Enhanced degradation of phototreated recycled and unused low-density polyethylene films by Pleurotus ostreatus.

Polyethylene, one of the most used petroleum-derived polymers, causes serious environmental pollution. The ability of Pleurotus ostreatus to degrade UV-treated and untreated recycled and unused (new) low-density polyethylene (LDPE) films was studied. We determined the fungal biomass production, enzyme production, and enzyme yield. Changes in the chemical structure and surface morphology of the LDPE after fungal growth were analyzed using FTIR spectroscopy and SEM. Functional group indices and contact angles were also evaluated. In general, the highest Lac (6013 U/L), LiP (2432 U/L), MnP (995 U/L) and UP (6671 U/L) activities were observed in irradiated recycled LDPE (IrRPE). The contact angle of all samples was negatively correlated with fermentation time; the smaller the contact angle, the longer the fermentation time, indicating effective biodegradation. The IrRPE samples exhibited the smallest contact angle (49°) at 4 weeks, and the samples were fragmented (into two pieces) at 5 weeks. This fungus could degrade unused (new) LDPE significantly within 6 weeks. The biodegradation of LDPE proceeded faster in recycled than in unused samples, which can be enhanced by exposing LDPE to UV radiation. Enzymatic production during fungal growth suggest that LDPE degradation is initiated by laccase (Lac) followed by lignin peroxidase (LiP), whereas manganese peroxidase (MnP) and unspecific peroxygenase (UP) are involved in the final degradation process. This is the first experimental study on the fungal growth and its main enzymes involved in LDPE biodegradation. This fungus has great promise as a safe, efficient, and environmentally friendly organism capable of degrading LDPE.

Fungal Laccases and Fumonisin Decontamination in Co-Products of Bioethanol from Maize.

Maize (Zea mays L.) may be infected by Fusarium verticillioides and F. proliferatum, and consequently contaminated with fumonisins (FBs), as well as the co-products of bioethanol intended for animal feed. Laccase enzymes have a wide industrial application such as mycotoxin degradation. The aims were to isolate and identify fungal laccase-producing strains, to evaluate laccase production, to determine the enzymatic stability under fermentation conditions, and to analyse the effectiveness in vitro of enzymatic extracts (EEs) containing laccases in degrading FB1. Strains belonging to Funalia trogii, Phellinus tuberculosus, Pleurotus ostreatus, Pycnoporus sanguineus and Trametes gallica species showed laccase activity. Different isoforms of laccases were detected depending on the evaluated species. For the FB1 decontamination assays, four enzymatic activities (5, 10, 15 and 20 U/mL) were tested, in the absence and presence of vanillic acid (VA) and 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) as redox mediators (1 and 10 mM). Trametes gallica B4-IMICO-RC EE was the most effective strain in buffer, achieving a 60% of FB1 reduction. Laccases included in EEs remained stable at different alcoholic degrees in maize steep liquor (MSL), but no significant FB1 reduction was observed under the conditions evaluated using MSL. This study demonstrate that although laccases could be good candidates for the development of a strategy to reduce FB1, further studies are necessary to optimise this process in MSL.

Thermostabilization of a fungal laccase by entrapment in enzymatically synthesized levan nanoparticles.

In this work, we present a comprehensive investigation of the entrapment of laccase, a biotechnologically relevant enzyme, into levan-based nanoparticles (LNPs). The entrapment of laccase was achieved concomitantly with the synthesis of LNP, catalyzed by a truncated version of a levansucrase from Leuconostoc mesenteroides. The study aimed to obtain a biocompatible nanomaterial, able to entrap functional laccase, and characterize its physicochemical, kinetic and thermal stability properties. The experimental findings demonstrated that a colloidal stable solution of spherically shaped LNP, with an average diameter of 68 nm, was obtained. An uniform particle size distribution was observed, according to the polydispersity index determined by DLS. When the LNPs synthesis was performed in the presence of laccase, biocatalytically active nanoparticles with a 1.25-fold larger diameter (85 nm) were obtained, and a maximum load of 243 µg laccase per g of nanoparticle was achieved. The catalytic efficiency was 972 and 103 (µM·min)-1, respectively, for free and entrapped laccase. A decrease in kcat values (from 7050 min-1 to 1823 min-1) and an increase in apparent Km (from 7.25 µM to 17.73 µM) was observed for entrapped laccase, compared to the free enzyme. The entrapped laccase exhibited improved thermal stability, retaining 40% activity after 1 h-incubation at 70°C, compared to complete inactivation of free laccase under the same conditions, thereby highlighting the potential of LNPs in preserving enzyme activity under elevated temperatures. The outcomes of this investigation significantly contribute to the field of nanobiotechnology by expanding the applications of laccase and presenting an innovative strategy for enhancing enzyme stability through the utilization of fructan-based nanoparticle entrapments.

Ligninolytic enzyme potential of Trametes spp. associated with leaf litter in riparian forest of the Amazônia region.

The present study explored the potential of leaf litter as a source of fungi able to produce ligninolytic enzymes for the biodegradation of anthraquinone dyes. Within the colonies isolated from the leaf litter, only three colonies of two species Trametes were selected based on the detection of oxidation and decolorization halos in Petri dishes with PDA (potato-dextrose-agar) + Guaicol and PDA + RBBR (Remazol Brilliant Blue R). The identification of the colonies was done through sequencing of the ITS region. The enzymatic activity of Lac (lacase), MnP (manganês peroxidase) and LiP (lignina peroxidase) was analyzed by spectrophotometry during fermentation in PD+RBBR imedium. Isolates A1SSI01 and A1SSI02 were identified as Trametes flavida, while A5SS01 was identified as Trametes sp. Laccase showed the highest enzymatic activity, reaching 452.13 IU.L-1 (A1SSI01, 0.05% RBBR) after 96h. Isolate A1SSI02 reached the highest percentage of decolorization, achieving 89.28% in seven days. The results imply that these Trametes isolates can be highly effective in waste treatment systems containing toxic anthraquinone dyes. Keywords: laccase, peroxidases, basidiomycete, litter and biodecolorization.

Improved productivity and dye removal performance of Trametes versicolor pellets using rice husk as a co-substrate.

Pellet production represents a critical step for several processes requiring fungal biomass, nevertheless, its optimization is seldom reported. The use of finely ground rice husk as a microcarrier and co-substrate permitted a marked increase (≈ 2.7×) in the productivity of fungal pellet production using Trametes versicolor compared to traditional production methods. The pellets show similar structure and smaller size compared to typical sole-mycelium pellets, as well as comparable laccase activity. The efficiency of the pellets for biodegradation was confirmed by the removal of the crystal violet dye, achieving significantly faster decolorization rates compared to the traditionally produced pellets. The use of these pellets during the continuous treatment of the dye in a stirred tank bioreactor resulted in 97% decolorization operating at a hydraulic residence time of 4.5 d.

Measuring Laccase Activity and Melanin Production in Cryptococcus neoformans.

Melanin is a complex dark pigment synthetized by the phenoloxidase enzyme laccase in Cryptococcus neoformans. In vitro, this enzyme oxidizes exogenous catecholamines to produce melanin that may be secreted or incorporated into the fungal cell wall. This pigment has multiple roles in C. neoformans virulence during its interaction with different hosts and probably also in protecting fungal cells in the environment against predation and oxidative and radiation stresses, among others. However, it is important to note that laccase also has melanin-independent roles in C. neoformans interactions with host cells. In this chapter, we describe a quantitative laccase assay and a method for evaluating the kinetics of melanin production in C. neoformans colonies.

Bioprospecting of endophytic fungi from semidesert candelilla (Euphorbia antisyphilitica Zucc): Potential for extracellular enzyme production.

Endophytic microbial communities colonize plants growing under various abiotic stress conditions. Candelilla (Euphorbia antisyphilitica Zucc.) is a shrub that develops functionally in arid and semi-arid zones of Mexico; these conditions generate an association between the plant and the microorganisms, contributing to the production of enzymes as a defense mechanism for resistance to abiotic stress. The objective of this research was to isolate and identify endophyte fungi of candelilla and bioprospection of these endophytic fungi for enzyme production using candelilla by-products. Fungi were isolated and identified using ITS1/ITS4 sequencing. Their potency index (PI) was evaluated in producing endoglucanase, xylanase, amylase, and laccase. Fermentation was carried out at 30°C for 8 days at 200 rpm, with measurements every 2 days, using candelilla by-products as substrate. All fungi exhibited higher cellulase, amylase, and laccase activities on the 2nd, 6th, and 8th day of fermentation, respectively, of fermentation. The fungus Aspergillus niger ITD-IN4.1 showed the highest amylase activity (246.84 U/mg), the genus Neurospora showed the highest cellulase activity, reaching up to 13.45 FPU/mg, and the strain Neurospora sp. ITD-IN5.2 showed the highest laccase activity (3.46 U/mg). This work provides the first report on the endophytic diversity of E. antisyphilitica and its potential role in enzyme production.

Decisional tool development and application for techno-economic analysis of fungal laccase production.

Textile and medical effluents causing bioaccumulation and biomagnification have been successfully biodegraded by fungal laccases. Here, a decision-making tool was developed and applied to evaluate 45 different laccase production strategies which determined the best potential source from a techno-economical perspective. Laccase production cost was calculated with a fixed output of 109 enzymatic units per batch (USD$per109U) and a sensitivity analysis was performed. Results indicate that optimization of enzymatic kinetics for each organism is essential to avoid exceeding the fermentation time point at which production titer reaches its peak and, therefore, higher production costs. Overall, the most cost-effective laccase-producing strategy was obtained when using Pseudolagarobasidium acaciicola with base production cost of USD $42.46 per 109 U. This works serves as platform for decision-making to find the optimal laccase production strategy based on techno-economic parameters.

Lignin degradation by a novel thermophilic and alkaline yellow laccase from Chitinophaga sp.

Laccases (EC 1.10.3.2) are oxidoreductases that belong to the multicopper oxidase subfamily and are classified as yellow/white or blue according to their absorption spectrum. Yellow laccases are more useful for industrial processes since they oxidize nonphenolic compounds in the absence of a redox mediator and stand out for being more stable and functional under extreme conditions. This study aimed to characterize a new laccase that was predicted to be present in the genome of Chitinophaga sp. CB10 - Lac_CB10. Lac_CB10, with a molecular mass of 100.06 kDa, was purified and characterized via biochemical assays using guaiacol as a substrate. The enzyme demonstrated extremophilic characteristics, exhibiting relative activity under alkaline conditions (CAPS buffer pH 10.5) and thermophilic conditions (80-90°C), as well as maintaining its activity above 50% for 5 h at 80°C and 90°C. Furthermore, Lac_CB10 presented a spectral profile typical of yellow laccases, exhibiting only one absorbance peak at 300 nm (at the T2/T3 site) and no peak at 600 nm (at the T1 site). When lignin was degraded using copper as an inducer, 52.27% of the material was degraded within 32 h. These results highlight the potential of this enzyme, which is a novel yellow laccase with thermophilic and alkaline activity and the ability to act on lignin. This enzyme could be a valuable addition to the biorefinery process. In addition, this approach has high potential for industrial application and in the bioremediation of contaminated environments since these processes often occur at extreme temperatures and pH values. IMPORTANCE: The characterization of the novel yellow laccase, Lac_CB10, derived from Chitinophaga sp. CB10, represents a significant advancement with broad implications. This enzyme displays exceptional stability and functionality under extreme conditions, operating effectively under both alkaline (pH 10.5) and thermophilic (80-90°C) environments. Its capability to maintain considerable activity over extended periods, even at high temperatures, showcases its potential for various industrial applications. Moreover, its distinctive ability to efficiently degrade lignin-demonstrated by a significant 52.27% degradation within 32 h-signifies a promising avenue for biorefinery processes. This newfound laccase's characteristics position it as a crucial asset in the realm of bioremediation, particularly in scenarios involving contamination at extreme pH and temperature levels. The study's findings highlight the enzyme's capacity to address challenges in industrial processes and environmental cleanup, signifying its vital role in advancing biotechnological solutions.

Optimization studies on laccase activity of Proteus mirabilis isolated from treatment sludge of textile industry factories : Optimization of laccase activity of Proteus mirabilis.

Laccase is an exothermic enzyme with copper in its structure and has an important role in biodegradation by providing oxidation of phenolic compounds and aromatic amines and decomposing lignin. The aim of this study is to reach maximum laccase enzyme activity with minimum cost and energy through optimization studies of Proteusmirabilis isolated from treatment sludge of a textile factory. In order to increase the laccase enzyme activities of the isolates, medium and culture conditions were optimized with the study of carbon (Glucose, Fructose, Sodium Acetate, Carboxymethylcellulose, Xylose) and nitrogen sources (Potassium nitrate, Yeast Extract, Peptone From Soybean, Bacteriological Peptone), incubation time, pH, temperature and Copper(II) sulfate concentration then according to the results obtained. Response Surface Method (RSM) was performed on six different variables with three level. According to the data obtained from the RSM, the maximum laccase enzyme activity is reached at pH 7.77, temperature 30.03oC, 0.5 g/L CuSO4, 0.5 g/L fructose and 0.082 g/L yeast extract conditions. After all, the laccase activity increased 2.7 times. As a result, laccase activity of P. mirabilis can be increased by optimization studies. The information obtained as a result of the literature studies is that the laccase enzymes produced in laboratory and industrial scale are costly and their amounts are low. This study is important in terms of obtaining more laccase activity from P.mirabilis with less cost and energy.

Using low-shear aerated and agitated bioreactor for producing two specific laccases by trametes versicolor cultures induced by 2,5-xylidine: Process development and economic analysis.

Laccase isoforms from basidiomycetes exhibit a superior redox potential compared to commercially available laccases obtained from ascomycete fungi, rendering them more reactive toward mono-substituted phenols and polyphenolic compounds. However, basidiomycetes present limitations for large-scale culture in liquid media, restraining the current availability of laccases from this fungal class. To advance laccase production from basidiomycetes, a newly designed 14-L low-shear aerated and agitated bioreactor provided enzyme titers up to 23.5 IU/mL from Trametes versicolor cultures. Produced enzymes underwent ultrafiltration and LC/MS-MS characterization, revealing the predominant production of only two out of the ten laccases predicted in the T. versicolor genome. Process simulation and economic analysis using SuperPro designer® suggested that T. versicolor laccase could be produced at US$ 3.60/kIU in a 200-L/batch enterprise with attractive economic parameters and a payback period of 1.7 years. The study indicates that new bioreactors with plain design help to produce low-cost enzymes from basidiomycetes.

Evaluation of Antibiotic Biodegradation by a Versatile and Highly Active Recombinant Laccase from the Thermoalkaliphilic Bacterium Bacillus sp. FNT.

Laccases are industrially relevant enzymes that have gained great biotechnological importance. To date, most are of fungal and mesophilic origin; however, enzymes from extremophiles possess an even greater potential to withstand industrial conditions. In this study, we evaluate the potential of a recombinant spore-coat laccase from the thermoalkaliphilic bacterium Bacillus sp. FNT (FNTL) to biodegrade antibiotics from the tetracycline, ß-lactams, and fluoroquinolone families. This extremozyme was previously characterized as being thermostable and highly active in a wide range of temperatures (20-90 °C) and very versatile towards several structurally different substrates, including recalcitrant environmental pollutants such as PAHs and synthetic dyes. First, molecular docking analyses were employed for initial ligand affinity screening in the modeled active site of FNTL. Then, the in silico findings were experimentally tested with four highly consumed antibiotics, representatives of each family: tetracycline, oxytetracycline, amoxicillin, and ciprofloxacin. HPLC results indicate that FNTL with help of the natural redox mediator acetosyringone, can efficiently biodegrade 91, 90, and 82% of tetracycline (0.5 mg mL-1) in 24 h at 40, 30, and 20 °C, respectively, with no apparent ecotoxicity of the products on E. coli and B. subtilis. These results complement our previous studies, highlighting the potential of this extremozyme for application in wastewater bioremediation.

Caatinga, Amazon and Atlantic Forest as natural sources for microbial lignocellulolytic enzymes.

Brazilian biomes are important sources for environmental microorganisms, including efficient metabolic machineries, like actinomycetes. These bacteria are known for their abilities to produce many bioactive compounds, including enzymes with multiple industrial applications. The present work aimed to evaluate lignocellulolytic abilities of actinomycetes isolated from soil and rhizosphere samples collected at Caatinga, Atlantic and Amazon Forest. Laccase (Lac), lignin peroxidase (LiP), manganese peroxidase (MnP) and cellulase were evaluated for their efficiency. These enzymes have an essential role in lignin decomposition, through oxidation of phenolic and non-phenolic compounds, as well as enzymatic hydrolysis of vegetal biomass. In this sense, a total of 173 actinomycetes were investigated. Eleven (11) of them were selected by their enzymatic performance. The actinomycete AC166 displayed some activity in all analysed scenarios in terms of Lac, MnP and LiP activity, while AC171 was selected as the most promising strain, showing the following activities: 29.7 U.L-1 for Lac; 2.5 U.L-1 for LiP and 23 U.L-1 for MnP. Cellulolytic activities were evaluated at two pH conditions, 4.8 and 7.4, obtaining the following results: 25 U.L-1 and 71 U.L-1, respectively. Thermostability (4, 30 and 60 o C) and salinity concentrations (0 to 4 M) and pH variation (2.0 to 9.0) stabilities of the obtained LiP and Lac enzymatic extracts were also verified. The actinomycete strain AC171 displayed an adaptable response in distinct pH and salt profiles, indicating that bacterial LiP was some halophilic type. Additionally, the strain AC149 produced an alkali and extreme halophilic lignin peroxidase, which are promising profiles for their future application under lignocellulosic biomass at bioethanol biorefineries.

Degradation of tetracycline, oxytetracycline & ampicillin by purified multiple copper oxidase like laccase from Stentrophomonas sp. YBX1.

Multiple copper oxidase (MCO) like laccase is widely distributed in higher plant, fungi and bacteria. This study identified MCO like laccase producing bacterium isolated from a wastewater treatment plant based on 16S rRNA sequence analysis, and they were further confirmed by phylogenetic reconstruction. Biochemical and gene characterization of MCO like laccase from Stenotrophomonas sp. YBX1 is presented. Purification of MCO like laccase was carried out by ion exchange HQ Trap column and followed by gel filtration spheracryl S-100 column. The purified MCO like laccase from Stenotrophomonas sp. YBX1 shows a total activity of 1252 units and specific activity 391.2 U/mg and protein concentration 0.32 mg/mL. In SDS PAGE, the approximate molecular mass was found at 66 kDa and further confirmed from an MS spectrum of MALDI-TOF. The purified MCO like laccase is capable of degradation of antibiotics such as tetracycline completely, whereas oxytetracycline (78%) and ampicillin (62%) degraded within 96 min without any redox mediators at pH 5 and 30 ºC. Its degradation pathway was based on identification of metabolites by LC-MS spectrum. The enzymatic degradation may be used in advanced treatment of antibiotics containing wastewater.

Copper increases laccase gene transcription and extracellular laccase activity in Pleurotus eryngii KS004.

The white-rot fungus Pleurotus eryngii secretes various laccases involved in the degradation of a wide range of chemical compounds. Since the laccase production is relatively low in fungi, many efforts have been focused on finding ways to increase it, so in this study, we investigated the effect of copper on the transcription of the pel3 laccase gene and extracellular laccase activity. The results indicate that adding 0.5 to 2 mM copper to liquid cultures of P. eryngii KS004 increased both pel3 gene transcription and extracellular laccase activity in a concentration-dependent manner. The most significant increase in enzyme activity occurred at 1 mM Cu2+, where the peak activity was 4.6 times higher than in control flasks. Copper also induced the transcription of the laccase gene pel3. The addition of 1.5 and 2 mM Cu2+ to fungal culture media elevated pel3 transcript levels to more than 13-fold, although the rate of induction slowed down at Cu2+ concentrations higher than 1.5 mM. Our findings suggest that copper acts as an inducer in the regulation of laccase gene expression in P. eryngii KS004. Despite its inhibitory effect on fungal growth, supplementing cultures with copper can lead to an increased extracellular laccase production in P. eryngii.

A systematic study on the characteristics and applications of laccases produced by fungi: insights on their potential for biotechnologies.

Laccases are polyphenol oxidase enzymes and form the enzyme complex known for their role in wood decomposition and lignin degradation. The present study aimed to systematically review the state-of-the-art trends in scientific publications on laccase enzymes of the last 10 years. The main aspects checked included the laccase-producing fungal genera, the conditions of fungal growth and laccase production, the methods of immobilization, and potential applications of laccase. After applying the systematic search method 177 articles were selected to compound the final database. Although various fungi produce laccase, most studies were Trametes and Pleurotus genera. The submerged fermentation (SmF) has been the most used, however, the use of solid-state fermentation (SSF) appeared as a promising technique to produce laccase when using agro-industrial residues as substrates. Studies on laccase immobilization showed the covalent bonding and entrapment methods were the most used, showing greater efficiency of immobilization and a high number of enzyme reuses. The main use of the laccase was in bioremediation, especially in the discoloration of dyes from the textile industry and the degradation of pharmaceutical waste. Implications and consequences of all these findings in biotechnology and environment, as well as the trends and gaps of laccase research were discussed.

Oxidation of chlortetracycline and its isomers by Botrytis aclada laccase in the absence of mediators: pH dependence and identification of transformation products by LC-MS.

Tetracyclines are antibiotics considered emerging pollutants and currently, wastewater treatment plants are not able to remove them efficiently. Laccases are promising enzymes for bioremediation because they can oxidize a wide variety of substrates. The aim of this study was to evaluate the Botrytis aclada laccase for the oxidation of chlortetracycline and its isomers in the absence of a mediator molecule, at a pH range between 3.0 to 7.0, and to characterize the transformation products by LC-MS. Chlortetracycline and three isomers were detected in both, controls and reaction mixtures at 0 h and in controls after 48 h of incubation but in different proportions depending on pH. An additional isomer was also detected, but only in the presence of BaLac. Based on the transformation products identified in the enzymatic reactions and information from literature, we assembled a network of transformation pathways starting from chlortetracycline and its isomers. The spectrometric analysis of the products indicated the probable occurrence of oxygen insertion, dehydrogenation, demethylation and deamination reactions. Four new products were identified, and we also described a novel transformation product without the chloro group. We observed that increasing pH led to higher diversity of main products. This is the first study using the laccase from fungi Botrytis aclada to oxidate chlortetracycline and its isomers and it can be considered as an ecological alternative to be used in bioremediation processes such as wastewater.

Thermosensitive polymer-assisted extraction and purification of fungal laccase from citrus pulp wash effluent.

BACKGROUND: This study explores the use of liquid-liquid extraction with thermosensitive polymers for producing laccase (Lac) from Pleurotus sajor-caju. This process leverages liquid waste from the citrus industry, specifically pulp wash. The research delves into extractive fermentation and thermoseparation, both processes being facilitated by a polymer exhibiting a lower critical solution temperature transition. RESULTS: Key factors considered include the choice of polymer, its concentration, pH, separation temperature, and the behavior of the polymer-rich phase post-extractive fermentation concerning the lower critical solution temperature. Notably, under conditions of 45% by weight of Pluronic L-61 and pH 5.0 at 25 °C, the Lac resulted in an enhancement in the purification factor of 28.4-fold, compared with the Lac obtained directly from the fermentation process on the eighth day. There was an 83.6% recovery of the Lac enzyme in the bottom phase of the system. Additionally, the unique properties of Pluronic L-61, which can induce phase separation and also allow for thermoseparation, led to a secondary fraction (aqueous solution) of Lac with purification factor of 2.1 ± 0.1-fold (at 32 ± 0.9 °C and 30 ± 0.3 min without stirring) from the polymeric phase (top phase). Fourier-transform infrared analysis validated the separation data, particularly highlighting the α-helix content in the amide I region (1600-1700 cm-1 ). CONCLUSION: In summary, the insights from this study pave the way for broader industrial applications of these techniques, underscoring benefits like streamlined process integration, heightened selectivity, and superior separation efficacy. © 2023 Society of Chemical Industry.

In silico and in vitro assays suggests Congo red dye degradation by a Lentinus sp. laccase enzyme.

Laccase is a superfamily of ligninolytic enzymes known to degrade a wide variety of xenobiotics, including synthetic dyes. Congo Red (CR) has a diazo dye function, carcinogenic and mutagenic potential, and is currently applied in clinical analysis. The objective of this work was to produce and characterize the crude extract of Lentinus sp. in semi-solid fermentation (FSS) and perform in vitro and in silico studies to assess the potential of the crude extract to discolor the CR dye. Laccase activity was determined using ABTS as substrate and characterized. The in vitro discoloration was carried out using experimental design 22 at room temperature and monitored at 340 nm for 24h. Molecular docking and molecular dynamics simulations were performed between laccase and CR. The maximum laccase activity production was 29.63 U L-1 with six days of FSS. The optimal temperature and pH were 50 °C and 3.0, respectively. Discoloration of the CR dye was obtained only in tests containing CuSO4. Laccase formed stable complexes with the dye, presenting negative binding energy values ranging from -70.94 to -63.16 kcal mol-1 and the occurrence of seven hydrogen bonds. Molecular dynamics results showed the stability of the system (RMSD ranging from 1.0 to 2.5 Ä) and protein-ligand interaction along simulation. RMSF values pointed residues at the end of chains A (residues 300 to 305, 480 to 500) and B (residues 650 to 655 and 950 to 1000) as the most flexible regions of the laccase. This study highlighted the enzymatic action in the bioremediation of CR in vitro in agreement with the in silico simulations that demonstrate the enzyme potential.Communicated by Ramaswamy H. Sarma.

Production of Extracellular Enzymes by Lentinula edodes Strains in Solid-State Fermentation on Lignocellulosic Biomass Sterilized by Physical and Chemical Methods.

Two methods of sterilization of lignocellulosic biomass were performed in this study. Eucalypt waste (EW) supplemented with rice bran (RB) was added in the proportions 80:20 and 90:10 in dry weight. The compositions were sterilized by physical method (autoclaving) and by chemical method (H2O2). The production of extracellular enzymes by Lentinula edodes strains was compared within the two methods. Inactivation of catalase present in RB was achieved with 250 mM H2O2. The use of H2O2, when compared by physical method, favored high production of hydrolytic enzymes such as endoglucanase (1,600 IU/kg), twofold higher, ß-glucosidase (1,000 IU/kg), fivefold higher, xylanase (55,000 IU/kg), threefold higher and ß-xylosidase (225 IU/kg), similar results. Oxidative enzymes, MnP and laccase, were produced within a different profile between strains, with shorter times for laccase (2,200 IU/kg) by SJC in 45 days and MnP (2,000 IU/kg) by CCB-514 in 30 days. High production of extracellular enzymes is achieved by the use of the chemical method of sterilization of lignocellulosic biomass; in addition to no energy consumption, this process is carried out in a shorter execution time when compared to the physical process. The use of H2O2 in sterilization does not produce toxic compounds from the degradation of hemicellulose and cellulose such as furfural and hydroxy-methyl-furfural that cause inhibition of microorganisms and enzymes.