Light-driven dissipative self-assembly of a peptide hydrogel.

Light energy provides an attractive fuel source for energy dissipating systems because of the lack of waste production, wavelength tunability and the potential for spatial and temporal resolution. In this work, we describe a peptide-spiropyran conjugate that assembled into a transient nanofiber hydrogel in the presence of visible light, and dissociated when the light source was removed.

Stimuli-Responsive Metal-Organic Framework on a Metal-Organic Framework Heterostructure for Efficient Antibiotic Detection and Anticounterfeiting.

Stimuli-responsiveness is an important characteristic that show promising potential in various applications. Herein, a novel ZIF-8-on-Tb-dpn (H3dpn = 5-(2',4'-dicarboxylphenyl)nicotic acid) heterostructure is constructed using a heteroepitaxial strategy combining the chemical-responsive (antibiotics) and light-responsive behaviors. The pyridine nitrogen of Tb-dpn acts as an anchor site for Zn2+, which helps to overcome the limit of lattice mismatch between two metal-organic frameworks (MOFs) and promotes the growth of ZIF-8 nanocrystals. Based on the synergy effect of two MOFs, ZIF-8-on-Tb-dpn exhibits an efficient turn-off response toward tetracycline and chloramphenicol via competitive absorption, Förster resonance energy transfer, and photoinduced electron transfer processes with limit of detection values of 5.6 and 37.6 nM, respectively, which are three- to -fivefold lower than those of Tb-dpn. Moreover, the nanocage of ZIF-8 is utilized to encapsulate photochromic spiropyran (SP) molecules and realize the reversible conversion between SP and merocyanine (MC) under visible light and ultraviolet light. The MC form is accompanied with strong adsorption at 555 nm, which can erase the emission of Tb3+. Therefore, a reversible invisible anticounterfeiting pattern is designed with SP ⊂ ZIF-8-on-Tb-dpn for information anticounterfeiting. The excellent stimuli-responsive ability makes the luminescent platform a potential candidate in luminescence applications.

Light-activated "cycle-reversible intramolecular charge transfer" fluorescent probe: monitoring of pHi trace change induced by UV light in programmed cell death.

Under the synergistic effects of protonation and deprotonation, a light-activated fluorescent probe (UV-SP) exhibited "cycle-reversible intramolecular charge transfer (ICT)" for different pH after activation by UV light, resulting in emission of multiple ratio fluorescent signals (FI563/FI595 and FI664/FI595). Based on these kinds of response signals, UV-SP can specifically monitor the cycle-reversible trace change of intracellular pH caused by UV radiation. More importantly, according to the stable and invariant multiple ratio fluorescent signals, UV-SP can sort cells entering programmed death.

Caged cyclopropenes for controlling bioorthogonal reactivity.

Bioorthogonal ligations have been designed and optimized to provide new experimental avenues for understanding biological systems. Generally, these optimizations have focused on improving reaction rates and orthogonality to both biology and other members of the bioorthogonal reaction repertoire. Less well explored are reactions that permit control of bioorthogonal reactivity in space and time. Here we describe a strategy that enables modular control of the cyclopropene-tetrazine ligation. We developed 3-N-substituted spirocyclopropenes that are designed to be unreactive towards 1,2,4,5-tetrazines when bulky N-protecting groups sterically prohibit the tetrazine's approach, and reactive once the groups are removed. We describe the synthesis of 3-N spirocyclopropenes with an appended electron withdrawing group to promote stability. Modification of the cyclopropene 3-N with a bulky, light-cleavable caging group was effective at stifling its reaction with tetrazine, and the caged cyclopropene was resistant to reaction with biological nucleophiles. As expected, upon removal of the light-labile group, the 3-N cyclopropene reacted with tetrazine to form the expected ligation product both in solution and on a tetrazine-modified protein. This reactivity caging strategy leverages the popular carbamate protecting group linkage, enabling the use of diverse caging groups to tailor the reaction's activation modality for specific applications.

Luminescence switching of CdTe quantum dots in presence of water-soluble spironaphthoxazine.

The typical reaction of spironaphthoxazine is the conversion between the non-polar spiro form and polar merocyanine form. Quantum dots (QDs) have unique optical properties and several advantages over conventional organic dyes. In this work, the CdTe QDs containing a water-soluble spironaphthoxazine was used as the optical probe photoisomerization between spiro and merocyanine. The initial bright fluorescence of CdTe QDs was effectively quenched by water-soluble spironaphthoxazine using UV irradiation. Reversible modulation of fluorescence intensity of CdTe QDs was achieved using alternating irradiation with UV and visible light. The possible mechanism is discussed.

Sonochemical multi-component synthesis of spirooxindoles.

New and efficient multi-component methods have been developed for the synthesis of spirooxindoles in the presence of a catalytic amount of p-TSA as an inexpensive and available catalyst in EtOH under ultrasound irradiation. The method is simple, starts from readily accessible commercial starting materials, and provides biologically interesting products in good yields and short reaction times.

Ultrasound-promoted synthesis of novel dispirocyclic frameworks from aza-Claisen rearrangements of Baylis-Hillman amines.

A novel tetracyclic frameworks of dispiropyrrolizidines can be obtained in moderate to good yields via the 1,3-dipolar cycloaddition of azomethine ylides with dipolarophiles derived from aza-Claisen rearrangement of Baylis-Hillman amines. The transformations are highly regioselective and stereoselective, affording the desired compounds in reduced time and increased yields under ultrasound irradiation at room temperature. All the products are confirmed by 1H, 13C NMR, IR and MS spectra, while their molecular structures are elucidated by X-ray crystallography of a selected sample.

Stable spiro-endoperoxides by sunlight-mediated photooxygenation of 1,2-O-alkylidene-5(E)-eno-5,6,8-trideoxy-alpha-D-xylo-oct-1,4-furano-7-uloses.

Sunlight-mediated photooxygenation of 3-O-acetyl and 3-O-methyl derivatives of 1,2-O-alkylidene-5(E)-eno-5,6,8-trideoxy-alpha-D-xylo-oct-1,4-furano-7-uloses (1a-e) in carbon tetrachloride solution gave stable 4,7-epidioxy derivatives in 4R (2a-e) and 4S (3a-e) configurations. The presence of an endo alkyl, on the 1,2-O-alkylidene group and its size, resulted in an increase of the yield of the 4S isomers. 3-O-acetyl derivatives yielded products as a mixture of C-7 anomers, whereas 3-O-methyl derivatives gave pure single stereoisomers.

Photochromism of a spirooxazine in the single crystalline phase.

The single crystals of a closed form spirooxazine spiro[azahomoadamantane-isoquinolinoxazine] were found for the first time to undergo photocoloration processes consistent with photochromism in the single crystalline phase.

Photopolymerization of developmental monomers for dental cationically initiated matrix resins.

OBJECTIVES: The objectives were to investigate the structure and selected physical properties of products resulting from the photopolymerization of a binary mixture containing an aliphatic dioxirane, 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate (ECHM-ECHC) and a potential expanding monomer, 3,9-bis(oxiranylcyclohexylmethyl)-1,5,7,11-tetraoxaspiro[5.5]undecane (BOCHM-TOSU). METHODS: Reaction mixtures were irradiated with a dental curing lamp at room temperature. Some reactions were quenched prior to gel point. Oligomeric products were separated from unreacted monomers by column chromatography, and analyzed by NMR. Physical properties of polymeric solids were measured using accepted standard methods. Protonation energies for monomers were calculated using semi-empirical quantum mechanical methods. RESULTS: Types of oligomers found included poly(ether)s and poly(carbonate)s. Quantum mechanical calculations indicated preferential attack at the more nucleophilic oxaspirocyclic ring sites. For cured solid polymer samples, the elastic modulus was 2.39 +/- 0.24 GPa and the fracture toughness was 0.73 +/- 0.10 MPa m(1/2). These values were similar to those measured for a cured conventional BISGMA/TEGDMA matrix resin. SIGNIFICANCE: The room-temperature photopolymerization of an aliphatic dioxirane and a potential expanding monomer demonstrates the possibility of making cross-linked copolymer resins with improved polymerization shrinkage characteristics for use in dental composites.

Radiation dosimetry using three-dimensional optical random access memories.

Three-dimensional optical random access memories (3D ORAMs) are a new generation of high-density data storage devices. Binary information is stored and retrieved via a light induced reversible transformation of an ensemble of bistable photochromic molecules embedded in a polymer matrix. This paper describes the application of 3D ORAM materials to radiation dosimetry. It is shown both theoretically and experimentally, that ionizing radiation in the form of heavy charged particles is capable of changing the information originally stored on the ORAM material. The magnitude and spatial distribution of these changes are used as a measure of the absorbed dose, particle type and energy. The effects of exposure on 3D ORAM materials have been investigated for a variety of particle types and energies, including protons, alpha particles and 12C ions. The exposed materials are observed to fluoresce when exposed to laser light. The intensity and the depth of the fluorescence is dependent on the type and energy of the particle to which the materials were exposed. It is shown that these effects can be modeled using Monte Carlo calculations. The model provides a better understanding of the properties of these materials. which should prove useful for developing systems for charged particle and neutron dosimetry/detector applications.