NIR-Driven Intracellular Photocatalytic O2 Evolution on Z-Scheme Ni3S2/Cu1.8S@HA for Hypoxic Tumor Therapy.

Hypoxia in a tumor microenvironment (TME) has inhibited the photodynamic therapy (PDT) efficacy. Here, Ni3S2/Cu1.8S nanoheterostructures were synthesized as a new photosensitizer, which also realizes the intracellular photocatalytic O2 evolution to relieve hypoxia in TME and enhance PDT as well. With the narrow band gap (below 1.5 eV), the near infrared (NIR) (808 nm) can stimulate their separation of the electron-hole. The novel Z-scheme nanoheterostructures, testified by experimental data and density functional theory (DFT) calculation, possess a higher redox ability, endowing the photoexited holes with sufficient potential to oxide H2O into O2, directly. Meanwhile, the photostimulated electrons can capture the dissolved O2 to form a toxic reactive oxygen species (ROS). Moreover, Ni3S2/Cu1.8S nanocomposites also possess the catalase-/peroxidase-like activity to convert the endogenous H2O2 into ·OH and O2, which not only cause chemodynamic therapy (CDT) but also alleviate hypoxia to assist the PDT as well. In addition, owing to the narrow band gap, they possess a high NIR harvest and great photothermal conversion efficiency (49.5%). It is noted that the nanocomposites also exhibit novel biodegradation and can be metabolized and eliminated via feces and urine within 2 weeks. The present single electrons in Ni/Cu ions induce the magnetic resonance imaging (MRI) ability for Ni3S2/Cu1.8S. To make sure that the cancer cells were specifically targeted, hyaluronic acid (HA) was grafted outside and Ni3S2/Cu1.8S@HA integrated photodynamic therapy (PDT), chemodynamic therapy (CDT), and photothermal therapy (PTT) to exhibit the great anticancer efficiency for hypoxic tumor elimination.

Defect-engineered transition metal hydroxide nanosheets realizing tumor-microenvironment-responsive multimodal-imaging-guided NIR-II photothermal therapy.

Exploiting two-dimensional nanomaterials as photo-based theranostic agents is promising for the highly efficient ablation of deep-tissue-buried tumors. However, they are limited by their poor absorption in the second near-infrared-light (NIR-II) bio-window (1000-1300 nm) and intrinsic nonbiodegradability. Herein, defect-rich sulfur-doped Ni(OH)2 (S-Ni(OH)2) nanosheets decorated with bovine serum albumin (BSA) as a novel theranostic agent is developed, which can accomplish multimodal-imaging-guided photothermal ablation of mouse cancers in the NIR-II bio-window. Sulfur doping extends the absorption spectra of Ni(OH)2 nanosheets from the visible to NIR-II bio-window, affording highly efficient photothermal conversion (58.20% for 1064 nm), entailing it to become an excellent contrast agent for photoacoustic imaging. Further, because of their intrinsic paramagnetic property, they can be applied for magnetic resonance imaging. Owing to the abundant defective sites in S-Ni(OH)2 nanosheets, they exhibit response to the tumor microenvironment, resulting in effective biodegradation and excretion from the body. In vivo toxicity experiments indicated that S-Ni(OH)2-BSA NSs delivered no appreciable toxicity and good biocompatibility. This work provides an avenue for the rational design of effective theranostics agents.

Non-Catalytic Benefits of Ni(II) Binding to an Si(111)-PNP Construct for Photoelectrochemical Hydrogen Evolution Reaction: Metal Ion Induced Flat Band Potential Modulation.

We report here the remarkable and non-catalytic beneficial effects of a Ni(II) ion binding to a Si|PNP type surface as a result of significant thermodynamic band bending induced by ligand attachment and Ni(II) binding. We unambiguously deconvolute the thermodynamic flat band potentials (VFB) from the kinetic onset potentials (Von) by synthesizing a specialized bis-PNP macrochelate that enables one-step Ni(II) binding to a p-Si(111) substrate. XPS analysis and rigorous control experiments confirm covalent attachment of the designed ligand and its resulting Ni(II) complex. Illuminated J-V measurements under catalytic conditions show that the Si|BisPNP-Ni substrate exhibits the most positive onset potential for the hydrogen evolution reaction (HER) (-0.55 V vs Fc/Fc+) compared to other substrates herein. Thermodynamic flat band potential measurements in the dark reveal that Si|BisPNP-Ni also exhibits the most positive VFB value (-0.02 V vs Fc/Fc+) by a wide margin. Electrochemical impedance spectroscopy data generated under illuminated, catalytic conditions demonstrate a surprising lack of correlation evident between Von and equivalent circuit element parameters commonly associated with HER. Overall, the resulting paradigm comprises a system wherein the extent of band bending induced by metal ion binding is the primary driver of photoelectrochemical (PEC)-HER benefits, while the kinetic (catalytic) effects of the PNP-Ni(II) are minimal. This suggests that dipole and band-edge engineering must be a primary design consideration (not secondary to catalyst) in semiconductor|catalyst hybrids for PEC-HER.

A distance-triggered signaling on-off mechanism by plasmonic Au nanoparticles: toward advanced photocathodic DNA bioanalysis.

An efficient signaling on-off mechanism was first proposed by integrating exciton-plasmon coupling and exciton energy transfer into cathodic PEC bioassays. This signaling on-off mechanism has endowed the cathodic PEC biosensor with powerful capability for ultrasensitive and specific detection of target DNA.

Liposomes Containing Nickel-Bis(dithiolene) Complexes for Photothermal Theranostics.

New thermosensitive liposomes with a phase transition at 42 °C, containing nickel-bis(dithiolene) complexes as efficient and stable photothermal agents, have been formulated and characterized. These liposomes are highly stable and keep their contents at 37 °C for more than 30 days. On the contrary, the mild hyperthermia generated by the nickel-bis(dithiolene) complex under 940 nm NIR irradiation allows for the fine controlled release of the liposome contents, making such liposomes highly suitable for on-demand drug delivery in the human body under NIR laser irradiation. These liposomes can also be directly used, as shown here, as nanoagents for photothermal therapy. In fact, strong cell death can be generated under laser irradiation in the presence of these photothermally active nanocargos containing less than 10% w/w of metal complex. We also demonstrate, for the first time, that nickel-bis(dithiolene) complexes are good photoacoustic agents, generating easily detectable ultrasonic signals directly proportional to the concentration of complexes and the used laser power.

Effect of radiofrequency electromagnetic fields (RF-EMFS) from mobile phones on nickel release from orthodontic brackets: An in vitro study.

BACKGROUND: The worldwide dramatic increase in the use of cell phones has generated great concerns about their potential adverse health effects. OBJECTIVE: The aim of the present study was to evaluate the effects of radiofrequency electromagnetic fields (RF-EMFs) emitted from mobile phones on the level of nickel release from orthodontic brackets. METHODS: Twenty stainless steel brackets were divided randomly into experimental and control groups (n=10). Brackets were immersed in artificial saliva at 37°C for 6 months. Experimental group were exposed to GSM 900MHz RF-EMFs emitted from a mobile phone stimulator for 4hours. The specific absorption rate (SAR) was 2.287W/kg. The concentration of nickel in the artificial saliva in both groups was evaluated by using the cold-vapour atomic absorption spectrometry. The Mann-Whitney test was used to assess significant differences in nickel release between the exposed and non-exposed groups. RESULTS: The mean nickel levels in the exposed and non-exposed groups were 11.95 and 2.89µg/l, respectively. This difference between the concentrations of nickel in the artificial saliva of these groups was statistically significant (P=0.001). CONCLUSION: Exposure to RF-EMFs emitted from mobile phones can lead to human exposure to higher levels of nickel in saliva in patients with orthodontic appliances. As nickel exposure can lead to allergic reaction in humans and considering this point that about 10-20% of the population can be hypersensitive to nickel, further studies are needed to evaluate the effects of radiofrequency electromagnetic fields (RF-EMFs) emitted from common devices such as mobile phones or Wi-Fi routers on the level of nickel release from orthodontic brackets.

Enhanced photocatalytic removal of Safranin-T dye under sunlight within minute time intervals using heulandite/polyaniline@ nickel oxide composite as a novel photocatalyst.

Natural zeolite heulandite/polyaniline composite (Hu/PANI) was synthesized for the first time as catalyst support for nickel oxide photocatalyst (Hu/PANI@Ni2O3). The structural, chemical, morphological, textural and optical properties were investigated using different techniques. The synthetic Ni2O3 crystals showed well developed flaky habits with diameter range 200-400 nm and length range 1-4 µm. The estimated band gap energies of Hu/PANI composite and Hu/PANI@Ni2O3 composite are 1.8 eV and 1.46 eV, respectively, which are remarkably smaller than the recorded value for pure nickel oxide. The photocatalytic properties of Hu/PANI@Ni2O3 composite for efficient degradation of safranin-T dye were evaluated under sunlight as a function of irradiation time, initial dye concentration, catalyst mass, solution pH, and the catalyst stability. Hu/PANI@Ni2O3 composite exhibits amazing photocatalytic degradation efficiency for safranin dye, whereas 80%, 98%, and ~ 100% of 5 mg/l dye were removed after only 1 min of solar irradiation using 0.025, 0.03, and 0.035 g of Hu/PANI@Ni2O3, respectively. The higher concentrations of the dye (10-50 mg/L) can be fully removed within minutes by increasing the solution pH or using higher doses from the Hu/PANI@Ni2O3 catalyst. The removal percentage achieved the maximum value at the alkaline conditions. Also, the Hu/PANI@Ni2O3 displayed high stability and remain 84.5% of the initial photocatalytic efficiency after 5 runs. Additionally, the composite can be used effectively in the removal of different types of dyes and mixed dyes within the same time intervals. Thus, loading of nickel oxide onto hybrid Hu/PANI composite as a catalyst support achieved amazing photocatalytic degradation capacity.

Promoting sun light-induced photocatalytic degradation of toxic phenols by efficient and stable double metal cyanide nanocubes.

Aromatic substituted phenols and their by-products discharged from numerous industries are of environmental concern due to their toxic, carcinogenic, recalcitrant, and bioaccumulating properties. Therefore, their complete removal from waters by low-cost, efficient, environmentally friendly nanomaterial-based treatment techniques is desirable. Double metal cyanide complexes (DMCC) are the extremely useful heterogeneous and recoverable catalyst. Hence, green route has been developed for several DMCC and their photocatalytic efficiency was evaluated for degradation of toxic phenols. Herein, nanocubes for hexacyanocobaltate of iron (FeHCC ~ 200 nm), nickel (NiHCC < 10 nm), and zinc (ZnHCC ~ 500 nm) were synthesized after employing Aegle marmelos. Subsequently, at neutral pH and sunlight irradiation, 15 mg of catalysts were able to degrade the maximum extent of phenols (1 × 10-4 M) in the order: 3-aminophenol (96% ZnHCC > 94% FeHCC > 93% NiHCC) > phenol (94% ZnHCC > 92% FeHCC > 91% NiHCC) > 2,4-DNP (92% ZnHCC > 91% FeHCC > 90% NiHCC). This is attributed to highest basicity of 3-aminophenol containing excess of free electrons. Highest catalytic potential of ZnHCC (Xm = 0.54-0.43 mg/g) is because of its highest surface area and negative zeta potential along with sharp morphology and crystallinity. Adsorption of phenols over catalyst was statistically significant with Langmuir isotherms (R2 ≥ 0.96; p value ≤ 0.05). Small and non-toxic by-products like oxalic acid, benzoquinone, (Z)-hex-3-enedioic acid, (Z)-but-2-enal, and (Z)-4-oxobut-2-enoic acid were identified in GC-MS. Degradation modes involving hydroxylation, oxidative skeletal rearrangement, and ring opening clearly supported enhanced oxidation of phenols by •OH. Overall, due to greater active sites, high surface activity, low band gap, and semiconducting nature, DMCC revealed promising potential for solar photocatalytic remediation of wastewater.

NiS and MoS2 nanosheet co-modified graphitic C3N4 ternary heterostructure for high efficient visible light photodegradation of antibiotic.

The development of efficient solar driven catalytic system for the degradation of antibiotics has become increasingly important in environmental protection and remediation. Non-noble-metal NiS and MoS2 nanosheet co-modified graphitic C3N4 ternary heterostructure has been synthesized via a facile combination of hydrothermal and ultrasound method, and the ternary heterostructure has been utilized for photocatalytic degradation of antibiotic agents. The antibiotics of ciprofloxacin (CIP) and tetracycline hydrochloride (TC) were photodegraded by the hybrid under the visible light. The optimal photodegradation rate of the ternary heterostructure reaches about 96% after 2h irradiation, which is 2.1 times higher than that of pure g-C3N4 for TC degradation. The photocatalytic degradation rates of the ternary heterostructure for both CIP and TC obey the pseudo-first-order kinetic model. The enhanced visible light adsorption and charge separation efficiency contribute to the photocatalytic performance of the ternary heterostructure. This work provides new insights and pathways by which efficient degradation of antibiotics can be achieved and will stimulate further studies in this important field.

Microstructure and corrosion behavior of laser processed NiTi alloy.

Laser Engineered Net Shaping (LENS™), a commercially available additive manufacturing technology, has been used to fabricate dense equiatomic NiTi alloy components. The primary aim of this work is to study the effect of laser power and scan speed on microstructure, phase constituents, hardness and corrosion behavior of laser processed NiTi alloy. The results showed retention of large amount of high-temperature austenite phase at room temperature due to high cooling rates associated with laser processing. The high amount of austenite in these samples increased the hardness. The grain size and corrosion resistance were found to increase with laser power. The surface energy of NiTi alloy, calculated using contact angles, decreased from 61 mN/m to 56 mN/m with increase in laser energy density from 20 J/mm(2) to 80 J/mm(2). The decrease in surface energy shifted the corrosion potentials to nobler direction and decreased the corrosion current. Under present experimental conditions the laser power found to have strong influence on microstructure, phase constituents and corrosion resistance of NiTi alloy.

Effect of mobile phone use on metal ion release from fixed orthodontic appliances.

INTRODUCTION: The aim of this study was to evaluate the effect of exposure to radiofrequency electromagnetic fields emitted by mobile phones on the level of nickel in saliva. METHODS: Fifty healthy patients with fixed orthodontic appliances were asked not to use their cell phones for a week, and their saliva samples were taken at the end of the week (control group). The patients recorded their time of mobile phone usage during the next week and returned for a second saliva collection (experimental group). Samples at both times were taken between 8:00 and 10:00 pm, and the nickel levels were measured. Two-tailed paired-samples t test, linear regression, independent t test, and 1-way analysis of variance were used for data analysis. RESULTS: The 2-tailed paired-samples t test showed significant differences between the levels of nickel in the control and experimental groups (t [49] = 9.967; P <0.001). The linear regression test showed a significant relationship between mobile phone usage time and the nickel release (F [1, 48] = 60.263; P <0.001; R(2) = 0.577). CONCLUSIONS: Mobile phone usage has a time-dependent influence on the concentration of nickel in the saliva of patients with orthodontic appliances.

Vectorial electron transfer for improved hydrogen evolution by mercaptopropionic-acid-regulated CdSe quantum-dots-TiO2 -Ni(OH)2 assembly.

A visible-light-induced hydrogen evolution system based on a CdSe quantum dots (QDs)-TiO2 -Ni(OH)2 ternary assembly has been constructed under an ambient environment, and a bifunctional molecular linker, mercaptopropionic acid, is used to facilitate the interaction between CdSe QDs and TiO2 . This hydrogen evolution system works effectively in a basic aqueous solution (pH 11.0) to achieve a hydrogen evolution rate of 10.1 mmol g(-1) h(-1) for the assembly and a turnover frequency of 5140 h(-1) with respect to CdSe QDs (10 h); the latter is comparable with the highest value reported for QD systems in an acidic environment. X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and control experiments demonstrate that Ni(OH)2 is an efficient hydrogen evolution catalyst. In addition, inductively coupled plasma optical emission spectroscopy and the emission decay of the assembly combined with the hydrogen evolution experiments show that TiO2 functions mainly as the electron mediator; the vectorial electron transfer from CdSe QDs to TiO2 and then from TiO2 to Ni(OH)2 enhances the efficiency for hydrogen evolution. The assembly comprises light antenna CdSe QDs, electron mediator TiO2 , and catalytic Ni(OH)2 , which mimics the strategy of photosynthesis exploited in nature and takes us a step further towards artificial photosynthesis.

Effect of surface modification by nitrogen ion implantation on the electrochemical and cellular behaviors of super-elastic NiTi shape memory alloy.

The aim of this investigation was to enhance the biological behavior of NiTi shape memory alloy while preserving its super-elastic behavior in order to facilitate its compatibility for application in human body. The surfaces of NiTi samples were bombarded by three different nitrogen doses. Small-angle X-ray diffraction was employed for evaluating the generated phases on the bombarded surfaces. The electrochemical behaviors of the bare and surface-modified NiTi samples were studied in simulated body fluid (SBF) using electrochemical impedance and potentio-dynamic polarization tests. Ni ion release during a 2-month period of service in the SBF environment was evaluated using atomic absorption spectrometry. The cellular behavior of nitrogen-modified samples was studied using fibroblast cells. Furthermore, the effect of surface modification on super-elasticity was investigated by tensile test. The results showed the improvement of both corrosion and biological behaviors of the modified NiTi samples. However, no significant change in the super-elasticity was observed. Samples modified at 1.4E18 ion cm(-2) showed the highest corrosion resistance and the lowest Ni ion release.

A reentrant phenomenon in magnetic and dielectric properties of Dy2BaNiO5 and an intriguing influence of external magnetic field.

We report that the spin-chain compound Dy2BaNiO5, recently proven by us to exhibit magnetoelectric coupling below its Néel temperature (TN) of 58 K, exhibits strong frequency-dependent behavior in ac magnetic susceptibility and complex dielectric properties at low temperatures (<10 K), mimicking the 'reentrant' multiglass phenomenon. Such a behavior is not known among undoped compounds. A new finding in the field of multiferroics is that the characteristic magnetic feature at low temperatures moves towards higher temperatures in the presence of a magnetic field (H), whereas the corresponding dielectric feature shifts towards lower temperatures with H, unlike the situation near TN. This observation indicates that the alignment of spins by external magnetic fields tends to inhibit glassy-like slow electric-dipole dynamics, at least in this system, possibly arising from peculiarities in the magnetic structure.

Effect of orthodontic brackets and different wires on radiofrequency heating and magnetic field interactions during 3-T MRI.

OBJECTIVES: To evaluate the heating and magnetic field interactions of fixed orthodontic appliances with different wires and ligaments in a 3-T MRI environment and to estimate the safety of these orthodontic materials. METHODS: 40 non-carious extracted human maxillary teeth were embedded in polyvinyl chloride boxes, and orthodontic brackets were bonded. Nickel-titanium and stainless steel arch wires, and elastic and stainless steel ligaments were used to obtain four experimental groups in total. Specimens were evaluated at 3 T for radiofrequency heating and magnetic field interactions. Radiofrequency heating was evaluated by placing specimens in a cylindrical plastic container filled with isotonic solution and measuring changes in temperature after T1 weighted axial sequencing and after completion of all sequences. Translational attraction and torque values of specimens were also evaluated. One-way ANOVA test was used to compare continuous variables of temperature change. Significance was set at p < 0.05. RESULTS: None of the groups exhibited excessive heating (highest temperature change: <3.04 °C), with the maximum increase in temperature observed at the end of the T1 weighted axial sequence. Magnetic field interactions changed depending on the material used. Although the brackets presented minor interactions that would not cause movement in situ, nickel-titanium and stainless steel wires presented great interactions that may pose a risk for the patient. CONCLUSIONS: The temperature changes of the specimens were considered to be within acceptable ranges. With regard to magnetic field interactions, brackets can be considered "MR safe"; however, it would be safe to replace the wires before MRI.

Efficient chemical and visible-light-driven water oxidation using nickel complexes and salts as precatalysts.

Chemical and visible-light-driven water oxidation catalyzed by a number of Ni complexes and salts have been investigated at pH 7-9 in borate buffer. For chemical oxidation, [Ru(bpy)3](3+) (bpy = 2,2'-bipyridine) was used as the oxidant, with turnover numbers (TONs) >65 and a maximum turnover frequency (TOFmax) >0.9 s(-1). Notably, simple Ni salts such as Ni(NO3 )2 are more active than Ni complexes that bear multidentate N-donor ligands. The Ni complexes and salts are also active catalysts for visible-light-driven water oxidation that uses [Ru(bpy)3](2+) as the photosensitizer and S2 O8 (2-) as the sacrificial oxidant; a TON>1200 was obtained at pH 8.5 by using Ni(NO3)2 as the catalyst. Dynamic light scattering measurements revealed the formation of nanoparticles in chemical and visible-light-driven water oxidation by the Ni catalysts. These nanoparticles aggregated during water oxidation to form submicron particles that were isolated and shown to be partially reduced ß-NiOOH by various techniques, which include SEM, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, XRD, and IR spectroscopy. These results suggest that the Ni complexes and salts act as precatalysts that decompose under oxidative conditions to form an active nickel oxide catalyst. The nature of this active oxide catalyst is discussed.

Alternate stresses and temperature variation as factors of influence of ultrasonic vibration on mechanical and functional properties of shape memory alloys.

It is known that the main factors in a variation in the shape memory alloy properties under insonation are heating of the material and alternate stresses action. In the present work the experimental study of the mechanical behaviour and functional properties of shape memory alloy under the action of alternate stresses and varying temperature was carried out. The data obtained had demonstrated that an increase in temperature of the sample resulted in a decrease or increase in deformation stress depending on the structural state of the TiNi sample. It was shown that in the case of the alloy in the martensitic state, a decrease in stress was observed, and on the other hand, in the austenitic state an increase in stress took place. It was found that action of alternate stresses led to appearance of strain jumps on the strain-temperature curves during cooling and heating the sample through the temperature range of martensitic transformation under the constant stress. The value of the strain jumps depended on the amplitude of alternate stresses and the completeness of martensitic transformation. It was shown that the heat action of ultrasonic vibration to the mechanical behaviour of shape memory alloys was due to the non-monotonic dependence of yield stress on the temperature. The force action of ultrasonic vibration to the functional properties was caused by formation of additional oriented martensite.

Fabrication process and electromagnetic wave absorption characterization of a CNT/Ni/epoxy nanocomposite.

Since carbon nanotube (CNT) was first discovered in 1991, it has been considered as a viable type of conductive filler for electromagnetic wave absorption materials in the GHz range. In this paper, pearl-necklace-structure CNT/Ni nano-powders were fabricated by a polyol process as conductive fillers. Compared to synthesized CNT, pearl-necklace Ni-decorated CNT increased the electrical conductivity by an order of 1 due to the enhancement of the Ni-conductive network. Moreover, the decorated Ni particles prevented the agglomeration of CNTs by counterbalancing the Van der Walls interaction between the CNTs. A CNT/Ni nanocomposite showed a homogeneous dispersion in an epoxy-based matrix. This enhanced physical morphology and electrical properties lead to an increase in the loss tangent and reflection loss in the CNT/Ni/Epoxy nanocomposite compared to these characteristics of a CNT/Epoxy nanocomposite in range of 8-12 GHz. The electromagnetic wave absorption properties of CNT/Ni/epoxy nanocomposites will provide enormous opportunities for electronic applications where lightweight EMI shielding or electro-magnetic wave absorption properties are necessary.

Selective actuation of arrays of carbon nanotubes using magnetic resonance.

We introduce the use of ferromagnetic resonance (FMR) to actuate mechanical resonances in as grown arrays of carbon nanotubes (CNTs) loaded with Ni particles (Ni-CNTs). This contactless method is closely related to the magnetic resonance force microscopy technique and provides spatial selectivity of actuation along the array. The Ni-CNT arrays are grown by chemical vapor deposition and are composed of homogeneous CNTs with uniform length (~600 nm) and almost equal diameter (~20 nm), which are loaded with Ni catalyst particles at their tips due to the tip growth mode. The vibrations of the Ni-CNTs are actuated by relying on the driving force that appears due to the FMR excited at about 2 GHz in the Ni particles (diameter ~100 nm). The Ni-CNT oscillations (frequency ~40 MHz) are detected mechanically by atomic force microscopy. The acquired oscillation images of the Ni-CNT uniform array reveal clear maxima in the spatial distribution of the oscillation amplitudes. We attribute these maxima to the "sensitive slices", i.e., the spatial regions of the Ni-CNT array where the FMR condition is met. Similar to magnetic resonance imaging, the sensitive slice is determined by the magnetic field gradient and moves along the Ni-CNT array as the applied magnetic field is ramped. Our excitation method does not require the presence of any additional microfabricated electrodes or coils near the CNTs and is particularly advantageous in cases where the traditional electrical actuation methods are not effective or cannot be implemented. The remote actuation can be effectively implemented also for arrays of other magnetic nanomechanical resonators.

In situ study of atomic structure transformations of Pt-Ni nanoparticle catalysts during electrochemical potential cycling.

When exposed to corrosive anodic electrochemical environments, Pt alloy nanoparticles (NPs) undergo selective dissolution of the less noble component, resulting in catalytically active bimetallic Pt-rich core-shell structures. Structural evolution of PtNi6 and PtNi3 NP catalysts during their electrochemical activation and catalysis was studied by in situ anomalous small-angle X-ray scattering to obtain insight in element-specific particle size evolution and time-resolved insight in the intraparticle structure evolution. Ex situ high-energy X-ray diffraction coupled with pair distribution function analysis was employed to obtain detailed information on the atomic-scale ordering, particle phases, structural coherence lengths, and particle segregation. Our studies reveal a spontaneous electrochemically induced formation of PtNi particles of ordered Au3Cu-type alloy structures from disordered alloy phases (solid solutions) concomitant with surface Ni dissolution, which is coupled to spontaneous residual Ni metal segregation during the activation of PtNi6. Pt-enriched core-shell structures were not formed using the studied Ni-rich nanoparticle precursors. In contrast, disordered PtNi3 alloy nanoparticles lose Ni more rapidly, forming Pt-enriched core-shell structures with superior catalytic activity. Our X-ray scattering results are confirmed by STEM/EELS results on similar nanoparticles.