Comparative assessment of impact analysis methods applied to large commercial aircraft crash on reinforced concrete containment.

The precise evaluation of the potential damage caused by large commercial aircraft crash into civil structures, especially nuclear power plants (NPPs), has become essential design consideration. In this study, impact of Boeing 767 against rigid wall and outer containment building (reinforced concrete) of an NPP are simulated in ANSYS/LS-DYNA by using both force time history and missile target interaction methods with impact velocities ranging from 100 m/s to 150 m/s. The results show that impact loads, displacements, stresses for concrete and steel reinforcement, and damaged elements are higher in case of force time history method than missile target interaction method, making the former relatively conservative. It is observed that no perforation or scabbing takes place in case of 100 m/s impact speed, thus preventing any potential leakage. With full mass of Boeing 767 and impact velocity slightly above 100 m/s, the outer containment building can prevent local failure modes. At impact velocity higher than 120 m/s, scabbing and perforations are dominant. This concludes that in design and assessment of NPP structures against aircraft loadings, sufficient thickness or consideration of steel plates are essential to account for local failure modes and overall structural integrity. Furthermore, validation and application of detail 3D finite element and material models to full-scale impact analysis have been carried out to expand the existing database. In rigid wall impact analysis, the impact forces and impulses from FE analysis and Riera's method correspond well, which satisfies the recommendations of relevant standards and further ensure the accuracy of results in full-scale impact analysis. The methodology presented in this paper is extremely effective in simulating structural evaluation of full-scale aircraft impact on important facilities such as NPPs.

Novel Evolutionary Algorithm Identifies Interactions Driving Infestation of Triatoma dimidiata, a Chagas Disease Vector.

Chagas disease is a lethal, neglected tropical disease. Unfortunately, aggressive insecticide-spraying campaigns have not been able to eliminate domestic infestation of Triatoma dimidiata, the native vector in Guatemala. To target interventions toward houses most at risk of infestation, comprehensive socioeconomic and entomologic surveys were conducted in two towns in Jutiapa, Guatemala. Given the exhaustively large search space associated with combinations of risk factors, traditional statistics are limited in their ability to discover risk factor interactions. Two recently developed statistical evolutionary algorithms, specifically designed to accommodate risk factor interactions and heterogeneity, were applied to this large combinatorial search space and used in tandem to identify sets of risk factor combinations associated with infestation. The optimal model includes 10 risk factors in what is known as a third-order disjunctive normal form (i.e., infested households have chicken coops AND deteriorated bedroom walls OR an accumulation of objects AND dirt floors AND total number of occupants ≥ 5 AND years of electricity ≥ 5 OR poor hygienic condition ratings AND adobe walls AND deteriorated walls AND dogs). Houses with dirt floors and deteriorated walls have been reported previously as risk factors and align well with factors currently targeted by Ecohealth interventions to minimize infestation. However, the tandem evolutionary algorithms also identified two new socioeconomic risk factors (i.e., households having many occupants and years of electricity ≥ 5). Identifying key risk factors may help with the development of new Ecohealth interventions and/or reduce the survey time needed to identify houses most at risk.

Exposure-response assessment of cancer mortality in styrene-exposed boatbuilders.

OBJECTIVES: To improve exposure estimates and reexamine exposure-response relationships between cumulative styrene exposure and cancer mortality in a previously studied cohort of US boatbuilders exposed between 1959 and 1978 and followed through 2016. METHODS: Cumulative styrene exposure was estimated from work assignments and air-sampling data. Exposure-response relationships between styrene and select cancers were examined in Cox proportional hazards models matched on attained age, sex, race, birth cohort and employment duration. Models adjusted for socioeconomic status (SES). Exposures were lagged 10 years or by a period maximising the likelihood. HRs included 95% profile-likelihood CIs. Actuarial methods were used to estimate the styrene exposure corresponding to 10-4 extra lifetime risk. RESULTS: The cohort (n= 5163) contributed 201 951 person-years. Exposures were right-skewed, with mean and median of 31 and 5.7 ppm-years, respectively. Positive, monotonic exposure-response associations were evident for leukaemia (HR at 50 ppm-years styrene = 1.46; 95% CI 1.04 to 1.97) and bladder cancer (HR at 50 ppm-years styrene =1.64; 95% CI 1.14 to 2.33). There was no evidence of confounding by SES. A working lifetime exposure to 0.05 ppm styrene corresponded to one extra leukaemia death per 10 000 workers. CONCLUSIONS: The study contributes evidence of exposure-response associations between cumulative styrene exposure and cancer. Simple risk projections at current exposure levels indicate a need for formal risk assessment. Future recommendations on worker protection would benefit from additional research clarifying cancer risks from styrene exposure.

Relationship Between Housing Components and Development of Eosinophilic Esophagitis.

BACKGROUND: While the environment contributes to EoE pathogenesis, few environmental risk factors for EoE have been identified. AIM: To determine whether housing components such as exterior materials, heating systems, and house age are associated with EoE. METHODS: This case-control study used the UNC EoE clinicopathologic database to identify newly diagnosed EoE patients. Controls were patients without EoE who underwent endoscopy during the study time frame. Housing data were collected from publicly available online sources, and cases and controls were compared. The primary analysis was restricted to those living at their provided address at the time of diagnostic endoscopy. Multivariable logistical regression estimated associations after adjusting for potential confounders. RESULTS: Of 451 EoE cases and 2421 controls identified, the primary analysis included 158 cases and 769 controls. Compared to controls, EoE cases were more likely to have a house with a brick exterior (35% vs 26%; p = 0.04), gas heating (14% vs 8%; p = 0.06), or forced air (57% vs 45%; p = 0.009). In adjusted analysis, brick exterior was positively associated with EoE diagnosis [aOR 1.83 (95% CI 1.11-3.02)]. The average duration a patient lived in their house before EoE diagnosis was 7.2 ± 5.9 years, while symptom duration prior to diagnosis was 6.8 ± 8.4 years. CONCLUSION: EoE patients were more likely to have houses with a brick exterior, forced air, or gas heating, and brick exteriors were independently associated with EoE. Since symptoms generally started after moving into a house, housing-related environmental exposures may contribute to EoE disease development.

Environmental impacts of chemical and microbial grouting.

Climate change is considered the major environmental challenge for the world. Cement and lime production is a highly energy-consuming, heavily polluting process, and the CO2 emissions are very substantial. Alkaline environment, high temperature, and long processing time lead the researchers to work on alternative soil improvements. Microbially induced calcite precipitation (MICP) has been introduced as a technique for modification of geotechnical properties of sand. The main purpose of the present study was to focus on the efficiency and environmental impact of conventional and microbial grouting. Samples were treated with three chemical stabilizers, namely Portland cement, lime, and cement and lime. The stabilizers were injected with flow gravity and constant head which are almost the same as microbial grouting. Then, the results of conventional grouting were compared with the results of biocement samples which were gathered from previous studies to discuss the efficiency and environmental impacts. The results for treated samples were discussed and compared based on 1 m3 of soil and a final target of 700 kPa. It was found that in order to obtain the same compressive strength, the cost and calcium carbonate consumption of the cement injection method were 2.5 times more than those of the microbial method. Biocementation has some advantages over existing technologies, such as less calcium usage in the same unconfined compressive strength (UCS).

Factors influencing bird-building collisions in the downtown area of a major North American city.

Bird-building collisions are the largest source of avian collision mortality in North America. Despite a growing literature on bird-building collisions, little research has been conducted in downtown areas of major cities, and no studies have included stadiums, which can be extremely large, often have extensive glass surfaces and lighting, and therefore may cause many bird collisions. Further, few studies have assessed the role of nighttime lighting in increasing collisions, despite the often-cited importance of this factor, or considered collision correlates for different seasons and bird species. We conducted bird collision monitoring over four migration seasons at 21 buildings, including a large multi-use stadium, in downtown Minneapolis, Minnesota, USA. We used a rigorous survey methodology to quantify among-building variation in collisions and assess how building features (e.g., glass area, lighting, vegetation) influence total collision fatalities, fatalities for separate seasons and species, and numbers of species colliding. Four buildings, including the stadium, caused a high proportion of all collisions and drove positive effects of glass area and amount of surrounding vegetation on most collision variables. Excluding these buildings from analyses resulted in slightly different collision predictors, suggesting that factors leading some buildings to cause high numbers of collisions are not the exact same factors causing variation among more typical buildings. We also found variation in collision correlates between spring and fall migration and among bird species, that factors influencing collision fatalities also influence numbers of species colliding, and that the proportion, and potentially area, of glass lighted at night are associated with collisions. Thus, reducing bird collisions at large buildings, including stadiums, should be achievable by reducing glass area (or treating existing glass), reducing light emission at night, and prioritizing mitigation efforts for glass surfaces near vegetated areas and/or avoiding use of vegetation near glass.

Analysis of Waste Generation Characteristics during New Apartment Construction-Considering the Construction Phase.

The waste generation rate (WGR) is used to predict the generation of construction and demolition waste (C&DW) and has become a prevalent tool for efficient waste management systems. Many studies have focused on deriving the WGR, but most focused on demolition waste rather than construction waste (CW). Moreover, previous studies have used theoretical databases and thus were limited in showing changes in the generated CW during the construction period of actual sites. In this study, CW data were collected for recently completed apartment building sites through direct measurement, and the WGR was calculated by CW type for the construction period. The CW generation characteristics by type were analyzed, and the results were compared with those of previous studies. In this study, CW was classified into six types: Waste concrete, waste asphalt concrete, waste wood, waste synthetic resin, waste board, and mixed waste. The amount of CW generated was lowest at the beginning of the construction period. It slowly increased over time and then decreased again at the end. In particular, waste concrete and mixed waste were generated throughout the construction period, while other CWs were generated in the middle of the construction period or towards the end. The research method and results of this study are significant in that the construction period was considered, which has been neglected in previous studies on the WGR. These findings are expected to contribute to the development of efficient CW management systems.

Evaluation of the effects of two alternative participatory ergonomics intervention strategies for construction companies.

To improve the use of ergonomics tools by construction workers, the effect of two guidance strategies - a face-to-face strategy (F2F) and an e-guidance strategy (EG) - of a participatory ergonomics intervention was studied. Twelve construction companies were randomly assigned to the F2F group or the EG group. The primary outcome measure, the percentage of workers using ergonomics tools, and secondary outcome measures - work ability, physical functioning and limitations due to physical problems - were assessed using surveys at baseline and after 6 months. Additionally, a cost-benefit analysis was performed on company level. No differences in primary and secondary outcomes were found with the exception of the use of ergonomics tools to adjust working height (F2F +1%; EG +10%; p = .001). Newly-implemented tools were used by 23% (F2F) and 42% (EG) of the workers (p = .271). Costs were mainly determined by guidance costs (F2F group) or purchase costs (EG group). Practitioner Summary: Participatory strategies aim to stimulate behavioural change of stakeholders to increase the use of ergonomics tools. Two guidance strategies - face-to-face or e-mail interventions - among construction companies were studied. Both guidance strategies led to an increase in the use of new ergonomics tools.

User preferences and water use savings owing to washbasin taps retrofit: a case study of the DECivil building of the University of Aveiro.

During the last decades, achieving water efficiency in buildings has increasingly become an important challenge in the scope of sustainability. Water consumption is directly related to individual conduct. Despite the various technological improvements in fixtures and appliances, their performance will be influenced by human preferences and behavior. As a result, the potential for effective water consumption saving is influenced by behavior change as well as water-efficient fixtures and appliances. This work evaluates the impact of user preferences and behavior change on the water-efficient performance of tap aerators in a case study building: the Department of Civil Engineering building of the University of Aveiro, Portugal. Four aerators with different discharge reductions and types were installed in the toilet's washbasins and the user's preferences and behavior change measured through direct and online questionnaires. It was observed that the effective water consumption reduction (15 to 49%) was less than the discharge reduction (30 to 70%), confirming that user factors influence water savings. Water use reductions in the tested range (2.0 to 6.7 l/min) also varied according to gender, with male users using less water than their female counterparts. It was noted that an awareness of sustainability values prevailed amongst the users when confronted with the choice between comfort and water efficiency, although differences were observed in the user preferences regarding the various aerators. When confronted with the information that the lower discharge aerator would contribute to a reduction of about 70% on the water discharge, 25% of the users agreed with its use, even if it resulted in a certain degree of dissatisfaction. In comparison, only 8% of the users completely disagreed with its installation. On average, the water consumption reduction was 46% smaller than the discharge reduction achievable with the aerator alone. This further confirms the user factors inform the degree of water savings that is achievable from water-efficient fittings and fixtures.

Biomineralization in metakaolin modified cement mortar to improve its strength with lowered cement content.

The role of industrial byproduct as supplementary cementitious material to partially replace cement has greatly contributed to sustainable environment. Metakaolin (MK), one of such byproduct, is widely used to partial replacement of cement; however, during cement replacement at high percentage, it may not be a good choice to improve the strength of concrete. Thus, in the present study, biocement, a product of microbially induced carbonate precipitation is utilized in MK-modified cement mortars to improve its compressive strength. Despite of cement replacement with MK as high as 50%, the presented technology improved compressive strength of mortars by 27%, which was still comparable to those mortars with 100% cement. The results proved that biomineralization could be effectively used in reducing cement content without compromising compressive strength of mortars. Biocementation also reduced the porosity of mortars at all ages. The process was characterized by SEM-EDS to observe bacterially-induced carbonate crystals and FTIR spectroscopy to predict responsible bonding in the formation of calcium carbonate. Further, XRD analysis identified bio/minerals formed in the MK-modified mortars. The study also encourages combining biological role in construction engineering to solve hazardous nature of cement and at same time solve the disposal problem of industrial waste for sustainable environment.

Electrochemical oxidation of the polycyclic aromatic hydrocarbons in polluted concrete of the residential buildings.

Polycyclic aromatic hydrocarbons (PAH) have been listed by the United States Environmental Protection Agency (US EPA) and by the European Community as priority environmental pollutants. The removal of PAHs from soils, sediments and waste water has attracted attention of scientists and engineers for several decades. Electrochemical oxidation of PAH compounds in water, is receiving increasing attention, due to its convenience and simplicity. In this study we performed electrochemical oxidation of 16 EPA PAHs mixture in 10% NaCl aqueous solution in potentiostatic conditions, at voltage 1 V. Decrease of concentration of some individual PAHs, up to 70% referred to their starting concentration, after 60 min of electrolysis, was confirmed by UPLC/PDA analysis. In further work investigation was extrapolated to in situ removal of PAHs from concrete, as the medium where, to our knowledge, such way of PAH removal has not been investigated before. High concentrations of PAH contamination occurred in the concrete structure of the residential buildings in Belgrade in 2014. Application of DC voltage of 50 V between nickel and stainless steel electrodes packed in the concrete wall, moisturized with the 10% NaCl solution, led to considerable removal of the pollutants by oxidation process throughout the concrete.

An Australian stocks and flows model for asbestos.

All available data on asbestos consumption in Australia were collated in order to determine the most common asbestos-containing materials remaining in the built environment. The proportion of asbestos contained within each material and the types of products these materials are most commonly found in was also determined. The lifetime of these asbestos containing products was estimated in order to develop a model that projects stocks and flows of asbestos products in Australia through to the year 2100. The model is based on a Weibull distribution and was built in an excel spreadsheet to make it user-friendly and accessible. The nature of the products under consideration means both their asbestos content and lifetime parameters are highly variable, and so for each of these a high and low estimate is presented along with the estimate used in the model. The user is able to vary the parameters in the model as better data become available.

Stochastic Analysis and Forecasts of the Patterns of Speed, Acceleration, and Levels of Material Stock Accumulation in Society.

The recent acceleration of urbanization and industrialization of many parts of the developing world, most notably in Asia, has resulted in a fast-increasing demand for and accumulation of construction materials in society. Despite the importance of physical stocks in society, the empirical assessment of total material stock of buildings and infrastructure and reasons for its growth have been underexplored in the sustainability literature. We propose an innovative approach for explaining material stock dynamics in society and create a country typology for stock accumulation trajectories using the ARIMA (Autoregressive Integrated Moving Average) methodology, a stochastic approach commonly used in business studies and economics to inspect and forecast time series. This enables us to create scenarios for future demand and accumulation of building materials in society, including uncertainty estimates. We find that the so-far overlooked aspect of acceleration trends of material stock accumulation holds the key to explaining material stock growth, and that despite tremendous variability in country characteristics, stock accumulation is limited to only four archetypal growth patterns. The ability of nations to change their pattern will be a determining factor for global sustainability.

Risk factors of childhood asthma in children attending Lyari General Hospital.

OBJECTIVE: To determine the factors associated with asthma in children. METHODS: The case-control study was conducted in the paediatrics clinic of Lyari General Hospital, Karachi, from May to October 2010. Children 1-15 years of age attending the clinic represented the cases, while the control group had children who were closely related (sibling or cousin) to the cases but did not have the symptoms of disease at the time. Data was collected through a proforma and analysed using SPSS 10. RESULTS: Of the total 346 subjects, 173(50%) each comprised the two groups. According to univariable analysis the risk factors were presence of at least one smoker (odds ratio: 3.6; 95% confidence interval: 2.3-5.8), resident of kacha house (odds ratio: 16.2; 95% confidence interval: 3.8-69.5),living in room without windows (odds ratio: 9.3; 95% confidence interval: 2.1-40.9) and living in houses without adequate sunlight (odds ratio: 1.6; 95% confidence interval: 1.2-2.4).Using multivariable modelling, family history of asthma (odds ratio: 5.9; 95% confidence interval: 3.1-11.6), presence of at least one smoker at home (odds ratio: 4.1; 95% confidence interval: 2.3-7.2), people living in a room without a window (odds ratio: 5.5; 95% confidence interval: 1.15-26.3) and people living in an area without adequate sunlight (odds ratio: 2.2; 95% confidence interval: 1.13-4.31) were found to be independent risk factors of asthma in children adjusting for age, gender and history of weaning. CONCLUSIONS: Family history of asthma, children living with at least one smoker at home, room without windows and people living in an area without sunlight were major risk factors of childhood asthma.

Advances in industrial prospective of cellulosic macromolecules enriched banana biofibre resources: A review.

Biological macromolecules enriched resources are rapidly emerging as sustainable, cost effective and environmental friendly materials for several industrial applications. Among different biological macromolecules enriched resources, banana fibres are one of the unexplored high potential bio-resources. Compared to various natural fibres such as jute, coir, palm etc., the banana fibres exhibits a better tensile strength i.e. 458 MPa with 17.14 GPa tensile modulus. Traditionally used petroleum based synthetic fibres have been proven to be toxic, non-biodegradable and energy intensive for manufacturing. Cellulosic banana fibres are potential engineering materials having considerable scope to be used as an environmental friendly reinforcing element for manufacturing of polymer based green materials. This paper summarizes the world scenario of current production of biological macromolecules rich banana residues and fibres; major user's of banana fibres. The quality and quantity of biological macromolecules especially the cellulose, hemicellulose, lignin, wax, engineering and mechanical properties of banana biofibre resources are reported and discussed. Subsequently, the findings of the recent research on bio resource composites, materials performance and opportunities have been discussed which would be a real challenge for the tomorrow world to enhance the livelihood environmental friendly advancement.

Assessment of gamma dose rate in dwellings due to decorative stones.

For more accurate assessment of the enhanced external exposure to dwellers caused by decorative stones, based on a model room and different decorative conditions, the 3-D distributions of indoor gamma dose rates were computed by the Monte Carlo simulations, and a new model was established to estimate the extra gamma dose rate at the centre of the room in this study. For verification of the simulation results, the gamma radiation was both instantaneously and cumulatively measured in a test room. The results showed that both the gamma dose rate at the centre of the room and the distribution of indoor gamma radiation were in general agreement with the simulated ones.