Background concentrations and spatial distribution of PFAS in surface waters and sediments of the greater Melbourne area, Australia.

A survey of per- and polyfluoroalkyl substances (PFAS) was conducted in Melbourne, Australia to determine background concentrations in residential, industrial, municipal wastewater treatment plants, and rural land uses. Surface water and sediment samples collected from 65 sites with different catchment land uses were analysed for thirty-three PFAS. Twenty-two out of thirty-three targeted PFAS were detected, with at least one PFAS species was detected in 98% water samples and 8% sediment samples. One site was determined to have point-source pollution from an airport (surface water Σ33PFAS = 4261 ng/L) and was excluded from statistical analyses. The median Σ33PFAS concentration in surface water was 63.5 ng/L and the average was 78.6 ng/L (range < DL-526 ng/L). PFAS species with the highest median concentrations were PFBA (11.3 ng/L), PFHxA (9.2 ng/L), PFOA (8.3 ng/L), PFOS (8.0 ng/L), PFPeA (7.5 ng/L), PFHpA (3.2 ng/L), and PFHxS (2.9 ng/L). The average Σ4PFAS in sediments was 0.35 ng/g d.w. (range =

Assessing aerobic biotransformation of 8:2 fluorotelomer alcohol in aqueous film-forming foam (AFFF)-impacted soils: Pathways and microbial community dynamics.

Production of 8:2 fluorotelomer alcohol (8:2 FTOH) for industrial and consumer products, including aqueous film-forming foams (AFFFs) used for firefighting, has resulted in its widespread occurrence in the environment. However, the fate of 8:2 FTOH at AFFF-impacted sites remains largely unknown. Using AFFF-impacted soils from two United States Air Force Bases, microcosm experiments evaluated the aerobic biotransformation of 8:2 FTOH (extent and byproduct formation) and the dose-response on microbial communities due to 8:2 FTOH exposure. Despite different microbial communities, rapid transformation of 8:2 FTOH was observed during a 90-day incubation in the two soils, and 7:2 secondary fluorotelomer alcohol (7:2 sFTOH) and perfluorooctanoic acid (PFOA) were detected as major transformation products. Novel transformation products, including perfluoroalkane-like compounds (1H-perfluoroheptane, 1H-perfluorohexane, and perfluoroheptanal) were identified by liquid chromatography-high resolution mass spectrometry (LC-HRMS) and used to develop aerobic 8:2 FTOH biotransformation pathways. Microbial community analysis suggests that species from genus Sphingomonas are potential 8:2 FTOH degraders based on increased abundance in both soils after exposure, and the genus Afipia may be more tolerant to and/or involved in the transformation of 8:2 FTOH at elevated concentrations. These findings demonstrate the potential role of biological processes on PFAS fate at AFFF-impacted sites through fluorotelomer biotransformation.

Microextraction and Determination of Poly- and Perfluoroalkyl Substances, Challenges, and Future Trends.

Per- and polyfluoroalkyl substances (PFAS) are fluorocarbon compounds in which hydrogen atoms have been partly or entirely replaced by fluorine. They have a very wide range of applications, while they are persistent in the environment and exhibit bioaccumulative and toxic properties. Neither chemical nor biological mechanisms can decompose PFAS due to their strong C-F bonds. PFAS have shown adverse effects on various organisms, even at trace levels. Accordingly, highly sensitive and selective analytical methods are required for their tracing in biological and environmental matrices. The physicochemical properties of PFAS like surfactant characteristics and high-water solubility are unique and different from other known pollutants. Accordingly, the number of articles on the analysis of PFAS is less than the other well-known contaminants. The routine PFAS sample preparation methods (like solvent extraction) coupled with chromatographic systems, face challenges such as high limits of detection, need for laborious derivatization, limited selectivity, and expensive instrumentation. Recent efforts to address these limitations have aroused considerable attention to the development of microextraction techniques, which are consistent with the principles of green chemistry and can be made easily portable and automated. Moreover, these methods have shown enough sensitivity and selectivity for the analysis of different analytes (including PFAS) in a wide range of samples with different matrices. This research aims to review the microextraction methods and detection techniques, applied for the sample pretreatment of PFAS in various matrices, along with a critical discussion of the challenges and potential future trends.

The key role of propane in a sustainable cooling sector.

Split air conditioners (ACs) are the most used appliance for space cooling worldwide. The phase-down of refrigerants with high global warming potential (GWP) prescribed by the Kigali Amendment to the Montreal Protocol has triggered a major effort to find less harmful alternative refrigerants. HFC-32 is currently the most common refrigerant to replace HFC-410A in split ACs. The GWP of HFC-32 is about one-third that of HFC-410A but still considerably higher than that of a growing number of nonfluorinated alternatives like propane with a GWP of <1, which have recently become commercially available for split ACs. Here, we show that a switch to propane as an energy-efficient and commercially available low-GWP alternative in split ACs could avoid 0.09 (0.06 to 0.12) °C increase in global temperature by the end of the century. This is significantly more than the 0.03 (0.02 to 0.05) °C avoided warming from a complete switch to HFC-32 in split ACs.

Online extraction based on ionic covalent organic framework for sensitive determination of trace per- and polyfluorinated alkyl substances in seafoods by UHPLC-MS/MS.

The ionic covalent organic framework (TPB-BFBIm-iCOF) was facilely synthetized by the size-controllable confinement method and chosen as the online solid phase extraction (SPE) adsorbent. This adsorbent showed fast adsorption equilibrium (5 min) and high adsorption capacity (87.7-140.8 mg g-1) for the per- and polyfluorinated alkyl substances (PFASs). The TPB-BFBIm-iCOF microsphere revealed the satisfactory enrichment performance for PFASs by means of the electrostatic interaction, hydrophobic effect and ordered channel structure. After extraction, the loaded TPB-BFBIm-iCOF-online SPE column was eluted and applied to the ultrahigh performance liquid chromatography tandem mass spectrometry analysis. Under the optimum conditions, the method displayed satisfactory linearity (R2 ≥ 0.9910) and low limits of detection (≤0.0017 ng g-1) for five seafoods. The relative recoveries of PFASs were 85.3%-109.4% with the relative standard deviation ≤ 9.9%. The method exhibited potential value in monitoring the toxicokinetics and environmental behaviors of PFASs.

Electrospray Ionization Inlet Tandem Mass Spectrometry: A Hyphenated Method for the Sensitive Determination of Chemicals in Animal Tissues and Body Fluids.

This study demonstrates the utility of electrospray ionization inlet mass spectrometry (ESII-MS/MS) for the quantitative determination of analytes in complex animal matrices without chromatographic separation. Veterinary drugs including flunixin, its metabolite 5-hydroxyflunixin, and zilpaterol and persistent organic perfluoroalkyl compounds were determined in incurred plasma, urine, and/or tissue samples. Limits of detection (LOD) of zilpaterol in kidney, liver, lung, and muscle ranged from 0.02 to 0.06 ng/g, whereas the limit of quantitation (LOQ) for zilpaterol in all tissues was 0.1 ng/g. For urinary or plasma flunixin, 5-hydroxyflunixin, and PFOS/PFHxS, LODs ranged from 0.1 to 0.7 ng/mL while the LOQs ranged from 0.4 to 50 ng/mL. Regression coefficients for matrix-matched standard curves were 0.993-0.997, 0.977-0.999, and 0.999 for plasma, tissues, and urine, respectively. Correlations between quantitative results obtained by ESII-MS/MS and LC-MS for flunixin, 5-hydroxyflunixin, and zilpaterol ranged from 0.930 to 0.985. ESII-MS/MS provided rapid, sensitive, and accurate analyses of veterinary drugs and environmental contaminants from complex matrices without chromatographic separation.

Enantioseparation and dissipation monitoring of oxathiapiprolin in grape using supercritical fluid chromatography tandem mass spectrometry.

Oxathiapiprolin is a chiral fungicide used in China for the prevention and treatment of grape downy mildew, but its potential risk could be inaccurately assessed without distinguishing its enantiomers. In this study, an effective and sensitive chiral analytical method was first established for quantification of oxathiapiprolin enantiomers using supercritical fluid chromatography tandem mass spectrometry. Baseline separation for oxathiapiprolin enantiomers was achieved for less than 3 min by using a Lux Cellulose-2 chiral column with the resolution of 1.51. The elution order of the eluting enantiomers was identified as (-)-oxathiapiprolin and (+)-oxathiapiprolin by an optical rotation detector. The grape samples were extracted by QuEChERS method, with the average recoveries of each enantiomer in grapes were in the range of 88.1-111.8% and the relative standard deviations were less than 18.9%. The enantioselective analysis of the dissipation of oxathiapiprolin in field grape samples showed that (-)-oxathiapiprolin was dissipated faster than (+)-oxathiapiprolin. The results indicate that this proposed method could provide data support for the risk assessment of oxathiapiprolin in agricultural produces in a more accurate way.

Enantioselective residue analysis of oxathiapiprolin and its metabolite in tea and other crops by ultra-high performance liquid chromatography-tandem mass spectrometry.

Oxathiapiprolin is the first chiral piperidinyl thiazole isoxazoline fungicide developed to control downy mildew and other diseases, and there were no prior reports on its enantiomeric residue. In this study, a modified quick, easy, cheap, effective, rugged, and safe extraction and purification method followed by ultra-high performance liquid chromatography-tandem mass spectrometry determination was first developed and validated for the residue analysis of oxathiapiprolin enantiomers and its metabolite IN-E8S72 in green tea and other crops. Oxathiapiprolin enantiomers and IN-E8S72 were separated on a chiral Lux Cellulose-3 column with the use of 0.1% formic acid in acetonitrile and 5 mmol/L ammonium acetate in water as mobile phases. IN-E8S72 was eluted first, followed by (-)-oxathiapiprolin, and then (+)-oxathiapiprolin. The recoveries ranged from 53.3 to 125.3% with relative standard deviations ranging from 1.4 to 16.0%. The limits of quantification for (-)-oxathiapiprolin and (+)-oxathiapiprolin were 0.005 mg/kg in romaine lettuce, head cabbage, potato, grape, and garlic, 0.01 mg/kg in soybean and pea, and 0.025 mg/kg in green tea and dry pepper. The limits of quantification of IN-E8S72 were twice those of (-)-oxathiapiprolin. Screening results with real market samples indicated that there was no enantiomeric excess in the oxathiapiprolin residue in romaine lettuce.

Toward Comprehensive Per- and Polyfluoroalkyl Substances Annotation Using FluoroMatch Software and Intelligent High-Resolution Tandem Mass Spectrometry Acquisition.

Thousands of per- and polyfluoroalkyl substances (PFAS) exist in the environment and pose a potential health hazard. Suspect and nontarget screening with liquid chromatography (LC)-high-resolution tandem mass spectrometry (HRMS/MS) can be used for comprehensive characterization of PFAS. To date, no automated open source PFAS data analysis software exists to mine these extensive data sets. We introduce FluoroMatch, which automates file conversion, chromatographic peak picking, blank feature filtering, PFAS annotation based on precursor and fragment masses, and annotation ranking. The software library currently contains ∼7 000 PFAS fragmentation patterns based on rules derived from standards and literature, and the software automates a process for users to add additional compounds. The use of intelligent data-acquisition methods (iterative exclusion) nearly doubled the number of annotations. The software application is demonstrated by characterizing PFAS in landfill leachate as well as in leachate foam generated to concentrate the compounds for remediation purposes. FluoroMatch had wide coverage, returning 27 PFAS annotations for landfill leachate samples, explaining 71% of the all-ion fragmentation (CF2)n related fragments. By improving the throughput and coverage of PFAS annotation, FluoroMatch will accelerate the discovery of PFAS posing significant human risk.

Occurrence of per- and polyfluorinated compounds in paper and board packaging materials and migration to food simulants and foodstuffs.

This work describes the screening of twenty three per- and polyfluoroalkyl substances (PFASs) in twenty five paper and board (P/B) packaging materials and their migration to several food simulants (50% ethanol, 95% ethanol and Tenax®) at different conditions of time and temperature. A different migration pattern depending on the carbon chain length was observed; while short carbon chain PFASs tend to migrate more to 50% ethanol than to 95% ethanol, long chain PFASs showed the opposite trend. On the other hand, very low migration percentages of all PFASs to Tenax® were found. Finally, migration of 9 PFASs into real foods (cereals, rice and infant milk powder) for 6 months was quantified and compared with the results obtained with the simulants. As a result, significant underestimations of the PFASs migration to foodstuffs were obtained using Tenax®, especially for short carbon chain PFASs and milk powder.

Property Estimation of Per- and Polyfluoroalkyl Substances: A Comparative Assessment of Estimation Methods.

To accurately predict the environmental fate of per- and polyfluoroalkyl substances (PFAS), high-quality physicochemical property data are required. Because such data are often not available from experiments, assessment of the accuracy of existing property estimation models is essential. The quality of predicted physicochemical property data for a set of 25 PFAS was examined using COSMOtherm, EPI Suite, the estimation models accessible through the US Environmental Protection Agency's CompTox Chemicals Dashboard, and Linear Solvation Energy Relationships (LSERs) available through the UFZ-LSER Database. The results showed that COSMOtherm made the most accurate acid dissociation constant and air-water partition ratio estimates compared with literature data. The OPEn structure-activity/property Relationship App (OPERA; developed through the CompTox Chemicals Dashboard) estimates of vapor pressure and dry octanol-air partition ratios were the most accurate compared with other models of interest. Wet octanol-water partition ratios were comparably predicted by OPERA and EPI Suite, and the organic carbon soil coefficient and solubility were well predicted by OPERA and COSMOtherm. Acid dissociation of the perfluoroalkyl acids has a significant impact on their physicochemical properties, and corrections for ionization were included where applicable. Environ Toxicol Chem 2020;39:775-786. © 2020 SETAC.

Rapid Characterization of Per- and Polyfluoroalkyl Substances (PFAS) by Ion Mobility Spectrometry-Mass Spectrometry (IMS-MS).

Per- and polyfluoroalkyl substances (PFAS) are an ensemble of persistent organic pollutants of global interest because of their associations with adverse health outcomes. Currently, environmental PFAS pollution is prolific as a result of the widespread manufacturing of these compounds and their chemical persistence. In this work, we demonstrate the advantages of adding ion mobility spectrometry (IMS) separation to existing LC-MS workflows for PFAS analysis. Using a commercially available drift tube IMS-MS, we characterized PFAS species and isomeric content in both analytical standards and environmental water samples. Molecular trendlines based on intrinsic mass and structural relationships were also explored for individual PFAS subclasses (e.g. PFSA, PFCA, etc.). Results from rapid IMS-MS analyses provided a link between mass and collision cross sections (CCS) for specific PFAS families and are linked to compositional differences in molecular structure. In addition, CCS values provide additional confidence of annotating prioritized features in untargeted screening studies for potential environmental pollutants. Results from this study show that the IMS separation provides novel information to support traditional LC-MS PFAS analyses and will greatly benefit the evaluation of unknown pollutants in future environmental studies.

Gas chromatography and liquid chromatography coupled to mass spectrometry for the determination of fluorotelomer olefins, fluorotelomer alcohols, perfluoroalkyl sulfonamides and sulfonamido-ethanols in water.

In this work, the suitability of gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the multi-class determination of different families of neutral per- and polyfluoroalkyl substances (PFASs), such as fluorotelomer olefins (FTOs), alcohols (FTOHs) and fluorooctanesulfonamides (FOSAs) and sulfonamido-ethanols (FOSEs), was investigated and compared. Regarding GC-MS, the use of a semi-polar GC column (DB-624, 6%-cyanopropilphenyl 94%-dimethyl polysiloxane) allowed the adequate separation of all the compounds while chemical ionisation (CI) of positive ions as ionisation technique provided the best responses. Concerning UHPLC-MS/MS, atmospheric pressure chemical ionisation (APCI) and photoionisation (APPI) sources allowed the ionisation of all studied neutral PFASs, including FTOs for the first time. High vaporizer temperatures (450 °C) and acetonitrile/water mobile phase mixtures were required to favour the ionisation of FTOs, with adequate ionisation for FTOHs, FOSAs and FOSEs. The chromatographic separation, performed on a totally porous column (Luna C18), allowed the successful separation of the four families of neutral PFASs. After comparing the performance of the studied methods, the highest detectability was achieved using UHPLC-APCI-MS/MS and it was chosen in combination with a solid-phase extraction (SPE) procedure for the analysis of neutral PFASs in water samples. The whole method provided low limits of detection (0.003-6 µg L-1), good precision (RSD < 9%) and trueness (relative error < 10%). The methodology was applied to the analysis of river water samples and the presence of some neutral PFASs were detected (8:2 FTO) and quantified (4:2 FTOH and N-EtFOSA) at low concentration levels (ng L-1).

Residue Analysis and Risk Assessment of Oxathiapiprolin and Its Metabolites in Cucumbers under Field Conditions.

In this study, a rapid, sensitive, and selective method was established for the detection of oxathiapiprolin and the metabolite IN-E8S72, as well as its glucose conjugate IN-SXS67 in cucumber using modified QuEChERS procedure combined with HPLC-MS/MS. The LOQs for all compounds were 0.02 mg kg-1, and the average recoveries were 77.4-111.3% with RSDs of 1.0-8.5%. Under the optimized conditions, the established method was successfully used to determine field samples in dissipation and terminal residue studies. The dissipation study results showed that oxathiapiprolin dissipated rapidly in cucumber with half-lives of 2.4-4.0 days. On the basis of the terminal residue results, the risk assessment was conducted, and both the international estimated daily intake (IEDI) or national estimated daily intake (NEDI) of oxathiapiprolin were much less than 100% which indicate a low health risk to consumers. This work provides guidance for establishing MRL of oxathiapiprolin in China and is of great significance for evaluating its dietary risk in cucumber.

Seminal plasma metabolites mediate the associations of multiple environmental pollutants with semen quality in Chinese men.

Environmental exposure to arsenic, phthalate esters (PAEs) and perfluorinated compounds (PFCs) has been associated with human semen quality. However, the epidemiological "black-box" of these associations remains poorly uncovered. In this study, based on the association analysis between arsenic, PAE and PFC exposure and semen quality parameters (i.e., semen volume, sperm concentration, sperm count, progressive motility, total motility and normal morphology) in a Chinese male population, we explored the seminal plasma metabolic signatures that may mediate the exposure-outcome relations by using the meet-in-metabolite-analysis (MIMA) approach. As a result, a negative association was found between DMA and sperm concentration, whereas MEHP and PFHxS were positively associated with sperm count and concentration, respectively. Metabolomics analysis revealed that sixteen and twenty-two seminal plasma metabolites were related to sperm concentration and count, respectively, and they are mainly involved in fatty acid, lipid and amino acid metabolism. Moreover, it was further indicated that eicosatetraenoate, carnitines and DHA may impact the inverse association between DMA and sperm concentration, while eicosatetraenoate, carnitines, DHA, PGB2 and tocotrienol are possible mediators of the positive association between PFHxS and sperm concentration. As these metabolic biomarkers are relevant to antioxidation and fatty acid ß-oxidation, we suggest that redox balance and energy generation shifts in seminal plasma are involved in the association of human semen quality with environmental DMA and PFHxS exposure.

Theoretical studies of perfluorochemicals (PFCs) adsorption mechanism on the carbonaceous surface.

Understanding the mechanism by which perfluorochemicals (PFCs) adsorbed on carbonaceous surface is eventually important to the design and process optimization of effective PFCs removal technologies. In this study, the possible binding mechanism of six different PFCs onto carbonaceous surface was investigated by means of first principles quantum mechanical methods based on density functional theory (DFT) calculation and wave function analysis. The adsorption process fitted well with pseudo-second-order kinetic indicated that chemical bonding could not be underestimated. The results indicate that there were monolayer adsorption, electrostatic and hydrophobic interactions existed in PFCs adsorption process. DFT results suggested that the adsorption of PFCs on carbonaceous surface was one chemisorption process that accompanied by Van der Waals interactions. As there was different head functional groups in PFOS and PFOA, their adsorption capacity mainly controlled by the availability of active sites that was occupied by PFCs. The variation of chain length of PFBS and PFOS also take a certain responsible for different adsorption paths, due mainly to their hydrophobic effect. The obtained results from wave function and DFT analysis give in-depth understanding of PFCs adsorption on carbonaceous surface and help to their effectively removal.

Intermolecular Interaction in Methylene Halide (CH2F2, CH2Cl2, CH2Br2 and CH2I2) Dimers.

The intermolecular interaction in difluoromethane, dichloromethane, dibromomethane, and diiodomethane dimers has been investigated using high level quantum chemical methods. The potential energy curve of intermolecular interaction along the C⋯C bond distance obtained using the coupled-cluster theory with singles, doubles, and perturbative triples excitations CCSD(T) were compared with values given by the same method, but applying the local (LCCSD(T)) and the explicitly correlated (CCSD(T)-F12) approximations. The accuracy of other theoretical methods-Hartree-Fock (HF), second order Møller-Plesset perturbation (MP2), and dispersion corrected DFT theory-were also presented. In the case of MP2 level, the canonical and the local-correlation cases combined with the density-fitting technique (DF-LMP2)theories were considered, while for the dispersion-corrected DFT, the empirically-corrected BLYP-D and the M06-2Xexchange-correlation functionals were applied. In all cases, the aug-cc-pVTZ basis set was used, and the results were corrected for the basis set superposition error (BSSE) using the counterpoise method. For each molecular system, several dimer geometries were found, and their mutual orientations were compared with the nearest neighbor orientations obtained in recent neutron scattering studies. The nature of the intermolecular interaction energy was discussed.

Dynamic modeling of famoxadone and oxathiapiprolin residue on cucumber and Chinese cabbage based on tomato and lettuce archetypes.

We analyzed the uptake and distribution of two pesticides (famoxadone and oxathiapiprolin) in herbaceous vegetables (cucumber and tomato) and leafy vegetables (Chinese cabbage and lettuce) to test the viability of applying existing archetypes in the dynamic plant uptake model dynamiCROP to modeling pesticide residue in other crops. Using field data and modeling, we showed that tomato was an unsuitable match for cucumber (R2 of 0.5325-0.6862) though lettuce was a good fit for Chinese cabbage (R2 of 0.8649-0.8862). We then used our cucumber data to add this as a new crop species archetype in dynamiCROP; further tests proved the accuracy of this approach (R2 of 0.8097-0.9152). In addition, we analyzed the distribution, uptake, and translocation of the two pesticides in cucumber and Chinese cabbage, using the model to better understand the mechanisms of pesticide residues over time and evaluate potential human exposure to pesticide residues from consumption of these crops. The fractions of famoxadone and oxathiapiprolin eventually ingested by humans based on our field trials ranged from 10-4 to 10-3 kg intake kg applied-1; that is, per kilogram of pesticide applied, humans would eventually consume less than one gram.

Three-Dimensional NMR Spectroscopy of Fluorinated Pharmaceutical Solids under Ultrafast Magic Angle Spinning.

High-resolution solid-state analysis of multicomponent molecular systems, e.g., pharmaceutical formulations, is a great challenge. Solid-state nuclear magnetic resonance (ssNMR) spectroscopy plays a critical role in the characterization of solid dosage forms due to its capabilities of chemical identification, quantification, and structural elucidation at a molecular level. However, the low NMR sensitivity as well as the high spectral complexity and low drug loading of multicomponent products hinder an in-depth investigation of the active pharmaceutical ingredient (API) at the natural isotopic abundance. Herein, we developed two new three-dimensional (3D) ssNMR methods, including 1H-19F-1H and 19F-19F-1H correlations and successfully applied them to characterize a fluorinated drug molecule, aprepitant, and its commercial nanoparticulate formulation EMEND (Merck & Co, Inc., Kenilworth, NJ, USA). These 1H-detection methods utilize the significantly enhanced sensitivity and resolution of 1H and 19F afforded by 60 kHz ultrafast magic angle spinning (MAS) and enable the analysis of milligram samples. The 3D techniques simultaneously provide homonuclear 1H-1H and 19F-19F, and heteronuclear 1H-19F correlations of the crystalline aprepitant without interferences from other pharmaceutical components in the drug product. Moreover, our results demonstrate that 19F is a highly sensitive spin for probing molecular details of fluorinated drug substances in solid formulations, due to its high isotopic abundance, large gyromagnetic ratio, and absence of signal interference from pharmaceutical excipients, as well as for characterizing structural properties of a broad range of fluorine-containing materials.

Polybrominated Diphenyl Ethers (PBDEs) in Sediments of the Huron-Erie Corridor.

Polybrominated diphenyl ethers (PBDEs) were measured in 182 sediments from the Huron-Erie Corridor, North America. The median (5-95 percentile) Corridor ∑PBDE concentration was 1.03 ng/g dry wt (0.25-13.48 ng/g dry wt). Dry weight ∑PBDEs were elevated in U.S. waters of the Detroit River (US DR) and lowest in Canadian waters of Lake St. Clair (CA LSC). Sediment total organic carbon (TOC) explained some of the variation in ∑PBDEs, particularly in upstream waterbodies except for the Detroit River where local sources were apparent in the US DR and TOC-dilution occurred in CA DR. Canadian Federal Sediment Quality guidelines were exceeded at 19 stations, 14 occurring in the US DR. ∑Hazard Quotients (∑HQ) had a median (5-95 percentile) Corridor value of 0.46 (ND to 2.27). By strata, 43.2% of US DR stations had ∑HQ's greater than 1 while 21.3% of US SCR stations exceeded a value of 1.