RESUMO
In the last few decades, there has been an increasing trend for the usage of natural products and their derivatives as green and renewable oil-filed chemicals. Use of these compounds or their derivatives contributes to reducing the use of traditional chemicals, and enhances green chemistry principles. Curcumin (CRC) is one of the most popular natural products and is widely available. The green character, antioxidant action, and low cost of CRC prompt its use in several applications. In the present study, Curcumin was used to synthesize two new amphiphilic ionic liquids (AILs) by reacting with 1,3-propanesultone or bromoacetic acid to produce corresponding sulfonic and carboxylic acids, CRC-PS and CRC-BA, respectively. Following this, the formed CRC-PS and CRC-BA were allowed to react with 12-(2-hydroxyethyl)-15-(4-nonylphenoxy)-3,6,9-trioxa-12-azapentadecane-1,14-diol (HNTA) to form corresponding AILs, GCP-IL and GRB-IL, respectively. The chemical structures, surface tension, interfacial tension, and relative solubility number (RSN) of the synthesized AILs were investigated. The efficiency of GCP-IL and GRB-IL to demulsify water in heavy crude oil (W/O) emulsions was also investigated, where we observed that both GCP-IL and GRB-IL served as high-efficiency demulsifiers and the efficiency increased with a decreased ratio of water in W/O emulsion. Moreover, the data showed an increased efficiency of these AILs with an increased concentration. Among the two AILs, under testing conditions, GCP-IL exhibited a higher efficiency, shorter demulsification time, and cleaner demulsified water.
Assuntos
Curcumina/análogos & derivados , Emulsificantes/síntese química , Emulsões/química , Líquidos Iônicos/química , Óleos/química , Purificação da Água/métodos , Curcumina/síntese química , Interações Hidrofóbicas e Hidrofílicas , TensoativosRESUMO
Pectin is widely used in food and pharmaceutical industries. However, due to its polysaccharide nature it lacks antimicrobial activity. In the current work, new pectin derivatives with interesting optical and antimicrobial properties were prepared via supramolecular chemistry utilizing Fe- or Cu-terpyridine (Tpy-Fe and Tpy-Cu) motifs. To proof derivatization of pectin, ultraviolet-visible spectroscopy (UV-Vis) and Fourier Transform infrared (FTIR) were used. In addition, the prepared pectin derivatives retained the known emulsification activity of the non-modified sugar beet pectin as seen from the particle size analysis of oil-in-water emulsions. The prepared derivatives showed antibacterial activity toward selected Gram-positive and Gram-negative bacteria. In addition, cytotoxicity test showed that the Tpy-Fe-pectin derivative was non-toxic to cells of human hepatocarcinoma, breast adenocarcinoma MCF7, and colorectal carcinoma cells at concentrations up to 100 µg/ml, while Tpy-Cu-pectin had moderate toxicity toward the aforementioned cells at the same concentration levels. The prepared derivatives could have potential applications in emulsions with antibacterial activity.
Assuntos
Antibacterianos/farmacologia , Complexos de Coordenação/farmacologia , Emulsificantes/farmacologia , Pectinas/farmacologia , Piridinas/farmacologia , Antibacterianos/síntese química , Antibacterianos/toxicidade , Beta vulgaris/química , Linhagem Celular Tumoral , Complexos de Coordenação/síntese química , Complexos de Coordenação/toxicidade , Cobre/química , Cobre/toxicidade , Emulsificantes/síntese química , Emulsificantes/toxicidade , Escherichia coli/efeitos dos fármacos , Humanos , Ferro/química , Ferro/toxicidade , Ligantes , Testes de Sensibilidade Microbiana , Pectinas/síntese química , Pectinas/toxicidade , Piridinas/síntese química , Piridinas/toxicidade , Staphylococcus aureus/efeitos dos fármacosRESUMO
Erythorbyl myristate (EM), a potential multi-functional food emulsifier, was newly synthesized by immobilized lipase-catalyzed esterification between antioxidative erythorbic acid and antibacterial myristic acid. The yield and productivity of EM were 56.13 ± 2.51 mg EM/g myristic acid and 1.76 ± 0.08 mM/h, respectively. The molecular structure of EM was identified as (R)-2-((R)-3,4-dihydroxy-5-oxo-2,5-dihydrofuran-2-yl)-2-hydroxyethyl tetradecanoate using HPLC-ESI/MS and 2D [1H-1H] NMR COSY. The hydrophilic-lipophilic balance of EM was 11.5, suggesting that EM could be proper to stabilize oil-in-water emulsions. Moreover, isothermal titration calorimetry demonstrated the micellar thermodynamic behavior of EM and determined its critical micelle concentration (0.36 mM). In terms of antioxidative property, EM exhibited the radical scavenging activity against DPPH (EC50: 35.47 ± 0.13 µM) and ABTS (EC50: 36.45 ± 1.98 µM) radicals. Finally, EM showed bacteriostatic and bactericidal activities against Gram-positive foodborne pathogens (minimum inhibitory concentration: 0.06-0.60 mM; minimum bactericidal concentration: 0.07-0.93 mM).
Assuntos
Ácido Ascórbico/química , Emulsificantes/química , Emulsificantes/farmacologia , Ácido Mirístico/química , Antibacterianos/química , Antibacterianos/farmacologia , Antioxidantes/química , Antioxidantes/farmacologia , Cromatografia Líquida de Alta Pressão , Emulsificantes/síntese química , Esterificação , Microbiologia de Alimentos , Alimento Funcional , Lipase/química , Lipase/metabolismo , Espectroscopia de Ressonância Magnética , Testes de Sensibilidade Microbiana , Estrutura Molecular , Espectrometria de Massas por Ionização por Electrospray , Estereoisomerismo , TermodinâmicaRESUMO
A novel maltoheptaose-palmitate ester (G7-PA) was synthesized and investigated for emulsion properties. First of all, the optimal conditions for lipase-catalyzed G7-PA synthesis, which were 0.2 of the G7/PA molar ratio, 33.5 U of immobilized CALB per 1 g of PA in 10% DMSO, were determined by response surface methodology. G7-PA was compared with the commercial sucrose-PA (S-PA) in terms of emulsion-forming ability and stability at extreme conditions. At the 0.1% surfactant concentration, G7-PA emulsion exhibited a droplet distribution similar to the 0.2% surfactant condition, while S-PA emulsion was quickly destabilized. G7-PA showed better emulsifying properties than the S-PA at the acidic condition (pH 3). Flocculation and phase separation was observed at the S-PA emulsion, but the G7-PA emulsion was stable for 7-day. In thermostability tests, G7-PA and S-PA both were stable up to the boiling temperature. Conclusively, G7-PA exhibits excellent properties as a biosurfactant in O/W emulsion compared with S-PA.
Assuntos
Biocatálise , Emulsificantes/química , Emulsificantes/síntese química , Ésteres/química , Glucanos/química , Glucanos/síntese química , Lipase/metabolismo , Técnicas de Química SintéticaRESUMO
To enhance the dissolution and oral bioavailability of telmisartan (TMS), a poorly water-soluble anti-hypertensive drug, a supersaturable self-microemulsifying drug delivery system (SuSMEDDS) was developed. Amorphous alkalinized TMS (AAT) was formulated into a SMEDDS, composed of Capmul® MCM (oil), Cremophor® RH40 (surfactant), and tetraglycol (co-surfactant). Although the SMEDDS was rapidly dissolved (>80% within 5 min) in a limited condition (500 mL, pH 6.8), drug precipitation was observed over time, resulting in a decrease in dissolution levels. The precipitation was due to drug recrystallization, as determined by differential scanning calorimetry and powder X-ray diffraction analyses. Several polymers, including Soluplus® (SOL), were screened as precipitation inhibitors; ultimately, SuSMEDDS-SOL was prepared by admixing SOL and the SMEDDS at a 5:100 (w/w) ratio. SuSMEDDS-SOL was superior in terms of dissolution efficiency (>90% over 2 h) and dissolution-retaining time (no precipitation over 2 h). An in vivo pharmacokinetic study in rats revealed that the oral bioavailability of SuSMEDDS-SOL was 4.8-, 1.3-, and 1.2-fold greater than those of the TMS suspension, AAT solution, and SMEDDS, respectively. Therefore, SuSMEDDS-SOL is a promising candidate to enhance the dissolution and oral bioavailability of TMS.
Assuntos
Anti-Hipertensivos/sangue , Anti-Hipertensivos/síntese química , Sistemas de Liberação de Medicamentos/métodos , Emulsificantes/sangue , Emulsificantes/síntese química , Telmisartan/sangue , Telmisartan/síntese química , Administração Oral , Animais , Anti-Hipertensivos/administração & dosagem , Disponibilidade Biológica , Emulsificantes/administração & dosagem , Masculino , Ratos , Ratos Sprague-Dawley , Solubilidade , Telmisartan/administração & dosagemRESUMO
Developing green and smart emulsifier for multiple responsive Pickering emulsion has been a great significance to many industries. Therefore, a novel emulsifier, poly (N-isopropylacrylamide) (PNIPAM) grafted chitosan (CS) microgel (CS-g-PNIPAM), was obtained, which exhibited swelling and deswelling behaviors in response to abrupt changes of pH and temperature. The resulting O/W Pickering emulsion was also sensitive to pH and temperature, and adjusting either the pH from 5.0 to 9.0 or temperature from 25 to 45 â could effectively trigger oil-water separation and emulsification on demand. Based on it, a biphasic biocatalysis was applied to evaluate the catalytic capacity of this approach. The hydrolysis of fish oil and esterification of oleic acid with n-octanol were performed successfully. Meanwhile, the easy separation of products and good recyclability could be realized by reversibly increasing or decreasing temperature. The green system provides a great potential for the application of biopolymers in biphasic interfacial biocatalysis.
Assuntos
Resinas Acrílicas/química , Biocatálise , Emulsificantes , Microgéis/química , Quitosana/química , Emulsificantes/síntese química , Emulsificantes/química , Emulsões , Concentração de Íons de Hidrogênio , TemperaturaRESUMO
AIM: It was the aim of this study to synthesize a phosphorylated emulsifier possessing a PEG-linker for establishment of a potent zeta potential changing system in self-emulsifying drug delivery systems (SEDDS). METHODS: N,N'-Bis(polyoxyethylene)oleylamine (POA) was phosphorylated utilizing pyrophosphoric acid. Successful synthesis of POA bisphosphate (POAP) was confirmed by NMR and HR CS MAS. After incorporation of 1% POAP into SEDDS (Kolliphor RH 40, Capmul PG-8, Labrafac Lipophile WL 1349, Labrafac PG; 30/20/20/30, v/v), according emulsions were incubated with intestinal alkaline phosphatase (IAP) and the zeta potential was measured. Additionally, the amount of released phosphate upon incubation with IAP or on Caco-2 cells was quantified by malachite green assay. Finally, cell viability studies on Caco-2 cells were performed and mucus permeation properties with and without IAP preincubation were assessed. RESULTS: POAP was synthesized as brown viscous liquid with a yield of 36% and could be incorporated into SEDDS. By incubation with IAP a zeta potential shift from -15.1 to 6.5â¯mV was observed. A corresponding phosphate release in presence of isolated IAP as well as on Caco-2 cells was found. Assessment of the cytotoxic potential revealed no significant alteration in the safety profile of SEDDS by incorporation of POAP. Mucus permeation studies exposed a 2-fold higher permeation of fluorescein diacetate (FDA) having been embedded in SEDDS loaded with POAP in comparison to blank formulation and 3-fold higher permeability than for emulsions having been preincubated with phosphatase. CONCLUSION: The novel phosphorylated surfactant exhibiting a PEG-linker facilitated a potent zeta potential change of SEDDS.
Assuntos
Difosfatos/síntese química , Portadores de Fármacos , Emulsificantes/síntese química , Polietilenoglicóis/síntese química , Fosfatase Alcalina/metabolismo , Células CACO-2 , Composição de Medicamentos , Emulsões , Proteínas Ligadas por GPI/metabolismo , Humanos , Absorção Intestinal , Mucosa Intestinal/enzimologia , Permeabilidade , Fosfatos/metabolismo , Fosforilação , Propriedades de SuperfícieRESUMO
Senicapoc (SEN), a potent antisickling agent, shows poor water solubility and poor oral bioavailability. To improve the solubility and cell permeation of SEN, self-nanoemulsifying drug delivery systems (SNEDDSs) were developed. Capryol PGMC®, which showed the highest solubilization capacity, was selected as the oil. The self-emulsification ability of two surfactants, viz., Cremophor-EL® and Tween® 80, was compared. Based on a solubility study and ternary phase diagrams, three optimized nanoemulsions with droplet sizes less than 200 nm were prepared. An in vitro dissolution study demonstrated the superior performance of the SNEDDS over the free drug. During in vitro lipolysis, 80% of SEN loaded in the SNEDDS remained solubilized. An in vitro cytotoxicity study using the Caco-2 cell line indicated the safety of the formulations at 1 mg/mL. The transport of SEN-SNEDDSs across Caco-2 monolayers was enhanced 115-fold (p < 0.01) compared to that of the free drug. According to these results, SNEDDS formulations could be promising tools for the oral delivery of SEN.
Assuntos
Acetamidas/síntese química , Sistemas de Liberação de Medicamentos/métodos , Desenho de Fármacos , Emulsificantes/síntese química , Canais de Potássio Ativados por Cálcio de Condutância Intermediária/antagonistas & inibidores , Compostos de Tritil/síntese química , Acetamidas/farmacocinética , Células CACO-2 , Sobrevivência Celular/efeitos dos fármacos , Sobrevivência Celular/fisiologia , Relação Dose-Resposta a Droga , Avaliação Pré-Clínica de Medicamentos/métodos , Emulsificantes/farmacocinética , Humanos , Canais de Potássio Ativados por Cálcio de Condutância Intermediária/fisiologia , Solubilidade , Compostos de Tritil/farmacocinéticaRESUMO
The aim of this work was to identify stable topical platform cream formulations (placebo creams without active drug substance) using the quality attributes of cream consistency, droplet size distribution (<1 µm), and separation or instability index of <0.1 to accelerate the development of topical cream drug product. The formulations were developed with six emulsifier systems that were screened in three different solvent systems across a range of emulsifier ratios. Each formulation was characterized by microscopy, separation index, and consistency. The results showed that there are three emulsifier combination (PEG 40 stearate:GMS, S21:S2, and PEG 40 stearate:Span 60) that works well with the solvent systems. Platform cream formulations F4, F15, F33, F40, F52, F69, F77, F87, and F106 were found to meet the three criteria for a long-term stable platform cream formulation. Formulation development for topical administered drug product can be very time consuming, expensive, and resourceful in identifying a chemically and physically stable product. In early development, where it can take 1-2 years to develop a first time in human (FTIH) formulation for a new chemical entity. The use of the platform base cream formulations will expedite the early development timeline for new chemical entity by 3-6 months.
Assuntos
Química Farmacêutica/métodos , Composição de Medicamentos/métodos , Desenvolvimento de Medicamentos/métodos , Creme para a Pele/síntese química , Administração Tópica , Emulsificantes/administração & dosagem , Emulsificantes/síntese química , Creme para a Pele/administração & dosagemRESUMO
The xylitol ester of hydrogenated rosin (XEHR) was obtained for the first time from biomass-based hydrogenated rosin and xylitol using an environmentally friendly, high-pressure CO2 catalytic synthesis. This compound is intended for use as an emulsifier for food. Analyses by ICP-AES showed the absence of heavy metal residues in the product, such that it met food standards. Fourier transform infrared and nuclear magnetic resonance spectroscopies together with gel permeation chromatography confirmed the successful esterification and the formation of a monoester and diester with molar masses of 427 and 772 g/mol. The emulsification of water/soybean oil mixtures by adding the XEHR was assessed at pH values of 4, 6.86, and 10 and in the presence of NaCl, KCl, MgCl2, and CaCl2. The XEHR was found to act as an emulsifier by reducing the interfacial tension of such mixtures to less than 2 mN/m under all conditions. The highest emulsifying activity index (9.52 m2/g) and emulsifying stability index (94.53%) were obtained after adding MgCl2 (100 mM). Particle size and confocal microscopy showed that the presence of salts gave a more uniform droplet size and a finer emulsion structure. The high viscosities of the emulsions containing salts also suggested a more cohesive oil droplet network.
Assuntos
Emulsificantes/síntese química , Ésteres/química , Aditivos Alimentares/síntese química , Resinas Vegetais/química , Xilitol/química , Biomassa , Dióxido de Carbono/química , Emulsificantes/análise , Ésteres/análise , Aditivos Alimentares/análise , Humanos , Concentração de Íons de Hidrogênio , Hidrogenação , Cloreto de Magnésio/química , Tamanho da Partícula , Pressão , Óleo de Soja/química , Tensão Superficial , Água/química , Xilitol/análiseRESUMO
This study aimed to investigate the highly selective production of monolaurin via enzymatic transesterification of methyl laurate and glycerol. It was determined that a binary solvent system (tert-butanol/iso-propanol, 20:80, wt./wt.) was suitable for the enzymatic production of monolaurin, especially in the continuous process. The highest mass fraction of monolaurin in the product mixture (80.8 wt.%) was achieved in a batch mode under the following conditions: a methyl laurate-to-glycerol molar ratio of 1:6, a substrate concentration (methyl laurate in the binary solvent) of 15 wt.%, an enzyme dosage of 6 wt.% of the amount of methyl laurate, and a reaction time of 1.5 h at 50°C. Compared with the results under the batch conditions, a slightly higher yield of monolaurin (82.5 ± 2.5 wt.%) was obtained in a continuous flow system at a flow rate of 0.1 mL/min, while the mass fraction of dilaurin in the product mixture was only 0.7 ± 0.6 wt.%. In addition, the yield of monolaurin remained almost unchanged during the 18 tested days of the continuous experiment.
Assuntos
Emulsificantes/síntese química , Lauratos/síntese química , Monoglicerídeos/síntese química , 1-Propanol , Esterificação , Glicerol/química , Lauratos/química , Solventes , Temperatura , Fatores de Tempo , terc-Butil ÁlcoolRESUMO
HYPOTHESIS: The development of functional and nutritional surfactants for the food industry remains a subject of great interest. Herein, therefore, we report on the design and synthesis of novel trisaccharide (raffinose) monoester-based surfactants in the expectation that they would display functional properties superior to certain disaccharide-based, commercially-deployed emulsifiers and thus have potential for industrial applications. EXPERIMENTS: The title esters were prepared by enzymatic methods and their properties as surfactants evaluated through determination of their HLB values, water solubilities, CMCs, foamabilities and foaming stabilities as well as through investigation of their impacts on the stability of oil-in-water emulsions over a range of storage times and under certain other conditions. FINDINGS: The emulsifying properties of 6-O-acylraffinose esters are dictated, in large part, by the length of the associated alkyl chains. The results of storage and environmental stress experiments revealed that the increasing length of alkyl chains enhances the stability of the derived emulsions. All the raffinose ester-stabilized oil-in-water emulsions displayed stratification effects under strongly acidic conditions (pHâ¯≤â¯4) or at high ionic strength (≥300â¯mM) while possessing reasonable resistance to variations in temperature. As such, a number of the raffinose monoesters showed greater stability to environmental stress than their commercially-deployed and sucrose-based counterparts. The structure-property profiles established through the present study provide a definitive guide for the development of raffinose esters as novel emulsifiers, particularly in the food industry.
Assuntos
Emulsificantes , Ácidos Graxos/química , Lipase/química , Rafinose/química , Emulsificantes/síntese química , Emulsificantes/química , Ésteres/síntese química , Ésteres/química , Estrutura MolecularRESUMO
4-Amion-2,2,6,6-tetramethylpiperidine (Temp) was grafted into sodium lignosulfonate (SL) to obtain hindered amine-modified lignosulfonate (SL-Temp). Then, the polymer surfactant (SL-Temp-CTAB) was prepared using cetyltrimethylammonium bromide (CTAB) and SL-Temp. Obtained SL-Temp-CTAB was used as an emulsifier to prepare a green emulsifiable concentrate (EC) of avermectin (AVM), which shows good emulsifying property and storage stability. The prepared AVM green EC can form AVM-loaded microspheres with nanometer particle size distribution after emulsification in water. After ultraviolet irradiation for 70 h, the AVM retention rate of the green EC prepared using SL-Temp-CTAB was 75.8%, which is much higher than that of commercial EC (0.4%) and the green EC prepared using unmodified SL (31.4%). Moreover, the AVM green EC prepared using SL-Temp-CTAB has slow-release performance, and the release equilibrium time is 5.3 times the commercial EC. Therefore, the newly prepared AVM green EC using a lignin-based functional emulsifier shows good antiphotolysis and slow-release performance compared to the traditional EC.
Assuntos
Aminas/química , Emulsificantes/síntese química , Lignina/química , Cetrimônio/química , Emulsificantes/química , Emulsões/química , Cinética , Lignina/análogos & derivados , Espectroscopia de Ressonância Magnética , Tamanho da Partícula , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
In this study, maltoheptaose (G7)-based sugar esters were synthesized from maltoheptaose and fatty acids (C10-C16) using a commercial lipase. With the exception of dimethyl sulfoxide (DMSO; 76.4%, w/v), G7 showed only limited solubility in organic solvents. Among the fatty acids, palmitic acid (PA) was the best substrate for G7-based ester formation. G7-PA ester was successfully synthesized as the monoester structure exclusively in 10% DMSO of t-butanol with a 22% conversion yield. NMR and enzymatic analyses of the purified monoester product revealed that the ester bond in the G7 was located at C-6 of the glucose at the reducing end. The G7-PA monoester showed the melting temperature at 56.3 °C that was 6.5 °C lower than that of the free PA and exhibited a different endothermic pattern from the free G7. The G7-PA monoester exhibited excellent emulsifier potential with more even droplet size distribution compared with the commercial sucrose esters for an oil-in-water emulsion system.
Assuntos
Hidrolases de Éster Carboxílico/química , Ésteres/química , Proteínas Fúngicas/química , Glucanos/química , Candida/enzimologia , Emulsificantes/síntese química , Emulsificantes/química , Emulsões , Esterificação , Ésteres/síntese química , Ácidos Graxos/química , Glucanos/síntese química , Solubilidade , Temperatura de TransiçãoRESUMO
Nosocomial infections are a major problem in medical health care. To solve this problem, a series of antimicrobial waterborne paints were prepared by using antimicrobial hyperbranched (HB) emulsifiers. The HB-emulsifiers were prepared by polymerizing AB2 monomers obtained in a one-step reaction of bis(hexamethylene)triamine and carbonyl biscaprolactam. The blocked isocyanate end groups (B groups) of the HB-polymer were utilized to introduce tertiary amino groups through the reaction with compounds comprising either a hydroxyl or a primary amino group and a tertiary amino group. Quaternization of the tertiary amines with 6 different alkyl bromides resulted in 12 amphiphilic cationic species. The 12 emulsifiers showed the successful inhibition and killing of 8 bacterial and 2 fungal strains. The killing efficacy increased with increasing alkyl chain length. The octyl-functionalized compound was chosen for suspension polymerizations because of the good compromise between killing and emulsifying properties. With this emulsifier, aqueous poly(methacrylate) suspensions were prepared, which were stable and had excellent killing properties.
Assuntos
Antibacterianos/farmacologia , Emulsificantes/farmacologia , Pintura , Acinetobacter baumannii/efeitos dos fármacos , Antibacterianos/síntese química , Antibacterianos/química , Candida albicans/efeitos dos fármacos , Candida parapsilosis/efeitos dos fármacos , Emulsificantes/síntese química , Emulsificantes/química , Testes de Sensibilidade Microbiana , Estrutura Molecular , Staphylococcus/efeitos dos fármacosRESUMO
Rebamipide has low oral bioavailability (10%) due to its low solubility and permeability. Lipid nanoemulsions (LNEs) were prepared in order to improve its oral bioavailability. Rebamipide-loaded lipid nanoemulsions were formulated by hot homogenization and ultrasonication method. Olive oil and egg lecithin in various concentrations as emulsifier were used in the preparation of LNEs. The lipid nanoemulsions were evaluated for various parameters. The globule size, polydispersity index (PDI), and zeta potential (ZP) of the formulations ranged from 230.3 ± 3.88 to 279.8 ± 5.76 nm, 0.204 ± 0.008 to 0.246 ± 0.029, and - 27.7 ± 2.05 to - 31.0 ± 1.87 mV, respectively. Entrapment efficiency and assay values ranged from 99.90 ± 0.006 to 99.92 ± 0.002% and 99.3 ± 0.808 to 99.6 ± 0.360, respectively. Physical stability test results revealed that the optimized LNEs were stable for 2 months at both room (25°C) and refrigerated temperature (4°C). The optimized LNE showed 4.32-fold improvement in the oral bioavailability in comparison to a marketed tablet suspension. In vivo anti ulcer activity of rebamipide LNE was studied by testing the prophylactic effect in preventing the mucosal damage in stomach region. The mucosa of stomach in animals was damaged by per oral administration of 80% alcohol. Maximum prophylactic antiulcer activity was observed by per oral delivery of rebamipide as LNE. Our results indicated that LNEs were a promising approach for the oral delivery of rebamipide for systemic effects along with local effects in protecting gastric region, which gets damaged during peptic ulcers.
Assuntos
Alanina/análogos & derivados , Antiulcerosos/farmacocinética , Emulsificantes/farmacocinética , Nanopartículas/metabolismo , Quinolonas/farmacocinética , Administração Oral , Alanina/síntese química , Alanina/farmacocinética , Animais , Antiulcerosos/síntese química , Avaliação Pré-Clínica de Medicamentos/métodos , Emulsificantes/síntese química , Mucosa Gástrica/efeitos dos fármacos , Mucosa Gástrica/metabolismo , Lipídeos , Masculino , Nanopartículas/química , Tamanho da Partícula , Quinolonas/síntese química , Ratos , Ratos WistarRESUMO
Akebia saponin D (ASD) exhibits a variety of pharmacological activities, such as anti-osteoporosis, neuroprotection, hepatoprotection, but has poor oral bioavailability. A self-nanoemulsifying drug delivery system loaded with akebia saponin D - phospholipid complex (APC-SNEDDS) (composition: Peceol: Cremophor® EL: Transcutol HP: ASD: phospholipid; ratio: 10:45:45:51:12.3, w:w:w:w:w) was first developed to improve the oral absorption of saponins and it was found to significantly enhance ASD's oral bioavailability by 4.3 - fold (p < .01). This study was conducted to elucidate the mechanism of enhanced oral absorption of ASD by the drug delivery system of APC-SNEDDS. The aggregation morphology and particle size of ASD and APC-SNEDDS prepared in aqueous solutions were determined by transmission electron microscope and particle size analyzer, respectively. Stability of ASD and APC-SNEDDS in gastrointestinal luminal contents and mucosa homogenates were also explored. The differences of in situ intestinal permeability of ASD and APC-SNEDDS were compared. APC-SNEDDS reduced the aggregation size from 389 ± 7 nm (ASD) to 148 ± 3 nm (APC-SNEDDS). APC-SNEDDS increased the remaining drug in large intestine luminal contents from 47 ± 1% (ASD) to 83 ± 1% (APC-SNEDDS) during 4 h incubation. APC-SNEDDS provided an 11-fold increase in Ka value and an 11-fold increase in Peff value compared to ASD. In summary, APC-SNEDDS improved ASD's oral bioavailability mainly by increasing membrane permeability, destroying self-micelles and inhibiting the intestinal metabolism.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Emulsificantes/metabolismo , Absorção Gastrointestinal/fisiologia , Nanopartículas/metabolismo , Fosfolipídeos/metabolismo , Saponinas/metabolismo , Administração Oral , Animais , Emulsificantes/administração & dosagem , Emulsificantes/síntese química , Absorção Gastrointestinal/efeitos dos fármacos , Masculino , Nanopartículas/administração & dosagem , Nanopartículas/química , Fosfolipídeos/administração & dosagem , Fosfolipídeos/síntese química , Ratos , Ratos Sprague-Dawley , Saponinas/administração & dosagem , Saponinas/síntese químicaRESUMO
Lactose fatty acid esters are high-value-added derivatives of lactose and represent a class of biodegradable, non-ionic, low-molecular-weight surfactants (emulsifiers) that have considerable potential in the food, cosmetic, and pharmaceutical industries. Certain lactose esters have also garnered attention for their biological activities. In this work, we detail syntheses of a homologous series of 6'- O-acyllactose esters of varying alkyl chain length (from 6 to 18 carbons) and report on their activities as surfactants as well as their antimicrobial and cytotoxic properties. The structure-property profiles established in this work revealed that while the medium-chain esters displayed excellent emulsifying properties and moderate antimicrobial activities, their longer chain congeners exhibited the highest cytotoxicities. As such, we have established that certain 6'- O-acyllactose esters are superior to their sucrose-derived and commercially exploited counterparts. These results will serve as a useful guide for the development of lactose esters as, inter alia, emulsifiers in the food industry.
Assuntos
Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Emulsificantes/química , Emulsificantes/farmacologia , Ésteres/química , Ácidos Graxos/química , Lactose/química , Anti-Infecciosos/síntese química , Bactérias/efeitos dos fármacos , Emulsificantes/síntese química , Temperatura Alta , Estrutura MolecularRESUMO
Eight molecules, four peptides (SPs) and four lipopeptides (LPs) derived by rational design from surfactin, a well-known secreted biosurfactant from Bacillus subtilis, were produced employing Fmoc-based solid-phase synthesis. These new peptides were tested to evaluate their potential biosurfactant and biological activities, aiming at possible applications in industrial, biological, pharmaceutical, and medical use. Five molecules (SP1, SP2, SP4, LP5, and LP8) presented potential for medical uses, mainly due to their drug delivery properties as suggested by their synergistic activity with the antibiotic vancomycin against Staphylococcus aureus. All synthetic peptides showed low toxicity against Vero cell cultures, in assays of hemolysis, and in different cytotoxicity assays. In addition, we found that three peptides (SP1, LP6, and LP7) had potential technological and industrial use because of their emulsifying capacity, low toxicity, and ability to physically stabilize solutions. These novel molecules retained some properties of the parental molecule (surfactin, which was originally obtained through nonribosomal synthesis in Bacillus subtilis) but have the advantage of being linear peptides, which can be produced at large scales through the use of conventional heterologous protein expression protocols.
Assuntos
Bacillus subtilis/metabolismo , Lipopeptídeos/síntese química , Peptídeos Cíclicos/química , Peptídeos/síntese química , Técnicas de Síntese em Fase Sólida/métodos , Animais , Bacillus subtilis/química , Proteínas de Bactérias/química , Chlorocebus aethiops , Portadores de Fármacos/síntese química , Portadores de Fármacos/química , Portadores de Fármacos/farmacologia , Sinergismo Farmacológico , Emulsificantes/síntese química , Emulsificantes/química , Emulsificantes/farmacologia , Humanos , Lipopeptídeos/química , Lipopeptídeos/farmacologia , Peptídeos/química , Peptídeos/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Vancomicina/farmacologia , Células VeroRESUMO
Medicated chewing gums (MCGs) represent a unique platform for drug delivery. They have been defined as solid single-dose preparations, which may contain more than one active pharmaceutical ingredient (API) with base consisting primarily of gum that has to be chewed for a certain period of time. They mainly contain a tasteless masticatory gum base as the core with other minor nonmasticatory ingredients, such as flavors and sweeteners. Despite their advantages in drug delivery, MCGs remain a niche product due to the complexity of their formulation, lack of acceptable testing methods, and intricacy of their manufacturing. Few studies have been reported on their use, and most of the information on their composition and production could be found in patent search. The aim of this review is to provide an overview of gum composition, manufacturing process, and characterization. Due to the scarcity of studies concerning the evaluation of the mechanical properties of MCGs, greater emphasis was placed on the available performance tests and procedures for the estimation of their mechanical and textural properties. While very few tests have been recommended by the official pharmacopeias, several tests have been suggested for assessing the mechanical properties of MCGs in vitro. Properties, such as chewiness, elasticity, and firmness, of chewing gums during mastication are imperative quality attributes that have been found to strongly correlate with gum composition and mouth feel.