Resin infiltration of deproteinised natural occlusal subsurface lesions improves initial quality of fissure sealing.

The aim of this ex vivo study was to evaluate the infiltration capability and rate of microleakage of a low-viscous resin infiltrant combined with a flowable composite resin (RI/CR) when used with deproteinised and etched occlusal subsurface lesions (International Caries Detection and Assessment System code 2). This combined treatment procedure was compared with the exclusive use of flowable composite resin (CR) for fissure sealing. Twenty premolars and 20 molars revealing non-cavitated occlusal carious lesions were randomly divided into two groups and were meticulously cleaned and deproteinised using NaOCl (2%). After etching with HCl (15%), 10 premolar and 10 molar lesions were infiltrated (Icon/DMG; rhodamine B isothiocyanate (RITC)-labelled) followed by fissure sealing (G-ænial Flo/GC; experimental group, RI/CR). In the control group (CR), the carious fissures were only sealed. Specimens were cut perpendicular to the occlusal surface and through the area of the highest demineralisation (DIAGNOdent pen, KaVo). Using confocal laser-scanning microscopy, the specimens were assessed with regard to the percentage of caries infiltration, marginal adaption and internal integrity. Within the CR group, the carious lesions were not infiltrated. Both premolar (57.9%±23.1%) and molar lesions (35.3%±22.1%) of the RI/CR group were uniformly infiltrated to a substantial extent, albeit with significant differences (P=0.034). Moreover, microleakage (n=1) and the occurrence of voids (n=2) were reduced in the RI/CR group compared with the CR group (5 and 17 specimens, respectively). The RI/CR approach increases the initial quality of fissure sealing and is recommended for the clinical control of occlusal caries.

Micro-filled resin infiltration of fissure caries lesions in vitro.

OBJECTIVES: The aim of this in vitro study was to evaluate three treatment modalities [infiltrant resin (IR), micro-filled infiltrant resin (MFIR), infiltrant-sealant-combination (ISC)] regarding both their abilities to penetrate lesions differing in ICDAS-codes and to fill fissures and cavities. MATERIALS AND METHODS: Extracted human molars (n=90) showing fissure caries lesions with and without cavitations were etched with 15% hydrochloric acid (HCl) that was mixed with abrasives and a 15% HCl-solution (1:1). The etching gel was rubbed for 30s within the fissure and, if eligible, within the cavity using a brush. After this pretreatment an infiltrant (Icon; DMG; IR) or an infiltrant mixed with microfillers (MFIR) was applied. ISC included the application of an infiltrant followed by a fissure sealant (Helioseal; Ivoclar Vivadent) From each tooth slices showing a non-cavitated (based on ICDAS-2) or cavitated lesion part (based on ICDAS-3/5) were prepared. Lesion (LA) and penetration areas (PA) as well as the completeness of fissure and cavity filling were analyzed using dual staining and confocal laser scanning microscopy. RESULTS: Percentage penetration (PP) was calculated as 100×PA/LA. PP [median (25th/75th)] did not differ significantly between IR [95 (86/100)%], MFIR [93 (62/100)%] or ISC [89 (67/97)%] (p>0.05; Kruskal-Wallis test). All three materials filled about 90% of the dimensions of fissures and cavities (p>0.05; Kruskal-Wallis test). CONCLUSION: It can be concluded that MFIR seems to be suitable to fill fissures and cavities like a fissure sealant and that it penetrates fissure caries lesions similarly deep as the conventional infiltrant after an experimental etching regime. CLINICAL SIGNIFICANCE: The MFIR seems to combine advantages of the fissure sealing and the caries infiltration procedure.

Mechanical benefits of conservative restoration for dental fissure caries.

The principle of minimal intervention dentistry (MID) is to limit removal of carious tooth tissue while maximizing its repair and survival potential. The objective of this study is to explore the fracture resistance of a permanent molar tooth with a fissure carious lesion along with three clinical restoration procedures, namely one traditional and two conservative approaches, based upon MID. The traditional restoration employs extensive surgical removal of enamel and dentine about the cavity to eliminate potential risk of further caries development, while conservative method #1 removes significantly less enamel and infected dentine, and conservative method #2 only restores the overhanging enamel above the cavity and leaves the infected and affected dentine as it was. An extended finite element method (XFEM) is adopted here to analyze the fracture behaviors of both two-dimensional (2D) and three-dimensional (3D) modeling of these four different scenarios. It was found that the two conservative methods exhibited better fracture resistance than the traditional restorative method. Although conservative method #2 has less fracture resistance than method #1, it had significantly superior fracture resistance compared to other restorations. More important, after cavity sealing it may potentially enhance the opportunity for remineralization and improved loading bearing capacity and fracture resistance.

Treating pit-and-fissure caries: a systematic review and network meta-analysis.

For shallow or moderately deep pit-and-fissure lesions, various treatment options are available: (1) noninvasive treatments (e.g., fluoride application, antibacterial treatments, oral hygiene advice) avoid any dental hard tissue removal; (2) microinvasive treatments (e.g., sealing) remove only a few micrometers of hard tissues by etching; and minimally invasive methods (e.g., "preventive" resin/sealant restoration) remove carious dentin but avoid sacrificing sound tissues. We aimed at systematically reviewing and comparing these strategies for treating pit-and-fissure lesions in permanent teeth using network meta-analysis. Randomized or nonrandomized clinical trials investigating shallow or moderately deep primary caries lesions in fissured or pitted surfaces were included. We compared the risk of requiring invasive treatments or any retreatments in noninvasive, microinvasive, and minimally invasive treated lesions; untreated lesions were used as controls. Five electronic databases were systematically screened up to September 2013 and cross-referencing performed. Pairwise and network meta-analyses were performed and odds ratios and 95% confidence intervals (CI) calculated. Certainty of estimates was evaluated via GRADE criteria. From a total of 2,214 identified records, 14 studies representing 1,440 patients with 3,551 treated lesions were included. Pairwise meta-analysis found microinvasive and minimally invasive treated lesions to require less invasive retreatments than control lesions (odds ratios [95% confidence intervals]: 0.13 [0.07 to 0.26], 0.13 [0.03 to 0.50], respectively), whereas the estimate for noninvasively treated lesions remained nonsignificant (0.64 [0.39 to 1.06]). These findings were reflected in the strategy ranking stemming from network meta-analysis (first, minimally invasive; second, microinvasive; third, noninvasive). However, microinvasive treatment required significantly more total retreatments (including resealing) than minimally or noninvasive treatments. Due to limited study quality, the evidence was graded as low or very low. Clinical treatment decisions should consider the long-term sequelae and costs stemming from different therapies as well as their subjective impact on the patient. Available treatment options seem suitable for treating shallow or moderately deep pit-and-fissure lesions in permanent teeth; further conclusions are not possible.

The minimally invasive management of early occlusal caries: a practical guide.

Pits and fissures on the occlusal surfaces of posterior teeth are sites affected commonly by demineralisation caused by the caries process. Clinicians face daily challenges in detecting these lesions, accurately diagnosing their activity and choosing from a range of management options. Traditionally, the detection of an active (or potentially active) occlusal lesion invariably resulted in the preparation of a standardised occlusal cavity, often extending beyond the confines of diseased tissue, followed by the insertion of a direct restorative material, most commonly dental amalgam. The overwhelming weight of contemporary evidence now favours minimally invasive (MI) operative management when required (usually after non-operative prevention has failed), and a wide range of equipment, materials and operative techniques is available to help operators to preserve the maximum amount of healthy/repairable tooth tissue and to allow restoration with more biologically respectful, tooth-preserving materials. This paper aims to provide clinicians with practical guidance in the prevention, early detection, predictable diagnosis and minimally invasive management of early occlusal carious lesions.

The effect of different enamel surface treatments on microleakage of fissure sealants.

OBJECTIVE: The aim of this study was to evaluate the effects of different techniques of surface treatment on the microleakage of fissure sealants in permanent molar teeth in vitro. MATERIALS AND METHODS: 96 extracted impacted human third molars were randomly divided into 8 surface treatment groups (n=12/group) as 1. Er: YAG laser ; (Fidelis II, Fotona, Ljubljana, Slovenia) (125 mj, 20Hz) ; 2. Er: YAG laser + 37% H3PO4 (15s) ; 3. ER: AG laser + 37% H3PO4+Prime&Bond NT ; 4. Er: YAG laser + G Bond ; 5. Er: YAG laser + Prime&Bond NT ; 6. 37% H3PO4 ; 7. 37% H3PO4 + Prime&Bond NT ; 8. G Bond. Sealant material (Clinpro, 3M ESPE, Seefeld, Germany), was applied into the fissures and light-cured for 20s with LED (Bluephase C5, Ivoclar-Vivadent, Schaan, Liechtenstein). Specimens were subjected to thermocycling (1000×, 5-55°C, dwell time: 15s) and immersed in 0.5% basic fuchsin solution for 24h at 37°C. The samples were sectioned and scored on a 3 point rating scale using a light microscope with a magnification of ×20. One-way analysis of variance was used to analyze data. Multiple comparisons were analyzed using Bonferroni test (p=0.05). RESULTS: Er:YAG laser showed the highest microleakage scores whereas Er YAG laser + 37% H3PO4 showed the lowest. Although 37% H3PO4 group showed higher scores than Er:YAG laser + 37% H3PO4, the difference was not statistically significant. CONCLUSION: Etching fissures with phosphoric acid is sufficient prior to fissure sealant application.

Scanning electron microscope analysis of sealant penetration and adaptation in contaminated fissures.

OBJECTIVE: The objective of this study is to evaluate the penetration and adaptation of two different sealant materials applied under different conditions of contamination using scanning electron microscope (SEM) analysis. MATERIALS AND METHODS: A total of 56 extracted human third molar teeth were randomly assigned into eight equal groups. The treatment groups were defined by the combination of two sealant materials (glass ionomer fissure sealant "Fuji Triage" or resin-based fissure sealant "Clinpro TM") and four surface conditions (dry condition, water contamination, saliva contamination or saliva contamination and air-drying). Penetration depth, sealant adaptation and fissure types were evaluated under SEM after sectioning the teeth. Tukey's test and multiple linear regression analyses were used for statistical analysis. RESULTS: No significant difference in the sealant penetration and adaptation was found between both materials under dry conditions. However, under wet contaminations, resin-based sealant showed less adaptation and penetration with a significant difference when compared to glass ionomer sealant (P < 0.05). The multiple linear regression analyses revealed significant impact of different materials and types of contamination on the sealant penetration and adaptation. CONCLUSION: Glass ionomer sealant has better fissure penetration and more intimate adaptation than resin-based sealant under wet contamination conditions.

Caries detection and diagnosis, sealants and management of the possibly carious fissure.

The diagnosis and management of 'stained' or possibly carious pits and fissures is a difficult clinical problem. Historically, clinicians have restoratively intervened at an early stage because of concern that caries will progress unless completely removed and a restoration placed. However, this approach is destructive of tooth tissue and in the longer term may compromise the tooth as it enters the restoration re-restoration cycle. This paper aims to update the reader on developments in sealant technology and the use of sealants in caries prevention and management with an emphasis on the options available to manage the questionable fissure.

Quantitative light-induced fluorescence (QLF): a tool for early occlusal dental caries detection and supporting decision making in vivo.

OBJECTIVES: This study reports the development and assessment of a novel method using quantitative light-induced fluorescence (QLF), to determine whether QLF parameters ΔF and ΔQ were appropriate for aiding diagnosis and clinical decision making of early occlusal mineral loss by comparing QLF analysis with actual restorative management. METHODS: Following ethical approval, 46 subjects attending a dental teaching hospital were enrolled. White light digital (WL) and QLF images/analyses of 46 unrestored posterior teeth with suspected occlusal caries were made after a clinical decision had already been taken to explore fissures operatively. WL and QLF imaging/analysis were repeated after initial cavity preparation. The type of restorative treatment was determined by the supervising clinician independent of any imaging performed. Actual restorative management carried out was recorded as fissure sealant/preventive resin restoration (F/P) or class I occlusal restoration (Rest.) thus reflecting the extent of intervention (=gold standard). All QLF images were analysed independently. RESULTS: The results showed statistically significant differences between the two treatment groups ΔF (p=0.002) (mean 22.60 - F/P and 28.80 - Rest.) and ΔQ (p=0.012) (mean 230.49 - F/P and 348.30 - Rest.). CONCLUSIONS: ΔF and ΔQ values may be useful in aiding clinical diagnosis and decision making in relation to the management of early mineral loss and restorative intervention of occlusal caries. CLINICAL SIGNIFICANCE: QLF has the potential to be a valuable tool for caries diagnosis in clinical practice.

[Enamel laser conditioning before sealant application].

The purpose of this study was to investigate the advantages offered by enamel laser conditioning before sealants application. 150 teeth of 50 patients were subdivided randomly into three groups. In each patient one tooth was etched with 37% orthophosphoric acid for 30 seconds, a second one with Er:YAG laser and orthophosphoric acid for 30 seconds and a third one exclusively with laser beam. Checks of the integrity of sealants applied were made at 3, 6, 12 months. The group treated with laser and orthophosphoric acid showed the best retention scores after 3, 6, 12 months. Enamel laser conditioning before sealants application reduced sealants fractures and loss during the observation time span.

Oral diagnosis and treatment planning: part 5. Preventive and treatment planning for dental caries.

The practice of operative dentistry continues to evolve, to reflect the many changes occurring in society and in dental diseases and conditions. However, the belief that all questionable and early carious lesions should be restored still persists. This belief is largely based upon the concept that the removal of all carious tissue followed by meticulous restoration of the tooth is the treatment of choice for dental caries. Yet restorations are not permanent and do not cure caries, as the causes remain. On the other hand, preventive measures can remove or partially remove the causes, thereby reducing the risks for future caries recurrence at the same site or elsewhere in the mouth.

Survival of atraumatic restorative treatment (ART) sealants and restorations: a meta-analysis.

UNLABELLED: The purpose of this study is to perform a systematic investigation plus meta-analysis into survival of atraumatic restorative treatment (ART) sealants and restorations using high-viscosity glass ionomers and to compare the results with those from the 2005 ART meta-analysis. Until February 2010, four databases were searched. Two hundred four publications were found, and 66 reported on ART restorations or sealant survival. Based on five exclusion criteria, two independent reviewers selected the 29 publications that accounted for the meta-analysis. Confidence intervals (CI) and or standard errors were calculated and the heterogeneity variance of the survival rates was estimated. Location (school/clinic) was an independent variable. The survival rates of single-surface and multiple-surface ART restorations in primary teeth over the first 2 years were 93% (CI, 91-94%) and 62% (CI, 51-73%), respectively; for single-surface ART restorations in permanent teeth over the first 3 and 5 years it was 85% (CI, 77-91%) and 80% (CI, 76-83%), respectively and for multiple-surface ART restorations in permanent teeth over 1 year it was 86% (CI, 59-98%). The mean annual dentine lesion incidence rate, in pits and fissures previously sealed using ART, over the first 3 years was 1%. No location effect and no differences between the 2005 and 2010 survival rates of ART restorations and sealants were observed. The short-term survival rates of single-surface ART restorations in primary and permanent teeth, and the caries-preventive effect of ART sealants were high. CLINICAL RELEVANCE: ART can safely be used in single-surface cavities in both primary and permanent teeth. ART sealants have a high caries preventive effect.

Efficacy of a non-drilling approach to manage non-cavitated dentin occlusal caries in primary molars: a 12-month randomized controlled clinical trial.

BACKGROUND. Despite the efficacy of non-drilling approaches to manage non-cavitated dentin occlusal lesions (NCDOL) in permanent teeth, there is no data validating this type of therapy in the primary dentition. AIM. To compare the efficacy of a traditional fissure sealant in managing NCDOL in primary molars. DESIGN. This study is a randomized controlled clinical trial with a split-mouth design. Thirty schoolchildren with two NCDOL were selected and divided into two groups. The experimental group received a resin-based fissure sealant, whereas the control group was treated with a conventional composite resin. Treatment efficacy was evaluated after 1 year by means of clinical and radiographic examinations. RESULTS. The two treatment modalities were found to be similarly effective in managing DONCL in primary molars. CONCLUSION. For the management of non-cavitated dentin occlusal caries in primary teeth, the invasive approach can be replaced with non-drilling fissure sealing techniques.

Removal of organic debris with Er:YAG laser irradiation and microleakage of fissures sealants in vitro.

The current study was conducted to improve fissure sealing by pre-treatment with Er:YAG laser irradiation in order to remove organic debris. The surface morphology, surface roughness of fissure cavities, and the degree of microleakage after laser treatment were compared with those after bristle brush treatment in vitro. Sixty extracted human teeth were used in this study. The teeth were randomly divided into two groups of 30 each. Artificial fissures were prepared in all teeth into which artificial organic debris was placed. The debris in 30 teeth of one group was removed by means of Er:YAG laser system and the remaining 30 teeth were cleaned using a bristle brush with prophylaxis paste. Surface morphology and surface roughness of were analyzed in ten samples from each group by color laser three-dimensional (3D) microscopy and by scanning electron microscopic examination. The remaining samples were then filled with sealant and subjected to a microleakage test under thermocycling. Statistical analysis was performed using the Mann-Whitney U test; a value of p < 0.05 was considered significant. Morphologically, most of the debris was removed by Er:YAG laser treatment, whereas some fissures were not cleaned by bristle brush. However, microleakage test of both laser and etched brush methods showed similar results. Laser technique might facilitate good adaptation of resin sealant to enamel, because of an increase in surface roughness and favorable surface characteristics.

From prevention to therapy: minimal intervention with sealants and resin restorative materials.

The breakthrough discovery of the acid-etch procedure by Buonocore in the mid-1950s laid the groundwork for the development of pit and fissure sealant as the best preventive agent for use against the development and progression of pit and fissure caries. The acid-etch technique is also the foundational technology behind the ability for clinical dentistry to adapt to a more conservative, minimally invasive, approach to restorative dentistry. The 1970s saw the acid etch technique developed the first foray into minimally invasive operative approaches, which was termed the Preventive Resin Restoration. With the development of the etching of porcelain, additional uses of the acid-etch technique (not discussed here) have led to other conservative procedures such as the porcelain veneer technique and the restorative uses of bonded, etched porcelain, and bonded fixed partial dentures.

Effect of alkaline ph on sealing ability of white mineral trioxide aggregate

Objectives: The aim of this study was to evaluate microleakage of white mineral trioxide aggregate (WMTA) after its exposure to a range of alkaline environments during hydration.Study Design: Seventy single-rooted teeth were divided into 4 experimental and 2 control groups. All the teeth were instrumented, and their apices were resected. Root-end cavities were filled with WMTA in the experimental groups. In the control groups, root-end cavities were not filled. Root-end fillings were exposed to alkaline environments with pH values of 7.4, 8.4, 9.4, or 10.4 for 3 days. Microleakage was evaluated by bovine serum albumin.Evaluations were carried out at 24-hour intervals for 80 days. Data were analyzed by one-way analysis of variance and a post hoc Tukey test at the 0.05 level of confidence.Results: The number of days (mean ± standard deviation) needed for color change at pH values of 7.4, 8.4, 9.4, and10.4 were 78.53 ± 5.68, 80.00 ± 0.00, 68.93 ± 19.00, and 34.46 ± 12.73, respectively. The time needed for leakageto occur was significantly shorter in samples stored at a pH value of 10.4 (P<0.001).Conclusions: Within the limits of this study, it can be concluded that pH values greater than 9.4 may jeopardizethe sealing ability of WMTA during hydration (AU)

Minimally invasive caries removal using bio-active glass air-abrasion.

OBJECTIVES: Alumina air-abrasion has been used to clean teeth and shown to over-prepare access cavity preparation to caries. This study investigated the working hypothesis that bio-active glass air-abrasion is more self-limiting than alumina for minimally invasive caries removal. METHODS: Human extracted molars were scored visually using ICDAS II criteria, divided into sound and carious groups and air-abraded with alumina (n=10) and bio-active glass (n=10) in each group, using identical operating parameters. The amount of enamel removed was semi-quantitatively assessed using scanning electron microscopy. Operating time was recorded. RESULTS: Bio-active glass abrasion removed extrinsic stain and substantial quantities of enamel from all carious fissures but not from sound, where only minimal microscopic surface modifications were observed. Alumina air-abrasion resulted in faster extrinsic stain and clinically substantial enamel removal in both sound and carious groups equally. CONCLUSIONS: Bio-active glass air-abrasion appeared to show a significant self-limiting tendency towards demineralised enamel and extrinsic stain removal but was slower in comparison to alumina air-abrasion. Self-limiting bio-active glass air-abrasion could be used clinically to clean teeth, detect caries and minimally prepare carious enamel as part of MI caries access or placing a sealant restoration.

Clinical evaluation of glass ionomer for pit and fissure sealing of fully erupted molars.

The aim of this study was to evaluate the clinical behavior of two conventional glass ionomers used for pit and fissure sealing in terms of retention, marginal adaptation, caries recurrence and cracking. Eighty-three fully erupted first permanent molars were sealed, in a group of children aged 5 to 8 years. A double-blind, single operator, paired design was used. Materials applied were Fuji IX and VII. Retention (R), presence of caries (PC), marginal discoloration (MD), marginal adaptation (MA) and cracking (C) were evaluated at 6 and 12 months using Ryge's criteria. Data registered 6 months after treatment were: Fuji IX: R: Alpha 37, Bravo 2, Charlie: 4; PC: Alpha 43, Bravo: 0; MA: Alpha 38, Bravo: 1; MD: Alpha 39, Bravo: 0, Charlie: 0; C: Alpha 39, Bravo: 0. Fuji VII: R: Alpha 29, Bravo 4, Charlie: 7; PC: Alpha 40, Bravo: 0; MA: Alpha: 34, Bravo: 0; MD: Alpha: 34, Bravo: 0, Charlie: 0; C: Alpha 33, Bravo: 0. Results after one year were: Fuji IX: R: Alpha 33, Bravo: 3, Charlie: 9; PC: Alpha 44, Bravo: 1; MA: Alpha 33, Bravo: 1; MD: Alpha: 34, Bravo: 0, Charlie: 0; C: Alpha: 34, Bravo: 0. Fuji VII: R: Alpha 22, Bravo 4, Charlie: 13, PC: Alpha 40, Bravo: 0; MA: Alpha 23, Bravo: 1; MD: Alpha 23, Bravo: 1, Charlie: 0; C: Alpha 23, Bravo: 1. Statistical analysis using Fisher test showed no significant difference (p > 0.05) for R, and MA. For PC, MD and C, values are not reported because both materials showed the same results. The second control showed no significant difference (p > 0.05) for R, MA, PC, MD and C. Results suggest no difference between Fuji IX and Fuji VII as sealants in fully erupted permanent molars.

What is different in operative dentistry?

There have been both large and small changes in operative dentistry in the last 30 years. Extension for prevention is no longer the mantra. The design features of amalgam preparations have moved into the smallest preparations possible to gain full access to the carious dentin. The default Class 2 amalgam or resin composite is a slot preparation with no preparation of the occlusal fissures. Class 1 fissure caries once implied the entire fissure system was to be cut out. Now only the known carious portions of the fissure are cut away, the tooth is restored, and the remaining fissures in that tooth are sealed. Resin composite preparations have no depth requirements and saucer shaped boxes are more favorable for lowering shrinkage strains on the bonded walls. Re-mineralization of proximal lesions that can be seen on a radiograph is now a proven successful service for many lesions that are at or just into the dentin by radiographic interpretation. The largest paradigm shift has been in the decision that in vital teeth with normal pulps soft dentin can be left over a vital asymptomatic pulp with every expectation that the direct restoration will be successful long term.