occurring for a controlled release system in which complexation has been exploited. In this study, a model drug, propranolol hydrochloride (PPN) was complexed with magnesium aluminium silicate (MAS) and these complexes were used in combination with polyethylene oxide (PEO) as a hydrophilic carrier at various concentrations to sustain the release of PPN. DSC, XRPD, ATR-FTIR and SEM/EDX were successfully used in characterising the produced complexes. 2D- SAXS data patterns for MAS and the produced complexes were shown to be symmetric and circular with the particles showing no preferred orientation at the nanometre scale. ITC studies showed differences between PPN adsorption onto MAS compared with PPN adsorption onto a MAS-PEO mixture. At both temperatures studied the binding affinity Ka was greater for the titration of PPN into the MAS-PEO mixture (5.37E + 04 ± 7.54E + 03 M at 25 °C and 8.63E + 04 ± 6.11E + 03 M at 37 °C), compared to the affinity obtained upon binding between PPN and MAS as previously reported suggesting a stronger binding with implications for the dissolution process. MAS-PPN complexes with the PEO polymer compacts displayed desired manufacturing and formulation properties for a formulator including, reduced plastic recovery therefore potentially reducing the risk of cracking/splitting and on tooling wear, controlled release of PPN at a significantly low (5%) polymer level as well as a zero-order release profile (case II transport) using up to 50% polymer level.

Binding of a Fatty Acid-Functionalized Anderson-Type Polyoxometalate to Human Serum Albumin.

The Anderson-type hexamolybdoaluminate functionalized with lauric acid (LA), (TBA)3[Al(OH)3Mo6O18{(OCH2)3CNHCOC11H23}]·9H2O (TBA-AlMo6-LA, where TBA = tetrabutylammonium), was prepared via two synthetic routes and characterized by thermogravimetric and elemental analyses, mass spectrometry, IR and 1H NMR spectroscopy, and powder and single-crystal X-ray diffraction. The interaction of TBA-AlMo6-LA with human serum albumin (HSA) was investigated via fluorescence and circular dichroism spectroscopy. The results revealed that TBA-AlMo6-LA binds strongly to HSA (63% quenching at an HSA/TBA-AlMo6-LA ratio of 1:1), exhibiting static quenching. In contrast to TBA-AlMo6-LA, the nonfunctionalized polyoxometalate, Na3(H2O)6[Al(OH)6Mo6O18]·2H2O (AlMo6), showed weak binding toward HSA (22% quenching at a HSA/AlMo6 ratio of 1:25). HSA binding was confirmed by X-ray structure analysis of the HSA-Myr-AlMo6-LA complex (Myr = myristate). These results provide a promising lead for the design of novel polyoxometalate-based hybrids that are able to exploit HSA as a delivery vehicle to improve their pharmacokinetics and bioactivity.

Spatial distribution and identification of bacteria in stressed environments capable to weather potassium aluminosilicate mineral.

In the present study, we studied the distribution of silicate mineral weathering bacteria (SWB) in stressed environments that release potassium from insoluble source of mineral. Out of 972 isolates, 340 isolates were positive and mineral weathering potential ranged from 5.55 to 180.05%. Maximum abundance of SWB occurred 44.71% in saline environment followed by 23.53% in low temperature and 12.35% each in high temperature and moisture deficit. Among isolates, silicate mineral weathering efficiency ranged from 1.9 to 72.8 µg mL-1 available K in liquid medium. The phylogenetic tree of SWB discriminated in three clusters viz. Firmicutes, Proteobacteria and Actinobacteria. This is the first report on SWB in stressed environments and identified 27 genera and 67 species which is not reported earlier. Among them Bacillus was the predominant genera (58.60%) distantly followed by Pseudomonas (6.37%), Staphylococcus (5.10%) and Paenibacillus (4.46%). These bacterial strains could be developed as inoculants for biological replenishment of K in stressed soils. Graphical abstract.

Hyperglycemic condition influence on mineral trioxide aggregate biocompatibility and biomineralization.

This study aimed to investigate in vitro and in vivo the influence of hyperglycemic condition on biocompatibility and biomineralization of gray mineral trioxide aggregate (GMTA) and white mineral trioxide aggregate (WMTA). For the in vitro study, fibroblast-like cells L929 were cultured under high or normal glucose concentration to investigate the effects of both MTA's on cell proliferation and inflammatory cytokines production IL-1ß, IL-6, and TNF-α. For the in vivo study, polyethylene tubes containing MTA materials and empty tubes were implanted into dorsal connective tissues of Wistar rats previously assigned normal and hyperglycemic. After 7 and 30 days, the tubes with surrounding tissues were removed and subjected to histological, fluorescence and immunohistochemical analyzes of IL-1ß, IL-6, and TNF-α. In vitro study showed that, under high glucose condition, GMTA reduced cell proliferation and IL-6 production compared with WMTA. Moreover, in vivo study revealed that hyperglycemic condition did not modify the inflammatory response and cytokines production in the tissue close to both materials. Independently of hyperglycemic status, mineralized areas were observed with both materials, but the fluorescence intensity of WMTA was diminished on 14 days in hyperglycemic animals. It is possible to conclude that GMTA was able to inhibit the proliferation rate and IL-6 production under high glucose concentration in vitro. Furthermore, cytokines production and inflammatory response were not upregulated in hyperglycemic animals; however, a decrease in the calcium deposition was observed in presence of WMTA, suggesting a delay in the mineralization process.

Taguchi's methods to optimize the properties and bioactivity of 3D printed polycaprolactone/mineral trioxide aggregate scaffold: Theoretical predictions and experimental validation.

Mineral trioxide aggregate (MTA) can provide bioactivity to poly-caprolactone (PCL), which is an inert polymer used to print scaffolds. However, testing all combinations of scaffold characteristics (e.g., composition, pore size, and distribution) to optimize properties of scaffolds is time-consuming and costly. The Taguchi's methods can identify characteristics that have major influences on the properties of complex designs, hence decreasing the number of combinations to be tested. The objective was to assess the potential of Taguchi's methods as a predictive tool for the optimization of bioactive scaffold printed using electro-hydro dynamic jetting. A three-level approach assessed the influence of PCL/MTA proportion, pore size, fiber dimension and number of layers in pH, degradation rate, porosity, yield strength, and Young's modulus. Data were analyzed using Tukey's honest significant difference test, analysis of mean and signal-to-noise ratio (S/N) test. Cytocompatibility and differentiation potential were assessed for 5 and 30 days using dental pulp stem cells and analyzed with one-way analysis of variance (proliferation) or Mann-Whitney (qPCR). The S/N ratio and analysis of mean showed that fiber diameter and composition were the most influential characteristics in all properties. The experimental data confirmed that the addition of MTA to PCL increased the pH and scaffold degradation. Only PCL and PCL with 4% MTA allowed cell proliferation. The latter increased the genetic expression of ALP, COL-1, OCN, and MSX-1. The theoretical predictions were confirmed by the experiments. The Taguchi's identified the inputs that can be disregarded to optimize 3D printed meshed bioactive scaffolds.

Tubes for detection of cholinesterase inhibitors-Unique effects of Neusilin on the stability of butyrylcholinesterase-impregnated carriers.

Detection tubes are small devices for the colorimetric enzymatic detection of cholinesterase inhibitors such as sarin, soman, VX nerve agents and substances denoted as Novichok. These detectors contain carriers in the form of pellets with immobilized cholinesterase, substrate and detection reagent. Their advantages are portability, sensitivity and simplicity, enabling fast detection of such compounds from air and water in case of a terrorist attack or war. In general, maintaining the stability of an enzyme for a longer time is very problematic; therefore, its further enhancement is required for safety and financial reasons. In this study, the stability of our patented carriers in the form of pellets with immobilized butyrylcholinesterase containing an increasing amount of the unique sorbent Neusilin® US2 was evaluated. The samples containing Neusilin maintained the stability of the immobilized enzyme for a longer time even at higher temperature and humidity than the currently commercially used carrier without Neusilin, allowing improved detection of nerve agents.

Increased urinary excretion of aluminium after ingestion of the food additive sodium aluminium phosphate (SALP) - a study on healthy volunteers.

Food is an important source of human aluminium (Al) exposure and regular consumption of foods containing Al-based food additives may result in high Al intakes above health-based tolerable intakes. However, some additives are Al salts with low solubility, and little is known about bioavailability of Al in these additives. We investigated urine Al concentrations in healthy adult volunteers (N = 18, women/men) before (base-line) and after 7 days of ingestion of pancakes with a low Al content (median: <0.5 mg Al/kg) and high Al content (median: 860 mg/kg). The high-Al pancakes contained the common additive sodium aluminium phosphate (SALP). The participants did not know if the pancakes contained SALP or not during the experiment. After adjusting for creatinine content of the urine samples, median base-line Al concentrations before pancake ingestion were in the range 30-40 µmol Al/mol creatinine. Urine Al concentrations after ingestion of low-Al pancakes (average intake: <0.042 Al mg/day) did not differ significantly from the base-line levels. After ingestion of high-Al pancakes (72 mg Al/day) the median Al concentration in urine was more than 2-fold higher than at the base-line sampling before the high-Al pancake ingestion. At the end of the experiment the volunteers ingested an Al-containing antacid (Al-OH, 1800 mg Al/day) for 7 days as a positive control of Al absorption. This caused a 10-fold increase in median urine Al concentration compared to base-line. Our results strongly suggest that Al in the form of SALP in a pancake mix is bioavailable for absorption in humans, which should be taken into account in risk assessment of Al in food in countries with a high use of SALP as a food additive.

Burkholderia and Paraburkholderia are Predominant Soybean Rhizobial Genera in Venezuelan Soils in Different Climatic and Topographical Regions.

The climate, topography, fauna, and flora of Venezuela are highly diverse. However, limited information is currently available on the characterization of soybean rhizobia in Venezuela. To clarify the physiological and genetic diversities of soybean rhizobia in Venezuela, soybean root nodules were collected from 11 soil types located in different topographical regions. A total of 395 root nodules were collected and 120 isolates were obtained. All isolates were classified in terms of stress tolerance under different concentrations of NaCl and Al3+. The tolerance levels of isolates to NaCl and Al3+ varied. Based on sampling origins and stress tolerance levels, 44 isolates were selected for further characterization. An inoculation test indicated that all isolates showed the capacity for root nodulation on soybean. Based on multilocus sequence typing (MLST), 20 isolates were classified into the genera Rhizobium and Bradyrhizobium. The remaining 24 isolates were classified into the genus Burkholderia or Paraburkholderia. There is currently no evidence to demonstrate that the genera Burkholderia and Paraburkholderia are the predominant soybean rhizobia in agricultural fields. Of the 24 isolates classified in (Para) Burkholderia, the nodD-nodB intergenic spacer regions of 10 isolates and the nifH gene sequences of 17 isolates were closely related to the genera Rhizobium and Bradyrhizobium, respectively. The root nodulation numbers of five (Para) Burkholderia isolates were higher than those of the 20 α-rhizobia. Furthermore, among the 44 isolates tested, one Paraburkholderia isolate exhibited the highest nitrogen-fixation activity in root nodules.

14-3-3γ binds regulator of G protein signaling 14 (RGS14) at distinct sites to inhibit the RGS14:Gαi-AlF4- signaling complex and RGS14 nuclear localization.

Regulator of G protein signaling 14 (RGS14) is a multifunctional brain scaffolding protein that integrates G protein and Ras/ERK signaling pathways. It is also a nucleocytoplasmic shuttling protein. RGS14 binds active Gαi/o via its RGS domain, Raf and active H-Ras-GTP via its R1 Ras-binding domain (RBD), and inactive Gαi1/3 via its G protein regulatory (GPR) domain. RGS14 suppresses long-term potentiation (LTP) in the CA2 region of the hippocampus, thereby regulating hippocampally based learning and memory. The 14-3-3 family of proteins is necessary for hippocampal LTP and associative learning and memory. Here, we show direct interaction between RGS14 and 14-3-3γ at two distinct sties, one phosphorylation-independent and the other phosphorylation-dependent at Ser-218 that is markedly potentiated by signaling downstream of active H-Ras. Using bioluminescence resonance energy transfer (BRET), we show that the pSer-218-dependent RGS14/14-3-3γ interaction inhibits active Gαi1-AlF4- binding to the RGS domain of RGS14 but has no effect on active H-Ras and inactive Gαi1-GDP binding to RGS14. By contrast, the phosphorylation-independent binding of 14-3-3 has no effect on RGS14/Gαi interactions but, instead, inhibits (directly or indirectly) RGS14 nuclear import and nucleocytoplasmic shuttling. Together, our findings describe a novel mechanism of negative regulation of RGS14 functions, specifically interactions with active Gαi and nuclear import, while leaving the function of other RGS14 domains intact. Ongoing studies will further elucidate the physiological function of this interaction between RGS14 and 14-3-3γ, providing insight into the functions of both RGS14 and 14-3-3 in their roles in modulating synaptic plasticity in the hippocampus.

Bone impairment caused by AlCl3 is associated with activation of the JNK apoptotic pathway mediated by oxidative stress.

Exposure to aluminum (Al) inhibits bone formation, the principal mechanism possibly due to oxidative stress. However, little data is available that establishes the precise relationship. In this study, Wistar rats were exposed to 0 (GC), 0.4 (GL), 0.8 (GM) or 1.6 (GH) mg/L aluminum trichloride (AlCl3) in drinking water for 90 days, respectively. The concentrations of Al in serum and bone, serum markers of bone metabolism, bone mineral density (BMD) and body weight were measured. Histological changes within femurs were observed by H&E, ALP, and TRACP staining. Oxidative stress markers and JNK apoptotic pathway were detected in bone. The results indicate that AlCl3 exposure decreased BMD, numbers of ALP-positive osteoblasts and serum levels of bone formation markers (B-ALP, PICP and BGP), and caused damaged to the trabecular structure. Serum levels of bone resorption markers (TRACP-5b, CTX-I) and numbers of TRACP-positive osteoclasts increased in GL, but conversely, they decreased in GM and GH. In addition, AlCl3 caused oxidative stress, up-regulated expression of c-Jun and pro-apoptotic factors with increased p-JNK/JNK ratio and down-regulated expression of anti-apoptotic factor Bcl-2 in bone. Taken together, these results indicate that bone impairment caused by AlCl3 is associated with activation of the oxidative stress-mediated JNK apoptotic pathway.

Critical analysis of reference studies on the toxicokinetics of aluminum-based adjuvants.

We reviewed the three toxicokinetic reference studies commonly used to suggest that aluminum (Al)-based adjuvants are innocuous. A single experimental study was carried out using isotopic 26Al (Flarend et al., Vaccine, 1997). This study used aluminum salts resembling those used in vaccines but ignored adjuvant uptake by cells that was not fully documented at the time. It was conducted over a short period of time (28days) and used only two rabbits per adjuvant. At the endpoint, Al elimination in the urine accounted for 6% for Al hydroxide and 22% for Al phosphate, both results being incompatible with rapid elimination of vaccine-derived Al in urine. Two theoretical studies have evaluated the potential risk of vaccine Al in infants, by reference to an oral "minimal risk level" (MRL) extrapolated from animal studies. Keith et al. (Vaccine, 2002) used a high MRL (2mg/kg/d), an erroneous model of 100% immediate absorption of vaccine Al, and did not consider renal and blood-brain barrier immaturity. Mitkus et al. (Vaccine, 2011) only considered solubilized Al, with erroneous calculations of absorption duration. Systemic Al particle diffusion and neuro-inflammatory potential were omitted. The MRL they used was both inappropriate (oral Al vs. injected adjuvant) and still too high (1mg/kg/d) regarding recent animal studies. Both paucity and serious weaknesses of reference studies strongly suggest that novel experimental studies of Al adjuvants toxicokinetics should be performed on the long-term, including both neonatal and adult exposures, to ensure their safety and restore population confidence in Al-containing vaccines.

Quantitative Analysis of Vaccine Antigen Adsorption to Aluminum Adjuvant Using an Automated High-Throughput Method.

Aluminum-containing adjuvants have been widely used in vaccine formulations to safely and effectively potentiate the immune response. The examination of the extent of antigen adsorption to aluminum adjuvant is always evaluated during the development of aluminum adjuvant containing vaccines. A rapid, automated, high-throughput assay was developed to measure antigen adsorption in a 96-well plate format using a TECAN Freedom EVO® (TECAN). The antigen adsorption levels at a constant adjuvant concentration for each sample were accurately measured at 12 antigen/adjuvant (w/w) formulation ratios. These measurements were done at aluminum adjuvant concentrations similar to normal vaccine formulations, unlike previous non-automated and automated adjuvant adsorption studies. Two high-sensitivity analytical methods were used to detect the non-absorbed antigens. The antigen-to-adjuvant adsorption curves were fit to a simple Langmuir adsorption model for quantitatively analyzing the antigen to the adjuvant adsorption level and strength. The interaction of two model antigens, bovine serum albumin and lysozyme, with three types of aluminum adjuvant, were quantitatively analyzed in this report. Automated, high-throughput methodologies combined with sensitive analytical methods are useful for accelerating practical vaccine formulation development.LAY ABSTRACT: Vaccines are probably the most effective public health method to prevent epidemics of many infectious diseases. Many of the most effective vaccines contain aluminum adjuvant. This report describes novel technology that can be used to better optimize the efficacy and stability of aluminum adjuvant-containing vaccines.

Investigation of Dissolution Behavior HPMC/Eudragit®/Magnesium Aluminometasilicate Oral Matrices Based on NMR Solid-State Spectroscopy and Dynamic Characteristics of Gel Layer.

Burst drug release is often considered a negative phenomenon resulting in unexpected toxicity or tissue irritation. Optimal release of a highly soluble active pharmaceutical ingredient (API) from hypromellose (HPMC) matrices is technologically impossible; therefore, a combination of polymers is required for burst effect reduction. Promising variant could be seen in combination of HPMC and insoluble Eudragits® as water dispersions. These can be applied only on API/insoluble filler mixture as over-wetting prevention. The main hurdle is a limited water absorption capacity (WAC) of filler. Therefore, the object of this study was to investigate the dissolution behavior of levetiracetam from HPMC/Eudragit®NE matrices using magnesium aluminometasilicate (Neusilin® US2) as filler with excellent WAC. Part of this study was also to assess influence of thermal treatment on quality parameters of matrices. The use of Neusilin® allowed the application of Eudragit® dispersion to API/Neusilin® mixture in one step during high-shear wet granulation. HPMC was added extragranularly. Obtained matrices were investigated for qualitative characteristics, NMR solid-state spectroscopy (ssNMR), gel layer dynamic parameters, SEM, and principal component analysis (PCA). Decrease in burst effect (max. of 33.6%) and dissolution rate, increase in fitting to zero-order kinetics, and paradoxical reduction in gel layer thickness were observed with rising Eudragit® NE concentration. The explanation was done by ssNMR, which clearly showed a significant reduction of the API particle size (150-500 nm) in granules as effect of surfactant present in dispersion in dependence on Eudragit®NE amount. This change in API particle size resulted in a significantly larger interface between these two entities. Based on ANOVA and PCA, thermal treatment was not revealed as a useful procedure for this system.

Study of potential transfer of aluminum to the brain via the olfactory pathway.

Many employees in the aluminum industry are exposed to a range of aluminum compounds by inhalation, and the presence of ultrafine particles in the workplace has become a concern to occupational health professionals. Some metal salts and metal oxides have been shown to enter the brain through the olfactory route, bypassing the blood-brain barrier, but few studies have examined whether aluminum compounds also use this pathway. In this context, we sought to determine whether aluminum was found in rat olfactory bulbs and whether its transfer depended on physicochemical characteristics such as solubility and granulometry. Aluminum salts (chloride and fluoride) and various nanometric aluminum oxides (13nm, 20nm and 40-50nm) were administered to rats by intranasal instillation through one nostril (10µg Al/30µL for 10days). Olfactory bulbs (ipsilateral and contralateral relative to instilled nostril) were harvested and the aluminum content was determined by graphite furnace atomic absorption spectrometry after tissue mineralization. Some transfer of aluminum salts to the central nervous system via the olfactory route was observed, with the more soluble aluminum chloride being transferred at higher levels than aluminum fluoride. No cerebral translocation of any of the aluminas studied was detected.

Controlled release of lovastatin from poly(lactic-co-glycolic acid) nanoparticles for direct pulp capping in rat teeth.

Statin at appropriate concentrations has been shown to induce odontoblastic differentiation, dentinogenesis, and angiogenesis. However, using a carrier to control statin release might reduce toxicity and enhance its therapeutic effects. The aim of this study was to prepare poly(d,l-lactide-co-glycolide acid) (PLGA) nanoparticles that contain lovastatin for application in direct pulp capping. The PLGA-lovastatin particle size was determined using dynamic light scattering measurements and transmission electron microscopy. In addition, the release of lovastatin was quantified using a UV-Vis spectrophotometer. The cytotoxicity and alkaline phosphatase (ALP) activity of PLGA-lovastatin nanoparticles on human dental pulp cells were investigated. Moreover, a real-time polymerase chain reaction (PCR) assay, Western blot analysis, and an enzyme-linked immunosorbent assay (ELISA) were used to examine the osteogenesis gene and protein expression of dentin sialophosphoprotein (DSPP), dentin matrix acidic phosphoprotein 1 (DMP1), and osteocalcin (OCN). Finally, PLGA-lovastatin nanoparticles and mineral trioxide aggregate (MTA) were compared as direct pulp capping materials in Wistar rat teeth. The results showed that the median diameter of PLGA-lovastatin nanoparticles was 174.8 nm and the cumulative lovastatin release was 92% at the 44th day. PLGA-lovastatin nanoparticles demonstrated considerably a lower cytotoxicity than free lovastatin at 5, 9, and 13 days of culture. For ALP activity, the ALP amount of PLGA-lovastatin (100 µg/mL) was significantly higher than that of the other groups for 9 and 13 days of culture. The real-time PCR assay, Western blot analysis, and ELISA assay showed that PLGA-lovastatin (100 µg/mL) induced the highest mRNA and protein expression of DSPP, DMP1, and OCN in pulp cells. Histological evaluation of the animal studies revealed that MTA was superior to the PLGA-lovastatin in stimulating the formation of tubular dentin in an observation period of 2 weeks. However, in an observation period of 4 weeks, it was evident that the PLGA-lovastatin and MTA were competitive in the formation of tubular reparative dentin and a complete dentinal bridge.

The Characteristics of Mineral Trioxide Aggregate/Polycaprolactone 3-dimensional Scaffold with Osteogenesis Properties for Tissue Regeneration.

INTRODUCTION: The aim of this study was to investigate whether the mineral trioxide aggregate/polycaprolactone (MTA/PCL) hybrid 3-dimensional (3D) scaffold supplies a suitable microenvironment for the osteogenic differentiation of human dental pulp cells (hDPCs) and to further consider the effect of the MTA/PCL composite on the biological performance of hybrid scaffolds. METHODS: MTA was suspended in absolute alcohol and dropped slowly into PCL that was generated with the printable MTA-matrix. Then, the MTA/PCL composite was prepared into highly uniform scaffolds with controlled macropore sizes and structure using a 3D printing technique. Mechanical properties and the apatite precipitation of the scaffolds were evaluated as well as the cell response to the scaffolds by culturing hDPCs. RESULTS: The results showed that the MTA/PCL 3D scaffold had uniform, 450-µm, high-porosity (70%) macropores and a compressive strength of 4.5 MPa. In addition, the MTA/PCL scaffold could effectively promote the adhesion, proliferation, and differentiation of hDPCs. CONCLUSIONS: The 3D-printed MTA/PCL scaffolds not only exhibited excellent physical and chemical properties but also enhanced osteogenesis differentiation. All of the results support the premise that this MTA/PCL porous scaffold would be a useful biomaterial for application in bone tissue engineering.