Butterfly Vertebra: A Retrospective Study of 30 Patients.

BACKGROUND: Butterfly vertebra (BV) is a rare congenital spinal anomaly for which there is a paucity of large-scale retrospective studies and established guidelines for treatment. The objective of this study was to elucidate the clinical characteristics, imaging findings, and therapeutic approaches for BV. METHODS: We conducted a retrospective analysis of 30 patients diagnosed with BV at our hospital from 2009 to 2023, examining clinical data, imaging findings, and clinical interventions. RESULTS: The analysis comprised a cohort of 30 patients, consisting of 15 males and 15 females, with a mean age of 27.63 ± 19.84 years. Imaging studies indicated that the majority of vertebral bodies affected by BV were single-segmented (63.3%, 19/30) and less commonly multi-segmented (36.7%, 11/30). These findings frequently coexisted with other medical conditions, most notably spinal scoliosis (76.7%, 23/30). Furthermore, the study identified a range of spinal abnormalities among patients, including hemivertebral deformity (30.0%, 9/30), spinal cleft (10.0%, 3/30), lumbar disc protrusion or herniation (10.0%, 3/30), vertebral slippage (10.0%, 3/30), thoracic kyphosis deformity (6.67%, 2/30), vertebral fusion deformity (6.67%, 2/30), compressive fractures (3.3%, 1/30), and vertebral developmental anomalies (3.3%, 1/30). Clinical intervention resulted in symptom relief for 23 nonsurgical patients through lifestyle modifications, analgesic use, and physical therapy. Seven surgical patients underwent appropriate surgical procedures, leading to satisfaction and adherence to regular postoperative follow-up appointments. CONCLUSIONS: BV is a rare vertebral anomaly that can be easily misdiagnosed due to its similarity to other diseases. Consequently, it is imperative to enhance vigilance in the differential diagnosis process in order to promptly recognize BV. Furthermore, in cases where patients present with additional associated radiographic findings, a thorough evaluation is typically warranted and timely measures should be taken for treatment.

Vertebral body tethering for Lenke 1A curves: the lumbar modifier predicts less optimal outcomes.

INTRODUCTION: The addition of the L4 "AR" and "AL" lumbar modifier for Lenke 1A idiopathic scoliosis (IS) has been shown to direct treatment in posterior spinal fusion; however, its utility in vertebral body tethering (VBT) has yet to be evaluated. METHODS: A review of a prospective, multicenter database for VBT in IS was performed for patients with Lenke 1A deformities and a minimum of 2 years follow-up. Patients were categorized by their lumbar modifier (AR vs AL). Less optimal VBT outcome (LOVO) was defined as a final coronal curve > 35°, lumbar adding-on, or revision surgery for deformity progression or adding-on. RESULTS: Ninety-nine patients met inclusion criteria (81% female, mean 12.6 years), with 55.6% being AL curves. Overall, there were 23 instances of tether breakage (23.3%) and 20 instances of LOVO (20.2%). There was a higher rate of LOVO in AR curves (31.8% vs 10.9%, P = 0.01). Patients with LOVO had greater preoperative deformity, greater apical translation, larger coronal deformity on first erect radiographs, and less coronal deformity correction. Failure to correct the deformity < 30° on first erect was associated with LOVO, as was LIV selection short of the last touch vertebra (TV). Independent risk factors for LOVO included AR curves (OR 3.4; P = 0.04) and first erect curve magnitudes > 30 degrees (OR 6.0; P = 0.002). DISCUSSION: There is a 20.2% rate of less optimal VBT following VBT for Lenke 1A curves. AR curves are independently predictive of less optimal outcomes following VBT and require close attention to LIV selection. Surgeons should consider achieving an initial coronal correction < 30 degrees and extending the LIV to at least the TV to minimize the risk of LOVO.

Vertebral body tethering for adolescent idiopathic scoliosis: a review.

PURPOSE: Adolescent Idiopathic Scoliosis (AIS) remains the most common type of pediatric scoliosis, mostly affecting children between ages 10 and 18. Vertebral body tethering (VBT) offers a non-fusion alternative to the gold standard spinal fusion that permits flexibility and some growth within instrumented segments. This article will serve as a comprehensive literature review of the current state-of-the-art of VBT in relation to radiographic and clinical outcomes, complications, and the learning curve associated with the procedure. METHODS: A systematic literature review was conducted on PubMed, Scopus, and Web of Science from April 2002 to December 2022. Studies were included if they discussed VBT and consisted of clinical studies in which a minimum 2-years follow-up was reported, and series that included anesthetic considerations, learning curve, and early operative morbidity. RESULTS: Forty-nine studies spanning the period from April 2002 to December 2022 were reviewed. CONCLUSION: This article illustrates the potential benefits and challenges of the surgical treatment of AIS with VBT and can serve as a basis for the further study and refinement of this technique ideally as a living document that will be updated regularly.

Double major curvature treated with vertebral body tethering of both curves: how do outcomes compare to posterior spinal fusion?

PURPOSE: Vertebral body tethering (VBT) is a non-fusion alternative to posterior spinal fusion (PSF). There have been few reports on VBT of two curvatures. We aim to compare the radiographic outcomes between VBT and PSF in patients with double curvatures in which both curves were instrumented. METHODS: 29 AIS patients matched by Lenke, age (± 2 years), triradiate cartilage closure status, major Cobb angle (± 8°), and T5-T12 kyphosis (± 10°). Variables were compared using Wilcoxon rank-sum tests, Student's t tests, and chi-Square. Clinical success was defined as major curve < 35°. RESULTS: Group baseline demographics were similar. Major thoracic (T) curve types had significantly better major (VBT 51.5 ± 7.9° to 31.6 ± 12.0° [40%] vs. PSF 54.3 ± 7.4° to 17.4 ± 6.5° [68%]; p = 0.0002) and secondary curve correction in the PSF group. 71% of major T VBT patients were clinically successful versus 100% of PSF. Major thoracolumbar (TL) curve types experienced comparable major (VBT 52.3 ± 7.0° to 18.3 ± 11.4° (65%) vs. PSF 53.0 ± 5.2° to 23.8 ± 10.9° (56%); p = 0.2397) and secondary curve correction. 92% of major TL VBT patients were clinically successful versus 75% in the PSF group. There was no difference in T5-12 kyphosis or lumbar lordosis between groups for any curve type. There were 4 patients (13.8%) with major complications in the VBT group compared to 0 (0%) in the PSF. CONCLUSION: Patients with double major AIS who underwent VBT with major T curve types had less correction than PSF; however, those with major TL curves experienced similar radiographic outcomes regardless of procedure. Complications were greater for VBT.

A deep learning algorithm for automated measurement of vertebral body compression from X-ray images.

The vertebral compression is a significant factor for determining the prognosis of osteoporotic vertebral compression fractures and is generally measured manually by specialists. The consequent misdiagnosis or delayed diagnosis can be fatal for patients. In this study, we trained and evaluated the performance of a vertebral body segmentation model and a vertebral compression measurement model based on convolutional neural networks. For vertebral body segmentation, we used a recurrent residual U-Net model, with an average sensitivity of 0.934 (± 0.086), an average specificity of 0.997 (± 0.002), an average accuracy of 0.987 (± 0.005), and an average dice similarity coefficient of 0.923 (± 0.073). We then generated 1134 data points on the images of three vertebral bodies by labeling each segment of the segmented vertebral body. These were used in the vertebral compression measurement model based on linear regression and multi-scale residual dilated blocks. The model yielded an average mean absolute error of 2.637 (± 1.872) (%), an average mean square error of 13.985 (± 24.107) (%), and an average root mean square error of 3.739 (± 2.187) (%) in fractured vertebral body data. The proposed algorithm has significant potential for aiding the diagnosis of vertebral compression fractures.

Sagittal wedging of intervertebral discs and vertebral bodies in the cervical spine and their associations with age, sex and cervical lordosis: A large-scale morphological study.

Many recent studies have focused on the functional and clinical importance of cervical lordosis. However, there is little accurate knowledge of the anatomical parameters that constitute cervical lordosis (i.e., the sagittal wedging angles of intervertebral discs and vertebral bodies) and their associations with age and sex. Standing lateral cervical radiographs of 1020 subjects (424 males, 596 females) with a mean age of 36.6 ± 17.0 years (range 7-95 years) were evaluated retrospectively. Cervical lordosis, the sum of intervertebral disc wedging angles from C2/C3 to C6/C7 and the sum of vertebral body wedging angles from C3 to C7 were measured. The sum of intervertebral disc wedging and the sum of vertebral body wedging were 20.6° ± 14.7° and -12.8° ± 10.3°, respectively. The sum of intervertebral disc wedging increased significantly with age and was significantly greater in males than females, whereas there was no sex-related difference in the sum of vertebral body wedging. The sum of intervertebral disc wedging was negatively correlated with sum of vertebral body wedging. Wedging of discs contributed to C2-C7 cervical lordosis more significantly than wedging of vertebral bodies. There were moderate positive correlations between cervical lordosis and intervertebral disc wedging angles at C3/C4, C4/C5 and C5/C6; weak correlations were observed at C2/C3 and C6/C7. This study constitutes the largest currently available analysis comprehensively documenting the anatomical characteristics of sagittal wedging of intervertebral discs and vertebral bodies in the cervical spine. The findings could improve understanding of the internal architecture of cervical lordosis among clinicians.

The new imaging findings: "Passing spine" without kissing.

ABSTRACT: Case-control studies by examining the lumbar spine computed tomography (CT) findings focusing on the spinous processes."Passing spine" was defined as a lumbar degenerative change observed on CT images. In contrast, kissing spine, which is also an image finding, has been acknowledged as an established clinical condition. Therefore, we compared the passing spine group and the kissing spine group to investigate whether the 2 groups belong to a similar disease group; this would help explain the clinical and imaging characteristics of patients with passing spine.Previous studies have described the gradual increase in the height and thickness of the lumbar vertebral spinous processes that can occur in individuals aged >40 years, and reported that this progressive degeneration can lead to a condition termed "kissing spine."We examined the CT imaging of 373 patients with lumbar spinal disease and divided patients into 2 groups, the kissing spine (K) group and the passing spine (P) group, and compared the clinical (age, sex, presence/absence of lower extremity pain) and imaging data (localization of kissing or passing spine, intervertebral disc height at the level of kissing or passing spine, lumbar lordosis (LL) angle, presence/absence of vacuum phenomenon (VP) in the intervertebral discs and spondylolisthesis at the level of kissing or passing spine between the 2 groups.Compared with patients with kissing spine, patients with passing spine had an increased incidence of lower extremity pain, lower intervertebral disc height at the level of passing spine, relatively static LL, and VP commonly observed in the intervertebral discs at the level of passing spine.Because the clinical and imaging characteristics of patients with passing spine are different from those of patients with kissing spine, passing spine might be a pathological condition distinct from kissing spine.

Correlation of Bone Density Values of Quantitative Computed Tomography and Hounsfield Units Measured in Native Computed Tomography in 902 Vertebral Bodies.

OBJECTIVE: Due to the increasing age of patients, the evaluation of bone density is crucial, especially in preparation for spinal surgery. The aim of this study was to determine bone density using a computed tomography (CT) and to correlate Hounsfield units (HU) with bone density values of a quantitative computed tomography (QCT). METHODS: The study is a monocentric, retrospective data analysis. We examined 902 vertebral bodies from a total of 369 patients who received a CT of the thoracolumbar spine in the period from 2015 to 2019 and compared the HU with values of a QCT. A general equation for calculation the QCT values was established. RESULTS: We found a significant correlation between the Hounsfield units and the corresponding QCT-values (r = 0.944, P < 0.001). We also demonstrated that the calculated QCT values are independent of patient sex (P < 0.942). Furthermore, we could not demonstrate differences in the correlation of the 3 measured levels (axial, sagittal, and coronary) to the QCT values. The QCT-values can be calculated on the basis of a native CT of the lumbar spine using the equation: QCT = 17.8 + 0.7 × HU. CONCLUSIONS: The equation allows calculating bone density values without the need for an additional QCT and without further radiation exposure or costs. With this measuring method it is possible to obtain additional information from a computed tomography.

Biologic Agents Preserve the C-2 Pedicle in Patients with Rheumatoid Arthritis: A Comparative Imaging Study Using Three-Dimensional Computed Tomography.

OBJECTIVE: To investigate whether biologic agents (BAs) reduce a narrow C-2 pedicle screw trajectory, which is often a key stabilizer in surgical treatment, in patients with rheumatoid arthritis (RA). METHODS: A total of 100 patients with RA treated with and without BAs (BA [+] group [n = 50] and BA [-] group [n = 50]), respectively, were included in the present study. Computed tomography (CT) images of their cervical spine, including C-2, were analyzed. The maximum screw diameter at C-2 that could be inserted without breaching the cortex, measured on 3-dimensional images using a CT-based navigation system, was compared between the groups with and without BA administration. Furthermore, the destruction of the atlantoaxial joint was examined using CT images. The risk factors for a narrow C-2 pedicle were elucidated among the patients treated with BAs. RESULTS: The pedicle in the BA (+) group had a significantly larger C-2 maximum screw diameter than the BA (-) group (6.00 mm vs. 5.13 mm, P < 0.001), with less destruction of the atlantoaxial joint. Among the BA (+) group, a longer period until the initial administration of BAs and RA disease duration were associated with a narrow C-2 pedicle. CONCLUSIONS: This study suggests that BAs can maintain the trajectory for C-2 pedicle screws, which acts as a key stabilizer in surgical management for the rheumatoid cervical spine, by halting the destruction of the atlantoaxial joint. Early introduction of BAs can be especially important to prevent the narrowing of the C-2 pedicle.

Basivertebral foramina of true vertebrae: morphometry, topography and clinical considerations.

PURPOSE: Basivertebral foramina (BVF) are openings of the posterior wall of vertebral body (VB) that lead to basivertebral canals (BVC), where homonymous neurovascular bundle courses. BVF and BVC are implicated with spinal fractures, vertebral augmentation and basivertebral nerve radiofrequency ablation. Despite their essential clinical impact, knowledge of BVF precise anatomy is scarce. The current study describes in detail the BVF typical morphological and topographical anatomy, morphometry and variants. METHODS: In total, 1561 dried true vertebrae of 70 Greek spines of known gender and age were examined. BVF number, location, shape and size (in foramina > 1 mm), BVF distance from VB rims and pedicles, as well as VB morphometry (diameters, heights and distance between pedicles) were studied. Ten spines were re-examined by computed tomography and BVC depth and shape were recorded. Correlations and differences were statistically analyzed. RESULTS: C1 lack BVF (3.4%). One BVF was found in 45.1%, two in 36.9%, three in 3.8% and four BVF in 0.6%. Multiple small (< 1 mm) foramina were observed in 10.1%. Asymmetry was detected in 12.3%. C2 and T10-L1 presented typical pattern, whereas C3 and T2 had the greatest variability. BVF were significantly closer to the upper rim in C2 and T10-L4 and to the lower rim in C7-T4, T6-T8 and L5. The mean BVC depth was 12-21.8% of the VB anteroposterior diameter. CONCLUSION: BVF number, shape, size and topography are described, in detail, per vertebral level. The provided morphological classification and the created cumulative BVF topographic graphs should assist in clinical practice and surgery.

20 Tips to Avoid and Handle Problems in the Placement of Percutaneous Pedicle Screws.

BACKGROUND: Two-dimensional fluoroscopy-guided percutaneous pedicle screw placement is currently the most widely applied instrumentation for minimally invasive treatment of spinal injuries requiring stabilization. Although this technique has advantages over open instrumentation, it also presents new challenges and specific complications. The objective of this study was to provide recommendations developed from the experience of several spinal surgeons at different minimally invasive spine surgery reference centers to solve specific problems and prevent complications during the learning curve of this technique. METHODS: An AO Spine Latin America minimally invasive spine surgery study group analyzed the most frequent complications and challenges occurring during the placement of >14,000 two-dimensional fluoroscopy-guided percutaneous pedicle screws at different centers over 15 years. Twenty tips considered most relevant to performing this technique, excluding problems directly related to specific brands of instruments, were presented. RESULTS: The 20 tips included the following: (1) positioning; (2) clean and painless; (3) fewer x-rays; (4) check the clock; (5) beveled tip; (6) transverse-rib-pedicle; (7) double Jamshidi; (8) hammer the Kirschner wire; (9) bent tip; (10) too loose, too tight; (11) new trajectory; (12) manual control; (13) start over; (14) Kirschner wire first; (15) adhesive drape control; (16) bend the rod; (17) lower rods; (18) freehand inner; (19) posterior fusion; (20) revision. CONCLUSIONS: Implementation of these tips might improve performance of this technique and reduce the complications related to percutaneous pedicle screw placement.

C2 Pedicle Sclerosis Grading, More Than Diameter, Predicts Surgeons' Preoperative Assessment of Safe Screw Placement: A Novel Classification System.

BACKGROUND: The preoperative assessment of C2 morphology is important for safe instrumentation. Sclerotic changes are often seen in C2 pedicles. Evaluating the diameter measurements solely might not accurately assess the safety of screw insertion. We have proposed a novel grading system of the C2 pedicle that includes sclerosis and evaluated the predictive value of this grading system with the surgeon's safety evaluation. METHODS: We reviewed and measured the dimensional values in 220 cervical computed tomography angiograms. Additionally, we used a grading system that divides the findings into 5 grades according to the width measurement and degree of sclerosis in the C2 pedicle. Two spine surgeons independently classified the pedicles as follows: safe (minimal risk of pedicle violation), caution needed (caution to minimize pedicle violation), or dangerous (a high risk of pedicle violation). Finally, we compared the measurements and the surgeons' safety assessments. RESULTS: A total of 411 pedicles of 203 patients (mean age, 69.5 years; 49.5% women) were included. Of the 411 C2 pedicles, 170 were classified as high risk by ≥1 surgeon. Between the dimensional measurements and grading system, the sclerotic grade showed the best predictive value. CONCLUSIONS: We have introduced a novel tool to evaluate the safety of C2 pedicle screw placement. Our results suggest that our pedicle width-sclerosis grading system is reproducible and predicts the surgeon's assessment of safe screw placement better than C2 pedicle diametrical measurements alone.

Three-dimensional distribution of CT attenuation in the lumbar spine pedicle wall.

This study investigated in vivo the three-dimensional distribution of CT attenuation in the lumbar spine pedicle wall measured in Hounsfield Unit (HU). Seventy-five volunteers underwent clinical lumbar spine CT scans. Data was analyzed with custom-written software to determine the regional variation in pedicle wall attenuation values. A cylindrical coordinate system oriented along the pedicle's long axis was used to calculate the pedicular wall attenuation distribution three-dimensionally and the highest attenuation value was identified. The pedicular cross-section was divided into four quadrants: lateral, medial, cranial, and caudal. The mean HU value for each quadrant was calculated for all lumbar spine levels (L1-5). The pedicle wall attenuation was analyzed by gender, age, spinal levels and anatomical quadrant. The mean HU values of the pedicle wall at L1 and L5 were significantly lower than the values between L2-4 in both genders and in both age groups. Furthermore, the medial quadrant showed higher HU values than the lateral quadrant at all levels and the caudal quadrant showed higher HU values at L1-3 and lower HU values at L4-5 than the cranial quadrant. These findings may explain why there is a higher incidence of pedicle screw breach in the pedicle lateral wall.

Using inverse finite element analysis to identify spinal tissue behaviour in situ.

In computational modelling of musculoskeletal applications, one of the critical aspects is ensuring that a model can capture intrinsic population variability and not only representative of a "mean" individual. Developing and calibrating models with this aspect in mind is key for the credibility of a modelling methodology. This often requires calibration of complex models with respect to 3D experiments and measurements on a range of specimens or patients. Most Finite Element (FE) software's do not have such a capacity embedded in their core tools. This paper presents a versatile interface between Finite Element (FE) software and optimisation tools, enabling calibration of a group of FE models on a range of experimental data. It is provided as a Python toolbox which has been fully tested and verified on Windows platforms. The toolbox is tested in three case studies involving in vitro testing of spinal tissues.

Efficacy of a Novel Vertebral Body Augmentation System in the Treatment of Patients with Symptomatic Vertebral Body Fractures.

PURPOSE: To evaluate the safety and efficacy of a novel augmentation implant in the treatment of patients with symptomatic vertebral body fractures. MATERIALS AND METHODS: Thirty consecutive patients (seven males and 23 females), mean age of 70 years (range 56 to 89) with osteoporotic fractures and/or low-energy trauma fractures (osteoporosis confirmed by CT), were enrolled in an IRB-approved prospective study. The type of fracture was classified according to the Magerl classification. The patients were treated with the Tektona® dedicated vertebral body augmentation system. Visual analogue scale (VAS) and Oswestry Disability Index (ODI) scores were obtained after 1, 6 and 12 months. Quality of life was assessed with the SF36 score. RESULTS: A total of 37 vertebral bodies, mostly from T6 to L5, were treated in the 30 enrolled patients. In 67.6% of the cases (n = 25), lumbar fractures were treated. Most of the fractures (43%; n = 16) were A1.1 according to the Magerl classification. A significant pain reduction evaluated by VAS scores (p < 0.0001) was observed on average 7.6 (before the procedure) to 2.8 (immediately post-treatment), 2.1 and 2.7 (after 6 and 12 months later, respectively). The mean ODI score was 55.5% before treatment, and this was statistically significant reduced to 22.3% and 26.9%, respectively, at 6 and 12 months after treatment (p < 0.0001). The SF36 scores, both physical and mental components, showed statistically significant variations (p < 0.0001) whose direction was subpopulation dependent. CONCLUSION: Patients with confirmed osteoporosis, suffering from symptomatic vertebral body fractures (osteoporotic and/or low-energy traumatic), were treated safely and effectively using this novel implant.

Multi-level sagittally cleft vertebrae: a case report and review of the literature.

The term "sagittal cleft vertebra" (SCV) denotes a rare embryologically derived longitudinal defect within the vertebral body, which is clinically and radiologically challenging to diagnose in isolation. This defect results in two hemivertebrae, which ossify discordantly, ultimately leading to a sagittal cleft through the vertebral body. Often presenting with low back pain or concomitant with an associated syndromic illness, SCV is often found incidentally and can mimic vertebral compression fractures radiographically. Treatment of SCV has largely been conservative and symptomatic. With only 109 reported cases in the current literature, we present a unique case of multiple SCV throughout the thoracolumbar region in an adolescent patient. We performed a review of the literature to identify published cases of SCV to date. We searched PUBMED using the terms "sagittal cleft vertebrae", "butterfly vertebrae", and "anterior rachischisis". Abstracts were screened for reports specifically involving original cases of SCV. Given the well-established association with syndromic illnesses, finding an SCV warrants further investigation for other abnormalities of the musculoskeletal, cardiac, and genitourinary systems. Complex management strategies are rare unless the SCV is associated with an aberrant syndrome, disc herniation or severe musculoskeletal abnormality, or symptomatic disc herniation requiring surgical management. Further studies should focus on uncovering the genetic markers leading to the cleft vertebral bodies, with a focus on early screening and monitoring of patients who could be predisposed to the condition.

Association of Pedicle Sign Type with Clinical and Radiological Features in Patients with Symptomatic Spinal Metastases.

BACKGROUND: Because of population aging in Japan, the number of cancer diagnoses is increasing rapidly. The pedicle sign is a valuable radiographic indicator of metastases, as the pedicle is the most commonly affected vertebral structure in radiographic assessment. However, few studies have carefully examined the morphological features of pedicle signs. To improve the capacity of medical professionals to diagnose symptomatic spinal metastases, we retrospectively examined the morphological characteristics of pedicle signs and their associations with clinical and radiological features. METHODS: 186 patients with symptomatic spinal metastases who visited our department during the period from January 1, 2011 through December 31, 2017 were enrolled. The pedicle sign was defined as a missing or obscured pedicle on an anteroposterior radiograph. Radiographs were evaluated for pedicles and other vertebrae structures. Clinical and other radiological features were compared in relation to the type of pedicle sign identified. RESULTS: Pedicle signs were classified as completely disappeared (complete, 26 patients), partially disappeared (partial, 40 patients), or obscured by the osteoblastic background (blastic, 28 patients). Disappearance of both the bone cortex and pedicle was observed in almost half of the patients with complete or partial pedicle signs. The complete pedicle sign was associated with significantly longer survival. CONCLUSION: Diagnosis of bone metastases requires understanding of pedicle sign types.

Treatment of Lumbosacral Tuberculosis with Significant Vertebral Body Loss Using Single-Stage Posterior Surgical Management with a Structural Autograft Combined with a Titanium Mesh Cage.

OBJECTIVE: Treatment of lumbosacral tuberculosis is still controversial. In our study, we assessed the efficacy and feasibility of single-stage posterior debridement, interbody fusion using a structural autograft combined with a titanium mesh cage, and posterior instrumentation for the treatment of lumbosacral tuberculosis with significant vertebral body loss. METHODS: From May 2011 to June 2018, 15 patients with lumbosacral tuberculosis with significant vertebral body loss had undergone single-stage posterior debridement, interbody fusion using a structural autograft combined with a titanium mesh cage, and posterior instrumentation. The pre- and postoperative lumbosacral angle, visual analog scale score, erythrocyte sedimentation rate, C-reactive protein, and neurological status were assessed. RESULTS: Surgery was successful for all patients, and no patient experienced tuberculosis recurrence during an average follow-up period of 27.3 months (range, 12-60 months). After surgery, the erythrocyte sedimentation rate and C-reactive protein for all patients had returned to normal within 3 months. At the final follow-up examination, the neurological status had improved in all patients who had had neurological deficits preoperatively. The mean preoperative lumbosacral angle was 12.6° (range, 6.7°-17.9°), and had increased to 27.7° (range, 24.3°-34.6°) after surgery. The average lumbosacral angle was 26.4° (range, 22.1°-32.3°), with an average loss of 1.4° (range, 0.6°-2.3°) at the final follow-up visit. CONCLUSIONS: The combination of single-stage posterior debridement, interbody fusion using structural autografts with a titanium mesh cage, and posterior instrumentation is an effective and safe option for the treatment of lumbosacral tuberculosis with significant vertebral body loss.

Unexpected Vertebral Bodies Trapping of 99mTc-Macroaggregated Albumin During Lung Perfusion Scintigraphy in a Patient With Collateral Paravertebral Venous System.

ABSTRACT: A 35-year-old woman was referred to our nuclear medicine center for a ventilation and perfusion (VQ) pulmonary scintigraphy to detect pulmonary embolism. She was treated with low-molecular-weight heparin following a proximal venous thrombosis of the right upper limb and had a previous history of an infiltrating ductal carcinoma of the right breast. Surprisingly, the VQ scintigraphy showed uptake of 99mTc-MAA in several superior vertebrae. A contrast-enhanced CT scan revealed a dilated collateral paravertebral venous system due to the deep vein thrombosis extended from superior vena cava to brachiocephalic trunk. 99mTc-MAA was trapped through the dilated vertebral venous system.