Effects of 2,6-di-tert-butyl-hydroxytotulene and mineral-lubricant base oils on microbial communities during lubricants biodegradation.

2,6-Di-tert-butyl-hydroxytotulene (BHT) is an additive commonly used in the manufacturing of lubricants to improve their antioxidant properties. However, in this study, we found that BHT affects the biodegradation of bio-lubricants by influencing the microbial community during the degradation of bio-lubricants. Specifically, BHT was found to reduce bacterial richness in activated sludge, but it increased the relative abundance of Actinobacteria (from 21.24% to 40.89%), Rhodococcus (from 17.15% to 31.25%), Dietzia (from 0.069% to 6.49%), and Aequorivita (from 0.90% to 1.85%). LEfSe analysis and co-occurrence network analysis suggested that Actinobacteria could be potential biomarkers and keystone taxa in microbial communities. Using the MetaCyc pathway database, the study found that BHT interfered with cellular biosynthetic processes. Additionally, the study also showed that mineral-lubricant base oils, which are difficult to degrade, significantly altered the diversity and composition of the microbiome. Overall, the findings demonstrate that BHT and mineral-lubricant base oils can substantially alter bacterial richness, structure, and function, potentially contributing to the difficulty in degrading lubricants. These findings have implications for the development of more biodegradable lubricants and the management of industrial waste containing lubricants.

The production of wax esters in transgenic plants: towards a sustainable source of bio-lubricants.

Wax esters are high-value compounds used as feedstocks for the production of lubricants, pharmaceuticals, and cosmetics. Currently, they are produced mostly from fossil reserves using chemical synthesis, but this cannot meet increasing demand and has a negative environmental impact. Natural wax esters are also obtained from Simmondsia chinensis (jojoba) but comparably in very low amounts and expensively. Therefore, metabolic engineering of plants, especially of the seed storage lipid metabolism of oil crops, represents an attractive strategy for renewable, sustainable, and environmentally friendly production of wax esters tailored to industrial applications. Utilization of wax ester-synthesizing enzymes with defined specificities and modulation of the acyl-CoA pools by various genetic engineering approaches can lead to obtaining wax esters with desired compositions and properties. However, obtaining high amounts of wax esters is still challenging due to their negative impact on seed germination and yield. In this review, we describe recent progress in establishing non-food-plant platforms for wax ester production and discuss their advantages and limitations as well as future prospects.

Immobilized lipase-catalyzed transesterification for synthesis of biolubricant from palm oil methyl ester and trimethylolpropane.

The present study reports the effects of three commercial immobilized lipases namely Novozyme 435 from Candida antarctica lipase B (CALB), Lipozyme TL IM from Thermomyces lanuginosus and Lipozyme RM IM from Rhizomucor miehei on the production of trimethylolpropane (TMP) ester from high oleic palm methyl ester (HO-PME) and TMP. The TMP ester is a promising base oil for biolubricants that are easily biodegradable and non-toxic to humans and the environment. Enzymatic catalysts are insensitive to free fatty acid (FFA) content, hence able to mitigate the side reactions and consequently reduce product separation cost. The potential of these enzymes to produce TMP ester in a solvent-free medium was screened at various reaction time (8, 23, 30 and 48 h), operating pressure (0.1, 0.3 and 1.0 mbar) and enzyme dosage (1, 3, 5 and 10% w/w). The reaction was conducted at a constant temperature of 70 °C and a molar ratio of 3.9:1 (HO-PME: TMP). Novozyme 435 produced the highest yield of TMP ester of 95.68 ± 3.60% under the following conditions: 23 h reaction time, 0.1 mbar operating pressure and 5% w/w of enzyme dosage. The key lubrication properties of the produced TMP ester are viscosity index (208 ± 2), pour point (- 30 ± - 2 °C), cloud point (- 15 ± - 2 °C), onset thermal degradation temperature (427.8 °C), and oxidation stability, RPVOT (42 ± 4 min). The properties of the TMP ester produced from the enzymatic transesterification are comparable to other vegetable oil-based biolubricants produced by chemical transesterification.

A new Rhodococcus aetherivorans strain isolated from lubricant-contaminated soil as a prospective phenol-biodegrading agent.

Microbe-based decontamination of phenol-polluted environments has significant advantages over physical and chemical approaches by being relatively cheaper and ensuring complete phenol degradation. There is a need to search for commercially prospective bacterial strains that are resistant to phenol and other co-pollutants, e.g. oil hydrocarbons, in contaminated environments, and able to carry out efficient phenol biodegradation at a variable range of concentrations. This research characterizes the phenol-biodegrading ability of a new actinobacteria strain isolated from a lubricant-contaminated soil environment. Phenotypic and phylogenetic analyses showed that the novel strain UCM Ac-603 belonged to the species Rhodococcus aetherivorans, and phenol degrading ability was quantitatively characterized for the first time. R. aetherivorans UCM Ac-603 tolerated and assimilated phenol (100% of supplied concentration) and various hydrocarbons (56.2-94.4%) as sole carbon sources. Additional nutrient supplementation was not required for degradation and this organism could grow at a phenol concentration of 500 mg L-1 without inhibition. Complete phenol assimilation occurred after 4 days at an initial concentration of 1750 mg L-1 for freely-suspended cells and at 2000 mg L-1 for vermiculite-immobilized cells: 99.9% assimilation of phenol was possible from a total concentration of 3000 mg L-1 supplied at daily fractional phenol additions of 750 mg L-1 over 4 days. In terms of phenol degradation rates, R. aetherivorans UCM Ac-602 showed efficient phenol degradation over a wide range of initial concentrations with the rates (e.g. 35.7 mg L-1 h-1 at 500 mg L-1 phenol, and 18.2 mg L-1 h-1 at 1750 mg L-1 phenol) significantly exceeding (1.2-5 times) reported data for almost all other phenol-assimilating bacteria. Such efficient phenol degradation ability compared to currently known strains and other beneficial characteristics of R. aetherivorans UCM Ac-602 suggest it is a promising candidate for bioremediation of phenol-contaminated environments.

Non-edible vegetable oil-based feedstocks capable of bio-lubricant production for automotive sector applications-a review.

Fossil fuel resource is on the draining stage which leads to an increment in the cost of the petroleum products. Nowadays, research is focused on the development of environment-friendly lubricants which are derivatives of renewable sources. Bio-lubricants based on non-edible oil sources are environmentally friendly because they are non-hazardous and biodegradable and no emission of toxic gases were detected when they are used. This study involves the characterizations and advantages, as well as utilization of inedible plant oil-driven bio-lubricants as an alternative for tribological applications. This report also presents the status of the global lubricant market as well as the potential outlook of the bio-lubricants for their future usage. Non-edible plant oil-driven bio-lubricants bear high viscosity, high lubricity, and high viscosity index which can enhance the equipment service life and deserve the ability to carry the high load and results in a minimum amount of metal traces during combustion while applied to engines. Beside their advantages, some of the disadvantages are also there which can be addressed by the employment of certain additives available according to the applications. The detailed study about the different additives utilized during their use in the internal combustion engine is also described in detail during this study. This study provides a detailed description of the possibilities associated with bio-lubricant based on non-edible oil feedstocks to the automotive sector applications.

Temporal effects of cytokine treatment on lubricant synthesis and matrix metalloproteinase activity of fibroblast-like synoviocytes.

Fibroblast-like synoviocytes (FLS) are major contributors to the composition and function of synovial fluid (SF). In disease, changes to important SF molecules such as hyaluronic acid (HA), lubricin, and numerous inflammatory markers contribute to a loss of SF functional properties. Previous studies characterized the ability of FLS to produce SF molecules in short-term cultures using continuous cytokine supplementation. This study assessed the HA, lubricin, and matrix metalloproteinase-2 (MMP-2) secretion profile of FLS over 12 days of culture. FLS were subjected to continuous, intermittent, and sequential cytokine treatments of interleukin-1 beta (IL-1ß), tumour necrosis factor-alpha (TNF-α), and transforming growth factor-beta 1 (TGF-ß1). HA was assessed by an enzyme-linked immunosorbent assay (ELISA) for content and agarose gel electrophoresis for molecular weight distribution. Relative lubricin content was determined by western blot. Pro MMP-2 and active MMP-2 were quantified by gelatin zymography. All intermittent and sequential treatments significantly increased secretion of high-molecular-weight (>3 MDa) HA for the duration of the culture. Sequentially treated groups elevated lubricin synthesis, whereas only groups receiving IL-1ß and TNF-α for 2 days followed by TGF-ß1 for 1 day reduced active MMP-2 to unstimulated control levels. These data provide important information on the long-term functional potential of cytokine-stimulated FLS and suggest that temporal regulation of cytokine exposure can be a powerful tool to guide healthy synovial secretions.

Tuning culturing conditions towards the production of neutral lipids from lubricant-based wastewater in open mixed bacterial communities.

Production of bacterial lipid-based biofuels using inexpensive substrates, as wastes, is an emerging approach. In this work, a selective process using carbon feast-famine cycles was applied to obtain an indigenous microbial community of hydrocarbon-degrading and lipid-accumulating bacteria, using a real lubricant-based wastewater as carbon source. In the conditions applied, the enriched bacterial community, dominated by members of the genus Rhodococcus, Pseudomonas and Acinetobacter, was able to degrade almost all hydrocarbons present in the wastewater within 24 h' incubation and to accumulate, although in low levels, triacylglycerol (TAG) (<5% of cell dry weight (CDW)) and polyhydroxyalkanoates (PHA) (3.8% ±â€¯1.1% of the CDW) as well as an unknown lipid (29% ±â€¯6% of CDW), presumably a wax ester-like compound. The influence of culture conditions, namely carbon and nitrogen concentrations (and C/N ratio) and cultivation time, on the amount and profile of produced storage compounds was further assessed using a statistical approach based on a central composite circumscribed design and surface response methodology. The regression analysis of the experimental design revealed that only nitrogen concentration and C/N ratio are significant for neutral lipid biosynthesis (p < 0.05). Maximum neutral lipid content, i.e. 33% (CDW basis), was achieved for the lowest carbon and nitrogen concentrations evaluated (10 g COD L-1 and 0.02 g N L-1). PHA accounted for less than 5% of CDW. In these conditions, neutral lipid content was mainly composed by TAG, about 70% (w/w). TAG precursors, namely monoacylglycerols (MAG), diacylglycerols (DAG) and fatty acids (FA), accounted for 22% of total neutral lipids and WE for about 7%. Nevertheless, according to the applied response surface model, further improvement of neutral lipids content is still possible if even lower nitrogen concentrations are used. The fatty acids detected in TAG extracts ranged from myristic acid (C14:0) to linoleic acid (C18:2), being the most abundant palmitic acid (C16:0), stearic acid (C18:0) and oleic acid (C18:1). This study shows the feasibility of combining treatment of hydrocarbon contaminated wastewater, herein demonstrated for lubricant-based wastewater, with the production of bacterial neutral lipids using open mixed bacterial communities. This approach can decrease the costs associated to both processes and contribute to a more sustainable waste management and production of lipid-based biofuels.

Ocular surface lubricants.

PURPOSE OF REVIEW: The purpose of this article is to provide an overview of the ocular lubricants currently available, consider the components of the various formulations and highlight the status of preservative use in the treatment of anterior ocular surface diseases. RECENT FINDINGS: The primary components of ocular surface lubrication have been, in the past, based on various cellulose formulations that increase hydration. Advances in lubrication have come from areas of the human body requiring lubrication such as the skeletal joints as well as examining the use of natural components of the tear fluid. These have resulted in novel modifications of existing tear components, for example, thiolated carboxymethyl hyaluronic acid which creates crosslinking to mechanically increase retention time for ocular surface hydration. Other proteoglycans such as lubricin, having one of the lowest coefficients of friction in nature, to a lipopolysaccharide derivative of tamarind seed, may provide a unique delivery system for lubricants and medications. SUMMARY: The present state of ocular surface lubrication is slowly advancing from the routine use of cellulose-based solutions and gels to more advanced replacement with natural tear components. The advances that are occurring on other lubricating surfaces of the musculoskeletal system are also providing some insights into potential use on the ocular surface.

Structural, tribological, and mechanical properties of the hind leg joint of a jumping insect: Using katydids to inform bioinspired lubrication systems.

This study investigates the structural properties of the hind leg femur-tibia joint in adult katydids (Orthoptera: Tettigoniidae), including its tribological and mechanical properties. It is of particular interest because the orthopteran (e.g., grasshoppers, crickets, and katydids) hind leg is highly specialized for jumping. We show that the katydid hind leg femur-tibia joint had unique surfaces and textures, with a friction coefficient (µ) at its coupling surface of 0.053±0.001. Importantly, the sheared surfaces at this joint showed no sign of wear or damage, even though it had undergone thousands of external shearing cycles. We attribute its resiliency to a synergistic interaction between the hierarchical surface texture/pattern on the femoral surfaces, a nanograded internal nanostructure of articulating joints, and the presence of lubricating lipids on the surface at the joint interface. The micro/nanopatterned surface of the katydid hind leg femur-tibia joint enables a reduction in the total contact area, and this significantly reduces the adhesive forces between the coupling surfaces. In our katydids, the femur and tibia joint surfaces had a maximum effective elastic modulus (Eeff) value of 2.6GPa and 3.9GPa, respectively. Presumably, the decreased adhesion through the reduction of van der Waals forces prevented adhesive wear, while the contact between the softer textured surface and harder smooth surface avoided abrasive wear. The results from our bioinspired study offer valuable insights that can inform the development of innovative coatings and lubrication systems that are both energy efficient and durable. STATEMENT OF SIGNIFICANCE: Relative to body length, insects can outjump most animals. They also accelerate their bodies at a much faster rate. Orthopterans (e.g., grasshoppers, crickets, and katydids) have hind legs that are specialized for jumping. Over an individual's lifetime, the hind leg joint endures repeated cycles of flexing and extending, including jumping, and its efficiency and durability easily surpass that of most mechanical devices. Although the efficient functioning of insect joints has long been recognized, the mechanism by which insect joints experience friction/adhesion/wear, and operate efficiently/reliably is still largely unknown. Our study on the structural, tribological, and mechanical properties of the orthopteran hind leg joints reveals the potential of katydid bioinspired research leading to more effective coatings and lubrication systems.

Dermal penetration and resorption of beta-naphthylamine and N-phenyl-beta-naphthylamine from lubricants in an ex vivo human skin model.

Dermal Penetration of aromatic amines (AA's), often suspected or known to be carcinogenic, can play an important role in the overall human exposure. However, information on penetration of certain AA's is poor and inconsistent. Penetration of the former lubricant additive N-phenyl-beta-naphthylamine (PBNA) and its contaminant beta-naphthylamine (BNA) a known carcinogen was investigated and the influence of formulation and co-application characterized. Percutaneous penetration of BNA and PBNA through freshly excised human skin (n = 8; 48 h) was investigated using an ex vivo diffusion cell model. Both AA's were applied in a technical-conform lubricant or dissolved in hexane. The amount of BNA and PBNA applied to skin was 0.52 and 259 µg/0.64 cm2. The analytical determination of AA's was performed by GC-MS. Both, BNA and PBNA penetrated through human skin (38 vs. 5% of applied dose). In contrast to BNA, the percutaneous penetration of PBNA continued beyond the end of exposure. Co-exposure of both AA's increased the intradermal uptake of BNA and PBNA (p < 0.05). Exposure in lubricant showed the least overall penetration (2.9 and 1.9% of applied dose). The results clearly reveal that dermal penetration of both AA's depends strongly on the mode of application. Co-application and formulation alters the penetration of the AA's.

Changes in bacterial diversity associated with bioremediation of used lubricating oil in tropical soils.

Used lubricating oil (ULO) is a widespread contaminant, particularly throughout tropical regions, and may be a candidate for bioremediation. However, little is known about the biodegradation potential or basic microbial ecology of ULO-contaminated soils. This study aims to determine the effects of used ULO on bacterial community structure and diversity. Using a combination of culture-based (agar plate counts) and molecular techniques (16S rRNA gene sequencing and DGGE), we investigated changes in soil bacterial communities from three different ULO-contaminated soils collected from motorcycle mechanical workshops (soil A, B, and C). We further explored the relationship between bacterial community structure, physiochemical soil parameters, and ULO composition in three ULO-contaminated soils. Results indicated that the three investigated soils had different community structures, which may be a result of the different ULO characteristics and physiochemical soil parameters of each site. Soil C had the highest ULO concentration and also the greatest diversity and richness of bacteria, which may be a result of higher nutrient retention, organic matter and cation exchange capacity, as well as freshness of oil compared to the other soils. In soils A and B, Proteobacteria (esp. Gammaproteobacteria) dominated the bacterial community, and in soil C, Actinobacteria and Firmicutes dominated. The genus Enterobacter, a member of the class Gammaproteobacteria, is known to include ULO-degraders, and this genus was the only one found in all three soils, suggesting that it could play a key role in the in situ degradation of ULO-contaminated tropical Thai soils. This study provides insights into our understanding of soil microbial richness, diversity, composition, and structure in tropical ULO-contaminated soils, and may be useful for the development of strategies to improve bioremediation.

Bioremediation of diesel and lubricant oil-contaminated soils using enhanced landfarming system.

Lubricant and diesel oil-polluted sites are difficult to remediate because they have less volatile and biodegradable characteristics. The goal of this research was to evaluate the potential of applying an enhanced landfarming to bioremediate soils polluted by lubricant and diesel. Microcosm study was performed to evaluate the optimal treatment conditions with the addition of different additives (nutrients, addition of activated sludge from oil-refining wastewater facility, compost, TPH-degrading bacteria, and fern chips) to enhance total petroleum hydrocarbon (TPH) removal. To simulate the aerobic landfarming biosystem, air in the microcosm headspace was replaced once a week. Results demonstrate that the additives of activated sludge and compost could result in the increase in soil microbial populations and raise TPH degradation efficiency (up to 83% of TPH removal with 175 days of incubation) with initial (TPH = 4100 mg/kg). The first-order TPH degradation rate reached 0.01 1/d in microcosms with additive of activated sludge (mass ratio of soil to inocula = 50:1). The soil microbial communities were determined by nucleotide sequence analyses and 16S rRNA-based denatured gradient gel electrophoresis. Thirty-four specific TPH-degrading bacteria were detected in microcosm soils. Chromatograph analyses demonstrate that resolved peaks were more biodegradable than unresolved complex mixture. Results indicate that more aggressive remedial measures are required to enhance the TPH biodegradation, which included the increase of (1) microbial population or TPH-degrading bacteria, (2) biodegradable carbon sources, (3) nutrient content, and (4) soil permeability.

Preparation of a biocatalyst via physical adsorption of lipase from Thermomyces lanuginosus on hydrophobic support to catalyze biolubricant synthesis by esterification reaction in a solvent-free system.

Lipase from Thermomyces lanuginosus (TLL) was immobilized on mesoporous hydrophobic poly-methacrylate (PMA) particles via physical adsorption (interfacial activation of the enzyme on the support). The influence of initial protein loading (5-200mg/g of support) on the catalytic properties of the biocatalysts was determined in the hydrolysis of olive oil emulsion and synthesis of isoamyl oleate (biolubricant) by esterification reaction. Maximum adsorbed protein loading and hydrolytic activity were respectively ≈100mg/g and ≈650 IU/g using protein loading of 150mg/g of support. The adsorption process followed the Langmuir isotherm model (R(2)=0.9743). Maximum ester conversion around 85% was reached after 30min of reaction under continuous agitation (200rpm) using 2500mM of each reactant in a solvent-free system, 45°C, 20%m/v of the biocatalyst prepared using 100mg of protein/g of support. Apparent thermodynamic parameters of the esterification reaction were also determined. Under optimal experimental conditions, reusability tests of the biocatalyst (TLL-PMA) after thirty successive cycles of reaction were performed. TLL-PMA fully retained its initial activity up to twenty two cycles of reaction, followed by a slight decrease around 8.6%. The nature of the product (isoamyl oleate) was confirmed by attenuated total reflection Fourier transform infrared (ATR-FTIR), proton ((1)H NMR) and carbon ((13)C NMR) nuclear magnetic resonance spectroscopy analyses.

Evidence of a molecular boundary lubricant at snakeskin surfaces.

During slithering locomotion the ventral scales at a snake's belly are in direct mechanical interaction with the environment, while the dorsal scales provide optical camouflage and thermoregulation. Recent work has demonstrated that compared to dorsal scales, ventral scales provide improved lubrication and wear protection. While biomechanic adaption of snake motion is of growing interest in the fields of material science and robotics, the mechanism for how ventral scales influence the friction between the snake and substrate, at the molecular level, is unknown. In this study, we characterize the outermost surface of snake scales using sum frequency generation (SFG) spectra and near-edge X-ray absorption fine structure (NEXAFS) images collected from recently shed California kingsnake (Lampropeltis californiae) epidermis. SFG's nonlinear optical selection rules provide information about the outermost surface of materials; NEXAFS takes advantage of the shallow escape depth of the electrons to probe the molecular structure of surfaces. Our analysis of the data revealed the existence of a previously unknown lipid coating on both the ventral and dorsal scales. Additionally, the molecular structure of this lipid coating closely aligns to the biological function: lipids on ventral scales form a highly ordered layer which provides both lubrication and wear protection at the snake's ventral surface.

Biosurfactant Production by Bacillus salmalaya for Lubricating Oil Solubilization and Biodegradation.

This study investigated the capability of a biosurfactant produced by a novel strain of Bacillus salmalaya to enhance the biodegradation rates and bioavailability of organic contaminants. The biosurfactant produced by cultured strain 139SI showed high physicochemical properties and surface activity in the selected medium. The biosurfactant exhibited a high emulsification index and a positive result in the drop collapse test, with the results demonstrating the wetting activity of the biosurfactant and its potential to produce surface-active molecules. Strain 139SI can significantly reduce the surface tension (ST) from 70.5 to 27 mN/m, with a critical micelle concentration of 0.4%. Moreover, lubricating oil at 2% (v/v) was degraded on Day 20 (71.5). Furthermore, the biosurfactant demonstrated high stability at different ranges of salinity, pH, and temperature. Overall, the results indicated the potential use of B. salmalaya 139SI in environmental remediation processes.

Articular Joint Lubricants during Osteoarthritis and Rheumatoid Arthritis Display Altered Levels and Molecular Species.

BACKGROUND: Hyaluronic acid (HA), lubricin, and phospholipid species (PLs) contribute independently or together to the boundary lubrication of articular joints that is provided by synovial fluid (SF). Our study is the first reporting quantitative data about the molecular weight (MW) forms of HA, lubricin, and PLs in SF from cohorts of healthy donors, patients with early (eOA)- or late (lOA)-stage osteoarthritis (OA), and patients with active rheumatoid arthritis (RA). METHODS: We used human SF from unaffected controls, eOA, lOA, and RA. HA and lubricin levels were measured by enzyme-linked immunosorbent assay. PLs was quantified by electrospray ionization tandem mass spectrometry. Fatty acids (FAs) were analyzed by gas chromatography, coupled with mass spectrometry. The MW distribution of HA was determined by agarose gel electrophoresis. RESULTS: Compared with control SF, the concentrations of HA and lubricin were lower in OA and RA SF, whereas those of PLs were higher in OA and RA SF. Moreover, the MW distribution of HA shifted toward the lower ranges in OA and RA SF. We noted distinct alterations between cohorts in the relative distribution of PLs and the degree of FA saturation and chain lengths of FAs. CONCLUSIONS: The levels, composition, and MW distribution of all currently known lubricants in SF--HA, lubricin, PLs--vary with joint disease and stage of OA. Our study is the first delivering a comprehensive view about all joint lubricants during health and widespread joint diseases. Thus, we provide the framework to develop new optimal compounded lubricants to reduce joint destruction.

Enhancing trimethylolpropane esters synthesis through lipase immobilized on surface hydrophobic modified support and appropriate substrate feeding methods.

Candida sp. 99-125 lipase immobilized on surface hydrophobic modified support and appropriate substrate feeding methods were used to improve the synthesis of tri-substituted trimethylolpropane (TMP) esters, which can be used as raw materials for biodegradable lubricants. The proposed novel production method is environmentally friendly. Lipase was adsorbed on surface hydrophobic silk fibers that were pretreated by amino-modified polydimethylsiloxane. A 5-level-4-factors central composite model, including reaction time, temperature, enzyme amount, and molar ratio of fatty acid to TMP, was designed to evaluate the interaction of process variables in the enzymatic esterification. The water activity was kept constant using a LiCl-saturated salt solution. Under the optimum conditions with 30% enzyme amount and substrates molar ratio 8.4 at 45°C for 47h, the total conversion of caprylic acid is 97.3% and the yield of tri-substituted TMP esters is 95.5%. The surface hydrophobic treatment resulted in less cluster water accumulated on the surface immobilized lipase, which was demonstrated by near-infrared spectra. Consequently, the optimum temperature and water tolerance of immobilized lipase were increased. Two TMP-feeding methods were used to maintain high molar ratio of fatty acid to TMP, and increase the final tri-substituted TMP esters content exceeding 85% (w/w) in reactant.

Application of biosurfactant from Sphingobacterium spiritivorum AS43 in the biodegradation of used lubricating oil.

This study aimed at investigating the application of biosurfactant from Sphingobacterium spiritivorum AS43 using molasses as a substrate and fertilizer to enhance the biodegradation of used lubricating oil (ULO). The cell surface hydrophobicity of bacteria, the emulsification activity, and the biodegradation efficiency of ULO were measured. The bacterial adhesion in the hydrocarbon test was used to denote the cell surface hydrophobicity of the used bacterial species. The results indicate a strong correlation between cell surface hydrophobicity, emulsification activity, and the degree of ULO biodegradation. The maximum degradation of ULO (62 %) was observed when either 1.5 % (w/v) of biosurfactant or fertilizer was added. The results also revealed that biosurfactants alone are capable of promoting biodegradation to a large extent without added fertilizer. The data indicate the potential for biosurfactant production by using low-cost substrate for application in the bioremediation of soils contaminated with petroleum hydrocarbons or oils.

Effect of unconventional carbon sources on biosurfactant production and its application in bioremediation.

The potential of an alkaliphilic bacterium Klebsiella sp. strain RJ-03, to utilize different unconventional carbon sources for the production of biosurfactant was evaluated. The biosurfactant produced using corn powder, potato peel powder, Madhuca indica and sugarcane bagasse containing medium, exhibited significantly higher viscosity and maximum reduction in surface tension as compared to other substrates. Among several carbon substrates tested, production of biosurfactant was found to be the highest with corn powder (15.40 ± 0.21 g/l) as compared to others. The comparative chemical characterization of purified biosurfactant was done using advance analytical tools such as NMR, FT-IR, SEM, GPC, MALDI TOF-TOF MS, GC-MS, TG and DSC. Analyses indicated variation in the functional groups, monosaccharide composition, molecular mass, thermostability. Higher yield with cheaper raw materials, noteworthy stress tolerance of CP-biosurfactant toward pH and salt as well as compatibility with chemical surfactants and detergents revealed its potential for commercialization and application in bioremediation.

Identifying safer anti-wear triaryl phosphate additives for jet engine lubricants.

Individuals aboard jet aircraft may be exposed to potentially toxic triaryl organophosphate anti-wear lubricant additives (TAPs) that are converted by cytochromes P450 into toxic metabolites. Consequences of exposure could be reduced by using less toxic TAPs. Our goal was to determine whether an in vitro assay for inhibition of butyrylcholinesterase (BChE) by bioactivated TAPs would be predictive of inhibition of serine active-site enzymes in vivo. The in vitro assay involved TAP bioactivation with liver microsomes and NADPH, followed by incubation with human BChE and measurement of BChE activity. Of 19 TAPs tested, tert-butylated isomers produced the least BChE inhibition. To determine the relevance of these results in vivo, mice were exposed to Durad 125 (D125; a commercial mixture of TAP esters) or to TAPs demonstrating low or no BChE inhibition when assayed in vitro. Inhibition of BChE by bioactivated TAPs in vitro correlated well with inhibition of other serine active-site enzymes in vivo, with the exception of brain acetylcholinesterase and neuropathy target esterase (NTE), which were not inhibited by any TAP tested following single exposures. A recombinant catalytic domain of NTE (rNEST) exhibited classical kinetic properties of NTE. The metabolite of tri-(o-cresyl) phosphate (ToCP), 2-(o-cresyl)-4H-1,3,2-benzodioxaphosphoran-2-one (CBDP), inhibited rNEST in vitro, but with an IC(50) value almost 6-times higher than for inhibition of BChE. Physiologically-relevant concentrations of the flavonoid naringenin dramatically reduced D125 bioconversion in vitro. The in vitro assay should provide a valuable tool for prescreening candidate TAP anti-wear additives, identifying safer additives and reducing the number of animals required for in vivo toxicity testing.