Australia II: A Case Study in Engineering Ethics.

Australia II became the first foreign yacht to win the America's Cup in 1983. The boat had a revolutionary wing keel and a better underwater hull form. In official documents, Ben Lexcen is credited with the design. He is also listed as the sole inventor of the wing keel in a patent application submitted on February 5, 1982. However, as reported in New York Times, Sydney Morning Herald, and Professional Boatbuilder, the wing keel was in fact designed by engineer Peter van Oossanen at the Netherlands Ship Model Basin in Wageningen, assisted by Dr. Joop Slooff at the National Aerospace Laboratory in Amsterdam. Based on telexes, letters, drawings, and other documents preserved in his personal archive, this paper presents van Oossanen's account of how the revolutionary wing keel was designed. This is followed by an ethical analysis by Martin Peterson, in which he applies the American NSPE and Dutch KIVI codes of ethics to the information provided by van Oossanen. The NSPE and KIVI codes give conflicting advice about the case, and it is not obvious which document is most relevant. This impasse is resolved by applying a method of applied ethics in which similarity-based reasoning is extended to cases that are not fully similar. The key idea, presented in Peterson's book The Ethics of Technology (Peterson, The ethics of technology: A geometric analysis of five moral principles, Oxford University Press, 2017), is to use moral paradigm cases as reference points for constructing a "moral map".

Engineers' Moral Responsibility: A Confucian Perspective.

Moral responsibility is one of the core concepts in engineering ethics and consequently in most engineering ethics education. Yet, despite a growing awareness that engineers should be trained to become more sensitive to cultural differences, most engineering ethics education is still based on Western approaches. In this article, we discuss the notion of responsibility in Confucianism and explore what a Confucian perspective could add to the existing engineering ethics literature. To do so, we analyse the Citicorp case, a widely discussed case in the existing engineering ethics literature, from a Confucian perspective. Our comparison suggests the following. When compared to virtue ethics based on Aristotle, Confucianism focuses primarily on ethical virtues; there is no explicit reference to intellectual virtues. An important difference between Confucianism and most western approaches is that Confucianism does not define clear boundaries of where a person's responsibility end. It also suggests that the gap between Western and at least one Eastern approach, namely Confucianism, can be bridged. Although there are differences, the Confucian view and a virtue-based Western view on moral responsibility have much in common, which allows for a promising base for culturally inclusive ethics education for engineers.

Pragmatism and Care in Engineering Ethics.

Engineering is a practice that must function in an environment of incomplete and uncertain knowledge. This environment has become even more difficult in an increasingly complex world. Engineering ethics has to be framed and taught in a way that addresses these realities. This paper proposes a combination of the philosophy of pragmatism and the ethic of care as a possible framework for the practice of engineering ethics that can provide flexibility and openness to address engineering ethics problems more realistically within the ethos and culture of engineering. Embedding values into practice, pragmatism and care provide a broad, reflective, and corrective framework for engineering ethics that can accommodate the realities in which engineering operates. It is shown that these two approaches are more consonant with design methodologies and have a natural fit with design thinking, so they mesh well with what engineers do and with the complexities of their work today. As humans more and more try to alter the socio-techno-natural world, e.g., the earth's climate, the combination of pragmatism and care will allow enhanced ethical behavior. Alterations to complex adaptive systems will produce highly uncertain results that require engineers to have a mindset that allows them to act with humility in the face of significant uncertainty and potential catastrophic failures.

Practicing Engineering Ethics in Global Context: A Comparative Study of Expert and Novice Approaches to Cross-Cultural Ethical Situations.

Engineers and other technical professionals are increasingly challenged by the impacts of globalization. Further, engineering educators, technical managers, and human resources staff have demonstrated great interest in selecting and training engineers who are capable of working competently, professionally, and ethically in global context. However, working across countries and cultures brings considerable challenges to global engineers, including as related to understanding and navigating local and regional differences in what counts as professional ethics and integrity. In this study, we focus on written responses to 27 assessment scenarios that involve micro- and/or macro-ethical considerations in six national/cultural contexts (China, France, Germany, India, Japan, and Mexico). More specifically, we analyze responses to open-ended versions of the scenarios. Our participants consisted of both experts (e.g., experienced engineers) and novices (e.g., undergraduate students and early career professionals). Comparing and contrasting how experts and novices responded to these ethical problems sheds light on differences in their ethical strategies and approaches. This analysis also allows us to discern what specific cultural knowledge and sensitivity were employed by experts in solving cross-cultural ethical problems, but were largely lacking among novices. Finally, we analyze and discuss challenges faced by experts and novices in responding to cross-cultural ethical situations.

Values in University-Industry Collaborations: The Case of Academics Working at Universities of Technology.

In the applied sciences and in engineering there is often a significant overlap between work at universities and in industry. For the individual scholar, this may lead to serious conflicts when working on joint university-industry projects. Differences in goals, such as the university's aim to disseminate knowledge while industry aims to appropriate knowledge, might lead to complicated situations and conflicts of interest. The detailed cases of two electrical engineers and two architects working at two different universities of technology illustrate the kinds of problems individual scholars face in university-business collaborations. These cases are based on qualitative interviews and additional data and demonstrate that, while value conflicts emerge on the organizational level, it is primarily the individual researcher who must deal with such conflicts. This analysis adds to existing studies in two ways: first, it explicitly addresses normative issues framed in terms of ethical and social values, thereby going beyond the common social-science perspective of university-business collaboration. Secondly, it provides qualitative insights, thereby identifying details and issues not apparent in quantitative studies. In particular, it is evident that university-industry collaborations are prone to value conflicts not only in research but also in education and job training.

Temporal Limits on What Engineers Can Plan.

My question is: How far into the future is it possible for engineers as such to plan? For example, the Yucca Mountain Nuclear Waste Repository was to have been designed to store nuclear waste safely for between ten thousand and one million years. Is that the sort of planning engineers as such can do? The planning engineers do would not be philosophically interesting were it not in general so often successful, much more successful than the gambles of ordinary life. So, how is such planning possible-and what are its limits. Is one million years beyond the limits of what engineers, as such, can plan? Is a thousand years? Is a hundred years? Is there an nth generation for what engineers can plan? The answer I consider here is that engineers can plan only as far into the future as they can reasonably expect engineers to be present. That is only a few generations at most.

Engineering ethics within accident analysis models.

The purpose of this paper is to further investigate engineering ethics and its gap within accident analysis models. In this paper, at first, the role of human factors in the occurrence of accidents is presented. Then engineering ethics as an element of human factors is proposed. It is suggested that engineering ethics can provide engineers with the necessary guidelines to avoid possible accidents arising from their decisions and actions. In addition, the Challenger and Columbia space shuttle case studies that demonstrate the role of engineering ethics in the prevention and occurrence of accidents are discussed. Then sequential, epidemiological, and systemic accident analysis models are briefly investigated and negligence of engineering ethics as a gap in the accident analysis models is described. At the end, we suggest that by implementing engineering ethics as a controller within the system boundary in systemic accident models we may be able to identify and prevent the ethical causes of accidents.

Scientific Integrity Principles and Best Practices: Recommendations from a Scientific Integrity Consortium.

A Scientific Integrity Consortium developed a set of recommended principles and best practices that can be used broadly across scientific disciplines as a mechanism for consensus on scientific integrity standards and to better equip scientists to operate in a rapidly changing research environment. The two principles that represent the umbrella under which scientific processes should operate are as follows: (1) Foster a culture of integrity in the scientific process. (2) Evidence-based policy interests may have legitimate roles to play in influencing aspects of the research process, but those roles should not interfere with scientific integrity. The nine best practices for instilling scientific integrity in the implementation of these two overarching principles are (1) Require universal training in robust scientific methods, in the use of appropriate experimental design and statistics, and in responsible research practices for scientists at all levels, with the training content regularly updated and presented by qualified scientists. (2) Strengthen scientific integrity oversight and processes throughout the research continuum with a focus on training in ethics and conduct. (3) Encourage reproducibility of research through transparency. (4) Strive to establish open science as the standard operating procedure throughout the scientific enterprise. (5) Develop and implement educational tools to teach communication skills that uphold scientific integrity. (6) Strive to identify ways to further strengthen the peer review process. (7) Encourage scientific journals to publish unanticipated findings that meet standards of quality and scientific integrity. (8) Seek harmonization and implementation among journals of rapid, consistent, and transparent processes for correction and/or retraction of published papers. (9) Design rigorous and comprehensive evaluation criteria that recognize and reward the highest standards of integrity in scientific research.

Evolution of Students' Varied Conceptualizations About Socially Responsible Engineering: A Four Year Longitudinal Study.

Engineers should learn how to act on their responsibility to society during their education. At present, however, it is unknown what students think about the meaning of socially responsible engineering. This paper synthesizes 4 years of longitudinal interviews with engineering students as they progressed through college. The interviews revolved broadly around how students saw the connections between engineering and social responsibility, and what influenced these ideas. Using the Weidman Input-Environment-Output model as a framework, this research found that influences included required classes such as engineering ethics, capstone design, and some technical courses, pre-college volunteering and familial values, co-curricular groups such as Engineers Without Borders and the Society of Women Engineers, as well as professional experiences through internships. Further, some experiences such as technical courses and engineering internships contributed to confine students' understanding of an engineer's social responsibility. Overall, students who stayed in engineering tended to converge on basic responsibilities such as safety and bettering society as a whole, but tended to become less concerned with improving the lives of the marginalized and disadvantaged. Company loyalty also became important for some students. These results have valuable, transferable contributions, providing guidance to foster students' ideas on socially responsible engineering.

Engineering Ethics Education: A Comparative Study of Japan and Malaysia.

This paper reports the findings of a comparative study in which students' perceived attainment of the objectives of an engineering ethics education and their attitude towards engineering ethics were investigated and compared. The investigation was carried out in Japan and Malaysia, involving 163 and 108 engineering undergraduates respectively. The research method used was based on a survey in which respondents were sent a questionnaire to elicit relevant data. Both descriptive and inferential statistical analyses were performed on the data. The results of the analyses showed that the attainment of the objectives of engineering ethics education and students' attitude towards socio-ethical issues in engineering were significantly higher and positive among Japanese engineering students compared to Malaysian engineering students. Such findings suggest that a well-structured, integrated, and innovative pedagogy for teaching ethics will have an impact on the students' attainment of ethics education objectives and their attitude towards engineering ethics. As such, the research findings serve as a cornerstone to which the current practice of teaching and learning of engineering ethics education can be examined more critically, such that further improvements can be made to the existing curriculum that can help produce engineers that have strong moral and ethical characters.

Empowering Engineering Students in Ethical Risk Management: An Experimental Study.

The complexity of industrial reality, the plurality of legitimate perspectives on risks and the role of emotions in decision-making raise important ethical issues in risk management that are usually overlooked in engineering. Using a questionnaire answered by 200 engineering students from a major engineering school in Canada, the purpose of this study was to assess how their training has influenced their perceptions toward these issues. While our results challenge the stereotypical portrait of the engineer, they also suggest that the current engineering education might fail to empower engineers to engage in ethical risk management. We therefore propose an active-learning method to help in this matter. Carried out through workshops with 34 students in chemical engineering, the effectiveness of this method has been evaluated using group interviews and questionnaires. Our results suggest that such an approach is effective, at least in the short run, to motivate students to engage in ethical risk management and to trigger reflectivity on what it means to be an engineer today.

Does Studying 'Ethics' Improve Engineering Students' Meta-Moral Cognitive Skills?

This study examines the assumption that training in professional ethics is a predictor of the meta-moral cognitive ability of engineering students. The main purpose of the study was to check the difference in the meta-moral cognitive abilities between those students who studied a course on professional ethics, as part of the engineering curriculum, and those who did not undertake such a course. Using the survey method, the author conducted a pilot study amongst 243 engineering undergraduates. The meta-moral cognitive awareness inventory developed on the basis of the meta-cognitive awareness inventory prepared by Schraw Gregory and Dennison Rayne Sperling was used to measure the meta-moral cognitive level of the respondents. The results show that there was a substantial difference in the meta-moral cognitive abilities between those students who studied professional ethics, and those who did not. The univariate analysis of variance of the collected data reveals a significant variance (p = .017).

Technology Development as a Normative Practice: A Meaning-Based Approach to Learning About Values in Engineering-Damming as a Case Study.

Engineering, as a complex and multidimensional practice of technology development, has long been a source of ethical concerns. These concerns have been approached from various perspectives. There are ongoing debates in the literature of the philosophy of engineering/technology about how to organize an optimized view of the values entailed in technology development processes. However, these debates deliver little in the way of a concrete rationale or framework that could comprehensively describe different types of engineering values and their multi-aspect interrelations in real engineering practices. Approaching engineering values from a meaning-based perspective, as in this paper, can be a reliable method of tackling such a controversial problem. This paper therefore proposes that technology development be considered a systemic normative practice and attempts to provide a comprehensive view of various built-in values, their different origins and features, and a way of prioritizing them in real engineering processes. Studying two cases of the Zayandeh Rood Dam and the Abbasi Dam will lead to practical insights into how to understand norms in technology development and incorporate them into engineering practice.

Self-Driving Cars and Engineering Ethics: The Need for a System Level Analysis.

The literature on self-driving cars and ethics continues to grow. Yet much of it focuses on ethical complexities emerging from an individual vehicle. That is an important but insufficient step towards determining how the technology will impact human lives and society more generally. What must complement ongoing discussions is a broader, system level of analysis that engages with the interactions and effects that these cars will have on one another and on the socio-technical systems in which they are embedded. To bring the conversation of self-driving cars to the system level, we make use of two traffic scenarios which highlight some of the complexities that designers, policymakers, and others should consider related to the technology. We then describe three approaches that could be used to address such complexities and their associated shortcomings. We conclude by bringing attention to the "Moral Responsibility for Computing Artifacts: The Rules", a framework that can provide insight into how to approach ethical issues related to self-driving cars.

Teaching Responsible Research and Innovation: A Phronetic Perspective.

Across the European research area and beyond, efforts are being mobilized to align research and innovation processes and products with societal values and needs, and to create mechanisms for inclusive priority setting and knowledge production. A central concern is how to foster a culture of "Responsible Research and Innovation" (RRI) among scientists and engineers. This paper focuses on RRI teaching at higher education institutions. On the basis of interviews and reviews of academic and policy documents, it highlights the generic aspects of teaching aimed at invoking a sense of care and societal obligation, and provides a set of exemplary cases of RRI-related teaching. It argues that the Aristotelian concept of phronesis can capture core properties of the objectives of RRI-related teaching activities. Teaching should nurture the students' capacity in terms of practical wisdom, practical ethics, or administrative ability in order to enable them to act virtuously and responsibly in contexts which are often characterized by uncertainty, contention, and controversy.

Morality and soap in engineers and social scientists: the Macbeth effect interacts with professions.

Several studies demonstrate that physical cleansing is actually efficacious to cope with threatened morality, thus demonstrating that physical and moral purity are psychologically interwoven. This so-called Macbeth effect has been explained, for example, by the conceptual metaphor theory that suggests an embodiment of the moral purity metaphor. Recent research draws attention to individual differences when using conceptual metaphors. The present study shows that the moral purity link interacts with different professions. Engineering and social science students were asked to hand copy a text in which the protagonist behaved in an immoral way (or in a moral way, control condition). Subsequently, they had to rate cleansing and other products. Both groups of participants showed higher ratings for cleansing products when hand copying the unethical story, but this Macbeth effect was significantly stronger for the group of engineering students. The results demonstrate that the Macbeth effect interacts with individual differences of the chosen profession. The outcome is discussed in terms of recent theories on individual differences in disgust sensitivity.

Ethics Across the Curriculum: Prospects for Broader (and Deeper) Teaching and Learning in Research and Engineering Ethics.

The movements to teach the responsible conduct of research (RCR) and engineering ethics at technological universities are often unacknowledged aspects of the ethics across the curriculum (EAC) movement and could benefit from explicit alliances with it. Remarkably, however, not nearly as much scholarly attention has been devoted to EAC as to RCR or to engineering ethics, and RCR and engineering ethics educational efforts are not always presented as facets of EAC. The emergence of EAC efforts at two different institutions-the Illinois Institute of Technology and Utah Valley University (UVU)-provide counter examples. The remarkably successful UVU initiative gave birth to EAC as a scholarly movement and to the associated Society for Ethics Across the Curriculum. EAC initiatives at the Colorado School of Mines, however, point up continuing institutional resistances to EAC. Finally, comparative reflection on successes and failures can draw some lessons for the future. One suggestion is that increasing demands for accountability and pedagogical research into what works in teaching and learning offers special opportunities.

Using Student Engagement to Relocate Ethics to the Core of the Engineering Curriculum.

One of the core problems with engineering ethics education is perceptual. Although ethics is meant to be a central component of today's engineering curriculum, it is often perceived as a marginal requirement that must be fulfilled. In addition, there is a mismatch between faculty and student perceptions of ethics. While faculty aim to communicate the nuances and complexity of engineering ethics, students perceive ethics as laws, rules, and codes that must be memorized. This paper provides some historical context to better understand these perceptual differences, and suggests that curriculum constraints are important contributing factors. Drawing on the growing scholarship of student engagement approaches to pedagogy, the paper explores how students can be empowered to effect change in the broader engineering curriculum through engineering ethics. The paper describes a student engagement approach to pedagogy that includes students as active participants in curriculum design-a role that enables them to critically reflect about why ethics is a requirement. Including students in the process of curriculum design leads students to reframe ethics as an integrative tool with the capacity to bring together different engineering departments and build bridges to non-engineering fields. This paper argues that students can and should play an active and important role in relocating ethics from the periphery to the core of the engineering curriculum.

The Ethics of Technology: Response to Critics.

The Ethics of Technology: A Geometric Analysis of Five Moral Principles proposes five moral principles for analyzing ethical issues related to engineering and technology. The objections raised by several authors to the multidimensional scaling technique used in the book reveal a lack of familiarity with this widely used technique.