PDMS-TiO2 composite films combined with LC-MS/MS for determination of phospholipids of urine in non-small cell lung cancer patients with traditional Chinese medicine syndromes.

Lung cancer is one of the most common malignant tumors in China. Most patients are already in the mid to advanced stages during the consultation and the survival rate is less than 23 % with a poor prognosis. Therefore, effective dialectical diagnosis of advanced cancer can guide individualized treatment to improve survival. Phospholipids are the building blocks of cell membranes and abnormal phospholipid metabolism is associated with plentiful diseases. Most studies of disease markers use blood as a sample. However, urine covers extensive metabolites that are produced during the body's metabolic processes. Therefore, the study of markers in urine can be used as a complement to improve the diagnosis rate of marker diseases. Moreover, urine is characterized by high water content, high polarity, and high inorganic salt, therefore the detection of phospholipids in urine is challenging. In this study, an original Polydimethylsiloxane (PDMS)-titanium dioxide (TiO2) composite film for sample pre-treatment coupled with the LC-MS/MS method for the determination of phospholipids in the urine with high selectivity and low matrix effects was prepared and developed. The extraction process was scientifically optimized by the single-factor test. After systematic validation, the established method was successfully applied to the accurate determination of phospholipid substances in the urine of lung cancer patients and healthy subjects. In conclusion, the developed method has great potential for the development of lipid enrichment analysis in urine and can be used as a beneficial tool for cancer diagnosis and Chinese medicine syndrome typing.

Porous aromatic framework/polydimethylsiloxane coated stir bar sorptive extraction coupled with high performance liquid chromatography-diode array detection of trace polychlorinated biphenyls analysis in environmental waters.

A porous aromatic framework (PAF-47) synthesized through Suzuki coupling reaction was introduced to prepare PAF-47/polydimethylsiloxane (PDMS) coated stir bar by sol-gel technique. PAF-47/PDMS coating provided high extraction recovery (77.6-90.6%, the ratio of actual enrichment factor (EF) to theoretical EF) for five polychlorinated biphenyls (PCBs) in a relatively short time (60 min), exhibiting a faster extraction kinetics over commercial PDMS coating (12/24 h). Based on this, a new method based on PAF-47/PDMS coated stir bar sorptive extraction and high-performance liquid chromatography-diode array detection was proposed for trace analysis of target PCBs in environmental water. Under the optimized conditions, the limits of detection for five PCBs were within 44-70 ng/L, with actual EF of 64.0-71.5-fold (maximal EF of 83.3-fold). This method was successfully used to detect trace PCBs in Yangtze River water and East Lake water, with recoveries of 81.0-113% and 86.1-111%, respectively.

Magic extraction: solid-phase extraction and analytical pyrolysis to study polycyclic aromatic hydrocarbon and polychlorinated biphenyls in freshwater.

Polycyclic aromatic hydrocarbons and polychlorinated biphenyls are commonly categorized as persistent organic pollutants. In order to analyze these pollutants, customized stationary phases are increasingly being developed and synthesized for solid-phase extraction. In this work, we tested a new solventless solid-phase extraction approach based on the use of a Magic Chemisorber® (Frontier Lab) which consists of a bead-covered polydimethylsiloxane stationary phase with a thickness of 500 µm. These devices are directly immersed into aqueous samples and then introduced into a pyrolysis-gas chromatography-mass spectrometry system equipped with a cryofocusing system for the thermal desorption and analysis of the adsorbed species. Our new method performs better than the most recent solid-phase extraction devices, with limits of detection lower than 2.7 ng/L and limits of quantification lower than 9.0 ng/L. The method was tested on standard compounds and on an environmental sample, showing the potential to characterize other chemical species besides the persistent organic pollutants, such as phthalate plasticizers and antioxidants.

Combined Statistical Analyses of Forensic Evidence in Sexual Assault: A Case Report and Brief Review of the Literature.

DNA analysis has been widely used in the forensic field in order to contribute to identifying the perpetrator of a crime. Forensic investigation in sexual assaults usually focuses on locating and identifying biological fluids, followed by DNA analysis. The identification of certain compounds present in condoms can be useful to reconstruct the occurred event, especially in cases of sexual assaults where the DNA analysis did not show the presence of a male profile and where RNA analysis did not show the presence of sperm markers. Herein we describe the case of a woman reporting to be victim of sexual assault, who was not able to provide accurate information concerning the dynamics of the event; she remembered only forced penile-vaginal penetration by a single perpetrator. We performed short tandem repeat (STR) analyses and mRNA typing for forensic genetics testing on vaginal and rectal swabs collected on the victim, and Fourier-transform infrared spectroscopy (FTIR) followed by chromatographic analyses for the detection of condom compounds on the same swabs. The STR analysis showed only the victim's genetic profile, and RNA analysis showed only the presence of vaginal and skin markers. In this situation, the identification of condom compounds residues on vaginal swabs became important as it complemented other collected evidences allowing the Court to reconstruct the events. A proposal of likelihood ratio (LR) calculation for the assessment of the weight of evidence in this case is described.

Surface analysis tools for characterizing biological materials.

Surfaces represent a unique state of matter that typically have significantly different compositions and structures from the bulk of a material. Since surfaces are the interface between a material and its environment, they play an important role in how a material interacts with its environment. Thus, it is essential to characterize, in as much detail as possible, the surface structure and composition of a material. However, this can be challenging since the surface region typically is only minute portion of the entire material, requiring specialized techniques to selectively probe the surface region. This tutorial will provide a brief review of several techniques used to characterize the surface and interface regions of biological materials. For each technique we provide a description of the key underlying physics and chemistry principles, the information provided, strengths and weaknesses, the types of samples that can be analyzed, and an example application. Given the surface analysis challenges for biological materials, typically there is never just one technique that can provide a complete surface characterization. Thus, a multi-technique approach to biological surface analysis is always required.

Cross-linked polydimethylsiloxane colloid as novel contrast agent for gastrointestinal magnetic resonance imaging: Transient nuclear Overhauser effect within the interface.

With good contrast in T1 and T2 weighted imaging as well as low toxicity in 3- (4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay, this work proposes the cross-linked polydimethylsiloxane colloids as a novel non-ionic contrast agent for gastrointestinal magnetic resonance imaging. The experiments of nuclear magnetic resonance spectra and relaxation show that within the interface of the colloids, there are nuclear Overhauser effect and transient nuclear Overhauser effect (cross-relaxation). Regarding the longitudinal relaxation experiments of CH2CH2O segments of Tween 80, a two spins system is found and modeled well by the equation IZ-I0= S0((1-X) e-tD1 -(1+X) e-tT1) which is deduced based on the transient nuclear Overhauser effect proposed by Solomon. The arbitrary constant X is additionally added with the initial conditions (Iz - I0)t=0 = -2XS0 and (Sz - S0)t=0 = -2S0. For the two spins system, D1 and T1 are corresponding to longitudinal relaxation times of the bound water and the CH2CH2O respectively. Concerning the transverse relaxation experiments of the CH2CH2O, they agree with the equation with three exponential decays, defined by three relaxation times, likely corresponding to three mechanisms. These mechanisms possibly are intramolecular and intermolecular dipole-dipole (DD) interactions and scalar coupling. Within the interface, hydrogen bonding causes the positive nuclear Overhauser effect of the CH2CH2O's nuclear magnetic resonance spectra, the transient nuclear Overhauser effect of the CH2CH2O's longitudinal relaxation experiments and the intermolecular dipole-dipole interactions of the CH2CH2O's transverse relaxation experiments.

Pre-analytical considerations of condom traces: A review of composition, background, transfer and persistence.

Today, rape and sexual assault cases are mainly solved using evidence such as medical evidence or DNA analysis. Condom traces have been found to be present in 10% of assaulted women, when no DNA is found [1]. Numerous studies have emphasized the interest of analysing the composition of male condoms and their traces, and developing specific methods for the analysis of this type of evidence. However, transfer and persistence of condom traces in a specific matrix are rarely referenced. Therefore, forensic scientists have no complete knowledge of the trace and what could be expected in a real case. The purpose of this article is to review the literature addressing the composition of condoms and their traces as well as its influence on the transfer and persistence from a forensic point of view. Peer-reviewed literature, patents, professional literature, data from international administrations and international organisations' reports have been used to track the composition and the problematics of transfer and persistence of condom traces. The results of this review show that the composition of male condoms and their traces are complex systems, with numerous compounds originating from the condom at the moment of the transfer and evolving over time according to specific persistence patterns. Although numerous types of analyses have already been proposed and tested for condom traces, forensic evidence considerations have not been fully studied yet. Considering the fact that sexual assaults without the detection of DNA are increasingly frequent, there is a definite medical and forensic need to improve our knowledge of the processes involved in the development of condom traces in order to better understand analytical results.

Degas-Driven Deterministic Lateral Displacement in Poly(dimethylsiloxane) Microfluidic Devices.

In this work, degas-driven microfluidic deterministic lateral displacement devices were fabricated from poly(dimethylsiloxane). Two device configurations were considered: one with a single input for the enrichment of particles and the other one with sheath inputs for the separation of particles based on their sizes. Using the single-input device, the characteristics of the degas-driven fluid through micropillars were investigated, and then selective enrichment of fluorescent polymer particles with diameters of around 13 µm mixed with similar 7 µm particles was demonstrated. Using the sheath-input device, the separation of 13 and 7 µm beads was achieved (the corresponding purities exceeded 92.62% and 99.98%, respectively). In addition, clusters composed of 7 µm beads (including doublets, triplets, and quadruplets) were fractionated based on their equivalent sizes. Finally, white blood cells could be separated from red blood cells at a relatively high capture efficiency (95.57%) and purity (86.97%).

Quantification of Silicone Oil and Its Degradation Products in Aqueous Pharmaceutical Formulations by 1H-NMR Spectroscopy.

During the past years, there has been an increasing focus on the presence of silicone oil as a contaminant in pharmaceutical formulations kept in prefilled syringes (PFSs). As the PFSs are coated on the inner wall with silicone oil (polydimethylsiloxane), there is a potential risk that the oil can migrate from the inner surface of the primary packing material into the aqueous solution. Several studies have demonstrated that presence of silicone oil as droplets in a high-concentrated protein formulation can cause protein aggregation. Hence, because the use of silicone-coated primary packing material for protein formulations are increasing, the call for an easy and quantitative method for determination of silicone oil and its degradation products in pharmaceutical formulations is therefore needed. Several analytical techniques have in the past been developed with the aim of detecting the presence of silicone oil and degradation products hereof. Most of these methods require hydrolyzation, derivatization, and extraction steps followed by, for example, gas chromatography-mass spectrometry analysis. Applying these methods can cause a loss in detection or an overestimation of the hydrolytic degradation products of silicone oil, that is, trimethylsilanol and dimethylsilanediol. The 2 silanols are highly hydrophilic and prefers the aqueous environment. Analysis of an aqueous formulation obtained from a PFS by 1H-NMR spectroscopy provides data about the content and levels of silicone oil and the 2 silanols even in levels below 10 ppm. The 1H-NMR method offers an easy and direct, quantitative measurement of samples intended for clinical use and samples kept at elevated temperature for a prolonged time (i.e., stability studies). The result of the study presented here showed dimethylsilanediol to be the main silicone compound present in the aqueous formulation when kept in baked-on PFSs. The degradation product dimethylsilanediol, in full accordance with expected hydrolytic degradation of silicone oil, increased during storage and with elevated temperature. In addition, the method can be applied to aqueous samples where polydimethylsiloxane has been added as, for example, the major constituent of antifoam.

An improved quantification method for 12 linear dimethylsiloxanes and 1 cyclic dimethylsiloxane in polydimethylsiloxane using gas chromatography-flame ionization detector：Development strategy and accuracy.

PDMS 200 fluid (the mixture) was used as standard for quantification of linear dimethylsiloxanes (L5-L16) in environmental matrices. However, the quantification of individual dimethylsiloxane in PDMS 200 fluid by GC-FID was not established or detailed described in many real studies. To solve this problem, we did this research and the principal results were as follows: fifteen compounds in PDMS 200 fluid, including D7, L5 to L16 (12 linear dimethylsiloxanes) and 2 unknown compounds, were identified using GC-MS. Retention indices (RI) of L8 to L16 were first given. Meanwhile, we found that the "effective carbon number (ECN) concept" was applicable for responses of dimethylsiloxanes in FID. Based on GC-FID, a new quantification method for compounds in PDMS 200 fluid was established, detailed described and used to calculate the content of individual dimethylsiloxane in PDMS 200 fluid. Compared with the results from external standard method, internal standard method and normalization method, the new quantification method was more accurate and stable, especially for D7 at low content.

Frying oils with high natural or added antioxidants content, which protect against postprandial oxidative stress, also protect against DNA oxidation damage.

PURPOSE: Using sunflower oil as frying oil increases postprandial oxidative stress, which is considered the main endogenous source of DNA oxidative damage. We aimed to test whether the protective effect of virgin olive oil and oil models with added antioxidants against postprandial oxidative stress may also protect against DNA oxidative damage. METHODS: Twenty obese people received four breakfasts following a randomized crossover design consisting of different oils [virgin olive oil (VOO), sunflower oil (SFO), and a mixed seed oil (SFO/canola oil) with added dimethylpolysiloxane (SOX) or natural antioxidants from olives (SOP)], which were subjected to 20 heating cycles. RESULTS: We observed the postprandial increase in the mRNA levels of p53, OGG1, POLB, and GADD45b after the intake of the breakfast prepared with SFO and SOX, and an increase in the expression of MDM2, APEX1, and XPC after the intake of the breakfast prepared with SFO, whereas no significant changes at the postprandial state were observed after the intake of the other breakfasts (all p values <0.05). We observed lower 8-OHdG postprandial levels after the intake of the breakfast prepared with VOO and SOP than after the intake of the breakfast prepared with SFO and SOX (all p values <0.05). CONCLUSIONS: Our results support the beneficial effect on DNA oxidation damage of virgin olive oil and the oil models with added antioxidants, as compared to the detrimental use of sunflower oil, which induces p53-dependent DNA repair pathway activation.

How do PDMS-coated stir bars used as passive samplers integrate concentration peaks of pesticides in freshwater?

Passive samplers are theoretically capable of integrating variations of concentrations of micropollutants in freshwater and providing accurate average values. However, this property is rarely verified and quantified experimentally. In this study, we investigated, in controlled conditions, how the polydimethylsiloxane-coated stir bars (passive Twisters) can integrate fluctuating concentrations of 20 moderately hydrophilic to hydrophobic pesticides (2.18 < Log K ow < 5.51). In the first two experiments, we studied the pesticide accumulation in the passive Twisters during high concentration peaks of various durations in tap water. We then followed their elimination from the passive Twisters placed in non-contaminated water (experiment no. 1) or in water spiked at low concentrations (experiment no. 2) for 1 week. In the third experiment, we assessed the accuracy of the time-weighted average concentrations (TWAC) obtained from the passive Twisters exposed for 4 days to several concentration variation scenarios. We observed little to no elimination of hydrophobic pesticides from the passive Twisters placed in non-contaminated water and additional accumulation when placed in water spiked at low concentrations. Moreover, passive Twisters allowed determining accurate TWAC (accuracy, determined by TWAC-average measured concentrations ratios, ranged from 82 to 127 %) for the pesticides with Log K ow higher than 4.2. In contrast, fast and large elimination was observed for the pesticides with Log K ow lower than 4.2 and poorer TWAC accuracy (ranging from 32 to 123 %) was obtained.

Application of response surface methodology to optimize solid-phase microextraction procedure for chromatographic determination of aroma-active monoterpenes in berries.

Most of scientific papers concern the qualitative or semi-quantitative analysis of aroma-active terpenes in liquid food matrices. Therefore, the procedure based on solid-phase microextraction and two-dimensional gas chromatography-time-of-flight mass spectrometry for determination of monoterpenes in fresh berries was developed. The optimal extraction conditions using divinylbenzene-carboxen-polydimethylsiloxane fiber were: temperature of 50°C, extraction time of 26min, equilibrium time of 29min. The developed procedure provides a high recovery (70.8-99.2%), good repeatability (CV<10.4%), high linearity (r>0.9915) and offers practical advantages over currently used methods: reliability of compounds identification, simplicity of extraction and at least one order of magnitude lower detection limits (0.10-0.011µg/L). The method was successfully applied to determine monoterpenes in 27 berry samples of different varieties and 4 berry products. Tukey's test revealed that monoterpenes content is a reliable indicator of fruit maturity and origin. It suggests that the method may be of interest to researchers and food industry.

Applicability of polydimethylsiloxane (PDMS) and polyethersulfone (PES) as passive samplers of more hydrophobic organic compounds in intertidal estuarine environments.

The uptake calibration of three passive samplers, stir-bars, MESCO/stir-bars and polyethersulfone tubes (PESt), was assessed in seawater at different salinities for 17 organic compounds including organochlorine compounds, pesticides, phthalates, musk fragrances and triclosan. The calibration procedure was accomplished by exposing the samplers to a continuous flow of fortified seawater for up to 14days under laboratory conditions. Prior to the exposure, stir-bars and MESCO/stir-bars were loaded with a known amount of deuterated PAH mixture as performance reference compounds (PRC). For most of the studied compounds, the sampling rates (Rs, mL·day-1) were determined for each sampler at two salinities (15 and 30‰) and two nominal concentrations (25 and 50ng·L-1). Among the tested devices, though PES can be an outstanding cheap alternative to other passive samplers, naked or free stir-bars provided the best results in terms of uptake rates (i.e., the Rs values ranged from 30 to 350mL·day-1). Regarding the variation of the salinity, the Rs values obtained with naked stir-bars were statistically comparable in the full range of salinities (0-30‰) but the values obtained with MESCO/stir-bars and PESt were salinity dependent. Consequently, only stir-bars assured the required robustness to be used as passive samplers in intertidal estuarine environments. Finally, the stir-bars were applied to estimate the time-weighted average concentration of some of those contaminants in the feeding seawater of the experimental aquaria at the Plentzia Marine Station (Basque Country) and low levels of musks fragrances (0.1-0.2ng·L-1) were estimated.

Trophic dilution of cyclic volatile methylsiloxanes (cVMS) in the pelagic marine food web of Tokyo Bay, Japan.

Bioaccumulation and trophic transfer of cyclic volatile methylsiloxanes (cVMS), specifically octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6), were evaluated in the pelagic marine food web of Tokyo Bay, Japan. Polychlorinated biphenyl (PCB) congeners that are "legacy" chemicals known to bioaccumulate in aquatic organisms and biomagnify across aquatic food webs were used as a benchmark chemical (CB-180) to calibrate the sampled food web and as a reference chemical (CB-153) to validate the results. Trophic magnification factors (TMFs) were calculated from slopes of ordinary least-squares (OLS) regression models and slopes of bootstrap regression models, which were used as robust alternatives to the OLS models. Various regression models were developed that incorporated benchmarking to control bias associated with experimental design, food web dynamics, and trophic level structure. There was no evidence from any of the regression models to suggest biomagnification of cVMS in Tokyo Bay. Rather, the regression models indicated that trophic dilution of cVMS, not trophic magnification, occurred across the sampled food web. Comparison of results for Tokyo Bay to results from other studies indicated that bioaccumulation of cVMS was not related to type of food web (pelagic vs demersal), environment (marine vs freshwater), species composition, or location. Rather, results suggested that differences between study areas was likely related to food web dynamics and variable conditions of exposure resulting from non-uniform patterns of organism movement across spatial concentration gradients.

Nontarget screening using passive air and water sampling with a level II fugacity model to identify unregulated environmental contaminants.

It is thought that there are many unregulated anthropogenic chemicals in the environment. For risk assessment of chemicals, it is essential to estimate the predicted environmental concentrations. As an effort of identifying residual organic contaminants in air and water in Korea, nontarget screening using two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS) was conducted at 10 sites using polyurethane foam passive air sampler and at 6 sites using polydimethyl siloxane (PDMS) passive water sampler in three different seasons in 2014. More than 600 chemical peaks were identified satisfying the identification criteria in air and water samples, respectively, providing a list for further investigation. Chemical substances with reported national emission rates in 2014 (n=149) were also screened for potential existence in the environment using a level II fugacity model. Most of chemical substances classified as not detectable were not identified with detection frequency greater than 20% by nontarget screening, indicating that a simple equilibrium model has a strong potential to be used to exclude chemicals that are not likely to remain in the environment after emissions from targeted monitoring.

Determination of n-alkanes contamination in soil samples by micro gas chromatography functionalized by multi-walled carbon nanotubes.

A new method for separation of 11 n-alkanes: octane, o-nonane, n-decane, n-undecane, n-dodecane, n-tridecane, n-tetradecane, n-pentdecne, n-hexadecath, heptadecane, n-octadecane in soil samples was developed. Kuderna-Danish (K.D.) concentrator enrichment prior to ultrasonic extraction and the silicone chromatography column purification and with gas chromatography flame ionization detection (GC-FID) could be used for n-alkanes determination. The micro channels of open tubular column were fabricated onto a silicon wafer to replace the quartz capillary chromatographic column. The column structure and analysis parameters that affected the column separation were investigated and optimized. Under optimal conditions, the extract reagent was centrifuged and collected. A silicone chromatography column and a K.D. concentrator were used for further clean-up and enrichment. Using this method, the limits of detection (LOD) and limits of quantification (LOQ) were obtained in the range of 0.03-0.15 and 0.1-0.5 mg kg(-1) in soil samples, respectively. The relative standard deviation (RSD) was under 12%. The optimized procedure that presented good analytical performance (with recoveries ranging from 56.5% to 89.2%), was successfully applied to determine n-alkane content in farmland soil samples adjacent to a highway. The results showed that the MWCNTs-functionalized column is capable of separating the alkane contaminations with high resolution in about 3 min, which is much shorter than that of GC-MS and other conventional analytical methods, demonstrating its great potential for rapid analysis.

Detection of polydimethylsiloxanes transferred from silicone-coated parchment paper to baked goods using direct analysis in real time mass spectrometry.

The non-stick properties of parchment papers are achieved by polydimethylsiloxane (PDMS) coatings. During baking, PDMS can thus be extracted from the silicone-coated parchment into the baked goods. Positive-ion direct analysis in real time (DART) mass spectrometry (MS) is highly efficient for the analysis of PDMS. A DART-SVP source was coupled to a quadrupole-time-of-flight mass spectrometer to detect PDMS on the contact surface of baked goods after use of silicone-coated parchment papers. DART spectra from the bottom surface of baked cookies and pizzas exhibited signals because of PDMS ions of the general formula [(C2H6SiO)n + NH4 ](+) in the m/z 800-1900 range.

Critical Role of the Immobile Zone in Non-Fickian Two-Phase Transport: A New Paradigm.

Using a visualization setup, we characterized the solute transport in a micromodel filled with two fluid phases using direct, real-time imaging. By processing the time series of images of solute transport (dispersion) in a two fluid-phase filled micromodel, we directly delineated the change of transport hydrodynamics as a result of fluid-phase occupancy. We found that, in the water saturation range of 0.6-0.8, the macroscopic dispersion coefficient reaches its maximum value and the coefficient was 1 order of magnitude larger than that in single fluid-phase flow in the same micromodel. The experimental results indicate that this non-monotonic, non-Fickian transport is saturation- and flow-rate-dependent. Using real-time visualization of the resident concentration (averaged concentration over a representative elementary volume of the pore network), we directly estimated the hydrodynamically stagnant (immobile) zones and the mass transfer between mobile and immobile zones. We identified (a) the nonlinear contribution of the immobile zones to the non-Fickian transport under transient transport conditions and (b) the non-monotonic fate of immobile zones with respect to saturation under single and two fluid-phase conditions in a micromodel. These two findings highlight the serious flaws in the assumptions of the conventional mobile-immobile model (MIM), which is commonly used to characterize the transport under two fluid-phase conditions.

Volatile dimethylsiloxanes in market seafood and freshwater fish from the Xúquer River, Spain.

Volatile dimethylsiloxanes are a family of synthetic organosilicon-compounds, which have received rising attention because of their widespread use and occurrence in the environment. In the present work, an analytical method based on ultrasound-assisted solid-liquid extraction (USAE) followed by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) has been optimized and applied to assess the presence of eight volatile dimethyl siloxanes (VMS) (hexamethylcyclotrisiloxane (D3), octamethylcyclotetra-siloxane (D4), decamethylcyclopentasiloxane (D5), dodecamethylcyclohexasiloxane (D6), octamethyltrisiloxane (MDM), decamethyltetrasiloxane (MD2M) and dodecamethylpentasiloxane (MD3M) and tetradecamethylhexasiloxane (MD4M)) in fish. The optimized method presented limits of quantification between 0.1 and 1.3 pg/g for linear volatile dimethylsiloxanes (lVMS) and between 13 and 39 pg/g for cyclic volatile dimethylsiloxanes (cVMS) and intraday relative standard deviation (between 1.9 and 7.0%). Recovery yields were between 71 and 92%. 40 fish samples collected in different markets in Barcelona, (Spain), and 16 samples of fish directly collected at the Xúquer River were analysed. cVMS were detected in almost all the river fish samples at concentrations between pg/g and ng/g, with a significant correlation between the fat content and VMS concentrations in fish. In addition, significant higher concentrations were found in market samples, suggesting sources of contamination from their manipulation and storage in indoor environments. Multivariate analyses were applied to the results and the siloxane profiles and analyte correlations are discussed.