Assessing the role of surface layer and molecular probe size in diffusion within meniscus tissue.

Diffusion within extracellular matrix is essential to deliver nutrients and larger metabolites to the avascular region of the meniscus. It is well known that both structure and composition of the meniscus vary across its regions; therefore, it is crucial to fully understand how the heterogenous meniscal architecture affects its diffusive properties. The objective of this study was to investigate the effect of meniscal region (core tissue, femoral, and tibial surface layers) and molecular weight on the diffusivity of several molecules in porcine meniscus. Tissue samples were harvested from the central area of porcine lateral menisci. Diffusivity of fluorescein (MW 332 Da) and three fluorescence-labeled dextrans (MW 3k, 40k, and 150k Da) was measured via fluorescence recovery after photobleaching. Diffusivity was affected by molecular size, decreasing as the Stokes' radius of the solute increased. There was no significant effect of meniscal region on diffusivity for fluorescein, 3k and 40k dextrans (p>0.05). However, region did significantly affect the diffusivity of 150k Dextran, with that in the tibial surface layer being larger than in the core region (p = 0.001). Our findings contribute novel knowledge concerning the transport properties of the meniscus fibrocartilage. This data can be used to advance the understanding of tissue pathophysiology and explore effective approaches for tissue restoration.

Effect of meniscus modelling assumptions in a static tibiofemoral finite element model: importance of geometry over material.

Finite element studies of the tibiofemoral joint have increased use in research, with attention often placed on the material models. Few studies assess the effect of meniscus modelling assumptions in image-based models on contact mechanics outcomes. This work aimed to assess the effect of modelling assumptions of the meniscus on knee contact mechanics and meniscus kinematics. A sensitivity analysis was performed using three specimen-specific tibiofemoral models and one generic knee model. The assumptions in representing the meniscus attachment on the tibia (shape of the roots and position of the attachment), the material properties of the meniscus, the shape of the meniscus and the alignment of the joint were evaluated, creating 40 model instances. The values of material parameters for the meniscus and the position of the root attachment had a small influence on the total contact area but not on the meniscus displacement or the force balance between condyles. Using 3D shapes to represent the roots instead of springs had a large influence in meniscus displacement but not in knee contact area. Changes in meniscus shape and in knee alignment had a significantly larger influence on all outcomes of interest, with differences two to six times larger than those due to material properties. The sensitivity study demonstrated the importance of meniscus shape and knee alignment on meniscus kinematics and knee contact mechanics, both being more important than the material properties or the position of the roots. It also showed that differences between knees were large, suggesting that clinical interpretations of modelling studies using single geometries should be avoided.

Editorial Commentary: Biologic Stimulation Using Marrow Venting for Meniscus Repair is Cost Effective and Recommended.

Current literature offers little guidance on the most cost-effective approach to intraoperative biologic stimulation in the setting of arthroscopic meniscus repair. Combining data from robust systematic reviews into a Markov Decision Making Model reveal the ideal strategy: Strong consideration should be given to biologic stimulation for all meniscal repairs, and the most cost effective technique is marrow stimulation.

Biomechanical properties of porcine meniscus as determined via AFM: Effect of region, compartment and anisotropy.

The meniscus is a fibrocartilaginous tissue that plays an essential role in load transmission, lubrication, and stabilization of the knee. Loss of meniscus function, through degeneration or trauma, can lead to osteoarthritis in the underlying articular cartilage. To perform its crucial function, the meniscus extracellular matrix has a particular organization, including collagen fiber bundles running circumferentially, allowing the tissue to withstand tensile hoop stresses developed during axial loading. Given its critical role in preserving the health of the knee, better understanding structure-function relations of the biomechanical properties of the meniscus is critical. The main objective of this study was to measure the compressive modulus of porcine meniscus using Atomic Force Microscopy (AFM); the effects of three key factors were investigated: direction (axial, circumferential), compartment (medial, lateral) and region (inner, outer). Porcine menisci were prepared in 8 groups (= 2 directions x 2 compartments x 2 regions) with n = 9 per group. A custom AFM was used to obtain force-indentation curves, which were then curve-fit with the Hertz model to determine the tissue's compressive modulus. The compressive modulus ranged from 0.75 to 4.00 MPa across the 8 groups, with an averaged value of 2.04±0.86MPa. Only direction had a significant effect on meniscus compressive modulus (circumferential > axial, p = 0.024), in agreement with earlier studies demonstrating that mechanical properties in the tissue are anisotropic. This behavior is likely the result of the particular collagen fiber arrangement in the tissue and plays a key role in load transmission capability. This study provides important information on the micromechanical properties of the meniscus, which is crucial for understanding tissue pathophysiology, as well as for developing novel treatments for tissue repair.

Heterogeneity of dynamic shear properties of the meniscus: A comparison between tissue core and surface layers.

Damage to the meniscus has been associated with excessive shear loads. Aimed at elucidating meniscus pathophysiology, previous studies have investigated the shear properties of the meniscus fibrocartilaginous core. However, the meniscus is structurally inhomogeneous, with an external cartilaginous envelope (tibial and femoral surface layers) wrapping the tissue core. To date, little is known about the shear behavior of the surface layers. The objective of this study was to measure the dynamic shear properties of the surface layers and derive empirical relations with their composition. Specimens were harvested from tibial and femoral surface layers and core of porcine menisci (medial and lateral, n = 10 each). Frequency sweep tests yielded complex shear modulus (G*) and phase shifts (δ). Mechanical behavior of regions was described by a generalized Maxwell model. Correlations between shear moduli with water and glycosaminoglycans content of the tissue regions were investigated. The femoral surface had the lowest shear modulus, when compared to core and tibial regions. A 3-relaxation times Maxwell model satisfactorily interpreted the shear behavior of all tissue regions. Inhomogeneous tissue composition was also observed, with water content in the surface layers being higher when compared with tissue core. Water content negatively correlated with shear properties in all regions. The lower measured shear properties in the femoral layer may explain the higher prevalence of meniscal tears on the superior surface of the tissue. The heterogenous behavior of the tissue in shear provides insight into meniscus pathology and has important implications for efforts to tissue engineer replacement tissues.

Bone Marrow-Derived Fibrin Clots Stimulate Healing of a Knee Meniscal Defect in a Rabbit Model.

PURPOSE: To determine the in vivo effectiveness of bone marrow aspirate-derived (BMA) fibrin clots for avascular meniscal defect healing in a rabbit model. METHODS: In 42 Japanese white rabbits, a 2.0-mm cylindrical defect was introduced into the avascular zone of the anterior part of the medial meniscus in the bilateral knees. The rabbits were grouped according to implantation of a BMA fibrin clot (BMA group) or a peripheral blood (PB)-derived clot (PB group) into the defect and nonimplantation (control group). Macroscopic and histological assessments were performed using a scoring system at 4 and 12 weeks after surgery. At 12 weeks after surgery, compressive stress was analyzed biomechanically. RESULTS: The meniscal score in the BMA group (12.1) was greater than that in the PB group (5.5; P = .031) and control group (4.4; P = .013) at 4 weeks. The meniscal score in the BMA group (13.1) was greater than that in the control group (6.4; BMA = 13.1; P = .0046) at 12 weeks. In the biomechanical analysis, the BMA group demonstrated significantly higher compressive strength than the PB group (6.6 MPa) (BMA = 15.4 MPa; P = .0201) and control group (3.6 MPa; BMA = 15.4 MPa; P = .007). CONCLUSIONS: Implantation of BMA fibrin clots into the meniscal defect of the avascular zone in a rabbit model improved the meniscal score at 4 weeks and strengthened the reparative meniscal tissue at 12 weeks compared with the implantation of PB fibrin clots. CLINICAL RELEVANCE: Healing in the avascular zone of the meniscus can be problematic. Approaches to improving this healing response have had variable results. This study provides additional information that may help improve the outcomes in patients with these injuries.

Dynamic response of medial meniscus extrusion to the lateral wedge insole is correlated with immediate pain reduction in knee osteoarthritis patients: real-time ultrasonographic study.

PURPOSE: To investigate the effect of lateral wedge insole (LWI) on medial meniscus extrusion (MME) observed during dynamic evaluation with ultrasound and its correlation with the alteration in knee pain in patients with knee osteoarthritis (OA). METHODS: This cohort study included 25 participants with knee OA. The medial meniscus was imaged during walking in video mode using ultrasonography. The degree of increase in MME (ΔMME) was calculated as the difference in the value of the maximum and minimum MME. The intensity of knee pain was evaluated immediately after the walking trial using the visual analogue scale (VAS). These measurements were performed with and without the LWI. The participants were categorised into the responder group, which was identified by the constant reduction in the VAS, and the non-responder group. RESULTS: MME, ΔMME, and knee pain during walking were significantly lower with the LWI than without the LWI (p < 0.01). The reduction in ΔMME with the LWI in the responder group was significantly higher than that in the non-responder group (p < 0.01). CONCLUSIONS: Our findings showed that MME and knee pain during walking decreased with LWI use, especially in patients whose reduction in knee pain was characterised by inhibition in the increase in MME observed during dynamic evaluation with ultrasound.

Mechanical and Microstructural Properties of Meniscus Roots Vary by Location.

BACKGROUND: Despite the growing awareness of the clinical significance of meniscus root tears, there are relatively limited biomechanical and microstructural data available on native meniscus roots that could improve our understanding of why they are injured and how to best treat them. PURPOSE/HYPOTHESIS: The purpose of the study was to measure the material and microstructural properties of meniscus roots using mechanical testing and quantitative polarized light imaging. The hypothesis was that these properties vary by location (medial vs lateral, anterior vs posterior) and by specific root (anteromedial vs anterolateral, posteromedial vs posterolateral). STUDY DESIGN: Descriptive laboratory study. METHODS: Anterior and posterior meniscus roots of the medial and lateral meniscus were isolated from 22 cadavers (10 female, 12 male; mean ± SD age, 47.1 ± 5.1 years) and loaded in uniaxial tension. Quantitative polarized light imaging was used to measure collagen fiber organization and realignment under load. Samples were subjected to preconditioning, stress-relaxation, and a ramp to failure. Time-dependent relaxation behavior was quantified. Modulus values were computed in the toe and linear regions of the stress-strain curves. The degree of linear polarization (DoLP) and angle of polarization-measures of the strength and direction of collagen alignment, respectively-were calculated during the stress-relaxation test and at specific strain values throughout the ramp to failure (zero, transition, and linear strain). RESULTS: Anterior roots had larger moduli than posterior roots in the toe (P = .007) and linear (P < .0001) regions and larger average DoLP values at all points of the ramp to failure (zero, P = .016; transition, P = .004; linear, P = .002). Posterior roots had larger values across all regions in terms of standard deviation angle of polarization (P < .001). Lateral roots had greater modulus values versus medial roots in the toe (P = .027) and linear (P = .014) regions. Across all strain points, posterolateral roots had smaller mean DoLP values than posteromedial roots. CONCLUSION: Posterior meniscus roots have smaller modulus values and more disorganized collagen alignment at all strain levels when compared with anterior roots. Posterolateral roots have lower strength of collagen alignment versus posteromedial roots. CLINICAL RELEVANCE: These data findings may explain at least in part the relative paucity of anterior meniscus root tears and the predominance of traumatic posterolateral roots tears as compared with degenerative posteromedial root tears.

Micromechanical properties of the healthy canine medial meniscus.

AIMS: Knowledge of the micromechanical characteristics of the menisci is required to better understand their role within the stifle joint, improve early diagnosis of meniscal lesions, and develop new treatment and/or replacement strategies. The aim of the study was to determine the mechanical properties of the healthy medial canine meniscus and to evaluate the effect of regional (caudal, central, and cranial) and circumference (axial and abaxial) locations on these properties. METHODS: To study the micromechanical properties of the medial menisci in healthy (Beagle) dogs, the influence of regional (caudal, central, and cranial) and circumference (axial and abaxial) locations were evaluated. Nanoindentation-relaxation tests were performed to characterize the local stiffness and the viscoelastic properties at each region and specific circumference. Linear interpolation onto the indentation points was performed to establish a map of the micromechanical property heterogeneities. RESULTS: The results indicate that the cranial region was significantly stiffer and less viscous than the central and caudal regions. Within the central region the inner part (axial) was significantly stiffer than the periphery (abaxial). Within the caudal region the inner part was significantly less viscous than the periphery. CONCLUSION: Significant regional and radial variations were observed for both the stiffness and the viscoelastic properties. Moreover, a viscous behavior of the entire medial meniscus was observed (elastic fraction <0.5). These results deter the use of average elastic modulus to study the regional mechanical properties of healthy meniscus.

Quantifying the differential functional behavior between the medial and lateral meniscus after posterior meniscus root tears.

Meniscus tears of the knee are among the most common orthopedic knee injury. Specifically, tears of the posterior root can result in abnormal meniscal extrusion leading to decreased function and progressive osteoarthritis. Despite contemporary surgical treatments of posterior meniscus root tears, there is a low rate of healing and an incidence of residual meniscus extrusion approaching 30%, illustrating an inability to recapitulate native meniscus function. Here, we characterized the differential functional behavior of the medial and lateral meniscus during axial compression load and dynamic knee motion using a cadaveric model. We hypothesized essential differences in extrusion between the medial and lateral meniscus in response to axial compression and knee range of motion. We found no differences in the amount of meniscus extrusion between the medial and lateral meniscus with a competent posterior root (0.338mm vs. 0.235mm; p-value = 0.181). However, posterior root detachment resulted in a consistently increased meniscus extrusion for the medial meniscus compared to the lateral meniscus (2.233mm vs. 0.4705mm; p-value < 0.0001). Moreover, detachment of the posterior root of the medial meniscus resulted in an increase in extrusion at all angles of knee flexion and was most pronounced (4.00mm ± 1.26mm) at 30-degrees of knee flexion. In contrast, the maximum mean extrusion of the lateral meniscus was 1.65mm ± 0.97mm, occurring in full extension. Furthermore, only the medial meniscus extruded during dynamic knee flexion after posterior root detachment. Given the differential functional behaviors between the medial and lateral meniscus, these findings suggest that posterior root repair requires reducing overall meniscus extrusion and recapitulating the native functional responses specific to each meniscus.

Meniscus Anatomy and Basic Science.

A basic understanding of meniscal anatomy and biomechanics is important for physicians evaluating knee injuries and surgeons treating meniscal injuries. This chapter provides a concise review of meniscal anatomy and biomechanics relevant for the evaluation and treatment of meniscus injuries. Anatomic landmarks relevant for meniscal root repair and transplant are discussed, along with the gross, microscopic, vascular, and neuroanatomy of the menisci.

The Functionally Grading Elastic and Viscoelastic Properties of the Body Region of the Knee Meniscus.

The knee meniscus is a highly porous structure which exhibits a grading architecture through the depth of the tissue. The superficial layers on both femoral and tibial sides are constituted by a fine mesh of randomly distributed collagen fibers while the internal layer is constituted by a network of collagen channels of a mean size of 22.14 [Formula: see text]m aligned at a [Formula: see text] inclination with respect to the vertical. Horizontal dog-bone samples extracted from different depths of the tissue were mechanically tested in uniaxial tension to examine the variation of elastic and viscoelastic properties across the meniscus. The tests show that a random alignment of the collagen fibers in the superficial layers leads to stiffer mechanical responses (E = 105 and 189 MPa) in comparison to the internal regions (E = 34 MPa). All regions exhibit two modes of relaxation at a constant strain ([Formula: see text] to 7.7 s, [Formula: see text] = 49.9 to 59.7 s).

Development of a novel meniscal sheet scaffold and its effectiveness for meniscal regeneration in a rabbit defect model.

This study evaluated the biomechanical strength of a novel two-layer meniscal sheet scaffold (MSS) consisting of polyglycolic acid and poly-Llactic acid/caprolactone and investigated meniscal healing using wrapping treatment for meniscal defect model in a rabbit. The ultimate failure load of the MSS was determined using a tensile testing machine, in vitro. A 2-mm cylindrical defects were created at the medial meniscus of rabbit knees (n = 40). Each knee was assigned to one of two groups. The defect group was not treated and the MSS group underwent wrapping treatment with MSS. Menisci were harvested at 2, 4, 8, and 12 weeks post-implantation. The regenerated meniscus and defect size were evaluated using macrophotographs. Ishida scores for regenerated tissue were determined using Safranin-O/Fast Green staining. Immunohistochemical analysis of Ki-67 for cell proliferation, anti-type I and II collagen antibodies for structure of the regenerated tissue was elucidated. Medial femoral cartilage was stained with Safranin-O/Fast Green and evaluated with Osteoarthritis Research Society International (OARSI) scores. The strength of MSS was maintained over 90% from initial time point to 4 weeks after hydrolysis and over 60% of the strength remained at 8 weeks. The surface area of the meniscus was larger and the defect size smaller in the MSS group than in the defect group at 8 and 12 weeks. Ishida scores revealed that the MSS group improved significantly compared to that of the defect group at all postsurgery time points evaluated. Ki-67 positive cell ratio was significantly higher in the MSS group. OARSI score of the defect group was significantly higher and the defect group showed progressive degeneration in the articular cartilage from 8 to 12 weeks. Overall, wrapping meniscus defects with MSS was useful for accelerating meniscal healing from an early stage and beneficial for tissue regeneration and promoting extracellular matrix maturation.

Microstructure Analysis and Reconstruction of a Meniscus.

OBJECTIVE: To analyze the characteristics of menicus microstructure and to reconstruct a microstructure-mimicing 3D model of the menicus. METHODS: Human and sheep meniscus were collected and prepared for this study. Hematoxylin-eosin staining (HE) and Masson staining were conducted for histological analysis of the meniscus. For submicroscopic structure analysis, the meniscus was first freeze-dried and then scanned by scanning electron microscopy (SEM). The porosity of the meniscus was determined according to SEM images. A micro-MRI was used to scan each meniscus, immersed in distilled water, and a 3D digital model was reconstructed afterwards. A three-dimensional (3D) resin model was printed out based on the digital model. Before high-resolution micro-CT scanning, each meniscus was freeze-dried. Then, micro-scale two-dimensional (2D) CT projection images were obtained. The porosity of the meniscus was calculated according to micro-CT images. With micro-CT, multiple 2D projection images were collected. A 3D digital model based on 2D CT pictures was also reconstructed. The 3D digital model was exported as STL format. A 3D resin model was printed by 3D printer based on the 3D digital model. RESULTS: As revealed in the HE and Masson images, a meniscus is mostly composed of collagen, with a few cells disseminated between the collagen fiber bundles at the micro-scale. The SEM image clearly shows the path of highly cross-linked collagen fibers, and massive pores exist between the fibers. According to the SEM images, the porosity of the meniscus was 34.1% (34.1% ± 0.032%) and the diameters of the collagen fibers were varied. In addition, the cross-linking pattern of the fibers was irregular. The scanning accuracy of micro-MRI was 50 µm. The micro-MRI demonstrated the outline of the meniscus, but the microstructure was obscure. The micro-CT clearly displayed microfibers in the meniscus with a voxel size of 11.4 µm. The surface layer, lamellar layer, circumferential fibers, and radial fibers could be identified. The mean porosity of the meniscus according to micro-CT images was 33.92% (33.92% ± 0.03%). Moreover, a 3D model of the microstructure based on the micro-CT images was built. The microscale fibers could be displayed in the micro-CT image and the reconstructed 3D digital model. In addition, a 3D resin model was printed out based on the 3D digital model. CONCLUSION: It is extremely difficult to artificially simulate the microstructure of the meniscus because of the irregularity of the diameter and cross-linking pattern of fibers. The micro-MRI images failed to demonstrate the meniscus microstructure. Freeze-drying and micro-CT scanning are effective methods for 3D microstructure reconstruction of the meniscus, which is an important step towards mechanically functional 3D-printed meniscus grafts.

Updates and Advances in the Management of Lateral Meniscal Radial Tears: A Critical Analysis Review.

Because of their increased mobility, lack of resistance to hoop stresses, and decreased blood supply, radial tears of the lateral meniscus are more troublesome to heal than vertical longitudinal tears. Given the success of meniscal root repairs, radial tears of the lateral meniscal body should be given strong consideration for repair because of a more reproducible ability to heal such lesions in young, active patients. Technique options that should be considered for the less common anterior radial tears of the lateral meniscus include outside-in repair, self-capturing suture-passing devices, and orthobiologic treatments to stimulate healing. Although a variety of suture techniques, including the double horizontal mattress and horizontal butterfly patterns, have demonstrated improvements in patient outcomes, evidence is still limited with regard to the ideal suture pattern for radial tears.

Bovine Meniscus Middle Zone Tissue: Measurement of Collagen Fibril Behavior During Compression.

BACKGROUND: Type I collagen is the major component of the extracellular matrix of the knee's meniscus and plays a central role in that joint's biomechanical properties. Repair and reconstruction of tissue damage often requires a scaffold to assist the body to rebuild. The middle zone of bovine meniscus is a material that may be useful for the preparation of extracellular matrix scaffolds. METHODS: Here, synchrotron-based small-angle X-ray scattering (SAXS) patterns of bovine meniscus were collected during unconfined compression. Collagen fibril orientation, D-spacing, compression distance and force were measured. RESULTS: The collagen fibrils in middle zone meniscal fibrocartilage become more highly oriented perpendicular to the direction of compression. The D-spacing also increases, from 65.0 to 66.3 nm with compression up to 0.43 MPa, representing a 1.8% elongation of collagen fibrils perpendicular to the compression. CONCLUSION: The elasticity of the collagen fibrils under tension along their length when the meniscus is compressed, therefore, contributes to the overall elastic response of the meniscus only under loads that exceed those likely to be experienced physiologically.

Constitutive modeling of menisci tissue: a critical review of analytical and numerical approaches.

Menisci are fibrocartilaginous disks consisting of soft tissue with a complex biomechanical structure. They are critical determinants of the kinematics as well as the stability of the knee joint. Several studies have been carried out to formulate tissue mechanical behavior, leading to the development of a wide spectrum of constitutive laws. In addition to developing analytical tools, extensive numerical studies have been conducted on menisci modeling. This study reviews the developments of the most widely used continuum models of the meniscus mechanical properties in conjunction with emerging analytical and numerical models used to study the meniscus. The review presents relevant approaches and assumptions used to develop the models and includes discussions regarding strengths, weaknesses, and discrepancies involved in the presented models. The study presents a comprehensive coverage of relevant publications included in Compendex, EMBASE, MEDLINE, PubMed, ScienceDirect, Springer, and Scopus databases. This review aims at opening novel avenues for improving menisci modeling within the framework of constitutive modeling through highlighting the needs for further research directed toward determining key factors in gaining insight into the biomechanics of menisci which is crucial for the elaborate design of meniscal replacements.

Autologous Adipose-Derived Stem Cell Sheet Has Meniscus Regeneration-Promoting Effects in a Rabbit Model.

PURPOSE: This study investigated meniscal regeneration-promoting effects of adipose-derived stem cell (ADSC) sheets in a rabbit meniscal defect models. METHODS: ADSCs were extracted from the interscapular fat pad adipose tissue of 42 mature female Japanese white rabbits. Once cells reached confluence at the third passage, the culture medium was supplemented with ascorbic acid. Within a week, the cells in culture formed removable sheets, which were used as ADSC sheets. Cell death (CD) sheets were created by killing ADSCs by freezing to investigate the need for viable ADSCs in ADSC sheets. The anterior half of the medial meniscus from the anterior root to the posterior edge of the medial collateral ligament was removed from both limbs. An autologous ADSC or CD sheet was transplanted to one knee (ADSC sheet or CD sheet group). The contralateral limb was closed without transplantation following meniscal removal (control group). Rabbits were euthanized 4 and 12 weeks after transplantation to harvest the entire medial menisci. The meniscal tissue area, transverse diameter on the inside of the medial collateral ligament, and histologic score were compared between the 3 groups. RESULTS: The area and transverse diameter of regenerated tissues were larger in the ADSC sheet group than in the control group at 4 and 12 weeks. Further, the histologic score in the ADSC sheet group (8) was significantly greater than that in the control group (4.5) at 4 weeks (P = .02) and greater than that in the CD sheet group (9) (ADSC = 12.5, P = .009) and control group (6) (ADSC = 12.5, P = .0003) at 12 weeks. CONCLUSIONS: Transplantation of the ADSC sheet into the meniscal defect increased the volume and improved the histologic score of the regenerated meniscal tissue. ADSC sheets may have meniscal regeneration-promoting effects in a rabbit model with meniscal defects. CLINICAL RELEVANCE: ADSC sheets do not require a scaffold for implantation in the rabbit model, and this evidence suggests that some tissue regeneration occurs at the site of a surgically created meniscal defect.

Can a ratio between medial and lateral meniscal volumes be calculated to determine critical meniscal volume in view of post-meniscectomy symptoms?

Partial meniscectomy is a frequently performed treatment strategy for non-suturable meniscal tears. However, the meniscal volume which can be resected without compromising the load-bearing, shock-absorbing function of the meniscus remains a topic of ongoing research. The aim of this study was to calculate the medio-lateral meniscal volume ratio to estimate this volume. In 90 patients (98 pairs of menisci) without meniscal injury, medial and lateral menisci were segmented on MRI imaging and 3D surface models were created to calculate volume. The mean medial meniscal volume was 1928,9mm3 and the mean lateral meniscal volume was 1681,7mm3. A fixed ratio of the medial over the lateral meniscal volume was calculated to be 1,16. The standard deviation of the prediction errors based on this ratio equals 217mm3. This ratio seems a useful parameter in follow-up research to determine whether there is a critical volume which can be resected without post-operative pain and osteoarthritis.

The implications of non-anatomical positioning of a meniscus prosthesis on predicted human knee joint biomechanics.

Despite all the efforts to optimize the meniscus prosthesis system (geometry, material, and fixation type), the success of the prosthesis in clinical practice will depend on surgical factors such as intra-operative positioning of the prosthesis. In this study, the aim was therefore to assess the implications of positional changes of the medial meniscus prosthesis for knee biomechanics. A detailed validated finite element (FE) model of human intact and meniscal implanted knees was developed based on a series of in vitro experiments. Different non-anatomical prosthesis positions were applied in the FE model, and the biomechanical response during the gait stance phase compared with an anatomically positioned prosthesis, as well as meniscectomized and also the intact knee model. The results showed that an anatomical positioning of the medial meniscus prosthesis could better recover the intact knee biomechanics, while a non-anatomical positioning of the prosthesis to a limited extent alters the knee kinematics and articular contact pressure and increases the implantation failure risk. The outcomes indicate that a medial or anterior positioning of the meniscus prosthesis may be more forgiving than a posteriorly or laterally positioned prosthesis. The outcome of this study may provide a better insight into the possible consequences of meniscus prosthesis positioning errors for the patient and the prosthesis functionality. Graphical abstract.