RESUMO
In this study, we investigate the performance of the Gunma University Heavy Ion Medical Center's ion computed tomography (CT) system, which measures the residual range of a carbon-ion beam using a fluoroscopy screen, a charge-coupled-device camera, and a moving wedge absorber and collects CT reconstruction images from each projection angle. Each 2D image was obtained by changing the polymethyl methacrylate (PMMA) thickness, such that all images for one projection could be expressed as the depth distribution in PMMA. The residual range as a function of PMMA depth was related to the range in water through a calibration factor, which was determined by comparing the PMMA-equivalent thickness measured by the ion CT system to the water-equivalent thickness measured by a water column. Aluminium, graphite, PMMA, and five biological phantoms were placed in a sample holder, and the residual range for each was quantified simultaneously. A novel method of CT reconstruction to correct for the angular deflection of incident carbon ions in the heterogeneous region utilising the Bragg peak reduction (BPR) is also introduced in this paper, and its performance is compared with other methods present in the literature such as the decomposition and differential methods. Stopping power ratio values derived with the BPR method from carbon-ion CT images matched closely with the true water-equivalent length values obtained from the validation slab experiment.
Assuntos
Carbono , Íons Pesados , Processamento de Imagem Assistida por Computador/métodos , Imagens de Fantasmas , Tomografia Computadorizada por Raios X/instrumentação , Tomografia Computadorizada por Raios X/métodos , Ecrans Intensificadores para Raios X/normas , HumanosRESUMO
As the use of diagnostic X-ray equipment with flat panel detectors (FPDs) has increased, so has the importance of proper management of FPD systems. To ensure quality control (QC) of FPD system, an easy method for evaluating FPD imaging performance for both stationary and moving objects is required. Until now, simple rotatable QC phantoms have not been available for the easy evaluation of the performance (spatial resolution and dynamic range) of FPD in imaging moving objects. We developed a QC phantom for this purpose. It consists of three thicknesses of copper and a rotatable test pattern of piano wires of various diameters. Initial tests confirmed its stable performance. Our moving phantom is very useful for QC of FPD images of moving objects because it enables visual evaluation of image performance (spatial resolution and dynamic range) easily.
Assuntos
Imagens de Fantasmas , Controle de Qualidade , Intensificação de Imagem Radiográfica/instrumentação , Ecrans Intensificadores para Raios X/normas , Movimento (Física) , Intensificação de Imagem Radiográfica/normasRESUMO
In this project, we investigated the use of an electronic portal imaging device (EPID), together with the treatment planning system (TPS) and MLC log files, to determine the delivered doses to the patient and evaluate the agreement between the treatment plan and the delivered dose distribution. The QA analysis results are presented for 15 VMAT patients using the EPID measurements, the ScandiDos Delta4 dosimeter, and the beam fluence calculated from the multileaf collimator (MLC) log file. EPID fluence images were acquired in continuous acquisition mode for each of the patients and they were processed through an in-house MATLAB program to create an opening density matrix (ODM), which was used as the input fluence for the dose calculation in the TPS (Pinnacle3). The EPID used in this study was the aSi1000 Varian on a Novalis TX linac equipped with high-definition MLC. The actual MLC positions and gantry angles were retrieved from the MLC log files and the data were used to calculate the delivered dose distributions in Pinnacle. The resulting dose distributions were then compared against the corresponding planned dose distributions using the 3D gamma index with 3 mm/3% passing criteria. The ScandiDos Delta4 phantom was also used to measure a 2D dose distribution for all the 15 patients and a 2D gamma was calculated for each patient using the Delta4 software. The average 3D gamma using the EPID images was 96.1% ± 2.2%. The average 3D gamma using the log files was 98.7% ± 0.5%. The average 2D gamma from the Delta4 was 98.1% ± 2.1%. Our results indicate that the use of the EPID, combined with MLC log files and a TPS, is a viable method for QA of VMAT plans.
Assuntos
Neoplasias/radioterapia , Modelagem Computacional Específica para o Paciente , Garantia da Qualidade dos Cuidados de Saúde/normas , Radiometria/normas , Planejamento da Radioterapia Assistida por Computador/normas , Radioterapia de Intensidade Modulada/normas , Documentação/normas , Humanos , Modelos Anatômicos , Dosagem Radioterapêutica , Ecrans Intensificadores para Raios X/normasRESUMO
The purpose of this study is to evaluate the accuracy and reproducibility of the IsoCal geometric calibration system for kilovoltage (kV) and megavoltage (MV) imagers on Varian C-series linear accelerators (linacs). IsoCal calibration starts by imaging a phantom and collimator plate using MV images with different collimator angles, as well as MV and kV images at different gantry angles. The software then identifies objects on the collimator plate and in the phantom to determine the location of the treatment isocenter and its relation to the MV and kV imager centers. It calculates offsets between the positions of the imaging panels and the treatment isocenter as a function of gantry angle and writes a correction file that can be applied to MV and kV systems to correct for those offsets in the position of the panels. We performed IsoCal calibration three times on each of five Varian C-series linacs, each time with an independent setup. We then compared the IsoCal calibrations with a simplified Winston-Lutz (WL)-based system and with a Varian cubic phantom (VC)-based system. The maximum IsoCal corrections ranged from 0.7 mm to 1.5 mm for MV and 0.9 mm to 1.8 mm for kV imagers across the five linacs. The variations in the three calibrations for each linac were less than 0.2 mm. Without IsoCal correction, the WL results showed discrepancies between the treatment isocenter and the imager center of 0.9 mm to 1.6 mm (for the MV imager) and 0.5 mm to 1.1 mm (for the kV imager); with IsoCal corrections applied, the differences were reduced to 0.2 mm to 0.6 mm (MV) and 0.3 mm to 0.6 mm (kV) across the five linacs. The VC system was not as precise as the WL system, but showed similar results, with discrepancies of less than 1.0 mm when the IsoCal corrections were applied. We conclude that IsoCal is an accurate and consistent method for calibration and periodic quality assurance of MV and kV imaging systems.
Assuntos
Aceleradores de Partículas/normas , Radiocirurgia/instrumentação , Radioterapia Guiada por Imagem/instrumentação , Software , Tomografia Computadorizada por Raios X/instrumentação , Tomografia Computadorizada por Raios X/normas , Ecrans Intensificadores para Raios X/normas , Calibragem/normas , Desenho de Equipamento , Análise de Falha de Equipamento/métodos , Análise de Falha de Equipamento/normas , Garantia da Qualidade dos Cuidados de Saúde/métodos , Garantia da Qualidade dos Cuidados de Saúde/normas , Radiocirurgia/normas , Radioterapia Guiada por Imagem/normas , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , TexasRESUMO
UNLABELLED: Quality assurance (QA) is essential in dental radiography. Digital radiography is becoming more common in dentistry, so it is important that appropriate QA tests are carried out on the digital equipment, including the viewing monitor. The aim of this article is to outline the tests that can be carried out in dental practice. CLINICAL RELEVANCE: Quality assurance for digital equipment is important to ensure consistently high quality images are produced.
Assuntos
Garantia da Qualidade dos Cuidados de Saúde/métodos , Radiografia Dentária Digital/normas , Apresentação de Dados/normas , Odontologia Geral/normas , Humanos , Processamento de Imagem Assistida por Computador/normas , Proteção Radiológica/normas , Intensificação de Imagem Radiográfica/normas , Radiografia Dentária Digital/instrumentação , Radiografia Panorâmica/normas , Padrão de Cuidado/normas , Ecrans Intensificadores para Raios X/normasRESUMO
To evaluate the quality of the radiographic films in Brazil, according to the recommendations of ISO 9236-1, a radiographic images simulator was used. A study of the control of the quality in radiographic films was implemented. With regard to this study, the results of five films of different manufacturers are presented. The characteristic curves for the ISO qualities of 55, 70, 90 and 120 kV are presented. The PTW REX simulator was used to determine the image quality parameters. Film 2 presents problems due to high sensitivity. Film 1 has a higher energy dependence than the other films. Film 5 yields the best results for almost all the sensitometric parameters. In conclusion, existing films in the Brazilian market vary considerably with relation to image quality.
Assuntos
Diagnóstico por Imagem , Intensificação de Imagem Radiográfica/instrumentação , Radiologia/normas , Filme para Raios X/normas , Ecrans Intensificadores para Raios X/normas , Brasil , Simulação por Computador , Humanos , Imagens de Fantasmas , Controle de Qualidade , Doses de Radiação , Intensificação de Imagem Radiográfica/métodosRESUMO
X-ray equipment should be routinely checked for optimal imaging performance and appropriate radiation dose. Recently, the use of diagnostic x-ray equipment with flat panel detectors (FPDs) has increased instead of image intensifier (II) and/or screen film systems. In addition, it is necessary to maintain the performance of FPD systems. Unfortunately, no simple quality control (QC) phantom is available for easy evaluation of FPD image performance. This manuscript suggests a novel simple and inexpensive QC phantom for radiography and fluoroscopy. The authors made a new QC phantom for FPD systems to evaluate the spatial resolution, low-contrast resolution, and dynamic range on single (one-shot) x-ray exposures. The phantom consists of three copper thicknesses (0.5, 1.5, and 3.0 mm), an aluminum stepwedge (0.1-2.7 mm), and piano wire of various diameters (0.08-0.5 mm). They also performed an initial check of the new phantom using a FPD system (fluoroscopic and radiographic images). The new phantom is simple and inexpensive to make. This simple phantom is very useful for QC of FPD systems because a visual evaluation of image performance in three thicknesses of copper (low, intermediate, and high attenuation) is readily available with a single exposure. This simple method for daily checking of FPD systems (radiography and fluoroscopy) using the phantom constitutes an easy way to routinely check image performance and will be useful for QC.
Assuntos
Intensificação de Imagem Radiográfica/normas , Ecrans Intensificadores para Raios X/normas , Humanos , Imagens de Fantasmas , Controle de QualidadeRESUMO
Volumetric-modulated arc therapy (VMAT) is a novel extension of the intensity-modulated radiation therapy (IMRT) technique, which has brought challenges to dose verification. To perform VMAT pretreatment quality assurance, an electronic portal imaging device (EPID) can be applied. This study's aim was to evaluate EPID performance for VMAT dose verification. First, dosimetric characteristics of EPID were investigated. Then 10 selected VMAT dose plans were measured by EPID with the rotational method. The overall variation of EPID dosimetric characteristics was within 1.4% for VMAT. The film system serving as a conventional tool for verification showed good agreement both with EPID measurements ([94.1 ± 1.5]% with 3 mm/3% criteria) and treatment planning system (TPS) calculations ([97.4 ± 2.8]% with 3 mm/3% criteria). In addition, EPID measurements for VMAT presented good agreement with TPS calculations ([99.1 ± 0.6]% with 3 mm/3% criteria). The EPID system performed the robustness of potential error findings in TPS calculations and the delivery system. This study demonstrated that an EPID system can be used as a reliable and efficient quality assurance tool for VMAT dose verification.
Assuntos
Garantia da Qualidade dos Cuidados de Saúde/métodos , Radiometria/instrumentação , Radiometria/normas , Radioterapia de Intensidade Modulada/instrumentação , Radioterapia de Intensidade Modulada/normas , Ecrans Intensificadores para Raios X/normas , Desenho de Equipamento , Análise de Falha de Equipamento , Garantia da Qualidade dos Cuidados de Saúde/normas , Dosagem Radioterapêutica , TaiwanRESUMO
PURPOSE: Timely approval of weekly portal images is essential for quality patient care. Most departments stipulate that portal images should be reviewed within 1 to 2 business days after imaging. The purpose of this study was to compare compliance of reviewing portal images per departmental policy before and after implementing an electronic medical record (EMR). METHODS: The use of an EMR to review portal images was initiated at the investigators' institution in March 2010. Before this, portal images were reviewed on either radiographic film or printouts from machines equipped with electronic portal imaging. The EMR could be accessed remotely by any computer with direct access to the institution's network. Patients selected were those treated by attending physicians present before and after the switch to the EMR. Patients were randomly selected for review of their portal images from 2009 for radiographic film and March to June 2010 for portal images in the EMR. Violations of department policy included unsigned portal images, undated portal images, no date documented when signed by the attending physician, and portal images signed after >1 business day. Violations for each portal image counted only once, even if the portal image had multiple types of violations. RESULTS: A total of 411 portal images were evaluated. Two hundred four radiographic films taken on 22 different patients were hand signed by 6 different attending physicians. Two hundred seven portal images taken on 16 different patients were reviewed via the EMR by the same 6 attending physicians. Twenty-five percent (51 of 204) of portal images reviewed by hand on radiographic films incurred violations, while 1% (2 of 207) of portal images reviewed via the EMR incurred violations. When portal images were reviewed by hand, 16 (8%) did not have the film date documented when taken by the therapists, 2 (1%) did not have documentation of date signed, 16 (8%) were never signed, and 17 (8%) were signed after 1 business day. All violations incurred with the EMR were for films signed after >1 business day. Chi-square analysis showed a significant improvement in compliance with reviewing portal films with the EMR (P < .001). CONCLUSIONS: The use of an EMR for reviewing portal images dramatically improved compliance with timeliness and record keeping. Timeliness of reviewing portal images improves patient care and safety.
Assuntos
Documentação/normas , Registros Eletrônicos de Saúde/normas , Fidelidade a Diretrizes/estatística & dados numéricos , Guias de Prática Clínica como Assunto , Radiologia/normas , Filme para Raios X/normas , Ecrans Intensificadores para Raios X/normas , MichiganRESUMO
BACKGROUND: Reject analysis can be used as a quality indicator, and is an important tool in localizing areas where optimization is required. Reducing number of rejects is important yielding reduced patient exposure and increased cost-effectiveness. PURPOSE: To determine rejection rates and causes in direct digital radiography. MATERIAL AND METHODS: Data were collected during a three-month period in spring 2010 at two direct digital laboratories in Norway. All X-ray examinations, types, numbers, and reasons for rejections were obtained using automatic reject analysis software. Thirteen causes for rejection could be selected. RESULTS: Out of the 27,284 acquired images, 3206 were rejected, yielding an overall rejection rate of 12%. Highest rejection rates were found for examination of knees, shoulders, and wrist. In all, 77% of the rejected images arose from positioning errors. CONCLUSION: An overall rejection rate of 12% indicates a need for optimizing radiographic practice in the department.
Assuntos
Coleta de Dados/métodos , Garantia da Qualidade dos Cuidados de Saúde/métodos , Intensificação de Imagem Radiográfica/normas , Serviço Hospitalar de Radiologia/normas , Filme para Raios X/normas , Ecrans Intensificadores para Raios X/normas , Artefatos , Humanos , Noruega , Posicionamento do Paciente , Estudos Prospectivos , Inquéritos e QuestionáriosRESUMO
In this study, a computer-based system for routine quality assurance (QA) of a linear accelerator (linac) was developed by using the dosimetric properties of an amorphous silicon electronic portal imaging device (EPID). An acrylic template phantom was designed such that it could be placed on the EPID and be aligned with the light field of the collimator. After irradiation, portal images obtained from the EPID were transferred in DICOM format to a computer and analyzed using a program we developed. The symmetry, flatness, field size, and congruence of the light and radiation fields of the photon beams from the linac were verified simultaneously. To validate the QA system, the ion chamber and film (X-Omat V2; Kodak, New York, NY) measurements were compared with the EPID measurements obtained in this study. The EPID measurements agreed with the film measurements. Parameters for beams with energies of 6 MV and 15 MV were obtained daily for 1 month using this system. It was found that our QA tool using EPID could substitute for the film test, which is a time-consuming method for routine QA assessment.
Assuntos
Garantia da Qualidade dos Cuidados de Saúde/normas , Radiometria/instrumentação , Radiometria/normas , Radioterapia Conformacional/instrumentação , Radioterapia Conformacional/normas , Ecrans Intensificadores para Raios X/normas , Desenho de Equipamento , Internacionalidade , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
This study was carried out to assess whether the spatial resolution has an impact on the detection accuracy of proximal caries in flat panel CBCT (cone beam computerized tomography) images and if the detection accuracy can be improved by flat panel CBCT images scanned with high spatial resolution when compared to digital intraoral images. The CBCT test images of 45 non-restored human permanent teeth were respectively scanned with the ProMax 3D and the DCT Pro scanners at different resolutions. Digital images were obtained with a phosphor plate imaging system Digora Optime. Eight observers evaluated all the test images for carious lesion within the 90 proximal surfaces. With the histological examination serving as the reference standard, observer performances were evaluated by receiver operating characteristic (ROC) curves. The areas under the ROC curves were analyzed with two-way analysis of variance. No significant differences were found among the CBCT images and between CBCT and digital images when only proximal enamel caries was detected (p = 0.989). With respect to the detection of proximal dentinal caries, significant difference was found between CBCT and digital images (p < 0.001) but not among CBCT images. The spatial resolution did not have an impact on the detection accuracy of proximal caries in flat panel CBCT images. The flat panel CBCT images scanned with high spatial resolution did not improve the detection accuracy of proximal enamel caries compared to digital intraoral images. CBCT images scanned with high spatial resolutions could not be used for proximal caries detection.
Assuntos
Tomografia Computadorizada de Feixe Cônico/normas , Cárie Dentária/diagnóstico por imagem , Processamento de Imagem Assistida por Computador/normas , Radiografia Dentária Digital/normas , Área Sob a Curva , Tomografia Computadorizada de Feixe Cônico/instrumentação , Cárie Dentária/patologia , Esmalte Dentário/diagnóstico por imagem , Esmalte Dentário/patologia , Polpa Dentária/diagnóstico por imagem , Polpa Dentária/patologia , Dentina/diagnóstico por imagem , Dentina/patologia , Humanos , Variações Dependentes do Observador , Curva ROC , Intensificação de Imagem Radiográfica/normas , Radiografia Dentária Digital/instrumentação , Padrões de Referência , Software , Colo do Dente/diagnóstico por imagem , Colo do Dente/patologia , Coroa do Dente/diagnóstico por imagem , Coroa do Dente/patologia , Desmineralização do Dente/diagnóstico por imagem , Desmineralização do Dente/patologia , Descoloração de Dente/diagnóstico por imagem , Descoloração de Dente/patologia , Ecrans Intensificadores para Raios X/normasRESUMO
BACKGROUND: Flat-panel computed tomography (FpCT) provides better spatial resolution than 64-channel CT (64-CT) and may improve in vivo quantitative assessment of atherosclerotic plaques. METHODS AND RESULTS: Lesions in 184 aortic histology sections from 6 Watanabe heritable hyperlipidemic rabbits were quantitatively compared with 64-CT (image thickness, 0.625 mm) and FpCT (image thickness, 0.150 mm) images. Images were re-oriented perpendicular to the vessel centerline. For detecting plaque, FpCT and 64-CT were not significantly different (sensitivity, 76% vs 66%; P=NS). Although FpCT was significantly more sensitive (42% vs 0%; P=<0.001) for detecting eccentric lesions, the area under the curve (AUC) for FpCT (0.6) was not significantly different from that for 64-CT (0.45; P=NS). In detecting plaques with ≤ 10% lipid (low attenuation foci), FpCT was significantly more sensitive than 64-CT (24% vs 0.7%; P<0.00) and had a significantly greater AUC (0.6 vs 0.5; P<0.006). Additionally, FpCT was more sensitive (65% vs 0%; P<0.00) in detecting plaques with ≤ 5% calcium (high attenuation foci) but not in detecting branch points. Both FpCT and histology allowed us to detect low-attenuation foci as small as 0.3mm in diameter, whereas 64-CT allowed us to detect only low-attenuation foci ≥ 1.5mm in diameter. CONCLUSIONS: Flat-panel CT seemed to have more potential for quantitatively screening low-risk small atherosclerotic lesions, whereas 64-CT was apparently more useful when imaging established, well-characterized lesions, particularly when measuring the vascular wall thickness in a rabbit model of atherosclerosis.
Assuntos
Aortografia/normas , Placa Aterosclerótica/diagnóstico por imagem , Tomografia Computadorizada por Raios X/normas , Ecrans Intensificadores para Raios X/normas , Animais , Aorta/patologia , Aortografia/métodos , Hiperlipidemias/complicações , Hiperlipidemias/diagnóstico por imagem , Placa Aterosclerótica/etiologia , Coelhos , Tomografia Computadorizada por Raios X/métodosRESUMO
BACKGROUND AND OBJECTIVE: Digital photo stimulable phosphor (PSP)-based radiography has many known theoretical advantages over conventional film radiography but its diagnostic efficacy has to be assessed clinically. This study compared the efficiency of conventional film-based panoramic radiographs with that of digital PSP-based panoramic radiographs in the assessment of position and morphology of impacted mandibular third molars. MATERIALS AND METHODS: We selected a total of 80 impacted mandibular third molars that fulfilled the inclusion and exclusion criteria of this study. Both conventional film-based panoramic radiographs and digital PSP-based panoramic radiographs were taken of all the study samples and the teeth were later surgically removed. Conventional film-based and digital PSP-based panoramic radiographs were compared for their relative efficiencies in the assessment of impaction status, position of tooth, number of roots, root morphology, and proximity to mandibular canal of impacted mandibular third molars. An oral surgeon graded these same factors during/after surgical exploration and this assessment was considered the gold standard. The data obtained were statistically analyzed using descriptive statistics, chi-square test, and McNemar's test. RESULTS: There was no statistically significant difference between conventional film-based radiographic assessment and digital PSP-based panoramic radiographic assessment of impaction status, position of tooth, number of roots, and proximity to mandibular canal of impacted mandibular third molars (P>0.05). However, there was significant difference between the two methods with regard to assessment of root morphology of impacted mandibular third molars (P=0.00). INTERPRETATION AND CONCLUSION: Conventional film-based panoramic radiographs and digital PSP-based panoramic radiographs were comparable in their accuracy in the preoperative study of impacted mandibular third molar with regard to impaction status, tooth position, number of roots, and proximity to the mandibular canal. Digital PSP-based panoramic radiographs were more accurate than conventional film-based panoramic radiographs in the assessment of root morphology of impacted mandibular third molars. Hence, we conclude that digital PSP-based panoramic radiographs can be used as an effective alternative to conventional film-based panoramic radiographs for assessment of position and morphology of impacted mandibular third molars.
Assuntos
Mandíbula/diagnóstico por imagem , Dente Serotino/diagnóstico por imagem , Radiografia Dentária Digital/normas , Radiografia Panorâmica/normas , Dente Impactado/diagnóstico por imagem , Filme para Raios X/normas , Adulto , Arco Dental/diagnóstico por imagem , Feminino , Humanos , Masculino , Nervo Mandibular/diagnóstico por imagem , Dente Serotino/cirurgia , Raiz Dentária/diagnóstico por imagem , Dente Impactado/cirurgia , Ecrans Intensificadores para Raios X/normas , Adulto JovemRESUMO
PURPOSE: The conditions under which vendor performance criteria for digital radiography systems are obtained do not adequately simulate the conditions of actual clinical imaging with respect to radiographic technique factors, scatter production, and scatter control. Therefore, the relationship between performance under ideal conditions and performance in clinical practice remains unclear. Using data from a large complement of systems in clinical use, the authors sought to develop a method to establish expected performance criteria for digital flat-panel radiography systems with respect to signal-to-noise ratio (SNR) versus detector exposure under clinical conditions for thoracic imaging. METHODS: The authors made radiographic exposures of a patient-equivalent chest phantom at 125 kVp and 180 cm source-to-image distance. The mAs value was modified to produce exposures above and below the mAs delivered by automatic exposure control. Exposures measured free-in-air were corrected to the imaging plane by the inverse square law, by the attenuation factor of the phantom, and by the Bucky factor of the grid for the phantom, geometry, and kilovolt peak. SNR was evaluated as the ratio of the mean to the standard deviation (SD) of a region of interest automatically selected in the center of each unprocessed image. Data were acquired from 18 systems, 14 of which were tested both before and after gain and offset calibration. SNR as a function of detector exposure was interpolated using a double logarithmic function to stratify the data into groups of 0.2, 0.5, 1.0, 2.0, and 5.0 mR exposure (1.8, 4.5, 9.0, 18, and 45 microGy air KERMA) to the detector. RESULTS: The mean SNR at each exposure interval after calibration exhibited linear dependence on the mean SNR before calibration (r2=0.9999). The dependence was greater than unity (m = 1.101 +/- 0.006), and the difference from unity was statistically significant (p <0.005). The SD of mean SNR after calibration also exhibited linear dependence on the SD of the mean SNR before calibration (r2 = 0.9997). This dependence was less than unity (m = 0.822 +/- 0.008), and the difference from unity was also statistically significant (p < 0.005). Systems were separated into two groups: systems with a precalibration SNR higher than the median SNR (N = 7), and those with a precalibration SNR lower than the median SNR (N= 7). Posthoc analysis was performed to correct for expanded false positive results. After calibration, the authors noted differences in mean SNR within both high and low groups, but these differences were not statistically significant at the 0.05 level. SNR data from four additional systems and one system from those previously tested after replacement of its detector were compared to the 95% confidence intervals (CI) calculated from the postcalibration SNR data. The comparison indicated that four of these five systems were consistent with the CI derived from the previously tested 14 systems after calibration. Two systems from the paired group that remained outside the CI were studied further. One system was remedied with a grid replacement. The nonconformant behavior of the other system was corrected by replacing the image receptor. CONCLUSIONS: Exposure-dependent SNR measurements under conditions simulating thoracic imaging allowed us to develop criteria for digital flat-panel imaging systems from a single manufacturer. These measurements were useful in identifying systems with discrepant performance, including one with a defective grid, one with a defective detector, and one that had not been calibrated for gain and offset. The authors also found that the gain and offset calibration reduces variation in exposure-dependent SNR performance among the systems.
Assuntos
Artefatos , Intensificação de Imagem Radiográfica/instrumentação , Intensificação de Imagem Radiográfica/normas , Ecrans Intensificadores para Raios X/normas , Calibragem , Análise de Falha de Equipamento , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , TexasRESUMO
The purpose of this study was to evaluate image quality, to determine the reject film rate in conventional radiology procedures and to determine the causes of defects on the films. Rejected films were collected in four main hospitals in Iran and five routine examinations were considered. The rejected films were analysed and assigned to five different categories. There was a significant reduction in the overall film reject rate for all examinations investigated from 17.6 to 11.4 % when a quality assurance (QA) programme was implemented. The major reasons for rejection of films were over- or under-exposure and processing problems. The study showed the importance of a QA programme in order to deliver high-quality health service to patients.
Assuntos
Processamento de Imagem Assistida por Computador/normas , Guias de Prática Clínica como Assunto , Garantia da Qualidade dos Cuidados de Saúde , Radiografia/normas , Serviço Hospitalar de Radiologia/normas , Ecrans Intensificadores para Raios X/normas , Humanos , Irã (Geográfico) , Controle de Qualidade , Intensificação de Imagem Radiográfica , Radiografia/métodosRESUMO
The PTW REX phantom was used to study the radiographic image quality parameters in X-ray devices in the X-ray Diagnostics Department, as well as the system of film processing at the University Hospital of Rio de Janeiro State. X-ray devices were evaluated by performing tests on 11 screen-film combinations from X-ray devices in 3 rooms. The results showed that six film-screen combinations exhibited poor performances. For determination of air kerma output in the X-ray field, two devices presented significant variation >2 %. The grid attenuation factor in three devices had been approved, while two films were within the limits of sensitometric specifications. The modulation transfer function, which evaluates the level of image degradation, revealed that five film-screen combinations exhibited bad performance. The tests with the REX phantom revealed that the X-ray equipment and the system of processing at the University Hospital presented discrepancies in relation to the expected values, contributing to loss of quality of the radiographs.
Assuntos
Controle de Qualidade , Intensificação de Imagem Radiográfica/instrumentação , Filme para Raios X/normas , Ecrans Intensificadores para Raios X/normas , Simulação por Computador , Humanos , Modelos Estruturais , Imagens de Fantasmas , Doses de Radiação , Intensificação de Imagem Radiográfica/métodosRESUMO
Image guided radiation therapy solutions based on megavoltage computed tomography (MVCT) involve the extension of electronic portal imaging devices (EPIDs) from their traditional role of weekly localization imaging and planar dose mapping to volumetric imaging for 3D setup and dose verification. To sustain the potential advantages of MVCT, EPIDs are required to provide improved levels of portal image quality. Therefore, it is vital that the performance of EPIDs in clinical use is maintained at an optimal level through regular and rigorous quality assurance (QA). Traditionally, portal imaging QA has been carried out by imaging calibrated line-pair and contrast resolution phantoms and obtaining arbitrarily defined QA indices that are usually dependent on imaging conditions and merely indicate relative trends in imaging performance. They are not adequately sensitive to all aspects of image quality unlike fundamental imaging metrics such as the modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE) that are widely used to characterize detector performance in radiographic imaging and would be ideal for QA purposes. However, due to the difficulty of performing conventional MTF measurements, they have not been used for routine clinical QA. The authors present a simple and quick QA methodology based on obtaining the MTF, NPS, and DQE of a megavoltage imager by imaging standard open fields and a bar-pattern QA phantom containing 2 mm thick tungsten line-pair bar resolution targets. Our bar-pattern based MTF measurement features a novel zero-frequency normalization scheme that eliminates normalization errors typically associated with traditional bar-pattern measurements at megavoltage x-ray energies. The bar-pattern QA phantom and open-field images are used in conjunction with an automated image analysis algorithm that quickly computes the MTF, NPS, and DQE of an EPID system. Our approach combines the fundamental advantages of linear systems metrics such as robustness, sensitivity across the full spatial frequency range of interest, and normalization to imaging conditions (magnification, system gain settings, and exposure), with the simplicity, ease, and speed of traditional phantom imaging. The algorithm was analyzed for accuracy and sensitivity by comparing with a commercial portal imaging QA method (PIPSPRO, Standard Imaging, Middleton, WI) on both first-generation lens-coupled and modern a-Si flat-panel based clinical EPID systems. The bar-pattern based QA measurements were found to be far more sensitive to even small levels of degradation in spatial resolution and noise. The bar-pattern based QA methodology offers a comprehensive image quality assessment tool suitable for both commissioning and routine EPID QA.