Building a NICU quality & safety infrastructure.

The American Academy of Pediatrics (AAP) Standards for Levels of Neonatal Care, published in 2023, highlights key components of a Neonatal Patient Safety and Quality Improvement Program (NPSQIP). A comprehensive Neonatal Intensive Care Unit (NICU) quality and safety infrastructure (QSI) is based on four foundational domains: quality improvement, quality assurance, safety culture, and clinical guidelines. This paper serves as an operational guide for NICU clinical leaders and quality champions to navigate these domains and develop their local QSI to include the AAP NPSQIP standards.

A high-resolution large-area detector for quality assurance in radiotherapy.

Hadron therapy is an advanced radiation modality for treating cancer, which currently uses protons and carbon ions. Hadrons allow for a highly conformal dose distribution to the tumour, minimising the detrimental side-effects due to radiation received by healthy tissues. Treatment with hadrons requires sub-millimetre spatial resolution and high dosimetric accuracy. This paper discusses the design, fabrication and performance tests of a detector based on Gas Electron Multipliers (GEM) coupled to a matrix of thin-film transistors (TFT), with an active area of 60 × 80 mm2 and 200 ppi resolution. The experimental results show that this novel detector is able to detect low-energy (40 kVp X-rays), high-energy (6 MeV) photons used in conventional radiation therapy and protons and carbon ions of clinical energies used in hadron therapy. The GEM-TFT is a compact, fully scalable, radiation-hard detector that measures secondary electrons produced by the GEMs with sub-millimetre spatial resolution and a linear response for proton currents from 18 pA to 0.7 nA. Correcting known detector defects may aid in future studies on dose uniformity, LET dependence, and different gas mixture evaluation, improving the accuracy of QA in radiotherapy.

Results of a Pilot External Quality Assessment Scheme for Genetic Testing of Newborns with Spinal Muscular Atrophy.

BACKGROUND: This study aims to evaluate the ability of laboratories to perform spinal muscular atrophy (SMA) genetic testing in newborns based on dried blood spot (DBS) samples, and to provide reference data and advance preparation for establishing the pilot external quality assessment (EQA) scheme for SMA genetic testing of newborns in China. METHODS: The pilot EQA scheme contents and evaluation principles of this project were designed by National Center for Clinical Laboratories (NCCL), National Health Commission. Two surveys were carried out in 2022, and 5 batches of blood spots were submitted to the participating laboratory each time. All participating laboratories conducted testing upon receiving samples, and test results were submitted to NCCL within the specified date. RESULTS: The return rates were 75.0% (21/28) and 95.2% (20/21) in the first and second surveys, respectively. The total return rate of the two examinations was 83.7% (41/49). Nineteen laboratories (19/21, 90.5%) had a full score passing on the first survey, while in the second survey twenty laboratories (20/20, 100%) scored full. CONCLUSIONS: This pilot EQA survey provides a preliminary understanding of the capability of SMA genetic testing for newborns across laboratories in China. A few laboratories had technical or operational problems in testing. It is, therefore, of importance to strengthen laboratory management and to improve testing capacity for the establishment of a national EQA scheme for newborn SMA genetic testing.

Assessing the sensitivity and suitability of a range of detectors for SIMT PSQA.

PURPOSE: Single-isocenter multi-target intracranial stereotactic radiotherapy (SIMT) is an effective treatment for brain metastases with complex treatment plans and delivery optimization necessitating rigorous quality assurance. This work aims to assess five methods for quality assurance of SIMT treatment plans in terms of their suitability and sensitivity to delivery errors. METHODS: Sun Nuclear ArcCHECK and SRS MapCHECK, GafChromic EBT Radiochromic Film, machine log files, and Varian Portal Dosimetry were all used to measure 15 variations of a single SIMT plan. Variations of the original plan were created with Python. They comprised various degrees of systematic MLC offsets per leaf up to 2 mm, random per-leaf variations with differing minimum and maximum magnitudes, simulated collimator, and dose miscalibrations (MU scaling). The erroneous plans were re-imported into Eclipse and plan-quality degradation was assessed by comparing each plan variation to the original clinical plan in terms of the percentage of clinical goals passing relative to the original plan. Each erroneous plan could be then ranked by the plan-quality degradation percentage following recalculation in the TPS so that the effects of each variation could be correlated with γ pass rates and detector suitability. RESULTS & CONCLUSIONS: It was found that 2%/1 mm is a good starting point for the ArcCHECK, Portal Dosimetry, and the SRS MapCHECK methods, respectively, and provides clinically relevant error detection sensitivity. Looser dose criteria of 5%/1 mm or 5%/1.5 mm are suitable for film dosimetry and log-file-based methods. The statistical methods explored can be expanded to other areas of patient-specific QA and detector assessment.

Image quality characterization of an ultra-high-speed kilovoltage cone-beam computed tomography imaging system on an O-ring linear accelerator.

PURPOSE: The quality of on-board imaging systems, including cone-beam computed tomography (CBCT), plays a vital role in image-guided radiation therapy (IGRT) and adaptive radiotherapy. Recently, there has been an upgrade of the CBCT systems fused in the O-ring linear accelerators called HyperSight, featuring a high imaging performance. As the characterization of a new imaging system is essential, we evaluated the image quality of the HyperSight system by comparing it with Halcyon 3.0 CBCT and providing benchmark data for routine imaging quality assurance. METHODS: The HyperSight features ultra-fast scan time, a larger kilovoltage (kV) detector, a more substantial kV tube, and an advanced reconstruction algorithm. Imaging protocols in the two modes of operation, treatment mode with IGRT and the CBCT for planning (CBCTp) mode were evaluated and compared with Halcyon 3.0 CBCT. Image quality metrics, including spatial resolution, contrast resolution, uniformity, noise, computed tomography (CT) number linearity, and calibration error, were assessed using a Catphan and an electron density phantom and analyzed with TotalQA software. RESULTS: HyperSight demonstrated substantial improvements in contrast-to-noise ratio and noise in both IGRT and CBCTp modes compared to Halcyon 3.0 CBCT. CT number calibration error of HyperSight CBCTp mode (1.06%) closely matches that of a full CT scanner (0.72%), making it suitable for adaptive planning. In addition, the advanced hardware of HyperSight, such as ultra-fast scan time (5.9 s) or 2.5 times larger heat unit capacity, enhanced the clinical efficiency in our experience. CONCLUSIONS: HyperSight represented a significant advancement in CBCT imaging. With its image quality, CT number accuracy, and ultra-fast scans, HyperSight has a potential to transform patient care and treatment outcomes. The enhanced scan speed and image quality of HyperSight are expected to significantly improve the quality and efficiency of treatment, particularly benefiting patients.

Clinical physicists' perceptions of weekly chart checks and the potential role for automated image review assessed by structured interviews.

BACKGROUND: This study utilizes interviews of clinical medical physicists to investigate self-reported shortcomings of the current weekly chart check workflow and opportunities for improvement. METHODS: Nineteen medical physicists were recruited for a 30-minute semi-structured interview, with a particular focus placed on image review and the use of automated tools for image review in weekly checks. Survey-type questions were used to gather quantitative information about chart check practices and importance placed on reducing chart check workloads versus increasing chart check effectiveness. Open-ended questions were used to probe respondents about their current weekly chart check workflow, opinions of the value of weekly chart checks and perceived shortcomings, and barriers and facilitators to the implementation of automated chart check tools. Thematic analysis was used to develop common themes across the interviews. RESULTS: Physicists ranked highly the value of reducing the time spent on weekly chart checks (average 6.3 on a scale from 1 to 10), but placed more value on increasing the effectiveness of checks with an average of 9.2 on a 1-10 scale. Four major themes were identified: (1) weekly chart checks need to adapt to an electronic record-and-verify chart environment, (2) physicists could add value to patient care by analyzing images without duplicating the work done by physicians, (3) greater support for trending analysis is needed in weekly checks, and (4) automation has the potential to increase the value of physics checks. CONCLUSION: This study identified several key shortcomings of the current weekly chart check process from the perspective of the clinical medical physicist. Our results show strong support for automating components of the weekly check workflow in order to allow for more effective checks that emphasize follow-up, trending, failure modes and effects analysis, and allow time to be spent on other higher value tasks that improve patient safety.

Quality assurance of add-on testing in plasma samples: stability limit for 29 biochemical analytes.

Introduction: Clinical laboratories should guarantee sample stability in specific storage conditions for further analysis. The aim of this study is to evaluate the stability of plasma samples under refrigeration for 29 common biochemical analytes usually ordered within an emergency context, in order to determine the maximum allowable period for conducting add-on testing. Materials and methods: A total of 20 patient samples were collected in lithium heparin tubes without gel separator. All analyses were performed using Alinity systems (Abbott Laboratories, Abbott Park, USA) and samples were stored at 2-8 °C. Measurements were conducted in primary plasma tubes at specific time points up to 48 hours, with an additional stability study in plasma aliquots extending the time storage up to 96 hours. The stability limit was estimated considering the total limit of change criteria. Results: Of the 29 studied parameters, 24 demonstrated stabilities within a 48-hour storage period in primary plasma tubes. However, five analytes: aspartate aminotransferase, glucose, lactate dehydrogenase, inorganic phosphate and potassium evidenced instability at different time points (7.9 hours, 2.7 hours, 2.9 hours, 6.2 hours and 4.7 hours, respectively). The stability study in plasma aliquots showed that all parameters remained stable for 96 hours, except lactate dehydrogenase, with a stability limit of 63 hours. Conclusions: A reduced stability of primary plasma samples was observed for five common biochemical analytes ordered in an emergency context. To ensure the quality of add-on testing for these samples, plasma aliquots provide stability for a longer period.

Result of a Pilot External Quality Assessment Scheme for Clinical Diagnosis of Inherited Metabolic Disorders in China.

BACKGROUND: We aimed to evaluate the diagnostic capabilities of Chinese laboratories for inherited metabolic disorders (IMDs) using gas chromatography-mass spectrometry (GC-MS) on urine samples. Meanwhile, based on the result of the pilot external quality assessment (EQA) scheme, we hope to establish a standardized and reliable procedure for future EQA practice. METHODS: We recruited laboratories that participated in the EQA of quantitative analysis of urinary organic acids with GC-MS before joining the surveys. In each survey, a set of five real urine samples was distributed to each participant. The participants should analyze the sample by GC-MS and report the "analytical result", "the most likely diagnosis", and "recommendation for further tests" to the NCCL before the deadline. RESULTS: A total of 21 laboratories participated in the scheme. The pass rates were 94.4% in 2020 and 89.5% in 2021. For all eight IMDs tested, the analytical proficiency rates ranged from 84.7% - 100%, and the interpretational performance rate ranged from 88.2% - 97.0%. The performance on hyperphenylalaninemia (HPA), 3-methylcrotonyl-CoA carboxylase deficiency (MCCD), and ethylmalonic encephalopathy (EE) samples were not satisfactory. CONCLUSIONS: In general, the participants of this pilot EQA scheme are equipped with the basic capability for qualitative organic acid analysis and interpretation of the results. Limited by the small size of laboratories and samples involved, this activity could not fully reflect the state of clinical practice of Chinese laboratories. NCCL will improve the EQA scheme and implement more EQA activities in the future.

Dosimetric Systems in Pre-Treatment QA for Stereotactic Treatments: Correlation Agreements and Target Volume Dependency.

AIM: This study comprehensively investigated pre-treatment quality assurance (QA) for 100 cancer patients undergoing stereotactic treatments (SRS/SRT) using various detectors. METHODS: The study conducted QA for SRS/SRT treatments planned with a 6MV SRS beam at a dose rate of 1,000 MU/min, utilizing Eclipse v13.6 Treatment Planning System (TPS). Point dose measurements employed 0.01cm3 and 0.13cm3 cylindrical ionization chambers, while planar dose verification utilized Gafchromic EBT-XD Film and Portal Imager (aS1000). Plans were categorized by target volume, and a thorough analysis compared point dose agreements, planar dose gamma pass rates, and their correlations with chamber volume mean dose, detector type, and point dose agreement. Additionally, the consistency between different ionization chambers was assessed. RESULTS: Point dose agreement generally improved with increasing target volume, except for volumes over 10cm3 with 0.01cm3 chambers, showing a contrary trend. Significant differences (p<0.05) were observed between TPS and measured doses for both chambers. Gamma pass rate improved with increasing target volume in EBT XD and aS1000 analyses, except for the >10cm3 group in EBT XD. EBT XD demonstrated better agreement with TPS for target volumes up to 10cm3 compared to aS1000, with a statistically significant difference (p<0.05) between the detectors. Strong correlations were found between chamber point dose and chamber volume mean dose agreement, as well as between the two gamma criteria analyses of the same detector type in the planar dose correlation analysis. However, weak correlations were discovered for other analyses. CONCLUSION: This study found weak correlation between different detector types in pre-treatment QA for point dose and planar dose evaluation. However, within a specific detector type, strong correlation was observed for different point dose evaluation methods and gamma criteria. This highlights the importance of cautious interpretation of QA results, particularly for SRS QA, due to the lack of correlation between detector types.

Primer Part 1 - Preparing a laboratory quality improvement project.

Quality in laboratory medicine encompasses multiple components related to total quality management, including quality control (QC), quality assurance (QA), quality indicators, and quality improvement (QI). Together, they contribute to minimizing errors (pre-analytical, analytical, or post-analytical) in clinical service delivery and improving process appropriateness and efficiency. In contrast to static quality benchmarks (QC, QA, quality indicators), the QI paradigm is a continuous approach to systemic process improvement for optimizing patient safety, timeliness, effectiveness, and efficiency. Healthcare institutions have placed emphasis on applying the QI framework to identify and improve healthcare delivery. Despite QI's increasing importance, there is a lack of guidance on preparing, executing, and sustaining QI initiatives in the field of laboratory medicine. This has presented a significant barrier for clinical laboratorians to participate in and lead QI initiatives. This three-part primer series will bridge this knowledge gap by providing a guide for clinical laboratories to implement a QI project that issuccessful and sustainable. In the first article, we introduce the steps needed to prepare a QI project with focus on relevant methodology and tools related to problem identification, stakeholder engagement, root cause analysis (e.g., fishbone diagrams, Pareto charts and process mapping), and SMART aim establishment. Throughout, we describe a clinical vignette of a real QI project completed at our institution focused on serum protein electrophoresis (SPEP) utilization. This primer series is the first of its kind in laboratory medicine and will serve as a useful resource for future engagement of clinical laboratory leaders in QI initiatives.

Lessons learned from an external quality assurance program in applying CLSI interpretive criteria for reporting piperacillin/tazobactam susceptibility.

We evaluated the performance of automated susceptibility testing for piperacillin/tazobactam (PTZ) MICs against the reference microbroth dilution method. The Minimum Inhibitory Concentration of PTZ against a clinical isolate of Klebsiella pneumoniae was determined by reference broth micro-dilution method in 10 replicates which yielded a modal MIC of 16 mg/L (susceptible dose-dependent). Out of 434 laboratories who obtained MIC of 16 mg/L correctly, only 301 interpreted the result as susceptible dose dependent as per 2022 revised CLSI criteria. Educating the clinical laboratories in validating AST methods as per latest CLSI guidelines is of utmost important.

A comprehensive quality assurance protocol for electromagnetic tracking in brachytherapy.

BACKGROUND: Electromagnetic tracking (EMT) systems have proven to be a valuable source of information regarding the location and geometry of applicators in patients undergoing brachytherapy (BT). As an important element of an enhanced and individualized pre-treatment verification, EMT can play a pivotal role in detecting treatment errors and uncertainties to increase patient safety. PURPOSE: The purpose of this study is two-fold: to design, develop and test a dedicated measurement protocol for the use of EMT-enabled afterloaders in BT and to collect and compare the data acquired from three different radiation oncology centers in different clinical environments. METHODS: A novel quality assurance (QA) phantom composed of a scaffold with supports to fix the field generator, different BT applicators, and reference sensors (sensor verification tools) was used to assess the precision (jitter error) and accuracy (relative distance errors and target registration error) of the EMT sensor integrated into an afterloader prototype. Measurements were repeated in different environments where EMT measurements are likely to be performed, namely an electromagnetically clean laboratory, a BT suite, an operating room, and, if available, a CT suite and an MRI suite dedicated to BT. RESULTS: The mean positional jitter was consistently under 0.1 mm across all measurement points, with a slight trend of increased jitter at greater distances from the field generator. The mean variability of sensor positioning in the tested tandem and ring gynecological applicator was also below 0.1 mm. The tracking accuracy close to the center of the measurement volume was higher than at its edges. The relative distance error at the center was 0.2-0.3 mm with maximum values reaching 1.2-1.8 mm, but up to 5.5 mm for measurement points close to the edges. In general, similar accuracy results were obtained in the clinical environments and in all investigated institutions (median distance error 0.1-0.4 mm, maximum error 1.0-2.0 mm), however, errors were found to be larger in the CT suite (median distance error up to 1.0 mm, maximum error up to 3.6 mm). CONCLUSION: The presented quality assessment protocol for EMT systems in BT has demonstrated that EMT offers a high-accuracy determination of the applicator/implant geometry even in clinical environments. In addition to that, it has provided valuable insights into the performance of EMT-enabled afterloaders across different radiation oncology centers.

External quality assurance in the era of standardization.

Metrology in clinical chemistry aims to ensure the equivalence of measurement results from different in-vitro diagnostic measurement devices (IVD MD) for use in healthcare. The metrological traceability of measurement results to higher-order references is the cornerstone to achieving equivalent results. However, other fundamentals are also needed, including the commutability of reference materials and external quality assessment (EQA) materials for monitoring the equivalence of measurement results at the end-user level. This manuscript summarizes the findings and opinions expressed at the Joint Community for Traceability in Laboratory Medicine (JCTLM) workshop held on December 4-5, 2023. The workshop explored the relationship between EQA/proficiency testing and metrological traceability to higher-order references. EQA monitors the equivalence of measurement results from end-user IVD MDs. The workshop discussed the role and challenges of using EQA to improve and maintain the equivalence of measurement results. It also elucidated current developments in establishing the clinical suitability of laboratory results expressed as analytical performance specifications (APS).

Commissioning and clinical implementation of an independent dose calculation system for scanned proton beams.

PURPOSE: Experimental patient-specific QA (PSQA) is a time and resource-intensive process, with a poor sensitivity in detecting errors. Radiation therapy facilities aim to substitute it by means of independent dose calculation (IDC) in combination with a comprehensive beam delivery QA program. This paper reports on the commissioning of the IDC software tool myQA iON (IBA Dosimetry) for proton therapy and its clinical implementation at the MedAustron Ion Therapy Center. METHODS: The IDC commissioning work included the validation of the beam model, the implementation and validation of clinical CT protocols, and the evaluation of patient treatment data. Dose difference maps, gamma index distributions, and pass rates (GPR) have been reviewed. The performance of the IDC tool has been assessed and clinical workflows, simulation settings, and GPR tolerances have been defined. RESULTS: Beam model validation showed agreement of ranges within ± 0.2 mm, Bragg-Peak widths within ± 0.1 mm, and spot sizes at various air gaps within ± 5% compared to physical measurements. Simulated dose in 2D reference fields deviated by -0.3% ± 0.5%, while 3D dose distributions differed by 1.8% on average to measurements. Validation of the CT calibration resulted in systematic differences of 2.0% between IDC and experimental data for tissue like samples. GPRs of 99.4 ± 0.6% were found for head, head and neck, and pediatric CT protocols on a 2%/2 mm gamma criterion. GPRs for the adult abdomen protocol were at 98.9% on average with 3%/3 mm. Root causes of GPR outliers, for example, implants were identified and evaluated. CONCLUSION: IDC has been successfully commissioned and integrated into the MedAustron clinical workflow for protons in 2021. IDC has been stepwise and safely substituting experimental PSQA since February 2021. The initial reduction of proton experimental PSQA was about 25% and reached up to 90% after 1 year.

Observations from a national sample exchange program for molecular haematology testing.

External quality assessment programs (EQAP) for molecular haematology generally only assess the analytical phase of laboratory testing or provide limited evaluation of post-analytical components. We incorporated comprehensive post-analytical evaluation into an existing national inter-laboratory sample exchange program for molecular haematology due to the increasing complexity of diagnostic molecular testing and interpretation. We report key findings from four years of longitudinal data using this approach. Eighteen participating laboratories enrolled in an annual reciprocal sample exchange program from 2019-2022, which covered conventional and next-generation sequencing (NGS) assays. Participants submitted results on their laboratory information system-generated reports which then underwent central review. Reports were assessed according to consensus values and relevant national and international reporting standards and guidelines. A total of 680 reports were received. Laboratories had high concordance in the analytical phase of testing, with incorrect variant detection observed in a total of six of 680 (0.9%) reports. In contrast, post-analytical concordance was much lower, with at least one discordance observed in 28.9-57.6% of all conventional reports and 33.3-100% NGS reports. The most frequent post-analytical discordances were: (1) not including key technical information on reports (total 41.9% conventional, 47.2% NGS); (2) not using standard gene and variant nomenclature (total 28.2% conventional, 25.6% NGS). NGS reports also demonstrated discrepancies in variant classification (total 20.4%) and interpretation (total 10.2%). The rate of discrepancies generally improved year-on-year. Inter-laboratory concordance for molecular haematology testing is high in the analytical phase, however opportunities exist for improvement in the post-analytical phase. Given that result interpretation is crucial for clinical decision-making and that molecular testing is a complex and evolving field, we suggest that EQAPs should comprehensively evaluate both analytical and post-analytical components of laboratory performance in order to harmonise reporting and to support the accurate interpretation of molecular haematology tests.

Whole blood clotting time: Current practices among Thailand National External Quality Assessment Scheme for blood coagulation member laboratories.

INTRODUCTION: The Thai National Guidelines for Hemostatic Laboratory Testing were established in 2018. The guidelines recommend that the 20-min whole blood clotting time (20WBCT) method be used to diagnose/monitor snake bites. The aim of this study was to survey members of the Thailand National External Quality Assessment Scheme (NEQAS) for Blood Coagulation to investigate the use of 20WBCT testing compared between the 2021 post-guideline and 2007 pre-guideline periods. METHODS: In July 2021, questionnaires were sent from the Faculty of Medicine Siriraj Hospital, Mahidol University to 521 Thailand NEQAS for Blood Coagulation member laboratories to survey their WBCT practices. Current WBCT practices were compared with pre-guideline WBCT practices, and chi-square test (x2) was used to test for differences between groups. RESULTS: Ninety-seven (18.6%) of 521 surveys were returned. Seventy-one laboratories (73.2%) reported knowing about 20WBCT from the Thai national guidelines. The reported average frequency of overall WBCT testing in 2021 was 12.4 times/month. The proportion of laboratories that reported using the 20WBCT test increased from 2.0% in 2007 to 46.4% in 2021 (p < 0.001), and the indications for performing WBCT were virtually unchanged from 2007 to 2021. The proportion of laboratories that reported having problems with WBCT testing decreased from 32.7% in 2007 to 16.5% in 2021. CONCLUSION: Despite our findings that almost three-quarters of respondent laboratories reported knowing about 20WBCT testing from the WBCT guidelines, and that WBCT-specific problems decreased significantly from 2007 to 2021, more work and training is needed to improve WBCT guideline dissemination, understanding, and adherence in Thailand.

Radiotherapy trial quality assurance processes: a systematic review.

Quality assurance remains a neglected component of many trials, particularly for technical interventions, such as surgery and radiotherapy, for which quality of treatment is an important component in defining outcomes. We aimed to evaluate evidence for the processes used in radiotherapy quality assurance of clinical trials. A systematic review was undertaken focusing on use of a pre-trial outlining benchmark case and subsequent on-trial individual case reviews of outlining for recruited patients. These pre-trial and on-trial checks are used to ensure consistency and standardisation of treatment for each patient recruited to the trial by confirming protocol compliance. Non-adherence to the trial protocol has been shown to have a negative effect on trial outcomes. 29 studies published between January, 2000, and December, 2022, were identified that reported on either outlining benchmark case results or outlining individual case review results, or both. The trials identified varied in their use of radiotherapy quality assurance practices and reporting of outcomes was inconsistent. Deviations from trial protocols were frequent, particularly regarding outlining. Studies correlating benchmark case results with on-trial individual case reviews provided mixed results, meaning firm conclusions could not be drawn regarding the influence of the pre-trial benchmark case on subsequent on-trial performance. The optimal radiotherapy quality assurance processes were unclear, and there was little evidence available. Improved reporting of outcomes from radiotherapy quality assurance programmes is needed to develop an evidence base for the optimal approach to radiotherapy quality assurance in trials.

To rule-in, or not to falsely rule-out, that is the question: evaluation of hs-cTnT EQA performance in light of the ESC-2020 guideline.

OBJECTIVES: To accurately evaluate non-ST-elevated acute cardiac syndrome (NSTE-ACS), the quality of high-sensitive cardiac troponin (hs-cTn) assays is of vital importance. The 2020 revision of the NSTE-ACS guideline includes clinical decision-limits (CDL's) to both rule-in and rule-out NSTE-ACS for most commercially available platforms, providing both 0/1 h and 0/2 h delta limits. Our study evaluated whether laboratories are able to meet the analytical performance specifications for imprecision (APS) for hs-cTnT. METHODS: Results from external quality assurance (EQA) in commutable samples were used to evaluate the current and historic performance of analyzers. The performance of analyzers that either passed or failed to comply with 0/1 h-APS were used on a real-world dataset of first hs-cTnT-values to simulate 10.000 samples of t=0, t=1 and t=2 h values with multiple delta's for all relevant CDL's. We compared the simulated values to the input values to obtain the percentage of aberrant results simulated. RESULTS: The majority of analyzers complies with APS for rule-in in 2022 (0/1 h: 90.4 % and 0/2 h: 100 %), compliance for the 0/1 h rule-out is still far from optimal (0/1 h: 30.7 %, 0/2 h: 75.4 %), with improving compliance over the past years (rule-in p=<0.0001, rule-out p=0.011, χ2). Whilst 0/1 h-APS-passing analyzers have a minute risk to falsely rule-out patients whom should be ruled-in (0.0001 %), failing performance increases this risk to 2.1 % upon using 0/1 h CDL's. Here, adopting 0/2 h CDL's is favorable (0.01 %). CONCLUSIONS: Laboratories that fail to meet hs-cTnT 0/1 h-APS should improve their performance to the required and achievable level. Until performance is reached clinics should adopt the 0/2 h CDL's.