A Genetic Engineering Toolbox for the Lignocellulolytic Anaerobic Gut Fungus Neocallimastix frontalis.

Anaerobic fungi are powerful platforms for biotechnology that remain unexploited due to a lack of genetic tools. These gut fungi encode the largest number of lignocellulolytic carbohydrate active enzymes (CAZymes) in the fungal kingdom, making them attractive for applications in renewable energy and sustainability. However, efforts to genetically modify anaerobic fungi have remained limited due to inefficient methods for DNA uptake and a lack of characterized genetic parts. We demonstrate that anaerobic fungi are naturally competent for DNA and leverage this to develop a nascent genetic toolbox informed by recently acquired genomes for transient transformation of anaerobic fungi. We validate multiple selectable markers (HygR and Neo), an anaerobic reporter protein (iRFP702), enolase and TEF1A promoters, TEF1A terminator, and a nuclear localization tag for protein compartmentalization. This work establishes novel methods to reliably transform the anaerobic fungus Neocallimastix frontalis, thereby paving the way for strain development and various synthetic biology applications.

Isolation, morphological identification, and xylanase characteristics of anaerobic gut fungi Neocallimastix from Anatolian wild goat.

This study shows the morphological identification of anaerobic fungal strains isolated from fecal samples of goats inhabiting Turkey and the effects of various metal ions and chemicals on extracellular xylanase production. Three different anaerobic gut fungi isolated from wild goats in Turkey were identified as Neocallimastix spp. xylanase, cellulase, and lichenase production were tested in culture supernatants, and the maximum-specific activities were found as 560.42 ± 9.39, 159.70 ± 3.88, and 157.36 ± 3.83 (µmol/min/mg protein), respectively. While the optimum temperature range of exo-xylanases was found as 40-50°C, their optimum pH range was determined as 6.0-6.5. Xylanase activity decreased in metal ions and other chemical reactants based on dose. The metal ion that significantly inhibited xylanase activity was Fe+3 . It was found that the ferric ions inhibited xylanase activity in all three anaerobic gut fungi by 30%-90% depending on molarity. On the contrary, the 1 mM concentrations of the Mn+2 , Ba+2 , Co+2 , Cu+2 , Sn+2 , and Mg+2 metal ions and the ethylenediaminetetraacetic acid and ß-mercaptoethanol reagents had a positive effect at rates in the range of 3%-92%. In conclusion, these findings demonstrate that anaerobic gut fungus has very stable fibrolytic enzymes that need to be separated, as well and the existence of a unique resource for industrial applications.

Immobilization of mutated xylanase from Neocallimastix patriciarum in E coli and application for kraft pulp biobleaching / Imobilização de xilanase mutada de Neocallimastix patriciarum em E coli e aplicação para polpa kraft

As an important enzyme, xylanase is widely used in the food, pulp, and textile industry. Different applications of xylanase warrant specific conditions including temperature and pH. This study aimed to carry out sodium alginate beads as carrier to immobilize previous reported mutated xylanase from Neocallimastix patriciarum which expressed in E. coli, the activity of immobilization of mutated xylanase was elevated about 4% at pH 6 and 13% at 62 °C. Moreover, the immobilized mutated xylanase retained a greater proportion of its activity than the wide type in thermostability. These properties suggested that the immobilization of mutated xylanase has potential to apply in biobleaching industry.

Como importante enzima, a xilanase é amplamente utilizada na indústria alimentícia, de celulose e têxtil. Diferentes aplicações de xilanase garantem condições específicas, incluindo temperatura e pH. Este estudo teve como objetivo realizar grânulos de alginato de sódio como carreador para imobilizar xilanase mutada relatada anteriormente de Neocallimastix patriciarum que expressa em E. coli, a atividade de imobilização da xilanase mutada foi elevada em cerca de 4% em pH 6 e 13% a 62 °C. Além disso, a xilanase mutada imobilizada reteve uma proporção maior de sua atividade do que o tipo amplo em termoestabilidade. Essas propriedades sugerem que a imobilização da xilanase mutada tem potencial para aplicação na indústria de biobranqueamento.

Immobilization of mutated xylanase from Neocallimastix patriciarum in E. coli and application for kraft pulp biobleaching / Imobilização de xilanase mutada de Neocallimastix patriciarum em E. coli e aplicação para polpa kraft

Abstract As an important enzyme, xylanase is widely used in the food, pulp, and textile industry. Different applications of xylanase warrant specific conditions including temperature and pH. This study aimed to carry out sodium alginate beads as carrier to immobilize previous reported mutated xylanase from Neocallimastix patriciarum which expressed in E. coli, the activity of immobilization of mutated xylanase was elevated about 4% at pH 6 and 13% at 62 °C. Moreover, the immobilized mutated xylanase retained a greater proportion of its activity than the wide type in thermostability. These properties suggested that the immobilization of mutated xylanase has potential to apply in biobleaching industry.

Resumo Como importante enzima, a xilanase é amplamente utilizada na indústria alimentícia, de celulose e têxtil. Diferentes aplicações de xilanase garantem condições específicas, incluindo temperatura e pH. Este estudo teve como objetivo realizar grânulos de alginato de sódio como carreador para imobilizar xilanase mutada relatada anteriormente de Neocallimastix patriciarum que expressa em E. coli, a atividade de imobilização da xilanase mutada foi elevada em cerca de 4% em pH 6 e 13% a 62 °C. Além disso, a xilanase mutada imobilizada reteve uma proporção maior de sua atividade do que o tipo amplo em termoestabilidade. Essas propriedades sugerem que a imobilização da xilanase mutada tem potencial para aplicação na indústria de biobranqueamento.

The Comparisons of Fatty Acid Composition in Some Anaerobic Gut Fungi Neocallimastix, Orpinomyces, Piromyces, and Caecomyces.

The objective of this study were to identify the fatty acid composition for decanoic (C10:0), tridecanoic (C13:0), myristic (C14:0), pentadecanoic (C15:0), palmitic (C16:0), stearic (C18:0), oleic (C18:1n9c), linoleic (C18:2n6c), arachidic (C20:0), arachidonic (C20:4n6), heneicosanoic (C21:0), erucic (C22:1n9) and Cis-4,7,10,13,16,19-docosahexaenoic (C22:6n3) acids by Neocallimastix, Orpinomyces, Caecomyces and Piromyces species of rumen fungus during in vitro culture. Fatty acid (FA) profi le of anaerobic fungi comprises carbon chains of length ranging from 10 to 22 were analyzed as methyl esters. Analysis of fatty acids was performed using Gas Chromatography-Mass Spectrophotometer (GC-MS). FA measures are presented as proportions of relative amounts (% total fatty acid). The highest amounts of fatty acids for all samples were found as myristic (C14:0) acid. The tridecanoic (C13:0) acid represented the second abundant FA in the fungi in all experimental groups. Stearic acid (C18:0) was the third major fatty acid for isolates investigated in the current study. In addition, another fatty acid was palmitic (C16:0) acid with relative amount representing >20 % of total FA in all samples. Pentadecanoic (C15:0) acid could not be found in any other samples except Orpinomyces sp. (GMLF5). It is concluded that biohydrogenation of fatty acid composition by anaerobic gut fungi are very variable.

Immobilization of mutated xylanase from Neocallimastix patriciarum in E. coli and application for kraft pulp biobleaching.

As an important enzyme, xylanase is widely used in the food, pulp, and textile industry. Different applications of xylanase warrant specific conditions including temperature and pH. This study aimed to carry out sodium alginate beads as carrier to immobilize previous reported mutated xylanase from Neocallimastix patriciarum which expressed in E. coli, the activity of immobilization of mutated xylanase was elevated about 4% at pH 6 and 13% at 62 °C. Moreover, the immobilized mutated xylanase retained a greater proportion of its activity than the wide type in thermostability. These properties suggested that the immobilization of mutated xylanase has potential to apply in biobleaching industry.

A Comparative Study to Decipher the Structural and Dynamics Determinants Underlying the Activity and Thermal Stability of GH-11 Xylanases.

With the growing need for renewable sources of energy, the interest for enzymes capable of biomass degradation has been increasing. In this paper, we consider two different xylanases from the GH-11 family: the particularly active GH-11 xylanase from Neocallimastix patriciarum, NpXyn11A, and the hyper-thermostable mutant of the environmentally isolated GH-11 xylanase, EvXyn11TS. Our aim is to identify the molecular determinants underlying the enhanced capacities of these two enzymes to ultimately graft the abilities of one on the other. Molecular dynamics simulations of the respective free-enzymes and enzyme-xylohexaose complexes were carried out at temperatures of 300, 340, and 500 K. An in-depth analysis of these MD simulations showed how differences in dynamics influence the activity and stability of these two enzymes and allowed us to study and understand in greater depth the molecular and structural basis of these two systems. In light of the results presented in this paper, the thumb region and the larger substrate binding cleft of NpXyn11A seem to play a major role on the activity of this enzyme. Its lower thermal stability may instead be caused by the higher flexibility of certain regions located further from the active site. Regions such as the N-ter, the loops located in the fingers region, the palm loop, and the helix loop seem to be less stable than in the hyper-thermostable EvXyn11TS. By identifying molecular regions that are critical for the stability of these enzymes, this study allowed us to identify promising targets for engineering GH-11 xylanases. Eventually, we identify NpXyn11A as the ideal host for grafting the thermostabilizing traits of EvXyn11TS.

Identification of Oxygen-Independent Pathways for Pyridine Nucleotide and Coenzyme A Synthesis in Anaerobic Fungi by Expression of Candidate Genes in Yeast.

Neocallimastigomycetes are unique examples of strictly anaerobic eukaryotes. This study investigates how these anaerobic fungi bypass reactions involved in synthesis of pyridine nucleotide cofactors and coenzyme A that, in canonical fungal pathways, require molecular oxygen. Analysis of Neocallimastigomycetes proteomes identified a candidate l-aspartate-decarboxylase (AdcA) and l-aspartate oxidase (NadB) and quinolinate synthase (NadA), constituting putative oxygen-independent bypasses for coenzyme A synthesis and pyridine nucleotide cofactor synthesis. The corresponding gene sequences indicated acquisition by ancient horizontal gene transfer (HGT) events involving bacterial donors. To test whether these enzymes suffice to bypass corresponding oxygen-requiring reactions, they were introduced into fms1Δ and bna2Δ Saccharomyces cerevisiae strains. Expression of nadA and nadB from Piromyces finnis and adcA from Neocallimastix californiae conferred cofactor prototrophy under aerobic and anaerobic conditions. This study simulates how HGT can drive eukaryotic adaptation to anaerobiosis and provides a basis for elimination of auxotrophic requirements in anaerobic industrial applications of yeasts and fungi. IMPORTANCE NAD (NAD+) and coenzyme A (CoA) are central metabolic cofactors whose canonical biosynthesis pathways in fungi require oxygen. Anaerobic gut fungi of the Neocallimastigomycota phylum are unique eukaryotic organisms that adapted to anoxic environments. Analysis of Neocallimastigomycota genomes revealed that these fungi might have developed oxygen-independent biosynthetic pathways for NAD+ and CoA biosynthesis, likely acquired through horizontal gene transfer (HGT) from prokaryotic donors. We confirmed functionality of these putative pathways under anaerobic conditions by heterologous expression in the yeast Saccharomyces cerevisiae. This approach, combined with sequence comparison, offers experimental insight on whether HGT events were required and/or sufficient for acquiring new traits. Moreover, our results demonstrate an engineering strategy for enabling S. cerevisiae to grow anaerobically in the absence of the precursor molecules pantothenate and nicotinate, thereby contributing to alleviate oxygen requirements and to move closer to prototrophic anaerobic growth of this industrially relevant yeast.

Anaerobic gut fungi are an untapped reservoir of natural products.

Anaerobic fungi (class Neocallimastigomycetes) thrive as low-abundance members of the herbivore digestive tract. The genomes of anaerobic gut fungi are poorly characterized and have not been extensively mined for the biosynthetic enzymes of natural products such as antibiotics. Here, we investigate the potential of anaerobic gut fungi to synthesize natural products that could regulate membership within the gut microbiome. Complementary 'omics' approaches were combined to catalog the natural products of anaerobic gut fungi from four different representative species: Anaeromyces robustus (Arobustus), Caecomyces churrovis (Cchurrovis), Neocallimastix californiae (Ncaliforniae), and Piromyces finnis (Pfinnis). In total, 146 genes were identified that encode biosynthetic enzymes for diverse types of natural products, including nonribosomal peptide synthetases and polyketide synthases. In addition, N. californiae and C. churrovis genomes encoded seven putative bacteriocins, a class of antimicrobial peptides typically produced by bacteria. During standard laboratory growth on plant biomass or soluble substrates, 26% of total core biosynthetic genes in all four strains were transcribed. Across all four fungal strains, 30% of total biosynthetic gene products were detected via proteomics when grown on cellobiose. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) characterization of fungal supernatants detected 72 likely natural products from A. robustus alone. A compound produced by all four strains of anaerobic fungi was putatively identified as the polyketide-related styrylpyrone baumin. Molecular networking quantified similarities between tandem mass spectrometry (MS/MS) spectra among these fungi, enabling three groups of natural products to be identified that are unique to anaerobic fungi. Overall, these results support the finding that anaerobic gut fungi synthesize natural products, which could be harnessed as a source of antimicrobials, therapeutics, and other bioactive compounds.

Improving the Thermostability of a Fungal GH11 Xylanase via Fusion of a Submodule (C2) from Hyperthermophilic CBM9_1-2.

Xylanases have been applied in many industrial fields. To improve the activity and thermostability of the xylanase CDBFV from Neocallimastix patriciarum (GenBank accession no. KP691331), submodule C2 from hyperthermophilic CBM9_1-2 was inserted into the N- and/or C-terminal regions of the CDBFV protein (producing C2-CDBFV, CDBFV-C2, and C2-CDBFV-C2) by genetic engineering. CDBFV and the hybrid proteins were successfully expressed in Escherichia coli BL21 (DE3). Enzymatic property analysis indicates that the C2 submodule had a significant effect on enhancing the thermostability of the CDBFV. At the optimal temperature (60.0 °C), the half-lives of the three chimeras C2-CDBFV, CDBFV-C2, and C2-CDBFV-C2 are 1.5 times (37.5 min), 4.9 times (122.2 min), and 3.8 times (93.1 min) longer than that of wild-type CDBFV (24.8 min), respectively. More importantly, structural analysis and molecular dynamics (MD) simulation revealed that the improved thermal stability of the chimera CDBFV-C2 was on account of the formation of four relatively stable additional hydrogen bonds (S42-S462, T59-E277, S41-K463, and S44-G371), which increased the protein structure's stability. The thermostability characteristics of CDBFV-C2 make it a viable enzyme for industrial applications.

Enhancing thermal tolerance of a fungal GH11 xylanase guided by B-factor analysis and multiple sequence alignment.

Xylanases, capable of hydrolyzing xylans which are abundant in nature, have been employed as important biocatalyst in many industrial processes. Xylanases with advantageous properties, especially excellent thermostability, are in high demand in industry. In this study, we aim to improve the thermostability of XynCDBFV, a fungal GH11 xylanase. To achieve this aim, we discovered residues 87-QNSS-90 with pronounced flexibility based on B-factor analysis, identified highly conserved residues 87-RGHT-90 in GH11 xylanases by multiple sequence alignment, and constructed four single mutants by substituting residues from 87 to 90 by site-directed mutagenesis. Temperature stability measurements showed promising enhancement of thermostability for all four single mutants, and the thermal tolerant ability from strong to weak is N88 G, S90 T, S89H, Q87R, XynCDBFV. Four single mutants all retained higher than 50% activities after incubation at the optimal temperature 60℃ for 1 h, while the retained activity for XynCDBFV was only 20.94% at the same condition. N88 G retained greater than 60% residual activity after incubation at 65℃ for 1 h, while the residual activity of XynCDBFV decreased rapidly, losing all activity after 45 min of incubation. Molecular dynamics simulations and structural analysis were applied to explore the heat-resistant mechanisms for mutants: novel hydrogen bonding interaction were discovered and accounted for the improved thermostability. Enzyme activity of the single mutants compromised with their thermostability and combined mutations displayed antagonistic effect due to the closed contact of the mutated residues. This study confirms that combining B-factor analysis and multiple sequence alignment is an effective strategy for obtaining a thermostable enzyme, and the negative findings help to recognize limitations in xylanase engineering for preferable properties.

Changing surface grafting density has an effect on the activity of immobilized xylanase towards natural polysaccharides.

Enzymes are involved in various types of biological processes. In many cases, they are part of multi-component machineries where enzymes are localized in close proximity to each-other. In such situations, it is still not clear whether inter-enzyme spacing actually plays a role or if the colocalization of complementary activities is sufficient to explain the efficiency of the system. Here, we focus on the effect of spatial proximity when identical enzymes are immobilized onto a surface. By using an innovative grafting procedure based on the use of two engineered protein fragments, Jo and In, we produce model systems in which enzymes are immobilized at surface densities that can be controlled precisely. The enzyme used is a xylanase that participates to the hydrolysis of plant cell wall polymers. By using a small chromogenic substrate, we first show that the intrinsic activity of the enzymes is fully preserved upon immobilization and does not depend on surface density. However, when using beechwood xylan, a naturally occurring polysaccharide, as substrate, we find that the enzymatic efficiency decreases by 10-60% with the density of grafting. This unexpected result is probably explained through steric hindrance effects at the nanoscale that hinder proper interaction between the enzymes and the polymer. A second effect of enzyme immobilization at high densities is the clear tendency for the system to release preferentially shorter oligosaccharides from beechwood xylan as compared to enzymes in solution.

Accelerated biogas production from lignocellulosic biomass after pre-treatment with Neocallimastix frontalis.

Two Neocallimastix frontalis strains, isolated from rumen fluid of a cow and of a chamois, were assessed for their ability to degrade lignocellulosic biomass. Two independent batch experiments were performed. Each experiment was split into two phases: hydrolysis phase and batch fermentation phase. The hydrolysis process during the N. frontalis incubation led to an initial increase of biogas production, an accelerated degradation of dry matter and an increased concentration of volatile fatty acids. As monitored by quantitative PCR, the applied N. frontalis strains were present and transcriptionally active during the hydrolysis phase but were fading during the batch fermentation phase. Thus, a separate hydrolytic pretreatment phase with anaerobic fungi, such as N. frontalis, represents a feasible strategy to improve biogas production from lignocellulosic substrates.

Engineering improved thermostability of the GH11 xylanase from Neocallimastix patriciarum via computational library design.

Xylanases, which cleave the ß-1,4-glycosidic bond between xylose residues to release xylooligosaccharides (XOS), are widely used as food additives, animal feeds, and pulp bleaching agents. However, the thermally unstable nature of xylanases would hamper their industrial application. In this study, we used in silico design in a glycoside hydrolase family (GH) 11 xylanase to stabilize the enzyme. A combination of the best mutations increased the apparent melting temperature by 14 °C and significantly enhanced thermostability and thermoactivation. The variant also showed an upward-shifted optimal temperature for catalysis without compromising its activity at low temperatures. Moreover, a 10-fold higher XOS production yield was obtained at 70 °C, which compensated the low yield obtained with the wild-type enzyme. Collectively, the variant constructed by the computational strategy can be used as an efficient biocatalyst for XOS production at industrially viable conditions.

Metabolic characterization of anaerobic fungi provides a path forward for bioprocessing of crude lignocellulose.

The conversion of lignocellulose-rich biomass to bio-based chemicals and higher order fuels remains a grand challenge, as single-microbe approaches often cannot drive both deconstruction and chemical production steps. In contrast, consortia based bioprocessing leverages the strengths of different microbes to distribute metabolic loads and achieve process synergy, product diversity, and bolster yields. Here, we describe a biphasic fermentation scheme that combines the lignocellulolytic action of anaerobic fungi isolated from large herbivores with domesticated microbes for bioproduction. When grown in batch culture, anaerobic fungi release excess sugars from both cellulose and crude biomass due to a wealth of highly expressed carbohydrate active enzymes (CAZymes), converting as much as 49% of cellulose to free glucose. This sugar-rich hydrolysate readily supports growth of Saccharomyces cerevisiae, which can be engineered to produce a range of value-added chemicals. Further, construction of metabolic pathways from transcriptomic data reveals that anaerobic fungi do not catabolize all sugars that their enzymes hydrolyze from biomass, leaving other carbohydrates such as galactose, arabinose, and mannose available as nutritional links to other microbes in their consortium. Although basal expression of CAZymes in anaerobic fungi is high, it is drastically amplified by cellobiose breakout products encountered during biomass hydrolysis. Overall, these results suggest that anaerobic fungi provide a nutritional benefit to the rumen microbiome, which can be harnessed to design synthetic microbial communities that compartmentalize biomass degradation and bioproduct formation.

Comparative Evaluation of the Artefacts Index of Dental Materials on Two-Dimensional Cone-beam Computed Tomography.

The aim of the study was to propose the artefact index on cone-beam computed tomography (CBCT) images of clinical prosthodontics materials, and to compare the effect of the artefacts on CBCT image clarity of normal oral tissues. Seven spheres of different materials were secured on the centre of a resin baseboard, respectively, and four human molars in vitro were placed at 10 mm front, back, left and right of the sphere. The board was scanned using CBCT with the same setting. 10 tomographic images from each of the seven data sets with clear artefacts was selected. The grayscale measuring tool of Photoshop software was used to measure the grayscale (G0) within the boundary of tomographic image and the grayscales of the streaky artefacts that were 1 mm and 20 mm outside the circular boundary (G1 and G2). The arc length, L1, of the circular boundary with artefacts was measured; the circumference, L2, was calculated. The artefact index, A, was determined as (G1/G0) × 0.5 + (G2/G1) × 0.4 + (L2/L1) × 0.1. The artefact index A can comprehensively represent the effect of artefacts on CBCT image clarity for oral tissue.

Effects of dietary addition of cellulase and a Saccharomyces cerevisiae fermentation product on nutrient digestibility, rumen fermentation and enteric methane emissions in growing goats.

This study was designed to assess the effectiveness of dietary cellulase (243 U/g, derived from Neocallimastix patriciarum) and a Saccharomyces cerevisiae fermentation product (yeast product) on ruminal fermentation characteristics, enteric methane (CH4) emissions and methanogenic community in growing goats. The experiment was conducted in a 5 × 5 Latin square design using five Xiangdong black wether goats. The treatments included a Control and two levels of cellulase (0.8 g and 1.6 g/kg dry matter intake (DMI), i.e. 194 U/kg and 389 U/kg DMI, respectively) crossed over with two levels (6 g or 12 g/kg DMI) of the yeast product. There were no significant differences regarding feed intake, apparent digestibility of organic matter, neutral detergent fibre and acid detergent fibre among all the treatments. In comparison with the Control, the ruminal ammonia N concentration was decreased (p = 0.001) by cellulase and yeast product addition. The activities of carboxymethylcellulase and xylanase were decreased after cellulase addition. Moreover, dietary cellulase and yeast product addition led to a significant reduction (p < 0.05) of enteric CH4 emissions although the diversity and copy numbers of methanogens among treatments were not dissimilar. The present results indicate that the combination of cellulase and yeast fermentation product can reduce the production of CH4 energy and mitigate the enteric CH4 emissions to a certain degree.

Fiber degradation potential of natural co-cultures of Neocallimastix frontalis and Methanobrevibacter ruminantium isolated from yaks (Bos grunniens) grazing on the Qinghai Tibetan Plateau.

Several natural anaerobic fungus-methanogen co-cultures have been isolated from rumen and feces source of herbivores with strong fiber degrading ability. In this study, we isolated 7 Neocallimastix with methanogen co-cultures from the rumen of yaks grazing on the Qinghai Tibetan Plateau. Based on morphological characteristics and internal transcribed spacer 1 sequences (ITS1), all the fungi were identified as Neocallimastix frontalis. The co-cultures were confirmed as the one fungus - one methanogen pattern by the PCR-denatured gradient gel electrophoresis (DGGE) assay. All the methanogens were identified as Methanobrevibacter ruminantium by 16s rRNA gene sequencing. We investigated the biodegrading capacity of the co-culture (N. frontalis + M. ruminantium) Yaktz1 on wheat straw, corn stalk and rice straw in a 7 days-incubation. The in vitro dry matter digestibility (IVDMD), acid detergent fiber digestibility (ADFD) and neural detergent fiber digestibility (NDFD) values of the substrates in the co-culture were significantly higher than those in the mono-culture N. frontalis Yaktz1. The co-culture exhibited high polysaccharide hydrolase (xylanase and FPase) and esterase activities. The xylanase in the co-culture reached the highest activity of 12500 mU/ml on wheat straw at the day 3 of the incubation. At the end of the incubation, 3.00 mmol-3.29 mmol/g dry matter of methane were produced by the co-culture. The co-culture also produced high level of acetate (40.00 mM-45.98 mM) as the end-product during the biodegradation. Interestingly, the N. frontalis Yaktz1 mono-culture produced large amount of lactate (8.27 mM-11.60 mM) and ethanol (163.11 mM-242.14 mM), many times more than those recorded in the previously reported anaerobic fungi. Our data suggests that the (N. frontalis + M. ruminantium) Yaktz1 co-culture and the N. frontalis Yaktz1 mono-culture both have great potentials for different industrial use.

The effect of anaerobic fungal inoculation on the fermentation characteristics of rice straw silages.

AIMS: To identify whether the supplement of anaerobic fungi isolates with cellulolytic activities accelerates the silage fermentation. METHODS AND RESULTS: Three fungal isolates with the highest cellulolytic activities among 45 strains of anaerobic fungal stock in our laboratory were selected and used as silage inoculants. The rice straw (RS) was ensiled for 10, 30, 60, 90 and 120 days with four treatments of anaerobic fungi derived from the control (no fungus), Piromyces M014 (isolated from the rumen of the Korean native goat), Orpinomyces R001 (isolated from the duodenum of Korean native cattle) and Neocallimastix M010 (isolated from the guts of termites), respectively. The silages inoculated with pure strains of fungi showed a higher fungal population (P < 0.05) when compared to the control silage. In situ ruminal DM disappearance of RS silage (RSS) was improved with fungal treatment. SEM observation showed live fungal cells inoculated in RS could survive during the ensiling process. Overall, this study indicated that the inoculation of anaerobic fungi decreased the cell wall content of the RSS and increased in situ dry matter disappearance. CONCLUSIONS: The supplementation of anaerobic fungi isolates to RSS as a silage inoculant improves the RSS quality. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first study showing the potential application of supplement of anaerobic fungi isolated from the guts may be applied industrially as an alternate feed additive that improves the silage quality.

Purification and characterization of a cellulolytic multienzyme complex produced by Neocallimastix patriciarum J11.

Understanding the roles of the components of the multienzyme complex of the anaerobial cellulase system, acting on complex substrates, is crucial to the development of efficient cellulase systems for industrial applications such as converting lignocellulose to sugars for bioethanol production. In this study, we purified the multienzyme complex of Neocallimastix patriciarum J11 from a broth through cellulose affinity purification. The multienzyme complex is composed of at least 12 comprised proteins, based on sodium dodecyl sulfate polyacrylamide gel electrophoresis. Eight of these constituents have demonstrated ß-glucanase activity on zymogram analysis. The multienzyme complex contained scaffoldings that respond to the gathering of the cellulolytic components. The levels and subunit ratio of the multienzyme complex from N. patriciarum J11 might have been affected by their utilized carbon sources, whereas the components of the complexes were consistent. The trypsin-digested peptides of six proteins were matched to the sequences of cellulases originating from rumen fungi, based on identification through liquid chromatography/mass spectrometry, revealing that at least three types of cellulase, including one endoglucanase and two exoglucanases, could be found in the multienzyme complex of N. patriciarum J11. The cellulolytic subunits could hydrolyze synergistically on both the internal bonds and the reducing and nonreducing ends of cellulose. Based on our research, our findings are the first to depict the composition of the multienzyme complex produced by N. patriciarum J11, and this complex is composed of scaffoldin and three types of cellulase.