Formulation development and in-vitro evaluation of gastroretentive drug delivery system of loxoprofen sodium: A natural excipients based approach.

The limitations of conventional type delivery systems to retain drug (s) in the stomach has resulted in the development of novel gastroretentive drug delivery system. We developed single-layer effervescent floating tablets of loxoprofen sodium for prolong delivery in the stomach using natural polymers xanthan gum, guar gum and semisynthetic polymer HPMCK4M. All the formulations (F1-F9) were developed by varying concentrations of xanthan gum and HPMCK4M while guar gum concentration was kept constant. Two gas generating agent (s) incorporated were sodium bicarbonate and citric acid. All compendial pre and post-compression tests results were in the acceptable limits. FTIR analysis confirmed drug-polymer compatibility. The in-vitro drug release in simulated conditions i.e., 0.1 N HCl for 12 h revealed orderly increase in total floating time, i.e., less than 6 h for F1 over 12 h for F9. Formulations F1 to F4 were not capable to retard drug release up to 12 h, whereas F5-F7 for 12 h, while F8 and F9 for more than 12 h. Data fitting in various kinetic models showed that drug release best fit in first order kinetic model and F9 in zero order. Based on results data, F7 was the best among all.

Alkenyl succinic anhydride modified tree-gum kondagogu: A bio-based material with potential for food packaging.

Tree gums are a class of abundantly available carbohydrate polymers that have not been explored thoroughly in film fabrication for food packaging. Films obtained from pristine tree gums are often brittle, hygroscopic, and lack mechanical strength. This study focuses on the chemical modification of gum kondagogu using long-chain alkenyl groups of dodecenyl succinic anhydride (DDSA), an esterifying agent that introduces a 12-carbon hydrophobic chain to the kondagogu structure. The esterification reaction was confirmed by 1H nuclear magnetic resonance and Fourier-transform infrared spectroscopy. The effect of nano-cellulose as an additive on various film properties was investigated. The developed films were characterized for their mechanical, morphological, optical, barrier, antibacterial, and biodegradable properties. The inclusion of long-chain carbon groups acted as internal plasticizers and resulted in an amorphous structure with better film-forming ability, improved hydrophobicity, and higher elongation at break values. The modified films exhibited antibacterial properties and excellent biodegradability under aerobic conditions.

Synthesis and characterization of scaffolds produced under mild conditions based on oxidized cashew gums and carboxyethyl chitosan.

This study describes the development of scaffolds based on carboxyethyl chitosan (CEC) and different oxidized cashew gums (CGOx) for tissue engineering (TE) applications. After the physico-chemical characterizations of CEC and CGOx (oxidation degree of 20, 35 and 50%), these macromolecules were used for producing the CGOx-CEC hydrogels through a Schiff base reaction, in the absence of any crosslinking agent. The CGOx-CEC scaffolds obtained after a freeze-drying process were characterized for their morphology, mechanical properties, swelling ability, degradation, and porosity. Those revealed to be highly porous (25-65%), and showed a stable swelling behavior, as well as degradation properties in the absence of enzymes. The use of the cashew gum with higher degree of oxidation led to scaffolds with higher crosslinking densities and increased compressive modulus. None of the hydrogels show cytotoxicity during the 14 days of incubation. Considering all the properties mentioned, these scaffolds are excellent candidates for soft tissue regeneration, owing to the use of eco-friendly starting materials and the easy tuning of their properties.

Research progress in galactomannan-based nanomaterials: Synthesis and application.

Galactomannans are naturally occurring biocompatible and biodegradable nonionic polysaccharides comprised of mannose and galactose residues. They are under investigation for the design of various drug delivery carriers such as matrix tablets, microparticles, nanoparticles/nanocomposites, polymeric micelles, hydrogels, as well as pharmaceutical excipients. Amongst galactomannans, guar gum, locust bean gum, and fenugreek gum are the biomaterials mostly investigated for their potential utility as nanocarriers for various purposes, either in their native or modified forms. The galactomannan-based nanomaterials have been fabricated by adopting various strategies. These galactomannan nanomaterials have been tested for oral vaccination, oral insulin delivery, cancer cell & macrophage targeting, controlled drug delivery, heavy metal extraction and wound dressing applications. The galactomannan has attracted the attention of researchers as reducing agents for the green synthesis of metal nanoparticles as well. These nanometals have shown improved antimicrobial, antioxidant and anticancer activities. In vitro toxicity of the nanomaterials is also assessed in some instances. Others such as cassia gum, tara gum, Delonix, Leucaena leucocephala, Punica granatum galactomannans are amongst the least studied materials for biological applications. This review describes various strategies adopted for the synthesis of galactomannan-based nanomaterials, their properties and applications, especially in the field of drug delivery.

Synthesis of quaternised guar gum using Taguchi L(16) orthogonal array.

Quaternised polysaccharides have diverse applications due to introduction of quaternary ammonium groups in the biopolymer. In the present study, quaternization of guar gum was carried out by adopting the Taguchi's approach of robust design of experiments for optimizing the levels of the factors to obtain quaternized guar gum with higher DS. The methodology employed far less number of experiments than the classical method which necessitates higher number of chemical reactions to achieve the required derivatisation. The application of Taguchi's L16 (45) orthogonal array resulted in DS of 0.49. The optimized experimental levels were 3.24 mol/AGU of NaOH and 2.04 mol/AGU of CHPTAC for 2 h at 30 °C keeping the gum: liquor ratio 1:20. The study established that Taguchi methodology provided a statistically sound and green approach for optimization of reaction conditions. The modified products were characterised by FTIR, 1H-NMR, 13C-NMR, DEPT-135, HSQC and HMBC spectroscopic methods.

Guar gum cinnamate ouzo nanoparticles for bacterial contact killing in water environment.

Herein we report the synthesis of newer guar gum cinnamate esters (GGC) following a Hofmeister cation guided homogeneous phase reaction. High degree of substitution (DS) guar gum cinnamate was obtained using, cinnamic acid halide reactant at a 1:3 M ratio. The biopolymer was fully characterized in FT-IR,13C NMR, XRD and thermal analysis. Nanoparticles were further developed in a facile ouzo solvent diffusion technique. SEM studies confirmed quasi spherical shape of the nanoparticles (GGCN) with an average size of 200 nm. Nanoparticles GGCN, expressed antibacterial activity against water borne gram negative and gram positive bacteria. The MIC was recorded at 300 µg mL-1against Escherichia coli and 500 µg mL-1against Staphylococcus aureus. Bacterial contact killing was confirmed from the bacterial morphology studies in SEM. Thus, nanoparticles from GGC may be employed for bacterial killing and water decontamination.

A comparative study of sulfated tara gum: RSM optimization and structural characterization.

Interest in galactomannans and its derivatives as a functional health supplement is growing based on physicochemical properties. In this work, the optimized conditions of sulfated tara gum (STG) with a maximum DS of 0.66 by box-behnken design (BBD) were obtained as following: ratio of chlorosulfonic acid/pyridine 3:1, reaction time 4 h and reaction temperature 40 °C. The structure features of STG such as the degree of substitution (DS), substitution position, weight average molar mass (MW), monosaccharide components and chain conformation were investigated. Decreasing of MW, the increasing of Z-average radius of gyration (〈S2〉Z1/2) and specific volume for gyration (SVg) were obtained by SEC-MALLS. In addition, the structural properties of four sulfated galactomannans were comparatively investigated and analyzed based on our earlier reports of sulfated fenugreek gum, guar gum and locust bean gum. A conclusion was drown that higher galactose branch could enhance steric hindrance, which was inferred as one of the significant factors for the derivatization efficiency, thus affecting the DS, MW and conformational transition of sulfated galactomannans. This study will provide valuable information for further research on the comparison of bioactivities and medical application of galactomannans family.

Sonication-assisted synthesis of a new heterostructured schiff base ligand Silver-Guar gum encapsulated nanocomposite as a visible light photocatalyst.

A heterostructured Schiff base ligand (Benzildiethylenetriamine)-Silver-Guar gum encapsulated nanocomposites was intended to prepare by simple sonication assisted reflux method. Appropriate composition of purified guar gum, Schiff base ligand and silver nitrate were used for the synthesis. The synthesised nanocomposites were characterised by photoluminescence spectrum, UV-vis diffuse reflectance spectrophotometer, Fourier transform infra-red spectroscopy, X-ray diffractometer, scanning electron microscopy and transmission electron microscopy. The crystalline peaks of XRD and FTIR reveals that Schiff base ligand and guar gum forms metal-organic matrix. Morphology studies have confirmed the organic framework structure and metallic silver nanoparticles are embedded on the organic framework. The efficiency of nanocomposites depends on adsorption capacity and silver nanoparticles that are encapsulated thereby increasing the visible light absorption through surface plasma resonance. The nanocomposite was proved to be highly selective in hydrogenation reaction which favoured the formation of aniline from nitrobenzene as single product with short reaction time and 90% conversion.

Sonochemical synthesis of gum guar biopolymer stabilized copper oxide on exfoliated graphite: Application for enhanced electrochemical detection of H2O2 in milk and pharmaceutical samples.

A novel and cost-effective synthesis of biopolymer-based organic and inorganic composite materials have received substantial attention in a broad range application including electroanalysis of small molecules. In this perspective, we report the synthesis of gum guar (guar) biopolymer stabilized cupric oxide decorated on exfoliated graphite (GR-guar/CuO) composite. Different physicochemical characterization methods were used to confirm the successful exfoliation of graphite and formation of the GR-guar/CuO composite. A simple sonochemical method has been used for the preparation of guar stabilized exfoliated graphite (GR-guar). The flower-like CuO on GR-guar and guar stabilized CuO (CuO-guar) composites were synthesized using a hydrothermal method. Cyclic voltammetric studies revealed that the GR-guar/CuO composite modified screen-printed carbon electrode (SPCE) had enhanced electro-reduction ability towards H2O2 than GR-guar and pristine graphite/CuO-guar modified SPCEs. Under optimized experimental conditions, the GR-guar/CuO composite modified electrode detects H2O2 in the response ranges from 0.02 to 1296.6 µM. The sensor shows a lower detection limit of 5.8 nM with high sensitivity. The as-prepared GR-guar/CuO composite sensor is highly reproducible and had excellent selectivity and practicality towards the detection of H2O2. Consequently, the fabricated sensor can be used for the accurate detection of H2O2 in real samples.

Synthesis and evaluation of hydrophobically modified fenugreek gum for potential hepatic drug delivery.

The objective of this study was to hydrophobically modify fenugreek gum (FG) and to further evaluate the potential application of the obtained derivative in liver-targeted drug delivery system. Stearic acid (C18) was conjugated with FG (FG-C18) by a simple esterification reaction. The obtained FG-C18 was then characterized on its chemical structure by Fourier transform infrared spectroscopy and 1H-nuclear magnetic resonance. The self-assembled nanomicelles (NMs) of FG-C18 in water were prepared by an ultrasonication method. The average diameter and zeta potential of FG-C18 NMs were 196.70 ± 6.12 nm and -31.79 ± 1.58 mV, respectively. FG-C18 NMs appeared as spherical particles under transmission electron microscopy and possessed a critical micellar concentration of 0.042 mg/ml by pyrene fluorescence probe method. A low toxicity of FG-C18 was revealed on both HepG2 and MCF-7 cells at 0.1-100 mg/ml. Haemolysis of FG-C18 was less than 5%. Cellular uptake of coumarin-6 into HepG2 cells was enhanced by treating with C6-loaded FG-C18 NMs compared to free coumarin-6. These results suggest that FG-C18 have a potential application for a liver targeted drug delivery.

Physicochemical, thermal and rheological properties of synthesized carboxymethyl tara gum (Caesalpinia spinosa).

Carboxymethyl tara gum (CMTG) was synthesized from the reaction between tara gum (TG) and monochloroacetic acid (MCA) in the presence of sodium hydroxide. The modification reaction was optimized in terms of the MCA/NaOH ratio, reaction time and temperature evaluated for degree of substitution (DS). The etherification was confirmed by FTIR and 13C NMR spectroscopy, and it was characterized by different analyses. After carboxymethylation, CMTG showed new bonds at 1592, 1413 and 1320 cm-1 by FTIR and a new peak at δ = 178 ppm by 13C NMR in response to the insertion of the carbonyl group. The microscopy showed higher degradation on the surface of the CMTG particles, and XRD indicated low crystallinity of the CMTG. Static light scattering demonstrated a reduction in the molar mass of tara gum after carboxymethylation. Thermal analysis (TGA and DSC) revealed a lower thermal stability of carboxymethylated gum compared to that of unmodified gum. Despite the insertion of negative charges demonstrated by the potential-zeta, CMTG and TG presented pseudoplastic behavior according to the rheological analyses, and CMTG presented lower viscosity at the concentrations that were studied.

Solvent-free synthesis of acetylated cashew gum for oral delivery system of insulin.

Cashew gum (CG) is a biopolymer that presents a favorable chemical environment for structural modifications, which leads to more stable and resistant colloidal systems. The gum was subjected to an acetylation reaction using a fast, simple, solvent-free and low cost methodology. The derivative was characterized by infrared and NMR spectroscopy, elemental analysis, coefficient of solubility and zeta potential. The modified biopolymer was used as a platform for drug delivery systems using insulin as a model drug. Nanoparticles were developed through the technique of polyelectrolytic complexation and were characterized by size, surface charge, entrapment efficiency and gastrointestinal release profile. The nanoparticles presented size of 460 nm with a 52.5% efficiency of entrapment of insulin and the electrostatic stabilization was suggested by the zeta potential of + 30.6 mV. Sustained release of insulin was observed for up to 24 h. The results showed that acetylated cashew gum (ACG) presented potential as a vehicle for sustained oral insulin release.

Synthesis and characterization of biopolymer based hybrid hydrogel nanocomposite and study of their electrochemical efficacy.

A highly competent material, based on poly lactic acid (PLLA) grafted hydroxypropyl guar gum (HPG-g-PLLA) and polypyrrole/carboxylated multiwalled carbon nanotube (PPy/C-MWCNT) composite of various binary composition and copolymer of one of these nanocomposites have been synthesized successfully by in-situ polymerization. The environmentally affable nanocomposites have been characterized by spectroscopy, microscopy and thermogravimetry. Cytotoxicity of bio-nanocomposite has been inquired by cell viability study, which reveals its eco-friendly nature. The electrochemical properties of the biomaterials have been appraised by cyclic voltammetric studies. The PPy/C-MWCNT composite having 1 wt% C-MWCNT appears as the optimum composition from electrochemical studies. The hydrogel nanocomposite (HPG-g-PLLA5/0.5) copolymer behaves as a super ordinate material than pure PPy and PPy/C-MWCNT in every aspect of electrochemical properties like current density, stability, processibility and reversibility. Moreover the hydrogel nanocomposite, making electrode fabrication more simple and binder-free, nullifies all the interfacial complications arising from binders as well.

Mucoadhesive guargum hydrogel inter-connected chitosan-g-polycaprolactone micelles for rifampicin delivery.

Natural polymer guar gum has one of the highest viscosities in water solution and hence, these are significantly used in pharmaceutical applications. Guar gum inter-connected micelles as a new carrier has been developed for poor water soluble rifampicin drug. The hydrogel inter-connected micelle core was formulated as a hydrophilic inner and hydrophobic outer core by using guar gum/chitosan/polycaprolactone and the carrier interaction with rifampicin was confirmed by FT-IR. The morphological observations were carried out through TEM, SEM and AFM analysis. The encapsulation efficiency and in-vitro drug release behavior of prepared hydrogel based micelle system was analyzed by UV-vis spectrometry. The anti-bacterial activity against K. pneumoniae and S. aureus was studied by observing their ruptured surface by SEM. The cytotoxicity study reveals that the pure polymeric system has no toxic effect whereas drug loaded ones showed superior activity against THP-1 cells. From the cell apoptosis analyses, the apoptosis was carried out in a time dependent manner. The cell uptake behavior was also observed in THP-1 cells which indicate that the hydrogel based micelle system is an excellent material for the mucoadhesive on intracellular alveolar macrophage treatment.

Pickering emulsion stabilized by cashew gum- poly-l-lactide copolymer nanoparticles: Synthesis, characterization and amphotericin B encapsulation.

In this work, we provide proof-of-concept of formation, physical characteristics and potential use as a drug delivery formulation of Pickering emulsions (PE) obtained by a novel method that combines nanoprecipitation with subsequent spontaneous emulsification process. To this end, pre-formed ultra-small (d.∼10 nm) nanoprecipitated nanoparticles of hydrophobic derivatives of cashew tree gum grafted with polylactide (CGPLAP), were conceived to stabilize Pickering emulsions obtained by spontaneous emulsification. These were also loaded with Amphotericin B (AmB), a drug of low oral bioavailability used in the therapy of neglected diseases such as leishmaniasis. The graft reaction was performed in two CG/PLA molar ratio conditions (1:1 and 1:10). Emulsions were prepared by adding the organic phase (Miglyol 812®) in the aqueous phase (nanoprecipitated CGPLAP), resulting the immediate emulsion formation. The isolation by centrifugation does not destabilize or separate the nanoparticles from oil droplets of the PE emulsion. Emulsions with CGPLAP 1:1 presented unimodal distributions at different CGPLA concentration, lower values in size and PDI and the best stability over time. The AmB was incorporated in the emulsions with a process efficiency of 21-47%, as determined by UV-vis. AmB in CGPLAP emulsions is in less aggregated state than observed in commercial AmB formulation.

Selenium incorporated guar gum nanoparticles safeguard mitochondrial bioenergetics during ischemia reperfusion injury in H9c2 cardiac cells.

The application of nanotechnology has created high impact in diagnosis and prognosis of various disorders including cardiovascular diseases. In the present study, we investigated the beneficial effect of selenium incorporated guar gum nanoparticles (SGG) compared to nascent selenium (Se) and guar gum nanoparticles (GGN) against ischemiareperfusion (IR) induced alterations in oxidative phosphorylation and energy metabolism in H9c2 cardiac cells. Ischemia and reperfusion were induced for 1h. The alterations in activities of various complexes (complex 1, II, III and IV) of mitochondrial electron transport chain (ETC), aconitase activity, oxygen consumption rate, and the ATP content were seen. The role of heat shock protein, hypoxia inducible factor-1α and atrial natriuretic factor (ANP) were also analyzed. Then the beneficial properties of various particles like Se, GGN and SGG were evaluated. Among these, SGG treatment (1 and 5ng) was found to be more beneficial compared to other particles. Overall results reveal that SGG nanoparticles are effective in protecting H9c2 cardiac cells from IR injury via improving the efficiency of ETC in H9c2 cells.

Determination of the Degree of Substitution of Cationic Guar Gum by Headspace-Based Gas Chromatography during Its Synthesis.

This study reports on a headspace-based gas chromatography (HS-GC) technique for determining the degree of substitution (DS) of cationic guar gum during the synthesis process. The method is based on the determination of 2,3-epoxypropyltrimethylammonium chloride in the process medium. After a modest pretreatment procedure, the sample was added to a headspace vial containing bicarbonate solution for measurement of evolved CO2 by HS-GC. The results showed that the method had a good precision (relative standard deviation of <3.60%) and accuracy for the 2,3-epoxypropyltrimethylammonium chloride measurement, with recoveries in the range of 96-102%, matching with the data obtained by a reference method, and were within 12% of the values obtained by the more arduous Kjeldahl method for the calculated DS of cationic guar gum. The HS-GC method requires only a small volume of sample and, thus, is suitable for determining the DS of cationic guar gum in laboratory-scale process-related applications.

Carboxymethyl sesbania gum: Synthesis, characterization and evaluation for drug delivery.

In the present study, carboxymethyl Sesbania gum was synthesized and evaluated for drug delivery. Carboxymethylation was carried out by reacting with monochloroacetic acid under alkaline conditions. Modification of the gum was confirmed by Fourier-transform infrared spectroscopy. The degree of carboxymethyl substitution was determined to be 1.3. Carboxymethylation improved the flow properties, increased the degree of crystallinity and changed the compression behaviour from elastic to plastic. Further, the interaction between the modified gum and Ca2+-ions was optimized employing a 3-factor, 3-level central composite experimental design to prepare mucoadhesive sustained release beads using metformin hydrochloride as the model drug. The optimal calculated parameters were- concentrations of carboxymethyl Sesbania gum-2.5%(w/v), metformin hydrochloride- 50%(w/w) and calcium chloride- 15%(w/v), which provided beads with%yield of 160 and entrapment efficiency of 39.3%. The optimized batch of beads released, 68% of metformin over 12h, following the Higuchi's release kinetics with the mechanism of release being diffusion through the matrix.

Synthesis of 2-alkenyl-3-butoxypropyl guar gum with enhanced rheological properties.

A new guar gum derivative was synthesized though the nucleophilic substitution of sodium hydroxide-activated guar gum with n-butyl glycidyl (BGE) ether. The physicochemical properties of 2-alkenyl-3-butoxypropyl guar gum (ABPG) were characterized by attenuated total reflection Fourier transform infrared spectrometry (ATR-FTIR), X-ray diffraction (XRD) and thermal gravimetric analyses (TGA). The results showed that sodium hydroxide can be effectively substituted with BGE to form the ABPG. The steady and dynamic rheological properties of the aqueous solution and ABPG gel were determined using an RS6000 rheometer. Compared with the guar gum, ABPG enhanced the thickening property and improved the solution stability. The ABPG gel exhibited good temperature resistance and shear stability properties.

Acetylated cashew gum-based nanoparticles for transdermal delivery of diclofenac diethyl amine.

Nanoprecipitation and dialysis methods were employed to obtain nanoparticles (NPs) of acetylated cashew gum (ACG). NPs synthesized by dialysis showed greater average size compared to those synthesized by nanoprecipitation, but they presented improved stability and yield. NPs were loaded with diclofenac diethylamine and the efficiency of the drug incorporation was over 60% for both methods, for an ACG:NP a weight ratio of 10:1. The cytotoxicity assay demonstrated that the NPs had no significant effect on the cell viability, verifying their biocompatibility. The release profile for the diclofenac diethylamine associated with the ACG-NPs showed a more controlled release compared to the free drug and a Fickian diffusion mechanism was observed. Transdermal permeation reached 90% penetration of the drug.