The effect of bolus properties on muscle activation patterns and TMJ loading during unilateral chewing.

Mastication is a vital human function and uses an intricate coordination of muscle activation to break down food. Collection of detailed muscle activation patterns is complex and commonly only masseter and anterior temporalis muscle activation are recorded. Chewing is the orofacial task with the highest muscle forces, potentially leading to high temporomandibular joint (TMJ) loading. Increased TMJ loading is often associated with the onset and progression of temporomandibular disorders (TMD). Hence, studying TMJ mechanical stress during mastication is a central task. Current TMD self-management guidelines suggest eating small and soft pieces of food, but patient safety concerns inhibit in vivo investigations of TMJ biomechanics and currently no in silico model of muscle recruitment and TMJ biomechanics during chewing exists. For this purpose, we have developed a state-of-the-art in silico model, combining rigid body bones, finite element TMJ discs and line actuator muscles. To solve the problems regarding muscle activation measurement, we used a forward dynamics tracking approach, optimizing muscle activations driven by mandibular motion. We include a total of 256 different combinations of food bolus size, stiffness and position in our study and report kinematics, muscle activation patterns and TMJ disc von Mises stress. Computed mandibular kinematics agree well with previous measurements. The computed muscle activation pattern stayed stable over all simulations, with changes to the magnitude relative to stiffness and size of the bolus. Our biomedical simulation results agree with the clinical guidelines regarding bolus modifications as smaller and softer food boluses lead to less TMJ loading. The computed mechanical stress results help to strengthen the confidence in TMD self-management recommendations of eating soft and small pieces of food to reduce TMJ pain.

Experimental study of eigenstrains in temporomandibular joint discs using digital image analysis.

The temporomandibular joint is one of the most frequently used joints of the human body. Its malfunction can severely influence patient's well-being. Since the temporomandibular joint disc plays a major role in its functioning, especially in load distribution within the joint, it appears to be a crucial element to understand. This paper aims to improve understanding of the tissues within close in vivo conditions (i.e. hydrated at 37 ° C) by (i) comforting literature by revealing the presence of residual stresses within the temporomandibular joint disc, (ii) quantifying eigenstrains through a relaxation process and finally (iii) evaluating the internal mechanical state in intact temporomandibular joint discs central part, considering the tissue as a thin layer. Both global specimen size measurements and local digital image correlation were used to quantify 6 samples' deformation through a detailed analysis of approximately 30 images, recorded for approximately one hour, per disc. Thanks to a backward time approach combined to an analytical model, eigenstrains were assessed on discs. For the first time, the presence of complex initial strain fields within cylindrical specimens of porcine temporomandibular joint discs was quantified, confirming indications from literature. Digital image analysis revealed the partial internal stress release through specimen self-deformation. Close to zero in central part, it reached approximately 13% radial strain in the outer ring within a characteristic relaxation time close to 530s. The principal strains' distribution agrees with the alignment of the collagen fibers in the central part of the discs revealed in many works. It led to deduce that, in the central area of the discs, the matrix undergoes a radial compression within physiological conditions to compensate the daily loading stresses. Therefore, this work improves understanding of the tissues in vivo conditions highlighting extraction cut effect on temporomandibular joint disc's tissues mechanical state.

Decellularized small intestine submucosa device for temporomandibular joint meniscus repair: Acute timepoint safety study.

Temporomandibular joint (TMJ) Meniscus removal is an option for the patient to regain full range of motion if the disc is irreversibly damaged or unable to be reduced. However, this procedure leaves the joint vulnerable to condylar remodeling and degeneration. We have shown that extracellular matrix (ECM) scaffolds remodel into a tissue with near native TMJ meniscus in previous studies. The next step towards clinical translation is to manufacture the ECM scaffold as a device under good manufacturing practices (GMP) and test it in a pre-clinical animal study under good laboratory practices (GLP). The primary objective of this study was to evaluate the in-vivo histopathological response to a Prototype GMP manufactured device made of decellularized porcine small intestinal submucosa (SIS), by observing for signs of surrounding tissue reaction to the device that are indicative of an adverse host response in comparison to an empty control at 21 days post-surgical implantation in a canine TMJ meniscus removal and implant model in a GLP setting. The conclusive findings were that the ECM device is safe for placement in the TMJ. After 21 days post implantation, histology of tissue surrounding the device and draining lymph nodes showed that the Prototype GMP device had no negative effects compared to the empty site (as evaluated by the board-certified veterinary pathologist). Furthermore, there was a lack of negative findings for clinical pathology (hematology and clinical chemistry), mortality, and body weight/weight change. Future studies will go to one year after implantation to show that the remodel device remains as a viable tissue with near native mechanical properties.

A randomized controlled preclinical trial on 3 interposal temporomandibular joint disc implants: TEMPOJIMS-Phase 2.

The effort to develop an effective and safe temporomandibular joint (TMJ) disc substitute has been one of the mainstreams of tissue engineering. Biodegradable customized scaffolds could approach safety and effectiveness to regenerate a new autologous disc, rather than using non-biodegradable materials. However, it is still technically challenging to mimic the biomechanical properties of the native disc with biodegradable polymers. In this study, new 3D tailored TMJ disc implants were developed: (1) Poly(glycerol sebacate) (PGS) scaffold reinforced with electrospun Poly(εcaprolactone) (PCL) fibers on the outer surface (PGS+PCL); (2) PCL and polyethylene glycol diacrylate (PEGDA) (PCL+PEGDA); and (3) PCL. The TMJ implants were tested in a randomized preclinical trial, conducted in 24 black Merino sheep TMJ, perfoming bilateral interventions. Histologic, imaging, and kinematics analysis was performed. No statistical changes were observed between the PGS+PCL disc and the control group. The PCL+PEGDA and PCL groups were associated with statistical changes in histology (p = 0.004 for articular cartilage mid-layer; p = 0.019 for structure changes and p = 0.017 for cell shape changes), imaging (p = 0.027 for global appreciation) and dangerous material fragmentation was observed. No biomaterial particles were observed in the multi-organ analysis in the different groups. The sheep confirmed to be a relevant animal model for TMJ disc surgery and regenerative approaches. The PCL and PCL+PEGDA discs presented a higher risk to increase degenerative changes, due to material fragmentation. None of the tested discs regenerate a new autologous disc, however, PGS+PCL was safe, demonstrated rapid resorption, and was capable to prevent condyle degenerative changes.

Using deep learning to predict temporomandibular joint disc perforation based on magnetic resonance imaging.

The goal of this study was to develop a deep learning-based algorithm to predict temporomandibular joint (TMJ) disc perforation based on the findings of magnetic resonance imaging (MRI) and to validate its performance through comparison with previously reported results. The study objects were obtained by reviewing medical records from January 2005 to June 2018. 299 joints from 289 patients were divided into perforated and non-perforated groups based on the existence of disc perforation confirmed during surgery. Experienced observers interpreted the TMJ MRI images to extract features. Data containing those features were applied to build and validate prediction models using random forest and multilayer perceptron (MLP) techniques, the latter using the Keras framework, a recent deep learning architecture. The area under the receiver operating characteristic (ROC) curve (AUC) was used to compare the performances of the models. MLP produced the best performance (AUC 0.940), followed by random forest (AUC 0.918) and disc shape alone (AUC 0.791). The MLP and random forest were also superior to previously reported results using MRI (AUC 0.808) and MRI-based nomogram (AUC 0.889). Implementing deep learning showed superior performance in predicting disc perforation in TMJ compared to conventional methods and previous reports.

The dynamic mechanical viscoelastic properties of the temporomandibular joint disc: The role of collagen and elastin fibers from a perspective of polymer dynamics.

The temporomandibular joint disc is a structure, characterized as heterogeneous fibrocartilage, and is composed of macromolecular biopolymers. Despite a large body of characterization studies, the contribution of matrix biopolymers on the dynamic viscoelastic behavior of the disc is poorly understood. Given the high permeability and low concentration of glycosaminoglycans in the disc, it has been suggested that poro-elastic behavior can be neglected and that the intrinsic viscoelastic nature of solid matrix plays a dominant role in governing its time-dependent behavior. This study attempts to quantify the contribution of collagen and elastin fibers to the viscoelastic properties of the disc. Using collagenase and elastase, we perturbed the collagen and elastin fibrillar network in porcine temporomandibular joint discs and investigated the changes of dynamic viscoelastic properties in five different regions of the disc. Following both treatments, the storage and loss moduli of these regions were reduced dramatically up to the point that the tissue was no longer mechanically heterogeneous. However, the proportion of changes in storage and loss moduli were different for each treatment, reflected in the decrease and increase of the loss tangent for collagenase and elastase treated discs, respectively. The reduction of storage and loss moduli of the disc correlated with a decrease of biopolymer length. The present study indicates that the compositional and structural changes of collagen and elastin fibers alter the viscoelastic properties of the disc consistent with polymer dynamics.

Approaches to improve integration and regeneration of an ex vivo derived temporomandibular joint disc scaffold with variable matrix composition.

Due to their natural biochemical and biomechanical characteristics, using ex vivo tissues as platforms for guided tissue regeneration has become widely accepted, however subsequent attachment and integration of these constructs in vivo is often overlooked. A decellularized porcine temporomandibular joint (TMJ) disc has shown promise as a scaffold to guide disc regeneration and preliminary work has shown the efficacy of surfactant (SDS) treatment within the fibrocartilaginous disc to remove cellular components. The majority of studies focus on the intermediate region of the disc (or disc proper). Using this approach, inherent attachment tissues can be maintained to improve construct stability and integration within the joint. Unlike human disc attachment tissue, the porcine attachment tissues have high lipid content which would require a different processing approach to remove immunogenic components. In order to examine the effect of delipidation on the attachment tissue properties, SDS and two organic solvent mixtures (acetone/ethanol and chloroform/methanol) were compared. Lipid and cellular solubilization, ECM alteration, and seeded human mesenchymal stem cell (MSC) morphology and viability were assessed. Quantitative analysis showed SDS treatments did not effectively delipidate the attachment tissues and cytotoxicity was noted toward MSC in these regions. Acetone/ethanol removed cellular material but not all lipids, while chloroform/methanol removed all visible lipid deposits but residual porcine cells were observed in histological sections. When a combination of approaches was used, no residual lipid or cytotoxicity was noted. Preparing a whole TMJ graft with a combined approach has the potential to improve disc integration within the native joint environment.

Human jaw joint hypermobility: Diagnosis and biomechanical modelling.

Patients with hypermobility disorders of the jaw joint experience joint sounds and jerky movements of the jaw. In severe cases, a subluxation or luxation can occur. Clinically, hypermobility disorders should be differentiated from disc displacements. With biomechanical modelling, we previously identified the anterior slope angle of the eminence and the orientation of the jaw closers to potentially contribute to hypermobility disorders. Using cone-beam computed tomography (CBCT), we constructed patient-specific models of the masticatory system to incorporate these aspects. It is not known whether the clinical diagnosis of hypermobility disorders is associated with the prediction of hypermobility by a patient-specific biomechanical model. Fifteen patients and eleven controls, matched for gender and age, were enrolled in the study. Clinical diagnosis was performed according to the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) and additional testing to differentiate hypermobility from disc displacements. Forward simulations with patient-specific biomechanical models were performed for maximum opening and subsequent closing of the jaw. This predicted a hypermobility disorder (luxation) or a control (normal closing). We found no association between the clinical diagnosis and predictions of hypermobility disorders. The biomechanical models overestimated the number of patients, yielding a low specificity. The role of the collagenous structures remains unclear; therefore, the articular disc and the ligaments should be modelled in greater detail. This also holds for the fanned shape of the temporalis muscle. However, for the osseous structures, we determined post hoc that the anterior slope angle of the articular eminence is steeper in patients than in controls.

Part I: Development and Physiology of the Temporomandibular Joint.

PURPOSE OF REVIEW: Investigate the developmental physiology of the temporomandibular joint (TMJ), a unique articulation between the cranium and the mandible. RECENT FINDINGS: Principal regulatory factors for TMJ and disc development are Indian hedgehog (IHH) and bone morphogenetic protein (BMP-2). The mechanism is closely associated with ear morphogenesis. Secondary condylar cartilage emerges as a subperiosteal blastema on the medial surface of the posterior mandible. The condylar articular surface is immunoreactive for tenascin-C, so it is a modified fibrous periosteum with an underlying proliferative zone (cambrium layer) that differentiates into fibrocartilage. The latter cushions high loads and subsequently produces endochondral bone. The TMJ is a heavily loaded joint with three cushioning layers of fibrocartilage in the disc, as well as in subarticular zones in the fossa and mandibular condyle. The periosteal articular surface produces fibrocartilage to resist heavy loads, and has unique healing and adaptive properties for maintaining life support functions under adverse environmental conditions.

Fibro/chondrogenic differentiation of dental stem cells into chitosan/alginate scaffolds towards temporomandibular joint disc regeneration.

Tissue engineering (TE) may provide effective alternative treatment for challenging temporomandibular joint (TMJ) pathologies associated with disc malpositioning or degeneration and leading to severe masticatory dysfunction. Aim of this study was to evaluate the potential of chitosan/alginate (Ch/Alg) scaffolds to promote fibro/chondrogenic differentiation of dental pulp stem cells (DPSCs) and production of fibrocartilage tissue, serving as a replacement of the natural TMJ disc. Ch/Alg scaffolds were fabricated by crosslinking with CaCl2 combined or not with glutaraldehyde, resulting in two scaffold types that were physicochemically characterized, seeded with DPSCs or human nucleus pulposus cells (hNPCs) used as control and evaluated for cell attachment, viability, and proliferation. The DPSCs/scaffold constructs were incubated for up to 8 weeks and assessed for extracellular matrix production by means of histology, immunofluorescence, and thermomechanical analysis. Both Ch/Alg scaffold types with a mass ratio of 1:1 presented a gel-like structure with interconnected pores. Scaffolds supported cell adhesion and long-term viability/proliferation of DPSCs and hNPCs. DPSCs cultured into Ch/Alg scaffolds demonstrated a significant increase of gene expression of fibrocartilaginous markers (COLI, COL X, SOX9, COM, ACAN) after up to 3 weeks in culture. Dynamic thermomechanical analysis revealed that scaffolds loaded with DPSCs significantly increased storage modulus and elastic response compared to cell-free scaffolds, obtaining values similar to those of native TMJ disc. Histological data and immunochemical staining for aggrecan after 4 to 8 weeks indicated that the scaffolds support abundant fibrocartilaginous tissue formation, thus providing a promising strategy for TMJ disc TE-based replacement.

Diagnosis of disk displacement using real-time MRI: Clinical report of two patients.

The clinical application of real-time magnetic resonance imaging (MRI) for the diagnosis of temporomandibular joint disk displacement (DD) with and without reduction is presented. In 2 patients with presumed DD, real-time MRI at 15 frames per second was performed during the natural opening and closing of the mouth. In one patient unilateral DD with reduction and in the other patient bilateral DD without reduction were observed. In contrast with conventional static MRI, real-time MRI moving images of temporomandibular joint DD offer comprehensive information about the dynamics of all involved structures, which in turn promises more reliable diagnoses. Real-time MRI is more rapid, more reliable, more informative, and less stressful for patients with temporomandibular disorders (TMDs).

Electrical Conductivity Method to Determine Sexual Dimorphisms in Human Temporomandibular Disc Fixed Charge Density.

To investigate potential mechanisms associated with the increased prevalence of temporomandibular joint (TMJ) disorders among women, the study objective was to determine sex-dependent and region-dependent differences in fixed charge density (FCD) using an electrical conductivity method. Seventeen TMJ discs were harvested from nine males (77 ± 4 years) and eight females (86 ± 4 years). Specimens were prepared from the anterior band, posterior band, intermediate zone, medial disc and lateral disc. FCD was determined using an electrical conductivity method, assessing differences among disc regions and between sexes. Statistical modeling showed significant effects for donor sex (p = 0.002), with cross-region FCD for male discs 0.051 ± 0.018 milliequivalent moles per gram (mEq/g) wet tissue and 0.043 ± 0.020 mEq/g wet tissue for female discs. FCD was significantly higher for male discs compared to female discs in the posterior band, with FCD 0.063 ± 0.015 mEq/g wet tissue for male discs and 0.032 ± 0.020 mEq/g wet tissue for female discs (p = 0.050). These results indicate FCD contributes approximately 20% towards TMJ disc compressive modulus, through osmotic swelling pressure regulation. Additionally, FCD regulates critical extracellular ionic/osmotic and nutrient environments. Sexual dimorphisms in TMJ disc FCD, and resulting differences in extracellular ionic/osmotic and nutrient environments, could result in altered mechano-electro-chemical environments between males and females and requires further study.

Distribution of stress on TMJ disc induced by use of chincup therapy: assessment by the finite element method.

OBJECTIVE: To assess the distribution of stress produced on TMJ disc by chincup therapy, by means of the finite element method. METHODS: a simplified three-dimensional TMJ disc model was developed by using Rhinoceros 3D software, and exported to ANSYS software. A 4.9N load was applied on the inferior surface of the model at inclinations of 30, 40, and 50 degrees to the mandibular plane (GoMe). ANSYS was used to analyze stress distribution on the TMJ disc for the different angulations, by means of finite element method. RESULTS: The results showed that the tensile and compressive stresses concentrations were higher on the inferior surface of the model. More presence of tensile stress was found in the middle-anterior region of the model and its location was not altered in the three directions of load application. There was more presence of compressive stress in the middle and mid-posterior regions, but when a 50o inclined load was applied, concentration in the middle region was prevalent. Tensile and compressive stresses intensities progressively diminished as the load was more vertically applied. CONCLUSIONS: stress induced by the chincup therapy is mainly located on the inferior surface of the model. Loads at greater angles to the mandibular plane produced distribution of stresses with lower intensity and a concentration of compressive stresses in the middle region. The simplified three-dimensional model proved useful for assessing the distribution of stresses on the TMJ disc induced by the chincup therapy.

Distribution of stress on TMJ disc induced by use of chincup therapy: assessment by the finite element method

ABSTRACT Objective: To assess the distribution of stress produced on TMJ disc by chincup therapy, by means of the finite element method. Methods: a simplified three-dimensional TMJ disc model was developed by using Rhinoceros 3D software, and exported to ANSYS software. A 4.9N load was applied on the inferior surface of the model at inclinations of 30, 40, and 50 degrees to the mandibular plane (GoMe). ANSYS was used to analyze stress distribution on the TMJ disc for the different angulations, by means of finite element method. Results: The results showed that the tensile and compressive stresses concentrations were higher on the inferior surface of the model. More presence of tensile stress was found in the middle-anterior region of the model and its location was not altered in the three directions of load application. There was more presence of compressive stress in the middle and mid-posterior regions, but when a 50o inclined load was applied, concentration in the middle region was prevalent. Tensile and compressive stresses intensities progressively diminished as the load was more vertically applied. Conclusions: stress induced by the chincup therapy is mainly located on the inferior surface of the model. Loads at greater angles to the mandibular plane produced distribution of stresses with lower intensity and a concentration of compressive stresses in the middle region. The simplified three-dimensional model proved useful for assessing the distribution of stresses on the TMJ disc induced by the chincup therapy.

RESUMO Objetivo: avaliar, por meio do método dos elementos finitos, a distribuição das tensões no disco articular produzidas pela mentoneira ortopédica. Métodos: um modelo tridimensional simplificado do disco articular foi desenvolvido com o software Rhinoceros 3D e exportado para o software ANSYS. Uma carga de 4,9 N (500 gf) foi aplicada na superfície inferior do modelo, com inclinação de 30, 40 e 50o em relação ao plano mandibular Gônio-Mentoniano (GoMe). O ANSYS analisou, por meio do método dos elementos finitos, a distribuição das tensões presentes no modelo do disco articular para as diferentes angulações. Resultados: os resultados mostraram que a concentração das tensões de tração e compressão foi maior na superfície inferior do modelo. A tensão de tração foi mais presente na região média-anterior do modelo, e sua localização não se alterou nas três direções da aplicação da carga. A tensão de compressão foi mais presente nas regiões média e média-posterior do modelo, mas quando a carga a 50o foi aplicada, ela se concentrou na região média. As intensidades das tensões de tração e compressão diminuíram progressivamente à medida que a carga foi aplicada mais verticalmente. Conclusão: as tensões induzidas pela mentoneira ortopédica se localizaram principalmente na superfície inferior do modelo. As cargas com maior angulação em relação ao plano mandibular produziram uma distribuição de tensões com menor intensidade e uma concentração da tensão de compressão na região média do modelo. Um modelo tridimensional simplificado se mostrou útil na avaliação da distribuição das tensões no disco articular induzidas pela mentoneira ortopédica.

Fluid pressurization and tractional forces during TMJ disc loading: A biphasic finite element analysis.

OBJECTIVES: To investigate the ploughing mechanism associated with tractional force formation on the temporomandibular joint (TMJ) disc surface. SETTING AND SAMPLE POPULATION: Ten left TMJ discs were harvested from 6- to 8-month-old male Yorkshire pigs. MATERIALS AND METHODS: Confined compression tests characterized mechanical TMJ disc properties, which were incorporated into a biphasic finite element model (FEM). The FEM was established to investigate load carriage within the extracellular matrix (ECM) and the ploughing mechanism during tractional force formation by simulating previous in vitro plough experiments. RESULTS: Biphasic mechanical properties were determined in five TMJ disc regions (average±standard deviation for aggregate modulus: 0.077±0.040 MPa; hydraulic permeability: 0.88±0.37×10-3 mm4 /Ns). FE simulation results demonstrated that interstitial fluid pressurization is a dominant loading support mechanism in the TMJ disc. Increased contact load and duration led to increased solid ECM strain and stress within, and increased ploughing force on the surface of the disc. CONCLUSION: Sustained mechanical loading may play a role in load carriage within the ECM and ploughing force formation during stress-field translation at the condyle-disc interface. This study further elucidated the mechanism of ploughing on tractional force formation and provided a baseline for future analysis of TMJ mechanics, cartilage fatigue and early TMJ degeneration.

Structure-Function Relationships of Temporomandibular Retrodiscal Tissue.

It is estimated that 2% to 4% of the US population will seek treatment for temporomandibular joint (TMJ) symptoms, typically occurring with anterior disc displacement. The temporomandibular retrodiscal tissue (RDT) has been postulated to restrict pathologic disc displacement. To elucidate RDT function, understanding regional RDT biomechanics and ultrastructure is required. No prior biomechanical analysis has determined regional variations in RDT properties or associated biomechanical outcomes with regional variations in collagen and elastin organization. The purpose of this study was to determine direction- and region-dependent tensile biomechanical characteristics and regional fibrillar arrangement of porcine RDT. Incremental stress relaxation experiments were performed on 20 porcine RDT specimens, with strain increments from 5% to 50%, a ramp-strain rate of 2% per second, and relaxation periods of 2.5 min. Tensile characteristics were determined between temporal and condylar regions and anteroposterior and mediolateral directions. RDT preparations were imaged using second-harmonic generation (SHG) microscopy for both collagen and elastin. Young's modulus showed significant differences by region ( P < 0.001) and strain ( P < 0.001). Young's modulus was <1 MPa from 5% to 20% strain, before increasing from 20% to 50% strain to a maximum of 2.9 MPa. Young's modulus trended higher in the temporal region and mediolateral direction. Instantaneous and relaxed moduli showed no significant difference by region or direction. Collagen arrangement was most organized near the disc boundary, with disorganization increasing posteriorly. Elastin was present at the disc boundary and RDT mid-body. Porcine RDT demonstrated region- and strain-dependent variations in tensile moduli, associated with regional differences in collagen and elastin. The small tensile moduli suggest that the RDT is not resistive to pathologic disc displacement. Further biomechanical analysis of the RDT is required to fully define RDT functional roles. Understanding regional variations in tissue stiffness and ultrastructure for TMJ components is critical to understanding joint function and for the long-term goal of improving TMJ disorder treatment strategies.

Effect of freezing storage time on the elastic and viscous properties of the porcine TMJ disc.

The correct characterisation of the articular disc of the temporomandibular joint (TMJ) is key to study the masticatory biomechanics. For the interval from extraction until testing, freezing is the most used preservation technique for biological tissues, but its influence on their behaviour is still unclear. An important error can be committed in the characterisation of such tissues if freezing has any effect on their mechanical properties. Thus, the aim of this study was to determine whether the freezing storage time causes any change in the mechanical properties of the TMJ discs. To check that, the specimens were stored in a -20°C freezer during different time intervals: 1 day, 1 week, 1 month and 3 months. Fresh specimens, tested right after extraction, were used as the control group. Compressive stress relaxation tests were carried out on the specimens and a quasi-linear viscoelastic (QLV) model was used to fit the experimental curves. A statistical analysis detected significant differences among the groups. Post-hoc tests determined that freezing the specimens more than 30 days may lead to changes in the viscoelastic properties of the tissue.

TMJ energy densities in healthy men and women.

OBJECTIVE: Cartilage fatigue, due to mechanical work, may account for the early development of degenerative joint disease (DJD) in the temporomandibular joint (TMJ), and why women are three times more likely to be afflicted. This study tested for gender differences in mechanical energy densities in women and men with healthy TMJs. DESIGN: Eighteen women and eighteen men gave informed consent. Research diagnostic criteria including imaging were used to ensure that subjects' TMJs were normal, without disc displacement or signs of DJD. Numerical modeling determined TMJ loads (Fnormal). Jaw tracking and three-dimensional dynamic stereometry characterized individual-specific data of stress-field dynamic mechanics during 10 symmetrical jaw closing cycles. These data were used to estimate tractional forces (Ftraction). Energy densities were then calculated, where: Energy Density = W/Q (W = work done or mechanical energy input = Ftraction*distance of stress-field translation, Q = volume of cartilage). Two-way analysis of variance (ANOVA) and follow-up two-group comparisons tested mean energy densities for ipsilateral and contralateral TMJs in women vs men. RESULTS: Mean energy densities ± standard deviations in ipsilateral and contralateral TMJs in women were 9.0 ± 9.7 and 8.4 ± 5.5 mJ/mm3, respectively, and were significantly larger (P = 0.004 and 0.001, respectively) compared to ipsilateral and contralateral TMJs in men, which were 5.6 ± 4.2 and 6.3 ± 4.2 mJ/mm3, respectively. CONCLUSIONS: Energy densities were significantly larger in healthy TMJs of women than men. Larger TMJ energy densities during normal jaw functions could predispose earlier mechanical fatigue of the TMJ disc.

Tensile biomechanical properties of human temporomandibular joint disc: Effects of direction, region and sex.

Approximately 30% of temporomandibular joint (TMJ) disorders include degenerative changes to the articular disc, with sex-specific differences in prevalence and severity. Limited tensile biomechanical properties of human TMJ discs have been reported. Stress relaxation tests were conducted on TMJ disc specimens harvested bilaterally from six males and six females (68.9±7.9 years), with step-strain increments of 5%, 10%, 15%, 20% and 30%, at 1% strain-per-second. Stress versus strain plots were constructed, and Young׳s Modulus, Instantaneous Modulus and Relaxed Modulus were determined. The effects of direction, region, and sex were examined. Regional effects were significant (p<0.01) for Young׳s Modulus and Instantaneous Modulus. Anteroposteriorly, the central region was significantly stiffer than medial and lateral regions. Mediolaterally, the posterior region was significantly stiffer than central and anterior regions. In the central region, anteroposteriorly directed specimens were significantly stiffer compared to mediolateral specimens (p<0.04). TMJ disc stiffness, indicated by Young׳s Modulus and Instantaneous Modulus, was higher in directions corresponding to high fiber alignment. Additionally, human TMJ discs were stiffer for females compared to males, with higher Young׳s Modulus and Instantaneous Modulus, and female TMJ discs relaxed less. However, sex effects were not statistically significant. Using second-harmonic generation microscopy, regional collagen fiber organization was identified as a potentially significant factor in determining the biomechanical properties for any combination of direction and region. These findings establish structure-function relationships between collagen fiber direction and organization with biomechanical response to tensile loading, and may provide insights into the prevalence of TMJ disorders among women.

Impact of functional mandibular advancement appliances on the temporomandibular joint - a systematic review

BACKGROUND: Although many orthodontists have no doubts about the effectiveness of functional appliances for mandibular advancement, the impact on the temporomandibular joint (TMJ) is still in dispute. The objective of this systematic review is to examine the main effects on the TMJ of using functional appliances, both in healthy patients and in patients with a pre-existing disorder. MATERIAL AND METHODS: A systematic review of the literature was conducted in accordance with the PRISMA guidelines. Only systematic reviews, meta-analyses, randomized clinical trials (RCTs), case-control studies and cohort studies were included. A detailed language-independent electronic search was conducted in the Pubmed, Scopus, Cochrane Library and Embase databases. All studies published between 2000 and 2015 were included. RESULTS: A total of 401 articles were identified. Of these, 159 were duplicates and were excluded. On reading the title and abstract, 213 articles were excluded because they did not answer the research question, leaving a total of 29 articles. These articles were read and assessed. Following critical reading of the full text, eight articles were excluded: seven because they were considered of low quality and one because it published redundant data. As a result, 21 articles were included. CONCLUSIONS: After treatment with functional appliances, the condyle was found to be in a more advanced position, with remodelling of the condyle and adaptation of the morphology of the glenoid fossa. No significant adverse effects on the TMJ were observed in healthy patients and the appliances could improve joints that initially presented forward dislocation of the disk