Real-Time Particle Emission Monitoring for the Non-Invasive Prediction of Lung Deposition via a Dry Powder Inhaler.

Although inhalation therapy represents a promising drug delivery route for the treatment of respiratory diseases, the real-time evaluation of lung drug deposition remains an area yet to be fully explored. To evaluate the utility of the photo reflection method (PRM) as a real-time non-invasive monitoring of pulmonary drug delivery, the relationship between particle emission signals measured by the PRM and in vitro inhalation performance was evaluated in this study. Symbicort® Turbuhaler® was used as a model dry powder inhaler. In vitro aerodynamic particle deposition was evaluated using a twin-stage liquid impinger (TSLI). Four different inhalation patterns were defined based on the slope of increased flow rate (4.9-9.8 L/s2) and peak flow rate (30 L/min and 60 L/min). The inhalation flow rate and particle emission profile were measured using an inhalation flow meter and a PRM drug release detector, respectively. The inhalation performance was characterized by output efficiency (OE, %) and stage 2 deposition of TSLI (an index of the deagglomerating efficiency, St2, %). The OE × St2 is defined as the amount delivered to the lungs. The particle emissions generated by four different inhalation patterns were completed within 0.4 s after the start of inhalation, and were observed as a sharper and larger peak under conditions of a higher flow increase rate. These were significantly correlated between the OE or OE × St2 and the photo reflection signal (p < 0.001). The particle emission signal by PRM could be a useful non-invasive real-time monitoring tool for dry powder inhalers.

Developing Dry Powder Inhaler Formulations.

This section aims to provide a concise and contemporary technical perspective and reference resource covering dry powder inhaler (DPI) formulations. While DPI products are currently the leading inhaled products in terms of sales value, a number of confounding perspectives are presented to illustrate why they are considered surprisingly, and often frustratingly, poorly understood on a fundamental scientific level, and most challenging to design from first principles. At the core of this issue is the immense complexity of fine cohesive powder systems. This review emphasizes that the difficulty of successful DPI product development should not be underestimated and is best achieved with a well-coordinated team who respect the challenges and who work in parallel on device and formulation and with an appreciation of the handling environment faced by the patient. The general different DPI formulation types, which have evolved to address the challenges of aerosolizing fine cohesive drug-containing particles to create consistent and effective DPI products, are described. This section reviews the range of particle engineering processes that may produce micron-sized drug-containing particles and their subsequent assembly as either carrier-based or carrier-free compositions. The creation of such formulations is then discussed in the context of the material, bulk, interfacial and ultimately drug-delivery properties that are considered to affect formulation performance. A brief conclusion then considers the future DPI product choices, notably the issue of technology versus affordability in the evolving inhaler market.

Design of dry powder inhalers to improve patient outcomes: it's not just about the device.

INTRODUCTION: Up to 50% of asthma/COPD patients make critical errors in dose preparation and dose inhalation with current marketed DPIs which negatively impact clinical outcomes. Others fail to adhere to their chronic treatment regimen. AREAS COVERED: For this review, we describe how a human-factors approach to design of a dry powder inhaler can be used to improve usability, proficiency, and functionality of DPIs, while effectively mitigating critical errors associated with DPIs. The review highlights the critical importance of utilizing improved formulations with monomodal aerodynamic particle size distributions to reduce variability associated with oropharyngeal filtering of particles, flow rate dependence, and co-formulation effects. EXPERT OPINION: Much of the variability in dose delivery with DPIs is associated with limitations of the bimodal APSDs inherent in current lactose blend formulations. Evidence supports that improved lung targeting and dose consistency can be achieved with drug-device combination products comprising spray-dried powders. Unfortunately, no data exists to assess whether these advances observed in in vitro and in vivo dose delivery studies will translate into improved clinical outcomes. Given the significant percentage of patients that receive suboptimal drug delivery with current DPIs it would behoove the industry to assess the efficacy of new approaches.

Suboptimal peak inspiratory flow rate: a noticeable risk factor for inhaler concordance in patients with chronic airway diseases.

BACKGROUND: Inhaler concordance and the peak inspiratory flow rate (PIFR) are important determinants of treatment effects in patients with chronic airway diseases. Adequate PIFR is required for driving aerosol medication into the lower respiratory tract. However, the relationship between them has not been discussed previously. This study aimed to describe the characteristics of inhaler concordance and PIFR in Chinese patients with chronic airway diseases and discuss the associated variables and the relationship between them. METHODS: In this single-centre, observational study, a total of 680 patients with chronic airway diseases were enrolled from July 2021 to April 2023. We collected data on the socio-demographic and clinical variables of inhaler concordance using the test of adherence to inhalers (TAI) and PIFR. Multivariate logistic regression was conducted to examine variables related to inhaler concordance and PIFR. RESULTS: A total of 49.4% of patients had low concordance. Patients with chronic obstructive pulmonary disease (COPD) were more concordant than patients with asthma (mean TAI score: 43.60 vs 41.20; p<0.01), while there was no difference in concordance between the asthma-COPD overlap group and the asthma or COPD group. Suboptimal PIFR (adjusted OR, 1.61; 95% CI 1.04 to 2.51) increased the risk of poor concordance among all patients, while triple therapy (adjusted OR, 0.60; 95% CI 0.35 to 0.86) reduced the risk. A total of 54.9% of patients had suboptimal PIFR. Older age, lower educational level, use of dry powder inhalers and lower forced expiratory volume in 1 s % predicted were significantly correlated with insufficient PIFR. Subgroup analysis revealed a greater proportion of patients with insufficient PIFR during exacerbation than during the stable phase (61.7% vs 43.5%, p<0.001). CONCLUSION: Inhaler concordance was low, and suboptimal PIFR was a risk factor for poor concordance among Chinese patients with chronic airway diseases. In addition, current inhalation devices may not be suitable, and PIFR reassessment should be considered for patients with COPD during exacerbation. TRIAL REGISTRATION NUMBER: The study was registered in chictr.org.cn (ChiCTR2100052527) on 31 October 2021.

Pharmacokinetic Models for Inhaled Fluticasone Propionate and Salmeterol Xinafoate to Quantify Batch-to-Batch Variability.

Advair Diskus is an essential treatment for asthma and chronic obstructive pulmonary disease. It is a dry powder inhaler with a combination of fluticasone propionate (FP) and salmeterol xinafoate (SX). However, the pharmacokinetics (PK) batch-to-batch variability of the reference-listed drug (RLD) hindered its generic product development. This work developed the PK models for inhaled FP and SX that could represent potential batch variability. Two batches each of the reference and the test product (R1, R2, T1, T2) of Advair Diskus (100 µg FP/50 µg SX inhalation) were administered to 60 healthy subjects in a 4-period, 4-sequence crossover study. The failure of the bioequivalence (BE) between R1 and R2 confirmed the high between-batch variability of the RLD. Non-linear mixed effect modeling was used to estimate the population mean PK parameters for each batch. For FP, a 2-compartment model with a sequential dual zero-order absorption best described the PK profile. For SX, a 2-compartment model with a first-order absorption model best fit the data. Both models were able to capture the plasma concentration, the maximum concentration, and the total exposure (AUCinf) adequately for each batch, which could be used to simulate the BE study in the future. In vitro properties were also measured for each batch, and the batch with a higher fraction of the fine particle (diameter < 1 µm, < 2 µm) had a higher AUCinf. This positive correlation for both FP and SX could potentially assist the batch selection for the PK BE study.

Nanoscale colocalized thermal and chemical mapping of pharmaceutical powder aerosols.

Inhalation of pharmaceutical aerosol formulations is widely used to treat respiratory diseases. Spatially resolved thermal characterization offers promise for better understanding drug release rates from particles; however, this has been an analytical challenge due to the small particle size (from a few micrometers down to nanometers) and the complex composition of the formulations. Here, we employ nano-thermal analysis (nanoTA) to probe the nanothermal domain of a pharmaceutical aerosol formulation containing a mixture of fluticasone propionate (FP), salmeterol xinafoate (SX), and excipient lactose, which is widely used to treat asthma and chronic obstructive pulmonary disease (COPD). Furthermore, atomic force microscopy-infrared spectroscopy (AFM-IR) and AFM force measurements are performed to provide nanochemical and nanomechanical information to complement the nanothermal data. The colocalized thermal and chemical mapping clearly reveals the surface heterogeneity of the drugs in the aerosol particles and demonstrates the contribution of the surface chemical composition to the variation in the thermal properties of the particles. We present a powerful analytical approach for in-depth characterization of thermal/chemical/morphological properties of dry powder inhaler particles at micro- and nanometer scales. This approach can be used to facilitate the comparison between generics and reference inhalation products and further the development of high-performance pharmaceutical formulations.

Clinical Burden of Chronic Obstructive Pulmonary Disease in Patients with Suboptimal Peak Inspiratory Flow.

Introduction: Many patients with chronic obstructive pulmonary disease (COPD) may derive inadequate benefit from dry powder inhalers (DPIs) because of suboptimal peak inspiratory flow (sPIF). Objectives: To assess the clinical burden of COPD by characterizing the clinical characteristics of participants with sPIF against medium-low resistance DPIs versus those with optimal PIF (oPIF) from two phase 3 clinical trials. Methods: Baseline data were collected from two randomized, controlled, phase 3 trials (NCT03095456; NCT02518139) in participants with moderate-to-severe COPD. oPIF (60 L/min) against the medium-low resistance DPIs was used as the threshold for defining the PIF subgroups (<60 L/min (sPIF) vs ≥60 L/min (oPIF)). Results: Most participants included in this analysis were White (92%) and male (63%); the mean (range) age was 65 (43-87) years. Participants with sPIF had significantly greater dyspnea than those with oPIF as measured using the modified Medical Research Council scoring (mean (95% CI): 2.1 (2.0-2.2) vs 1.6 (1.4-1.7); P < 0.001) and baseline dyspnea index (mean (95% CI): 5.1 (4.9-5.4) vs 6.1 (5.8-6.3); P < 0.001). Based on COPD Assessment Test scores, participants with sPIF had a higher COPD symptom burden than those with oPIF (mean (95% CI): 21.5 (19.7-23.3) vs 19.5 (18.6-20.4); P = 0.05). Conclusion: In these trials, participants with COPD who had sPIF against the medium-low resistance DPIs had more dyspnea and worse health status than those with oPIF. These results demonstrate that sPIF is associated with a higher clinical burden as measured by patient-reported outcomes.

Development of a dry powder insufflation device with application in in vitro cell-based assays in the context of respiratory delivery.

Research on pharmaceutical dry powders has been increasing worldwide, along with increased therapeutic strategies for an application through the pulmonary or the nasal routes. In vitro methodologies and tests that mimic the respiratory environment and the process of inhalation itself are, thus, essential. The literature frequently reports cell-based in vitro assays that involve testing the dry powders in suspension. This experimental setting is not adequate, as both the lung and the nasal cavity are devoid of abundant liquid. However, devices that permit powder insufflation over cells in culture are either scarce or technically complex and expensive, which is not feasible in early stages of research. In this context, this work proposes the development of a device that allows the delivery of dry powders onto cell surfaces, thus simulating inhalation more appropriately. Subsequently, a quartz crystal microbalance (QCM) was used to establish a technique enabling the determination of dry powder deposition profiles. Additionally, the determination of the viability of respiratory cells (A549) after the insufflation of a dry powder using the developed device was performed. In all, a prototype for dry powder insufflation was designed and developed, using 3D printing methods for its production. It allowed the homogenous dispersion of the insufflated powders over a petri dish and a QCM crystal, and a more detailed study on how dry powders disperse over the supports. The device, already protected by a patent, still requires further improvement, especially regarding the method for powder weighing and the efficiency of the insufflation process, which is being addressed. The impact of insufflation of air and of locust bean gum (LBG)-based microparticles revealed absence of cytotoxic effect, as cell viability roughly above 70 % was always determined.

Preclinical evaluation of novel synthesised nanoparticles based on tyrosine poly(ester amide) for improved targeted pulmonary delivery.

Fixed dose combinations (FDCs) incorporating two or three medicines in a single inhaler have been created to enhance patient compliance and hence clinical outcomes. However, the development of dry powder inhalers (DPIs), particularly for FDCs, faces challenges pertinent to formulation uniformity and reproducibility. Therefore, this project aimed to employ nanotechnology to develop a FDC of DPIs for market-leading medicines-fluticasone propionate (FP) and salmeterol xinafoate (SAL)-for asthma management. Nanoaggregates were prepared using a novel biocompatible and biodegradable poly(ester amide) based on the amino acid tyrosine, utilising a one-step interfacial polymerisation process. The produced tyrosine poly (ester amide) drug-loaded nanoparticles were evaluated for content uniformity, PSA, FTIR, TEM, DSC, XRD and aerodynamic performance (in vitro and in vivo). The optimised formulation demonstrated high entrapment efficiency- > 90%. The aerodynamic performance in terms of the emitted dose, fine particle fraction and respirable dose was superior to the carrier-based marketed product. In-vivo studies showed that FP (above the marketed formulation) and SAL reached the lungs of mice in a reproducible manner. These results highlight the superiority of novel FDC FP/SAL nanoparticles prepared via a one-step process, which can be used as a cost-effective and efficient method to alleviate the burden of asthma.

Advances in Respiratory Medicine-Aims and Scopes Update.

Advances in Respiratory Medicine, which has been published by MDPI since 2022, serves as a platform for hosting pneumological studies [...].

Critical attributes of fine excipient materials in carrier-based dry powder inhalation formulations: The particle shape and surface properties.

The potential of fine excipient materials to improve the aerodynamic performance of carrier-based dry powder inhalation (DPI) formulations is well acknowledged but not fully elucidated. To improve the understanding of this potential, we studied two fine excipient materials: micronized lactose particles and silica microspheres. Inhalation formulations, each composed of a coarse lactose carrier, one of the two fine excipient materials (0.0-15.0 % w/w), and a spray-dried drug (fluticasone propionate) material (1.5 % w/w) were prepared. The physical structure, the flow behavior, the aerosolization behavior, and the aerodynamic performance of the formulations were studied. The two fine excipient materials similarly occupied carrier surface macropores. However, only the micronized lactose particles formed agglomerates and appeared to increase the tensile strength of the formulations. At 2.5 % w/w, the two fine excipient materials similarly improved drug dispersibility, whereas at higher concentrations, the micronized lactose material was more beneficial than the silica microspheres. The findings suggest that fine excipient materials improve drug dispersibility from carrier-based DPI formulations at low concentrations by filling carrier surface macropores and at high concentrations by forming agglomerates and/or enforcing fluidization. The study emphasizes critical attributes of fine excipient materials in carrier-based DPI formulations.

Synergistic combination of antimicrobial peptide and isoniazid as inhalable dry powder formulation against multi-drug resistant tuberculosis.

Multidrug-resistant tuberculosis (MDR-TB) has posed a serious threat to global public health, and antimicrobial peptides (AMPs) have emerged to be promising candidates to tackle this deadly infectious disease. Previous study has suggested that two AMPs, namely D-LAK120-A and D-LAK120-HP13, can potentiate the effect of isoniazid (INH) against mycobacteria. In this study, the strategy of combining INH and D-LAK peptide as a dry powder formulation for inhalation was explored. The antibacterial effect of INH and D-LAK combination was first evaluated on three MDR clinical isolates of Mycobacteria tuberculosis (Mtb). The minimum inhibitory concentrations (MICs) and fractional inhibitory concentration indexes (FICIs) were determined. The combination was synergistic against Mtb with FICIs ranged from 0.25 to 0.38. The INH and D-LAK peptide at 2:1 mole ratio (equivalent to 1: 10 mass ratio) was identified to be optimal. This ratio was adopted for the preparation of dry powder formulation for pulmonary delivery, with mannitol used as bulking excipient. Spherical particles with mass median aerodynamic diameter (MMAD) of around 5 µm were produced by spray drying. The aerosol performance of the spray dried powder was moderate, as evaluated by the Next Generation Impactor (NGI), with emitted fraction and fine particle fraction of above 70 % and 45 %, respectively. The circular dichroism spectra revealed that both D-LAK peptides retained their secondary structure after spray drying, and the antibacterial effect of the combination against the MDR Mtb clinical isolates was successfully preserved. The combination was found to be effective against MDR Mtb isolates with KatG or InhA mutations. Overall, the synergistic combination of INH with D-LAK peptide formulated as inhaled dry powder offers a new therapeutic approach against MDR-TB.

Triple combination dry powder formulation of pretomanid, moxifloxacin, and pyrazinamide for treatment of multidrug-resistant tuberculosis.

Both latent and multidrug-resistant tuberculosis (TB) have been causing significant concern worldwide. A novel drug, pretomanid (PA-824), has shown a potent bactericidal effect against both active and latent forms of Mycobacterium tuberculosis (MTb) and a synergistic effect when combined with pyrazinamide and moxifloxacin. This study aimed to develop triple combination spray dried inhalable formulations composed of antitubercular drugs, pretomanid, moxifloxacin, and pyrazinamide (1:2:8 w/w/w), alone (PaMP) and in combination with an aerosolization enhancer, L-leucine (20 % w/w, PaMPL). The formulation PaMPL consisted of hollow, spherical, dimpled particles (<5 µm) and showed good aerosolization behaviour with a fine particle fraction of 70 %. Solid-state characterization of formulations with and without L-leucine confirmed the amorphous nature of moxifloxacin and pretomanid and the crystalline nature of pyrazinamide with polymorphic transformation after the spray drying process. Further, the X-ray photoelectron spectroscopic analysis revealed the predominant surface composition of L-leucine on PaMPL dry powder particles. The dose-response cytotoxicity results showed pyrazinamide and moxifloxacin were non-toxic in both A549 and Calu-3 cell lines up to 150 µg/mL. However, the cell viability gradually decreased to 50 % when the pretomanid concentration increased to 150 µg/mL. The in vitro efficacy studies demonstrated that the triple combination formulation had more prominent antibacterial activity with a minimum inhibitory concentration (MIC) of 1 µg/mL against the MTb H37Rv strain as compared to individual drugs. In conclusion, the triple combination of pretomanid, moxifloxacin, and pyrazinamide as an inhalable dry powder formulation will potentially improve treatment efficacy with fewer systemic side effects in patients suffering from latent and multidrug-resistant TB.

Design, development, and technical considerations for dry powder inhaler devices.

The dry powder inhaler (DPI) stands out as a highly patient-friendly and effective pulmonary formulation, surpassing traditional and other pulmonary dosage forms in certain disease conditions. The development of DPI products, however, presents more complexities than that of other dosage forms, particularly in device design and the integration of the drug formulation. This review focuses on the capabilities of DPI devices in pulmonary drug delivery, with a special emphasis on device design and formulation development. It also discusses into the principles of deep lung particle deposition and device engineering, and provides a current overview of the market for DPI devices. Furthermore, the review highlights the use of computational fluid dynamics (CFD) in DPI product design and discusses the regulatory environment surrounding these devices.

Development of Aerosol Dry Powder Chemotherapeutic-Loaded Microparticles for the Treatment of Lung Cancer.

Lung cancer is the leading cause of cancer-related deaths worldwide, resulting in the highest mortality rates among both men and women with respect to all other types of cancer. Difficulties in treating lung cancer arise from late-stage diagnoses and tumor heterogeneity and current treatment involves a combination of chemotherapeutics, surgery, and radiation. Chemotherapeutics administered systemically can lead to undesirable side effects and severe off-site toxicity. For example, chronic administration of the chemotherapeutic doxorubicin (DOX) leads to cardiotoxicity, thereby limiting its long-term use. Systemic administration of the highly lipophilic molecule paclitaxel (PTX) is hindered by its water solubility, necessitating the use of solubilizing agents, which can induce side effects. Thus, in this investigation, formulations consisting of spray-dried microparticles (MP) containing DOX and PTX were produced to be administered as dry powder aerosols directly to the lungs. Acetalated dextran (Ac-Dex) was used as the polymer in these formulations, as it is a biocompatible and biodegradable polymer that exhibits pH-responsive degradation. Solid-state characterization revealed that DOX and PTX remained in solubility favoring amorphous states in the MP formulations and that both drugs remained thermally stable throughout the spray drying process. In vitro release studies demonstrated the pH sensitivity of the formulations due to the use of Ac-Dex, as well as the release of both therapeutics over the course of at least 48 h. In vitro aerosol dispersion studies demonstrated that both formulations exhibited suitable aerosol dispersion properties for deep lung delivery.

Using Dry Dispersion Laser Diffraction to Assess Dispersibility in Spheronized Agglomerate Formulations.

In this study, dry dispersion laser diffraction was used to study the dispersibility of spheronized agglomerate formulations and identify geometric particle size metrics that correlated well with aerodynamic particle size distribution (APSD). Eleven unique batches of agglomerates were prepared for both laser diffraction and cascade impaction testing. Correlations between the particle size distribution (PSD) and aerodynamic particle size distribution (APSD) metrics for the eleven agglomerate batches were determined in a semi-empirical manner. The strongest correlation between APSD and PSD was observed between the impactor-sized mass (%ISM) and the cumulative PSD fraction <14.5 µm. The strongest correlation with fine particle fraction (FPF) was observed with the cumulative PSD fraction <0.99 micron (R-squared = 0.974). In contrast to the other APSD metrics, good correlations were not found between the mass median aerodynamic diameter (MMAD) and the cumulative PSD fractions. Overall, the implementation of laser diffraction as a surrogate for cascade impaction has the potential to streamline product development. Laser diffraction measurements offer savings in labor and turnaround time compared to cascade impaction.

Comparative study of the inhalation parameters of COPD patients through NEXThaler® and Ellipta® dry powder inhalers.

The deposition of dry powder aerosol drugs depends on the inhalation parameters of the patients through the inhaler. These data are not directly measured in clinical practice. Their prediction based on the routinely measured spirometric data could help in choosing the appropriate device and optimizing the therapy. The aim of this study was to perform inhalation experiments to find correlations between inhalation parameters of COPD patients through two DPI devices and their native spirometric data, gender, age and disease severity. Another goal was to establish relationships between peak inspiratory flows through NEXThaler® and Ellipta® inhalers and their statistical determinants. Breathing parameters of 113 COPD patients were measured by normal spirometry and while inhaling through the two DPIs. Statistical analysis of the measured data was performed. The average values of peak inspiratory flow through the devices (PIFdev) were 68.4 L/min and 78.0 L/min for NEXThaler® and Ellipta®, respectively. PIFdev values were significantly higher for males than for females, but differences upon age, BMI and disease severity group were not significant. PIFdev values correlated best with their native spirometric counterparts (PIF) and linear relationships between them were revealed. Current results may be used in the future to predict the success of inhalation of COPD patients through DPI devices, which may help in the inhaler choice. By choosing the appropriate device-drug pair for each patient the lung dose can be increased and the efficiency of the therapy improved. Further results of the clinical study will be the subject of a next publication.

Intranasal delivery of thin-film freeze-dried monoclonal antibodies using a powder nasal spray system.

Monoclonal antibodies (mAbs) administered intranasally as dry powders can be potentially applied for the treatment or pre-exposure prevention of viral infections in the upper respiratory tract. However, a method to transform the mAbs from liquid to dry powders suitable for intranasal administration and a device that can spray the dry powders to the desired region of the nasal cavity are needed to fully realize the potentials of the mAbs. Herein, we report that thin-film freeze-dried mAb powders can be sprayed into the posterior nasal cavity using Aptar Pharma's Unidose (UDS) Powder Nasal Spray System. AUG-3387, a human-derived mAb that neutralizes the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), was used in the present study. First, we prepared thin-film freeze-dried AUG-3387 powders (i.e., TFF AUG-3387 powders) from liquid formulations containing different levels of mAbs. The TFF AUG-3387 powder with the highest solid content (i.e., TFF AUG-3387C) was then chosen for further characterization, including the evaluation of the plume geometry, spray pattern, and particle size distribution after the powder was sprayed using the UDS Powder Nasal Spray. Finally, the deposition patterns of the TFF AUG-3387C powder sprayed using the UDS Powder delivery system were studied using 3D-printed nasal replica casts based on the CT scans of an adult and a child. It is concluded that it is feasible to intranasally deliver mAbs as dry powders by transforming the mAbs into dry powders using thin-film freeze-drying and then spraying the powder using a powder nasal spray system.

Inhalable paclitaxel nanoagglomerate dry powders for lung cancer chemotherapy: Design of experiments-guided development, characterization and in vitro evaluation.

Conventional intravenous chemotherapy for lung cancer frequently results in inefficient drug penetration into primary lung tumors and severe systemic toxicities. This study reports the development of inhalable paclitaxel (PTX) nanoagglomerate dry powders (PTX-NADP) for enhanced pulmonary delivery of PTX chemotherapy to lung tumors using full factorial Design of Experiments. PTX nanoparticles were fabricated by flash nanoprecipitation with the aid of N-polyvinylpyrrolidone (PVP) and curcumin (CUR) as stabilizer and co-stabilizer respectively, and subsequently agglomerated into inhalable dry powders via co-spray drying with methylcellulose. The optimized PTX-NADP formulation exhibited acceptable aqueous redispersibility (redispersibility index = 1.17 ± 0.02) into âˆ¼ 150 nm nanoparticles and superb in vitro aerosol performance [mass median aerodynamic diameter (MMAD) = 1.69 ± 0.05 µm and fine particle fraction (FPF) of 70.89 ± 1.72 %] when dispersed from a Breezhaler® at 90 L/min. Notably, adequate aerosolization (MMAD < 3.5 µm and FPF > 40 %) of the optimized formulation was maintained when dispersed at reduced inspiratory flow rates of 30 - 60 L/min. Redispersed PTX nanoparticles from PTX-NADP demonstrated enhanced in vitro antitumor efficacy and cellular uptake in A549 lung adenocarcinoma cells without compromising tolerability of BEAS-2B normal lung epithelial cells towards PTX chemotherapy. These findings highlight the potential of inhaled PTX-NADP therapy to improve therapeutic outcomes for lung cancer patients with varying levels of pulmonary function impairment.