Evaluation of a method to quantify posture and scapula position using biplanar radiography.

BACKGROUND: Recent studies have stated the relevance of having new parameters to quantify the position and orientation of the scapula with patients standing upright. Although biplanar radiography can provide 3D reconstructions of the scapula and the spine, it is not yet possible to acquire these images with patients in the same position. METHODS: Two pairs of images were acquired, one for the 3D reconstruction of the spine and ribcage and one for the 3D reconstruction of the scapula. Following 3D reconstructions, scapular alignment was performed in two stages, a coarse alignment based on manual annotations of landmarks on the clavicle and pelvis, and an adjusted alignment. Clinical parameters were computed: protraction, internal rotation, tilt and upward rotation. Reproducibility was assessed on an in vivo dataset of upright biplanar radiographs. Accuracy was assessed using supine cadaveric CT-scans and digitally reconstructed radiographs. FINDINGS: The mean error was less than 2° for all clinical parameters, and the 95 % confidence interval for reproducibility ranged from 2.5° to 5.3°. INTERPRETATION: The confidence intervals were lower than the variability measured between participants for the clinical parameters assessed, which indicates that this method has the potential to detect different patterns in pathological populations.

Lateralising reverse shoulder arthroplasty using bony increased offset (BIO-RSA) or increasing glenoid component diameter: comparison of clinical, radiographic and patient reported outcomes in a matched cohort.

BACKGROUND: This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups. MATERIALS AND METHODS: All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere. Matched patients were invited for a follow-up visit. ROM was assessed as well as radiographic outcomes (lateralisation, distalisation, inferior overhang, scapular notching, heterotopic bone formation, radiolucency, stress shielding, bone graft healing and viability and complications) and patient-reported outcomes (subjective shoulder value, Constant score, American Shoulder and Elbow Surgeons, activities of daily living which require internal rotation, activities of daily living which require external rotation and a visual analogue scale for pain). Outcomes were compared between the two groups. RESULTS: In total, 38 BIO-RSAs with a size 38 glenosphere were matched to 38 regular RSAs with a size 42 glenosphere. Of the 76 matched patients, 74 could be contacted and 70 (95%) were included. At the final follow-up, there were no differences between the two groups in ROM, patient-reported outcomes or radiographic outcomes (p > 0.485). CONCLUSIONS: Using a larger glenosphere is a feasible alternative to BIO-RSA for lateralising RSA, providing comparable ROM, patient-reported and radiographic results, while potentially decreasing costs, operative time and complication rates.

Superior scapular location: An overlooked albeit frequent finding in elastofibroma dorsi.

PURPOSE: To explore the frequency of superior scapular elastofibroma dorsi in a large patient series with elastofibroma dorsi. METHODS: 136 chest CTs from January 2016 to July 2022 reporting elastofibroma dorsi were retrospectively analyzed. Three radiologists assessed the number, size, and location of elastofibroma dorsi. Continuous variables underwent two-tailed t-tests with p < 0.05. Inter-observer agreement was assessed by using Cohen's Kappa values. RESULTS: In 136 patients (mean age, 75.9 +/- 9.8 years; 117 female), 330 elastofibroma dorsi were found. Six (4.4 %) patients had single, 87 (64 %) double, 22 (16.2 %) triple and 21 (15.4 %) quadruple lesions. All single and double lesions were in the inferior scapular regions. 43 (31.6 %) patients had superior scapular lesions in addition to inferior scapular elastofibroma dorsi. Inferior scapular elastofibroma dorsi was significantly larger than superior scapular elastofibroma dorsi. The probability of a right superior lesion was significantly higher in patients with a larger right inferior lesion. Inter-observer agreement was very good for experienced radiologist (κ = 94.1) and good for other radiologists (κ = 79.4 and κ = 78). CONCLUSION: In contrast to current belief, superior scapular elastofibroma dorsi accompanying the typical inferior scapular lesions is not uncommon and can even manifest bilaterally. To the best of our knowledge, this is the first case series reporting prevalence of quadruple elastofibroma dorsi.

Scapula fractures: functional anatomy, clinical assessment and management.

Fractures of the scapula are rare injuries, accounting for 3-5% of all shoulder girdle fractures. They are frequently the result of high energy trauma and often present with concurrent and life-threatening injuries to adjacent structures, leading to significant morbidity and mortality. Patients presenting with scapula fractures must receive a thorough and systematic clinical assessment as directed by national trauma guidelines. Appropriate imaging is essential in delineating fracture morphology and should at the very least include anteroposterior, anteroposterior oblique (Grashey) and axillary or scapula 'Y' view of the shoulder. Computed tomography imaging with three-dimensional reconstruction allows better delineation of the fracture morphology and helps with surgical planning. A lack of randomised controlled trials comparing the efficacy of conservative and operative management of scapula fractures has resulted in limited consensus for surgical indications. Nevertheless, most extra-articular fractures can be managed conservatively while intra-articular fractures of the glenoid frequently require surgical fixation.

Neglected Sprengel's deformity in an 80-year-old female cadaver: a case report.

BACKGROUND: Sprengel's deformity is a congenital abnormality of the shoulder girdle. Because scapular retraction, such as the Green procedure, is usually performed during childhood to improve esthetics and shoulder function, Sprengel's deformity is rarely found in older patients. CASE PRESENTATION: We presented a unique case of a Japanese female cadaver with Sprengel's deformity at the age of 80 years. Anatomical dissection and radiological imaging revealed musculoskeletal anomalies associated with Sprengel's deformity, including Klippel-Feil syndrome, presence of an omovertebral bone, and absence of the trapezius muscle. In addition, bilateral cervical ribs were in contact with the brachial plexus. These anomalies may lead to numbness, pain, and limited range of motion of the neck and upper girdle with aging. CONCLUSIONS: Because most adult patients with Sprengel's deformity experience neck pain and limited movement of the shoulder, the presented case is a rare case of neglected Sprengel's deformity in an 80-year-old cadaver.

Age Estimation Based on Computed Tomography Analysis of the Scapula.

Background and Objectives: Age estimation from skeletal remains and in living individuals is an important issue for human identification, and also plays a critical role in judicial proceedings for migrants. Forensic analysis of ossification centers is the main evaluation method for age estimation, and ossification degree can be determined using computed tomography analysis. The purpose of this study is to investigate the applicability of CT (computed tomography) in the analysis of left scapula ossification centers, for forensic age estimation in Turkish society. Materials and Methods: We analyzed six ossification centers of the left scapula and these ossification centers are the coracoid, subcoracoid, coracoid apex, acromial, glenoid, and inferior angle ossification centers. A pediatric radiologist analyzed these six ossification centers of the scapula by using a staging method defined by Schmeling et al. in 2004. Two months after the first assessment, 20 randomly selected cases was reanalyzed by the first observer and by another pediatric radiologist. Correlation between the age and ossification stage was assessed using Spearman's nonparametric correlation test. Linear regression analysis was performed using a backwards model. Cohen's kappa coefficient was used for evaluating interobserver and intraobserver variability. Results: In this retrospective study, 397 (248 male and 149 female) cases were evaluated. Ages ranged between 7.1 and 30.9. The mean age was 19.83 ± 6.49. We determined a positive significant correlation between the age and the ossification stages of ossification centers analyzed in both sexes. In each ossification center, except inferior angle, all of the stage 1 and 2 cases in both sexes were under 18 years old. Intraobserver and interobserver evaluations showed that reproducibility and consistency of the method was relatively good. Conclusions: The present study indicated that CT analysis of scapula ossification centers might be helpful in forensic age assessment of living individuals and dry bones.

Posterior deltoid-sparing approach for displaced inferior or posterior glenoid fossa fractures: technical note and case series.

Scapular surgery has usually been performed through the posterior Judet approach. This approach allows access to the entire posterior scapular body, but causes significant soft tissue damage and detaches the deltoid muscle. To date, there has been no clinical study of a deltoid-preserving approach to access the joint for displaced postero-inferior glenoid fractures (Ideberg type II or Ib). We describe an easy and less invasive approach to the postero-inferior glenoid fossa.

Differences in Osseous Shoulder Morphology, Scapulothoracic Orientation, and Muscle Volume in Patients With Constitutional Static Posterior Shoulder Instability (Type C1) Compared With Healthy Controls.

BACKGROUND: Constitutional static posterior humeral decentering (type C1 according to ABC Classification) has been recognized as a pre-osteoarthritic deformity that may lead to early-onset posterior decentering osteoarthritis at a young age. Therefore, it is important to identify possible associations of this pathologic shoulder condition to find more effective treatment options. PURPOSE: To perform a comprehensive analysis of all parameters reported to be associated with a C1 shoulder-including the osseous shoulder morphology, scapulothoracic orientation, and the muscle volume of the shoulder girdle in a single patient cohort. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: A retrospective, comparative study was conducted analyzing 17 C1 shoulders in 10 patients who underwent magnetic resonance imaging (MRI) with the complete depiction of the trunk from the base of the skull to the iliac crest, including both humeri. The mean age of the patients was 33.5 years, and all patients were men. To measure and compare the osseous shoulder morphology (glenoid version, glenoid offset, humeral torsion, anterior acromial coverage, posterior acromial coverage, posterior acromial height, and posterior acromial tilt) and scapulothoracic orientation (scapular protraction, scapular internal rotation, scapular upward rotation, scapular translation, scapular tilt, and thoracic kyphosis), these patients were matched 1 to 4 according their age, sex, and affected side with shoulder-healthy patients who had received positron emission tomography (PET)-computed tomography. To measure and compare the muscle volume of the shoulder girdle (subscapularis, infraspinatus/teres minor, supraspinatus, trapezius, deltoid, latissimus dorsi/teres major, pectoralis major, and pectoralis minor), patients were matched 1 to 2 with patients who had received PET-MRI. Patients with visible pathologies of the upper extremities were excluded. RESULTS: The C1 group had a significantly higher glenoid retroversion, increased anterior glenoid offset, reduced humeral retrotorsion, increased anterior acromial coverage, reduced posterior acromial coverage, increased posterior acromial height, and increased posterior acromial tilt compared with controls (P < .05). Decreased humeral retrotorsion showed significant correlation with higher glenoid retroversion (r = -0.742; P < .001) and higher anterior glenoid offset (r = -0.757; P < .001). Significant differences were found regarding less scapular upward rotation, less scapular tilt, and less thoracic kyphosis in the C1 group (P < .05). The muscle volume of the trapezius and deltoid was significantly higher in the C1 group (P < .05). CONCLUSION: Patients with C1 shoulders differ from healthy controls regarding osseous scapular and humeral morphology, scapulothoracic orientation, and shoulder girdle muscle distribution. These differences may be crucial in understanding the delicate balance of glenohumeral centering.

Treatment options and outcomes for delayed scapular anatomical neck fractures: a case report and review of the literature.

INTRODUCTION: Scapular anatomical neck fractures are among the most infrequent shoulder girdle fractures. Only seven radiologically confirmed cases of scapular anatomical neck fractures have been documented in the literature to date, of which only one case underwent delayed surgery. CASE PRESENTATION: A 34-year-old male Persian patient with morbid obesity was diagnosed with a scapula anatomical neck fracture after a motor vehicle collision. The radiographic assessment of the patient indicated an increase in the scapular glenopolar angle (73.9°). Due to concurrent chest and head injuries, surgical intervention was deferred until 6 weeks following the injury. The posterolateral limited Dupont-Evrard approach was used because of the patient's extremely high body mass index. Two plates were utilized to achieve stable fixation of the glenoid neck fracture. Following a 1 year follow-up period, complete fracture union was successfully attained, resulting in a constant score of 79. CONCLUSIONS: The most accurate radiographic indicators of these fractures are a superior fracture line located laterally to the coracoid process, a small inferior spike, and an elevated glenopolar angle. The only tendon attached to the glenoid is the long head of the triceps, making these fractures unstable; therefore, surgery is required in the majority of instances. The small size of the fractured component makes stabilization more difficult. Overall, anatomical scapular neck fractures are extremely uncommon and distinguished from other scapular fractures by their unique radiological and biomechanical characteristics. This case highlights the challenges encountered when managing scapular fractures in patients with morbid obesity. The delayed surgical intervention and the choice of surgical approach tailored to the patient's specific anatomical and physiological considerations proved to be effective in achieving a favorable outcome.

A formula for instability-related bone loss: estimating glenoid width and redefining bare spot.

PURPOSE: The aim of the study reveals a new intuitive method for preoperatively assessing defect ratio in glenoid deficiency based on the native glenoid width and the bare spot. METHODS: A linear relationship, i.e. the rh formula, between the native glenoid width (2r) and height (h) was revealed by a cadaver cohort (n = 204). To validate the reliability of the rh formula, 280 3D-CT images of intact glenoids were recruited. To evaluate the accuracy of rh formula in estimating glenoid defect, the 65 anterior-inferior defect models were artificially established based on the 3D-CT images of intact glenoids. Moreover, a clinically common anterior-posterior (AP) method was compared with the rh formula, to verify the technical superiority of rh formula. RESULTS: The regression analysis indicated a linear relationship between the width and height of intact glenoid: 2r = 0.768 × h - 1.222 mm (R2 = 0.820, p < 0.001). An excellent reliability was found between the formula prediction and model width (ICC = 0.911, p = 0.266). An excellent agreement was found between the predicted values and model parameters (glenoid width, ICCrh = 0.967, prh = 0.778; defect ratio, prh = 0.572, ICCrh = 0.997). And, it is of higher accuracy compared to the AP method (glenoid width, ICCAP = 0.933, pAP = 0.001; defect ratio, ICCAP = 0.911, pAP = 0.033). CONCLUSION: Applying the cadaver-based formula on 3D-CT scans accurately predicts native glenoid width and redefines bare spot for preoperatively determining glenoid bone loss.

Scapular Osteotomy for Lateral Access to a T1-2 Foraminal Disc Extrusion, Treated by Mini-Hemilaminectomy in a Dog.

A 4-year-old female spayed French bulldog was presented with a 2-day history of neck pain and left thoracic limb lameness with no neurological deficits. A computed tomography (CT) examination showed a left foraminal T1-2 disc extrusion. Surgical management was performed using a left lateral approach to the vertebral column with a scapular osteotomy. A T1-2 mini-hemilaminectomy was performed. The scapular osteotomy was stabilized with two 2.4-mm locking compression plates. The postoperative CT and radiographic examinations showed adequate decompression of the T1-2 foramen and good reduction in the scapular osteotomy. The dog was able to walk the following day. At the 1-month follow-up, the dog had no neck pain but persistent slight left thoracic limb lameness. Ten months postoperatively, a CT scan showed no abnormalities at the surgical site, and the dog had no neurological deficits nor lameness. The aim of this case report was to describe a new lateral approach to T1-2 intervertebral space.

3D-printed glenoid implant reconstruction, after partial scapulectomy for malignant tumors: a case series.

PURPOSE: Glenoid tumors are extremely rare, and reconstruction remains very challenging. The aim of this study is to present the clinical and functional outcomes, of a new glenoid reconstruction method using 3-dimensional-printed implant. METHODS: Four patients with primary glenoid tumors underwent reconstruction using 3-dimensional-printed glenoid implant linked with reverse shoulder arthroplasty. We retrospectively reviewed the clinical and functional outcome, using MSTS and DASH score, as well as complications' rate. RESULTS: Wide excision was achieved in all patients. No local recurrence or distant metastasis was diagnosed at the follow-up period. The mean MSTS score was 80.5%, and DASH score was 15.2%. According to Hendersons' classification, there were no postoperative complications. CONCLUSION: The use of 3-dimensional-printed implants, can be a very reliable solution with satisfying clinical and functional outcomes for reconstruction, in patients with musculoskeletal malignancies of the glenoid. Level of evidence IV Treatment Study.

[Scapular fractures]. / Scapulafrakturen.

Scapular fractures are rare injuries that require different treatment strategies. Nondisplaced fractures and the majority of scapular body fractures can be treated conservatively, while surgical treatment should be considered for displaced fractures involving the glenoid. Displaced glenoid fractures of appropriate size and intra-articular step formation should be treated surgically. Different classification systems for scapular fractures can support the treatment decision. Postoperative and posttraumatic management should include early mobilization to achieve a good functional outcome. Clear recommendations and treatment algorithms at the evidence level are not available and long-term outcomes of scapular fractures are the subject of further investigation. The results published so far show good to excellent results for surgical and conservative treatment, depending on the type of fracture. Individual patient factors should be considered when planning treatment.

Three-Dimensional Mapping of Scapular Body, Neck, and Glenoid Fractures.

OBJECTIVES: The purpose of this study was to report patterns of scapular fractures and define them with a contemporary methodology. METHODS: . DESIGN: Retrospective study, 2015-2021. SETTING: Single, academic, Level 1 trauma center. PATIENT SELECTION CRITERIA: Consecutive patients ≥18 years, presenting with unilateral scapula fracture, with thin-slice (≤0.5-mm) bilateral computed tomography (CT) scans of the entirety of both the injured and uninjured scapulae. OUTCOME MEASURES AND COMPARISONS: Thin-slice (0.5-mm) CT scans of injured and normal scapulae were obtained to create three-dimensional (3D) virtual models. 3D modeling software (Stryker Orthopedics Modeling and Analytics, Stryker Trauma GmbH, Kiel, Germany aka SOMA) was used to create a 3D map of fracture location and frequency. Fracture zones were delineated using anatomic landmarks to characterize fracture patterns. RESULTS: Eighty-seven patients were identified with 75 (86%) extra-articular and 12 (14%) intra-articular fractures. The dominant fracture pattern emanated from the superior lateral border (zone E) to an area inferior to the spinomedial angle (zone B) and was present in 80% of extra-articular fractures. A second-most common fracture line propagated from the primary (most-common) line toward the inferior medial scapular border with a frequency of 36%. Bare zones (with 1 or no fractures present) were identified in 4 unique areas. Furthermore, intra-articular fractures were found to be heterogenous. CONCLUSIONS: The 3D fracture map created in this study confirmed that extra-articular scapular fractures occur in certain patterns with a relatively high frequency. Results provide greater insight into scapular fracture locations and may help to study prognosis of injury and improve treatment strategy including operative approaches and surgical tactics.

Acromion fractures after reverse shoulder arthroplasty occur in predictable clusters.

BACKGROUND: Acromion and scapular spine fractures (ASFs) following reverse total shoulder arthroplasty (RSA) have been reported at a rate of 3.9%. The location of the fracture has been shown to be an important factor in determining the outcomes of nonoperative treatment, with medial fractures having worse outcomes than lateral fractures. As the debate between operative and nonoperative treatment continues, a more precise understanding of the location of the fracture is necessary for effective management. The purpose of this study was to use 3-dimensional computed tomography (CT) reconstruction to characterize the exact location of ASFs after RSA. METHODS: A retrospective review of 2 separate institutional shoulder and elbow repositories was performed. Patients with post-RSA ASFs documented by post-fracture CT scans were included. The query identified 48 patients who sustained postoperative ASFs after RSA between July 2008 and September 2021. CT scans of patients with ASFs were segmented using Mimics software. Eight patients were excluded because of poor image quality. Each bone model was manipulated using 3-Matic Medical software to align the individual scapula with an idealized bone model to create a view of scapular fracture locations on a normalized bone model. This model was used to classify the fractures using the modified Levy classification. RESULTS: The study cohort consisted of 40 patients with a diagnosis of postoperative ASF after RSA. The median age at the time of surgery was 76 years (interquartile range, 73-79 years). The cohort comprised 32 women (80%) and 8 men (20%), with a median body mass index of 27.8. Only 10 patients (25%) had a previous diagnosis of osteoporosis and 6 (13%) had a diagnosis of inflammatory arthritis; 53% of patients underwent RSA owing to rotator cuff tear arthropathy. The distribution of fracture locations was similar within the cohort. However, lateral fractures were slightly more prevalent. The most common fracture location was the type I zone, with 12 fracture lines (29%). There were 11 fracture lines (26%) in the type IIa zone, 10 (23%) in the type IIb zone, 0 in the type IIc zone, and 9 (21%) in the type III zone. CONCLUSION: ASFs after RSA occur in 4 predictable clusters. No fractures appeared to distinctly cluster in the type IIc zone, which may not represent a true fracture zone. Understanding the distribution of these fractures will help to enable the future design of implants and devices to stabilize the fractures that require fixation.

Both angled bony-increased offset and metal-augmented baseplates provide satisfactory bone incorporation to the glenoid in reverse total shoulder arthroplasty: a radiographic evaluation using tomosynthesis.

BACKGROUND: Angled bony-increased offset and metal-augmented baseplate have recently been used to achieve neutral to inferior inclination of the glenoid implant. Nonetheless, bone incorporation is difficult to evaluate using computed tomography or other conventional methods owing to the presence of metal artifacts; therefore, whether bone incorporation between the grafted bone and glenoid or between the graft and baseplate implant can be achieved remains unclear. Several studies have reported the effectiveness of tomosynthesis in reducing metal artifacts for the evaluation of implant loosening, bone resorption, and spot welds. We aimed to evaluate and compare the bone incorporation rates between angled bony-increased offset and metal-augmented implants using tomosynthesis with metal artifact reduction technology. We hypothesized that a high bone incorporation rate would be obtained with angled bony-increased offset and a metal-augmented baseplate. METHODS: A total of 52 patients who underwent reverse total shoulder arthroplasty (TSA) with angled bony-increased offset and 42 patients who underwent reverse total shoulder arthroplasty with metal-augmented baseplate were assessed and followed up for a minimum of 2 years. The bone incorporation and implant loosening rates were compared between the 2 groups, and the sites of spot welds and trabeculation were recorded according to zones. Bone incorporation between the bone and prosthesis was defined as a confirmation of spot welds connecting the porous area and bone in more than three zones. Bone incorporation between the native bone and grafted bone was defined as an observation of trabeculation. Glenoid loosening was defined as the presence of at least 1 mm radiolucency around the prosthesis in more than 2 zones. RESULTS: Both the angled bony-increased offset and metal-augmented baseplate groups achieved sufficient bone incorporation rates (98% [51/52 cases] vs. 100% [42/42 cases], P = 1.0) and low implant loosening rates (2% [1/52 cases] vs. 0% [0/42 cases], P = 1.0). Spot welds and trabeculation were likely to be confirmed in the lower parts of the glenoid. CONCLUSION: The two groups did not show any significant differences regarding bone incorporation rates. Considering the complexity of performing the procedure with angled bony-increased offset, the use of a metal-augmented baseplate can serve as an alternative treatment to avoid superior inclination in reverse total shoulder arthroplasty.

Routine Contrasted Chest CT Accurately Identifies Anatomic Variations of the Proximal Subscapular System.

OBJECTIVE: The vascular anatomy of the proximal subscapular artery has been previously classified into 2 major types depending on the presence of a common subscapular trunk. The purpose of this study was to determine the utility, reliability, and cost of routine chest imaging to identify these anatomical variations. METHODS: Data were collected retrospectively at a tertiary medical center for patients who were undergoing CT chest for various indications between October 2019 and October 2020. Two independent and blinded readers interpreted CT chest with contrast of 52 patients for a total 104 sides. RESULTS: The proximal branching pattern of the subscapular system was identified to have a common trunk in 99 (95%) sides. The remaining five sides (5%) demonstrated two arterial pedicles; with one patient exhibiting the variant anatomy bilaterally. CONCLUSION: Preoperative CT chest with contrast can accurately identify anatomic variation of the subscapular vascular system. For complex reconstruction requiring a single anastomosis in the vessel depleted neck, preoperative imaging can assure selection of a type I vascular anatomy of the proximal subscapular system. Preoperative imaging with contrasted CT has value in assessing this anatomy when planning for chimeric flaps involving circumflex scapular and thoracodorsal arteries. LEVEL OF EVIDENCE: 3 Laryngoscope, 134:684-687, 2024.