Refining the rheological characteristics of high drug loading ointment via SDS and machine learning.

This paper presents an optimized preparation process for external ointment using the Definitive Screening Design (DSD) method. The ointment is a Traditional Chinese Medicine (TCM) formula developed by Professor WYH, a renowned TCM practitioner in Jiangsu Province, China, known for its proven clinical efficacy. In this study, a stepwise regression model was employed to analyze the relationship between key process factors (such as mixing speed and time) and rheological parameters. Machine learning techniques, including Monte Carlo simulation, decision tree analysis, and Gaussian process, were used for parameter optimization. Through rigorous experimentation and verification, we have successfully identified the optimal preparation process for WYH ointment. The optimized parameters included drug ratio of 24.5%, mixing time of 8 min, mixing speed of 1175 rpm, petroleum dosage of 79 g, liquid paraffin dosage of 6.7 g. The final ointment formulation was prepared using method B. This research not only contributes to the optimization of the WYH ointment preparation process but also provides valuable insights and practical guidance for designing the preparation processes of other TCM ointments. This advanced DSD method enhances the screening approach for identifying the best preparation process, thereby improving the scientific rigor and quality of TCM ointment preparation processes.

Production, characterization, and application of Pseudoxanthomonas taiwanensis biosurfactant: a green chemical for microbial enhanced oil recovery (MEOR).

Biosurfactants, as microbial bioproducts, have significant potential in the field of microbial enhanced oil recovery (MEOR). Biosurfactants are microbial bioproducts with the potential to reduce the interfacial tension (IFT) between crude oil and water, thus enhancing oil recovery. This study aims to investigate the production and characterization of biosurfactants and evaluate their effectiveness in increasing oil recovery. Pseudoxanthomonas taiwanensis was cultured on SMSS medium to produce biosurfactants. Crude oil was found to be the most effective carbon source for biosurfactant production. The biosurfactants exhibited comparable activity to sodium dodecyl sulfate (SDS) at a concentration of 400 ppm in reducing IFT. It was characterized as glycolipids, showing stability in emulsions at high temperatures (up to 120 °C), pH levels ranging from 3 to 9, and NaCl concentrations up to 10% (w/v). Response surface methodology revealed the optimized conditions for the most stable biosurfactants (pH 7, temperature of 40 °C, and salinity of 2%), resulting in an EI24 value of 64.45%. Experimental evaluations included sand pack column and core flooding studies, which demonstrated additional oil recovery of 36.04% and 12.92%, respectively. These results indicate the potential application of P. taiwanensis biosurfactants as sustainable and environmentally friendly approaches to enhance oil recovery in MEOR processes.

Probability Density Functional Method of Enzyme Effect on Denatured Protein Soil.

Protein soils must be removed for both appearance and hygienic reasons. They are denatured by heat treatment or bleaching and cleaned using enzymes. Among the various types of protein soils, blood soils are the most noticeable and known to be denatured by heat and bleaching by oxidation. We verified herein that the detergency of heat and oxidatively denatured hemoglobin is greatly improved by the enzyme immersing treatment in the detergency with SDS and can be analyzed using the probability density functional method. The probability density functional method evaluates the cleaning power by assuming that the adhesion and cleaning force of soils are not uniquely determined, but instead have a distribution in intensity, with a usefulness that had recently been demonstrated. This analytical method showed that the cleaning power of the enzyme immersing treatment improved when the soil adhesive force was decreased due to denatured protein degradation, even though the cleaning power of the SDS remained unchanged, and the values were consistent with those in the cleaning test. In conclusion, the probability density functional method can be used to analyze enzymatic degradation of denatured protein soils and the resulting changes in their detergency.

Construction of dental pulp decellularized matrix by cyclic lavation combined with mechanical stirring and its proteomic analysis.

The decellularized matrix has a great potential for tissue remodeling and regeneration; however, decellularization could induce host immune rejection due to incomplete cell removal or detergent residues, thereby posing significant challenges for its clinical application. Therefore, the selection of an appropriate detergent concentration, further optimization of tissue decellularization technique, increased of biosafety in decellularized tissues, and reduction of tissue damage during the decellularization procedures are pivotal issues that need to be investigated. In this study, we tested several conditions and determined that 0.1% Sodium dodecyl sulfate and three decellularization cycles were the optimal conditions for decellularization of pulp tissue. Decellularization efficiency was calculated and the preparation protocol for dental pulp decellularization matrix (DPDM) was further optimized. To characterize the optimized DPDM, the microstructure, odontogenesis-related protein and fiber content were evaluated. Our results showed that the properties of optimized DPDM were superior to those of the non-optimized matrix. We also performed the 4D-Label-free quantitative proteomic analysis of DPDM and demonstrated the preservation of proteins from the natural pulp. This study provides a optimized protocol for the potential application of DPDM in pulp regeneration.

Surfactant-based supramolecular dye assembly: A highly selective and economically viable platform for quantification of heparin antidote.

Herein, we have employed a supramolecular assembly of a cationic dye, LDS-698 and a common surfactant sodium dodecyl sulfate (SDS) as a turn-on fluorescent sensor for protamine (Pr) detection. Addition of cationic Pr to the solution of dye-surfactant complex brings negatively charged SDS molecules together through strong electrostatic interaction, assisting aggregation of SDS way before its critical micellar concentration (CMC). These aggregates encapsulate the dye molecules within their hydrophobic region, arresting non-radiative decay channels of the excited dye. Thus, the LDS-698•SDS assembly displays substantial enhancement in fluorescence intensity that follows a nice linear trend with Pr concentration, providing limit of detection (LOD) for Pr as low as 3.84(±0.11) nM in buffer, 124.4(±6.7) nM in 1% human serum and 28.3(±0.5) nM in 100% human urine. Furthermore, high selectivity, low background signal, large stokes shift, and emission in the biologically favorable deep-red region make the studied assembly a promising platform for Pr sensing. As of our knowledge it is the first ever Pr sensory platform, using a very common surfactant (SDS), which is economically affordable and very easily available in the market. This innovative approach can replace the expensive, exotic and specialized chemicals considered for the purpose and thus showcase its potential in practical applications.

Decellularized tissue exhibits large differences of extracellular matrix properties dependent on decellularization method: novel insights from a standardized characterization on skeletal muscle.

Decellularized matrices are an attractive choice of scaffold in regenerative medicine as they can provide the necessary extracellular matrix (ECM) components, signals and mechanical properties. Various detergent-based protocols have already been proposed for decellularization of skeletal muscle tissue. However, a proper comparison is difficult due to differences in species, muscle origin and sample sizes. Moreover, a thorough evaluation of the remaining acellular matrix is often lacking. We compared an in-house developed decellularization protocol to four previously published methods in a standardized manner. Porcine skeletal muscle samples with uniform thickness were subjected to in-depth histological, ultrastructural, biochemical and biomechanical analysis. In addition, 2D and three-dimensional cytocompatibility experiments were performed. We found that the decellularization methods had a differential effect on the properties of the resulting acellular matrices. Sodium deoxycholate combined with deoxyribonuclease I was not an effective method for decellularizing thick skeletal muscle tissue. Triton X-100 in combination with trypsin, on the other hand, removed nuclear material but not cytoplasmic proteins at low concentrations. Moreover, it led to significant alterations in the biomechanical properties. Finally, sodium dodecyl sulphate (SDS) seemed most promising, resulting in a drastic decrease in DNA content without major effects on the ECM composition and biomechanical properties. Moreover, cell attachment and metabolic activity were also found to be the highest on samples decellularized with SDS. Through a newly proposed standardized analysis, we provide a comprehensive understanding of the impact of different decellularizing agents on the structure and composition of skeletal muscle. Evaluation of nuclear content as well as ECM composition, biomechanical properties and cell growth are important parameters to assess. SDS comes forward as a detergent with the best balance between all measured parameters and holds the most promise for decellularization of skeletal muscle tissue.

Mechanism of surfactant interactions with feline coronavirus: A physical chemistry perspective.

HYPOTHESIS: Surfactants are inexpensive chemicals with promising applications in virus inactivation, particularly for enveloped viruses. Yet, the detailed mechanisms by which surfactants deactivate coronaviruses remain underexplored. This study delves into the virucidal mechanisms of various surfactants on Feline Coronavirus (FCoV) and their potential applications against more pathogenic coronaviruses. EXPERIMENTS: By integrating virucidal activity assays with fluorescence spectroscopy, dynamic light scattering and laser Doppler electrophoresis, alongside liposome permeability experiments, we have analyzed the effects of non-ionic and ionic surfactants on viral activity. FINDINGS: The non-ionic surfactant octaethylene glycol monodecyl ether (C10EO8) inactivates the virus by disrupting the lipid envelope, whereas ionic surfactants like Sodium Dodecyl Sulfate and Cetylpyridinium Chloride predominantly affect the spike proteins, with their impact on the viral membrane being hampered by kinetic and thermodynamic constraints. FCoV served as a safe model for studying virucidal activity, offering a faster alternative to traditional virucidal assays. The study demonstrates that physicochemical techniques can expedite the screening of virucidal compounds, contributing to the design of effective disinfectant formulations. Our results not only highlight the critical role of surfactant-virus interactions but also contribute to strategic advancements in public health measures for future pandemic containment and the ongoing challenge of antimicrobial resistance.

Battery waste-derived magnetic Fe-Mn-Zn/C composites as an electro-Fenton-like catalyst for the degradation of sodium dodecyl sulfate surfactant.

A batch-scale electro-Fenton (EF) process was performed using graphite anode and waste battery-based Fe -Mn -Zn/C electrocatalyst coated on low-cost graphite felt cathode. The effectiveness of the EF's performance was evident with around 83.9 + 4.1% removal of 20 mg/L of sodium-dodecyl sulfate surfactant (SDS) at an optimum current density (CD) of 5.0 mA/cm2, Na2SO4 of 0.05 M, initial pH of 7.2, and electrolysis time of 180 min. Moreover, nearly 1.78-fold more removal of SDS was achieved in EF than in the electro-oxidation process operated without any catalyst. The operating cost of 0.35 $ of per m3 per order was needed to treat SDS wastewater. The remediation of SDS follows pseudo-first-order kinetics with a rate constant of 0.0095 min-1. Additionally, 90.3 + 2.1% of SDS and 57 + 2.6% of total organic carbon (TOC) removal was attained during 240 min of treatment time in secondary treated real wastewater; hence, additional 60 min of treatment time is required for effectively treating real wastewater than synthetic wastewater. Thus, EF is effective with battery waste-derived magnetic catalyst for treating wastewater containing SDS, which can lead to achieving sustainable environmental goals.

An eco-friendly one-pot spectrofluorimetric approach for the facile determination of overactive bladder drug, tolterodine: Application to dosage forms and biological fluids.

Tolterodine tartrate (TTD) was the first antimuscarinic medication developed exclusively for the treatment of overactive bladder syndrome and was approved by the FDA in 1998. As a result of the drug's extensive utilization within the local community following its authorization, there is a pressing need to develop and validate a spectrofluorometric method that is economically efficient, easily reproducible, environmentally sustainable, and possesses high sensitivity. The developed approach relies on enhancing the fluorescence intensity of TTD to reach a level 720 % higher than its initial value, achieved through the application of an aqueous sodium dodecyl sulfate (SDS) solution. A strong correlation was observed with a correlation coefficient of 0.9998 between the concentration of TTD and the fluorescence intensity within the range of 25.0-500.0 ng mL-1. This approach could be employed to quantify TTD in its pure form and to examine pharmaceutical tablets for the purposes of verifying uniform content. Additionally, it was utilized for the evaluation of TTD concentrations in spiked human plasma.

Assessing the precision of a detergent-assisted cartridge precipitation workflow for non-targeted quantitative proteomics.

Detergent-based workflows incorporating sodium dodecyl sulfate (SDS) necessitate additional steps for detergent removal ahead of mass spectrometry (MS). These steps may lead to variable protein recovery, inconsistent enzyme digestion efficiency, and unreliable MS signals. To validate a detergent-based workflow for quantitative proteomics, we herein evaluate the precision of a bottom-up sample preparation strategy incorporating cartridge-based protein precipitation with organic solvent to deplete SDS. The variance of data-independent acquisition (SWATH-MS) data was isolated from sample preparation error by modelling the variance as a function of peptide signal intensity. Our SDS-assisted cartridge workflow yield a coefficient of variance (CV) of 13%-14%. By comparison, conventional (detergent-free) in-solution digestion increased the CV to 50%; in-gel digestion provided lower CVs between 14% and 20%. By filtering peptides predicting to display lower precision, we further enhance the validity of data in global comparative proteomics. These results demonstrate the detergent-based precipitation workflow is a reliable approach for in depth, label-free quantitative proteome analysis.

Interaction between Sophorolipids and ß-glucan in Aqueous Solutions.

Skin disorders, including acne vulgaris, atopic dermatitis, and rosacea, are characterized by the presence of biofilms, which are communities of microorganisms. The mechanical stability of biofilms is attributed to one of their constituents-polysaccharides-which are secreted by microorganisms. Sophorolipids are biosurfactants with biofilm disruption and removal abilities and are expected to become alternatives for classical petrochemical-based surfactants in cosmetics. In this study, we investigated the influence of sophorolipids on ß-glucan such as dispersion status, interaction mechanism, and configuration change as a model polysaccharide of biofilm in aqueous solution. Dynamic light scattering measurements showed that sophorolipids interfere with the aggregation of ß- glucan in aqueous solutions. In contrast, sodium dodecyl sulfate (SDS), which is used as a typical surfactant reference, promotes the aggregation of ß-glucan. The interaction between sophorolipids and ß-glucan were investigated using surface tension measurements and isothermal titration calorimetry (ITC). Surface tension increased only near critical micelle concentration (CMC) region of sophorolipids in the presence of ß-glucan. This suggests that the interaction occurred in the solution rather than at the air-liquid interface. Moreover, the results of ITC indicate that hydrophobic interactions were involved in this interaction. In addition, the results of optical rotation measurements indicate that sophorolipids did not unfold the triple helical structure of ß-glucan. ß-glucan dispersion was expected to be caused steric hindrance and electrostatic repulsion when sophorolipids interacted with ß-glucan via hydrophobic interactions owing to the unique molecular structure of sophorolipids attributed by a bulky sugar moiety and a carboxyl functional group. These results demonstrated unique performances of sophorolipids on ß-glucan and provided more insights on the efficacy of sophorolipids as good anti-biofilms.

Implementing focused echocardiography and AI-supported analysis in a population-based survey in Lesotho: implications for community-based cardiovascular disease care models.

In settings where access to expert echocardiography is limited, focused echocardiography, combined with artificial intelligence (AI)-supported analysis, may improve diagnosis and monitoring of left ventricular hypertrophy (LVH). Sixteen nurses/nurse-assistants without prior experience in echocardiography underwent a 2-day hands-on intensive training to learn how to assess parasternal long axis views (PLAX) using an inexpensive hand-held ultrasound device in Lesotho, Southern Africa. Loops were stored on a cloud-drive, analyzed using deep learning algorithms at the University Hospital Basel, and afterwards confirmed by a board-certified cardiologist. The nurses/nurse-assistants obtained 756 echocardiograms. Of the 754 uploaded image files, 628 (83.3%) were evaluable by deep learning algorithms. Of those, results of 514/628 (81.9%) were confirmed by a cardiologist. Of the 126 not evaluable by the AI algorithm, 46 (36.5%) were manually evaluable. Overall, 660 (87.5%) uploaded files were evaluable and confirmed. Following short-term training of nursing cadres, a high proportion of obtained PLAX was evaluable using AI-supported analysis. This could be a basis for AI- and telemedical support in hard-to-reach areas with minimal resources.

Novel anionic surfactant-modified chlorhexidine and its potent antimicrobial properties.

Chlorhexidine dodecyl sulfate (CHX-DS) was synthesized and characterized via single-crystal X-ray diffraction (SC-XRD), 1H nuclear magnetic resonance (NMR) spectroscopy, 1H nuclear Overhauser effect spectroscopy (NOESY), and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR). The solid-state structure, comprising a 1 : 2 stoichiometric ratio of chlorhexidine cations [C22H30Cl2N10]2+ to dodecyl sulfate anions [C12H25SO4]-, is the first report of chlorhexidine isolated with a surfactant. CHX-DS exhibits broad-spectrum antibacterial activity and demonstrates superior efficacy for reducing bacteria-generated volatile sulfur compounds (VSCs) as compared to chlorhexidine gluconate (CHG). The minimum inhibitory concentrations (MICs) of CHX-DS were 7.5, 2.5, 2.5, and 10 µM for S. enterica, E. coli, S. aureus, and S. mutans, respectively. Furthermore, MIC assays for E. coli and S. mutans demonstrate that CHX-DS and CHX exhibit a statistically significant efficacy enhancement in 2.5 µM treatment as compared to CHG. CHX-DS was incorporated into SBA-15, a mesoporous silica nanoparticle (MSN) framework, and its release was qualitatively measured via UV-vis in aqueous media, which suggests its potential as an advanced functional material for drug delivery applications.

The effect of electrical stimulation on skin vulnerability to irritants.

PURPOSE: Electrical stimulation (ES) is a widely used technique in the medical field for various purposes. The effect of ES on several skin properties has been investigated; however, its effect on skin vulnerability to irritants remains unknown. This study aimed to investigate the effects of ES application on skin vulnerability to external irritants. MATERIALS AND METHODS: An experimental study on 12 healthy male subjects (Mean ± SD, 22.9 ± 3.6 years) who completed the study. The subjects were free of skin abnormalities in the volar aspect of both forearms. Three areas were allocated to each forearm and marked as areas 1, 2, and A in the treated forearm, and areas 3, 4, and B in the control forearm. ES was applied to the volar aspect of the treated forearm for 30 min three times a week, for 2 weeks. The effect of ES on skin vulnerability was investigated using 5% and 0.5% sodium lauryl sulfate (SLS) patches applied to both treated and control forearms. The skin response to irritants was evaluated using transepidermal water loss (TEWL) and a visual erythema score 24 h after patch removal. RESULTS: Compared to the control forearm, ES increased skin permeability and erythema in response to external irritants (SLS), as measured by the visual analog score (Z = 2.75, p = 0.006) and TEWL (p < 0.05), respectively. CONCLUSIONS: ES escalates skin reactions to low concentrations of irritant substances, such as SLS, in the area between the two electrodes. This emphasizes the use of this substance, and similar irritants should be avoided in areas treated with ES.

Ultrasound assisted electrodeposition of photocatalytic antibacterial MoS2-Zn coatings controlled by sodium dodecyl sulfate.

Photocatalytic MoS2 with visible light response is considered as a promising bactericidal material owing to its non-toxicity and high antibacterial efficiency. However, photocatalysts always exist as powder, so it is difficult to settle photocatalysts on the metal surface, which limits their application in aqueous environments. To solve this problem, ultrasound and sodium dodecyl sulfate (SDS) were introduced into the co-deposition process of MoS2 and zinc matrix, so that novel MoS2-Zn coatings were obtained. In this process, ultrasound and SDS strongly promoted the dispersion and adsorption of MoS2 on the co-depositing surfaces. Then MoS2 were proved to be composited into the Zn matrix with effective structures, and the addition of SDS effectively increased the loading content of MoS2 in the MoS2-Zn coatings. Besides, the antibacterial performance of the MoS2-Zn coatings was evaluated with three typical fouling bacteria E.coli, S.aureus and B.wiedmannii. The MoS2-Zn coating showed high and broad-spectrum antibacterial properties with over 98 % inhibition rate against these three bacteria. Furthermore, it is proved that the MoS2-Zn coatings generated superoxide (·O2-) and hydroxyl radicals (·OH) under visible light, which played the dominant and subordinate roles in the antibacterial process, respectively. The MoS2-Zn coatings also showed high antibacterial stability after four "light-dark" cycles. According to the results of the attached bacteria, the MoS2-Zn coatings were considered to effectively repel the living pelagic bacteria instead of killing the attached ones, which was highly environmentally friendly. The obtained MoS2-Zn coatings were considered promising in biofilm inhibiting and marine antifouling fields.

A novel Ca2+ double cone vector system to treat compromised skin.

BACKGROUND: Stressed, damaged or very aged skin is predominantly characterized by a malfunctioning skin barrier. Underlying skin barrier malfunction is a reduced or defective calcium gradient in the epidermis. Consequently, replenishing the compromised skin's calcium stores with topical calcium could be a potential therapeutic approach. METHODS: We investigated the effect of our novel Ca2+ double cone vector system on improving the differentiation and barrier function of reconstructed human epidermis (RHE), cultured at low basal calcium (0.3 mM) to represent very aged skin. Furthermore, in a randomized placebo-controlled clinical study the skin barrier of 20 healthy volunteers was challenged with 2% sodium lauryl sulphate (SLS) for 24 h under occlusion, following and/or prior to treatment with a gel containing 2% of our calcium vector system. RESULTS: Culture in reduced basal calcium conditions (0.3 mM) strongly impeded the formation of a dense stratified epidermis. The apical treatment with 1.1 mM CaCl2 was not able to restore a functional differentiation. Treatment with 0.1% of the Ca2+ delivery system rescued the differentiation process and resulted in a normal stratified epidermis. Clinically, application of the Ca2+ vector system prior to and following SLS stress prevented increases in skin irritation and transepidermal water loss (TEWL) compared to placebo controls. Importantly, the treatment also significantly accelerated the recovery time following SLS stress. CONCLUSION: With our novel Ca2+ vector system, we highlight the delivery of bioavailable Ca2+ ions into the skin as a new and successful approach to treat a damaged barrier present in stressed, aged or atopic skin.

CONTEXTE: Les peaux stressées, lésées ou très âgées se caractérisent principalement par un dysfonctionnement de la barrière cutanée. Le dysfonctionnement de la barrière cutanée est sous­tendu par un gradient de calcium réduit ou défectueux dans l'épiderme. Par conséquent, la reconstitution des réserves de calcium de la peau fragilisées à l'aide de calcium topique pourrait constituer une approche thérapeutique potentielle. MÉTHODES: Nous avons étudié l'effet de notre nouveau système de vecteur à double cône Ca2+ sur l'amélioration de la différenciation et de la fonction de barrière de l'épiderme humain reconstitué (EHR), cultivé à un faible niveau de calcium basal (0,3 mM) pour représenter une peau très âgée. En outre, dans une étude clinique randomisée, contrôlée par placebo, la barrière cutanée de 20 volontaires en bonne santé a été exposée à 2 % de laurylsulfate de sodium (SLS) pendant 24 heures sous occlusion, après et/ou avant le traitement avec un gel contenant 2 % de notre système de vecteur de calcium. RÉSULTATS: La culture dans des conditions de calcium basal réduit (0,3 mM) a fortement empêché la formation d'un épiderme stratifié dense. Le traitement apical avec 1,1 mM de CaCl2 n'a pas permis de rétablir une différenciation fonctionnelle. Le traitement avec 0,1 % du système de libération de Ca2+ a permis de rétablir le processus de différenciation et d'obtenir un épiderme stratifié normal. Sur le plan clinique, l'application du système de vecteur Ca2+ avant et après l'exposition au SLS a empêché l'augmentation de l'irritation cutanée et de la perte d'eau transépidermique (Transepidermal Water Loss, TEWL) par rapport aux témoins sous placebo. Il est important de noter que le traitement a également accéléré de manière significative le temps de récupération après l'exposition au SLS. CONCLUSION: Grâce à notre nouveau système de vecteurs Ca2+, nous mettons en évidence l'apport d'ions Ca2+ biodisponibles dans la peau comme une approche nouvelle et efficace pour traiter la barrière endommagée présente dans une peau stressée, âgée ou atopique.

Molecular Cloning, Characterization, and Application of Organic Solvent-Stable and Detergent-Compatible Thermostable Alkaline Protease from Geobacillus thermoglucosidasius SKF4.

Several thermostable proteases have been identified, yet only a handful have undergone the processes of cloning, comprehensive characterization, and full exploitation in various industrial applications. Our primary aim in this study was to clone a thermostable alkaline protease from a thermophilic bacterium and assess its potential for use in various industries. The research involved the amplification of the SpSKF4 protease gene, a thermostable alkaline serine protease obtained from the Geobacillus thermoglucosidasius SKF4 bacterium through polymerase chain reaction (PCR). The purified recombinant SpSKF4 protease was characterized, followed by evaluation of its possible industrial applications. The analysis of the gene sequence revealed an open reading frame (ORF) consisting of 1,206 bp, coding for a protein containing 401 amino acids. The cloned gene was expressed in Escherichia coli. The molecular weight of the enzyme was measured at 28 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The partially purified enzyme has its highest activity at a pH of 10 and a temperature of 80°C. In addition, the enzyme showed a half-life of 15 h at 80°C, and there was a 60% increase in its activity at 10 mM Ca2+ concentration. The activity of the protease was completely inhibited (100%) by phenylmethylsulfonyl fluoride (PMSF); however, the addition of sodium dodecyl sulfate (SDS) resulted in a 20% increase in activity. The enzyme was also stable in various organic solvents and in certain commercial detergents. Furthermore, the enzyme exhibited strong potential for industrial use, particularly as a detergent additive and for facilitating the recovery of silver from X-ray film.

Effect of biologically active amino acids based deep eutectic solvents on sodium dodecyl sulfate: A comparative spectroscopic study.

Study the effects of three novel synthesized biologically deep eutectic solvents (DESs) on the micellar characteristics of anionic sodium dodecyl sulfate (SDS). The biologically active amino acids based three DESs synthesized have composed the 2:1 M of L-Aspartic acid (DES1), L-Tyrosine (DES2), L-Glutamine (DES3) and choline chloride, furthermore which characterized by FTIR. Surface tension, viscosity, UV-visible, fluorescence, and FTIR spectroscopy are a few of the techniques used to study the interactions of SDS within 5 and 10 wt% of three novel biological DESs in aqueous solutions. The presence and absence of 5 and 10 wt% of the three novel biological DESs in an aqueous solution is used to study the critical micelle concentration (CMC) and various interfacial characteristics including CMC, the efficiency of adsorption, the maximum surface excess concentration, the packing parameter, the minimum area per molecule, and the surface pressure at CMC, is assessed by the surface tension method. The calculated fluorescence data and those obtained using surface tension and UV-visible methods correspond well. The interactions that cause changes in the structure of the surfactant self-assemblies within aqueous DESs were investigated using FTIR technique. It is significant to highlight that the presence of unique biological DESs considerably facilitates the micellization process for SDS and the extent is more affinity for DES2 compared to DES1/DES3. The colloidal properties of DES and their combinations with water are anticipated to benefit from the current findings.

Effect of surfactants on the interfacial viscoelasticity and stability of silk fibroin at different oil-water interfaces.

BACKGROUND: The biocompatible amphiphilic silk fibroin, extracted from domesticated silkworms, can adsorb at the oil-water interface and form elastic interfacial layers. In this study, three surfactants (cationic cetyltrimethylammonium bromide, the nonionic polyoxyethylene sorbitan monolaurate, and the anionic sodium dodecyl sulfate) were selected to investigate, through interfacial shear rheology, the influences of surfactants on the interfacial viscoelasticity and stability of silk fibroin at the interfaces between water and two different oils. RESULTS: The presence of surfactant prolongs the equilibration time and enhances the interfacial elastic modulus and toughness of the interfacial silk fibroin layers, especially at the nonpolar dodecane-water interface. However, when the surfactant exceeds a critical concentration, the shear modulus and stability of interfacial silk fibroin layers begin to decrease due to the competitive adsorption of surfactant molecules and the weakening of the protein network. Owing to electrostatic interactions, the ionic surfactants cetyltrimethylammonium bromide and sodium dodecyl sulfate can form more hydrophobic complexes with silk fibroin, which results in higher shear moduli than for silk fibroin and silk fibroin-polyoxyethylene sorbitan monolaurate mixture. CONCLUSION: Both the surfactant type and oil polarity play important roles in the adsorption, shear viscoelasticity, and stability of silk fibroin at the oil-water interface. Enhanced interactions between a silk fibroin-surfactant mixture and the oil phase delay the equilibration of the adsorption layers but strengthen the stability of interfacial layers. © 2023 Society of Chemical Industry.

3D electro-Fenton augmented with iron-biochar particle electrodes derived from waste iron bottle caps and sugarcane bagasse for the remediation of sodium dodecyl sulphate.

The present work demonstrates a novel strategy of synthesizing iron-biochar (Fe@BCSB) composite made with the waste iron bottle cap and sugar cane bagasse for implementation in the three-dimensional electro-Fenton (3DEF) process. The catalytic ability of the Fe@BCSB composite was explored to remediate the sodium dodecyl sulphate (SDS) surfactant from wastewater at neutral pH. At the optimum operating condition of Fe@BCSB dose of 1.0 g L-1, current density of 4.66 mA cm-2, and Na2SO4 dose of 50 mM, nearly 92.7 ± 3.1% of 20 mg L-1 of SDS abatement was attained during 120 min of electrolysis time. Moreover, the Fe@BCSB showed significant recyclability up to six cycles. Besides, other organics were successfully treated with more than 85% abatement efficiency in the proposed Fe@BCSB-supported 3DEF process. The total operating cost obtained during SDS treatment was around 0.31 US$ m-3 of wastewater. The phytotoxicity test revealed the positive impact of the 3DEF-treated effluent on the germination of the Vigna radiata. The electron paramagnetic resonance conveyed •OH as the prevailing reactive species for the oxidation of SDS in the 3DEF process. Further, about 81.3 ± 3.8% of SDS and 53.7 ± 4.1% of mineralization efficacy were acquired from the real institutional sewage.