RESUMO
A 38-year-old woman experienced a persistent dry cough and progressively worsening dyspnoea for 2 years. Spirometry testing revealed a moderate-to-severe restrictive abnormality. High-resolution chest computed tomography showed diffuse reticulonodular opacities. A lung biopsy disclosed alveolar parenchymal inflammation and fibrosis with bronchiolocentric features, prompting consideration of interstitial pneumonia. Following a thorough investigation of her occupational history and an on-site inspection, it was discovered that the patient had been grinding drill bits designed for printed circuit boards for 8 years, exposing her to hard metals. Mineralogical analyses confirmed excessive tungsten in urine, serum and hair, leading to a diagnosis of hard metal lung disease due to tungsten carbide-cobalt exposure. After discontinuing exposure and commencing corticosteroid therapy, her symptoms, pulmonary function and imaging showed modest improvement. This case highlights the significance of assessing occupational history in patients with interstitial pneumonia and understanding industrial hazards for accurate diagnosis and care.
Assuntos
Doenças Pulmonares Intersticiais , Doenças Profissionais , Exposição Ocupacional , Humanos , Feminino , Doenças Pulmonares Intersticiais/diagnóstico , Doenças Pulmonares Intersticiais/induzido quimicamente , Adulto , Exposição Ocupacional/efeitos adversos , Doenças Profissionais/diagnóstico , Tomografia Computadorizada por Raios X , Tungstênio/efeitos adversos , Ligas/efeitos adversos , Cobalto/efeitos adversos , Pulmão/patologia , Pulmão/diagnóstico por imagemRESUMO
After almost three-quarters of a century during which contact dermatologists have often struggled to comprehend the relationship between metal allergy and failure of metal-alloy containing implant, it is possible to say that a relationship does exist, particularly for cobalt and chromium, but also for nickel. There is still debate as to whether allergy develops as a consequent of failure but thenceforth contributes to it, or whether sensitisation starts first and induces failure secondarily-opinion probably favours the first. Metal-on-polypropylene articulations were associated with few metal allergic problems but now are less favoured by orthopaedists due to plastic wear products causing osteolysis and pseudotumour formation through local inflammation. New metal alloys are regularly being introduced such that interested dermatologists need to stay on top of the situation. The jury is still out as to whether the recent favouring of titanium-containing alloys will confirm them to be more inert allergenically. Case reports do show some clinical reactions to titanium-containing implants and patch test series have inferred sometimes quite a high background rate of allergy, but interpretation must be tempered by the awareness that titanium salts on patch testing have a tendency to cause irritant reactions. Blood monitoring of metal ion values is now recommended in certain situations after joint replacement and increasing levels may be an indication that allergy with joint failure can develop, in which case patch testing is indicated, and suggested series are available. Predictive patch testing, whilst generally not recommended in the past, has been introduced into some protocols often by non-dermatologists, such that it is now needed for temporo-mandibular joint and Nuss bar insertion, and it can be anticipated that this may become more commonplace in the future. One of the major current deficits for patch testers is standardised guidance on which preparation or preparations to use for suspected titanium allergy. One suggestion is 0.5% titanium sulphate in petrolatum, though experience in at least one centre suggests the use of a battery of titanium salts might be desirable.
Assuntos
Dermatite Alérgica de Contato , Hipersensibilidade , Humanos , Titânio/efeitos adversos , Sais , Dermatite Alérgica de Contato/complicações , Ligas/efeitos adversos , Metais , Hipersensibilidade/etiologiaRESUMO
Nickel is used in many cerebral endovascular treatment devices. However, nickel hypersensitivity is the most common metal allergy, and the relative risk of treatment in these patients is unknown. This retrospective analysis identified patients with nickel or metal allergies who underwent cerebral endovascular treatment with nickel-containing devices. Seven patients with nickel and/or other metal allergies underwent treatment with 9 nickel-containing devices. None experienced periprocedural complications. No patient received treatment with corticosteroids or antihistamines. At a mean clinical follow-up for all patients of 22.8 months (range, 10.5-38.0 months), no patients had symptoms attributable to nickel allergic reactions. The mean radiographic follow-up for all patients at 18.4 months (range, 2.5-37.5 months) showed successful treatment of the targeted vascular pathologies, with no evidence of in-stent stenosis or other allergic or hypersensitivity sequelae. The treatment of cerebrovascular lesions with a nickel-containing device resulted in no adverse outcomes among these patients and was safe and effective.
Assuntos
Transtornos Cerebrovasculares , Hipersensibilidade , Humanos , Níquel/efeitos adversos , Estudos Retrospectivos , Hipersensibilidade/etiologia , Hipersensibilidade/terapia , Hipersensibilidade/diagnóstico , Ligas/efeitos adversos , Transtornos Cerebrovasculares/complicaçõesRESUMO
BACKGROUND: Wear particles-induced osteolysis is a major long-term complication after total joint arthroplasty. Up to now, there is no effective treatment for wear particles-induced osteolysis except for the revision surgery, which is a heavy psychological and economic burden to patients. A metabolite of gut microbiota, short chain fatty acids (SCFAs), has been reported to be beneficial for many chronic inflammatory diseases. This study aimed to investigate the therapeutic effect of SCFAs on osteolysis. METHODS: A model of inflammatory osteolysis was established by applying CoCrMo alloy particles to mouse calvarium. After two weeks of intervention, the anti-inflammatory effects of SCFAs on wear particle-induced osteolysis were evaluated by Micro-CT analysis and immunohistochemistry staining. In vitro study, lipopolysaccharide (LPS) primed bone marrow-derived macrophages (BMDMs) and Tohoku Hospital Pediatrics-1 (THP-1) macrophages were stimulated with CoCrMo particles to activate inflammasome in the presence of acetate (C2), propionate (C3), and butyrate (C4). Western blotting, Enzyme-linked immunosorbent assay, and immunofluorescence were used to detect the activation of NLRP3 inflammasome. The effects of SCFAs on osteoclasts were evaluate by qRT-PCR, Western blotting, immunofluorescence, and tartrate-resistant acid phosphatase (TRAP) staining. Additionally, histone deacetylase (HDAC) inhibitors, agonists of GPR41, GPR43, and GPR109A were applied to confirm the underlying mechanism of SCFAs on the inflammasome activation of macrophages and osteoclastogenesis. RESULTS: C3 and C4 but not C2 could alleviate wear particles-induced osteolysis with fewer bone erosion pits (P < 0.001), higher level of bone volume to tissue volume (BV/TV, P < 0.001), bone mineral density (BMD, P < 0.001), and a lower total porosity (P < 0.001). C3 and C4 prevented CoCrMo alloy particles-induced ASC speck formation and nucleation-induced oligomerization, suppressing the cleavage of caspase-1 (P < 0.05) and IL-1ß (P < 0.05) stimulated by CoCrMo alloy particles. C3 and C4 also inhibited the generation of Gasdermin D-N-terminal fragment (GSDMD-NT) to regulate pyroptosis. Besides, C3 and C4 have a negative impact on osteoclast differentiation (P < 0.05) and its function (P < 0.05), affecting the podosome arrangement and morphologically normal podosome belts formation. CONCLUSION: Our work showed that C3 and C4 are qualified candidates for the treatment of wear particle-induced osteolysis.
Assuntos
Osteólise , Ligas/efeitos adversos , Animais , Butiratos/efeitos adversos , Humanos , Inflamassomos/efeitos adversos , Inflamassomos/metabolismo , Macrófagos/metabolismo , Camundongos , Osteogênese , Osteólise/tratamento farmacológico , Osteólise/metabolismo , Osteólise/prevenção & controle , Propionatos/efeitos adversos , PiroptoseRESUMO
INTRODUCTION: For an inguinal hernia repair, meshes with a continuous memory frame made it more easy to position the mesh in the preperitoneal space by anterior approach. We present a case of a sigmoid perforation caused by a fractured nitinol ring of a Rebound HRD Shield mesh. PATIENTS AND METHODS: A 29-years old sports instructor presented to the Emergency Department (ED) with a gnawing abdominal pain in the left lower quadrant. His past medical history noted an inguinal hernia repair on this side. A computed tomography scan showed a broken metal ring of the inguinal mesh perforating the sigmoid, so a laparoscopy was performed. The sigmoid was attached to the abdominal wall partially overlying the preperitoneal mesh and a part of the broken nitinol frame was found perforating the colon. RESULTS: The memory ring of the Rebound mesh is made of nitinol. An alloy well-known in vascular surgery for stenting arteries with high bending and compression forces. In this setting, fracture due to fatigue has already been described, but it is not known in abdominal wall reconstruction. Our patients groin was subject to daily bending and compression forces resulting in breakage of the nitinol ring. CONCLUSION: Particularly in young athletic patients the nitinol ring will be subject to bending forces in the groin and prone to breakage. This can have potentially severe consequences given its location near abdominal organs and neurovascular structures. In our opinion, patients should be informed about the possibility of ring breakage and doctors should consider the risk-benefits well.
Assuntos
Hérnia Inguinal , Laparoscopia , Adulto , Ligas/efeitos adversos , Colo Sigmoide/diagnóstico por imagem , Colo Sigmoide/cirurgia , Hérnia Inguinal/cirurgia , Herniorrafia/efeitos adversos , Humanos , Telas Cirúrgicas/efeitos adversosRESUMO
The local response of tissue triggered by implantation of degradable magnesium-based implant materials was investigated in vivo in a murine model. Pins (5.0 mm length by 0.5 mm diameter) made of Mg, Mg-10Gd, and Ti were implanted in the leg muscle tissue of C57Bl/6N mice (n = 6). Implantation was generally well tolerated as documented by only a mild short term increase in a multidimensional scoring index. Lack of difference between the groups indicated that the response was systemic and surgery related rather than material dependent. Longitudinal in vivo monitoring utilizing micro-computed tomography over 42 days demonstrated the highest and most heterogeneous degradation for Mg-10Gd. Elemental imaging of the explants by micro X-ray fluorescence spectrometry showed a dense calcium-phosphate-containing degradation layer. In order to monitor resulting surgery induced and/or implant material associated local cell stress, sphingomyelin based liposomes containing indocyanine green were administered. An initial increase in fluorescent signals (3-7 days after implantation) indicating cell stress at the site of the implantation was measured by in vivo fluorescent molecular tomography. The signal decreased until the 42nd day for all materials. These findings demonstrate that Mg based implants are well tolerated causing only mild and short term adverse reactions.
Assuntos
Implantes Absorvíveis , Ligas/análise , Magnésio/análise , Implantes Absorvíveis/efeitos adversos , Ligas/efeitos adversos , Ligas/metabolismo , Animais , Imageamento Tridimensional , Implantes Experimentais/efeitos adversos , Magnésio/efeitos adversos , Magnésio/metabolismo , Teste de Materiais , Camundongos Endogâmicos C57BL , Imagem Óptica , Espectrometria por Raios XRESUMO
Bone defects and diseases are devastating, and can lead to severe functional deficits or even permanent disability. Nevertheless, orthopedic implants and scaffolds can facilitate the growth of incipient bone and help us to treat bone defects and diseases. Currently, a wide range of biomaterials with distinct biocompatibility, biodegradability, porosity, and mechanical strength is used in bone-related research. However, most orthopedic implants and scaffolds have certain limitations and diverse complications, such as limited corrosion resistance, low cell proliferation, and bacterial adhesion. With recent advancements in materials science and nanotechnology, metallic and metallic oxide nanoparticles have become the subject of significant interest as they offer an ample variety of options to resolve the existing problems in the orthopedic industry. More importantly, these nanoparticles possess unique physicochemical and mechanical properties not found in conventional materials, and can be incorporated into orthopedic implants and scaffolds to enhance their antimicrobial ability, bioactive molecular delivery, mechanical strength, osteointegration, and cell labeling and imaging. However, many metallic and metallic oxide nanoparticles can also be toxic to nearby cells and tissues. This review article will discuss the applications and functions of metallic and metallic oxide nanoparticles in orthopedic implants and bone tissue engineering.
Assuntos
Ligas/uso terapêutico , Materiais Biocompatíveis/uso terapêutico , Nanopartículas Metálicas/uso terapêutico , Próteses e Implantes , Ligas/efeitos adversos , Materiais Biocompatíveis/efeitos adversos , Corrosão , Humanos , Nanopartículas Metálicas/efeitos adversos , Óxidos/efeitos adversos , Óxidos/uso terapêuticoRESUMO
AIMS: To investigate the healing process and nickel release of the Hyperion occluder (Comed BV, Netherlands), as compared to the Amplatzer septal occluder (ASO) (St. Jude Medical Inc., St. Paul, MN, USA) in a chronic swine model. BACKGROUND: Some long-term complications occurring after percutaneous atrial septal defect (ASD) closure may be partially associated with an inappropriate healing of the device and increased nickel release. There is no direct comparative study of different occluders for healing and nickel release. METHODS: After percutaneous ASD creation, 12 pigs were implanted with 15 mm Hyperion (n = 6) and 15 mm ASO (n = 6) devices. After 1 month (n = 3 for each device) and 3 months (n = 3 for each device) of follow-up, device explantation was performed and healing was assessed using histopathological workup. Systemic and tissular nickel release was performed. RESULTS: Implantation was successful in 100% without complications. Device coverage was observed as early as 1 month after implantation and was almost complete after 3 months. A granulation tissue with a predominantly mononuclear inflammatory reaction was observed in contact with nitinol wires while an inflammatory reaction was seen in contact with textile fibers. We found no statistically significant difference between the 2 devices whether for histological grading scores or systemic nickel release, regardless to follow-up duration. CONCLUSIONS: In this preclinical study, we demonstrated that Amplatzer septal occluder and Hyperion occluder were not significantly different for device healing and nickel release processes.
Assuntos
Ligas/farmacologia , Comunicação Interatrial/cirurgia , Efeitos Adversos de Longa Duração/induzido quimicamente , Teste de Materiais/métodos , Complicações Pós-Operatórias/induzido quimicamente , Implantação de Prótese , Dispositivo para Oclusão Septal/efeitos adversos , Ligas/efeitos adversos , Animais , Pesquisa Comparativa da Efetividade , Efeitos Adversos de Longa Duração/prevenção & controle , Níquel/efeitos adversos , Níquel/farmacologia , Avaliação de Resultados em Cuidados de Saúde , Complicações Pós-Operatórias/prevenção & controle , Desenho de Prótese , Implantação de Prótese/efeitos adversos , Implantação de Prótese/instrumentação , Suínos , Oligoelementos/efeitos adversos , Oligoelementos/farmacologia , Resultado do TratamentoRESUMO
OBJECTIVE: To assess in parous and nulliparous women, the efficacy, safety, and tolerability of a new, low-dose copper (175 mm) intrauterine contraceptive with a flexible nitinol frame provided in a preloaded applicator. METHODS: Institutional review boards at 12 U.S. sites approved this commercially funded project. Patients met standard inclusion and exclusion criteria for a copper-based intrauterine device (IUD), generally consistent with the Centers for Disease Control and Prevention's U.S. Medical Eligibility Criteria for Contraceptive Use, 2016. Intrauterine device placement occurred at any day in the eligible patient's menstrual cycle after assuring she was not pregnant. The primary outcome measure assessed efficacy (measured by the Pearl Index) in this 1-year study with a 2-year extension. Secondary outcomes included placement success, ease of placement, safety as measured by adverse events, and tolerability assessed by discontinuation rate and bleeding and spotting patterns. RESULTS: A total of 286 women provided 5,640 cycles evaluable for pregnancy. Patients averaged 27.1 years of age. Nulliparous women represented 60.8% of the patients. Over 36 months of observation, we identified two pregnancies (Pearl Index 0.46 [95% CI 0.06-1.67]) and 10 serious adverse events; none were study-related. Successful placement occurred in 283 participants (99.0%). Median (range) continuation times were 2.7 years (0-3.4). We identified five expulsions (1.8%), zero uterine perforations, and one report of pelvic inflammatory disease. Adverse events prompted 30 women (10.6%) to discontinue early in the first year of use with 23 (8.1%) discontinuing for issues of bleeding, pain, or both. Altogether, 107 (37.8%) completed 36 months of device use. Mean bleeding days per cycle decreased from 7.6 in cycle 1 to 5.2 in cycle 13. CONCLUSION: The novel, low-dose copper and nitinol IUD demonstrated high efficacy and safety in this phase 2 U.S. Food and Drug Administration trial and warrants further expanded study in a phase 3 clinical trial. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov, NCT02446821. FUNDING SOURCE: Sebela Pharmaceuticals, Inc.
Assuntos
Ligas/efeitos adversos , Dispositivos Intrauterinos de Cobre/efeitos adversos , Adolescente , Adulto , Feminino , Humanos , Resultado do Tratamento , Estados Unidos , Adulto JovemRESUMO
The purpose of the present study was to evaluate the mechanical strength and the absorption rate of WE43 material and to develop an absorbable metallic plate and screw for craniofacial application. The extruded WE43 plate and screw were evaluated using a LeFort I osteotomy canine model of 10 beagle dogs. Animals were divided into two groups: five dogs in the experimental group and five dogs in the control group. µCT was acquired at 4, 12, and 24 weeks. At 24 weeks after the operation, all animals were sacrificed, and histologic evaluation was performed. Swelling and gas formation were observed in three dogs in the experimental groups at 8 weeks. From 12 weeks, infraorbital fistula and inflammation were observed in three dogs in the experimental group, which gradually decreased and disappeared at 24 weeks. Other two dogs showed less gas formation at 12 weeks. The plates were completely absorbed, and gas formation was not observed at 24 weeks in these two dogs. New bone was well formed around the plates and screws in both groups. Histologic examination showed no specific differences between two groups. The mechanical strength of extruded WE43 was sufficient for mid-facial application. Plates and screws made with appropriately treated WE43 have the potential to be useful clinically.
Assuntos
Implantes Absorvíveis , Ligas/química , Placas Ósseas , Parafusos Ósseos , Compostos de Magnésio/química , Implantes Absorvíveis/efeitos adversos , Ligas/efeitos adversos , Animais , Corrosão , Anormalidades Craniofaciais/cirurgia , Cães , Fixação Interna de Fraturas , Compostos de Magnésio/efeitos adversos , Fenômenos Mecânicos , Suínos , Porco Miniatura , Microtomografia por Raio-XRESUMO
Beta-type Ti-based alloys are promising new materials for bone implants owing to their excellent mechanical biofunctionality and biocompatibility. For treatment of fractures in case of systemic diseases like osteoporosis the generation of implant surfaces which actively support the problematic bone healing is a most important aspect. This work aimed at developing suitable approaches for electrodeposition of Sr-substituted hydroxyapatite (Srx-HAp) coatings onto Ti-45Nb. Potentiodynamic polarization measurements in electrolytes with 1.67â¯mmol/L Ca(NO3)2, which was substituted by 0, 10, 50 and 100% Sr(NO3)2, and 1â¯mmol/L NH4H2PO4 at 333â¯K revealed the basic reaction steps for OH- and PO43- formation needed for the chemical precipitation of Srx-HAp. Studies under potentiostatic control confirmed that partial or complete substitution of Ca2+- by Sr2+-ions in solution has a significant effect on the complex reaction process. High Sr2+-ion contents yield intermediate phases and a subsequent growth of more refined Srx-HAp coatings. Upon galvanostatic pulse-deposition higher reaction rates are controlled and in all electrolytes very fine needle-like crystalline coatings are obtained. With XRD the incorporation of Sr-species in the hexagonal HAp lattice is evidenced. Coatings formed in electrolytes with 10 and 50% Sr-nitrate were chemically analyzed with EDX mapping and GD-OES depth profiling. Only a fraction of the Sr-ions in solution is incorporated into the Srx-HAp coatings. Therein, the Sr-distribution is laterally homogeneous but non-homogeneous along the cross-section. Increasing Sr-content retards the coating thickness growth. Most promising coatings formed in the electrolyte with 10% Sr-nitrate were employed for Ca, P and Sr release analysis in Tris-Buffered Saline (150â¯mM NaCl, pHâ¯7.6) at 310â¯K. At a sample surface: solution volume ratio of 1:200, after 24â¯h the amount of released Sr-ions was about 30-35% of that determined in the deposited Srx-HAp coating. In vitro studies with human bone marrow stromal cells (hBMSC) revealed that the released Sr-ions led to a significantly enhanced cell proliferation and osteogenic differentiation and that the Sr-HAp surface supported cell adhesion indicating its excellent cytocompatibility.
Assuntos
Ligas/química , Durapatita/química , Galvanoplastia/métodos , Estrôncio/química , Ligas/efeitos adversos , Durapatita/efeitos adversos , Humanos , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/efeitos dos fármacosRESUMO
Wear and corrosion damage of biomedical alloys alters the structure and electrochemical properties of the surface heterogeneously. It was hypothesized that local regions on the same surface systematically differ from one another in terms of their impedance characteristics. To test this hypothesis, CoCrMo disks exposed to electrosurgical and inflammatory-species-driven damage were characterized using a localized impedance technique, nearfield electrochemical impedance spectroscopy (NEIS), to assess point-specific surface integrity in response to applied damage. It was found that electrosurgical damage, as may arise during primary arthroplasty and revision surgeries, and hydrogen peroxide concentrations of 5-10 mM significantly alter the corrosion susceptibility of the local surface compared to the as-polished CoCrMo surface. A CoCrMo retrieved neck taper (Goldberg score of 4) was scored in different local regions on the basis of visual appearance, and it was found that there is a direct relationship between increasing debris coverage and decreasing impedance, with the global surface impedance closest to the most severely scored local region. This noninvasive method, which uses a millielectrode configuration to test localized regions, can measure the heterogeneous electrochemical impedance of an implant surface and be tailored to assess specific damage and corrosion mechanisms revealed on retrieval surfaces.
Assuntos
Ligas , Espectroscopia Dielétrica , Ligas/efeitos adversos , Corrosão , Reoperação , Propriedades de SuperfícieRESUMO
Titanium alloys are widely used in the biomedical field due to their excellent resistance to corrosion, high mechanical strength/density ratio, low elastic modulus, and good biocompatibility. Niobium is a ß-stabilizer element that has the potential to decrease elastic modulus and possesses excellent corrosion resistance. In this article, Ti-15Nb alloy was prepared via arc-melting, with the aim of using it in biomedical applications to replace implants that fail due to mechanical incompatibility with human bone. This Ti-15Nb alloy was structurally, chemically, and microstructurally characterized. Its mechanical properties were analyzed via Vickers microhardness and elastic modulus measurements. The cytotoxicity of the alloy was evaluated via direct and indirect MTT tests. In the direct MTT test, the cells were grown on alloy and in the indirect test, Ti-15Nb alloy extracts were prepared (1 g/1 mL at 310 K for 48 hours). The results of chemical composition showed that the alloy produced has good quality and low content of gaseous impurities, such as oxygen and nitrogen. The obtained results for structure and microstructure indicated the presence of the martensite α' phase. The microhardness of the Ti-15Nb alloy is superior to that of cp-Ti due to solid solution hardening, and the alloy has a better elastic modulus as compared to pure titanium. Cytotoxic effects were not observed. The Ti-15Nb alloy shows good results of mechanical properties and does not show cytotoxic effects. In addition, morphological variations were not found in the cells and good cell adhesion in all the studied conditions was observed. In general, the alloy proposed in this article has satisfactory characteristics as a biomedical material.
Assuntos
Ligas/química , Nióbio/química , Titânio/química , Ligas/efeitos adversos , Animais , Materiais Biocompatíveis/efeitos adversos , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/química , Linhagem Celular , Elasticidade , Dureza , Camundongos , Microscopia , Nióbio/efeitos adversos , Titânio/administração & dosagem , Difração de Raios XRESUMO
Objective: To investigate the incidence of contact dermatitis among workers in cemented carbide production enterprises. Methods: From October 1997 to October 2017, an occupational epidemiological survey was conducted on a large-scale cemented carbide production enterprise, and occupational health examinations were conducted for employees. 152 people were exposed to hard metal dust (hard metal raw material dust and alloy dust) . The employees in the work group were contact groups, and 142 employees in the non-dusting operation of the company were in the control group. A detailed retrospective survey of hard metal production workers with contact dermatitis history in the two groups was conducted to analyze the risk factors of contact dermatitis exposure to hard metal dust. Results: The incidence of allergic diseases in the exposed group was significantly higher than that in the control group. The difference was statistically significant (χ(2)=23.793, P<0.05) . The incidence of contact dermatitis in the exposed group was significantly higher than that in the control group. The difference was statistically significant (χ(2)=24.659, P<0.05) ; the changes of contact dermatitis in the contact group were mainly allergic contact dermatitis, and some showed irritative contact dermatitis; the operator had respiratory symptoms (including work-related nasal congestion, cough, wheezing) , difficulty breathing may be the influencing factors of contact dermatitis (RR=2.60, 95%CI: 1.10-6.20, P<0.05) . Conclusion: Hard metal alloy enterprises are exposed to hard metal dust. The incidence of contact dermatitis is high in workers, and the occurrence of contact dermatitis may be associated with those with respiratory symptoms.
Assuntos
Ligas/efeitos adversos , Cobalto/efeitos adversos , Dermatite de Contato/epidemiologia , Exposição Ocupacional/efeitos adversos , Tungstênio/efeitos adversos , Poeira , Humanos , Estudos RetrospectivosRESUMO
BACKGROUND: The occlusion devices used for repair of atrial septal defect and patent foramen ovale commonly contain nitinol, an alloy containing nickel. There are reports of nickel allergy in the context of intracardiac device implantation. Type IV delayed-type reactions likely predominate in intracardiac metal hypersensitivity, but there are potentially other mechanisms such as cytotoxic or innate immunity. Based on available literature to date, the significance of nickel allergy in intracardiac occluders remains unclear. OBJECTIVE: The aim of the study was to investigate nickel allergy management strategies in intracardiac occluders. METHODS: The American Contact Dermatitis Society facilitated distribution of a survey via e-mail to the members of its association, which included dermatologists and allergists/immunologists. A total of 70 individuals answered the survey. CONCLUSIONS: There was no consensus regarding the ability of patch testing to accurately determine allergic reactions within cardiac tissue. There was also no agreement on the criteria for patch testing in patients undergoing intracardiac implantation. However, most would inquire about a history of contact sensitivity to previously implanted devices. With a positive patch test, nickel-based intracardiac devices should be avoided, or the decision should be left to the discretion of the cardiologist.
Assuntos
Ligas/efeitos adversos , Dermatite Alérgica de Contato/prevenção & controle , Níquel/efeitos adversos , Dispositivo para Oclusão Septal/efeitos adversos , Estudos Transversais , Dermatite Alérgica de Contato/diagnóstico , Feminino , Forame Oval/cirurgia , Forame Oval Patente/terapia , Humanos , Testes do Emplastro/métodosRESUMO
In this study, a comprehensive analysis of a novel zinc alloy osteosynthesis system in a canine mandibular fracture model is presented. The efficacy of the system was compared for PLLA (poly-l-lactic acid) and titanium materials using X-ray radiography, micro-CT tomography, undecalcified bone histomorphometry, and a three-point bending test. Histology, blood normal, blood biochemical, and serum zinc concentration tests were also performed to assess the biosafety of the zinc alloy osteosynthesis system. The degradability of the zinc alloy was evaluated using a micro-CT and scanning electron microscope during the 24-week post operation period. The results showed that zinc alloy possesses good mechanical properties that support fracture healing. Its uniform and slow corrosion leads to adequate degradation behavior in 24â¯weeks. Additionally, the zinc alloy proved to be biocompatible, indicating that this novel osteosynthesis system is safe for use in the body. The results of the study demonstrate that this zinc alloy-based osteosynthesis system is a promising candidate for a new generation of osteosynthesis systems, with further improvements required in the future.
Assuntos
Ligas/efeitos adversos , Ligas/farmacologia , Fixação Interna de Fraturas , Zinco/efeitos adversos , Zinco/farmacologia , Animais , Fenômenos Biomecânicos , Placas Ósseas , Cães , Feminino , Testes Hematológicos , Masculino , Resultado do Tratamento , Microtomografia por Raio-X , Zinco/sangueRESUMO
Bioresorbable metallic implants are considered to be a new generation of transient fixation devices, which provide strong mechanical support during healing as well as effective integration with the host bone tissues, free of secondary surgery. We evaluated the microstructures and mechanical properties of ironmanganese alloys (Fe30Mn) with 0-, 5-, 10-, and 60-volume percent porosity, which was produced through ammonium bicarbonate (NH4HCO3) decomposition. We also investigated the influence of porosity concentration on the corrosion rate and cytotoxicity of the alloy. The average value of maximum compressive strength was 2-fold greater in the 0-vol% scaffolds than that in 60-vol% scaffolds. Scaffolds with 60-vol% porosity exhibited the highest average value of corrosion rate in a potentiodynamic polarization test among the four groups. However, the group influenced cellular viability negatively in a subsequent cytotoxicity test. Fe30Mn scaffolds with 10-vol% NH4HCO3 are considered promising resorbable scaffolds based on the results of compression tests, corrosion experiments and cytotoxicity studies.
Assuntos
Ligas , Fenômenos Mecânicos , Ligas/efeitos adversos , Ligas/química , Ligas/uso terapêutico , Animais , Morte Celular/efeitos dos fármacos , Sobrevivência Celular , Força Compressiva , Corrosão , Módulo de Elasticidade , Humanos , Íons , Masculino , Manganês/análise , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Camundongos , Fenômenos Ópticos , Oxirredução , Porosidade , Difração de Raios X , Adulto JovemRESUMO
Absorbable metallic implants have been under investigation for more than a century. Animal and human studies have shown that magnesium (Mg) alloys can be safely used in bioresorbable scaffolds. Several cardiovascular and orthopedic biodegradable metallic devices have recently been approved for use in humans. Bioresorbable Mg implants present many advantages when compared to bioabsorbable polymer or nonabsorbable metallic implants, including similar strength and mechanical properties as existing implant-grade metals without the drawbacks of permanence or need for implant removal. Imaging visibility is also improved compared to polymeric devices. Additionally, with Mg-based cardiovascular stents, the risk of late stent thrombosis and need for long-term anti-platelet therapy may be reduced as the host tissue absorbs the Mg degradation products and the morphology of the vessel returns to a near-normal state. Absorbable Mg implants present challenges in the conduct of preclinical animal studies and interpretation of pathology data due to their particular degradation process associated with gas production and release of by-products. This article will review the different uses of Mg implants, the Mg alloys, the distinctive degradation features of Mg, and the challenges confronting pathologists at tissue collection, fixation, imaging, slide preparation, evaluation, and interpretation of Mg implants.
Assuntos
Ligas/efeitos adversos , Materiais Biocompatíveis/efeitos adversos , Segurança de Equipamentos/métodos , Magnésio/efeitos adversos , Teste de Materiais/métodos , Próteses e Implantes/efeitos adversos , Ligas/química , Animais , Materiais Biocompatíveis/normas , Segurança de Equipamentos/instrumentação , Imageamento Tridimensional , Magnésio/química , Teste de Materiais/instrumentação , Próteses e Implantes/normasRESUMO
Biodegradable magnesium (Mg) alloys exhibit improved mechanical properties compared to degradable polymers while degrading in vivo circumventing the complications of permanent metals, obviating the need for surgical removal. This study investigated the safety and efficacy of Mg-Y-Zn-Zr-Ca (WZ42) alloy compared to non-degradable Ti6Al4V over a 14-week follow-up implanted as pins to fix a full osteotomy in rat femurs and as wires wrapped around the outside of the femurs as a cerclage. We used a fully load bearing model allowing implants to intentionally experience realistic loads without immobilization. To assess systemic toxicity, blood cell count and serum biochemical tests were performed. Livers and kidneys were harvested to observe any accumulation of alloying elements. Hard and soft tissues adjacent to the fracture site were also histologically examined. Degradation behavior and bone morphology were determined using micro-computed tomography scans. Corrosion occurred gradually, with degradation seen after two weeks of implantation with points of high stress observed near the fracture site ultimately resulting in WZ42 alloy pin fracture. At 14 weeks however, normal bone healing was observed in femurs fixed with the WZ42 alloy confirmed by the presence of osteoid, osteoblast activity, and new bone formation. Blood testing exhibited no significant changes arising from the WZ42 alloy compared to the two control groups. No recognizable differences in the morphology and more importantly, no accumulation of Mg, Zn, and Ca in the kidney and liver of rats were observed. These load bearing model results collectively taken, thus demonstrate the feasibility for use of the Mg-Y-Zn-Zr-Ca alloy for long bone fracture fixation applications.
Assuntos
Implantes Absorvíveis , Ligas/uso terapêutico , Pinos Ortopédicos , Fraturas do Fêmur/cirurgia , Implantes Absorvíveis/efeitos adversos , Ligas/efeitos adversos , Animais , Materiais Biocompatíveis/efeitos adversos , Materiais Biocompatíveis/uso terapêutico , Pinos Ortopédicos/efeitos adversos , Cálcio/efeitos adversos , Cálcio/uso terapêutico , Corrosão , Feminino , Fraturas do Fêmur/patologia , Fraturas do Fêmur/terapia , Fêmur/patologia , Fêmur/cirurgia , Teste de Materiais , Ratos Sprague-Dawley , Titânio/efeitos adversos , Titânio/uso terapêuticoRESUMO
Hard metal lung disease (HMLD) is a pneumoconiosis caused by occupational exposure to hard metals such as tungsten carbide and cobalt, but the treatment strategies for HMLD have not been well established. A 68-year-old Japanese man with occupational history as a grinder of hard metals for 18 years referred to our hospital because of dry cough and dyspnea. A chest computed tomography (CT) on admission revealed centrilobular micronodules, ground-glass opacities, and reticular opacities in the peripheral zone of both lungs. Mineralogic analyses of lung tissues detected components of hard metals, such as tungsten, titanium and iron, and the same metals were also detected in the sample of the dust of his workplace. Thus, the patient was diagnosed as having HMLD based on occupational exposure history and radiologic and mineralogic analyses of the lung. Corticosteroid therapy was initiated, which resulted in partial improvements in his symptoms, radiological and pulmonary functional findings. In a review of the 18 case reports of HMLD treated with corticosteroids, including our case, the majority of patients (77.8%) showed favorable responses to corticosteroid treatment. Furthermore, the presence of fibrotic changes, such as reticular opacity, in radiological examinations was associated with the resistance to corticosteroids. In conclusion, the majority of patients with HMLD are expected to favorable response to corticosteroid treatment, whereas chest CT findings such as fibrotic changes may be predictive of the resistance of corticosteroid treatment. Lastly, proper prevention of hard metal exposure is most important as the first step.