A Review of Sclerosing Foam Stability in the Treatment of Varicose Veins.

BACKGROUND: Varicose veins are common clinical entities. Foam sclerotherapy is a minimally invasive and simple procedure; however, the side effects, efficacy, and stability of sclerosing foam are not ideal. OBJECTIVE: To summarize the current studies on sclerosing foam stability and promote foam sclerotherapy development. MATERIALS AND METHODS: We reviewed the literature before June 2018 and included only representatives studies on sclerosing foam stability. We summarized the foam half-life time (FHT) of polidocanol (POL) under 17 preparation conditions and the FHT of sodium tetradecyl sulfate under 21 preparation conditions. The preparation conditions included various combinations of temperature, liquid-gas ratio, preparation method, etc. RESULTS: The FHT of POL varied between 40 and 4,000 seconds under different conditions. The FHT of sodium tetradecyl sulfate varied from 25.7 to 390 seconds. The higher the drug concentration, the lower the temperature required to increase foam stability. The addition of surfactant greatly increased foam stability. For different gas compositions, the FHT sequence was as follows: CO2 < CO2 + O2 < O2 < air. CONCLUSION: Foam stability can be improved by changing the preparation conditions; therefore, the role of surfactants and predictive methods for FHT are worth investigating further.

Streamlined production of genetically modified T cells with activation, transduction and expansion in closed-system G-Rex bioreactors.

BACKGROUND: Gas Permeable Rapid Expansion (G-Rex) bioreactors have been shown to efficiently expand immune cells intended for therapeutic use, but do not address the complexity of the viral transduction step required for many engineered T-cell products. Here we demonstrate a novel method for transduction of activated T cells with Vectofusin-1 reagent. Transduction is accomplished in suspension, in G-Rex bioreactors. The simplified transduction step is integrated into a streamlined process that uses a single bioreactor with limited operator intervention. METHODS: Peripheral blood mononuclear cells (PBMCs) from healthy donors were thawed, washed and activated with soluble anti-CD3 and anti-CD28 antibodies either in cell culture bags or in G-Rex bioreactors. Cells were cultured in TexMACS GMP medium with interleukin (IL)-7 and IL-15 and transduced with RetroNectin in bags or Vectorfusin-1 in the G-Rex. Total viable cell number, fold expansion, viability, transduction efficiency, phenotype and function were compared between the two processes. RESULTS: The simplified process uses a single vessel from activation through harvest and achieves 56% transduction with 29-fold expansion in 11 days. The cells generated in the simplified process do not differ from cells produced in the conventional bag-based process functionally or phenotypically. DISCUSSION: This study demonstrates that T cells can be transduced in suspension. Further, the conventional method of generating engineered T cells in bags for clinical use can be streamlined to a much simpler, less-expensive process without compromising the quality or function of the cell product.

Kinetics and removal formula of methyl mercaptan by ethanol absorption without neglecting solute accumulation.

The wet scrubbing process is commonly adopted for organic odor treatment. In this study, methyl mercaptan (CH3SH) was selected as a representative hydrophobic organic odorant which was treated using an ethanol solution in a scrubbing tower. Results showed that the ethanol solution can retain the ideal CH3SH removal effect for 2.0 h. The following experimental conditions were set: intake load of 4,700 m3 m-2 h-1, spraying load of 5,100 L m-2 h-1, and volume ratio of ethanol/water at 1:5. The solute accumulation of CH3SH in the scrubbing liquid exceeded 3.01 × 10-4 kmol CH3SH/kmol ethanol when the scrubbing tower operated for more than 2.0 h. The mathematical formula which neglected solute accumulation in the ethanol solution exhibited poor adaptability to the removal effect of CH3SH by ethanol absorption. The CH3SH removal effect of solute accumulation in the ethanol solution was explored in long-term operation. Meanwhile, the CH3SH removal rate formula which considered solute accumulation in the ethanol solution could be calculated as η = a'-b'X2/Y1. The kinetic parameters of the formula fitting results were phase equilibrium constant m 0.0076, and overall mass transfer coefficient KY 4.98 kmol m-2 h-1 in the scrubbing tower. These findings can serve as a reference for engineering design and operation for the removal of CH3SH by ethanol absorption.

A novel enhanced diffusion sampler for collecting gaseous pollutants without air agitation.

A novel enhanced diffusion sampler for collecting gaseous phase polycyclic aromatic hydrocarbons (PAHs) without air agitation is proposed. The diffusion of target compounds into a sampling chamber is facilitated by continuously purging through a closed-loop flow to create a large concentration difference between the ambient air and the air in the sampling chamber. A glass-fiber filter-based prototype was developed. It was demonstrated that the device could collect gaseous PAHs at a much higher rate (1.6 ± 1.4 L/min) than regular passive samplers, while the ambient air is not agitated. The prototype was also tested in both the laboratory and field for characterizing the concentration gradients over a short distance from the soil surface. The sampler has potential to be applied in other similar situations to characterize the concentration profiles of other chemicals.

Airlift bioreactor system for simultaneous removal of hydrogen sulfide and ammonia from synthetic and actual waste gases.

The effectiveness of an airlift reactor system in simultaneously removing hydrogen sulfide (H2S) and ammonia (NH3) from synthetic and actual waste gases was investigated. The effects of various parameters, including the ratio of inoculum dilution, the gas concentration, the gas retention time, catalyst addition, the bubble size, and light intensity, on H2S and NH3 removal were investigated. The results revealed that optimal gas removal could be achieved by employing an activated inoculum, using a small bubble stone, applying reinforced fluorescent light, adding Fe2O3 catalysts, and applying a gas retention time of 20 s. The shock loading did not substantially affect the removal efficiency of the airlift bioreactor. Moreover, more than 98.5% of H2S and 99.6% of NH3 were removed in treating actual waste gases. Fifteen bands or species were observed in a profile from denaturing gradient gel electrophoresis during waste gas treatment. Phylogenetic analysis revealed the phylum Proteobacteria to be predominant. Six bacterial strains were consistently present during the entire operating period; however, only Rhodobacter capsulatus, Rhodopseudomonas palustris, and Arthrobacter oxydans were relatively abundant in the system. The photosynthetic bacteria R. capsulatus and R. palustris were responsible for H2S oxidation, especially when the reinforced fluorescent light was used. The heterotrophic nitrifier A. oxydans was responsible for NH3 oxidation. To our knowledge, this is the first report on simultaneous H2S and NH3 removal using an airlift bioreactor system. It clearly demonstrates the effectiveness of the system in treating actual waste gases containing H2S and NH3.

Non-isothermal pyrolysis of de-oiled microalgal biomass: Kinetics and evolved gas analysis.

Non-isothermal (ß=5, 10, 20, 35°C/min) pyrolysis of de-oiled microalgal biomass (DMB) of Chlorella variabilis was investigated by TGA-MS (30-900°C, Argon atmosphere) to understand thermal decomposition and evolved gas analysis (EGA). The results showed that three-stage thermal decomposition and three volatilization zone (100-400°C, 400-550°C and 600-750°C) of organic matters during pyrolysis. The highest rate of weight-loss is 8.91%/min at 302°C for 35°C/min heating-rate. Kinetics of pyrolysis were investigated by iso-conversional (KAS, FWO) and model-fitting (Coats-Redfern) method. For Zone-1and3, similar activation energy (Ea) is found in between KAS (α=0.4), FWO (α=0.4) and Avrami-Erofe'ev (n=4) model. Using the best-fitted kinetic model Avrami-Erofe'ev (n=4), Ea values (R2=>0.96) are 171.12 (Zone-1), 404.65 (Zone-2) and 691.42kJ/mol (Zone-3). EGA indicate the abundance of most gases observed consequently between 200-300°C and 400-500°C. The pyrolysis of DMB involved multi-step reaction mechanisms for solid-state reactions having different Ea values.

In vivo regional ventilation mapping using fluorinated gas MRI with an x-centric FGRE method.

PURPOSE: Inert fluorinated gas lung MRI is a new and promising alternative to hyperpolarized gas lung MRI; it is less expensive and does not require expensive isotopes/polarizers. The thermally polarized nature of signal obtained from fluorinated gases makes it relatively easy to use for dynamic lung imaging and for obtaining lung ventilation maps. In this study, we propose that the sensitivity and resolution of fluorine-19 (19F) in vivo images can be improved using the x-centric pulse sequence, thereby achieving a short echo time/pulse repetition time. This study is a transitional step for converting to more sustainable gases for lung imaging. METHODS: A 19F-resolution phantom was used to validate the efficiency of performing the x-centric pulse sequence on a clinical scanner. Ventilation maps were obtained in the lungs of five normal rats with a washout approach (adapted from Xe-enhanced computed tomography [Xe-CT] regional ventilation mapping), using mixtures of either sulfur hexafluoride/oxygen or perfluoropropane/oxygen and a two-breath x-centric method. RESULTS: Fractional ventilation (r) values obtained in this study (0.35-0.46 interval) were in good agreement with previously published values for 3He/129Xe. Calculated r gradients agreed well with published gradients obtained in rats with Xe-CT measurements. CONCLUSIONS: These results suggest that fluorinated gases can be reliably used in vivo in dynamic lung studies as an alternative to 3He/129Xe.

Physical model for absorption of intraocular gas.

PURPOSE: To present a physical model for intraocular absorption of an inert gas used as a tamponade. METHODS: The absorption kinetics of gas in contact with the retinal surface is examined, including the changing geometry of the shrinking gas bubble inside the eye. RESULTS: An analytic solution is derived that predicts how the bubble dimensions change with time, yielding a formula for the lifetime of the gas bubble. Comparison to an experimental measurement shows that the analytic solution accurately replicates the time evolution of the bubble geometry. The result is also compared to an alternative exponential model, which does not predict a finite bubble lifetime. CONCLUSIONS: Further experiments are needed to discriminate between the surface absorption and exponential models.

Application of Glycyrrhiza glabra root as a novel adsorbent in the removal of toluene vapors: equilibrium, kinetic, and thermodynamic study.

The aim of this paper is to investigate the removal of toluene from gaseous solution through Glycyrrhiza glabra root (GGR) as a waste material. The batch adsorption experiments were conducted at various conditions including contact time, adsorbate concentration, humidity, and temperature. The adsorption capacity was increased by raising the sorbent humidity up to 50 percent. The adsorption of toluene was also increased over contact time by 12 h when the sorbent was saturated. The pseudo-second-order kinetic model and Freundlich model fitted the adsorption data better than other kinetic and isotherm models, respectively. The Dubinin-Radushkevich (D-R) isotherm also showed that the sorption by GGR was physical in nature. The results of the thermodynamic analysis illustrated that the adsorption process is exothermic. GGR as a novel adsorbent has not previously been used for the adsorption of pollutants.

Predicting the absorption of chemical vapours.

The focus of this review is on the systemic absorption of vapours via skin, including experimental data as well as regression and pharmacokinetic models. Dermal contribution ratios (DCR), i.e. amount absorbed through skin relative to total intake (skin and inhalation) at specified conditions, could be identified or calculated from published data for 33 chemical vapours. The ratios vary from ~0.0002 (vinyl chloride) to ~0.8 (2-butoxyethanol), with hydrophilic chemicals having a higher ratio than lipophilic ones. Multiple regression analysis of these data suggests that the DCR is largely explained by the octanol:water partition coefficient, vapour pressure and molecular weight (R(2)=0.69). Several physiologically-based pharmacokinetic models were identified; however, all describe the absorption of single substances. Regarding predictive models, only two models were found. In conclusion, dermal uptake of chemical vapours needs more attention, as such exposures are common, data are scarce and few predictive models exist.

Composite films of arabinoxylan and fibrous sepiolite: morphological, mechanical, and barrier properties.

Hemicelluloses represent a largely unutilized resource for future bioderived films in packaging and other applications. However, improvement of film properties is needed in order to transfer this potential into reality. In this context, sepiolite, a fibrous clay, was investigated as an additive to enhance the properties of rye flour arabinoxylan. Composite films cast from arabinoxylan solutions and sepiolite suspensions in water were transparent or semitransparent at additive loadings in the 2.5-10 wt % range. Scanning electron microscopy showed that the sepiolite was well dispersed in the arabinoxylan films and sepiolite fiber aggregation was not found. FT-IR spectroscopy provided some evidence for hydrogen bonding between sepiolite and arabinoxylan. Consistent with these findings, mechanical testing showed increases in film stiffness and strength with sepiolite addition and the effect of poly(ethylene glycol) methyl ether (mPEG) plasticizer addition. Incorporation of sepiolite did not significantly influence the thermal degradation or the gas barrier properties of arabinoxylan films, which is likely a consequence of sepiolite fiber morphology. In summary, sepiolite was shown to have potential as an additive to obtain stronger hemicellulose films although other approaches, possibly in combination with the use of sepiolite, would be needed if enhanced film barrier properties are required for specific applications.

Air-gas exchange reevaluated: clinically important results of a computer simulation.

PURPOSE: The primary aim of this study was to evaluate the efficiency of air-gas exchange techniques and the factors that influence the final concentration of an intraocular gas tamponade. Parameters were varied to find the optimum method of performing an air-gas exchange in ideal circumstances. METHODS: A computer model of the eye was designed using 3D software with fluid flow analysis capabilities. Factors such as angular distance between ports, gas infusion gauge, exhaust vent gauge and depth were varied in the model. Flow rate and axial length were also modulated to simulate faster injections and more myopic eyes, respectively. The flush volume of gas required to achieve a 97% intraocular gas fraction concentration were compared. RESULTS: Modulating individual factors did not reveal any clinically significant difference in the angular distance between ports, exhaust vent size, and depth or rate of gas injection. In combination, however, there was a 28% increase in air-gas exchange efficiency comparing the most efficient with the least efficient studied parameters in this model. The gas flush volume required to achieve a 97% gas fill also increased proportionately at a ratio of 5.5 to 6.2 times the volume of the eye. CONCLUSIONS: A 35-mL flush is adequate for eyes up to 25 mm in axial length; however, eyes longer than this would require a much greater flush volume, and surgeons should consider using two separate 50-mL gas syringes to ensure optimal gas concentration for eyes greater than 25 mm in axial length.

A validated hybrid computational fluid dynamics-physiologically based pharmacokinetic model for respiratory tract vapor absorption in the human and rat and its application to inhalation dosimetry of diacetyl.

Diacetyl vapor is associated with bronchiolar injury in man but primarily large airway injury in the rat. The goal of this study was to develop a physiologically based pharmacokinetic model for inspired vapor dosimetry and to apply the model to diacetyl. The respiratory tract was modeled as a series of airways: nose, trachea, main bronchi, large bronchi, small bronchi, bronchioles, and alveoli with tissue dimensions obtained from the literature. Airborne vapor was allowed to absorb (or desorb) from tissues based on mass transfer coefficients. Transfer of vapor within tissues was based on molecular diffusivity with direct reaction with tissue substrates and/or metabolism being allowed in each tissue compartment. In vitro studies were performed to provide measures of diacetyl metabolism kinetics and direct reaction rates allowing for the development of a model with no unassigned variables. Respiratory tract uptake of halothane, acetone, ethanol and diacetyl was measured in male F344 rat to obtain data for model validation. The human model was validated against published values for inspired vapor uptake. For both the human and rat models, a close concordance of model estimates with experimental measurements was observed, validating the model. The model estimates that limited amounts of inspired diacetyl penetrate to the bronchioles of the rat (<2%), whereas in the lightly exercising human, 24% penetration to the bronchioles is estimated. Bronchiolar tissue concentrations of diacetyl in the human are estimated to exceed those in the rat by 40-fold. These inhalation dosimetric differences may contribute to the human-rat differences in diacetyl-induced airway injury.

Uptake, tissue distribution, and excretion of 14C-sulfur mustard vapor following inhalation in F344 rats and cutaneous exposure in hairless guinea pigs.

Sulfur mustard (SM), a vessicating agent, has been used in chemical warfare since 1918. The purpose of this study was to quantitate SM vapor deposition, tissue distribution, and excretion following intratracheal inhalation in rats and cutaneous exposure in guinea pigs. 14C-SM vapors for inhalation studies were generated by metering liquid 14C-SM into a heated J tube. Vapors were transported via carrier air supplemented with oxygen and isoflurane to an exposure plenum. Anesthetized rats with transorally placed tracheal catheters were connected to the plenum port via the catheter hub for exposure (approximately 250 mg 14C-SM vapor/m(3); 10 min). For dermal exposure, 3 Teflon cups (6.6 cm(2) exposure area per cup) were applied to the backs of each animal and vapors (525 mg 14C-SM/m(3); 12 min) were generated by applying 6 µl 14C-SM to filter paper within each cup. Animals were euthanized at selected times up to 7 d postexposure. SM equivalents deposited in rats and guinea pigs were 18.1 ± 3 µg and 29.8 ± 5.31 µg, respectively. Inhaled SM equivalents rapidly distributed throughout the body within 2 h postexposure, with the majority (>70%) of material at that time located in carcass and pelt. In guinea pigs, >90% of deposited SM equivalents remained in skin, with minor distribution to blood and kidneys. Urine was the primary route of excretion for both species. Results indicate inhaled SM is rapidly absorbed from the lung and distributed throughout the body while there is limited systemic distribution following cutaneous exposure.

A tripartite synapse model in Drosophila.

Tripartite (three-part) synapses are defined by physical and functional interactions of glia with pre- and post-synaptic elements. Although tripartite synapses are thought to be of widespread importance in neurological health and disease, we are only beginning to develop an understanding of glial contributions to synaptic function. In contrast to studies of neuronal mechanisms, a significant limitation has been the lack of an invertebrate genetic model system in which conserved mechanisms of tripartite synapse function may be examined through large-scale application of forward genetics and genome-wide genetic tools. Here we report a Drosophila tripartite synapse model which exhibits morphological and functional properties similar to those of mammalian synapses, including glial regulation of extracellular glutamate, synaptically-induced glial calcium transients and glial coupling of synapses with tracheal structures mediating gas exchange. In combination with classical and cell-type specific genetic approaches in Drosophila, this model is expected to provide new insights into the molecular and cellular mechanisms of tripartite synapse function.

Peripheral refraction in myopic children wearing orthokeratology and gas-permeable lenses.

PURPOSE: To investigate changes in peripheral refraction after orthokeratology (OK) and rigid gas-permeable (GP) lens wear in progressing myopic children and to compare these peripheral defocus changes with reported changes in adults wearing OK. METHODS: Sixteen myopic children subjects were fitted with an OK lens in one eye for overnight wear and a GP lens in the other eye for daily wear. Central and peripheral refraction were measured at baseline and then after 3 mo of lens wear. RESULTS: At baseline, myopic children showed relative peripheral hyperopia compared with central refraction at and beyond 20° in the temporal visual field (VF) and 30° in the nasal VF. Three months of OK lens wear produced hyperopic shifts in refraction between 30° in the temporal VF and 20° in the nasal VF. Peripheral refraction was similar to center at all positions in the temporal VF while remaining significantly myopic at all locations in the nasal VF. No change in either central or peripheral refraction was found after 3 mo in the eye assigned for GP lens wear. CONCLUSIONS: OK significantly reduced myopia in the central 20° VF in myopic children, converting relative peripheral hyperopia measured at baseline to relative peripheral myopia. These changes in children are similar to changes reported in myopic adults wearing OK lenses. No change in either central or peripheral refraction was found after 3 mo of daily GP lens wear. OK lenses can be used to induce myopic defocus in the periphery in myopic children and may thus provide a potential mechanism for myopia control.

Corneal changes after suspending contact lens wear in early pellucid marginal corneal degeneration and moderate keratoconus.

OBJECTIVES: This case study reports on how refraction, visual acuity, and ocular higher-order aberrations changed after rigid gas-permeable (RGP) lens wear was suspended by a patient with early pellucid marginal corneal degeneration (PMD) and by a patient with moderate keratoconus. Alterations in central corneal power and axes, central corneal thickness, and corneal topography were also explored. METHODS: Ocular aberrations and Scheimpflug photography were measured at 2 visits, 7 days apart, after the patients had removed their contact lenses. Subjective refraction and logarithm of the minimum angle of resolution visual acuities were also recorded at both visits. RESULTS: In contrast to the keratoconic patient, the patient with early PMD showed changes in subjective refraction (approximately -1.75 diopter cylinder of astigmatism), front surface central powers (∼1.3 diopter [D] horizontally and 2 D vertically), and anterior surface topography (∼1.2 D) between visits. Both patients showed an increase in total higher-order root mean square (HORMS) aberrations after suspending lens wear (∼0.40 µm for the moderately keratoconic patient and 0.22 µm for the early PMD patient). CONCLUSIONS: Changes in the optical and structural parameters of the cornea after suspending lens wear are likely to be dependent on a multitude of factors, such as the lens fitting and the biomechanical properties of the cornea. The findings of this report may be useful to practitioners when refracting or refitting existing RGP lens wearers with ectasia or to those involved in prescribing aberration-controlling contact lenses for conditions such as keratoconus and PMD.

Corneal refractive therapy gas permeable lenses for the correction of hyperopia after one night of lens wear.

PURPOSE: To examine the refractive and keratometric response of corneal refractive therapy (CRT) contact lenses for hyperopia (CRT) after a single night of contact lens wear with the goal of reducing hyperopia by +3.50 D. METHOD: Twenty participants were fitted with a CRT HDS 100 contact lens, in one eye only. The back optic zone radius of the CRT lens was designed to correct 3.50 D of hyperopia. The eyes were randomly selected. The Nikon Auto Refractor was used to measure refractive error. Corneal topography and simulated K readings were measured using the Humphrey Atlas topographer. The lens was subsequently worn overnight, and the lens was assessed the next morning on awakening. RESULTS: Refractive error changed by 1.50±0.71 D (mean ± SD, range 0.50-2.75 D) immediately after lens removal in the experimental eye. Similarly, there was a change in flat K readings of 0.58±0.62 D with a range of -0.25 to +1.87 D. These results were significantly different from the baseline measurements (P<0.0001). CONCLUSIONS: The fitting of CRT HDS for hyperopia has a significant effect on corneal shape and refractive error. There was a moderate yet significant steepening of the cornea.

Development of a CFD boundary condition to model transient vapor absorption in the respiratory airways.

The absorption of moderately and highly soluble vapors into the walls of the conducting airways was previously shown to be a transient process over the timescale of an inhalation cycle. However, a boundary condition to predict the transient wall absorption of vapors in CFD simulations does not exist. The objective of this study was to develop and test a boundary condition that can be used to predict the transient absorption of vapors in CFD simulations of transport in the respiratory airways. To develop the boundary condition, an analytical expression for the concentration of an absorbed vapor in an air-mucus-tissue-blood (AMTB) model of the respiratory wall was developed for transient and variable air-phase concentrations. Based on the analytical expression, a flux boundary condition was developed at the air-mucus interface as a function of the far-field air-phase concentration. The new transient boundary condition was then implemented to predict absorption in a realistic model of the extrathoracic nasal airways through the larynx (nasal-laryngeal geometry). The results of the AMTB wall model verified that absorption was highly time dependent over the timescale of an inhalation cycle (approximately 1-2 s). At 1 s, transient conditions resulted in approximately 2-3 times more uptake in tissue and 20-25 times less uptake in blood than steady state conditions for both acetaldehyde and benzene. Application of this boundary condition to computational fluid dynamics simulations of the nasal-laryngeal geometry showed, as expected, that transient absorption significantly affected total deposition fractions in the mucus, tissue, and blood. Moreover, transient absorption was also shown to significantly affect the local deposition patterns of acetaldehyde and benzene. In conclusion, it is recommended that future analyses of vapors in the conducting airways consider time-dependent wall absorption based on the transient flux boundary condition developed in this study. Alternatively, a steady state absorption condition may be applied in conjunction with correction factors determined from the AMTB wall model.

Real-time breath gas analysis for pharmacokinetics: monitoring exhaled breath by on-line proton-transfer-reaction mass spectrometry after ingestion of eucalyptol-containing capsules.

Eucalyptol (1,8-cineole) is a common active agent in non-prescription pharmaceutical products that is employed to clear the airways during mucus blockages. Following ingestion of a eucalyptol-containing capsule, the capsule dissolves in the gut and transfers eucalyptol into the blood, which is subsequently expelled via the lungs, thus exposing this decongesting and inflammation-abating compound to the airways. The breath gas concentrations of eucalyptol in 11 healthy adult volunteers were monitored at regular intervals after capsule ingestion using on-line proton-transfer-reaction mass spectrometry (PTR-MS). Eucalyptol appeared in exhaled breath gas at varying times following ingestion, with its onset ranging from 1 h and 6 min to 4 h and 48 min (mean ± SD: 2.1 ± 0.5 h). Maximum concentrations also varied greatly, with peak eucalyptol levels between 106 and 1589 ppb(v) (mean ± SD: 489 ± 319 ppb(v)). These variations were not only inter-subject, but also intra-subject, i.e. repeated tests with the same participant yielded different onset times and a broad range of concentration maxima. A considerable contribution to these variations from infrequent sampling and analysis is discussed. This study characterized the temporal transfer of eucalyptol via the blood into the airways by examining exhaled breath and thereby demonstrated the suitability of on-line breath gas analyses, particularly PTR-MS, for certain pharmacokinetic investigations.