Silver diamine fluoride in preventing enamel erosion: An in vitro study with salivary pellicle.

OBJECTIVES: To compare the prevention of enamel erosion and discolouring effect with a single and two weekly topical applications of silver diamine fluoride (SDF) solution. METHODS: Human enamel blocks were divided into four groups. Group 1 (SDF2) received two weekly applications of SDF solution (Advantage Arrest: 260,000 ppm Ag, 44,300 ppm F, pH 9.1). Group 2 (SDF1) received a single application of SDF solution. Group 3 (SNF, Positive Control) received daily application of stannous-chloride/amine-fluoride/sodium-fluoride solution (Elmex® Enamel professional: 800 ppm Sn(II), 500 ppm F, pH 4.5). Group 4 (DW, Negative Control) received daily application of deionised water. The treated blocks were subjected to a 14-day erosive challenge. Crystal characteristics, elemental composition, surface morphology, percentage of surface microhardness loss (%SMHL), surface loss, and total colour change (ΔE) of the blocks were investigated using X-ray diffraction (XRD), energy-dispersive spectrometry (EDS) and scanning electron microscopy (SEM), Vickers' hardness testing, non-contact profilometry, and digital spectrophotometry, respectively. RESULTS: XRD and EDS revealed precipitates of silver for SDF2 and SDF1 and tin for SNF. SEM showed prominent etched enamel pattern on DW than the other three groups. The%SMHL (%) of SDF2, SDF1, SNF, and DW were 26.6 ± 2.9, 33.6 ± 2.8, 38.9 ± 2.9, and 50.5 ± 2.8 (SDF2SDF1=SNF>DW, p < 0.05). CONCLUSION: Two weekly applications was more effective than a single application of SDF in preventing enamel erosion, though it caused more discolouration. CLINICAL SIGNIFICANCE: Topical application of 38 % SDF with two weekly applications protocol is effective in preventing enamel erosion.

Experimental toothpastes containing ß-TCP nanoparticles functionalized with fluoride and tin to prevent Erosive Tooth Wear.

OBJECTIVES: The present study aimed to synthesize toothpastes containing Beta- TriCalcium Phosphate (ß-TCP) nanoparticles, functionalized with fluoride and tin, and test their ability to reduce erosive tooth wear (ETW). METHODS: Toothpastes were synthesized with the following active ingredients: 1100 ppm of fluoride (as sodium fluoride, F-), 3500 ppm of tin (as stannous chloride, Sn2+), and 800 ppm of ß-TCP (Sizes a - 20 nm; and b - 100 nm). Enamel specimens were randomly assigned into the following groups (n = 10): 1. Commercial toothpaste; 2. Placebo; 3 F-; 4. F- + ß-TCPa; 5. F- + ß-TCPb; 6. F- + Sn2+; 7. F- + Sn2+ + ß-TCPa and 8. F- + Sn2+ + ß-TCPb. Specimens were subjected to erosion-abrasion cycling. Surface loss (in µm) was measured by optical profilometry. Toothpastes pH and available F- were also assessed. RESULTS: Brushing with placebo toothpaste resulted in higher surface loss than brushing with F- (p = 0.005) and F- + ß-TCPb (p = 0.007); however, there was no difference between F- and F- + ß-TCPb (p = 1.00). Commercial toothpaste showed no difference from Placebo (p = 0.279). The groups F-, F- + ß-TCPa, F- + ß-TCPb, F- + Sn2+, F- + Sn2+ + ß-TCPa and F- + Sn2+ + ß-TCPb were not different from the commercial toothpaste (p > 0.05). Overall, the addition of ß-TCP reduced the amount of available fluoride in the experimental toothpastes. The pH of toothpastes ranged from 4.97 to 6.49. CONCLUSIONS: Although toothpaste containing ß-TCP nanoparticles protected enamel against dental erosion-abrasion, this effect was not superior to the standard fluoride toothpaste (commercial). In addition, the functionalization of ß-TCP nanoparticles with fluoride and tin did not enhance their protective effect. CLINICAL SIGNIFICANCE: Although ß-TCP nanoparticles have some potential to control Erosive Tooth Wear, their incorporation into an experimental toothpaste appears to have a protective effect that is similar to a commercial fluoride toothpaste.

The effect of CO2 9.3 µm short-pulsed laser irradiation in enamel erosion reduction with and without fluoride applications-a randomized, controlled in vitro study.

The aim of this in vitro study was to evaluate the protective effect of short-pulsed CO2 9.3 µm laser irradiation against erosion in human enamel without and combined with TiF4 and AmF/NaF/SnCl2 applications, respectively, as well as compared to the protective effect of these fluoride treatments alone. After polishing, ninety enamel samples (3 × 3mm) were used for 9 different treatment groups: 4% TiF4 gel (pH 1.5, 24,533 ppm F-); AmF/NaF/SnCl2 rinse (pH 4.5; 500 ppm F-, 800 ppm Sn2); CO2 laser (average power 0.58 W); CO2 laser (0.58 W) + TiF4; CO2 laser (0.58 W) + AmF/NaF/SnCl2; CO2 laser (0.69 W); CO2 laser (0.69 W) + TiF4; CO2 laser (0.69 W) + AmF/NaF/SnCl2; negative control (deionized water). TiF4 gel was brushed on only once before the first erosive cycling, while samples treated with AmF/NaF/SnCl2 were daily immersed in 5 ml of the solution before cycling. Laser treatment occurred with a CO2 laser (wavelength 9.3 µm, pulse repetition rate 100 Hz, pulse duration 14.6 µs/18 µs, average power 0.58 W/0.69 W, fluence 1.9 J/cm2/2.2 J/cm2, beam diameter 0.63 mm, irradiation time 10 s, air cooling). TiF4 was applied only once, while AmF/NaF/SnCl2 was applied once daily before the erosive challenge. Surface loss (in µm) was measured with optical profilometry immediately after treatment, and after 5 and 10 days of erosive cycling (0.5% citric acid, pH 2.3, 6 × 2 min/day). Additionally, scanning electron microscopy investigations were performed. All application measures resulted in loss of surface height immediately after treatment. After 5 days, significantly reduced surface loss was observed after applying laser irradiation (both power settings) followed by applications of TiF4 or AmF/NaF/SnCl2 solution (p < 0.05; 2-way ANOVA and Tukey test) compared to fluoride application alone. After 10 days, compared to after 5 days, a reduced tissue loss was observed in all groups treated with AmF/NaF/SnCl2 solution. This tissue gain occurred with the AmF/NaF/SnCl2 application alone and was significantly higher when the application was combined with the laser use (p < 0.05). Short-pulsed CO2 9.3 µm laser irradiation followed by additional application of AmF/NaF/SnCl2 solution significantly reduces the progression of dental enamel erosion in vitro.

Protection Against Discolouration by Two Over-the Counter Desensitising Products.

PURPOSE: To determine in vitro the protection potential against discolouration of two OTC (over-the-counter) desensitising products on enamel and dentin in comparison to a standard toothpaste and water by means of a spectrophotometer. MATERIALS AND METHODS: A total of 96 samples of bovine enamel-dentin complex and 48 of bovine dentin were alternatively immersed in red wine, tea, coffee or water after having been treated by a sodium monofluorophosphate- and calcium phosphate-based product (Curodont Protect), an amine fluoride-based toothpaste (Elmex Red), a stannous chloride-based toothpaste (Elmex Protection Erosion) or distilled water (negative control). Initial (T0) and final colour (T1, after 4 weeks of immersion in staining solutions) of each specimen were assessed by a spectrophotometer. Statistical analysis was done by means of repeated measures ANOVA followed by Fisher's LSD post-hoc test. Differences between T0 and T1 were considered stastistically significant at p ≤ 0.05. RESULTS: When enamel samples were measured over a black background, ΔE00 values (T0-T1) varied from 2.2 (SD 0.7) for amine fluoride-based product/water to 53.9 (SD 7.6) for amine fluoride-based-product/red wine. When dentin samples were measured over a black background, ΔE00 values (T0-T1) varied from 5.4 (SD 0.9) stannous chloride based product/water to 61.6 (SD 3.7) amine fluoride-based product/red wine. CONCLUSION: Specifically, the application of the sodium monofluorophosphate was able to statistically significantly (p ≤ 0.05) reduce discolouration induced by the staining solutions tested only on the enamel-dentin complex, while distilled water and the stannous fluoride-based product were able to statistically significantly (p ≤ 0.05) reduce discolouration induced by the staining solutions tested in pure dentin samples.

Effect of an experimental mouth rinse containing NaF and TiF4 on tooth erosion and abrasion in situ.

OBJECTIVE: This study compared the effect of an experimental NaF/TiF4 mouth rinse with a commercial tin/F mouth rinse on the prevention of tooth wear in situ. METHODS: Fifteen subjects took part in this crossover and double-blind study, in which they wore a palatal appliance with 8 bovine teeth samples (4 enamel and 4 root dentine) in each of 3 phases (5 days each). Half of the samples were subjected to erosive challenges, and the other half to erosive plus abrasive challenges. The phases corresponded to the use of 1) Experimental solution containing NaF/TiF4 (189 ppm Ti+4, 500 ppm F-, pH 4.4); 2) commercial solution containing SnCl2/NaF/AmF (800 ppm Sn+2, 500 ppm F-, pH 4.5, Elmex®/GABA, positive control); 3) distilled water (negative control). Erosive challenges were performed using 0.1% citric acid (pH 2.5) for 90 s 4 times per day. The abrasion was done using a toothbrush and slurry of fluoride toothpaste, for 15 s 2 times per day. Thereafter, the subjects rinsed with the tested mouth rinse for 60s. Tooth wear was measured using contact profilometry (µm) and submitted to a two-way RM ANOVA/Bonferroni test (p < 0.05). RESULTS: No significant differences were detected between the experimental and the commercial mouth rinses, regardless of the challenge. Both fluoride mouth rinses were able to significantly reduce tooth wear compared to the negative control (p < 0.0001). No significant differences were detected with respect to tooth wear between the challenges (erosion and erosion plus abrasion). CONCLUSION: The experimental NaF/TiF4 mouth rinse has a similar protective effect to the commercial one against tooth wear in situ. CLINICAL SIGNIFICANCE: The experimental NaF/TiF4 solution protected against tooth wear in situ, regardless of the challenge (erosion or erosion plus abrasion), for both enamel and dentine, similarly to a commercial solution (tin/F-Elmex®) applied for this proposal. This result supports the conduction of clinical trials and a possible application of this solution in the future.

Tin Tungstate Nanoparticles: A Photosensitizer for Photodynamic Tumor Therapy.

The nanoparticulate inorganic photosensitizer ß-SnWO4 is suggested for photodynamic therapy (PDT) of near-surface tumors via reiterated 5 min blue-light LED illumination. ß-SnWO4 nanoparticles are obtained via water-based synthesis and comprise excellent colloidal stability under physiological conditions and high biocompatibility at low material complexity. Antitumor and antimetastatic effects were investigated with a spontaneously metastasizing (4T1 cells) orthotopic breast cancer BALB/c mouse model. Besides protamine-functionalized ß-SnWO4 (23 mg/kg of body weight, in PBS buffer), chemotherapeutic doxorubicin was used as positive control (2.5 mg/kg of body weight, in PBS buffer) and physiological saline (DPBS) as a negative control. After 21 days, treatment with ß-SnWO4 resulted in a clearly inhibited growth of the primary tumor (all tumor volumes below 3 cm(3)) as compared to the doxorubicin and DPBS control groups (volumes up to 6 cm(3)). Histological evaluations of lymph nodes and lungs as well as the volume of ipsilateral lymph nodes show a remarkable antimetastatic effect being similar to chemotherapeutic doxorubicin but-according to blood counts-at significantly reduced side effects. On the basis of low material complexity, high cytotoxicity under blue-light LED illumination at low dark and long-term toxicity, ß-SnWO4 can be an interesting addition to PDT and the treatment of near-surface tumors, including skin cancer, esophageal/gastric/colon tumors as well as certain types of breast cancer.

Efficacy of stannous, fluoride and their their combination in dentin erosion prevention in vitro.

The aim of this study was to compare the protective effects of solutions containing stannous (Sn), fluoride (F) and their combination in the prevention of dentin erosion. Forty bovine root dentin specimens (4'4'2 mm(3)) were prepared and randomly assigned to 4 groups (n = 10): SnCl2 (800 ppm/6.7 mM Sn), NaF (250 ppm/13 mM F), NaF/SnCl2 (800 ppm/6.7 mM Sn; 250 ppm/13 mM F), and deionized water (DIW) as a negative control. An acquired pellicle was formed on dentin samples by incubation in clarified, pooled, stimulated human saliva for 24 hours. The specimens were subjected to 5 daily cycles, each consisting of 5 of min demineralization (0.3%/15.6 mM citric acid, pH 2.6, 6'/day) and 60 min of re-mineralization in clarified human saliva. Thirty minutes after the 1st, 3rd and 5th demineralization episodes of each day, the specimens were treated with one of the test solutions for 2 min. Surface loss was measured via optical profilometry. Mixed-model ANOVA followed by Tukey's test were used for the statistical analysis. Sn, F, and their combination significantly reduced the dentin surface loss by 23%, 36%, and 60% compared with DIW, respectively. All groups were significantly different (p < 0.05). The combination of Sn and F significantly reduced the amount of dentin surface loss compared with all other groups. The F group also significantly reduced surface loss compared with Sn and DIW, followed by the Sn group, which showed significantly greater protection compared with the DIW control. The daily use of a combined fluoride and stannous solution is promising for preventing dentin erosion.

The future of fluorides and other protective agents in erosion prevention.

The effectiveness of fluoride in caries prevention has been convincingly proven. In recent years, researchers have investigated the preventive effects of different fluoride formulations on erosive tooth wear with positive results, but their action on caries and erosion prevention must be based on different requirements, because there is no sheltered area in the erosive process as there is in the subsurface carious lesions. Thus, any protective mechanism from fluoride concerning erosion is limited to the surface or the near surface layer of enamel. However, reports on other protective agents show superior preventive results. The mechanism of action of tin-containing products is related to tin deposition onto the tooth surface, as well as the incorporation of tin into the near-surface layer of enamel. These tin-rich deposits are less susceptible to dissolution and may result in enhanced protection of the underlying tooth. Titanium tetrafluoride forms a protective layer on the tooth surface. It is believed that this layer is made up of hydrated hydrogen titanium phosphate. Products containing phosphates and/or proteins may adsorb either to the pellicle, rendering it more protective against demineralization, or directly to the dental hard tissue, probably competing with H(+) at specific sites on the tooth surface. Other substances may further enhance precipitation of calcium phosphates on the enamel surface, protecting it from additional acid impacts. Hence, the future of fluoride alone in erosion prevention looks grim, but the combination of fluoride with protective agents, such as polyvalent metal ions and some polymers, has much brighter prospects.

Efficacy of stannous, fluoride and their their combination in dentin erosion prevention in vitro

The aim of this study was to compare the protective effects of solutions containing stannous (Sn), fluoride (F) and their combination in the prevention of dentin erosion. Forty bovine root dentin specimens (4’4’2 mm3) were prepared and randomly assigned to 4 groups (n = 10): SnCl2(800 ppm/6.7 mM Sn), NaF (250 ppm/13 mM F), NaF/SnCl2 (800 ppm/6.7 mM Sn; 250 ppm/13 mM F), and deionized water (DIW) as a negative control. An acquired pellicle was formed on dentin samples by incubation in clarified, pooled, stimulated human saliva for 24 hours. The specimens were subjected to 5 daily cycles, each consisting of 5 of min demineralization (0.3%/15.6 mM citric acid, pH 2.6, 6’/day) and 60 min of re-mineralization in clarified human saliva. Thirty minutes after the 1st, 3rd and 5th demineralization episodes of each day, the specimens were treated with one of the test solutions for 2 min. Surface loss was measured via optical profilometry. Mixed-model ANOVA followed by Tukey’s test were used for the statistical analysis. Sn, F, and their combination significantly reduced the dentin surface loss by 23%, 36%, and 60% compared with DIW, respectively. All groups were significantly different (p < 0.05). The combination of Sn and F significantly reduced the amount of dentin surface loss compared with all other groups. The F group also significantly reduced surface loss compared with Sn and DIW, followed by the Sn group, which showed significantly greater protection compared with the DIW control. The daily use of a combined fluoride and stannous solution is promising for preventing dentin erosion.