Safety, Pharmacokinetics, and Pharmacodynamics of Midazolam Gel After Rectal Administration in Healthy Chinese Subjects.

BACKGROUND AND OBJECTIVES: Midazolam rectal gel is a novel rectal formulation that may be a promising and potential alternative to oral administration for pediatric sedation. The objective of this study was to evaluate the safety, pharmacokinetics, pharmacodynamics, and absolute bioavailability of midazolam rectal gel in healthy Chinese subjects. METHODS: An open-label, single-dose, randomized, two-period, two-treatment, crossover clinical study was conducted in 22 healthy subjects (16 males and six females), each receiving 2.5 mg intravenous midazolam in one period and 5 mg midazolam rectal gel in another period (the dosages here were calculated as active midazolam). Safety, pharmacokinetic, and pharmacodynamic assessments were conducted throughout the study. RESULTS: All of the subjects completed both treatment periods. The formulation of rectal gel was well tolerated, with no serious adverse events occurring. After a single rectal dose of 5 mg midazolam rectal gel, it was absorbed rapidly with a median value of time to peak concentration (Tmax) of 1.00 h, and mean values of the peak concentration (Cmax) and area under the concentration-time curve (AUC0-t) of 37.2 ng/mL and 137 h·ng/mL, respectively. The absolute bioavailability of rectal gel was 59.7%. The rectal gel exhibited a relatively delayed onset but a more stable sedative effect and a longer duration when compared with intravenous midazolam. CONCLUSION: Midazolam rectal gel may be a feasible alternative with a high level of acceptance in pediatric sedation and enhanced bioavailability compared to an oral formulation. The modeling results may help to disclose out the exposure-response relationship of midazolam rectal gel and support the design of an escalating-doses study and pediatric extrapolation study. CLINICAL TRIAL REGISTRATION: The study was registered at http://www.chinadrugtrials.org.cn (No. CTR20192350).

Formulation of Ocular In Situ Gels with Lithuanian Royal Jelly and Their Biopharmaceutical Evaluation In Vitro.

Royal jelly is a natural substance produced by worker bees that possesses a variety of biological activities, including antioxidant, anti-inflammatory, antibacterial, and protective. Although fresh royal jelly is kept at low temperatures, to increase its stability, it needs to be incorporated into pharmaceutical formulations, such as in situ gels. The aim of this study was to formulate in situ ocular gels containing Lithuanian royal jelly for topical corneal use in order to increase the retention time of the formulation on the ocular surface and bioavailability. Gels were evaluated for physicochemical characteristics (pH, rheological properties, refractive index) and in vitro drug release measuring the amount of 10-hydroxy-2-decenoic acid (10-HDA). An ocular irritation test and cell viability tests were performed using the SIRC (Statens Seruminstitut Rabbit Cornea) cell culture line. Results indicated that all the in situ gels were within an acceptable pH and refractive index range close to corneal properties. Rheology studies have shown that the gelation temperature varies between 25 and 32 °C, depending on the amount of poloxamers. The release studies have shown that the release of 10-HDA from in situ gels is more sustained than royal jelly suspension. All gel formulations were non-irritant according to the short-time exposure test (STE) using the SIRC cell culture line, and long-term cell viability studies indicated that the formulations used in small concentrations did not induce cell death. Prepared in situ gels containing royal jelly have potential for ocular drug delivery, and they may improve the bioavailability, stability of royal jelly, and formation of non-irritant ocular formulations.

Intranasal In Situ Gel of Apixaban-Loaded Nanoethosomes: Preparation, Optimization, and In Vivo Evaluation.

The present study was conducted to formulate ethosomal thermoreversible in situ gel of apixaban, an anticoagulant drug, for nasal delivery. Ethosomes were formed, of lecithin, cholesterol, and ethanol, by using thin-film hydration method. The prepared ethosomes were characterized by Zetasizer, transmission electron microscope, entrapment efficiency, and in vitro study. The selected ethosomal formula (API-ETHO2) was incorporated in gel using P407 and P188 as thermoreversible agents and carbopol 934 as mucoadhesive agent. Box-Behnken design was used to study the effect of independent variables (concentration of P407, P188, and carbopol 934) on gelation temperature, mucoadhesive strength, and in vitro cumulative percent drug released at 12h (response variables). The optimized formulation was subjected to compatibility study, ex vivo permeation, histopathological examination for the nasal mucosa, and in vivo study. API-ETHO2 was spherical with an average size of 145.1±12.3 nm, zeta potential of -20±4 mV, entrapment efficiency of 67.11%±3.26, and in vitro % release of 79.54%±4.1. All gel formulations exhibited an acceptable pH and drug content. The optimum gel offered 32.3°C, 1226.3 dyne/cm2, and 53.50% for gelation temperature, mucoadhesive strength, and in vitro percent released, respectively. Apixaban ethosomal in situ gel evolved higher ex vivo permeation (1.499±0.11 µg/cm2h) through the nasal mucosa than pure apixaban gel. Histopathological study assured that there is no necrosis or tearing of the nasal mucosa happened by ethosomal gel. The pharmacokinetic parameters in rabbit plasma showed that intranasal administration of optimized API-ethosomal in situ gel achieved higher Cmax and AUC0-∞ than unprocessed API nasal gel, nasal suspension, and oral suspension. The ethosomal thermoreversible nasal gel established its potential to improve nasal permeation and prolong anticoagulant effect of apixaban.

Pharmacokinetics of UGN-101, a mitomycin-containing reverse thermal gel instilled via retrograde catheter for the treatment of low-grade upper tract urothelial carcinoma.

PURPOSE: To evaluate the pharmacokinetic properties of UGN-101, a mitomycin-containing reverse thermal gel used as primary chemoablative treatment for low-grade upper tract urothelial carcinoma (UTUC), in a subset of patients participating in a phase 3 clinical trial. METHODS: Pharmacokinetic parameters (Cmax, Tmax, AUC(0-6), λz, t½, and AUCinf) were evaluated in six participants (male or female, ≥ 18 years) with biopsy-proven, low-grade UTUC who received the first of 6 once-weekly instillations of UGN-101 to the renal pelvis and calyces via retrograde ureteral catheter. Plasma samples were collected prior to instillation and 30 min, 1, 2, 3, 4, 5, and 6 h post-instillation. Safety was assessed by laboratory evaluations, physical exam, and adverse event monitoring. RESULTS: The mean age of the six participants was 69 years; most were male (5/6) and Caucasian (5/6). Mean (SD) Cmax was 6.24 (4.11) ng/mL and mean Tmax was 1.79 (1.89) hours after instillation. Mean apparent t½ following instillation was 1.27 (0.63) hours. Mean total systemic exposure to mitomycin up to 6 h post-instillation was 20.30 (19.69) ng h/mL. At 6 h post-instillation, mitomycin plasma concentrations of 5/6 participants were < 2 ng/mL. There were no clinically important adverse events or changes in laboratory values in any participant after a single instillation of UGN-101. CONCLUSION: The reverse thermal gel formulation of UGN-101 is associated with higher concentration and extended dwell time of mitomycin in contact with the urothelium of the upper urinary tract while limiting systemic absorption of mitomycin. REGISTRATION: NCT02793128; registered June 8, 2016.

Preparation and Characterization of Tacrolimus-Loaded SLNs in situ Gel for Ocular Drug Delivery for the Treatment of Immune Conjunctivitis.

BACKGROUND: The aim of this study is to develop a novel in situ gel of tacrolimus-loaded SLNs (solid lipid nanoparticles) for ocular drug delivery. METHODS: The optimal formulation was characterized by surface morphology, particle size, zeta potential, entrapment efficiency, drug loading and in vitro release behavior. In vivo studies were also conducted to evaluate the pharmacokinetic and pharmacodynamic results. RESULTS: In this study, TAC-SLNs ISG were prepared using homogenization followed by probe sonication method. The average particle size of TAC-SLNs ISG was observed to be 122.3±4.3 nm. Compared with TAC-SLNs, in situ gel did not increase particle size, and there was no significant difference between them. The results of viscosity measurement showed that TAC SLNs-ISG were typical of pseudo plastic systems and showed a marked increase in viscosity as temperature increased and ultimately formed a rigid gel (32°C). In vitro and in vivo studies illustrated the sustained release model of the drug from TAC-SLNs ISG. Animal model showed that TAC-SLNs ISG had good pharmacodynamics when compared with eye drops and SLNs. CONCLUSION: Our results demonstrated that TAC SLNs-ISG had the potential for being an ideal ocular drug delivery system.

Iron Ion-Releasing Polypeptide Thermogel for Neuronal Differentiation of Mesenchymal Stem Cells.

A poly(ethylene glycol)-based thermogel can capture an iron ion (Fe3+) through a crown ether-like coordination bond between the oxygen atom and metal ions, thus, providing a sustained Fe3+-releasing system. Poly(ethylene glycol)-l-poly(alanine) thermogel was used in this study. The polypeptide forms a rather robust gel, and the degradation products are a neutral amino acid, which provides cyto-compatible neutral pH environments during the cell culture. During the heat-induced sol-to-gel transition at 37 °C, tonsil-derived mesenchymal stem cells (TMSCs) and iron ions were incorporated, leading to the formation of a three-dimensional matrix toward neuronal differentiation of the incorporated TMSCs. The initial concentration of the iron ions was varied between 0, 15, 30, and 60 mM. About 10% of the loaded iron ions was released over 21 days, which continuously supplied iron ions to the cells. The incorporation of iron ions not only increased the gel modulus at 37 °C from 107 to 680 Pa, but also promoted cell aggregation with a significant secretion of the cell adhesion signal of FAK. Expression of biomarkers related to the neuronal differentiation of TMSCs, including NFM, MAP2, GFAP, NURR1, NSE, and TUBB3, increased 4-35-fold at the mRNA level in the Fe3+-containing system compared to that of the system without Fe3+. Immunofluorescence studies also confirmed pronounced cell aggregation and a significant increase in neuronal biomarkers at the protein level. This study suggests that an iron ion-releasing thermogelling system can be a promising injectable scaffold toward neuronal differentiation of stem cells.

Investigating The Retention Potential of Chitosan Nanoparticulate Gel: Design, Development, In Vitro & Ex Vivo Characterization.

INTRODUCTION: The main purpose of the research was to develop, optimize and characterize tobramycin sulphate loaded chitosan nanoparticles based gel in order to ameliorate its therapeutic efficacy, precorneal residence time, stability, targeting and to provide controlled release of the drug. METHODS: Box-Behnken design was used to optimize formulation by 3-factors (chitosan, STPP and tween 80) and 3-levels. Developed formulation was subjected for characterizations such as shape and surface morphology, zeta potential, particle size, in vitro drug release studies, entrapment efficiency of drug, visual inspection, pH, viscosity, spreadability, drug content, ex vivo transcorneal permeation studies, ocular tolerance test, antimicrobial studies, isotonicity evaluation and histopathology studies. RESULTS: Based on the evaluation parameters, the optimized formulation showed a particle size of 43.85 ± 0.86 nm and entrapment efficiency 91.56% ± 1.04, PDI 0.254. Cumulative in vitro drug release was up to 92.21% ± 1.71 for 12 hours and drug content was found between 95.36% ± 1.25 to 98.8% ± 1.34. TEM analysis unfolded spherical shape of nanoparticles. TS loaded nanoparticulate gel exhibited significantly higher transcorneal permeation as well as bioadhesion when compared with marketed formulation. Ocular tolerance was evaluated by HET-CAM test and formulation was non-irritant and well-tolerated. Histopathology studies revealed that there was no evidence of damage to the normal structure of the goat cornea. As per ICH guidelines, stability studies were conducted and were subjected for 6 months. CONCLUSION: Results revealed that the developed formulation could be an ideal substitute for conventional eye drops for the treatment of bacterial keratitis.

Extraction, formulation and characterization of an in vitro and ex-vivo evaluation of Thymus serpyllum L. (Thymus oil) from topical preparations using dialysis cellulose membrane and natural rabbit skin.

Herbal remedies like the Thymus serpyllum L. is useful in traditional medicine for the treatment of many diseases especially congestion, and bronchitis. The purpose of this study was to formulate a micro-emulsion, a gel and an ointment containing the plant hydro distilled thymus oil extracted from Thymus serpyllum L. collected from Ziarat, Balochistan. The prepared formulations were subjected to in-vitro and ex vivo study release, High performance Liquid Chromatography (HPLC), Thin Layer Chromatography (TLC), to justify their suitability for topical use. The in-vitro and ex-Vivo release was studied using Franz Cells and using two different kinds of membrane synthetic dialysis cellulose membrane and natural rabbit skin and the amount of drug released was determined by HPLC at λ 274nm. The three formulations result obtained through dialysis cellulose membrane showed the faster release than the natural rabbit skin. However, the micro-emulsion, gel formulation showed the same release except ointment. The release from the above mentioned formulation can be arranged in the following descending order. micro-emulsion > Gel > Ointment. The best fit of release kinetics was achieved by Krosmeyer- Peppas, the TLC and HPLC identifies the Thymol, isolation and quantification of the marker. This study demonstrates that it is necessary to assess the impact of release and permeability pattern of different formulations. In vitro and ex-vivo diffusion cell experiments can be utilized to develop formulations of traditional medicines identifies.

Nanosized nasal emulgel of resveratrol: preparation, optimization, in vitro evaluation and in vivo pharmacokinetic study.

Nano-emulgel has become one of the most significant controlled release systems, which has the advantages of both gels and nano-emulsions. This work aims at the formulation of nasal nano-emulgel for resveratrol, employing carbopol 934 and poloxamer 407 as the gelling agents. The optimum nano-emulsion was determined through further characterization of the selected system. The nasal nano-emulgel was prepared and tested for the in vitro release, the release kinetics, FTIR, ex vivo permeation, nasal mucosa toxicity, and in vivo pharmacokinetic study. The optimum nano-emulsion consisted of Tween 20, Capryol 90, and Transcutol at a ratio of (54.26: 23.81: 21.93%v/v), and it exhibited transmittance of 100%, resveratrol solubility of 159.9 ± 6.4 mg/mL, globule size of 30.65 nm. The in vitro resveratrol released from nano-emulsion and nasal nano-emulgel was 96.17 ± 4.43% and 78.53 ± 4.7%, respectively. Ex vivo permeation was sustained during 12 h up to 63.95 ± 4.7%. The histopathological study demonstrated that the formula is safe and tolerable to the nasal mucosa. Cmax and AUC (0-∞) of resveratrol obtained after nasal administration of nasal nano-emulgel was 2.23 and 8.05 times, respectively. Similarly, Tmax was increased up to 3.67 ± 0.82 h. The optimized nasal nano-emulgel established intranasal safety and bioavailability enhancement so it is considered as a well-designed system to target the brain.

Rheological Properties, Dissolution Kinetics, and Ocular Pharmacokinetics of Loteprednol Etabonate (Submicron) Ophthalmic Gel 0.38.

Purpose: To evaluate rheological properties, in vitro dissolution, and in vivo ocular pharmacokinetics of loteprednol etabonate (LE) (submicron) ophthalmic gel 0.38%. Methods: The viscosity of the LE gel 0.38% formulation was measured with a controlled stress rheometer. Dissolution kinetics were evaluated in a fixed-volume and flow-through assay. Rabbits received a single instillation of LE (submicron) gel 0.38% (both eyes), and concentrations of LE in ocular tissues were determined through 24 h by liquid chromatography with tandem mass spectrometry. Where indicated, comparators included micronized LE gel 0.38%, 0.5% (Lotemax® gel), and 0.75%. Results: LE (submicron) gel 0.38% exhibited shear-thinning characteristics similar to LE gel 0.5% with nearly identical yield stress. LE (submicron) gel 0.38% released 2.6-fold more LE into the dissolution medium than micronized LE gel 0.5% over 30 s in the fixed-volume dissolution assay, and submicron LE attained higher concentrations of dissolved LE than micronized LE gel 0.38% in the flow-through dissolution assay. In rabbits, the maximal concentration and area-under-the-curve over 24 h for LE in aqueous humor were 2.5- and 1.8-fold higher, respectively, for LE (submicron) gel 0.38% versus micronized LE gel 0.5% (both P < 0.001). Pharmacokinetic parameters were similar for most other tissues. Conclusions: LE (submicron) gel 0.38% demonstrated similar rheological properties to micronized LE gel 0.5% but faster dissolution, thus providing similar or higher LE concentrations in the aqueous humor, cornea, and iris-ciliary body after ocular dosing in rabbits despite a lowered concentration of drug in the formulation.

In Situ Forming Depot as Sustained-Release Drug Delivery Systems.

In situ forming systems can serve as promising alternative to existing long acting injectables like disperse systems and microspheres, owing to their biocompatibility, stability, ease of administration and scale up. Microspheres based on long-acting parenteral systems pose challenges in scaling up and process changes with the drug and polymer selected. In situ gelling systems are having low viscosity which is very conducive during various manufacturing unit operations and passing the formulation through hypodermic needle with lower applied pressure. Different mechanisms such as physical or physiological stimuli and cross linking reactions are involved in the gelling of in situ forming systems at the site of injection. Drug release from in situ forming systems can be altered according to the need by using different polymers, lipids and fatty acids. In situ forming systems can be evaluated by sol-gel transition time, temperature and pH, rheology, gel strength, texture analysis, syringeability and injectability. The present paper is an overview of the various in situ gelling polymers and their application in the preparation of depot formulations. Numerous products based on in situ forming systems such as Eligard®, Atridox® are available in market.

Design, preparation, and evaluation of liposomal gel formulations for treatment of acne: in vitro and in vivo studies.

The study highlights the significance of co-application of bioactive components into liposomal gel formulations and their comparison to azithromycin for treatment of Acne. A Design of Experiments (DoE) approach was utilized to obtain optimized liposomal formulation encapsulating curcumin, with size and zeta potential of ∼100 nm and ∼14 mV, respectively, characterized by DLS, HR-TEM, FESEM, and AFM. The curcumin liposomal dispersion depicted excellent stability over the period of 60 days, which was further converted in gel form using Carbopol. Pharmacokinetics of curcumin-loaded liposomal gel showed that Tmax for curcumin was achieved within 1 h of post application in both stratum corneum and skin, indicating quick penetration of nano-sized liposomes. Stratum corneum depicted Cmax of 688.3 ng/mL and AUC0-t of 5857.5 h × ng/mL, while the skin samples displayed Cmax of 203.3 ng/gm and AUC0-t of 2938.1 h × ng/gm. Lauric acid and azithromycin liposomal gel formulations were prepared as per the optimum parameters obtained by DoE. In antibacterial activity using agar diffusion assay, lauric acid gel formulation revealed ∼1.5 fold improved antibacterial effect than curcumin gel formulation. Interestingly, their co-application (1:1) exhibited significantly enhanced antibacterial effect against both macrolide-sensitive (1.81 versus 1.25 folds) and resistant strains of P. acnes (2.93 versus 1.22 folds) than their individual counterparts. The in vivo studies in rat ear model displayed a ∼2 fold reduction in comedones count and cytokines (TNF-α and IL-1ß) on co-application with curcumin and lauric acid liposomal gel compared to placebo treated group.

In vitro and ex-vivo evaluation of topical formulations designed to minimize transdermal absorption of Vitamin K1.

Topical application of Vitamin K1 has been demonstrated to effectively treat papulopustular skin rash, a serious and frequently encountered side effect of Epidermal Growth Factor Inhibitors (EGFRIs). Systemic absorption of vitamin K1 from skin and the resultant consequence of antagonizing EGFRIs anticancer effects jeopardizes the clinical acceptability of this rather effective treatment. The purpose of the present study was to rationally formulate and evaluate the release rate and transdermal absorption of a wide range of Vitamin K1 dermal preparations with a variety of physiochemical properties. A library of 33 formulations with were compounded and tested for Vitamin K1 permeation using hydrophobic membranes and porcine skin mounted in a Fran diffusion cells. Our results demonstrate the lowest diffusion for water-in-oil emulsions, which also demonstrated a negligible transdermal absorption. The statistical analysis showed a significant correlation between in vitro and ex vivo results. While viscosity did not have a significant impact on the diffusion or absorption of vitamin K1, an increase in the lipid content was correlated with an increase in transmembrane diffusion (not with transdermal absorption). Overall, formulation design significantly impacts the release rate and transdermal absorption of vitamin K1, and confirms the possibility of minimal systemic distribution of this vitamin for this specific purpose.

The possibility of healing alveolar bone defects with simvastatin thermosensitive gel: in vitro/in vivo evaluation.

BACKGROUND: In this study, simvastatin (SVT) in situ gels were successfully produced by our group. METHODS: The preparations were characterized in the following aspects: in vitro gelation, drug release, stability and pharmacodynamics. RESULTS: In this study, drug content of prepared gels was found to be in the range between 89 and 92%. The pH value was in the range between 6.5 and 7.0. The gelation temperature of the prepared thermogelling solutions was 37°C. In vitro release showed that the release of SVT from in situ gels was slow with burst effects at an early stage. Researches indicated that intraorally slow release SVT in situ gels could effectively promote bone regeneration repair of alveolar bone defect. CONCLUSION: This drug delivery system could prove to be a novel form able to prolong the residence time and to control the release of drug when administered into the oral cavity.

Sustained ocular delivery of Dorzolamide-HCl via proniosomal gel formulation: in-vitro characterization, statistical optimization, and in-vivo pharmacodynamic evaluation in rabbits.

Glaucoma is the second cause of blindness worldwide. Frequent administration of traditional topical dosage forms may lead to patient incompliance and failure of treatment. Our study aims to formulate proniosomal gel formulations that sustain the release of the water-soluble anti-glaucoma drug Dorzolamide-HCl (Dorz). Proniosomal gel formulations were prepared using coacervation phase separation method according to a 52 full factorial design. The effects of Cholesterol and surfactant (Span 40) amounts (independent variables) on the percentage entrapment efficiency (EE%), particle size (PS), and the percent of drug released after 8 h (Q8h) (dependent variables (DVs)) were investigated. An optimized formulation (OF) was chosen based on maximizing EE% and Q8h and minimizing PS. An intraocular pressure (IOP) pharmacodynamic study was performed in rabbits to evaluate the in-vivo performance of the OF-gel compared to the marketed Trusopt® eye drops. The results showed that the independent variables studied significantly affected EE%, PS, and Q8h. OF was the one containing 60 mg Cholesterol and 540 mg Span 40. It had desirability of 0.885 and its actually measured DVs deviated from the predicted ones by a maximum of 4.8%. The in-vivo pharmacodynamic study showed that OF could result in higher reduction in IOP, significantly sustain that reduction in IOP and increase Dorz bioavailability compared to Trusopt® eye drops. Thus the OF-gel is very promising for being used in glaucoma treatment.

Analysis of the Postoperative Periarticular Environment and Influence on Sustained Drug Delivery From a Gel Formulation.

Regional intraarticular delivery of local anesthetics is effective in treating postoperative pain following total knee or hip replacement. Recent research efforts have been only partially successful in achieving sustained release of the analgesic agent, in part due to limited understanding of the biological environment into which these formulations are administered. This study aimed to detail the composition and properties of postoperative periarticular fluid (PO-PAF). PO-PAF was collected from 8 patients, and the composition and physicochemical properties were determined. A number of components were identified which are lacking from phosphate buffered saline (PBS) or other synthetic media. The differences in composition led to variation in the physicochemical properties of PO-PAF compared with PBS. Notably, significantly lower surface tension (p <0.05) and higher buffer capacity (p <0.05) were observed in the biological fluid. We demonstrated that the solubility of lidocaine is almost double in PO-PAF compared to PBS (p <0.05) and that lidocaine release from a poloxamer gelling system occurred faster into PO-PAF under both sink and nonsink conditions. Collectively, these data indicate PBS is inappropriate for the in vitro evaluation of intraarticular drug delivery systems. The presented data describe that PO-PAF and will support the future development of biorelevant media to ultimately improve in vivo-in vitro correlation.

Effect of Bleaching Gel Viscosity on Tooth Whitening Efficacy and Pulp Chamber Penetration: An In Vitro Study.

OBJECTIVES: Whitening efficacy has been related to hydrogen peroxide (HP) diffusion into tooth structure. However, little information is available relating rheological properties to whitening efficacy. The purpose was to evaluate the whitening efficacy and HP penetration level of a 10% HP gel at three different viscosities and to compare them to a strip delivery system. METHODS AND MATERIALS: Extracted molars (n=120) were randomly assigned into five groups (n=24/ group): NC_MED (negative control; median): medium viscosity gel without HP; LOW: 10% HP gel (low viscosity experimental gel, Ultradent Products Inc); MED: 10% HP gel (medium viscosity experimental gel, Ultradent); HIGH: 10% HP gel (high viscosity gel, Ultradent); and CWS: Crest 3D Whitestrips 1-Hour Express (Procter & Gamble). All teeth were subjected to five 60-minute whitening sessions. Instrumental color measurements were performed at baseline (T0), and 1-day after each application (T1-T5), and 1-month after whitening (T6). HP penetration was estimated with leucocrystal violet and horseradish peroxidase. A Kruskal-Wallis test and post hoc Bonferroni test were performed to assess the difference in tooth color change and HP penetration among the groups (α=0.05). RESULTS: Hydrogen peroxide penetration levels and overall color changes at T6 were 0.24 µg/mL / 2.80; 0.48 µg/mL / 8.48; 0.44 µg/mL / 7.72; 0.35 µg/mL / 8.49; 0.36 µg/mL / 7.30 for groups NC, LOW, MED, HIGH, and CWS, respectively. There was a significant difference for HP penetration, while there was no significant difference among the four experimental groups for tooth color change. CONCLUSION: Rheological properties should be considered when developing new whitening formulations.

Statistical Design of Experiment (DoE) based development and optimization of DB213 in situ thermosensitive gel for intranasal delivery.

DB213 is an HIV-1 replication inhibitor targeting the Central Nervous System for the treatment of HIV-associated neurocognitive disorders. Current study aims to develop an in situ thermosensitive gelling system for intranasal delivery of DB213 facilitated by Statistical Design of Experiment (DoE) to conduct a more efficient experimentation by extracting the maximum amount of information from limited experiments. In our current study, information was extracted from twenty-five experimental designs from MODDE® Software and a mathematical model was successfully developed to predict formulations to achieve desired performance as well as to analyze relationships between the amount of Pluronic F-127, Pluronic F-68, Chitosan, DB213 and the performances of in situ thermosensitive gels. Based on DoE, in situ thermosensitive gels of 1% DB213 (F1) and 5% DB213 (F2) were developed for further in vivo bioavailability and brain uptake evaluations in Sprague-Dawley rats and C57BL/6 mice, respectively. In comparison to DB213 water solution, intranasal administrations of F1 at 1 mg/kg in rats and F2 at 25 mg/kg in mice demonstrated relative bioavailabilities of 145% and 165% with significant increase in brain uptake.

Improvement in Ocular Bioavailability and Prolonged Delivery of Tobramycin Sulfate Following Topical Ophthalmic Administration of Drug-Loaded Mucoadhesive Microparticles Incorporated in Thermosensitive In Situ Gel.

PURPOSE: Conventional topical delivery in hyperacute bacterial conjunctivitis and endophthalmitis is associated with low drug bioavailability due to rapid precorneal clearance. Hence, in the present investigation, an attempt has been made to enhance ocular bioavailability of tobramycin sulfate by formulating drug-loaded microparticles dispersed in thermosensitive in situ gel. METHODS: Microparticles prepared by emulsion-ionic gelation technique were characterized for drug loading, entrapment efficiency, particle size, surface morphology, and in vitro drug release. Consequently microparticles (F2 prepared with 1.5%w/v chitosan, 0.2%w/v tripolyphosphate, and drug, 30%w/w of polymer) with high drug loading and encapsulation efficiency were dispersed in thermosensitive in situ gel containing poloxamer 407 and varying percentage of chitosan. In situ gel containing drug-loaded microparticles were evaluated for gelation temperature, rheological behavior, mucoadhesive strength, in vitro drug release, in vitro permeation, ocular irritation, and bioavailability in aqueous humor of rabbits. RESULTS: Formulation containing 17%w/v poloxamer 407 and 0.5%w/v chitosan (P2) gelled at 32°C ± 1.5°C gave pseudoplastic behavior. In vitro permeability of tobramycin from the formulation P2 was found 2-folds greater than eye drops. It also gave significantly higher aqueous humor concentration of tobramycin compared with eye drops with no signs of ocular irritation. CONCLUSION: Thus, the formulation possesses high potential for treating ocular infections.

Sensitivity of doping biomarkers after administration of a single dose testosterone gel.

Micro-doping with testosterone (T) is challenging to detect with the current doping tests. Today, the methods available to detect T are longitudinally monitoring of urine biomarkers in the Athlete Biological Passport (ABP) and measuring the isotopic composition of excreted biomarkers to distinguish the origin of the molecule. In this study, we investigated the detectability of a single dose of 100 mg T gel in 8 healthy male subjects. We also studied which biomarkers were most sensitive to T gel administration, including blood biomarkers. The ABP successfully detected T gel administration in all 8 subjects. The most sensitive ratio was 5αAdiol/E, however, all ratios showed atypical findings. Isotope ratio mass spectrometry (IRMS) was performed on 5 subjects and only 2 met all the criteria for a positive test according to the rules set by the World Anti-Doping Agency (WADA). The other 3 showed inconclusive results. Other markers that were affected by T gel administration, not used for this detection today, were serum dihydrotestosterone (DHT) and T as well as reticulocyte count and percentage in whole blood. miRNA-122 was not significantly affected by the single T dose. A single dose of 100 mg T gel is possible to detect with today's doping tests. Since a single dose of T gel has an impact on some hematological biomarkers, access to both modules of the ABP when evaluating the athletes' profiles will increase the possibility to detect micro-doses of T. In addition, serum DHT and T may be a useful addition to the future endocrine module of the ABP.