Ingenious Architecture and Coloration Generation in Enamel of Rodent Teeth.

Teeth exemplify architectures comprising an interplay of inorganic and organic constituents, resulting in sophisticated natural composites. Rodents (Rodentia) showcase extraordinary adaptations, with their continuously growing incisors surpassing human teeth in functional and structural optimizations. In this study, employing state-of-the-art direct atomic-scale imaging and nanoscale spectroscopies, we present compelling evidence that the release of material from ameloblasts and the subsequent formation of iron-rich enamel and surface layers in the constantly growing incisors of rodents are complex orchestrated processes, intricately regulated and independent of environmental factors. The synergistic fusion of three-dimensional tomography and imaging techniques of etched rodent́s enamel unveils a direct correlation between the presence of pockets infused with ferrihydrite-like material and the acid resistant properties exhibited by the iron-rich enamel, fortifying it as an efficient protective shield. Moreover, observations using optical microscopy shed light on the role of iron-rich enamel as a microstructural element that acts as a path for color transmission, although the native color remains indistinguishable from that of regular enamel, challenging the prevailing paradigms. The redefinition of "pigmented enamel" to encompass ferrihydrite-like infusion in rodent incisors reshapes our perception of incisor microstructure and color generation. The functional significance of acid-resistant iron-rich enamel and the understanding of the underlying coloration mechanism in rodent incisors have far-reaching implications for human health, development of potentially groundbreaking dental materials, and restorative dentistry. These findings enable the creation of an entirely different class of dental biomaterials with enhanced properties, inspired by the ingenious designs found in nature.

A novel junctional epithelial cell line, mHAT-JE01, derived from incisor epithelial cells.

OBJECTIVES: Junctional epithelium (JE) connects the tooth surface and gingival epithelium and adheres directly to the tooth enamel. JE plays an important role as a barrier preventing the invasion of exogenous bacteria and substances. However, the cellular characteristics of this epithelium have not been adequately described, because no useful in vitro experimental model exists for JE. METHODS: We generated a novel JE cell line, mHAT-JE01, using naturally immortalized dental epithelium derived from incisor labial cervical cells and by selecting cells that adhered to apatite. mHAT-JE01 was characterized by immunohistochemistry and quantitative reverse transcription-polymerase chain reaction and compared with the gingival epithelial cell line, mOE-PE01. RESULTS: The mHAT-JE01 cells had a higher capacity for producing JE-specific markers than oral mucous epithelial cells. In addition, the presence of lipopolysaccharides from Porphyromonas gingivalis downregulated the expression of JE protein markers in mHAT-JE01 cells. CONCLUSIONS: This cell line is stable and presents the opportunity to characterize JE efficiently, which is essential for the prevention and treatment of periodontal disease.

Methodology to Quantify and Screen the Demineralization of Teeth by Immersing Them in Acidic Drinks (Orange Juice, Coca-Cola™, and Grape Juice): Evaluation by ICP OES.

Oral health problems may occur as a result of the ingestion of acid drinks. The objective of this in vitro study was to quantify and screen the concentration of potassium (K), phosphorus (P), calcium (Ca), magnesium (Mg), manganese (Mn), zinc (Zn), iron (Fe), copper (Cu), barium (Ba), lead (Pb), arsenic (As), cadmium (Cd), aluminum (Al), cobalt (Co), chromium (Cr), molybdenum (Mo), sodium (Na), nickel (Ni), selenium (Se), and vanadium (V) released from bovine incisors during an erosive challenge at different times of exposure when immersed in Coca-Cola™, orange juice, and grape juice. A total of 240 samples of bovine incisor teeth were used for the erosive challenge and allocated in groups. Digestion of drinks was performed using microwave-assisted digestion. The content in acidic drinks was monitored before and after the erosive challenge at exposure times of 1, 5, and 60 min using inductively coupled plasma optical emission spectrometry (ICP OES). The drinks' pH varied slightly during the erosive challenge but remained below the critical value of pH 5 to cause tooth demineralization. The concentrations of elements released from the bovine incisors during the in vitro erosive challenge depend on exposure times when immersed in acidic beverages. For some elements such as Ca, Mn, Zn, Fe, Cu, Ba, Pb, As, and Cd, quantified in acidic drinks, grape juice had greater erosive potential than Coca-Cola™ and orange juice. Quantification and monitoring of chemical elements in bovine teeth can be performed considering a longer erosive time and other types of acidic drinks. Further analysis using human teeth is still not available and must be conducted. The demineralization of teeth not only occurs in acidic beverages; physical and chemical factors play other roles and should be investigated.

Failure Modes and Survival of Anterior Crowns Supported by Narrow Implant Systems.

The reduced hardware design of narrow implants increases the risk of fracture not only of the implant itself but also of the prosthetic constituents. Hence, the current study is aimed at estimating the probability of survival of anterior crowns supported by different narrow implant systems. Three different narrow implant systems of internal conical connections were evaluated (Ø3.5 × 10 mm): (i) Active (Nobel Biocare), (ii) Epikut (S.I.N. Implant System), and (iii) BLX (Straumann). Abutments were torqued to the implants, and standardized maxillary incisor crowns were cemented. The assemblies were subjected to step-stress accelerated life testing (SSALT) in water through load application of 30 degrees off-axis lingually at the incisal edge of the crowns using a flat tungsten carbide indenter until fracture or suspension. The use level probability Weibull curves and reliability for completion of a mission of 100,000 cycles at 80 N and 120 N were calculated and plotted. Weibull modulus and characteristic strength were also calculated and plotted. Fractured samples were analyzed in a stereomicroscope. The beta (ß) values were 1.6 (0.9-3.1) and 1.4 (0.9-2.2) for BLX and Active implants, respectively, and 0.5 (0.3-0.8) for the Epikut implant, indicating that failures were mainly associated with fatigue damage accumulation in the formers, but more likely associated with material strength in the latter. All narrow implant systems showed high probability of survival (≥95%, CI: 85-100%) at 80 and 120 N, without significant difference between them. Weibull modulus ranged from 6 to 14. The characteristic strength of Active, Epikut, and BLX was 271 (260-282) N, 216 (205-228) N, and 275 (264-285) N, respectively. The failure mode predominantly involved abutment and/or abutment screw fracture, whereas no narrow implant was fractured. Therefore, all narrow implant systems exhibited a high probability of survival for anterior physiologic masticatory forces, and failures were restricted to abutment and abutment screw.

Finite element analysis of a one-piece zirconia implant in anterior single tooth implant applications.

This study evaluated the von Mises stress (MPa) and equivalent strain occurring around monolithic yttria-zirconia (Zir) implant using three clinically simulated finite element analysis (FEA) models for a missing maxillary central incisor. Two unidentified patients' cone-beam computed tomography (CBCT) datasets with and without right maxillary central incisor were used to create the FEA models. Three different FEA models were made with bone structures that represent a healed socket (HS), reduced bone width edentulous site (RB), and immediate extraction socket with graft (EG). A one-piece abutment-implant fixture mimicking Straumann Standard Plus tissue level RN 4.1 X 11.8mm, for titanium alloy (Ti) and Zir were modeled. 178 N oblique load and 200 N vertical load were used to simulate occlusal loading. Von Mises stress and equivalent strain values for around each implant model were measured. Within the HS and RB models the labial-cervical region in the cortical bone exhibited highest stress, with Zir having statistically significant lower stress-strain means than Ti in both labial and palatal aspects. For the EG model the labial-cervical area had no statistically significant difference between Ti and Zir; however, Zir performed better than Ti against the graft. FEA models suggest that Ti, a more elastic material than Zir, contributes to the transduction of more overall forces to the socket compared to Zir. Thus, compared to Ti implants, Zir implants may be less prone to peri-implant bone overloading and subsequent bone loss in high stress areas especially in the labial-cervical region of the cortical bone. Zir implants respond to occlusal loading differently than Ti implants. Zir implants may be more favorable in non-grafted edentulous or immediate extraction with grafting.

Forensic study of mechanical properties of dental restoration after burial in mangrove environment.

Conducting research in the field of forensic sciences with methodologies that simulate situations found in the day-to-day practice of a given field of expertise is relevant insofar as this approach can produce results that are as close as possible to reality. In this context, the present study provided situations based on burial in a mangrove environment to estimate the changes in the mechanical properties (Knoop microhardness, roughness and color) of dental restorations utilizing silver amalgam, composite resin and glass ionomer cement over the time of burial. The silver amalgam showed a significant increase in surface roughness and a reduction in Knoop microhardness. Composite resin showed a statistically significant increase in color variation, and the glass ionomer cement showed significant increases in color variation and Knoop microhardness. These results allowed us to conclude that teeth restored with silver amalgam, composite resin and glass ionomer cement submitted to burial in mangrove environments produce different changes in surface roughness, Knoop microhardness and color properties depending on the time of burial to which the victims were submitted. These proprieties could help the forensic sciences to estimate time intervals for burial in mangrove environments.

Variation of upper lip pressure on upper teeth during non-extraction orthodontic treatment: A prospective clinical study.

OBJECTIVE: The objectives of this prospective clinical study are to quantify the variation of pressure exerted by the upper lip on the upper teeth during the alignment phase and to evaluate its capacity to adapt to changes in dental position. MATERIALS AND METHODS: Thirty young subjects in skeletal Class I relationship requiring non-extraction orthodontic treatment were included in this study. The pressure exerted by the upper lip on the upper central incisors and right canine were measured during rest and swallowing positions using a pressure transducer before bracket placement (T0), after bracket placement (T1), three months (T2) and six months later (T3). Maxillary intercanine width (CC), upper arch length (U) and crowding (C) were measured on stone models at T1, T2 and T3 to determine the existence of a correlation between the variation of lip pressure and these variables. RESULTS: The lip pressure significantly increased after bracket placement and remained relatively stable during the six-month period. The labial pressure on the incisors was the only variable to significantly decrease at T3, though remaining significantly higher than the starting pressure. A positive correlation was found between the variation of the inter-canine distance and the labial pressure on the canine at rest whereas a negative correlation exists between the crowding and the labial pressure on the incisors at rest. CONCLUSION: This study showed that increasing inter-canine width disrupts the muscle equilibrium and therefore is prone to relapse, whereas the upper lip can better adapt to the protrusion of upper incisors.

Circumferential root strains generated during lateral compaction with stainless steel vs. nickel-titanium finger spreaders.

The circumferential strains created in the radicular dentin by nickel-titanium (NiTi) and stainless steel (SS) finger spreaders (FSs) during a simulated clinical procedure of lateral compaction were compared after minimal (size 50) and extensive (size 100) canal preparations. Nineteen maxillary central incisors underwent minimal preparation, while 10 underwent an extra phase of extensive preparation. Four miniature strain gauges were bonded circumferentially in the apical third of the root (buccal, lingual, mesial, and distal). Lateral compaction was performed using either NiTi-FSs or SS-FSs. Force and strains were continuously recorded. The maximal strains (with and without normalization according to force) were recorded. The SS-FSs generated higher maximal strains normalized according to force compared with the NiTi-FSs. The maximal normalized strains were higher by 37%-43% for the mesial and distal aspects and by 6%-14% for the buccal and lingual aspects after the minimal preparation and by 24%-28% for the mesial and distal aspects and by 19%-20% for the buccal and lingual aspects after extensive preparation. The maximal normalized strains increased by 30%-70% from minimal to extensive preparations, with two teeth exhibiting vertical root fracture while compaction with SS-FS. The NiTi-FSs induce less strain in root dentin than the SS-FSs and thus may contribute less to the risk of vertical root fracture.

Crystallographic texture and mineral concentration quantification of developing and mature human incisal enamel.

For human dental enamel, what is the precise mineralization progression spatially and the precise timing of mineralization? This is an important question in the fundamental understanding of matrix-mediated biomineralization events, but in particular because we can use our understanding of this natural tissue growth in humans to develop biomimetic approaches to repair and replace lost enamel tissue. It is important to understand human tissues in particular since different species have quite distinct spatial and temporal progression of mineralization. In this study, five human central incisors at different stages of enamel maturation/mineralization were spatially mapped using synchrotron X-ray diffraction and X-ray microtomography techniques. From the earliest developmental stage, two crystallite-orientation populations coexist with angular separations between the crystallite populations of approximately 40° varying as a function of position within the tooth crown. In general, one population had significantly lower texture magnitude and contributed a higher percentage to the overall crystalline structure, compared to the other population which contributed only 20-30% but had significantly higher texture magnitude. This quantitative analysis allows us to understand the complex and co-operative structure-function relationship between two populations of crystallites within human enamel. There was an increase in the mineral concentration from the enamel-dentin junction peripherally and from the incisal tip cervically as a function of maturation time. Quantitative backscattered-electron analyses showed that mineralization of prism cores precedes that of prism boundaries. These results provide new insights into the precise understanding of the natural growth of human enamel.

Structural differences in enamel and dentin in human, bovine, porcine, and ovine teeth.

BACKGROUND: The aim was to study differences between crystalline nanostructures from the enamel and dentin of human, bovine, porcine, and ovine species. METHODS: Dentine and enamel fragments extracted from sound human, bovine, porcine and ovine incisors and molars were mechanically ground up to a final particle size of <100µm. Samples were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). RESULTS: Human enamel (HE) and dentin (HD) showed a-axis and c-axis lengths of the carbonate apatite (CAP) crystal lattice nearer to synthetic hydroxyapatite (SHA), which had the smallest size. Enamel crystal sizes were always higher than those of dentin for all species. HE and HD had the largest crystal, followed by bovine samples. Hydroxyapatites (HAs) in enamel had a higher crystallinity index (CI), CIRietveld and CIFTIR, than the corresponding dentin of the same species. HE and HD had the highest CIs, followed by ovine enamel (OE). The changes in heat capacity that were nearest to values in human teeth during the glass transition (ΔCp) were in porcine specimens. There was a significant direct correlation between the size of the a-axis and the substitution by both type A and B carbonates. The size of the nanocrystals and the crystallinity (CIRietveld y CIFTIR) were significantly and negatively correlated with the proteic phase of all the substrates. There was a strongly positive correlation between the caloric capacity, the CIs and the crystal size and a strongly negative correlation between carbonates type A and B and proteins. CONCLUSIONS: There are differences in the organic and inorganic content of human, bovine, porcine and ovine enamels and dentins which should be taken into account when interpreting the results of studies using animal substrates as substitutes for human material.

STEM and HRTEM studies of accumulated deposits on human tooth surface.

The aim of this study was to clarify the fine structure of accumulated deposits on the surface of teeth that are considered to affect the gloss of teeth. The study was carried out using, as specimens, human incisor teeth having gloss, which were extracted from teenage donors and those incapable of showing gloss even by brushing which were extracted from donors in their 50s. Thin longitudinal sections of tooth enamel with accumulated deposits on the surface were prepared by focused ion beam (FIB) milling, and the fine structure was analyzed using a scanning transmission electron microscope (STEM) and a high resolution transmission electron microscope (HRTEM). By FIB, thin longitudinal sections could be prepared from tooth enamel together with organic and inorganic substances accumulated on the surface without artifacts. The accumulated deposits on the surface of teeth having gloss were composed of organic substances. However, it was first revealed by STEM observation that the accumulated solid deposits on the surface of teeth having no gloss had a complicated structure wherein inorganic and organic substances coexisted. It is suggested that the organic substances contain proteins derived from saliva. The inorganic substances were spherical and needle-like hydroxyapatites (HAs). It is considered that amino acids constituting the proteins affected the nucleus formation and the crystal formation of HA. It is considered that the unevenness of the accumulated deposits existing on the surface of tooth enamel having no gloss causes the decrease in gloss of teeth due to diffuse reflection of light.

Radiographic technique and brackets affect measurements of proximal enamel thickness on mandibular incisors.

OBJECTIVE: To investigate the influence of radiographic film and tube positioning, the presence and the size of brackets on in vitro measurements of proximal enamel thickness of mandibular incisors on periapical radiographs aimed to aid planning of interproximal enamel reduction procedures in orthodontics. MATERIALS AND METHODS: Eighty human mandibular incisors were assigned to sets of four and located in a customized base. Periapical radiographs were taken with the film positioned at three different angles (0°, 2°, and 5°) in relation to the frontal plane and the tube head positioned at five angles (0°, -2°, -5°, +2°, and +5°) in relation to the sagittal plane. The proximal enamel width was calculated by means of computerized image analysis and compared with measurements obtained at 0°. Statistical analysis was carried out to compare the enamel measurements on radiographs made with all angular combinations with and without the presence of brackets of different dimensions. RESULTS: A significant difference (P < 0.05) was found between the measurements of proximal enamel width obtained at the different angles in relation to the frontal and sagittal planes for all sets with or without brackets. The presence of brackets significantly affected the measured width only for the enamel side further away from the radiation source at the sagittal plane (P < 0.05). CONCLUSION: Angular changes in taking periapical radiographs of mandibular incisors and the presence of brackets significantly affect interproximal enamel measurements made with image analysis software.

Effects of enamel sealing on shear bond strength and the adhesive remnant index : Study of three fluoride-releasing adhesives in combination with metal and ceramic brackets.

OBJECTIVES: Selected combinations of materials were used to create tooth-adhesive-bracket complexes to evaluate shear bond strength (SBS) and the adhesive remnant index (ARI) with regard to enamel sealing. METHODS: Four adhesive systems also appropriate for use as enamel sealants were combined with four bracket types, resulting in 16 adhesive-bracket combinations, each of which was tested on 15 permanent bovine incisors. Sealant-adhesives included two recently introduced fluoride-releasing systems (Riva bond LC® and go!®), one established primer (Opal® Seal™), and one commonly used adhesive as control (Transbond™ XT). Brackets included two metal (discovery® by Dentaurum and Sprint®) and two ceramic (discovery® pearl and GLAM®) systems. After embedding the bovine teeth, bonding the brackets to their surface, and storing the resultant samples as per DIN 13990-2 with modifications, an SBS test was performed by applying the shear force directly at the bracket base in an incisocervical direction. Then the ARI scores were determined. RESULTS: Discovery® + Transbond™ XT yielded the highest (47.2 MPa) and GLAM® + go!® the lowest (17.0 MPa) mean SBS values. Significant differences (p < 0.0001) were found between metal and ceramic brackets of the same manufacturers (Dentaurum and Forestadent). Our ratings of the failure modes upon debonding predominantly yielded ARI 0 or 1. The high SBS values and low ARI scores observed with discovery® + Transbond XT™ were reflected in a high rate of enamel fracture, which occurred on 11 of the 15 tooth specimens in this group. CONCLUSIONS: All sealant-bracket combinations were found to yield levels of SBS adequate for clinical application. SBS values and ARI scores varied significantly depending on which sealant-brackets were used.

Strain Distribution in Root Surface Dentin of Maxillary Central Incisors during Lateral Compaction.

AIM: To precisely quantify the circumferential strains created along the radicular dentin of maxillary incisors during a simulated clinical procedure of lateral compaction. METHODS: Six miniature strain gauges were bonded on the roots of fourteen recently extracted maxillary central incisors that were subjected to root canal instrumentation. The strain gauges were bonded at three levels (apical, middle, and coronal) and four aspects (buccal, lingual, mesial, and distal) of the roots. Each tooth was embedded in a PVC cylinder containing polyvinyl-siloxane impression material. Root filling was then performed by simulating the clinical procedure of lateral compaction using nickel-titanium finger spreaders. The force applied to the spreader and the strains developing in the surface root dentin were continuously recorded at a frequency of 10 Hz. RESULTS: The highest strains that developed during lateral compaction were in the mesial and distal aspects at the apical level of the root. The magnitudes of the maximal mesial/distal strains at the apical as well as the mid-root levels were approximately 2.5-3 times higher than those at the buccal/lingual aspects (p = 0.041). The strains decreased significantly (p<0.04) from the apical through the mid-root levels to the coronal level, yielding gradients of 2.5- and 6-fold, respectively. The mesial and distal strains were consistently tensile and did not differ significantly; however, the buccal strains were generally 35-65% higher than the lingual strains (p = 0.078). Lateral compaction resulted in the gradual build-up of residual strains, resulting in generation of a 'stair-step' curve. These strains declined gradually and almost completely disappeared after 1000 sec. CONCLUSIONS: With proper mounting of several miniature strain gauges at various levels and aspects of the root, significant circumferential strains can be monitored under clinically relevant compaction forces. The residual strains at the end of lateral compaction are not stored in the dentin but decrease gradually to negligible levels.

Structural and Morphometric Comparison of Lower Incisors in PACAP-Deficient and Wild-Type Mice.

Pituitary adenylate cyclase activating polypeptide (PACAP) is a neuropeptide with widespread distribution. PACAP plays an important role in the development of the nervous system, it has a trophic and protective effect, and it is also implicated in the regulation of various physiological functions. Teeth are originated from the mesenchyme of the neural crest and the ectoderm of the first branchial arch, suggesting similarities with the development of the nervous system. Earlier PACAP-immunoreactive fibers have been found in the odontoblastic and subodontoblastic layers of the dental pulp. Our previous examinations have shown that PACAP deficiency causes alterations in the morphology and structure of the developing molars of 7-day-old mice. In our present study, morphometric and structural comparison was performed on the incisors of 1-year-old wild-type and PACAP-deficient mice. Hard tissue density measurements and morphometric comparison were carried out on the mandibles and the lower incisors with micro-CT. For structural examination, Raman microscopy was applied on frontal thin sections of the mandible. With micro-CT morphometrical measurements, the size of the incisors and the relative volume of the pulp to dentin were significantly smaller in the PACAP-deficient group compared to the wild-type animals. The density of calcium hydroxyapatite in the dentin was reduced in the PACAP-deficient mice. No structural differences could be observed in the enamel with Raman microscopy. Significant differences were found in the dentin of PACAP-deficient mice with Raman microscopy, where increased carbonate/phosphate ratio indicates higher intracrystalline disordering. The evaluation of amide III bands in the dentin revealed higher structural diversity in wild-type mice. Based upon our present and previous results, it is obvious that PACAP plays an important role in tooth development with the regulation of morphogenesis, dentin, and enamel mineralization. Further studies are required to clarify the molecular background of the effects of PACAP on tooth development.

Comparison of shear bond strength of universal adhesives on etched and nonetched enamel.

BACKGROUND: The purpose of this study was to evaluate the effect of surface pretreatment with 37% phosphoric acid on the enamel bond strength of different universal adhesives. METHODS: One hundred and sixty bovine permanent mandibular incisors freshly extracted were used as a substitute for human teeth. The materials tested in this study included 6 universal adhesives, and 2 self-etch adhesives as control. The teeth were assigned into 2 groups: In the first group, etching was performed using 37% phosphoric acid for 30 seconds. In the second group, no pretreatment agent was applied. After adhesive application, a nanohybrid composite resin was inserted into the enamel surface by packing the material into cylindrical-shaped plastic matrices. After storing, the specimens were placed in a universal testing machine. The normality of the data was calculated using the Kolmogorov-Smirnov test. Analysis of variance (ANOVA) was applied to determine whether significant differences in debond strength values existed among the various groups. RESULTS: Groups with phosphoric acid pretreatment showed significantly higher shear bond strength values than groups with no enamel pretreatment (p<0.001). No significant variation in shear strength values was detected when comparing the different adhesive systems applied onto enamel after orthophosphoric acid application (p>0.05). CONCLUSIONS: All adhesives provide similar bond strength values when enamel pretreatment is applied even if compositions are different. Bond strength values are lower than promised by manufacturers.

Shear bond strength of brackets on restorative materials: Comparison on various dental restorative materials using the universal primer Monobond® Plus.

OBJECTIVE: The purpose of this work was to analyze surfaces consisting of different restorative materials for shear bond strength (SBS) and failure patterns of metal and ceramic brackets. Bonding involved the use of a universal primer (Monobond® Plus, Ivoclar Vivadent). MATERIALS AND METHODS: Six restorative materials were tested, including one composite resin (Clearfil Majesty™ Posterior, Kuraray Noritake Dental), one glass-ceramic material (IPS Empress® Esthetic, Ivoclar Vivadent), one oxide-ceramic material (CORiTEC Zr transpa Disc, imes-icore), two base-metal alloys (remanium® star, Dentaurum; Colado® CC, Ivoclar Vivadent), and one palladium-based alloy (Callisto® 75 Pd, Ivoclar Vivadent). Bovine incisors served as controls. Both metal and ceramic brackets (discovery®/discovery® pearl; Dentaurum) were bonded to the restorative surfaces after sandblasting and pretreatment with Monobond® Plus. A setup modified from DIN 13990-2 was used for SBS testing and adhesive remnant index (ARI)-based analysis of failure patterns. RESULTS: The metal brackets showed the highest mean SBS values on the glass-ceramic material (68.61 N/mm(2)) and the composite resin (67.58 N/mm(2)) and the lowest mean SBS on one of the base-metal alloys (Colado® CC; 14.01 N/mm(2)). The ceramic brackets showed the highest mean SBS on the glass-ceramic material (63.36 N/mm(2)) and the lowest mean SBS on the palladium-based alloy (38.48 N/mm(2)). Significant differences between the metal and ceramic brackets were observed in terms of both SBS values and ARI scores (p < 0.05). Under both bracket types, fractures of the composite-resin and the glass-ceramic samples were observed upon debonding. Opaque restorative materials under metal brackets were found to involve undercuring of the adhesive. CONCLUSIONS: Monobond® Plus succeeded in generating high bond strengths of both bracket types on all restorative surfaces. Given our observations of cohesive fracture (including cases of surface avulsion) of the composite-resin and the glass-ceramic samples, we recommend against using these material combinations in clinical practice.

Influence of a Brazilian wild green propolis on the enamel mineral loss and Streptococcus mutans' count in dental biofilm.

OBJECTIVE: This study investigated the anti-demineralizing and antibacterial effects of a propolis ethanolic extract (EEP) against Streptococcus mutans dental biofilm. DESIGN: Blocks of sound bovine enamel (n=24) were fixed on polystyrene plates. S. mutans inoculum (ATCC 25175) and culture media were added (48 h-37 °C) to form biofilm. Blocks with biofilm received daily treatment (30 µL/1 min), for 5 days, as following: G1 (EEP 33.3%); G2 (chlorhexidine digluconate 0.12%); G3 (ethanol 80%); and G4 (Milli-Q water). G5 and G6 were blocks without biofilm that received only EEP and Milli-Q water, respectively. Final surface hardness was evaluated and the percentage of hardness loss (%HL) was calculated. The EEP extract pH and total solids were determined. S. mutans count was expressed by log10 scale of Colony-Forming Units (CFU/mL). One way ANOVA was used to compare results which differed at a 95% significance level. RESULTS: G2 presented the lowest average %HL value (68.44% ± 12.98) (p=0.010), while G4 presented the highest (90.49% ± 5.38%HL) (p=0.007). G1 showed %HL (84.41% ± 2.77) similar to G3 (87.80% ± 6.89) (p=0.477). Groups G5 and G6 presented %HL=16.11% ± 7.92 and 20.55% ± 10.65; respectively (p=0.952). G1 and G4 differed as regards to S. mutans count: 7.26 ± 0.08 and 8.29 ± 0.17 CFU/mL, respectively (p=0.001). The lowest bacterial count was observed in chlorhexidine group (G2=6.79 ± 0.10 CFU/mL) (p=0.043). There was no difference between S. mutans count of G3 and G4 (p=0.435). The EEP showed pH 4.8 and total soluble solids content=25.9 Brix. CONCLUSION: The EEP seems to be a potent antibacterial substance against S. mutans dental biofilm, but presented no inhibitory action on the de-remineralization of caries process.

Comparative Physicochemical Analysis of Pulp Stone and Dentin.

INTRODUCTION: Odontoblasts are responsible for the synthesis of dentin throughout the life of the tooth. Tooth pulp tissue may undergo a pathologic process of mineralization, resulting in formation of pulp stones. Although the prevalence of pulp stones in dental caries is significant, their development and histopathology are poorly understood, and their precise composition has never been established. The aim of the present study was to investigate the physicochemical properties of the mineralized tissues of teeth to elucidate the pathologic origin of pulp stones. METHODS: Areas of carious and healthy dentin of 8 decayed teeth intended for extraction were analyzed and compared. In addition, 6 pulp stones were recovered from 5 teeth requiring root canal treatment. The samples were embedded in resin, sectioned, and observed by scanning electron microscopy and energy-dispersive spectroscopy. X-ray diffraction was performed to identify phases and crystallinity. X-ray fluorescence provided information on the elemental composition of the samples. RESULTS: Pulp stones showed heterogeneous structure and chemical composition. X-ray diffraction revealed partially carbonated apatite. X-ray fluorescence identified P, Ca, Cu, Zn, and Sr within dentin and pulp stones. Zn and Cu concentrations were higher in pulp stones and carious dentin compared with healthy dentin. CONCLUSIONS: Pulpal cells produce unstructured apatitic mineralizations containing abnormally high Zn and Cu levels.

Evaluation of Temperature and Stress Distribution on 2 Different Post Systems Using 3-Dimensional Finite Element Analysis.

BACKGROUND The mouth is exposed to thermal irritation from hot and cold food and drinks. Thermal changes in the oral cavity produce expansions and contractions in tooth structures and restorative materials. The aim of this study was to investigate the effect of temperature and stress distribution on 2 different post systems using the 3-dimensional (3D) finite element method. MATERIAL AND METHODS The 3D finite element model shows a labio-lingual cross-sectional view of the endodontically treated upper right central incisor and supporting periodontal ligament with bone structures. Stainless steel and glass fiber post systems with different physical and thermal properties were modelled in the tooth restored with composite core and ceramic crown. We placed 100 N static vertical occlusal loading onto the center of the incisal surface of the tooth. Thermal loads of 0°C and 65°C were applied on the model for 5 s. Temperature and thermal stresses were determined on the labio-lingual section of the model at 6 different points. RESULTS The distribution of stress, including thermal stress values, was calculated using 3D finite element analysis. The stainless steel post system produced more temperature and thermal stresses on the restorative materials, tooth structures, and posts than did the glass fiber reinforced composite posts. CONCLUSIONS Thermal changes generated stresses in the restorative materials, tooth, and supporting structures.