Earth as construction material in the circular economy context: practitioner perspectives on barriers to overcome.

The need for a vast quantity of new buildings to address the increase in population and living standards is opposed to the need for tackling global warming and the decline in biodiversity. To overcome this twofold challenge, there is a need to move towards a more circular economy by widely using a combination of alternative low-carbon construction materials, alternative technologies and practices. Soils or earth were widely used by builders before World War II, as a primary resource to manufacture materials and structures of vernacular architecture. Centuries of empirical practices have led to a variety of techniques to implement earth, known as rammed earth, cob and adobe masonry among others. Earth refers to local soil with a variable composition but at least containing a small percentage of clay that would simply solidify by drying without any baking. This paper discusses why and how earth naturally embeds high-tech properties for sustainable construction. Then the potential of earth to contribute to addressing the global challenge of modern architecture and the need to re-think building practices is also explored. The current obstacles against the development of earthen architecture are examined through a survey of current earth building practitioners in Western Europe. A literature review revealed that, surprisingly, only technical barriers are being addressed by the scientific community; two-thirds of the actual barriers identified by the interviewees are not within the technical field and are almost entirely neglected in the scientific literature, which may explain why earthen architecture is still a niche market despite embodying all the attributes of the best construction material to tackle the current climate and economic crisis. This article is part of the theme issue 'The role of soils in delivering Nature's Contributions to People'.

Incentive Mechanism and Subsidy Design for Construction and Demolition Waste Recycling under Information Asymmetry with Reciprocal Behaviors.

To solve information asymmetry, we adopted the principal-agent framework to design the incentive mechanisms between the remanufacturer and the collector in the construction and demolition (C&D) waste-recycling industry. By using the model of reciprocity, we analyzed how the entities' behavioral motives affect their decisions in terms of the incentive mechanisms. The findings showed that the collector responds to their perception of the remanufacturer's intentions. If the perception is positive, they will make more effort in the collection work. If not, less effort will be put forth. Most importantly, we found that reciprocity helps to save the remanufacturer cost in the incentive mechanisms and makes the collector choose a higher effort level in the collection work. This finding showed that reciprocity serves to solve information asymmetry. By conducting a numerical simulation, we found that although a high subsidy policy can achieve rapid improvement of recycling-supply-chain performance, it is inefficient in maintaining friendly cooperation between the remanufacturer and the collector.

Identification of critical factors in construction and demolition waste recycling by the grey-DEMATEL approach: a Chinese perspective.

The extensive waste produced in construction and demolition activities affects the ecological environment, impeding green development in countries worldwide, including China. China has paid increasing attention to managing construction and demolition waste (CDW). However, most of the existing research only qualitatively studies the factors affecting the recycling of CDW and does not reveal the critical factors. Therefore, based on stakeholder theory and the grey-DEMATEL method, this paper aims to identify and quantitatively analyze the critical factors in CDW recycling from the perspective of China. This paper drew the following conclusions: (1) Stakeholders in China's CDW recycling mainly include the government, CDW production units, and CDW recycling units. (2) Public policy, government subsidies, media promotion, human resources, cost, environmental awareness, technological innovation, and supply chain management are the eight dimensions with 13 factors that constitute CDW recycling in China. (3) For the total relations between factors affecting the recycling of CDW in China, the most influential factor is specific legislation and regulations. The factor with the highest degree of prominence is environmental awareness. The factor with the largest net cause value is the rationality of disposal and landfill charges. The factor with the largest net effect value is experienced construction workers. (4) The critical factors in China's CDW recycling include specific legislation and regulations, mandatory degree of normative standards, environmental awareness, the supply of raw materials for CDW recycling units, and the sale of remanufactured products. Finally, this paper identifies the following management implications: (1) the government should prioritize the task of improving specific legislation and regulations, with a focus on a mandatory degree of normative standards. (2) CDW production units should put the task of improving environmental awareness high on their agenda, with a focus on the supply of raw materials for recycling units. (3) CDW recycling units should prioritize the issue of the sale of remanufactured products. This paper also provides a theoretical basis for revealing the critical factors of CDW recycling in other countries or regions.

Towards a low CO2 emission building material employing bacterial metabolism (2/2): Prospects for global warming potential reduction in the concrete industry.

The production of concrete is one of the most significant contributors to global greenhouse gas emissions. This work focuses on bio-cementation-based products and their potential to reduce global warming potential (GWP). In particular, we address a proposed bio-cementation method employing bacterial metabolism in a two-step process of limestone dissolution and recrystallisation (BioZEment). A scenario-based techno-economic analysis (TEA) is combined with a life cycle assessment (LCA), a market model and a literature review of consumers' willingness to pay, to compute the expected reduction of global GWP. Based on the LCA, the GWP of 1 ton of BioZEment is found to be 70-83% lower than conventional concrete. In the TEA, three scenarios are investigated: brick, precast and onsite production. The results indicate that brick production may be the easiest way to implement the products, but that due to high cost, the impact on global GWP will be marginal. For precast production the expected 10% higher material cost of BioZEment only produces a marginal increase in total cost. Thus, precast production has the potential to reduce global GWP from concrete production by 0-20%. Significant technological hurdles remain before BioZEment-based products can be used in onsite construction scenarios, but in this scenario, the potential GWP reduction ranges from 1 to 26%. While the potential to reduce global GWP is substantial, significant efforts need to be made both in regard to public acceptance and production methods for this potential to be unlocked.

Evaluation of the effects of two alternative participatory ergonomics intervention strategies for construction companies.

To improve the use of ergonomics tools by construction workers, the effect of two guidance strategies - a face-to-face strategy (F2F) and an e-guidance strategy (EG) - of a participatory ergonomics intervention was studied. Twelve construction companies were randomly assigned to the F2F group or the EG group. The primary outcome measure, the percentage of workers using ergonomics tools, and secondary outcome measures - work ability, physical functioning and limitations due to physical problems - were assessed using surveys at baseline and after 6 months. Additionally, a cost-benefit analysis was performed on company level. No differences in primary and secondary outcomes were found with the exception of the use of ergonomics tools to adjust working height (F2F +1%; EG +10%; p = .001). Newly-implemented tools were used by 23% (F2F) and 42% (EG) of the workers (p = .271). Costs were mainly determined by guidance costs (F2F group) or purchase costs (EG group). Practitioner Summary: Participatory strategies aim to stimulate behavioural change of stakeholders to increase the use of ergonomics tools. Two guidance strategies - face-to-face or e-mail interventions - among construction companies were studied. Both guidance strategies led to an increase in the use of new ergonomics tools.

The Drivers and Impacts of Selling Soil for Brick Making in Bangladesh.

Soil degradation is an important threat to sustainable agriculture. In Bangladesh, brick production contributes to soil loss as the country relies on clay-rich soil for brick making. An in-depth understanding of why farmers sell soil and the corresponding impacts on agricultural productivity is critical for developing and implementing new policies for utilizing alternate materials and methods in Bangladesh and other areas that continue to rely on fired clay bricks as their primary building material. A team of anthropologists conducted 120 structured interviews and 20 in-depth interviews in two different geographical areas in Bangladesh to understand the incentives for and impacts of selling soil. The primary reason farmers sold soil was pressure from neighboring farmers who had previously sold soil. Once neighboring property owners had sold soil, then farmers felt they needed to sell their soil to level their land with the neighboring plot to avoid future production loss. Short-term monetary gain from selling soil was also a strong motivator helping farmers manage acute financial crises. In addition, farmers are frequently compelled to sell soil for brick making because of coercive practices by brick-owners and their soil brokers. In this study, farmers reported 40-80% reduction in crop production and 40-70% reduction in income due to soil removal. The loss of the soil reduces agricultural yields leading to both short- and longer-term impacts on crop production that influence the country's food security.

User preferences and water use savings owing to washbasin taps retrofit: a case study of the DECivil building of the University of Aveiro.

During the last decades, achieving water efficiency in buildings has increasingly become an important challenge in the scope of sustainability. Water consumption is directly related to individual conduct. Despite the various technological improvements in fixtures and appliances, their performance will be influenced by human preferences and behavior. As a result, the potential for effective water consumption saving is influenced by behavior change as well as water-efficient fixtures and appliances. This work evaluates the impact of user preferences and behavior change on the water-efficient performance of tap aerators in a case study building: the Department of Civil Engineering building of the University of Aveiro, Portugal. Four aerators with different discharge reductions and types were installed in the toilet's washbasins and the user's preferences and behavior change measured through direct and online questionnaires. It was observed that the effective water consumption reduction (15 to 49%) was less than the discharge reduction (30 to 70%), confirming that user factors influence water savings. Water use reductions in the tested range (2.0 to 6.7 l/min) also varied according to gender, with male users using less water than their female counterparts. It was noted that an awareness of sustainability values prevailed amongst the users when confronted with the choice between comfort and water efficiency, although differences were observed in the user preferences regarding the various aerators. When confronted with the information that the lower discharge aerator would contribute to a reduction of about 70% on the water discharge, 25% of the users agreed with its use, even if it resulted in a certain degree of dissatisfaction. In comparison, only 8% of the users completely disagreed with its installation. On average, the water consumption reduction was 46% smaller than the discharge reduction achievable with the aerator alone. This further confirms the user factors inform the degree of water savings that is achievable from water-efficient fittings and fixtures.

Making healthy homes? A pilot study of the return on investment from an external wall insulation intervention.

OBJECTIVES: External Wall Insulation (EWI) insulates and protect homes against damp. The Energy Company Obligation (ECO) scheme incentivised large energy providers in the UK delivering energy efficiency measures such as EWI to fuel impoverished households. Return on Investment (ROI) analysis is utilised to determine if EWI is a cost-effective procedure in terms of improving health related quality of life (HRQOL) measured using the EQ-5D-3L™, reducing health care expenditure, and fuel costs. Data comes from Stockton-On-Tees council, health care costs data, and information collected from households in the most socially deprived areas in Stockton-on-Tees. RESULTS: The total cost of installation across all 2252 that received EWI was £10,222,954 in 2016 GBP. Annual total benefits were extrapolated across all 3265 households that received EWI. Total benefits were differences between the control and treatment groups in fuel costs, health care costs, and HRQOL multiplied by the National Institute for Health and Care Excellence Quality Adjusted Life Year threshold (£20,000). Total benefits for all households that received EWI were £1,519,045. The ROI of EWI is - 41%. 7.9 years are needed to recoup the costs of the initial investment.

Is Using a Latrine "A Strange Thing To Do"? A Mixed-Methods Study of Sanitation Preference and Behaviors in Rural Ethiopia.

Latrines are the most basic form of improved sanitation and are a common public health intervention. Understanding motivations for building and using latrines can help develop effective, sustainable latrine promotion programs. We conducted a mixed-methods study of latrine use in the Amhara region of Ethiopia. We held 15 focus group discussions and surveyed 278 households in five communities. We used the Integrated Behavioral Model for Water, Sanitation, and Hygiene interventions to guide our qualitative analysis. Seventy-one percent of households had a latrine, but coverage varied greatly across communities. Higher household income was not associated with latrine use (odds ratio [OR] = 1.9; 95% confidence interval [CI] = 0.5, 7.7); similarly, cost and availability of materials were not discussed as barriers to latrine use in the focus groups. Male-headed households were more likely to use latrines than households with female heads (OR = 3.5; 95% CI = 1.6, 7.7), and households with children in school were more likely to use latrines than households without children in school (OR = 2.3; 95% CI = 1.6, 3.3). These quantitative findings were confirmed in focus groups, where participants discussed how children relay health messages from school. Participants discussed how women prefer not to use latrines, often finding them strange or even scary. These findings are useful for public health implementation; they imply that community-level drivers are important predictors of household latrine use and that cost is not a significant barrier. These findings confirm that school-aged children may be effective conduits of health messages and suggest that latrines can be better marketed and designed for women.

An economic analysis of the processing technologies in CDW recycling platforms.

This paper proposes an economic analysis of three different types of processing in CDW (construction and demolition waste) recycling platforms, according to the sophistication of the processing technologies (current advanced, advanced and advanced sorting). The methodology that is adopted is in the economic evaluation concept of projects and is classified with a scoping study phase. In these contexts, three levels of CDW processing capabilities for recycling platforms are analyzed (100, 300 and 600 thousand tons per year). This article considers databases obtained from similar projects that have been published in the specialized literature; the data sources are primarily from the European continent. The paper shows that current advanced process has better economic performance, in terms of IRR, related to the other two processes. The IRR associated with advanced and advanced sorting processes could be raised by, (i) higher price of secondary primary material, and/or (ii) higher capacity of platforms, and/or (iii) higher sharing of secondary primary material in the total production. The first two points depend on the market conditions (prices and total quantity of CDW available) and (potential) fiscal or incentive policies. The last one depends on technological progress.

Cost-Sharing of Ecological Construction Based on Trapezoidal Intuitionistic Fuzzy Cooperative Games.

There exist some fuzziness and uncertainty in the process of ecological construction. The aim of this paper is to develop a direct and an effective simplified method for obtaining the cost-sharing scheme when some interested parties form a cooperative coalition to improve the ecological environment of Min River together. Firstly, we propose the solution concept of the least square prenucleolus of cooperative games with coalition values expressed by trapezoidal intuitionistic fuzzy numbers. Then, based on the square of the distance in the numerical value between two trapezoidal intuitionistic fuzzy numbers, we establish a corresponding quadratic programming model to obtain the least square prenucleolus, which can effectively avoid the information distortion and uncertainty enlargement brought about by the subtraction of trapezoidal intuitionistic fuzzy numbers. Finally, we give a numerical example about the cost-sharing of ecological construction in Fujian Province in China to show the validity, applicability, and advantages of the proposed model and method.

The effect of lime-dried sewage sludge on the heat-resistance of eco-cement.

The treatment and disposal of sewage sludge is a growing problem for sewage treatment plants. One method of disposal is to use sewage sludge as partial replacement for raw material in cement manufacture. Although this process has been well researched, little attention has been given to the thermal properties of cement that has had sewage sludge incorporated in the manufacturing process. This study investigated the fire endurance of eco-cement to which lime-dried sludge (LDS) had been added. LDS was added in proportions of 0%, 3%, 6%, 9%, and 12% (by weight) to the raw material. The eco-cement was exposed to 200, 400, or 600 °C for 3 h. The residual strength and the microstructural properties of eco-cement were then studied. Results showed that the eco-cement samples suffered less damage than conventional cement at 600 °C. The microstructural studies showed that LDS incorporation could reduce Ca(OH)(2) content. It was concluded that LDS has the potential to improve the heat resistance of eco-cement products.

Stochastic Analysis and Forecasts of the Patterns of Speed, Acceleration, and Levels of Material Stock Accumulation in Society.

The recent acceleration of urbanization and industrialization of many parts of the developing world, most notably in Asia, has resulted in a fast-increasing demand for and accumulation of construction materials in society. Despite the importance of physical stocks in society, the empirical assessment of total material stock of buildings and infrastructure and reasons for its growth have been underexplored in the sustainability literature. We propose an innovative approach for explaining material stock dynamics in society and create a country typology for stock accumulation trajectories using the ARIMA (Autoregressive Integrated Moving Average) methodology, a stochastic approach commonly used in business studies and economics to inspect and forecast time series. This enables us to create scenarios for future demand and accumulation of building materials in society, including uncertainty estimates. We find that the so-far overlooked aspect of acceleration trends of material stock accumulation holds the key to explaining material stock growth, and that despite tremendous variability in country characteristics, stock accumulation is limited to only four archetypal growth patterns. The ability of nations to change their pattern will be a determining factor for global sustainability.

Mixture design and treatment methods for recycling contaminated sediment.

Conventional marine disposal of contaminated sediment presents significant financial and environmental burden. This study aimed to recycle the contaminated sediment by assessing the roles and integration of binder formulation, sediment pretreatment, curing method, and waste inclusion in stabilization/solidification. The results demonstrated that the 28-d compressive strength of sediment blocks produced with coal fly ash and lime partially replacing cement at a binder-to-sediment ratio of 3:7 could be used as fill materials for construction. The X-ray diffraction analysis revealed that hydration products (calcium hydroxide) were difficult to form at high sediment content. Thermal pretreatment of sediment removed 90% of indigenous organic matter, significantly increased the compressive strength, and enabled reuse as non-load-bearing masonry units. Besides, 2-h CO2 curing accelerated early-stage carbonation inside the porous structure, sequestered 5.6% of CO2 (by weight) in the sediment blocks, and acquired strength comparable to 7-d curing. Thermogravimetric analysis indicated substantial weight loss corresponding to decomposition of poorly and well crystalline calcium carbonate. Moreover, partial replacement of contaminated sediment by various granular waste materials notably augmented the strength of sediment blocks. The metal leachability of sediment blocks was minimal and acceptable for reuse. These results suggest that contaminated sediment should be viewed as useful resources.

Evaluation of seismic performance and effectiveness of multiple slim-type damper system for seismic response control of building structures.

This paper presents the evaluation of seismic performance and cost-effectiveness of a multiple slim-type damper system developed for the vibration control of earthquake excited buildings. The multiple slim-type damper (MSD) that consists of several small slim-type dampers and linkage units can control damping capacity easily by changing the number of small dampers. To evaluate the performance of the MSD, dynamic loading tests are performed with three slim-type dampers manufactured at a real scale. Numerical simulations are also carried out by nonlinear time history analysis with a ten-story earthquake excited building structure. The seismic performance and cost-effectiveness of the MSD system are investigated according to the various installation configurations of the MSD system. From the results of numerical simulation and cost-effectiveness evaluation, it is shown that combinations of the MSD systems can effectively improve the seismic performance of earthquake excited building structures.

Seismic performance of RC beam-column connections with continuous rectangular spiral transverse reinforcements for low ductility classes.

The seismic performance of RC columns could be significantly improved by continuous spiral reinforcement as a result of its adequate ductility and energy dissipation capacity. Due to post-earthquake brittle failure observations in beam-column connections, the seismic behaviour of such connections could greatly be improved by simultaneous application of this method in both beams and columns. In this study, a new proposed detail for beam to column connection introduced as "twisted opposing rectangular spiral" was experimentally and numerically investigated and its seismic performance was compared against normal rectangular spiral and conventional shear reinforcement systems. In this study, three full scale beam to column connections were first designed in conformance with Eurocode (EC2-04) for low ductility class connections and then tested by quasistatic cyclic loading recommended by ACI Building Code (ACI 318-02). Next, the experimental results were validated by numerical methods. Finally, the results revealed that the new proposed connection could improve the ultimate lateral resistance, ductility, and energy dissipation capacity.