Effect of fluoride or chitosan toothpaste and at-home bleaching in enamel roughness, tooth color, and staining susceptibility.

PURPOSE: To evaluate how fluoride- or chitosan-based toothpaste used during at-home bleaching affects enamel roughness, tooth color, and staining susceptibility. METHODS: Bovine enamel blocks were submitted to a 14-day cycling regime considering a factorial design (bleaching agent x toothpaste, 2 x 3), with n=10: (1) bleaching with 16% carbamide peroxide (CP) or 6% hydrogen peroxide (HP), and (2) daily exposure of a fluoride (1,450 ppm F-NaF) toothpaste (FT), chitosan-based toothpaste (CBT), or distilled water (control). Then, 24 hours after the last day of bleaching procedure the samples were exposed to a coffee solution. Color (ΔEab, ΔE00, L*, a*, b*) and roughness (Ra, µm) analyses were performed to compare the samples initially (baseline), after bleaching, and after coffee staining. The results were evaluated by linear models for repeated measures (L*, a*, b*, and Ra), 2-way ANOVA (ΔEab, ΔE00) and Tukey's test (α= 0.05). RESULTS: After the at-home bleaching procedure (toothpaste vs. time, P< 0.0001), the toothpaste groups presented a statistically lower Ra than the control (CBT 0.05). After coffee exposure, CBT presented lower ΔEab and ΔE00 values in the HP groups (toothpaste, P< 0.0001), and lower b* and a* values in the CP groups (toothpaste vs. time, P= 0.004). CLINICAL SIGNIFICANCE: Fluoride or chitosan delivered by toothpaste can reduce surface alterations of the enamel during at-home bleaching, without affecting bleaching efficacy.

Therapeutic solutions for discoloration of calcified teeth based on CBCT diagnosis.

Single tooth orange discoloration secondary to root canal calcification occurs as a consequence of dental trauma, orthodontic treatment, or for unknown rea- sons. A correct case history must be compiled and a CBCT study carried out in order to establish the diag- nosis and define the best treatment plan in each case. The aim of the present study was to offer a therapeutic protocol involving a clinical decision-making tree dia- gram based on the presence or absence of apical dis- ease and the degree of canal calcification. Dental bleaching and the use of ceramic veneers allow es- thetic restoration in such cases.

Bleaching versus color change resistant adhesive in the discoloration of bracket-bonded tooth surfaces: an in vitro study.

OBJECTIVES: The aim of this study was to compare the effect of office bleaching of teeth bonded with Transbond XTTM (3M Unitek, Monrovia, CA, USA) (TRXT) and the use of color change resistant Orthocem (FGM, Joinville, Brazil) in bracket bonding on coffee-induced enamel discoloration. MATERIALS AND METHODS: Eighty premolars were distributed in equal numbers (n = 20) to group 1 (TRXT + distilled water), group 2 (TRXT + coffee solution), group 3 (TRXT + coffee solution + bleaching), and group 4 (Orthocem + coffee solution). Color was measured using a SpectroShade Micro (MHT, International, Verona, Italy) device at the beginning (T0), after coloring (T1), after bleaching (T1B), and after debonding (T2). ΔE color change values were calculated as T1-T0, T1B-T0 and T2-T0 differences. The conformity of the data to the normal distribution was examined with the Shapiro-Wilk test. Multiple comparisons were made with Tamhane's T2 test and Tukey's HSD test using one-way analysis of variance in the comparison of normally distributed data, and multiple comparisons were made with Dunn's test using the Kruskal-Wallis H test for comparison of non-normally distributed data. The significance level was set at p < 0.050. RESULTS: A statistically significant (p < 0.001) difference was found between the T1-T0 and T2-T0 stages for group 1-4 ΔE values. A statistically significant (p < 0.001) difference was also found when the T1B-T0 ΔE values of group 3 were compared with the T1-T0 ΔE values of groups 1, 2, and 4. CONCLUSIONS: After coffee-induced enamel discoloration, bleaching of teeth bonded with TRXT produced acceptable color difference of the incisal, middle, and gingival regions of the crown. In teeth bonded with Orthocem, acceptable color difference was seen only in the middle of the crown. CLINICAL RELEVANCE: The presented study will guide the clinician on how enamel discoloration side effect of fixed orthodontic appliance can reduce.

Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study.

AIM: The aim of the present study was to assess the stain removal ability and color stability of three distinct dentifrices on artificially stained enamel surface. MATERIALS AND METHODS: This study included 75 intact, healthy premolars free of dental caries that were extracted during orthodontic therapy. The samples were allowed to dry for 6 hours after being submerged in the prepared tea solution for roughly 18 hours every day. Then this procedure was repeated for seven successive days. All samples were randomly divided into three experimental groups with 25 samples in each group. Group I: control dentifrice, group II: dentifrice containing hydrogen peroxide, group III: dentifrice containing papain and bromelain. A specially designed toothbrushing simulator was used to brush every sample in the relevant group. Using a spectrophotometer and a measurement program, color measurement was evaluated after staining process after 4 weeks and 8 weeks of teeth cleaning. Using a profilometer, the surface roughness values (Ra) were assessed. RESULTS: After 8 weeks of brushing of stained samples, the color stability was better in dentifrice containing hydrogen peroxide (1.14 ± 0.11) followed by dentifrice containing papain and bromelain (1.22 ± 0.08) and control group (1.30 ± 0.09). And after 8 weeks of brushing of stained samples, the surface roughness was more in dentifrice containing hydrogen peroxide (0.237 ± 0.02) followed by dentifrice containing papain and bromelain (0.229 ± 0.13) and control group (0.207 ± 0.05). CONCLUSION: The present study concluded that the dentifrice containing hydrogen peroxide showed a superior whitening effect on the stained enamel surface than dentifrice containing papain and bromelain and control dentifrice. CLINICAL SIGNIFICANCE: The development of various dentifrice products has been greatly aided by the increased demand for an improved esthetic appearance. Teeth's natural color and any external stains that could accumulate on the tooth surface combine to determine a tooth's color. Additionally, the use of whitening dental pastes to remove external stains has grown in favor. With the development of these whitening toothpastes, dentifrices' ability to lessen or eliminate extrinsic dental stains has increased. How to cite this article: Mishra D, Kamath DG, Alagla M, et al. Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study. J Contemp Dent Pract 2024;25(1):68-71.

Evaluation of pediatric dentists' knowledge and approaches to tooth discoloration.

In recent years, esthetic expectations have come to the fore in pediatric dentistry, as in every field of dentistry. Therefore, to better meet patients' expectations, the steps taken to determine and improve the current level of knowledge of pediatric dentists on tooth discoloration gain importance. This study aims to measure the knowledge levels of pediatric dentists regarding tooth discoloration. A 33-questioned survey created online was emailed to pediatric dentists between March and December 2021. The first part included four multiple-choice and two open-ended questions regarding demographic characteristics. The second part was to measure the participants' knowledge of tooth discoloration. The last part was to evaluate the clinical approaches of the participants. Participants who agreed to answer all of the questions were included in the study (n = 129). The knowledge levels of the participants were scored according to the accuracy of their answers. The data were statistically analyzed using descriptive statistics and chi-square tests. Of the pediatric dentists who participated in this study, 16.3% had high knowledge, 79.8% had medium knowledge, and 3.9% had insufficient understanding of tooth discoloration. There was no correlation between time since dental school graduation and time spent practicing as a pediatric dentist (p > 0.05). The group with the highest average level of knowledge was the group most frequently encountered with tooth discoloration in the clinic (p ≤ 0.05). On average, pediatric dentists had moderate knowledge of tooth discoloration. The group with the highest average expertise in this field was the group that most frequently encountered and treated tooth discoloration. Information on tooth discoloration due to systemic factors was insufficient. To increase the knowledge level of pediatric dentists about the causes and treatments of tooth discoloration, it may be beneficial to establish training programs during and after specialization education.

Coffee-stained tooth enamel color restoration and surface abrasion with whitening and regular toothpaste.

PURPOSE: To evaluate the effectiveness of whitening toothpaste in restoring tooth color after coffee staining and its potential impact on enamel surfaces compared with regular toothpaste. METHODS: Bovine tooth enamel specimens were prepared and stained with coffee solutions before undergoing brushing simulation with different toothpaste slurries (whitening, regular, reference). For precise evaluation, spectrophotometric measurements were taken at intervals to assess color changes using the CIELAB (Commission Internationale de l'Éclairage Lab*) color space. Additionally, profilometric measurements were taken to determine the impact of toothpaste type on the roughness and abraded depth of the enamel surface. To understand the effects of toothpaste and brushing on color change, surface roughness, and abraded depth, while also considering correlations between these factors, the findings were analyzed using mixed-effects models. RESULTS: The whitening toothpaste group demonstrated the highest recovery rate (71%) after 10,000 brushstrokes, followed by the regular toothpaste group (48%) and the reference slurry group (43%). The mixed-effects model analysis revealed that the reference group had a smaller change in lightness (ΔL) than those in the regular toothpaste group. The whitening toothpaste group showed a greater change in lightness on average than those in the regular toothpaste group, with an increase in lightness as the number of brushstrokes increased. According to the roughness and abraded depth data, the whitening toothpaste group was least affected by brushing, while the reference and regular toothpaste groups showed higher levels of roughness and abraded depth at all intervals. CLINICAL SIGNIFICANCE: Gaining a thorough understanding of the effectiveness of whitening toothpaste and its impact on the enamel surface plays a crucial role in refining toothpaste formulations and advancing tooth whitening techniques in dental care.

At-home bleaching versus whitening toothpastes for treatment of tooth discoloration: a cost-effectiveness analysis.

OBJECTIVES: This study aimed to analyze the cost-effectiveness of whitening toothpastes and at-home bleaching for the treatment of tooth discoloration. METHODOLOGY: A cost-effectiveness economic analysis was conducted, and eight randomized clinical trials were selected based on the whitening agent product used: blue covarine dentifrices (BCD), hydrogen peroxide dentifrices (HPD), dentifrices without bleaching agents (CD, negative control), and 10% carbamide peroxide (CP10, positive control) for at-home bleaching. The consumer/patient perspective was adopted, macro-costing techniques were used and a decision tree model was performed considering the costs in the American and Brazilian markets. The color change evaluation (ΔE*ab) was used to calculate the effectiveness of tooth bleaching. A probabilistic analysis was performed using a Monte Carlo simulation and incremental cost-effectiveness ratios were obtained. RESULTS: CP10 resulted in the highest cost-effectiveness compared to the use of dentifrices in both markets. In Brazil, HPD was more cost-effective than BCD and CD. In the US, the increased costs of HPD and BCD did not generate any whitening benefit compared to CD. CONCLUSIONS: CP10 was more cost-effective than BCD and HPD for tooth bleaching from the perspectives of the Brazilian and American markets. Decision-making should consider the use of CP10 for treating tooth discoloration.

Investigating the role of chlorogenic acids and coffee type in coffee-induced teeth discoloration.

OBJECTIVE: Coffee is one of the most popular beverages in the world, with millions of people consuming it every day. The effect of coffee on teeth discoloration has long been a concern for both coffee drinkers and dental professionals. To address this concern, this study aimed to investigate the role of chlorogenic acids (CGAs) and the type of coffee in coffee-induced teeth discoloration. MATERIALS AND METHODS: High-performance liquid chromatography with a photodiode array detector was used to determine the CGA contents of instant coffee produced by five manufacturers (Starbucks, Dunkin' Donuts, Kanu, Ediya, Coffee Bean). A total of 180 bovine tooth specimens were immersed in the coffee samples for varying durations (3, 9, 24, 48, and 72 h), and the discoloration levels were measured using a spectrophotometer. A linear mixed-effects model analysis was used to determine the significance of L*, a*, and b* values in relation to the duration of coffee immersion and coffee type. RESULTS: Both immersion time and coffee type had significant effects on tooth discoloration (p < 0.001), with some types of coffee being more strongly associated with tooth discoloration than others. The amount of CGAs present in coffee was found to be positively correlated with the degree of discoloration (p = 0.030). CONCLUSIONS: Prolonged exposure to coffee can exacerbate teeth staining, and different types of coffee can cause varying degrees of discoloration. Furthermore, coffee with higher levels of CGAs may lead to greater tooth discoloration.

Prevention efficacy of dentin tubule sealing with Nd:YAG laser against tooth discoloration induced by vital pulp treatment.

BACKGROUND: The discoloration potential of dental materials and applications such as vital pulp therapy also cause discoloration due to the presence of blood. Dentin tubule sealing methods could be used for the prevention of discoloration. AIM: The purpose of this study was to evaluate the effect of sealing pulp chamber walls with Nd:YAG laser against discoloration caused by tricalcium silicate-based materials in the presence and absence of blood contamination. DESIGN: Eighty-one extracted human maxillary incisors were prepared and randomly divided into nine groups according to the Nd:YAG laser application, the cement to be used (NeoMTA Plus/Biodentine), and the presence or absence of blood. The color measurements were obtained with a spectrophotometer at baseline and then at the sixth (T1) and 12th (T2) months thereafter. RESULTS: Sealing with Nd:YAG laser and placing NeoMTA Plus or Biodentine on human blood significantly increased discoloration at T1 and T2 (p < .05). Similarly, without sealing the cavity and placing NeoMTA Plus or Biodentine on human blood significantly increased discoloration at T1 and T2 (p < .05). CONCLUSION: Regardless of sealing the dentin tubules with Nd:YAG laser, NeoMTA Plus and Biodentine caused more discoloration in the presence of blood contamination.

Effects of enamel moistening and repositioning guide color on tooth whitening outcomes: A clinical trial.

This clinical trial investigated the effects of pre-application enamel moistening on the impact of a 37% carbamide peroxide whitener on tooth color changes and the influence of repositioning guide colors. Forty participants were randomly assigned to in-office tooth bleaching with either moistened enamel (experimental) or dry enamel (control). The whitener was applied for 45 min over two sessions. Tooth color was visually measured or assessed using a spectrophotometer with purple or green silicone guides. Tooth bleaching was assessed using CIE76 (ΔEab ) and CIEDE2000 (ΔE00 ) formulas and by whitening and bleaching index score changes. Moistening the enamel did not significantly affect tooth color. However, the guide color choice only impacted tooth color when measured instrumentally. At baseline, the green guide resulted in statistically significantly whiter teeth than the purple guide. Less pronounced differences in the b* coordinate between baseline and final measurements were found using the green guide. The green guide also produced lower ΔEab values and less change in indexes. In conclusion, moistening the enamel did not significantly impact tooth color changes. However, the repositioning guide color influenced the tooth bleaching measured instrumentally, except for ΔE00 .

Tooth discoloration induced by endodontic sealers and cervical limit: 1-year in vitro evaluation.

This laboratory study aimed to evaluate the influence of endodontic sealer and cervical limit of root filling on the discoloration of root canal treated teeth. Bovine incisors were randomly distributed into six experimental groups and control (n=21/group), according to the endodontic sealer used [AH Plus (AP); MTA Fillapex (MF) and Sealer Plus BC (SPB)] and the cervical limit of root filling [dental cervix (DC) or 2 mm in apical direction (2mm-AD)]. Tooth discoloration (ΔE) was evaluated by a digital spectrophotometer using the CIED2000 method. Color assessments were performed immediately before (baseline), 1 week, 1, 3, 6 months, and 1 year after obturation. Data were analyzed by ANOVA and Tukey's post-hoc tests (α=5%). Teeth filled with the three sealers showed perceptible tooth discoloration (ΔE≥2.7) in 1 week, maintaining similar values over time. There was a significant difference between MF and SPB sealers in the 2mm-AD groups. In addition, 2mm-AD groups promoted significantly lower discoloration than DC groups for AH (3 months) and SPB (1 and 3 months) sealer,s. Teeth filled with AP, MF, and SPB sealers displayed discoloration from 1 week to one year, with differences between MF and SPB sealers. A cervical limit of filling material at 2 mm from the dental cervix seems more advisable, promoting lower crown discoloration.

Inhibition of Silver Diamine Fluoride-induced Tooth Discoloration by Using Natural Antioxidant: In Vitro Study.

AIM: Silver diamine fluoride (SDF) is a well-known caries preventive aid capable of arresting carious lesions and preventing secondary caries formation. Despite having the caries prevention potential, the clinical use of SDF is limited due to the tooth discoloration caused by SDF. The objective of this study was to evaluate the efficiency of natural antioxidants to inhibit SDF-induced tooth discoloration. MATERIALS AND METHODS: A total of 32 bovine teeth were polished to create a 6 mm circular window on the middle 1/3 (for enamel) or on the cervical 1/3 (for dentin) of the labial surface. Specimens were treated either with SDF alone or SDF followed by ascorbic acid (AA)/alpha lipoic acid (ALA)/7th generation bonding materials. The color parameters Lightness (L*), Chroma (C*), and Hue (H*) of the tooth window were measured at pretreatment, 1-hour, 1-week, and 1-month posttreatment using a digital color chromometer. RESULTS: Repeated measure ANOVA showed a significant tooth color alteration at 1-hour posttreatment. The L* and H* values dropped and C* value elevated significantly in 1-hour posttreatment measurement. All experimental groups showed significant tooth color alteration after treatment (p < 0.05) and were unable to reverse the discoloration even after 1-month period except the ALA group which did not show any significant (p > 0.05) color alteration compared with the pretreatment value. CONCLUSIONS: Within the limitation of the in vitro model and according to the results of this study, it can be concluded that ALA has the potential to prevent SDF-induced tooth discoloration; however, AA was unable to prevent the discoloration. CLINICAL SIGNIFICANCE: SDF induces discoloration of enamel and dentin can be reversed by applying Alpha lipoic acid immediacy after SDF application.

Ex vivo study of molecular changes of stained teeth following hydrogen peroxide and peroxymonosulfate treatments.

White teeth can give confidence and tend to be associated with a healthier lifestyle in modern society. Therefore, tooth-bleaching strategies have been developed, including the use of hydrogen peroxide. Recently, peroxymonosulfate has been introduced as an alternative bleaching method to hydrogen peroxide. Although both chemicals are oxidizing agents, their effects on the molecular composition of the stained teeth are yet unknown. In this study, the molecular profiles of teeth bleached with hydrogen peroxide and peroxymonosulfate were compared using Liquid Chromatography-Tandem Mass Spectrometry. Statistical analyses were used to assess the samples. In addition, reference spectral libraries and in silico tools were used to perform metabolite annotation. Overall, principal component analysis showed a strong separation between control and hydrogen peroxide and peroxymonosulfate samples (p < 0.001). The analysis of molecular changes revealed amino acids and dipeptides in stained teeth samples after hydrogen peroxide and peroxymonosulfate treatments. Noteworthy, the two bleaching methods led to distinct molecular profiles. For example, diterpenoids were more prevalent after peroxymonosulfate treatment, while a greater abundance of alkaloids was detected after hydrogen peroxide treatment. Whereas non-bleached samples (controls) showed mainly lipids. Therefore, this study shows how two different tooth-whitening peroxides could affect the molecular profiles of human teeth.

Dental anomalies in individuals with osteogenesis imperfecta: a systematic review and meta-analysis of prevalence and comparative studies.

BACKGROUND: Osteogenesis imperfecta (OI) is a rare genetic disorder primarily caused by mutations in the genes involved in the production of type 1 collagen. OI is also known as brittle bone disease. OBJECTIVE: This study aims to describe the prevalence of dental anomalies (except dentinogenesis imperfecta) in individuals with OI, and compare the prevalence of dental anomalies between individuals with and without OI and between individuals with different types of OI. SEARCH METHODS: Searches in PubMed, Web of Science, Scopus, Ovid, and gray literature were performed in October 2022. SELECTION CRITERIA: Observational studies (with or without a comparison group) that evaluated the prevalence of dental anomalies in individuals with OI. Data collection and analysis: Data items were extracted by two authors. Quality assessment employing the Joanna Briggs Institute checklists and meta-analyses was conducted. Results were provided in prevalence values and odds ratio (OR) / 95% confidence interval (CI). Strength of evidence was determined. RESULTS: Eighteen studies were included. Most prevalent dental anomalies in individuals with OI included pulp obliteration (46.4%), dental impaction (33.5%), dental impaction of second molars (27%), and tooth agenesis (23.9%). Individuals with OI type III/IV had 20.16-fold greater chance of exhibiting tooth discoloration in comparison with individuals with OI type I (CI: 1.10-370.98). In comparison with the group without OI, the individuals with OI had 6.90-fold greater chance of exhibiting dental impaction (CI: 1.54-31.00). High methodological quality was found in 47% of the studies. Strength of evidence was low or very low. CONCLUSIONS: Pulp obliteration, dental impaction, and tooth agenesis were the most prevalent dental anomalies in the OI group. Individuals with OI were more likely to have dental impaction than individuals without OI. Individuals with OI type III/IV (severe-moderate) are more likely to have tooth discoloration than individuals with OI type I (mild).

Effect of enamel surface coating on staining capability due to iron containing supplements on primary teeth: An in vitro study.

Background: Iron supplements prescribed to anemic children may results in teeth staining. Possible methods for preventing staining of primary teeth following exposure to iron supplements are need of an hour. Aim: This study was conducted with the aim to assess effect of enamel surface coating on staining capability of iron containing supplements in primary teeth. Settings and Design: This is an in vitro Experimental study. Methods: Hundred and forty-four primary incisors with intact crowns were sequentially numbered and randomly divided into four main groups of 36 samples receiving different enamel surface coating such as no surface coating, MI fluoride varnish™, GC G-coat Plus™ and GC-Equia®-forte-coat. Each group was subdivided into two groups, namely A (sound teeth) and B (artificially demineralized teeth). All the samples were immersed in 250 ml artificial saliva containing 10 ml of iron supplement to make the iron concentration 100 mg. The shade of the teeth was measured at baseline and at 90 days, using VITA Easy shade® V digital spectrophotometer. The data was statistically analyzed using the Kruskal-Wallis test and Mann-Whitney U test. Descriptive and inferential statistical analyses was made via SPSS 23. Results: Overall color change was found to be significantly less at the end of 90th day in sound samples when GC-Equia®-forte-coat was used as an enamel surface coating with pvalue of 0.017. In demineralized samples the overall color change was least at the end of 90th day when MI Varnish™ used as an enamel surface coating with P = 0.042. Conclusions: GC-Equia®-forte-coat, MI Varnish™ and GC-G-coat-plus™ can be used as a preventive or a precautionary measure to minimizes the staining of teeth. The amount of color change at the end of 90 days with GC-Equia®-forte-coat was least followed by MI varnish™, GC G coat Plus™ and control group.

Effect of chlorhexidine mouthwashes on periodontal parameters and extrinsic tooth staining in orthodontic patients.

INTRODUCTION: Periodontal health and biofilm control are primordial to success in orthodontic treatment. This study aimed to evaluate the effect of chlorhexidine (CHX) mouthwashes on periodontal status and extrinsic tooth staining in orthodontic patients. METHODS: Thirty-three patients of both sexes, aged 11-33 years, under orthodontic treatment with fixed appliances at <16 months, were randomly distributed into 2 groups. In the control group, patients received mechanical hygiene instruction, and in the experimental group, patients also used CHX wash twice a week for 60 days. The effectivity of the protocols was evaluated using the plaque, gingival, gingival bleeding, and discoloration indexes before the hygiene protocol was applied, 15, 30, and 60 days after protocol implementation. RESULTS: In the experimental group, there was a decrease in the plaque, gingival, and gingival bleeding indexes at the different evaluation periods (P <0.05). In addition, there was a significant difference in the discoloration index at 60 days compared with initial time points after implementing hygiene protocols in the experimental group (P <0.05). In contrast, there were no significant differences in plaque, gingival, gingival bleeding, and discoloration indexes in the control group at any time (P >0.05). CONCLUSIONS: CHX mouthwash administered 30 days, twice a week, significantly improved the periodontal status with mild brown staining. After this period, expressive extrinsic tooth staining was observed.

Fabrication and characterization of a novel injectable human amniotic membrane hydrogel for dentin-pulp complex regeneration.

OBJECTIVE: Injectable biomaterials that can completely fill the root canals and provide an appropriate environment will have potential application for pulp regeneration in endodontics. This study aimed to fabricate and characterize a novel injectable human amniotic membrane (HAM) hydrogel scaffold crosslinked with genipin, enabling the proliferation of Dental Pulp Stem Cells (DPSCs) and optimizing pulp regeneration. METHODS: HAM extracellular matrix (ECM) hydrogels (15, 22.5, and 30 mg/ml) crosslinked with different genipin concentrations (0, 0.1, 0.5, 1, 5, and 10 mM) were evaluated for mechanical properties, tooth discoloration, cell viability, and proliferation of DPSCs. The hydrogels were subcutaneously injected in rats to assess their immunogenicity. The hydrogels were applied in a root canal model and subcutaneously implanted in rats to determine their regenerative potential for eight weeks, and histological and immunostaining analyses were performed. RESULTS: Hydrogels crosslinked with low genipin concentration demonstrated low tooth discoloration, but 0.1 mM genipin crosslinked hydrogels were excluded due to their unfavourable mechanical properties. The degradation ratio was lower in hydrogels crosslinked with 0.5 mM genipin. The 30 mg/ml-0.5 mM crosslinked hydrogel exhibited a microporous structure, and the modulus of elasticity was 1200 PA. In vitro, cell culture showed maximum viability and proliferation in 30 mg/ml-0.5 mM crosslinked hydrogel. All groups elicited minimum immunological responses, and highly vascularized pulp-like tissue was formed in human tooth roots in both groups with/without DPSCs. SIGNIFICANCE: Genipin crosslinking improved the biodegradability of injectable HAM hydrogels and conferred higher biocompatibility. Hydrogels encapsulated with DPSCs can support stem cell viability and proliferation. In addition, highly vascularized pulp-like tissue formation by this biomaterial displayed potential for pulp regeneration.

Evaluation of the efficacy of a charcoal-based tooth whitening dentifrice on coffee stains: an in vitro study.

Background: Charcoal-based preparations have recently gained popularity, particularly in oral hygiene products such as tooth whitening dentifrices, owing to their abrasive and adsorptive properties. The present in vitro study evaluates the efficacy of a charcoal-based tooth whitening dentifrice compared with a non-charcoal-based whitening dentifrice in removing coffee stains on tooth surfaces. Methods: Thirty-three human extracted tooth specimens were randomly assigned to 1 of 3 study groups: Group 1 (charcoal-based whitening dentifrice [CBWD]), Group 2 (non-charcoal-based whitening dentifrice [NCBWD]), and Group 3 (distilled water [DW]). All tooth specimens were immersed in a prepared coffee extract for 4 weeks to facilitate staining and then mounted on blocks where they were brushed with an electric toothbrush daily for 8 seconds with 1 of the 2 allocated dentifrices or with DW for 4 weeks following staining. Spectrophotometric analysis was conducted using the CIELAB system to measure the L*, a*, and b* values at 3 time points: before staining, after staining, and following the brushing protocol. These values were used to calculate the colour change (ΔE) between time points. Results: Following the coffee staining, the tooth samples' whiteness (ΔL) decreased with the overall colour change (ΔE). Next, there was a significant improvement in the degree of tooth whiteness (ΔL) values following the brushing protocol in all 3 groups (p = 0.003), with the greatest improvement occurring in the CBWD group. However, the overall colour change (ΔE) was not significantly different between the groups. Conclusion: CBWD, NCBWD, and DW were effective in removing coffee stains from the tooth surface. However, the amount of colour change (ΔE) produced by CBWD was not significantly different from NCBWD or DW.

Introduction: Les préparations à base de charbon ont récemment gagné en popularité, en particulier dans les produits d'hygiène buccale comme les dentifrices blanchissants, en raison de leurs propriétés d'abrasion et d'adsorption. La présente étude in vitro évalue l'efficacité d'un dentifrice blanchissant à base de charbon par rapport à un dentifrice blanchissant sans charbon pour éliminer les taches de café sur la surface des dents. Méthodes: Trente-trois spécimens de dents humaines extraites ont été répartis aléatoirement dans 3 groupes d'étude : groupe 1 (dentifrice blanchissant à base de charbon [DBBC]), groupe 2 (dentifrice blanchissant sans charbon [DSC]) et groupe 3 (eau distillée [ED]). Tous les spécimens de dents ont été immergés dans une préparation de café pendant 4 semaines pour permettre la coloration, puis montés sur des blocs où ils ont été brossés quotidiennement à la brosse à dents électrique pendant 8 secondes avec l'un des deux dentifrices testés ou avec de l'eau distillée pour une période de 4 semaines après la coloration. Une analyse spectrophotométrique a été effectuée à l'aide du système CIELAB pour mesurer les valeurs L*, a* et b* à 3 moments précis : avant la coloration, après la coloration et après le protocole de brossage. Ces valeurs ont été utilisées pour calculer le changement de couleur (ΔE) entre les moments précis. Résultats: Après la coloration du café, la blancheur des échantillons de dents (ΔL) a diminué en raison du changement global de couleur (ΔE). Ensuite, il y a eu une amélioration significative du degré de blancheur des dents (ΔL) suivant le protocole de brossage dans les 3 groupes (p = 0,003), la plus grande amélioration ayant eu lieu dans le groupe DBBC. Toutefois, le changement global de couleur (ΔE) n'était pas significativement différent d'un groupe à l'autre. Conclusion: Les DBBC, DSC et l'ED se sont montrés efficaces pour éliminer les taches de café sur la surface des dents. Toutefois, le changement de couleur (ΔE) produit par le DBBC n'était pas significativement différent de celui produit par le DSC ou l'ED.

Effects of aerosols from heated tobacco products with flavors on the discoloration of bovine tooth enamel.

OBJECTIVES: This in vitro study assessed the potential of tooth discoloration by aerosols generated from three heated tobacco products (HTPs) with different specifications: in-direct heating tobacco system platform 1.0a (IT1.0a), in-direct heating tobacco system platform 2.0a (IT2.0a), and direct heating tobacco system platform 3.0a (DT3.0a). In addition, three flavor types (regular, menthol, and berry menthol) were selected for each HTP to characterize the effect of flavor types on tooth discoloration. MATERIAL AND METHODS: Six bovine tooth samples were exposed directly to aerosols generated from one pack of each HTP: 350 puffs for IT1.0a, 325 puffs for IT2.0a, and 220 puffs for DT3.0a. Six bovine tooth samples were also exposed to air (350 puffs) and smoke generated from one pack of cigarettes (160 puffs) as negative and positive controls, respectively. The color of each tooth sample was measured before and after exposure. The overall color changes were assessed using overall color differences (ΔE) calculated according to the Commission International de I'Eclairage color system. A one-way analysis of variance followed by Tukey's post hoc test was used to compare ΔE among bovine tooth samples exposed to air, cigarette smoke, and aerosols generated from each HTP. RESULTS: ΔE values for tooth samples exposed to air and aerosols generated from the three HTPs (IT1.0a, IT2.0a, and DT3.0a) were significantly lower than ΔE value for tooth samples exposed to cigarette smoke. ΔE values obtained with DT3.0a were significantly higher than those obtained with air-exposed control samples. However, ΔE values obtained with IT1.0a and IT2.0a were not significantly different from that obtained with air-exposed control samples. No HTPs showed significant differences in ΔE values among the three flavor types. CONCLUSIONS: This study showed that HTP aerosols reduce tooth discoloration potential compared with cigarette smoke, regardless of flavor types, and the tooth discoloration potential of the product may depend on product specifications.