Miniaturized flexible micro-tube plasma ionization source for the effective ionization of non-easily ionizable pesticides in food with liquid chromatography/mass spectrometry.

In this article, we have studied the potential of flexible microtube plasma (FµTP) as ionization source for the liquid chromatography high-resolution mass spectrometry detection of non-easily ionizable pesticides (viz. nonpolar and non-ionizable by acid/basic moieties). Phthalimide-related compounds such as dicofol, dinocap, o-phenylphenol, captan, captafol, folpet and their metabolites were studied. Dielectric barrier discharge ionization (DBDI) was examined using two electrode configurations, including the miniaturized one based on a single high-voltage (HV) electrode and a virtual ground electrode configuration (FµTP), and also the two-ring electrode DBDI configuration. Different ionization pathways were observed to ionize these challenging, non-easily ionizable nonpolar compounds, involving nucleophilic substitutions and proton abstraction, with subtle differences in the spectra obtained compared with APCI. An average sensitivity increase of 5-fold was attained compared with the standard APCI source. In addition, more tolerance with matrix effects was observed in both DBDI sources. The importance of the data reported is not just limited to the sensitivity enhancement compared to APCI, but, more notably, to the ability to effectively ionize nonpolar, late-eluting (in reverse-phase chromatography) non-ionizable compounds. Besides o-phenylphenol ([M - H]-), all the parent species were efficiently ionized through different mechanisms involving bond cleavages through the effect of plasma reagent species or its combination with thermal degradation and subsequent ionization. This tool can be used to figure out overlooked nonpolar compounds in different environmental samples of societal interest through non-target screening (NTS) strategies.

Concentrations, generation and risk characterization of phthalimide in tea-derived from folpet or not?

The fungicide folpet is rapidly degraded into phthalimide (PI) during both thermal processing and analytical procedures in sample preparation; thus, its residue definition has been modified into the sum of itself and PI. Tea is one of the world's most popular nonalcoholic beverages, where folpet is not listed as an applicable pesticide. To demonstrate how serious false-positives and overestimation in dietary risk are caused by the application of a new residue definition, the residue pattern of PI in made tea and processed tea leaves, along with its transfer rate during tea brewing and corresponding dietary risk, were investigated in the present study. The results revealed that PI residue in tea ranged from <10 µg/kg to 180 µg/kg with a median value of 10 µg/kg, 7.3 % of which was over the maximum residue limit established by EU (100 µg/kg, expressed as folpet). The PI residue in green tea was obviously higher than that in black, dark and oolong tea. Simulated heating experiments revealed that PI can arise from improper heating of folpet-free fresh tea leaves, and thus green tea bears a higher risk for its manufacturing employing a comparatively higher temperature. The transfer rate of PI during tea brewing was 104 ± 14 %. Nevertheless, the risk of PI through drinking tea was negligible to humans depending on the risk quotient (RQ) value, which was significantly lower than 1.

De novo formation of phthalimide from ubiquitous phthalic acid derivatives during the drying process of tea (Camellia sinensis) and selected herbal infusions.

It is well documented that under some circumstances phthalimide, a known degradation product of the fungicide folpet, can be formed as an artifact during gas chromatographic analysis. This fact explains one phthalimide source, but does not explain a great number of positive findings in the group of dried plant commodities obtained with an artifact-free analysis. Therefore, in the framework of this study, herbal and tea plants were grown in a glasshouse under the best possible protection against external environmental influences and ensuring the exclusion of the use of folpet. It was demonstrated that relevant amounts of phthalimide are formed during the drying process as part of the routine production of tea and herbals and in the absence of folpet. In this context, the presence of the widespread environmental chemical phthalic anhydride and its impact was investigated. We conclude that phthalimide is no reliable indicator for the active use of folpet.

3D Printed Microfluidic Device for Magnetic Trapping and SERS Quantitative Evaluation of Environmental and Biomedical Analytes.

Surface-enhanced Raman scattering (SERS) is an ideal technique for environmental and biomedical sensor devices due to not only the highly informative vibrational features but also to its ultrasensitive nature and possibilities toward quantitative assays. Moreover, in these areas, SERS is especially useful as water hinders most of the spectroscopic techniques such as those based on IR absorption. Despite its promising possibilities, most SERS substrates and technological frameworks for SERS detection are still restricted to research laboratories, mainly due to a lack of robust technologies and standardized protocols. We present herein the implementation of Janus magnetic/plasmonic Fe3O4/Au nanostars (JMNSs) as SERS colloidal substrates for the quantitative determination of several analytes. This multifunctional substrate enables the application of an external magnetic field for JMNSs retention at a specific position within a microfluidic channel, leading to additional amplification of the SERS signals. A microfluidic device was devised and 3D printed as a demonstration of cheap and fast production, with the potential for large-scale implementation. As low as 100 µL of sample was sufficient to obtain results in 30 min, and the chip could be reused for several cycles. To show the potential and versatility of the sensing system, JMNSs were exploited with the microfluidic device for the detection of several relevant analytes showing increasing analytical difficulty, including the comparative detection of p-mercaptobenzoic acid and crystal violet and the quantitative detection of the herbicide flumioxazin and the anticancer drug erlotinib in plasma, where calibration curves within diagnostic concentration intervals were obtained.

Determination of azoxystrobin, topramezone, acetamiprid, fluometuron and folpet in their commercially available pesticide formulations by liquid chromatography.

A rapid, simple, precise and accurate high performance liquid chromatographic (HPLC) analytical method was developed and validated for the determination of the active substances (a.s.) azoxystrobin, topramezone, acetamiprid, fluometuron and folpet in their respective commercially available formulations. The method was used for the analysis of samples under the frame of the national quality control program of plant protection products in the Greek market. Chromatographic separation of the active substances from additives and co-formulants is achieved using isocratic elution with acetonitrile and 0.1% phosphoric acid solution (60:40 v/v) at a flow rate of 0.4 mL min-1 on a C18 monolithic column (Chromolith Performance-RP18e 100 × 4.6 mm) and UV detection at 230 nm. Validation parameters of the method fulfilled acceptability criteria. Recovery of all individual compounds was in the range 97.8-100.9%. Precision expressed as relative standard deviation was lower than the theoretical values of the modified Horwitz equation. Correlation coefficients of linearity of response were better than 0.999. The benefits of the proposed method are significant reduction in analysis time and total cost since all analytes were determined with the same extraction procedures and chromatographic system. Analysis of real samples for all active ingredients confirmed fitness for purpose of the suggested method.

Multi-residue analysis of captan, captafol, folpet, and iprodione in cereals using liquid chromatography with tandem mass spectrometry.

In this study, we propose an improved analytical method for the multiresidue analysis of captan (plus its metabolite, tetrahydrophthalimide), folpet (plus its metabolite, phthalimide), captafol, and iprodione in cereals using liquid chromatography tandem mass spectrometry (LC-MS/MS). As captan, captafol, and folpet are easily degraded during homogenisation and extraction, samples were comminuted with liquid nitrogen, and both QuEChERS and ethyl acetate-based extraction workflows provided a satisfactory method performance. The optimised LC-MS/MS procedure with electrospray ionisation did not degrade these compounds, and offered sufficient method selectivity by resolving and minimising co-eluting matrix-derived interferences. The method also resolved the problem of non-specific mass spectra that these compounds usually produce on GC-MS analysis involving electron ionisation. The method performance was satisfactory for all 6 compounds at 0.01 mg kg-1 and higher levels of fortification, and validated as per the SANTE/11813/2017 guidelines of analytical quality control in a wide range of cereals including rice, wheat, sorghum, and corn. The method provides special advantage of simultaneous analysis of captan, and folpet along with their metabolites (tetrahydrophthalimide, and phthalimide, respectively) in combination with captafol, and iprodione in a single chromatographic run. Although iprodione is known to degrade to 3,5-dichloroaniline, since this metabolite is not a part of the residue definition, it was not included in the scope of this method. As the method demonstrates satisfactory selectivity, sensitivity, accuracy, precision, and robustness in a wide range of cereal matrices, it is recommended for regulatory testing of these compounds in cereals.

Improved analysis of captan, tetrahydrophthalimide, captafol, folpet, phthalimide, and iprodione in fruits and vegetables by liquid chromatography tandem mass spectrometry.

An improved liquid chromatography tandem mass spectrometry method is reported for the determination of residues of captan (+tetrahydrophthalimide), captafol, folpet (+phthalimide), and iprodione in fruits and vegetables. The optimized electrospray ionization parameters (high cone gas flow, and a low desolvation temperature) did not result in degradation of target compounds, rather they provided a significant advantage over the conventional GC-MS/MS methods, which lack sensitivity and repeatability. Strategies for minimizing losses in recovery of these compounds during sample preparation included cryogenic comminution, extraction with acidified ethyl acetate or acetonitrile, and dilution of the final extract with acidified water prior to LC-MS/MS analysis. The method performance complied with the SANTE/11813/2017 guidelines, with recoveries in the range of 70-120% at the LOQ of 0.01 mg/kg across the tested matrices at various pHs. The efficiency of the method was reflected in its precision (RSDs < 10%) for incurred residues.

A method based on precolumn derivatization and ultra high performance liquid chromatography with high-resolution mass spectrometry for the simultaneous determination of phthalimide and phthalic acid in tea.

Phthalimide can be formed from either the degradation of folpet and phosmet, or reaction of phthalic anhydride with primary amino groups. Consequently, the sum of phthalimide and folpet, expressed as folpet-residue definition, is highly prone to false-positive levels of folpet in tea. An analytical method is thus urgently needed to investigate the residue level and source of phthalimide in tea. In this work, we developed an accurate method of determining phthalimide and phthalic acid (the indicator of phthalic anhydride) by acetonitrile extraction and 3-bromopropyltrimethylammonium bromide derivatization coupled with ultra high performance liquid chromatography and high-resolution mass spectrometry. The method was validated, and linearity (correlation coefficients > 0.99) was obtained. Satisfactory recoveries at 10, 20, 50, and 100 µg/kg ranged from 76 to 117%, and the intra- and interday accuracies were <23%. The limit of quantification for phthalimide and phthalic acid was 10 µg/kg. The developed method was further successfully used to determine phthalimide and phthalic acid in some tea samples. The positive rate of phthalimide and phthalic acid detected in the tea samples ranged from 30-75 and 50-90%, respectively.

Quantification of folpet and phthalimide in tea and herbal infusions by LC- high-resolution MS and GC-MS/MS.

Two methods based on a modified QuEChERS sample preparation and either LC coupled to atmospheric pressure ionisation and high-resolution MS or GC coupled to electron ionisation and tripled quadrupole MS have been assessed for the quantification of folpet and phthalimide in tea and other dry herbal infusions. Both methods have been fully validated in green tea and further checked in black tea, verbena and rooibos, and they performed according to the SANTE/11813/2017 criteria at the target LOQ concentration level (50 µg/kg). These methods allow the accurate quantification of folpet in the selected matrices according to the new EU residue definition, which includes phthalimide. Phthalimide is the main metabolite and degradation product of folpet, although according to recent studies, it could be generated from different sources than folpet breakdown, such as food processing or analysis by GC.

Quantification of folpet and phthalimide in food by gas chromatography and mass spectrometry: Overcoming potential analytical artefacts.

Accurate quantification of folpet is problematic because it degrades into phthalimide during sample preparation and analysis by gas chromatography (GC). Thus, EU regulation was recently modified to include phthalimide in the folpet residue definition. However, recent studies have shown that phthalimide could also be generated from different sources, which could lead to an overestimation of the phthalimide content and therefore to false positives. GC coupled with either negative chemical ionisation and single quadrupole mass spectrometry, or electron ionisation with triple quadrupole mass spectrometry (GC-EI-MS/MS), were evaluated for the determination of folpet and phthalimide in food. Both methods were validated in 4 different matrices namely apple puree, rice flour, raspberry puree and infant formula. Better selectivity and precision were obtained with GC-EI-MS/MS. Negligible amounts of phthalimide was found in blank matrices, and validation results met the SANTE/11813/2017 criteria in all matrices at the LOQ concentration levels by using GC-EI-MS/MS.

A new simple phthalimide-based fluorescent probe for highly selective cysteine and bioimaging for living cells.

A new turn-on phthalimide fluorescent probe has designed and synthesized for sensing cysteine (Cys) based on excited state intramolecular proton transfer (ESIPT) process. It is consisted of a 3-hydroxyphthalimide derivative moiety as the fluorophore and an acrylic ester group as a recognition receptor. The acrylic ester acts as an ESIPT blocking agent. Upon addition of cystein, intermolecular nucleophilic attack of cysteine on acrylic ester releases the fluorescent 3-hydroxyphthalimide derivative, thereby enabling the ESIPT process and leading to enhancement of fluorescence. The probe displays high sensitivity, excellent selectivity and with large Stokes shift toward cysteine. The linear interval range of the fluorescence titration ranged from 0 to 1.0×10-5M and detection limit is low (6×10-8M). In addition, the probe could be used for bio-imaging in living cells.

Lipophilic properties of anti-Alzheimer's agents determined by micellar electrokinetic chromatography and reversed-phase thin-layer chromatography.

Lipophilicity as one of the most important physicochemical properties of the biologically active compounds is closely related to their pharmacokinetic parameters and therefore, it is taken into account at the design stage of new drugs. Among the novel, fast, and reliable methods for determination of the lipophilicity of compounds micellar electrokinetic chromatography (MEKC) is considered to be an appropriate one for bioactive molecules, as it closely mimics the physiological conditions. In this paper MEKC was used for the estimation of log P values for 49 derivatives of phthalimide, tetrahydroisochinoline and indole, designed and synthesized as potential anti-Alzheimer's agents with cholinesterase inhibitory activity. RP-TLC method was applied for determination of another lipophilicity descriptor - RM0 . The results of both experimental methods were compared with each other giving satisfactory correlation (R = 0.784), and with computational methods (Marvin, ChemOffice Software) resulting in weaker correlation (R = 0.466-0.687). The lipophilicity-activity relationship was finally established, showing significant influence of lipophilicity on cholinesterase inhibition in some subgroups of phthalimide derivatives.

A review of methods for the analysis of orphan and difficult pesticides: glyphosate, glufosinate, quaternary ammonium and phenoxy acid herbicides, and dithiocarbamate and phthalimide fungicides.

This article reviews the chromatography/MS methodologies for analysis of pesticide residues of orphan and difficult chemical classes in a variety of sample matrixes including water, urine, blood, and food. The review focuses on pesticide classes that are not commonly included in multiresidue analysis methods such as highly polar or ionic herbicides including glyphosate, glufosinate, quaternary ammonium, and phenoxy acid herbicides, and some of their major degradation or metabolite products. In addition, dithiocarbamate and phthalimide fungicides, which are thermally unstable and have stability issues in some solvents or sample matrixes, are also examined due to their special needs in residue analysis.

Determination of flumioxazin residue in food samples through a sensitive fluorescent sensor based on click chemistry.

A sensitive and selective fluorescent sensor for flumioxazin was designed based on the formation of strong fluorescence compound (1,2,3-triazole compounds) via the reaction of the alkynyl group in flumioxazin with 3-azido-7-hydroxycoumarin, a weak-fluorescent compound, through the Cu(+)-catalysed azide-alkyne cycloaddition (CuAAC) reaction. The fluorescence increase factor (represented by F/F0) of the system exhibited a good linear relationship with the concentrations of flumioxazin in the range of 0.25-6.0 µg/L with a detection limit of 0.18 µg/L (S/N=3). Also, the proposed fluorescent sensor demonstrated good selectivity for flumioxazin assay even in the presence of high concentration of other pesticides. Based on such high sensitivity and selectivity, the proposed fluorescent sensor has been applied to test the flumioxazin residue in some vegetable and water samples with satisfied results.

Systematic toxicological analysis revealing a rare case of captan ingestion.

This article presents a case of suicide by intoxication with various pharmaceuticals, particularly anticonvulsants, combined with the fungicide captan. A cause of death could not be ascertained at autopsy. However, systematic toxicological analysis (STA) including a screening via solid-phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS) for (semi) volatile organic compounds revealed results suggesting a possible cause of death. The effects of captan on the human organism, its metabolism, and distribution will be discussed. Macroscopically, the cause of death was unascertained. STA revealed clonazepam, citalopram, and its metabolites, lamotrigine, levetiracetam, lacosamide, clonazepam, captan, and its metabolite tetrahydrophthalimide (THPI). For the first time, it was detected in human viscera. A quantification of THPI was performed to obtain distribution in the organs. The significance of a complete STA must be emphasized. The presence of THPI would have been missed without previous detection of captan. Consequently, this fatality would not have been investigated satisfactorily.

Novel colorimetric molecular switch based on copper(I)-catalyzed azide-alkyne cycloaddition reaction and its application for flumioxazin detection.

A novel colorimetric switch based on the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction has been developed. G-quadruplex-hemin DNAzyme catalyzes the oxidation of 2,2'-azinobis(3-ethylbenzothiozoline)-6-sulfonic acid (ABTS) to form ABTS˙(+), the UV absorbance of the solution increased greatly and the color of the solution changed to dark green. However, in the presence of an azide complex, the absorbance signal decreased and the solution became light green since the catalytic ability of the hemin was inhibited by the azide groups. However, once propargylamine has been added into the above reaction system, which would react with azide groups through the CuAAC reaction, the solution becomes dark green again and the absorption intensity of the system is also increased. The proposed switch allows a good reversibility and can be identified clearly by the naked eye. In addition, the method has been applied to detect some pesticides, which have alkynyl groups (flumioxazin), with high sensitivity and selectivity, where the UV absorbance has a direct linear relationship with the logarithm of flumioxazin concentrations in the range of 0.14-14 nM, and the limit of detection was 0.056 nM (S/N = 3), which can meet the requirement of the maximum residue limits (MRLs) of United States of America (56 nM).

Groundwater from infiltration galleries used for small public water supply systems: contamination with pesticides and endocrine disruptors.

Infiltration galleries are among the oldest known means used for small public water fountains. Owing to its ancestral origin they are usually associated with high quality water. Thirty-one compounds, including pesticides and estrogens from different chemical families, were analysed in waters from infiltration galleries collected in Alto Douro Demarcated Wine region (North of Portugal). A total of twelve compounds were detected in the water samples. Nine of these compounds are described as presenting evidence or potential evidence of interfering with the hormone system of humans and wildlife. Although concentrations of the target analytes were relatively low, many of them below their limit of quantification, four compounds were above quantification limit and two of them even above the legal limit of 0.1 µg/L: dimethoate (30.38 ng/L), folpet (64.35 ng/L), terbuthylazine-desethyl (22.28 to 292.36 ng/L) and terbuthylazine (22.49 to 369.33 ng/L).

Estimation of sampling uncertainty for determination of pesticide residues in plant commodities.

In order to provide residue data for refining the estimated sampling uncertainty, a coordinated research program was initiated for performing field studies on residues in individual items of leafy vegetables, small and large crops. The trials were carried out in 13 countries with 3 small fruits, 5 large crops, 2 medium/large crops and 3 leafy vegetables. The 25 pesticide active ingredients applied represented the dicarboximide (3), organophosphorus (8), synthetic pyrethroids (5), phthalimides (2), organochlorine (1) and other types of pesticides (6). In addition, 11 supervised field trials were performed in grapes and lettuce by the pesticide manufacturers, and their results were provided for evaluation. The studies represented actual agriculture practice around the world, and provide reliable data for estimation of sampling uncertainty. Based on the 12346 residue data, the best estimate for the relative sampling uncertainty for composite samples, assuming sample size of 10 for small crops and leafy vegetables and 5 for large crops, with 95% confidence limits in brackets are: small commodities: 0.25 (0.20-0.29); Brassica leafy vegetables: 0.20 (0.16-0.24); large commodities: 0.33 (0.29-0.38).

[Determination of flumioxazin residue in foods using gas chromatography-mass spectrometry].

A method for the determination of flumioxazin residue in foods by gas chromatography-mass spectrometry (GC-MS) has been developed. The food sample was extracted with acetonitrile or ethyl acetate, concentrated in a rotary evaporator, then dissolved in acetonitrile-methyl benzene (3 : 1, v/v) and purified with an NH2-solid phase extraction (SPE) column. The final extract was analyzed by gas chromatography-mass spectrometry with selected ion monitoring mode (GC-MS-SIM). External standard method was used for the quantification. The mean recoveries of flumioxazin spiked in foods were 79.4% - 101%, and the relative standard deviations were 0.242% -7.15% (n = 10). The detection limit for each was 0.01 mg/kg. This method has high sensitivity, veracity and is suitable for the determination of pesticide residues in foods.

Analysis of captan, folpet, and captafol in apples by dispersive liquid-liquid microextraction combined with gas chromatography.

A novel method was developed for the determination of captan, folpet, and captafol in apples by dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-electron capture detection (GC-ECD). Some experimental parameters that influence the extraction efficiency, such as the type and volume of the disperser solvents and extraction solvents, extraction time, and addition of salt, were studied and optimized to obtain the best extraction results. Under the optimum conditions, high enrichment factors for the compounds were achieved ranging from 824 to 912. The recoveries of fungicides in apples at spiking levels of 20.0 microg kg(-1) and 70.0 microg kg(-1) were 93.0-109.5% and 95.4-107.7%, respectively. The relative standard deviations (RSDs) for the apple samples at 30.0 microg kg(-1) of each fungicide were in the range from 3.8 to 4.9%. The limits of detection were between 3.0 and 8.0 microg kg(-1). The linearity of the method ranged from 10 to 100 microg kg(-1) for the three fungicides, with correlation coefficients (r (2)) varying from 0.9982 to 0.9997. The obtained results show that the DLLME combined with GC-ECD can satisfy the requirements for the determination of fungicides in apple samples.