Ultraviolet irradiation improves the hydrophilicity and osteo-conduction of hydroxyapatite.

BACKGROUND: Treating a titanium or titanium alloy implant with ultraviolet (UV) light is known to improve its associated cell growth and osseointegration. However, little is known about the effect of UV irradiation on hydroxyapatite (HA), which is also used frequently in orthopaedic and dental surgery. Here we examined the effect of UV irradiation on the hydrophilicity of HA, and on its osteoconduction ability in rats. METHODS: HA implants of low and high porosity were treated with UV light, and photofunctionalisation was assessed by the contact angle of a water drop on the surface. HA implants were also inserted into rat femurs, and the rats were killed 2 or 4 weeks later. The bone volume and bone area ratio were calculated from microcomputed tomography and histological data. RESULTS: The contact angle of a water drop on HA implants of both porosities was significantly reduced after UV irradiation. In the rat femurs, there was no significant difference in the bone volume between the UV light-treated and control implants at 2 or 4 weeks. The bone area ratio for the UV light-treated versus control implants was significantly increased at 2 weeks, but there was no significant difference at 4 weeks. CONCLUSIONS: The surface of UV-irradiated HA disks was hydrophilic, in contrast to that of non-irradiated HA disks. Photofunctionalisation accelerated the increase in the bone area ratio in the early healing stage. This technology can be applied to surgical cases requiring the early fusion of bone and HA.

BMP-2-Loaded HAp:Ln3+ (Ln = Yb, Er, Gd) Nanorods with Dual-Mode Imaging for Efficient MC3t3-E1 Cell Differentiation Regulation.

Effective bone tissue reconstitution improves the treatment success rate of dental implantation and preserves natural teeth during periodontal tissue repair. Hydroxyapatite (HAp) has received much attention in bone remodeling field because its mineralized structure is similar to that of the natural bone tissue. For this reason, it has been used as a carrier for growth factors. Although HAp possesses outstanding biomedical properties, its capacity of loading and releasing bone growth factors and promoting osteogenesis is not well understood. In this study, Ln3+ (Ln = Yb3+, Er3+, Gd3+)-doped HAp (HAp:Ln3+) nanorods were synthesized by one-step hydrothermal method. To improve its biocompatibility and surface properties, bone morphogenetic protein-2 (BMP-2) was loaded onto the surface of HAp:Ln3+ nanorods. The results showed that BMP-2 incorporation promoted bone formation and enhanced the expression of early bone-related gene and protein (RunX2, SP7, OPN). In addition, Yb3+- and Er3+-doped HAp nanorods were examined by upconversion luminescence with 980 nm near-infrared laser irradiation to monitor the delivery position of BMP-2 protein. Furthermore, due to the positive magnetism correlated with the concentration of Gd3+, HAp:Ln3+ with enhanced contrast brightening can be deemed as T1 MIR contrast agents. These findings indicate that HAp doped with rare-earth ions and loaded with BMP-2 has the potential to promote bone tissue repair and execute dual-mode imaging.

Electron microscopy analysis of the thermal phase transition from hydroxyapatita to ß-TCP observed in human teeth.

Samples of enamel and dentin from human molar teeth were heated in air from room temperature (25°C) up to 1200°C and the phase transition from hydroxyapatite (HAP) to tricalcium phosphate (ß-TCP) was recorded. The changes produced in morphology and chemical composition in the tooth during heating were analysed by light microscopy, scanning electron microscopy (SEM), characteristic x-ray energy dispersion spectroscopy (EDS), x-ray diffraction (XRD), electron diffraction, transmission electron microscopy (TEM) and high-resolution electron microscopy (HRTEM). The results indicated a high correlation relationship among Ca content, P content, O content and Na content, and the existence of the Kirkendall effect during the HAP- ß-TCP phase transition. LAY DESCRIPTION: This work is related with tooth materials. Samples of enamel and dentine from human molar teeth were heated in air from 25°C up to 1200°C and the phase transition from hydroxyapatite (HAP) to tricalcium phosphate (ß-TCP) was recorded. The ß-TCP phase is also known as whitlockite. The changes produced in morphology and chemical composition in the tooth during heating were analysed by electron microscopy and X-ray diffraction. The results indicated a high correlation relationship among Ca, P, O and Na contents, and the existence of the Kirkendall effect, the atomic diffusion producing voids, during the HAP- ß-TCP phase transition.

Intracoronal stress transfer through enamel following RBC photopolymerisation: A synchrotron X-ray study.

OBJECTIVES: To measure the spatial distribution of crystallographic strain in tooth enamel induced by the photo-polymerisation of a dimethacrylate resin based composite cavity restoration. METHODS: Six sound first premolar teeth, allocated into two groups (n=3), were prepared with mesio-occlusal distal cavities. The enamel was machined at the point of maximum convexity on the outer tooth to create a vertical fin of thickness 100µm and 0.5mm depth to allow for synchrotron X-ray diffraction measurements. 2D diffraction patterns were used to determine crystallite orientation and quantify changes in the hydroxyapatite crystal lattice parameters, before and after photo-polymerisation of a composite material placed in the cavity, to calculate strain in the respective axis. The composite was photo-polymerised with either relatively high (1200mWcm-2, group 1) or low (480mWcm-2, group 2) irradiances using LED or quartz halogen light sources, respectively. A paired t-test was used to determine significant differences in strain between irradiance protocols at ɑ=0.001. RESULTS: Photo-polymerisation of the composite in the adjacent cavity induced significant changes in both the crystallographic c and a axes of the enamel measurement area. However the magnitude of strain was low with ∼0.1% difference before and after composite photo-polymerisation. Strain in enamel was not uniformly distributed and varied spatially as a function of crystallite orientation. Increased alignment of crystallites perpendicular to the cavity wall was associated with higher c axis strain. Additionally, strain was significantly greater in the c (p<0.001) and a axis (p<0.001) when using a high irradiance photo-polymerisation protocol. SIGNIFICANCE: Although cuspal deflection is routinely measured to indirectly assess the 'global' effect of composite shrinkage on the tooth-restoration complex, here we show that absolute strains generated in enamel are low, indicating strain relief mechanisms may be operative. The use of low irradiance protocols for photo-polymerisation resulted in reduced strain.

Influence of backscatter radiation on cranial reconstruction implants.

OBJECTIVE: We aimed to evaluate backscatter dose variations in different cranial bone implant materials in an experimental model designed to simulate post-operative radiotherapy. METHODS: We assessed the radiation backscatter doses associated with sheet- and mesh-type titanium plates and hydroxyapatite (HAP) samples (porosity: 35%, 50% and 85%). The samples were irradiated with 6- and 10-MV photon beams from a linear accelerator. Measurements were obtained using an ionization chamber and radiochromic films cut from the same batch. RESULTS: At 6 MV, the titanium sheet showed the highest peak for backscattered radiation, followed by (in decreasing order) HAP30%, HAP50%, titanium mesh and HAP85%. At 10 MV, HAP30% showed the highest peak, followed by HAP50%, titanium sheet, titanium mesh and HAP85%. The peaks were at different depths in the titanium and HAP samples. The thickness of the human scalp is approximately 7 mm; therefore, measurements were obtained 0-7 mm above the implants to assess the likely dose on the scalp. A comparison of the maximum dose on the scalp showed the titanium sheet had the highest dose at both 6 and 10 MV. CONCLUSION: The backscatter dose differed with the density of the material and the backscatter depth was different for each material. Advances in knowledge: Ulcer formation due to radiotherapy after brain tumour depends on not only radiation but also the implant material. Therefore, the density and type of implant material should be considered when planning radiotherapy and selecting bone reconstruction materials.

Influence of carbon nanotubes and graphene nanosheets on photothermal effect of hydroxyapatite.

Herein we present a successful strategy for enhancement of photothermal efficiency of hydroxyapatite (HAP) by its conjugation with carbon nanotubes (CNTs) and graphene nanosheets (GR). Owing to excellent biocompatibility with human body and its non-toxicity, implementation of HAP based nanomaterials in photothermal therapy (PTT) provides non-replaceable benefits over PTE agents. Therefore, in this report, it has been experimentally exploited that the photothermal effect (PTE) of HAP has significantly improved by its assembly with CNTs and GR. It is found that the type of carbon nanomaterial used to conjugate with HAP has influence on its PTE in such a way that the photothermal efficiency of GR-HAP was higher than CNTs-COOH-HAP under exposure to 980nm near-infrared (NIR) laser. The temperature attained by aqueous dispersions of both CNTs-COOH-HAP and GR-HAP after illuminating to NIR radiations for 7min was found to be above 50°C, which is beyond the temperature tolerance of cancer cells. So that the rise in temperature shown by both CNTs-COOH-HAP and GR-HAP is enough to induce the death of tumoral or cancerous cells. Overall, this approach in modality of HAP with CNTs and GR provide a great potential for development of future nontoxic PTE agents.

Chloride ion-driven transformation from Ag3PO4 to AgCl on the hydroxyapatite support and its dual antibacterial effect against Escherichia coli under visible light irradiation.

Visible light-driven photocatalytic inactivation of Escherichia coli was performed using hydroxyapatite-supported Ag3PO4 nanocomposites (Ag3PO4/HA). The antibacterial performance was evaluated by the methods of zone of inhibition plates and minimum inhibitory concentration test. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were employed to investigate the instability and transformation of the nanocomposite by comparing the crystalline, phase, and the morphology before and after exposure to Luria-Bertani culture medium under visible light irradiation. Ag3PO4 nanoparticles on the support were found to be shortly transformed into AgCl due to high chloride concentration of Luria-Bertani culture medium. The AgCl/HA nanocomposite showed both excellent intrinsic antibacterial performance contributed by the released silver ions and visible light-induced photocatalytic disinfection toward E. coli cells. This dual antibacterial function mechanism was validated by trapping the hydroxyl free radical and detecting the silver ions during the photocatalytic antibacterial process. The morphological change of E. coli cells in different reaction intervals was obtained by scanning electron microscopy (SEM) to complementally verify photocatalytic inactivation of E. coli. This work suggests that an essential comparison study is required for the antibacterial materials before and after the photocatalytic inactivation of bacterial cells using Ag3PO4 nanoparticles or Ag3PO4-related nanocomposites in mediums containing high-concentration chloride ions.

Thermoluminescence properties of gamma-irradiated nano-structure hydroxyapatite.

The suitability of nano-structured hydroxyapatite (HAP) for use as a thermoluminescence dosimeter was investigated. HAP samples were synthesized using a hydrolysis method. The formation of nanoparticles was confirmed by X-ray diffraction and average particle size was estimated to be ~30 nm. The glow curve exhibited a peak centered at around 200 °C. The additive dose method was applied and this showed that the thermoluminescence (TL) glow curves follow first-order kinetics due to the non-shifting nature of Tm after different doses. The numbers of overlapping peaks and related kinetic parameters were identified from Tm -Tstop through computerized glow curve deconvolution methods. The dependence of the TL responses on radiation dose was studied and a linear dose response up to 1000 Gy was observed for the samples.

Use of Hydroxyapatite Doping to Enhance Responsiveness of Heat-Inducible Gene Switches to Focused Ultrasound.

Recently, we demonstrated that ultrasound-based hyperthermia can activate cells containing a heat-activated and ligand-inducible gene switch in a spatio-temporally controlled manner. These engineered cells can be incorporated into hydrogel scaffolds (e.g., fibrin) for in vivo implantation, where ultrasound can be used to non-invasively pattern transgene expression. Due to their high water content, the acoustic attenuation of fibrin scaffolds is low. Thus, long ultrasound exposures and high acoustic intensities are needed to generate sufficient hyperthermia for gene activation. Here, we demonstrate that the attenuation of fibrin scaffolds and the resulting hyperthermia achievable with ultrasound can be increased significantly by doping the fibrin with hydroxyapatite (HA) nanopowder. The attenuation of a 1% (w/v) fibrin scaffold with 5% (w/v) HA was similar to soft tissue. Transgene activation of cells harboring the gene switch occurred at lower acoustic intensities and shorter exposures when the cells were encapsulated in HA-doped fibrin scaffolds versus undoped scaffolds. Inclusion of HA in the fibrin scaffold did not affect the viability of the encapsulated cells.

Photo-cross-linkable methacrylated gelatin and hydroxyapatite hybrid hydrogel for modularly engineering biomimetic osteon.

Modular tissue engineering holds great potential in regenerating natural complex tissues by engineering three-dimensional modular scaffolds with predefined geometry and biological characters. In modular tissue-like construction, a scaffold with an appropriate mechanical rigidity for assembling fabrication and high biocompatibility for cell survival is the key to the successful bioconstruction. In this work, a series of composite hydrogels (GH0, GH1, GH2, and GH3) based on a combination of methacrylated gelatin (GelMA) and hydroxyapatite (HA) was exploited to enhance hydrogel mechanical rigidity and promote cell functional expression for osteon biofabrication. These composite hydrogels presented a lower swelling ratio, higher mechanical moduli, and better biocompatibility when compared to the pure GelMA hydrogel. Furthermore, on the basis of the composite hydrogel and photolithograph technology, we successfully constructed an osteon-like concentric double-ring structure in which the inner ring encapsulating human umbilical vascular endothelial cells (HUVECs) was designed to imitate blood vessel tubule while the outer ring encapsulating human osteoblast-like cells (MG63s) acts as part of bone. During the coculture period, MG63s and HUVECs exhibited not only satisfying growth status but also the enhanced genic expression of osteogenesis-related and angiogenesis-related differentiations. These results demonstrate this GelMA-HA composite hydrogel system is promising for modular tissue engineering.

Internal in vitro dosimetry for fish using hydroxyapatite-based EPR detectors.

A number of aquatic ecosystems were exposed to ionizing radiation as a result of the activities of the Mayak Production Association in the Southern Urals, former Soviet Union, in the 1950s. Currently, fishes inhabiting contaminated lakes are being actively studied. These investigations need dosimetric support. In the present paper the results of a pilot study for elaborating an EPR dosimeter which can be used for internal dosimetry in vitro are described. Biological hydroxyapatite is proposed here to be used as a detecting substance. More specifically, small hydroxyapatite grains are proposed for use as point detectors fixed in a solid matrix. After having been pelletized, the detectors were covered by Mylar and placed in the body of a fish to be stored in the fridge for several months. Application of the detectors for internal fish dosimetry demonstrated that the enamel sensitivity is sufficient for passive detection of ionizing radiation in fishes inhabiting contaminated lakes in the Southern Urals.

Thermal effect on thermoluminescence response of hydroxyapatite.

This paper presents the experimental results of the thermoluminescence (TL) induced by gamma radiation in synthetic hydroxyapatite (HAp) obtained by the precipitation method, using Ca(NO3)2·4H2O and (NH4)2HPO4 and calcined at different temperatures. The structural and morphological characterization was carried out by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. TL response as a function of gamma radiation dose was in a wide range, where intensity was enhanced in the sample annealed at 900°C, which tricalcium diphosphate (TCP) phase appear. Fading of the TL was also studied.

Energy deposition of H and He ion beams in hydroxyapatite films: a study with implications for ion-beam cancer therapy.

Ion-beam cancer therapy is a promising technique to treat deep-seated tumors; however, for an accurate treatment planning, the energy deposition by the ions must be well known both in soft and hard human tissues. Although the energy loss of ions in water and other organic and biological materials is fairly well known, scarce information is available for the hard tissues (i.e., bone), for which the current stopping power information relies on the application of simple additivity rules to atomic data. Especially, more knowledge is needed for the main constituent of human bone, calcium hydroxyapatite (HAp), which constitutes 58% of its mass composition. In this work the energy loss of H and He ion beams in HAp films has been obtained experimentally. The experiments have been performed using the Rutherford backscattering technique in an energy range of 450-2000 keV for H and 400-5000 keV for He ions. These measurements are used as a benchmark for theoretical calculations (stopping power and mean excitation energy) based on the dielectric formalism together with the MELF-GOS (Mermin energy loss function-generalized oscillator strength) method to describe the electronic excitation spectrum of HAp. The stopping power calculations are in good agreement with the experiments. Even though these experimental data are obtained for low projectile energies compared with the ones used in hadron therapy, they validate the mean excitation energy obtained theoretically, which is the fundamental quantity to accurately assess energy deposition and depth-dose curves of ion beams at clinically relevant high energies. The effect of the mean excitation energy choice on the depth-dose profile is discussed on the basis of detailed simulations. Finally, implications of the present work on the energy loss of charged particles in human cortical bone are remarked.

Thermal, creep-recovery and viscoelastic behavior of high density polyethylene/hydroxyapatite nano particles for bone substitutes: effects of gamma radiation.

BACKGROUND: High Density Polyethylene (HDPE) is one of the most often used polymers in biomedical applications. The limitations of HDPE are its visco-elastic behavior, low modulus and poor bioactivity. To improve HDPE properties, HA nanoparticles can be added to form polymer composite that can be used as alternatives to metals for bone substitutes and orthopaedic implant applications. METHOD: In our previous work (BioMedical Engineering OnLine 2013), different ratios of HDPE/HA nanocomposites were prepared using melt blending in a co-rotating intermeshing twin screw extruder. The accelerated aging effects on the tensile properties and torsional viscoelastic behavior (storage modulus (G') and Loss modulus (G")) at 80°C of irradiated and non-irradiated HDPE/HA was investigated. Also the thermal behavior of HDPE/HA were studied. In this study, the effects of gamma irradiation on the tensile viscoelastic behavior (storage modulus (E') and Loss modulus (E")) at 25°C examined for HDPE/HA nanocomposites at different frequencies using Dynamic Mechanical Analysis (DMA). The DMA was also used to analyze creep-recovery and relaxation properties of the nanocomposites. To analyze the thermal behavior of the HDPE/HA nanocomposite, Differential Scanning Calorimetry (DSC) was used. RESULTS: The microscopic examination of the cryogenically fractured surface revealed a reasonable distribution of HA nanoparticles in the HDPE matrix. The DMA showed that the tensile storage and loss modulus increases with increasing the HA nanoparticles ratio and the test frequency. The creep-recovery behavior improves with increasing the HA nanoparticle content. Finally, the results indicated that the crystallinity, viscoelastic, creep recovery and relaxation behavior of HDPE nanocomposite improved due to gamma irradiation. CONCLUSION: Based on the experimental results, it is found that prepared HDPE nanocomposite properties improved due to the addition of HA nanoparticles and irradiation. So, the prepared HDPE/HA nanocomposite appears to have fairly good comprehensive properties that make it a good candidate as bone substitute.

Irradiation conditions for fiber laser bonding of HAp-glass ceramics with bovine cortical bone.

Orthopedic implants are widely used to repair bones and to replace articulating joint surfaces. It is important to develop an instantaneous technique for the direct bonding of bone and implant materials. The aim of this study was to develop a technique for the laser bonding of bone with an implant material like ceramics. Ceramic specimens (10 mm diameter and 1 mm thickness) were sintered with hydroxyapatite and MgO-Al2O3-SiO2 glass powders mixed in 40:60 wt% proportions. A small hole was bored at the center of a ceramic specimen. The ceramic specimen was positioned onto a bovine bone specimen and a 5 mm diameter area of the ceramic specimen was irradiated using a fiber laser beam (1070-1080 nm wavelength). As a result, the bone and the ceramic specimens bonded strongly under the irradiation conditions of a 400 W laser power and a 1.0 s exposure time. The maximum shear strength was 5.3 ± 2.3 N. A bonding substance that penetrated deeply into the bone specimen was generated around the hole in the ceramic specimen. On using the fiber laser, the ceramic specimen instantaneously bonded to the bone specimen. Further, the irradiation conditions required for the bonding were investigated.

KrF excimer laser precision machining of hard and brittle ceramic biomaterials.

KrF excimer laser precision machining of porous hard-brittle ceramic biomaterials was studied to find a suitable way of machining the materials into various desired shapes and sizes without distorting their intrinsic structure and porosity. Calcium phosphate glass ceramics (CPGs) and hydroxyapatite (HA) were chosen for the study. It was found that KrF excimer laser can cut both CPGs and HA with high efficiency and precision. The ablation rates of CPGs and HA are respectively 0.081 µm/(pulse J cm(-2)) and 0.048 µm/(pulse J cm(-2)), while their threshold fluences are individually 0.72 and 1.5 J cm(-2). The cutting quality (smoothness of the cut surface) is a function of laser repetition rate and cutting speed. The higher the repetition rate and lower the cutting speed, the better the cutting quality. A comparison between the cross sections of CPGs and HA cut using the excimer laser and using a conventional diamond cutting blade indicates that those cut by the excimer laser could retain their intrinsic porosity and geometry without distortion. In contrast, those cut by conventional machining had distorted geometry and most of their surface porosities were lost. Therefore, when cutting hard-brittle ceramic biomaterials to prepare scaffold and implant or when sectioning them for porosity evaluation, it is better to choose KrF excimer laser machining.

Effects of water treatment and sample granularity on radiation sensitivity and stability of EPR signals in X-ray irradiated bone samples.

The article describes effects of sample conditions during its irradiation and electron paramagnetic resonance (EPR) measurements on the background (BG) and dosimetric EPR signals in bone. Intensity of the BG signal increased up to two to three times after crushing of bone to sub-millimetre grains. Immersion of samples in water caused about 50 % drop in intensity of the BG component followed by its regrowth in 1-2 months. Irradiation of bone samples produced an axial dosimetric EPR signal (radiation-induced signal) attributed to hydroxyapatite component of bone. This signal was stable and was not affected by water. In samples irradiated in dry conditions, EPR signal similar to the native BG was also generated by radiation. In samples irradiated in wet conditions, this BG-like component was initially much smaller than in bone irradiated as dry, but increased in time, reaching similar levels as in dry-irradiated samples. It is concluded that accuracy of EPR dosimetry in bones can be improved, if calibration of the samples is done by their irradiations in wet conditions.

Surface charge and carbon contamination on an electron-beam-irradiated hydroxyapatite thin film investigated by photoluminescence and phase imaging in atomic force microscopy.

The surface properties of hydroxyapatite, including electric charge, can influence the biological response, tissue compatibility, and adhesion of biological cells and biomolecules. Results reported here help in understanding this influence by creating charged domains on hydroxyapatite thin films deposited on silicon using electron beam irradiation and investigating their shape, properties, and carbon contamination for different doses of incident injected charge by two methods. Photoluminescence laser scanning microscopy was used to image electrostatic charge trapped at pre-existing and irradiation-induced defects within these domains, while phase imaging in atomic force microscopy was used to image the carbon contamination. Scanning Auger electron spectroscopy and Kelvin probe force microscopy were used as a reference for the atomic force microscopy phase contrast and photoluminescence laser scanning microscopy measurements. Our experiment shows that by combining the two imaging techniques the effects of trapped charge and carbon contamination can be separated. Such separation yields new possibilities for advancing the current understanding of how surface charge influences mediation of cellular and protein interactions in biomaterials.

Combination of EPR measurements and DFT calculations to study nitrate impurities in the carbonated nanohydroxyapatite.

We demonstrate the application of the combined experimental-computational approach for studying the anionic impurities in hydroxyapatite (HAp). Influence of the carbonation level (x) on the concentration of the NO3(2-) radicals in the HAp nanocrystals of Ca10-xNax(PO4)6-x(CO3)x(OH)2 with x in the range 0 < x < 2 and average sizes of 30 nm is investigated by different analytical methods including electron paramagnetic resonance (EPR). Stable NO3(2-) radicals are formed under X-ray irradiation of nano-HAp samples from NO3(-) ions incorporated in trace amounts during the wet synthesis process. Density functional theory (DFT) based calculations show energetic preference for the PO4 group substitution by NO3(-) ions. Comparison of the calculated and experimental spectroscopic parameters (g and hyperfine tensors) reveals that EPR detects the NO3(2-) radicals located in the positions of the PO4 group only. It is shown that with the increase in x, the carbonate ions substitute the NO3(2-)/NO3(-) ions. DFT calculations confirm that carbonate incorporation in HAp structure is energetically more favorable than the formation of the nitrate defect.

Effect of gamma irradiation on structural and biological properties of a PLGA-PEG-hydroxyapatite composite.

Gamma irradiation is able to affect various structural and biological properties of biomaterials In this study, a composite of Hap/PLGA-PEG and their ingredients were submitted to gamma irradiation doses of 25 and 50 KGy. Various properties such as molecular weight (GPC), thermal behavior (DSC), wettability (contact angle), cell viability (MTT assay), and alkaline phosphatase activity were studied for the composites and each of their ingredients. The results showed a decrease in molecular weight of copolymer with no change in the glass transition and melting temperatures after gamma irradiation. In general gamma irradiation can increase the activation energy ΔH of the composites and their ingredients. While gamma irradiation had no effect on the wettability of copolymer samples, there was a significant decrease in contact angle of hydroxyapatite and composites with increase in gamma irradiation dose. This study showed an increase in biocompatibility of hydroxyapatite with gamma irradiation with no significant effect on cell viability in copolymer and composite samples. In spite of the fact that no change occurred in alkaline phosphatase activity of composite samples, results indicated a decrease in alkaline phosphatase activity in irradiated hydroxyapatites. These effects on the properties of PLGA-PEG-hydroxyapatite can enhance the composite application as a biomaterial.