Dynamic response of Aspergillus niger to periodical glucose pulse stimuli in chemostat cultures.

In industrial large-scale bioreactors, microorganisms encounter heterogeneous substrate concentration conditions, which can impact growth or product formation. Here we carried out an extended (12 h) experiment of repeated glucose pulsing with a 10-min period to simulate fluctuating glucose concentrations with Aspergillus niger producing glucoamylase, and investigated its dynamic response by rapid sampling and quantitative metabolomics. The 10-min period represents worst-case conditions, as in industrial bioreactors the average cycling duration is usually in the order of 1 min. We found that cell growth and the glucoamylase productivity were not significantly affected, despite striking metabolomic dynamics. Periodical dynamic responses were found across all central carbon metabolism pathways, with different time scales, and the frequently reported ATP paradox was confirmed for this A. niger strain under the dynamic conditions. A thermodynamics analysis revealed that several reactions of the central carbon metabolism remained in equilibrium even under periodical dynamic conditions. The dynamic response profiles of the intracellular metabolites did not change during the pulse exposure, showing no significant adaptation of the strain to the more than 60 perturbation cycles applied. The apparent high tolerance of the glucoamylase producing A. niger strain for extreme variations in the glucose availability presents valuable information for the design of robust industrial microbial hosts.

Engineering cofactor metabolism for improved protein and glucoamylase production in Aspergillus niger.

BACKGROUND: Nicotinamide adenine dinucleotide phosphate (NADPH) is an important cofactor ensuring intracellular redox balance, anabolism and cell growth in all living systems. Our recent multi-omics analyses of glucoamylase (GlaA) biosynthesis in the filamentous fungal cell factory Aspergillus niger indicated that low availability of NADPH might be a limiting factor for GlaA overproduction. RESULTS: We thus employed the Design-Build-Test-Learn cycle for metabolic engineering to identify and prioritize effective cofactor engineering strategies for GlaA overproduction. Based on available metabolomics and 13C metabolic flux analysis data, we individually overexpressed seven predicted genes encoding NADPH generation enzymes under the control of the Tet-on gene switch in two A. niger recipient strains, one carrying a single and one carrying seven glaA gene copies, respectively, to test their individual effects on GlaA and total protein overproduction. Both strains were selected to understand if a strong pull towards glaA biosynthesis (seven gene copies) mandates a higher NADPH supply compared to the native condition (one gene copy). Detailed analysis of all 14 strains cultivated in shake flask cultures uncovered that overexpression of the gsdA gene (glucose 6-phosphate dehydrogenase), gndA gene (6-phosphogluconate dehydrogenase) and maeA gene (NADP-dependent malic enzyme) supported GlaA production on a subtle (10%) but significant level in the background strain carrying seven glaA gene copies. We thus performed maltose-limited chemostat cultures combining metabolome analysis for these three isolates to characterize metabolic-level fluctuations caused by cofactor engineering. In these cultures, overexpression of either the gndA or maeA gene increased the intracellular NADPH pool by 45% and 66%, and the yield of GlaA by 65% and 30%, respectively. In contrast, overexpression of the gsdA gene had a negative effect on both total protein and glucoamylase production. CONCLUSIONS: This data suggests for the first time that increased NADPH availability can indeed underpin protein and especially GlaA production in strains where a strong pull towards GlaA biosynthesis exists. This data also indicates that the highest impact on GlaA production can be engineered on a genetic level by increasing the flux through the pentose phosphate pathway (gndA gene) followed by engineering the flux through the reverse TCA cycle (maeA gene). We thus propose that NADPH cofactor engineering is indeed a valid strategy for metabolic engineering of A. niger to improve GlaA production, a strategy which is certainly also applicable to the rational design of other microbial cell factories.

Efficient genome editing in Aspergillus niger with an improved recyclable CRISPR-HDR toolbox and its application in introducing multiple copies of heterologous genes.

Aspergillus niger is an important industrial producer of enzymes due to its high capacity for producing exocellular secretory proteins. The CRISPR/Cas9 system has been developed as a genetic manipulation tool in A. niger. However, only the basic functions of the CRISPR/Cas9 system, such as codon optimization of Cas9 nucleases and promoter screening of guide RNA (gRNA) expression, have been developed in A. niger. The CRISPR/Cas9 system for manipulating large genomic fragments and multiple gene knock-ins still needs to be established. Here, we improved the CRISPR/Cas9 homologous direct repair (CRISPR-HDR) tool box based on donor DNAs (dDNAs) and plasmid harboring AMA1 and the pyrG marker, allowing recycling of pyrG and Cas9 components. Furthermore, we used the CRISPR-HDR tool box to knock out the 0 kb (protospacer only), 2 kb, 10 kb and even 50 kb gene fragments. This CRISPR-HDR tool box could also be used to simultaneously knock in multiple genes at the loci of two highly expressed extracellular secreted proteins, glucoamylase A (glaA) and alpha-amylase (amyA, two copies). In our study, two or three copies of glucose oxidase (goxC) were precisely knocked in at the loci of amyA and glaA, resulting in 4-fold increased enzyme activity (869.86 U/mL). This CRISPR-HDR tool box can be easily manipulated, and the AMA1-based plasmid can be easily removed under selective pressure of 5-fluoroorotic acid and uridine.

Application and Analysis of Rhizopus oryzae Mycelia Extending Characteristic in Solid-state Fermentation for Producing Glucoamylase.

Enhanced application of solid-state fermentation (SSF) in industrial production and the influence of SSF of Rhizopus K1 on glucoamylase productivity were analyzed using the flat band method. A growth model was implemented through SSF of Rhizopus K1 in this experiment, and spectrophotometric method was used to determine glucoamylase activity. Results showed that in bran and potato culture medium with 70% moisture in a loose state, µ of mycelium reached to 0.15 h-1 after 45 h of culture in a thermostatic water bath incubator at 30°C. Under a low-magnification microscope, mycelial cells appeared uniform, bulky with numerous branches, and were not easily ruptured. The generated glucoamylase activity reached to 55 U/g (dry basis). This study has good utilization value for glucoamylase production by Rhizopus in SSF.

Enzymatic Synthesis of a Novel Pterostilbene α-Glucoside by the Combination of Cyclodextrin Glucanotransferase and Amyloglucosidase.

The synthesis of a novel α-glucosylated derivative of pterostilbene was performed by a transglycosylation reaction using starch as glucosyl donor, catalyzed by cyclodextrin glucanotransferase (CGTase) from Thermoanaerobacter sp. The reaction was carried out in a buffer containing 20% (v/v) DMSO to enhance the solubility of pterostilbene. Due to the formation of several polyglucosylated products with CGTase, the yield of monoglucoside was increased by the treatment with a recombinant amyloglucosidase (STA1) from Saccharomyces cerevisiae (var. diastaticus). This enzyme was not able to hydrolyze the linkage between the glucose and pterostilbene. The monoglucoside was isolated and characterized by combining ESI-MS and 2D-NMR methods. Pterostilbene α-d-glucopyranoside is a novel compound. The α-glucosylation of pterostilbene enhanced its solubility in water to approximately 0.1 g/L. The α-glucosylation caused a slight loss of antioxidant activity towards ABTS˙⁺ radicals. Pterostilbene α-d-glucopyranoside was less toxic than pterostilbene for human SH-S5Y5 neurons, MRC5 fibroblasts and HT-29 colon cancer cells, and similar for RAW 264.7 macrophages.

Application of Response Surface Methodology for Optimization of Extracellular Glucoamylase Production by Candida guilliermondii.

OBJECTIVE: Glucoamylase is among the most important enzymes in biotechnology. The present study aims to determine better conditions for growth and glucoamylase production by Candida guilliermondii and to reduce the overall cost of the medium using Box-Behnken design with one central point and response surface methodology. METHODOLOGY: Box-Behnken factorial design based on three levels was carried out to obtain optimal medium combination of five independent variables such as initial pH, soluble starch, CH4N2O, yeast extract and MgSO4. Forty one randomized mediums were incubated in flask on a rotary shaker at 105 rpm for 72 h at 30°C. RESULTS: The production of biomass was found to be pH and starch dependent, maximum production when the starch concentration was 8 g L-1 and the initial pH was 6, while maximum glucoamylase production was found at 6.5 of initial pH, 4 g L-1 yeast extract and 6 g L-1 starch, whereas yeast extract and urea were highly significant, but interacted negatively. Box-Behnken factorial design used for the analysis of treatment combinations gave a second-order polynomial regression model with R2 = 0.976 for Biomass and R2 = 0.981 for glucoamylase. CONCLUSION: The final biomass and glucoamylase activity obtained was very close to the calculated parameters according to the p-values (p<0.001), the predicted optimal parameters were confirmed and provides a basis for further studies in baking additives and in the valuation of starch waste products.

Using a vector pool containing variable-strength promoters to optimize protein production in Yarrowia lipolytica.

BACKGROUND: The yeast Yarrowia lipolytica is an increasingly common biofactory. To enhance protein expression, several promoters have been developed, including the constitutive TEF promoter, the inducible POX2 promotor, and the hybrid hp4d promoter. Recently, new hp4d-inspired promoters have been created that couple various numbers of UAS1 tandem elements with the minimal LEU2 promoter or the TEF promoter. Three different protein-secretion signaling sequences can be used: preLip2, preXpr2, and preSuc2. RESULTS: To our knowledge, our study is the first to use a set of vectors with promoters of variable strength to produce proteins of industrial interest. We used the more conventional TEF and hp4d promoters along with five new hybrid promoters: 2UAS1-pTEF, 3UAS1-pTEF, 4UAS1-pTEF, 8UAS1-pTEF, and hp8d. We compared the production of RedStar2, glucoamylase, and xylanase C when strains were grown on three media. As expected, levels of RedStar2 and glucoamylase were greatest in the strain with the 8UAS1-pTEF promoter, which was stronger. However, surprisingly, the 2UAS1-pTEF promoter was associated with the greatest xylanase C production and activity. This finding underscored that stronger promoters are not always better when it comes to protein production. We therefore developed a method for easily identifying the best promoter for a given protein of interest. In this gateway method, genes for YFP and α-amylase were transferred into a pool of vectors containing different promoters and gene expression was then analyzed. We observed that, in most cases, protein production and activity were correlated with promoter strength, although this pattern was protein dependent. CONCLUSIONS: Protein expression depends on more than just promoter strength. Indeed, promoter suitability appears to be protein dependent; in some cases, optimal expression and activity was obtained using a weaker promoter. We showed that using a vector pool containing promoters of variable strength can be a powerful tool for rapidly identifying the best producer for a given protein of interest.

Improvement of glucoamylase production for raw-starch digestion in Aspergillus niger F-01 by maltose stearic acid ester.

OBJECTIVES: To investigate the role of maltose stearic acid ester (MSAE) for improving raw-starch-digesting glucoamylase (RSDG) production by Aspergillus niger F-01 and its regulatory mechanism. RESULTS: RSDG activity was enhanced 8.3-fold by adding 5 g MSAE to 1 l basal medium at the beginning of the culture. RSDG biosynthesis nearly ceased by adding 100 µg actinomycin D/ml or 50 µg cycloheximide/ml in a 48 h culture in the basal medium. RSDG biosynthesis was restarted by adding MSAE in the culture repressed by actinomycin D. No revival of RSDG synthesis was observed by adding MSAE in the culture repressed by cycloheximide. CONCLUSIONS: MSAE improved RSDG production in A. niger by inducing the transcription of RSDG.

Cloning, heterologous expression, and enzymatic characterization of a novel glucoamylase GlucaM from Corallococcus sp. strain EGB.

The gene encoding a novel glucoamylase (GlucaM) from the Corallococcus sp. strain EGB was cloned and heterologous expressed in Escherichia coli BL21(DE3), and the enzymatic characterization of recombinant GlucaM (rGlucaM) was determined in the study. The glucaM had an open reading frame of 1938 bp encoding GlucaM of 645 amino acids with no signal peptide. GlucaM belongs to glycosyl hydrolase family 15 and shares the highest identity 96% with the GH15 glucoamylase of Corallococcus coralloides DSM 2259. The rGlucaM with His-tag was purified by the Ni2+-NTA resin, with a specific activity from 3.4 U/mg up to 180 U/mg, and the molecular weight of rGlucaM was approximately 73 kDa on SDS-PAGE. The Km and Vmax of rGlucaM for soluble starch were 1.2 mg/mL and 46 U/mg, respectively. rGlucaM was optimally active at pH 7.0 and 50 °C and had highly tolerance to high concentrations of salts, detergents, and various organic solvents. rGlucaM hydrolyzed soluble starch to glucose, and hydrolytic activities were also detected with amylopectin, amylase, glycogen, starch (potato), α-cyclodextrin, starch (corn and potato). The analysis of hydrolysis products shown that rGlucaM with α-(1-4),(1-6)-D-glucan glucohydrolase toward substrates. These characteristics indicated that the GlucaM was a new member of glucoamylase family and a potential candidate for industrial application.

Simultaneous Production of Amyloglucosidase and Exo-Polygalacturonase by Aspergillus niger in a Rotating Drum Reactor.

Simultaneous production of amyloglucosidase (AMG) and exo-polygalacturonase (exo-PG) was carried out by Aspergillus niger in substrate of defatted rice bran in a rotating drum bioreactor (RDB) and studied by a 31 × 22 factorial experimental design. Variables under study were A. niger strains (A. niger NRRL 3122 and A. niger t0005/007-2), types of inoculum (spore suspension and fermented bran), and types of inducer (starch, pectin, and a mix of both). Solid-state fermentation process (SSF) was conducted at 30 °C under 60-vvm aeration for 96 h in a pilot scale. Production of AMG and exo-PG was significantly affected by the fungal strain and the type of inoculum, but inducers did not trigger any significant effect, an evidence of the fact that these enzymes are constitutive. The maximum activity of exo-PG was 84 U gdm-1 whereas the maximum yield of AMG was 886.25 U gdm-1.

Heterologous, Expression, and Characterization of Thermostable Glucoamylase Derived from Aspergillus flavus NSH9 in Pichia pastoris.

A novel thermostable glucoamylase cDNA without starch binding domain (SBD) of Aspergillus flavus NSH9 was successfully identified, isolated, and overexpressed in Pichia pastoris GS115. The complete open reading frame of glucoamylase from Aspergillus flavus NSH9 was identified by employing PCR that encodes 493 amino acids lacking in the SBD. The first 17 amino acids were presumed to be a signal peptide. The cDNA was cloned into Pichia pastoris and the highest expression of recombinant glucoamylase (rGA) was observed after 8 days of incubation period with 1% methanol. The molecular weight of the purified rGA was about 78 kDa and exhibited optimum catalytic activity at pH 5.0 and temperature of 70°C. The enzyme was stable at higher temperature with 50% of residual activity observed after 20 min at 90°C and 100°C. Low concentration of metal (Mg(++), Fe(++), Zn(++), Cu(++), and Pb(++)) had positive effect on rGA activity. This rGA has the potential for use and application in the saccharification steps, due to its thermostability, in the starch processing industries.

Improvement of biomass production and glucoamylase activity by Candida famata using factorial design.

To improve biomass production and glucoamylase activity (GA) by Candida famata, culture conditions were optimized. A 2(3) full factorial design (FFD) with a response surface model was used to evaluate the effects and interactions of pH (X1 ), time of cultivation (X2 ), and starch concentration (X3 ) on the biomass production and enzyme activity. A total of 16 experiments were conducted toward the construction of an empiric model and a first-order equation. It was found that all factors (X1 , X2 , and X3 ) and their interactions were significant at a certain confidence level (P < 0.05). Using this methodology, the optimum values of the three tested parameters were obtained as follows: pH 6; time of cultivation 24 H and starch concentration 7 g/L, respectively. Our results showed that the starch concentration (X3) has significantly influenced both dependent variables, biomass production and GA of C. famata. Under this optimized medium, the experimental biomass production and GA obtained were 1.8 ± 0.54 g/L and 0.078 ± 0.012 µmol/L/Min, about 1.5- and 1.8-fold, respectively, higher than those in basal medium. The (R(2) ) coefficients obtained were 0.997 and 0.990, indicating an adequate degree of reliability in the model. Approximately 99% of validity of the predicted value was achieved.

[Construction and application of black-box model for glucoamylase production by Aspergillus niger].

Carbon-limited continuous culture was used to study the relationship between the growth of Aspergillus niger and the production of glucoamylase. The result showed that when the specific growth rate was lower than 0.068 h(-1), the production of glucoamylase was growth-associated, when the specific growth rate was higher than 0.068 h(-1), the production of glucoamylase was not growth-associated. Based on the result of continuous culture, the Monod dynamics model of glucose consumption of A. niger was constructed, Combining Herbert-Pirt equation of glucose and oxygen consumption with Luedeking-Piret equation of enzyme production, the black-box model of Aspergillus niger for enzyme production was established. The exponential fed-batch culture was designed to control the specific growth rate at 0.05 h(-1) by using this model and the highest yield for glucoamylase production by A. niger reached 0.127 g glucoamylase/g glucose. The black-box model constructed in this study successfully described the glucoamylase production by A. niger and the result of the model fitted the measured value well. The black-box model could guide the design and optimization of glucoamylase production by A. niger.

Dependence of fungal characteristics on seed morphology and shear stress in bioreactors.

The fungal morphology during submerged cultivations has a profound influence on the overall performance of bioreactors. In this research, glucoamylase production by Aspergillus niger has been taken as a model to improve more insights. The morphology engineering could be conducted effectively by changing the seed morphology, as well as specific power input. During the fed-batch cultivations, pellet formation under milder shear stress field helped to reduce the broth viscosity, thus relieving oxygen limitation and promoting the enzyme production. Furthermore, we found that the relation between the shear stress field, which was characterized by energy dissipation rate/circulation function (EDCF), and enzyme activity was consistent with quadratic parabola, which threw light on the process optimization and scale-up for industrial enzyme production.

Efficient and cost-reduced glucoamylase fed-batch production with alternative carbon sources.

Glucoamylase is an important industrial enzyme. Glucoamylase production by industrial Aspergillus niger strain featured with two major problems: (i) empirical substrate feeding methods deteriorating the fermentation performance; and (ii) the high raw materials cost limiting the economics of the glucoamylase product with delegated specification. In this study, we first proposed a novel three-stage varied-rate substrate feeding strategy for efficient glucoamylase production in a 5 L bioreactor using the standard feeding medium, by comparing the changing patterns of the important physiological parameters such as DO, OUR, RQ, etc., when using different substrate feeding strategies. With this strategy, the glucoamylase activity and productivity reached higher levels of 11,000 U/ml and 84.6 U/ml/h, respectively. The performance enhancement in this case was beneficial from the following results: DO and OUR could be controlled at the higher levels (30%, 43.83 mmol/l/h), while RQ was maintained at a stable/lower level of 0.60 simultaneously throughout the fed-batch phase. Based on this three-stage varied-rate substrate feeding strategy, we further evaluated the economics of using alternative carbon sources, attempting to reduce the raw materials cost. The results revealed that cornstarch hydrolysate could be considered as the best carbon source to replace the standard and expensive feeding medium. In this case, the production cost of the glucoamylase with delegated specification (5,000 U/ml) could be saved by more than 61% while the product quality be ensured simultaneously. The proposed strategy showed application potential in improving the economics of industrial glucoamylase production.

The pharmacological chaperone AT2220 increases the specific activity and lysosomal delivery of mutant acid alpha-glucosidase, and promotes glycogen reduction in a transgenic mouse model of Pompe disease.

Pompe disease is an inherited lysosomal storage disorder that results from a deficiency in acid α-glucosidase (GAA) activity due to mutations in the GAA gene. Pompe disease is characterized by accumulation of lysosomal glycogen primarily in heart and skeletal muscles, which leads to progressive muscle weakness. We have shown previously that the small molecule pharmacological chaperone AT2220 (1-deoxynojirimycin hydrochloride, duvoglustat hydrochloride) binds and stabilizes wild-type as well as multiple mutant forms of GAA, and can lead to higher cellular levels of GAA. In this study, we examined the effect of AT2220 on mutant GAA, in vitro and in vivo, with a primary focus on the endoplasmic reticulum (ER)-retained P545L mutant form of human GAA (P545L GAA). AT2220 increased the specific activity of P545L GAA toward both natural (glycogen) and artificial substrates in vitro. Incubation with AT2220 also increased the ER export, lysosomal delivery, proteolytic processing, and stability of P545L GAA. In a new transgenic mouse model of Pompe disease that expresses human P545L on a Gaa knockout background (Tg/KO) and is characterized by reduced GAA activity and elevated glycogen levels in disease-relevant tissues, daily oral administration of AT2220 for 4 weeks resulted in significant and dose-dependent increases in mature lysosomal GAA isoforms and GAA activity in heart and skeletal muscles. Importantly, oral administration of AT2220 also resulted in significant glycogen reduction in disease-relevant tissues. Compared to daily administration, less-frequent AT2220 administration, including repeated cycles of 4 or 5 days with AT2220 followed by 3 or 2 days without drug, respectively, resulted in even greater glycogen reductions. Collectively, these data indicate that AT2220 increases the specific activity, trafficking, and lysosomal stability of P545L GAA, leads to increased levels of mature GAA in lysosomes, and promotes glycogen reduction in situ. As such, AT2220 may warrant further evaluation as a treatment for Pompe disease.

Enhanced production of Aspergillus niger laccase-like multicopper oxidases through mRNA optimization of the glucoamylase expression system.

In filamentous fungi, most of the strategies used for the improvement of protein yields have been based on an increase in the transcript levels of a target gene. Strategies focusing at the translational level have been also described, but are far less explored. Here the 5' untranslated sequence of the glaA mRNA, a widely used expression system for the expression of recombinant proteins, was modified by the introduction of different nucleotide elements that have positive role in the translation process. Five Aspergillus niger laccase-like multicopper oxidases (MCOs) coding genes were fused to the native glaA 5'UTR and the three synthetic versions (sUTR1, sUTR2, and sUTR3) as well, and placed under the control of the glucoamylase gene promoter. Afterwards, a total of 20 fungal transformations were done using A. niger N593 as a recipient strain and 50 transformants per transformation were isolated and analyzed. The result of the incorporation of the synthetic 5'UTRs on the overall productivity of the transformants was assessed, on one hand by monitoring the laccase activity of all the isolated transformants, and on the other hand by quantifying and comparing the activity of those secreting the highest level of each MCO. For this purpose, a high-throughput method for the screening and selection of the best producers was developed. Once the best transformants producing the highest yield of McoA, McoB, McoC, McoD, and McoJ laccases were selected, their production level was quantified in supernatants of liquid cultures. The results obtained in this work indicate that modifications in the native glaA 5'UTR can lead to improvements in protein yields.

Identification of regulatory elements in the glucoamylase-encoding gene (glaB) promoter from Aspergillus oryzae.

The Aspergillus oryzae glucoamylase-encoding gene glaB is expressed specifically and strongly only during solid-state cultivation (SSC). To elucidate the basis for the specificity, the glaB promoter was analyzed by electrophoretic gel mobility shift assay (EMSA) which indicated two protein-binding elements from -382 to -353 and from -332 to -313. To confirm that these regions contained cis-elements, deletion analysis of the promoter was undertaken using ß-glucuronidase as a reporter. The results of the deletion analysis were consistent with the EMSA results. The promoter missing the -332 to -313 element was not induced by low water activity stress during SSC.

The transcriptomic fingerprint of glucoamylase over-expression in Aspergillus niger.

BACKGROUND: Filamentous fungi such as Aspergillus niger are well known for their exceptionally high capacity for secretion of proteins, organic acids, and secondary metabolites and they are therefore used in biotechnology as versatile microbial production platforms. However, system-wide insights into their metabolic and secretory capacities are sparse and rational strain improvement approaches are therefore limited. In order to gain a genome-wide view on the transcriptional regulation of the protein secretory pathway of A. niger, we investigated the transcriptome of A. niger when it was forced to overexpression the glaA gene (encoding glucoamylase, GlaA) and secrete GlaA to high level. RESULTS: An A. niger wild-type strain and a GlaA over-expressing strain, containing multiple copies of the glaA gene, were cultivated under maltose-limited chemostat conditions (specific growth rate 0.1 h-1). Elevated glaA mRNA and extracellular GlaA levels in the over-expressing strain were accompanied by elevated transcript levels from 772 genes and lowered transcript levels from 815 genes when compared to the wild-type strain. Using GO term enrichment analysis, four higher-order categories were identified in the up-regulated gene set: i) endoplasmic reticulum (ER) membrane translocation, ii) protein glycosylation, iii) vesicle transport, and iv) ion homeostasis. Among these, about 130 genes had predicted functions for the passage of proteins through the ER and those genes included target genes of the HacA transcription factor that mediates the unfolded protein response (UPR), e.g. bipA, clxA, prpA, tigA and pdiA. In order to identify those genes that are important for high-level secretion of proteins by A. niger, we compared the transcriptome of the GlaA overexpression strain of A. niger with six other relevant transcriptomes of A. niger. Overall, 40 genes were found to have either elevated (from 36 genes) or lowered (from 4 genes) transcript levels under all conditions that were examined, thus defining the core set of genes important for ensuring high protein traffic through the secretory pathway. CONCLUSION: We have defined the A. niger genes that respond to elevated secretion of GlaA and, furthermore, we have defined a core set of genes that appear to be involved more generally in the intensified traffic of proteins through the secretory pathway of A. niger. The consistent up-regulation of a gene encoding the acetyl-coenzyme A transporter suggests a possible role for transient acetylation to ensure correct folding of secreted proteins.

Indigestible dextrin is an excellent inducer for α-amylase, α-glucosidase and glucoamylase production in a submerged culture of Aspergillus oryzae.

α-Amylase activities of Aspergillus oryzae grown on dextrin or indigestible dextrin were 7·8 and 27·7 U ml(-1), respectively. Glucoamylase activities of the cultures grown on dextrin or indigestible dextrin were 5·4 and 301 mU ml(-1), respectively. The specific glucoamylase production rate in indigestible dextrin batch culture reached 1·35 U g DW(-1) h(-1). In contrast, biomass concentration of A. oryzae in indigestible dextrin culture was 35% of that in dextrin culture. Thus, the culture method using indigestible dextrin has the potential to improve amylolytic enzyme production and fungal fermentation broth rheology.