[Fe(NCMe)6](BF4)2 is a bifunctional catalyst for styrene aziridination by nitrene transfer and heterocycle expansion by subsequent dipolar insertion.

The solvated iron(II) salt [Fe(NCMe)6](BF4)2 (Me = methyl) is shown to be a bifunctional catalyst with respect to aziridination of styrene. The salt serves as an active catalyst for nitrene transfer from PhINTs to styrene to form 2-phenyl-N-tosylaziridine (Ph = phenyl; Ts = tosyl, -S{O}2-p-C6H4Me). The iron(II) salt also acts as a Lewis acid in non-coordinating CH2Cl2 solution, to catalyze heterolytic CN bond cleavage of the aziridine and insertion of dipolarophiles. The 1,3-zwitterionic intermediate is presumably supported by interaction of the metal dication with the anion, and by resonance stabilization of the carbocation. Nucleophilic dipolarophiles then insert to give a five-membered heterocyclic ring. The result is a two-step cycloaddition, formally [2 + 1 + 2], that is typically regiospecific, but not stereospecific. This reaction mechanism was confirmed by conducting a series of one-step, [3 + 2] additions of unsaturated molecules into pre-formed 2-phenyl-N-tosylaziridine, also catalyzed by [Fe(NCMe)6](BF4)2. Relevant substrates include styrenes, carbonyl compounds and alkynes. These yield five-membered heterocylic rings, including pyrrolidines, oxazolidines and dihydropyrroles, respectively. The reaction scope appears limited only by the barrier to formation of the dipolar intermediate, and by the nucleophilicity of the captured dipolarophile. The bifunctionality of an inexpensive, earth-abundant and non-toxic catalyst suggests a general strategy for one-pot construction of heterocyclic rings, as demonstrated specifically for pyrrolidine ring formation.

Oxido- and mixed-ligand peroxido complexes of niobium(V) as potent phosphatase inhibitors and efficient catalysts for eco-friendly styrene epoxidation.

The present study describes the facile synthesis and comprehensive characterization of new oxido and peroxidoniobium(V) complexes with biogenic ligands, maltol (malt) and deferiprone (def) in their co-ordination sphere, viz., [NbO(malt)3]2·9H2O (1), Na2[Nb(O2)3(malt)]·H2O (2) and Na2[Nb(O2)3(def)]·2H2O (3). The complexes were characterized using various analytical and spectroscopic techniques (FTIR, Raman, NMR, UV-visible, TGA, ICP-OES and elemental analysis). The charge neutral complex 1 was further characterized by single crystal XRD analysis, and the proposed structures of the peroxidoniobium (pNb) complexes 2 and 3 were validated by density functional theory (DFT) studies. A comparative investigation on the in vitro effect of the title compounds and a set of previously reported polymer-anchored peroxidoniobium complexes, [Nb(O2)3(sulfonate)2]3--PSS [PSS = poly(sodium 4-styrene sulfonate)] (5), [Nb2(O2)6(carboxylate)2]4--PA [PA = poly(sodium acrylate)] (6) and [Nb(O2)3(carboxylate)]2--PMA [PMA = poly(sodium methacrylate)] (7), on the activity of the model enzyme wheat thylakoid acid phosphatase has revealed that each of the compounds is an effective inhibitor of the enzyme (IC50 values varying within the range 1-64 µM). The results of the detailed enzyme kinetic study demonstrated that the compounds induce their inhibitory effect via distinct pathways. The oxidoniobium complex 1 as well as polymer-anchored pNb complexes acted as classical non-competitive inhibitors of ACP, whereas the monomeric pNb complexes emerged as mixed inhibitors of the enzyme (Kii > Ki). Notably, the complexes serve as excellent recyclable catalysts for selective styrene epoxidation with H2O2, affording 99% styrene conversion, ≥98% epoxide selectivity and a high turnover number of 1740 under eco-friendly solventless conditions.

Complete integration of carbene-transfer chemistry into biosynthesis.

Biosynthesis is an environmentally benign and renewable approach that can be used to produce a broad range of natural and, in some cases, new-to-nature products. However, biology lacks many of the reactions that are available to synthetic chemists, resulting in a narrower scope of accessible products when using biosynthesis rather than synthetic chemistry. A prime example of such chemistry is carbene-transfer reactions1. Although it was recently shown that carbene-transfer reactions can be performed in a cell and used for biosynthesis2,3, carbene donors and unnatural cofactors needed to be added exogenously and transported into cells to effect the desired reactions, precluding cost-effective scale-up of the biosynthesis process with these reactions. Here we report the access to a diazo ester carbene precursor by cellular metabolism and a microbial platform for introducing unnatural carbene-transfer reactions into biosynthesis. The α-diazoester azaserine was produced by expressing a biosynthetic gene cluster in Streptomyces albus. The intracellularly produced azaserine was used as a carbene donor to cyclopropanate another intracellularly produced molecule-styrene. The reaction was catalysed by engineered P450 mutants containing a native cofactor with excellent diastereoselectivity and a moderate yield. Our study establishes a scalable, microbial platform for conducting intracellular abiological carbene-transfer reactions to functionalize a range of natural and new-to-nature products and expands the scope of organic products that can be produced by cellular metabolism.

Anti-adhesive activity of some secondary metabolites against Staphylococcus aureus on 3D printing medical materials.

Recent improvements in 3D printing technology have increased the usage of 3D printed materials in several areas. An exciting and emerging area of applying these next-generation manufacturing strategies is the development of devices for biomedical applications. The main aim of this work was to investigate the effect of tannic acid, gallic acid, and epicatechin gallate on the physicochemical characteristics of acrylonitrile butadiene-styrene (ABS) and Nylon 3D printing materials using the contact angle method. The adhesion of Staphylococcus aureus on untreated and treated materials was evaluated by scanning electron microscopy (SEM) analysis and the images were treated by MATLAB software. The results of the contact angle measurements showed a significant change in the physicochemical properties of both surfaces, indicated an increase in the electron donor character of 3D printing materials following treatment. Thus, the ABS surfaces treated with tannic acid, gallic acid, and epicatechin gallate have become more electron donating. Furthermore, our results proved the ability of S. aureus to adhere on all materials with a percentage of 77.86% for ABS and 91.62% for nylon. The SEM has shown that all actives molecules were sufficient to obtain better inhibition of bacterial adhesion, which tannic acid has shown a total inhibition of S. aureus on ABS. From these results, our treatment presents a high potential for utilization as an active coating to prevent bacterial attachment and the eventual biofilm development in medical field.

Structural Insights into Polymer-Bounded Lipid Nanodiscs.

Membrane proteins are an essential part of signaling and transport processes and are targeted by multiple drugs. To isolate and investigate them in their native state, polymer-bounded nanodiscs have become valuable tools. In this study, we investigate the lipid model system dimyristoyl-phosphocholine (DMPC) with the nanodisc-forming copolymers styrene maleic acid (SMA) and diisobutylene maleic acid (DIBMA). Using small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS), we studied the influence of polymer concentration and temperature on the nanodisc structure. In Tris buffer, the size of nanodiscs formed with SMA is smaller compared to DIBMA at the same polymer ratio. In both cases, the size decreases monotonically with increasing polymer concentration, and this effect is more pronounced when using SMA. Measurements at temperatures (T) between 5 and 30 °C in phosphate buffer showed an incomplete solubilization at high T even at polymer/lipid ratios above that required for complete lipid solubilization. For DIBMA, the nanodiscs developed at lower temperatures are stable and the net repulsion increases, while for SMA, the individual nanodiscs possess smaller sizes and are less affected by T. However, using DLS, one can observe SMA agglomerates at low T. Interestingly, for both polymers, no drastic changes of the observable parameters (radius and bilayer thickness) are seen upon cooling, which would indicate a sharp (first-order) phase transition from liquid-crystalline to gel, but only gradual changes. Hence, we conclude that the transition from a gel toward a liquid-crystalline lipid phase proceeds over a broad T-range compared to a continuous lipid bilayer. These results can pave the way toward the development of better protocols for studying membrane proteins stabilized in this type of membrane mimics.

Immunochemical characterisation of styrene maleic acid lipid particles prepared from Mycobacterium tuberculosis plasma membrane.

Membrane proteins of Mycobacterium tuberculosis (Mtb) can be targeted for the development of therapeutic and prophylactic interventions against tuberculosis. We have utilized the unique membrane-solubilising properties of the styrene maleic acid copolymer (SMA) to prepare and characterise 'styrene maleic acid lipid particles' from the native membrane of Mtb (MtM-SMALPs). When resolved by SDS-PAGE and visualised with coomassie blue, the molecular weights of Mtb membrane (MtM) proteins solubilised by SMA were mostly in the range of 40-70 kDa. When visualised by transmission electron microscopy, MtM-SMALPs appeared as nanoparticles of discrete shapes and sizes. The discoid nanoparticles exhibited a range of diameters of ~10-90 nm, with largest portion (~61%) ranging from 20-40 nm. MtM proteins of a molecular weight-range overlapping with that of MtM-SMALPs were also amenable to chemical cross-linking, revealing protein complex formation. Characterisation using monoclonal antibodies against seven MtM-associated antigens confirmed the incorporation of the inner membrane protein PRA, membrane-associated proteins PstS1, LpqH and Ag85, and the lipoglycan LAM into MtM-SMALPs. Conversely, the peripheral membrane proteins Acr and PspA were nearly completely excluded. Furthermore, although MtM showed an abundance of Con A-binding glycoproteins, MtM-SMALPs appeared devoid of these species. Immune responses of healthcare workers harbouring 'latent TB infection' provided additional insights. While MtM-SMALPs and MtM induced comparable levels of the cytokine IFN-γ, only MtM-SMALPs could induce the production of TNF-α. Antibodies present in the donor sera showed significantly higher binding to MtM than to MtM-SMALPs. These results have implications for the development of MtM-based immunoprophylaxis against tuberculosis.

Metal-Free Aerobic C-N Bond Formation of Styrene and Arylamines via Photoactivated Electron Donor-Acceptor Complexation.

This study processes a facile and green approach for the Markovnikov-selective hydroamination of styrene with naphthylamine through irradiation with UV LED light (365 nm) via an electron donor-acceptor complexation between naphthylamines and oxygen in situ. This protocol showcases the synthetic potential for aerobic C-N bond formation without using a metal catalyst and photosensitizer. Three naphthylamines were examined and afforded desired C-N bond formation product in moderate yield.

Application of validated migration models for the risk assessment of styrene and acrylonitrile in ABS plastic toys.

With styrene and acrylonitrile in ABS plastic toys as examples, this paper introduces to the development of a systematic strategy for studying the chemical migration risk in toys. The approach, included the detection method, establishment of migration model, model verification, and the practical application of the model in risk assessment. First, simple and sensitive methods for detecting analyte residues and migration were developed by headspace GC-MS. Then, the migration models were established based on the migration data from 5 min to 168 h and verified using 11 ABS samples. The results showed that the predicted values of the models and the experimental values had a good fit (RMSE=0.10-8.72 %). Subsequently, the migration of analytes in 94 ABS toys was predicted with these models at specific migration times. The daily average exposure level to styrene and acrylonitrile were estimated for children (3 months to 3 years). At last, the migration models reasonably predicted that the cancer risk of styrene and acrylonitrile in ABS toys were 1.6 × 10-8-1.4 × 10-6 and 3.1 × 10-8-1.6 × 10-6, respectively. This research contributes to promote toy safety and child health by enriching migration models and risk assessments.

Rapid Oxygen-Tolerant Synthesis of Protein-Polymer Bioconjugates via Aqueous Copper-Mediated Polymerization.

The synthesis of protein-polymer conjugates usually requires extensive and costly deoxygenation procedures, thus limiting their availability and potential applications. In this work, we report the ultrafast synthesis of polymer-protein bioconjugates in the absence of any external deoxygenation via an aqueous copper-mediated methodology. Within 10 min and in the absence of any external stimulus such as light (which may limit the monomer scope and/or disrupt the secondary structure of the protein), a range of hydrophobic and hydrophilic monomers could be successfully grafted from a BSA macroinitiator, yielding well-defined polymer-protein bioconjugates at quantitative yields. Our approach is compatible with a wide range of monomer classes such as (meth) acrylates, styrene, and acrylamides as well as multiple macroinitiators including BSA, BSA nanoparticles, and beta-galactosidase from Aspergillus oryzae. Notably, the synthesis of challenging protein-polymer-polymer triblock copolymers was also demonstrated, thus significantly expanding the scope of our strategy. Importantly, both lower and higher scale polymerizations (from 0.2 to 35 mL) were possible without compromising the overall efficiency and the final yields. This simple methodology paves the way for a plethora of applications in aqueous solutions without the need of external stimuli or tedious deoxygenation.

Influence of LiTaO3 (0001) and KTaO3 (001) Perovskites Structures on the Molecular Adsorption of Styrene and Styrene oxide: A Theoretical Insight by Periodic DFT Calculations.

In this research, the adsorption of styrene and styrene oxide, both biomass derivatives, on KTaO3 (001) and LiTaO3 (0001) perovskite-like structures was studied from a theoretical point of view. The study was carried out using density functional theory (DFT) calculations. The adsorption phenomenon was deeply studied by calculating the adsorption energies (Eads ), adsorbate-surface distances (Å) and evaluating the differences of charge density and charge transfer (ΔCT). For complexes adsorbed on KTaO3 (TaO2 , KO and K(OH)2 exposed layers), the highest Eads was found for styrene oxide, attributed to the oxygen reactivity of the epoxy group describing a strong interaction with the surface. However, when evaluating a K(O)2 model, a more favorable interaction of styrene with the surface is observed, resulting in a high Eads of -9.9 eV and a ΔCT of 3.1e. For LiTaO3 , more favorable interactions are found for both adsorbates compared to KTaO3 , evidenced by the higher adsorption energies and charge density differences, particularly for the styrene complex adsorbed on TaO2 exposed layer (Eads : -10.2 eV). For the LiO termination, the surface exposed oxygens are fundamental for the adsorption of styrene and styrene oxide, leading to a considerable structural distortion. The obtained results thus provide understanding of the structural features, surface reactivity and adsorption sites of LiTaO3 and KTaO3 perovskite in the context of a heterogeneous catalytic process, such as the oxidation of styrene.

Lewis Adduct-Dissociating Hydrolysis of Boratrane for Water-Triggered Dehydration of Copolymers with a Hydrophobic Moiety.

As a new example of intrinsically water-triggered phenomena, we report underwater dehydration of the statistical copolymers synthesized from triethanolamine borate (TEAB) methacrylate and styrene (St) induced by the hydrolysis of the pendant TEAB group. TEAB possesses high polarity owing to its internal Lewis adduct structure, which is lost by hydrolysis to triethanolamine (TEA) with a lower dipole moment. Therefore, the hydration of the copolymers became unfavorable through the hydrolysis of the pendant TEAB to TEA, despite polyol formation, and through a hydrophobic interaction based on St moieties becoming alternatively dominant. The dehydration behavior of the copolymers, along with the hydrolysis of the pendant TEAB group, was systematically investigated. The water solubility of the copolymers was found to be dependent on the gradient of the hydrolysis equilibrium of TEAB on the side chains and was the lowest for the TEA state. These findings offer a novel concept toward designing water-responsive materials.

Controllable Design and Preparation of Hydroxyl-Terminated Solution-Polymerized Styrene Butadiene for Polyurethane Elastomers with High-Damping Properties.

Vibration and noise are ubiquitous in social life, which severely damage machinery and adversely affect human health. Thus, the development of materials with high-damping performance is of great importance. Rubbers are typically used as damping materials because of their unique viscoelasticity. However, they do not satisfy the requirements of different applications with various working conditions. In this study, the advantages of the high loss factor of styrene butadiene rubber (SBR) are combined with the strong designability of polyurethane. Hydroxyl-terminated solution-polymerized styrene butadiene rubbers (HTSSBRs) with different structures are prepared using anionic polymerization. HTSSBRs are then used as the soft segment during the synthesis of temperature-tunable high-damping performance polyurethanes (HTSSBR-polyurethanes (PUs)). The prepared HTSSBR-PUs with different structures exhibit excellent loss performance, a maximum loss factor (tan δmax ) of above 1.60, and an effective damping performance over a wide temperature range compared to traditional SBR and polyurethane. Therefore, this work offers an effective method for the design of damping materials with adjustable properties.

Fungal growth, patulin accumulation and volatile profile in 'Fuji Mishima' apples under controlled atmosphere and dynamic controlled atmosphere.

The objective of this study was to evaluate fungal and patulin contamination, together with its correlation with the volatile compounds (VCs), in 'Fuji Mishima' apples (up to 25% decayed) under controlled atmosphere (CA) and dynamic controlled atmosphere with respiratory quotient (DCA-RQ) of 1.3 combined with different partial pressures of carbon dioxide (0.8, 1.2, 1.6 and 2.0 pCO2). Fruits were stored under the above conditions for 8 months at 0.5 °C plus 7 days shelf life at 20 °C. Toxigenic fungi and patulin accumulation were found in apples from all treatments. Penicillium expansum was the most prevalent species. For all storage conditions, patulin concentrations were above the maximum level allowed in Brazil (50  µg  kg-1) with an exception of DCA-RQ1.3 + 0.8 kPa CO2. This condition, with lower pCO2, showed the lowest patulin accumulation, below the legal limit. The CA provided the highest patulin concentration (166 µg  kg-1). It was observed that fungal growth could also contribute to changes in the volatile composition. Styrene and 3-methyl-1-butanol are considered P. expansum markers in some apple cultivars and were detected in the samples. However, it was not possible to identify volatile organic compounds (VOCs) that are biomarkers from P. expansum, because there were other fungi species present in all samples. In this study, styrene, n-decanoic acid, toluene, phenol and alpha-farnesene were the compounds that showed the most positive correlation with patulin accumulation. On the other hand, a negative correlation of patulin with acids has been shown, indicating that in treatments with a higher patulin concentration there were less acidic compounds.

Styrene-acrylonitrile-copolymer and acrylonitrile-butadiene-styrene-copolymer: a study on extractable and migratable oligomers.

Styrene-acrylonitrile-copolymer (SAN) and acrylonitrile-butadiene-styrene-copolymer (ABS) are gaining in importance as food contact materials. Oligomers and other non-intentionally added substances can migrate into foodstuffs. Five SAN and four ABS samples from the German market and manufacturers were extracted and the extractable oligomers were characterised by high performance liquid chromatography-mass spectrometry/ultraviolet detection/chemiluminescence nitrogen detection/fluorescence detection and gas chromatography-mass spectrometry. Trimers, formed from acrylonitrile and styrene units, were determined to be the dominating group of extractable oligomers in SAN and ABS in concentrations of about 4900-15800 mg/kg material. Furthermore, styrene-acrylonitrile dimers, styrene oligomers, styrene monomer and ethylbenzene were identified in the sample extracts. Migration testing with three consecutive migrations for multiple use articles was performed for two SAN articles. Migration of trimers into water, 3% acetic acid, 10% and 20% ethanol under hot-fill conditions (70°C, 2 h) was not detectable above 9 µg/dm2, while 50% ethanol acting as a food simulant for milk (124 µg/dm2 trimers during the third migration) was shown to overestimate the actual migration into milk (< 11 µg/dm2 trimers at 70°C, 2 h). 2-Amino-3-methyl-1-naphthalenecarbonitrile (AMNC), an oligomer degradation product and a primary aromatic amine, was detected in all material sample extracts (0.3-17.1 mg/kg material) and was released into food simulants in low amounts (< 0.014 µg/dm2 during the third migration into 50% ethanol at 70°C, 2 h).

Conformational Tuning of Amylin by Charged Styrene-Maleic-Acid Copolymers.

Human amylin forms structurally heterogeneous amyloids that have been linked to type-2 diabetes. Thus, understanding the molecular interactions governing amylin aggregation can provide mechanistic insights in its pathogenic formation. Here, we demonstrate that fibril formation of amylin is altered by synthetic amphipathic copolymer derivatives of the styrene-maleic-acid (SMAQA and SMAEA). High-speed AFM is used to follow the real-time aggregation of amylin by observing the rapid formation of de novo globular oligomers and arrestment of fibrillation by the positively-charged SMAQA. We also observed an accelerated fibril formation in the presence of the negatively-charged SMAEA. These findings were further validated by fluorescence, SOFAST-HMQC, DOSY and STD NMR experiments. Conformational analysis by CD and FT-IR revealed that the SMA copolymers modulate the conformation of amylin aggregates. While the species formed with SMAQA are α-helical, the ones formed with SMAEA are rich in ß-sheet structure. The interacting interfaces between SMAEA or SMAQA and amylin are mapped by NMR and microseconds all-atom MD simulation. SMAEA displayed π-π interaction with Phe23, electrostatic π-cation interaction with His18 and hydrophobic packing with Ala13 and Val17; whereas SMAQA showed a selective interaction with amylin's C terminus (residues 31-37) that belongs to one of the two ß-sheet regions (residues 14-19 and 31-36) involved in amylin fibrillation. Toxicity analysis showed both SMA copolymers to be non-toxic in vitro and the amylin species formed with the copolymers showed minimal deformity to zebrafish embryos. Together, this study demonstrates that chemical tools, such as copolymers, can be used to modulate amylin aggregation, alter the conformation of species.

Amphiphilic Copolymers for Versatile, Facile, and In Situ Tunable Surface Biofunctionalization.

Precision surface engineering is key to advanced biomaterials. A new platform of PEGylated styrene-maleic acid copolymers for adsorptive surface biofunctionalization is reported. Balanced amphiphilicity renders the copolymers water-soluble but strongly affine for surfaces. Fine-tuning of their molecular architecture provides control over adsorptive anchorage onto specific materials-which is why they are referred to as "anchor polymers" (APs)-and over structural characteristics of the adsorbed layers. Conjugatable with an array of bioactives-including cytokine-complexing glycosaminoglycans, cell-adhesion-mediating peptides and antimicrobials-APs can be applied to customize materials for demanding biotechnologies in uniquely versatile, simple, and robust ways. Moreover, homo- and heterodisplacement of adsorbed APs provide unprecedented means of in situ alteration and renewal of the functionalized surfaces. The related options are exemplified with proof-of-concept experiments of controlled bacterial adhesion, human umbilical vein endothelial cell, and induced pluripotent cell growth on AP-functionalized surfaces.

Synthesis, characterization and catalytic activity of a mononuclear nonheme copper(II)-iodosylbenzene adduct.

Iodosylbenzene (PhIO) and its derivatives have attracted significant attention due to their various applications in organic synthesis and biomimetic studies. For example, PhIO has been extensively used for generating high-valent metal-oxo species that have been regarded as key intermediates in diverse oxidative reactions in biological system. However, recent studies have shown that metal-iodosylbenzene adduct, known as a precursor of metal-oxo species, plays an important role in transition metal-catalyzed oxidation reactions. During last few decades, extensive investigations have been conducted on the synthesis and reactivity studies of metal-iodosylbenzene adducts with early and middle transition metals including manganese, iron, cobalt. Nevertheless, metal-iodosylbenzene adducts with late transition metals such as nickel, copper and zinc, still remains elusive. Herein, we report a novel copper(II)-iodosylbenzene adduct bearing a linear ligand composed of two pyridine rings and an ethoxyethanol side-chain, [Cu(OIPh)(HN3O2)]2+ (1). The copper(II)-iodosylbenzene adduct was characterized by several spectroscopic methods including UV-vis spectroscopy, electrospray ionization mass spectrometer (ESI MS), and electron paramagnetic resonance (EPR) combined with theoretical calculations. Interestingly, 1 can carry out the catalytic sulfoxidation reaction. In sulfoxidation reaction with thioanisole under catalytic reaction condition, not only two-electron but also four-electron oxidized products such sulfoxide and sulfone were yielded, respectively. However, 1 was not an efficient oxidant towards CH bond activation and epoxidation reactions due to the steric hindrance created by the intramolecular H-bonding interaction between HN3O2 ligand and iodosylbenzene moiety.

Synthesis of Michael Adducts as Key Building Blocks for Potential Analgesic Drugs: In vitro, in vivo and in silico Explorations.

BACKGROUND: Organocatalytic asymmetric Michael addition is a strong approach for C-C bond formation. The objective of the study is to design molecules by exploiting the efficiency of Michael Adducts. We proceeded with the synthesis of Michael adducts by tailoring the substitution pattern on maleimide and trans-ß-nitro styrene as Michael acceptors. The synthesized compounds were evaluated for dual cyclooxygenases (COX) and lipoxygenase (LOX) inhibition. METHODS: The compounds (4, 9-11) were synthesized through Michael additions. The cyclooxygenases (COX-1 and 2) and lipoxygenase (5-LOX) assays were used for in vitro evaluations of compounds. After the acute toxicity studies, the in vivo analgesic potential was determined with acetic acid induced writhing, tail immersion, and formalin tests. Furthermore, the possible roles of adrenergic and dopaminergic receptors were also studied. Extensive computational studies were performed to get a better understanding regarding the binding of this compound with protein target. RESULTS: Four Michael adducts (4, 9-11) were synthesized. Compound 4 was obtained in enantio- and diastereopure form. The stereopure compound 4 showed encouraging COX-1 and-2 inhibitions with IC50 values of 128 and 65 µM with SI of 1.94. Benzyl derivative 11 showed excellent COX-2 inhibition with the IC50 value of 5.79 µM and SI value 7.96. Compounds 4 and 11 showed good results in in vivo models of analgesia like acetic acid test, tail immersion, and formalin tests. Our compounds were not active in dopaminergic and adrenergic pathways and so were acting centrally. Through extensive computational studies, we computed binding energies, and pharmacokinetic predictions. CONCLUSION: Our findings conclude that our synthesized Michael products (pyrrolidinedione 4 and nitroalkane 11) can be potent centrally acting analgesics. Our in silico predictions suggested that the compounds have excellent pharmacokinetic properties. It is concluded here that dual inhibition of COX/LOX pathways provides a convincing step towards the discovery of safe lead analgesic molecules.

Production of Enantiopure Chiral Epoxides with E. coli Expressing Styrene Monooxygenase.

Styrene monooxygenases are a group of highly selective enzymes able to catalyse the epoxidation of alkenes to corresponding chiral epoxides in excellent enantiopurity. Chiral compounds containing oxirane ring or products of their hydrolysis represent key building blocks and precursors in organic synthesis in the pharmaceutical industry, and many of them are produced on an industrial scale. Two-component recombinant styrene monooxygenase (SMO) from Marinobacterium litorale was expressed as a fused protein (StyAL2StyB) in Escherichia coli BL21(DE3). By high cell density fermentation, 35 gDCW/L of biomass with overexpressed SMO was produced. SMO exhibited excellent stability, broad substrate specificity, and enantioselectivity, as it remained active for months and converted a group of alkenes to corresponding chiral epoxides in high enantiomeric excess (˃95-99% ee). Optically pure (S)-4-chlorostyrene oxide, (S)-allylbenzene oxide, (2R,5R)-1,2:5,6-diepoxyhexane, 2-(3-bromopropyl)oxirane, and (S)-4-(oxiran-2-yl)butan-1-ol were prepared by whole-cell SMO.

Supercritical CO2 Extraction of Palladium Oxide from an Aluminosilicate-Supported Catalyst Enhanced by a Combination of Complexing Polymers and Piperidine.

Precious metals, in particular Pd, have a wide range of applications in industry. Due to their scarcity, precious metals have to be recycled, preferably with green and energy-saving recycling processes. In this article, palladium extraction from an aluminosilicate-supported catalyst, containing about 2 wt% (weight%) of Pd (100% PdO), with supercritical CO2 (scCO2) assisted by complexing polymers is described. Two polymers, p(FDA)SH homopolymer and p(FDA-co-DPPS) copolymer (FDA: 1,1,2,2-tetrahydroperfluorodecyl acrylate; DPPS: 4-(diphenylphosphino)styrene), were tested with regards to their ability to extract palladium. Both polymers showed relatively low extraction conversions of approximately 18% and 30%, respectively. However, the addition of piperidine as activator for p(FDA-co-DPPS) allowed for an increase in the extraction conversion of up to 60%.