Ratiometric emission of Tb(III)-functionalized Cd-based layered MOFs for portable visual detection of trace amounts of diquat in apples, potatoes and corn.

Diquat (DQ) is a typical bipyridine herbicide widely used to control weeds in fields and orchards. The severe toxicity of diquat poses a serious threat to the environment and human health. Metal-organic frameworks (MOFs) have received widespread attention due to their unique physical and chemical properties and applications in the detection of toxic and harmful substances. In this work, a two-dimensional (2D) Tb(III) functionalized MOF Tb(III)@1 (1 = [Cd(HTATB)(bimb)]n·H2O (Cd-MOF), H3TATB = 4,4',4″-triazine-2,4,6-tribenzoicacid, bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene) has been prepared and characterized. Tb(III)@1 has excellent optical properties and high water and chemical stability. After the Tb(III) is fixed by the uncoordinated -COO- in the 1 framework, Tb(III)@1 emits the typical green fluorescence of the lanthanide ion Tb(III) through the "antenna effect". It is worth noting that Tb(III)@1 can be used as a dual emission fluorescence chemical sensor for the ratio fluorescence detection of pesticide DQ, exhibiting a relatively low detection limit of 0.06 nM and a wide detection range of 0-50 nM. After the addition of DQ, a rapid color change of Tb(III)@1 fluorescence from green to blue was observed due to the combined effects of IFE, FRET and dynamic quenching. Therefore, a simple test paper box has been designed for direct on-site determination of pesticide DQ. In addition, the developed sensor has been successfully applied to the detection of DQ in real samples (fruits a Yin-Xia Sun and Bo-Tao Ji contributed equally to this work and should be considered co-first authors.nd vegetables) with satisfactory results. The results indicate that the probe developed in this study has broad application prospects in both real sample detection and actual on-site testing.

Micelle-dominated distribution strategy for non-matrix matched calibration without an internal standard: "Extract-and-shoot" approach for analyzing hydrophilic targets in blood and cell samples.

The analysis of trace hydrophilic targets in complex aqueous-rich matrices is considerably challenging, generally requiring matrix-matched calibration, internal standard, or time-and-labor-intensive sample preparation. To address this analytical bottleneck, a non-matrix-matched calibration strategy without using internal standard was reported for the first time to analyze complicated biosamples such as whole blood, plasma, serum, and cell samples. This strategy, termed micelle-dominated distribution, also aimed at realizing the simple "extract-and-shoot" analytical process for such complex matrices. The micelle-matrix interaction was found to efficiently eliminate the matrix effect by dominating phase separation and analyte distribution between the extraction and matrix phases. Thus, calibration linear curves prepared in water were applicable to the analysis of all the above-mentioned sample types. Rapid distribution equilibrium within 4 min was achieved. This strategy could tolerate direct large volume injection, thereby providing two-order-of-magnitude enhancement in the sensitivity of ion-pair chromatography. The analytical method integrated cell rupture, matrix cleanup, analyte extraction, and on-column preconcentration into a fast and high-throughput operation. The successful application to the determination of exogenous pesticides and endogenous glutathione exhibited low limits of detection (0.0085-0.015 µg mL-1 for pesticides; 0.52 µg mL-1 for glutathione), wide linear ranges (0.028-50 µg mL-1 and 0.049-50 µg mL-1 for pesticides; 1.7-1000 µg mL-1 for glutathione), good linearies (R2 = 0.9994-0.9999), excellent accuracy (recoveries of 91.3-105.2%), and good precision (0.7-6.2% at the levels of 0.028 (or 0.049), 0.1, 0.5, and 50 µg mL-1 for pesticides; 0.5-8.7% at 1.7, 500, and 1000 µg mL-1 for glutathione).

Sulfonate-Functionalized Mesoporous Silica Nanoparticles as Carriers for Controlled Herbicide Diquat Dibromide Release through Electrostatic Interaction.

Environmental stimuli-responsive pesticide release is desirable for enhanced efficiency and reduced side effects. In most cases, the loading and release of pesticides mainly depends on hydrophobic interactions and hydrogen bonding. Electrostatic interaction is less investigated as a weapon for achieving high loading content and controlled pesticide release. In this work, negative-charge decorated mesoporous silica nanoparticles (MSNs) were facilely fabricated by introducing sulfonate groups onto MSNs through a post-grafting method. Sulfonate-functionalized MSNs (MSN-SO3) were synthesized by conversion of epoxy group into sulfonate group using a bisulfite ion as a ring opening reagent. Diquat dibromide (DQ), one of the globally used quaternary ammonium herbicides, was efficiently loaded into these negatively charged MSN-SO3 nanoparticles. The loading content was increased to 12.73% compared to those using bare MSNs as carriers (5.31%). The release of DQ from DQ@MSN-SO3 nanoparticles was pH and ionic strength responsive, which was chiefly governed by the electrostatic interactions. Moreover, DQ@MSN-SO3 nanoparticles exhibited good herbicidal activity for the control of Datura stramonium L., and the bioactivity was affected by the ionic strength of the release medium. The strategy of cargo loading and release dependent on the electrostatic interactions could be generally used for charge-carrying pesticides using carriers possessing opposite charges to mitigate the potential negative impacts on the environment.

Carbon nanotube-based magnetic and non-magnetic adsorbents for the high-efficiency removal of diquat dibromide herbicide from water: OMWCNT, OMWCNT-Fe3O4 and OMWCNT-κ-carrageenan-Fe3O4 nanocomposites.

In this study, carbon nanotube-based adsorbents, oxidized multi-walled carbon nanotube (OMWCNT) with non-magnetic property and OMWCNT-Fe3O4 and OMWCNT-κ-carrageenan-Fe3O4 nanocomposites with magnetic property, having different structural and surface properties were prepared and their adsorptive properties for the removal of toxic diquat dibromide (DQ) herbicide from water by adsorption were determined in detail. For each adsorption system, the effects of initial DQ concentration, contact time and temperature on the adsorption processes were determined. Equilibrium time was found to be 300 min for DQ solutions. OMWCNT showed faster adsorption and higher maximum adsorption capacity value than magnetic adsorbents. With increasing initial herbicide concentration from 5.43 mg.L-1 to 16.3 mg.L-1, the values of initial sorption rate exhibited a decrease from 29.1 mg.g-1.min-1 to 4.28 mg.g-1.min-1 for OMWCNT-DQ system, from 1.21 mg.g-1.min-1 to 0.823 mg.g-1.min-1 for OMWCNT-Fe3O4-DQ system and from 0.674 mg.g-1.min-1 to 0.612 mg.g-1.min-1 OMWCNT-κ-carrageenan-Fe3O4 system. Maximum adsorption capacity value of OMWCNT was approximately 2.8-fold higher than magnetic OMWCNT-Fe3O4 and 5.4-fold higher than magnetic OMWCNT-κ-carrageenan-Fe3O4 at 25 °C. Adsorption kinetic and isotherm data obtained for all adsorption systems were well-fitted by pseudo second-order and Langmuir models, respectively. Thermodynamic parameters indicated that the adsorption of DQ onto carbon nanotube-based adsorbents was spontaneous and endothermic process. Furthermore, OMWCNT having the highest herbicide adsorption capacity could be regenerated and reused at least five times. This study showed that carbon nanotube-based adsorbents with magnetic and non-magnetic property were of high adsorption performance for the removal of DQ from water and could be promising adsorbent materials for the efficient removal of herbicides from wastewaters.

Adsorption of the herbicides diquat and difenzoquat on polyurethane foam: Kinetic, equilibrium and computational studies.

This work reports a study about the adsorption of the herbicides diquat and difenzoquat from aqueous medium employing polyurethane foam (PUF) as the adsorbent and sodium dodecylsulfate (SDS) as the counter ion. The adsorption efficiency was shown to be dependent on the concentration of SDS in solution, since the formation of an ion-associate between cationic herbicides (diquat and difenzoquat) and anionic dodecylsulfate is a fundamental step of the process. A computational study was carried out to identify the possible structure of the ion-associates that are formed in solution. They are probably formed by three units of dodecylsulfate bound to one unit of diquat, and two units of dodecylsulfate bound to one unit of difenzoquat. The results obtained also showed that 95% of both herbicides present in 45mL of a solution containing 5.5mgL-1 could be retained by 300mg of PUF. The experimental data were well adjusted to the Freundlich isotherm (r2 ≥ 0.95) and to the pseudo-second-order kinetic equation. Also, the application of Morris-Weber and Reichenberg equations indicated that an intraparticle diffusion process is active in the control of adsorption kinetics.

Sorption of the herbicides diquat and difenzoquat from aqueous medium by polymeric resins in the presence of sodium dodecylsulfate: Kinetic and mechanistic study.

The goal of this work was to propose a novel method for the solid-phase extraction of the herbicides diquat (DQT(2+)) and difenzoquat (DFQT(+)) from aqueous medium using polymeric Amberlite XAD-2 and XAD-4 resins in the presence of sodium dodecylsulfate (SDS). The addition of SDS to the medium was of fundamental importance in order to allow the formation of a negatively charged surface able to sorb the cationic solutes. Several factors that could influence the sorption process, such as SDS concentration in the medium, sorbent mass, pH, ionic strength, and initial concentration of the solutes were investigated. Kinetic studies were also performed to model the system and to identify the mechanisms that operate the sorption process of the herbicides. SDS concentration in the medium presented remarkable influence on the extraction efficiency, achieving maximum values when the ratios [SDS]/[herbicide] were approximately 90, for XAD-2, and 22 and 11 for DQT(2+) and DFQT(+), respectively, for XAD-4. The sorption process followed a pseudo second-order kinetic in all cases studied. It was also found that an intraparticle diffusion process controlled exclusively the sorption of the herbicides by the Amberlite XAD-2 and XAD-4 resins in the first 15 min, becoming less active with time.

Structure and spectral characteristics of diquat-cucurbituril complexes from density functional theory.

Electronic structure, (1)H NMR and infrared spectra of diquat (6,7-dihydrodipyrido[1,2-b:1',2'-e] pyrazine-5,8-diium or DQ(2+)) encapsulated by cucurbit[n]uril (n = 7,8) hosts are obtained using the density functional theory. Theoretical calculations have shown that both CB[7] or CB[8] host possesses strong affinity toward DQ(2+) compared to its reduced cation or neutral species. Calculated (1)H NMR spectra reveal that Hα protons on bi-pyridinium rings of DQ(2+)@CB[8] complex are de-shielded owing to C=O⋯H interactions. On the other hand aromatic (Hß and Hδ) of DQ(2+) within the CB[8] cavity exhibit significant shielding. The complexation of CB[8] with DQ(2+) splits the carbonyl stretching vibration (1788 cm(-1)) into two distinct vibrations which correspond to 1765 cm(-1) arising from hydrogen bonded carbonyls and the 1792 cm(-1) band from non-interacting ones. Further, the CN stretching vibration in DQ(2+) exhibits a frequency blue-shift of 6 cm(-1) on its encapsulation within the CB[8] cavity. The direction of frequency shift has been explained on the basis of natural bond orbital analyses.

A pillar[6]arene with mono(ethylene oxide) substituents: synthesis and complexation with diquat.

A pillar[6]arene with mono(ethylene oxide) groups was synthesized and it formed a highly stable inclusion complex with diquat, while the pillar[5]arene analogue did not.

Colorimetric and fluorescent dual detection of paraquat and diquat based on an anionic polythiophene derivative.

We have developed a colorimetric and fluorescent dual-response probe for the detection of paraquat and diquat in aqueous solutions based on an anionic polythiophene derivative. The detection limit of this approach can be as low as 10(-9) M by fluorescence measurements.

Complexation of triptycene-derived macrotricyclic polyether with paraquat derivatives, diquat, and a 2,7-diazapyrenium salt: guest-induced conformational changes of the host.

Complexation between a triptycene-derived macrotricyclic polyether containing two dibenzo-[30]-crown-10 cavities and different functionalized paraquat derivatives, diquat, and a 2,7-diazapyrenium salt in both solution and solid state was investigated in detail. It was found that depending on the guests with different terminal functional groups and structures, the macrotricyclic polyether could form 1:1 or 1:2 complexes with the guests in different complexation modes in solution and also in the solid state. Especially, the conformation of the macrotricyclic polyether was efficiently adjusted by the encapsulated guests, which was to some extent similar to substrate-induced fit of enzymes. Moreover, the binding and releasing of the guests in the complexes could be controlled by potassium ions.

Electrochemical analysis of proton and electron transfer equilibria of the reducible moieties in humic acids.

Humic substances play a key role in biogeochemical and pollutant redox reactions. The objective of this work was to characterize the proton and electron transfer equilibria of the reducible moieties in different humic acids (HA). Cyclic voltammetry experiments demonstrated that diquat and ethylviologen mediated electron transfer between carbon working electrodes and HA. These compounds were used also to facilitate attainment of redox equilibria between redox electrodes and HA in potentiometric E(h) measurements. Bulk electrolysis of HA combined with pH-stat acid titration demonstrated that electron transfer to the reducible moieties in HA also resulted in proton uptake, suggesting decreasing reduction potentials E(h) of HA with increasing pH. This was confirmed by potentiometric E(h)-pH titrations of HA at different redox states. E(h) measurements of HA samples prereduced to different redox states by bulk electrolysis revealed reducible moieties in HA that cover a wide range of apparent standard reduction potentials at pH 7 from E(h)(0)* = +0.15 to -0.3 V. Modeling revealed an overall increase in the relative abundance of reducible moieties with decreasing E(h). The wide range of HA is consistent with its involvement in numerous environmental electron transfer reactions under various redox conditions.

Rapid fluorescence determination of diquat herbicide in food grains using quantum dots as new reducing agent.

CdSe/ZnS QDs have demonstrated capacity to act as reducing agent in organic media such as acetonitrile and ethanol. By using fluorescence and Raman spectroscopy, it has been demonstrated that QDs reduce diquat herbicide to its monocation radical. The reaction is characterized to present a high reaction rate making possible to perform the reaction by simple filtration of the solution containing the herbicide through a QDs modified filter. The monocation radical presents a high fluorescence emission spectrum which was selected as the analytical signal to quantify the diquat herbicide. The method described here for the analysis of diquat herbicide in oat grains is simple and fast allowing the analysis of trace level of herbicide in only 6 min. The excellent sensitivity and reproducibility of the methods indicate that the reaction is favoured from both thermodynamic and kinetic point of view. The results presented open up the possibility to use QDs as redox agent. The sensitivity of the method expressed as detection limit was only of 0.01 mg kg(-1).The lineal range was between 0.05 and 0.5 mg kg(-1). The time of analysis per sample, including extraction, reaction and fluorescent measurement was only of 6 min.

Effect of organic matter and iron oxides on quaternary herbicide sorption-desorption in vineyard-devoted soils.

Herbicide soil/solution distribution coefficients (K(d)) are used in mathematical models to predict the movement of herbicides in soil and groundwater. Herbicides bind to various soil constituents to differing degrees. The universal soil colloid that binds most herbicides is organic matter; however metallic hydrous oxides might also have some influence. The adsorption-desorption of three quaternary ammonium herbicides on soils with different chemical-physical characteristics was determined using a batch equilibration method before and after the following sequential selective dissolution procedures: removal of organic matter, and removal of organic matter plus free iron oxides. The experimentation involved paraquat (PQ), diquat (DQ) and difenzoquat (DFQ) herbicides. The distribution coefficients (K(d)) of the molecules and their correlation to the soil components were determined and a significant negative correlation with organic carbon was highlighted (r<-0.610, p<0.035, n=12). All quats cations experiment high adsorption in the control soils with a Zeta potential at about -21 mV. The order of adsorption on soils (based on K(d)) was the following: PQ>DQ>>DFQ. The adsorption isotherms of these three herbicides on the natural and processed soils were satisfactorily fitted with the Freundlich equation, and a significant correlation with organic carbon was highlighted for quats K(F) (r<-0.696, p<0.012, n=12). The removal of organic matter from soils seems to leave free new adsorption sites for quats on the clay surface, which is no longer occluded by organic matter. This work shows that the amount and nature of the surface that remains available after the removal of single soil constituents is a critical parameter in determining the sorptive behavior of cationic contaminants.

Combined photobacterium toxicity of herbicide mixtures containing one insecticide.

To test whether the dose-addition (DA) model can predict the combined toxicity of the mixtures of herbicides that coexisted with insecticide(s), we selected five herbicides (simetryn, prometon, bromacil, velpar, and diquat) and one organophosphorus insecticide (dichlorvos) as the test components. The inhibition toxicities of the six pesticides as well as those of their mixtures to Vibrio qinghaiensis sp.-Q67 were determined by using the microplate toxicity test procedure. The dose-response curves (DRCs) between the observed inhibition toxicities and the doses of the pesticides or the mixtures were modeled by using the nonlinear least square fitting. It was shown that all dose-response relationships were effectively described by the Weibull function. To fully explore the combined toxicities of mixtures including various concentration compositions, we designed three equivalent-effect concentration ratio (EECR) mixtures and six uniform design concentration ratio (UDCR) mixtures. The combined toxicity of a mixture is identified by inspecting whether the DRC predicted by the dose addition (DA) or independent action (IA) locates in the 95% confidence interval of the DRC of the mixture. Furthermore, the possible reason for the three mixtures to depart from the DA action was the very high concentration ratio of diquat in the mixtures.

Capillary electrophoretic analysis of organic pollutants.

Environmental pollutants comprise a variety of compounds from inorganic anions, cations, ionizable organic compounds and moderately hydrophobic organic compounds to highly hydrophobic organic compounds. Correspondingly different separation strategies are required for their separation. In this chapter, we have presented some methods for the separation and the analysis of the organic pollutants such as polycyclic aromatic hydrocarbons, phenoxy acids, dithiocarbamates, paraquat and diquat, endocrine disruptors, toxins and explosives.

Inclusion complexation of diquat and paraquat by the hosts cucurbit[7]uril and cucurbit[8]uril.

The binding interactions in aqueous solution between the dicationic guest diquat (DQ(2+)) and the cucurbit[7]uril (CB7) and cucurbit[8]uril (CB8) hosts were investigated by (1)H NMR, UV/Vis, and fluorescence spectroscopy; mass spectrometry; single-crystal X-ray diffraction; and electrochemical techniques. The binding data were compared with previously reported results for the related paraquat guest (PQ(2+)). DQ(2+) was found to bind poorly (K=350 m(-1)) inside CB7 and more effectively (K=4.8 x 10(4) m(-1)) inside CB8. One-electron reduction led to increased binding affinity with both hosts (K(r)=1 x 10(4) m(-1) with CB7 and K(r)=6 x 10(5) m(-1) for CB8). While (1)H NMR spectroscopic data revealed that DQ(2+) is not fully included by CB7, the crystal structure of the CB8DQ(2+) complex-obtained from single-crystal X-ray diffraction-clearly establishes its inclusion nature. Overall, both diquat and its one-electron reduced radical cation are bound more effectively by CB8 than by CB7. In contrast to this, paraquat exhibits selectivity for CB7, but its radical cation forms a highly stable dimer inside CB8. These differences highlight the pronounced sensitivity of cucurbit[n]uril hosts to guest features such as charge, charge distribution and shape.

Influence of copper on the adsorption and desorption of paraquat, diquat, and difenzoquat in vineyard acid soils.

Retention of the cationic herbicides paraquat (PQ), diquat (DQ), and difenzoquat (DFQ) in two vineyard soils with a different management history and retention capacity was examined. The influence of copper on the ability of the soils to retain the herbicides was determined by comparing the results of adsorption and desorption tests on untreated and Cu-enriched soil samples, and also on soils that were previously treated with EDTA to extract native copper. The three herbicides were strongly adsorbed by both soils. Soil 1 exhibited linear adsorption isotherms for PQ and DFQ with partition coefficients, KD, of 1.28 x 103 and 1.37 x 103 L kg-1, respectively, and a Freundlich-type isotherm for DQ with a linearized partition coefficient, KD*, of 1.01 x 103 L kg-1. On the other hand, soil 2 exhibited curved isotherms and smaller KD* values (viz. 106, 418, and 28 L kg-1 for PQ, DQ, and DFQ, respectively). Using EDTA to extract copper from the soils released new sites for the herbicides to bind. The three herbicides exhibited strong hysteresis in the adsorption-desorption process. Extracting copper decreased the percent desorption of PQ and DQ; on the other hand, it decreased the affinity of DFQ for the resulting vacant adsorption sites. Similarly, competitive adsorption tests with copper and the herbicides revealed that the metal was only capable of displacing DFQ from adsorption sites. The behavior of this herbicide in the soils was consistent with a specific adsorption model. The disparate behavior of the two soils toward the herbicides was a result of the adsorption sites in soil 1 being less extensively occupied than those of soil 2 in the adsorption tests. The effect of copper on the adsorption of DFQ in the two soils was acceptably reproduced by an adsorption model involving Coulombic and specific sorption with competition from the metal.

Rapid and sensitive HPLC method for the simultaneous determination of paraquat and diquat in human serum.

A rapid and sensitive HPLC method for the simultaneous determination of paraquat and diquat in human serum has been developed. After deproteinization of the serum with 10% trichloroacetic acid, the samples were separated on a reversed-phase column, and subsequently reduced to their radicals with alkaline sodium hydrosulfite solution. These radicals were monitored with a UV detector at 391 nm. This method permitted the reliable quantification of paraquat over linear ranges of 50 ng - 10 microg/ml and 100 ng - 10 microg/ml for diquat in human serum. The within- and between-day variations are lower than 2.3 and 2.2%, respectively. This technique was also utilized to determine the paraquat and diquat serum levels in a patient who had ingested herbicide (Prigrox L) containing paraquat and diquat.

Gas chromatographic-mass spectrometric method for the determination of the herbicides paraquat and diquat in plasma and urine samples.

In the present work, a method was developed and optimized aiming to determinate the herbicides paraquat (PQ) and diquat (DQ) in human plasma and urine samples. An initial procedure of chemical reduction of the analytes by adding NaBH4 directly in the buffered samples (pH 8.0) was performed. This procedure was necessary to convert the quaternary ammonium substances into more volatile compounds for gas chromatographic analysis. The reduction compounds were extracted with C18 cartridges (solid-phase extraction). Ethyl paraquat (EPQ) was used as internal standard (IS). Gas chromatography-mass spectrometry (GC-MS) was used to identify and quantify the analytes in selected ion monitoring (SIM) mode. The limits of detection were 0.05 mg/l for both PQ and DQ. By using the weighted least squares linear regression (1/x1/2 for plasma and 1/y for urine), the accuracy of the analytical method was improved at the lower end of the calibration curve (from 0.1 to 50 mg/l; r>0.98). This method can be readily utilized as an important tool to confirm the suspicion of PQ and/or DQ poisoning and evaluate the extent of the intoxication.

Bis(meta-phenylene)-32-crown-10-based cryptand/diquat inclusion [2]complexes.

Bis(meta-phenylene)-32-crown-10-based cryptands have been proved to complex diquat much more strongly than bis(meta-phenylene)-32-crown-10 itself; in fact, one containing a pyridyl moiety has one of the highest Ka values yet reported.