Production of eco-friendly PHB-based bioplastics by Pseudomonas aeruginosa CWS2020 isolate using poultry (chicken feather) waste.

Nowadays, the accumulation of non-degradable plastics and other disposed wastes leads to environmental pollution across the world. The production of eco-friendly and cost-effective poly-ß-hydroxybutyrate (PHB) could be a better alternative to conventional petroleum-based plastics and prevent environmental pollution. Besides, the area in and around Namakkal, Tamil Nadu, India is well known for poultries, currently facing the number of environmental issues due to the accumulation of chicken feather waste. This study focused on the production of eco-friendly PHB by recycling poultry (chicken feather) waste as the substrate. The native PHB producers were screened from the chicken waste disposal site in Namakkal by Sudan black B staining method. Further, the potent bacterial isolate was identified as Pseudomonas aeruginosa (NCBI accession MF18889) by phenotypic and genotypic characteristics. The PHB production media with chicken feather waste was statistically optimized by response surface methodology. The dry weight of PHB produced under optimized condition (15.96 g/L chicken feather waste, 37 °C temperature, 19.8 g/L glucose and 6.85 pH) was found to be 4.8 g/L. Besides, PHB was characterized and confirmed by thin-layer chromatography, Fourier-transform infrared spectroscopy and Gas chromatography-mass spectrometry analysis. Thus, this study concludes that poultry waste could be a complex nitrogen source for improving the growth of PHB producers and substantially increasing the yield of PHB, and it will be an eco-friendly and low-cost production in bioprocess technology.

Production and characterization of biodegradable polyhydroxybutyrate by Micrococcus luteus isolated from marine environment.

Marine microorganisms are reported to produce polyhydroxybutyrate (PHB) that has wide range of medical and industrial applications with the advantage of biodegradability. PHBs are synthesized as an energy and carbon storage element under metabolic pressure. The scope of this work is enhancing PHB production using marine microbial isolate, Micrococcus luteus by selectively optimizing various growth conditions such as different media components and growth parameters that influence the cell growth and PHB production were sampled. Micrococcus luteus produced 7.54 g/L of PHB utilizing glucose as a carbon source and ammonium sulphate as a nitrogen source with maximum efficiency. The same optimized operational conditions were further employed in batch fermentation over a time span of 72 h. Interestingly higher cell dry weight of 21.52 g/L with PHB yield of 12.18 g/L and 56.59% polymer content was observed in batch fermentation studies at 64 h. The chemical nature of the extracted polymer was validated with physio-chemical experiments and was at par with the commercially available PHB. This study will spotlight M. luteus as a potential source for large-scale industrial production of PHB with reducing environmental pollutions.

Biocompatible PHB Production from Bacillus Species Under Submerged and Solid-State Fermentation and Extraction Through Different Downstream Processing.

Catastrophic global accumulation of non-biodegradable plastic has led to efforts for production of alternative eco-friendly biopolymer. Here, we attempted to produce a biodegradable, cytocompatible and eco-friendly polyhydroxy-butyrate (PHB) from a pigmented Bacillus sp. C1 (2013) (KF626477) through submerged (SmF) and solid-state fermentation (SSF). Under SmF and SSF, 0.60 g l-1 and 1.56 g l-1 of PHB with 0.497 g l-1 of yellow fluorescent pigment (YFP) was produced. Fourier transform infrared (FTIR) absorption bands at 1719-1720 cm-1 indicate the presence of C=O group of PHB. Nuclear magnetic resonance (NMR) exhibited the typical chemical shift patterns of PHB, and crystallinity was confirmed from X-ray diffraction (XRD). The melting temperature (Tm), degradation temperature (Td) and crystallinity (Xc) of extracted PHB were found to be 171 °C, 288 °C and 35%, respectively. FACS (Fluorescence-activated cell sorting) confirmed cytocompatibility of PHB at 400 µg ml-1 in mouse fibroblast line. Moreover, biodegradability and elevated cytocompatibility of the PHB produced through SSF make them highly potential biomaterials to be used as a drug delivery carrier in future.

A Preliminary Study on Metabolome Profiles of Buffalo Milk and Corresponding Mozzarella Cheese: Safeguarding the Authenticity and Traceability of Protected Status Buffalo Dairy Products.

The aim of this study is to combine advanced GC-MS and metabolite identification in a robust and repeatable technology platform to characterize the metabolome of buffalo milk and mozzarella cheese. The study utilized eleven dairies located in a protected designation of origin (PDO) region and nine dairies located in non-PDO region in Italy. Samples of raw milk (100 mL) and mozzarella cheese (100 g) were obtained from each dairy. A total of 185 metabolites were consistently detected in both milk and mozzarella cheese. The PLS-DA score plots clearly differentiated PDO and non-PDO milk and mozzarella samples. For milk samples, it was possible to divide metabolites into two classes according to region: those with lower concentrations in PDO samples (galactopyranoside, hydroxybuthyric acid, allose, citric acid) and those with lower concentrations in non-PDO samples (talopyranose, pantothenic acid, mannobiose, etc.,). The same was observed for mozzarella samples with the proportion of some metabolites (talopyranose, 2, 3-dihydroxypropyl icosanoate, etc.,) higher in PDO samples while others (tagatose, lactic acid dimer, ribitol, etc.,) higher in non-PDO samples. The findings establish the utility of GC-MS together with mass spectral libraries as a powerful technology platform to determine the authenticity, and create market protection, for "Mozzarella di Bufala Campana."

Six new monacolin analogs from red yeast rice.

Six novel monacolin analogs, monacolins V1-V6 (1-6), together with seven known ones (7-13), were isolated from the ethyl acetate extract of red yeast rice. Their structures and absolute configurations were determined by spectroscopic methods, especially 2D NMR (1H-1HCOSY, HSQC, HMBC, and NOESY/ROESY) and CD spectroscopic analyses as well as chemical derivation. Monacolins V2 (2) and V3 (3) represent the first examples of monacolins with 3-hydroxybutyrate substitute. The anti-inflammatory inhibitory activities against the lipopolysaccharide (LPS) induced NO production in BV-2 cells as well as antioxidant activities against rat liver microsomal lipid peroxidation were evaluated.

Harzianoic acids A and B, new natural scaffolds with inhibitory effects against hepatitis C virus.

Two new sesquiterpene-based analogues, namely harzianoic acids A (1) and B (2), were isolated from a sponge-associated fungus Trichoderma harzianum. Their structures were determined on the basis of the extensive spectroscopic analyses in association with the ECD data for the configurational assignment. Harzianoic acids A and B were structurally characterized as a sesquiterpene and a norsesquiterpene with a cyclobutane nucleus, which is uncommonly found from nature. Both compounds exhibited the inhibitory activity to reduce the HCV RNA levels with low cytotoxicity. The preliminary investigation of the mode of action revealed that the compounds blocked the entry step in the HCV life cycle, while the viral E1/E2 and the host cell CD81 were the potential target proteins.

Ultra-High-Performance Liquid Chromatography Tandem Mass Spectrometry Assay for Determination of Endogenous GHB and GHB-Glucuronide in Nails.

Background: The short chain fatty acid gamma-hydroxybutyric acid (GHB) is a precursor, and the metabolite of gamma-aminobutyric acid is commonly used as an illegal recreational drug of abuse. Methods: An ultra-high-performance liquid chromatography tandem mass spectrometry was developed and validated for endogenous GHB and its glucuronide in nails, to complement hair in forensic contexts for a retrospective detection of psychotropic drugs consumption. Results: GHB endogenous values for children and adolescents, adult females, and adult males in fingernails ranged from 0.3 to 3.0, 3.2, and 3.8 ng/mg, respectively, and toenails values ranged from 0.3 to 1.8, 2.0, and 2.4 ng/mg, respectively. In the three different groups, values of GHB in fingernails were statistically higher than those in toenails. GHB glucuronide could only be detected in finger nails with values ranging from 0.08 to 0.233, 0.252 and 0.243 in children and adolescents, adult females and adult males, respectively. Conclusions: The validated method was efficaciously applied to real finger and toe nails specimens from a population of males and females non GHB consumers. A preliminary cut-off of 5.0 ng/mg nail for endogenous GHB and 0.5 ng/mg for endogenous GHB-Gluc in the general population was proposed.

Assessment of poly(3-hydroxybutyrate) synthesis from a novel obligate alkaliphilic Bacillus marmarensis and generation of its composite scaffold via electrospinning.

In this study, poly(3-hydroxybutyrate) (PHB) production from a newly isolated obligate alkaliphilic Bacillus marmarensis DSM 21297 was investigated to evaluate the ability of obligate alkaliphilic strain to produce a biopolymer. Additionally, electrospun nanofibers from B. marmarensis PHB (Bm-PHB) were generated using Bm-PHB/polycaprolactone (PCL) blend to evaluate the applicability of Bm-PHB. According to the experimental results, the metabolic activity of B. marmarensis decreased the pH of the medium by generating H+ ions to initiate Bm-PHB production, which was achieved at pH below 9.0. Regarding medium components, the addition of MgSO4.7H2O and KH2PO4 to the medium containing 1% glucose enhanced the amount of Bm-PHB synthesis, and an approximately 60% increase in PHB concentration was obtained in the presence of mineral salts. Based on FTIR analysis, the chemical structures of Bm-PHB and commercial PHB were found to be highly similar. Additionally, the Tg and Tm values of Bm-PHB were determined to be 17.77 °C and 165.17 °C, respectively. Moreover, Bm-PHB/PCL composite scaffold was generated by electrospinning method that produced nanofibers between 150 and 400 nm in diameter, with an average of 250 nm. To our knowledge, this is the first report to produce PHB from an obligate alkaliphilic Bacillus strain and PHB scaffold.

Exploring multi potential uses of marine bacteria; an integrated approach for PHB production, PAHs and polyethylene biodegradation.

There are copious of bacteria exist in marine environment and it is very important to screen the potential microbes that has the ability to produce biopolymer polyhydroxybutyrate (PHB) as well as polycyclic aromatic hydrocarbons (PAHs) degradation and conventional plastic high density polyethylene (HDPE) biodegradation. Numerous studies have been investigated individually on either one of characteristic feature like PHB production, PAHs and high density polyethylene (HDPE) degradation, but not all together. Hence, in this study, we tried to screen potential marine microbes that have the ability to perform all three features. We have isolated 203 phenotyphicaly different colonies from 19 different sites (marine soil sediments, marine water and oil spilled marine water) which cover the north east to down south seashore regions of Tamilnadu, India. Of the 203 microbial isolates, the best PHB producing (Micrococcus luteus), PAHs degradation (Klebsiella pneumonia) and HDPE degradation (Brevibacillus borstelensis) microorganisms were identified through 16S rRNA sequencing. Analytical studies confirmed PHB production by fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (1H &13C NMR); PAHs degradation by high performance liquid chromatography (HPLC), confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM); HDPE degradation by CLSM, FT-IR and SEM which cover the spectroscopy studies on biological systems.

When a death apparently associated to sexual assault is instead a natural death due to idiopathic hypereosinophilic syndrome: The importance of gamma-hydroxybutyric acid analysis in vitreous humor.

We here report a case involving a 21-year-old female, found dead in a central square of a city in the south of Italy. Initial evidences and circumstances were suggestive of a death associated with a sexual assault. Two peripheral blood and two vitreous humor samples were collected for the purpose of gamma-hydroxybutyric acid (GHB) testing from the dead body at two different post-mortem intervals (PMIs): approximately 2 (t0) and 36 (t1) hours. The obtained results showed that, between t0 and t1, there was an increase of GHB concentrations in peripheral blood and vitreous humor of 66.3% and 8.1%, respectively. This case was the first evidence of GHB post mortem production in a dead body and not in vitro, showing that vitreous humor is less affected than peripheral blood in GHB post-mortem production. The value detected at t1 in peripheral blood (53.4µg/mL) exceeded the proposed cut-off and if interpreted alone would have led to erroneous conclusions. This was not the case of vitreous humor GHB, whose post-mortem increase was minimal and it allowed to exclude a GHB exposure. Only after a broad forensic investigation including a complete autopsy, serological, histological, toxicological and haematology analyses, a diagnosis of idiopathic hypereosinophilic syndrome, a myeloproliferative disorder characterized by persistent eosinophilia associated with damage to multiple organs, was made and the cause of death was due to a pulmonary eosinophilic vasculitis responsible for an acute respiratory failure.

Improving metabolite production in microbial co-cultures using a spatially constrained hydrogel.

Microbial co-cultures promise the development of more efficient bioproductions. However, the design of obligate mutualisms is complicated when using organisms that possess differing growth rates or incompatible media requirements. In this work, we investigate sucrose production by cscB Synechococcus elongatus PCC 7942 within a polyacrylate hydrogel matrix. This system secretes sucrose only when the hydrogel is spatially constrained, demonstrating a new utilization of hydrogel swelling pressure to control the osmotic strength of a microbial microenvironment. The sucrose produced via the constrained microbial hydrogel is used to grow the diazotrophic organism, Azotobacter vinelandii, in a mutually dependent fashion. The growth of this hydrogel-based coculture has several advantages over batch cultures, including better growth over a longer period of time and decreased salt stress on A. vinelandii. Biotechnol. Bioeng. 2017;114: 1195-1200. © 2016 Wiley Periodicals, Inc.

CRISPRi engineering E. coli for morphology diversification.

Microbial morphology engineering has recently become interesting for biotechnology. Genes ftsZ and mreB encoding proteins of bacterial fission ring and skeletons, respectively, are essential for cell growth, they both are the most important genes keeping the bacterial shapes including the cell length and width, respectively. Clustered regularly interspaced short palindromic repeats interference, abbreviated as CRISPRi, was for the first time used in this study to regulate expression intensities of ftsZ or/and mreB in E. coli. Five sgRNAs associated with CRISPRi were designed and synthesized, respectively, to target five various locations on genes ftsZ or mreB encoded in the E. coli chromosome, resulting in various reduced expression levels of ftsZ or/and mreB, respectively, forming elongated or/and fatter cells. Repressions on gene expressions of ftsZ or/and mreB could be further intensified by combining various sgRNAs together. It was found that the stronger the repression on genes ftsZ or/and mreB, the longer the E. coli fibers, and the larger the E. coli cells. Combined repressions on expressions of ftsZ and mreB generated long and larger E. coli with diverse morphologies including various sizes of gourds, bars, coccus, spindles, multi-angles and ellipsoids. In all cases, accumulations of intracellular biopolyester polyhydroxybutyrate (PHB) were in direct proportional to the intracellular volumes, ranging from 40% to 80% PHB in bacterial cell dry weights, depending on the cell volumes increases by the above CRISPRi applications.

Systematic engineering of TCA cycle for optimal production of a four-carbon platform chemical 4-hydroxybutyric acid in Escherichia coli.

To address climate change and environmental problems, it is becoming increasingly important to establish biorefineries for the production of chemicals from renewable non-food biomass. Here we report the development of Escherichia coli strains capable of overproducing a four-carbon platform chemical 4-hybroxybutyric acid (4-HB). Because 4-HB production is significantly affected by aeration level, genome-scale metabolic model-based engineering strategies were designed under aerobic and microaerobic conditions with emphasis on oxidative/reductive TCA branches and glyoxylate shunt. Several different metabolic engineering strategies were employed to develop strains suitable for fermentation both under aerobic and microaerobic conditions. It was found that microaerobic condition was more efficient than aerobic condition in achieving higher titer and productivity of 4-HB. The final engineered strain produced 103.4g/L of 4-HB by microaerobic fed-batch fermentation using glycerol. The aeration-dependent optimization strategy of TCA cycle will be useful for developing microbial strains producing other reduced derivative chemicals of TCA cycle intermediates.

Microwave-assisted on-spot derivatization for gas chromatography-mass spectrometry based determination of polar low molecular weight compounds in dried blood spots.

Dried blood spot (DBS) sampling and analysis is increasingly being applied in bioanalysis. Although the use of DBS has many advantages, it is also associated with some challenges. E.g. given the limited amount of available material, highly sensitive detection techniques are often required to attain sufficient sensitivity. In gas chromatography coupled to mass spectrometry (GC-MS), derivatization can be helpful to achieve adequate sensitivity. Because this additional sample preparation step is considered as time-consuming, we introduce a new derivatization procedure, i.e. "microwave-assisted on-spot derivatization", to minimize sample preparation of DBS. In this approach the derivatization reagents are directly applied onto the DBS and derivatization takes place in a microwave instead of via conventional heating. In this manuscript we evaluated the applicability of this new concept of derivatization for the determination of two polar low molecular weight molecules, gamma-hydroxybutyric acid (GHB) and gabapentin, in DBS using a standard GC-MS configuration. The method was successfully validated for both compounds, with imprecision and bias values within acceptance criteria (<20% at LLOQ, <15% at 3 other QC levels). Calibration lines were linear over the 10-100µg/mL and 1-30µg/mL range for GHB and gabapentin, respectively. Stability studies revealed no significant decrease of gabapentin and GHB in DBS upon storage at room temperature for at least 84 days. Furthermore, DBS-specific parameters, including hematocrit and volume spotted, were evaluated. As demonstrated by the analysis of GHB and gabapentin positive samples, "microwave-assisted on-spot derivatization" proved to be reliable, fast and applicable in routine toxicology. Moreover, other polar low molecular weight compounds of interest in clinical and/or forensic toxicology, including vigabatrin, beta-hydroxybutyric acid, propylene glycol, diethylene glycol, 1,4-butanediol and 1,2-butanediol, can also be detected using this method.

An efficient method for the application of PHA-poor solvents to extract polyhydroxybutyrate from Cupriavidus necator.

There are many published studies presenting ethanol and acetone as PHAs-poor solvents, where these two solvents are shown to dissolve <2% (w/v) of PHAs at low temperatures. In this study, the suitability of ethanol and acetone for the recovery of PHB at different temperatures (from room temperature to near boiling point) in Cupriavidus necator was investigated. Experiments were performed using response surface methodology to examine the effects of different temperatures and heating incubation times on recovery percentage using the two solvents. The highest recovery percentage (92.3%) and product purity (up to 99%) were obtained with ethanol-assisted extraction at 76°C for 32 min of incubation time. Under these conditions the extracted PHB exhibited a molecular mass of 1.2 × 106 . The present strategy showed that at temperatures near its boiling point, ethanol, as a nonhalogenated solvent, represents a good alternative to halogenated solvents, like chloroform, when PHB recovery is concerned. DSC analysis showed good thermal properties for ethanol- and acetone-extracted biopolymers. GC and 1 H NMR analysis confirmed the extracted biopolymer to be polyhydroxybutyrate of good purity. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1480-1486, 2016.

Intracellular delivery of peptide cargos using polyhydroxybutyrate based biodegradable nanoparticles: Studies on antitumor efficacy of BCL-2 converting peptide, NuBCP-9.

Faster biodegradation, immunogenicity and lack of cell penetrative capabilities are hurdles in development of peptidyl drugs for cancer therapy. Polymeric carriers can be used to overcome these problems. The present study is focused on the use of polyhydroxybutyrate as a potential nanovehicle for the delivery of anticancer peptides. PHB (72kDa) was produced by thermal treatment of high molecular weight PHB (300kDa) under melt conditions and then conjugated with PEG (4kDa) by Steglich esterification reaction. Anticancer peptide NuBCP-9 (FSRSLHSLL) encapsulated PHB(72K)-PEG(4K) NPs were prepared by double emulsion solvent evaporation method. PHB(72K)-PEG(4K) NPs showed encapsulation efficiency of 61% and exhibited sustained release of peptide over a period of 26days at physiological pH. NuBCP-9 loaded PHB(72K)-PEG(4K) NPs showed an IC50 value of 2.2µM & 1.6µM in MCF-7 cells in 48h and 72h respectively. Confocal laser microscopy confirmed efficient cellular uptake and induction of apoptosis by peptide loaded NPs in a time dependent manner. In vivo intraperitonial administration of 20mg/kg NuBCP-9/NPs twice a week for three weeks triggered 90% tumor regression in Ehrlich syngeneic mouse model. Our results illustrated the potential of PHB(72K)-PEG(4K) based nanoformulation as a tool for targeting intracellular proteins.

Cyanobacterial Polyhydroxybutyrate (PHB): Screening, Optimization and Characterization.

In modern life petroleum-based plastic has become indispensable due to its frequent use as an easily available and a low cost packaging and moulding material. However, its rapidly growing use is causing aquatic and terrestrial pollution. Under these circumstances, research and development for biodegradable plastic (bioplastics) is inevitable. Polyhydroxybutyrate (PHB), a type of microbial polyester that accumulates as a carbon/energy storage material in various microorganisms can be a good alternative. In this study, 23 cyanobacterial strains (15 heterocystous and 8 non-heterocystous) were screened for PHB production. The highest PHB (6.44% w/w of dry cells) was detected in Nostoc muscorum NCCU- 442 and the lowest in Spirulina platensis NCCU-S5 (0.51% w/w of dry cells), whereas no PHB was found in Cylindrospermum sp., Oscillatoria sp. and Plectonema sp. Presence of PHB granules in Nostoc muscorum NCCU- 442 was confirmed microscopically with Sudan black B and Nile red A staining. Pretreatment of biomass with methanol: acetone: water: dimethylformamide [40: 40: 18: 2 (MAD-I)] with 2 h magnetic bar stirring followed by 30 h continuous chloroform soxhlet extraction acted as optimal extraction conditions. Optimized physicochemical conditions viz. 7.5 pH, 30°C temperature, 10:14 h light:dark periods with 0.4% glucose (as additional carbon source), 1.0 gl-1 sodium chloride and phosphorus deficiency yielded 26.37% PHB on 7th day instead of 21st day. Using FTIR, 1H NMR and GC-MS, extracted polymer was identified as PHB. Thermal properties (melting temperature, decomposition temperatures etc.) of the extracted polymer were determined by TGA and DSC. Further, the polymer showed good tensile strength and young's modulus with a low extension to break ratio comparable to petrochemical plastic. Biodegradability potential tested as weight loss percentage showed efficient degradation (24.58%) of PHB within 60 days by mixed microbial culture in comparison to petrochemical plastic.

Calorespirometric feeding control enhances bioproduction from toxic feedstocks-Demonstration for biopolymer production out of methanol.

The sustainable production of fuels and industrial bulk chemicals by microorganisms in biotechnological processes is promising but still facing various challenges. In particular, toxic substrates require an efficient process control strategy. Methanol, as an example, has the potential to become a major future feedstock due to its availability from fossil and renewable resources. However, besides being toxic, methanol is highly volatile. To optimize its dosage during microbial cultivations, an innovative, predictive process control strategy based on calorespirometry, i.e., simultaneous measurements of heat and CO2 emission rates, was developed. This rarely used technique allows an online-estimation of growth parameters such as the specific growth rate and substrate consumption rate as well as a detection of shifts in microbial metabolism thus enabling an adapted feeding for different phases of growth. The calorespirometric control strategy is demonstrated exemplarily for growth of the methylotrophic bacterium Methylobacterium extorquens on methanol and compared to alternative control strategies. Applying the new approach, the methanol concentration could be maintained far below a critical limit, while increased growth rates of M. extorquens and higher final contents of the biopolymer polyhydroxybutyrate were obtained. Biotechnol. Bioeng. 2016;113: 2113-2121. © 2016 Wiley Periodicals, Inc.